Static driver look-up tables
All _pars variables are of NC_FLOAT type.
| nalbedo_pars | Units | Description
|
|---|
| 0 | 1 | Broadband albedo of surface elements (wall fraction in case of building) at (y,x).
|
| 1 | 1 | Only for buildings. Longwave albedo of wall fraction at (y,x).
|
| 2 | 1 | Only for buildings. Shortwave albedo of wall fraction at (y,x).
|
| 3 | 1 | Only for buildings. Longwave albedo of green fraction at (y,x).
|
| 4 | 1 | Only for buildings. Shortwave albedo of green fraction at (y,x).
|
| 5 | 1 | Only for buildings. Longwave albedo of window fraction at (y,x).
|
| 6 | 1 | Only for buildings. Shortwave albedo of window fraction at (y,x).
|
| nsoil_pars | Units | Description
|
|---|
| 0 | 1 | Van Genuchten parameter α
|
| 1 | 1 | Van Genuchten parameter l
|
| 2 | 1 | Van Genuchten parameter n
|
| 3 | m/s | Saturation hydraulic conductivity
|
| 4 | m³/m³ | Saturation soil moisture
|
| 5 | m³/m³ | Field capacity
|
| 6 | m³/m³ | Wilting point
|
| 7 | m³/m³ | Residual moisture
|
| nvegetation_pars | Units | Descripton
|
|---|
| 0 | s/m | Minimum canopy resistance
|
| 1 | m³/m³ | Leaf area index
|
| 2 | 1 | Vegetation coverage
|
| 3 | 1/hPa | Canopy resistance coefficient
|
| 4 | m | Roughness length for momentum
|
| 5 | m | Roughness length for heat
|
| 6 | W/m²/K | Skin lacer heat conductivity (stable conditions)
|
| 7 | W/m²/K | Skin layer heat conductivity (unstable conditions)
|
| 8 | 1 | Fraction of incoming shortwave radiation transmitted directly to the soil (not implemented yet)
|
| 9 | J/m²/K | Heat capacity of the surface
|
| 10 | 1 | albedo_type
|
| 11 | 1 | Surface emissivity
|
| nwater_pars | Units | Description
|
|---|
| 0 | K | Water temperature
|
| 1 | m | Roughness length for momentum
|
| 2 | m | Roughness length for heat
|
| 3 | W/m²/K | Heat conductivity between skin layer and water (stable conditions)
|
| 4 | W/m²/K | Heat conductivity between skin layer and water (unstable conditions)
|
| 5 | 1 | albedo_type
|
| 6 | 1 | Surface emissivity
|
