Changes between Version 431 and Version 432 of doc/app/initialization_parameters

Timestamp:

Sep 10, 2019 6:01:16 PM (5 years ago)

Author:

gronemeier

Comment:

--

doc/app/initialization_parameters

@@ -2176 +2176 @@
 Parameter for switching on data output in the spinup phase (see [#spinup_time spinup_time]). If set to .TRUE. timeseries and profile data will be output at regular intervals as prescribed by the user. Note that there will be no output of 2D/3D/masked data during the spinup phase.
 
-For radiation calculations during spinup, a starting time is calculated based on the setting of [#time_utc_init time_utc_init] and [#spinup_time spinup_time], so that the spinup starts at {{{time_utc_init - spinup_time}}}. The coupled run then starts at {{{time_utc_init}}}. In the output data, the timestamps during spinup will show negative values in the output data so that the coupled model system starts at timestamp 0 s.
-}}}
-|----------------
-{{{#!td style="vertical-align:top"
-[=#day_of_year_init '''day_of_year_init''']
-}}}
-{{{#!td style="vertical-align:top"
-I
-}}}
-{{{#!td style="vertical-align:top"
-172
-}}}
-{{{#!td
-Day of the year (1-365) at model start. The default value is 172 (June 21).
+For radiation calculations during spinup, a starting time is calculated based on the setting of [#origin_date_time origin_date_time], so that the spinup starts at {{{origin_date_time - spinup_time}}}. The coupled run then starts at {{{origin_date_time}}}. In the output data, the timestamps during spinup will show negative values in the output data so that the coupled model system starts at timestamp 0 s.
 }}}
 |----------------
@@ -2344 +2331 @@
 |----------------
 {{{#!td style="vertical-align:top"
+[=#origin_date_time '''origin_date_time''']
+}}}
+{{{#!td style="vertical-align:top"
+C
+}}}
+{{{#!td style="vertical-align:top"
+'2019-06-21 12:00:00 +00'
+}}}
+{{{#!td
+Date and time at model start. The default is set to 21st of June 2019 at 12UTC (noon).
+}}}
+|----------------
+{{{#!td style="vertical-align:top"
 [=#pt_surface '''pt_surface''']
 }}}
@@ -2586 +2586 @@
 Height level from which on the scalar gradient defined by [#s_vertical_gradient s_vertical_gradient] is effective (in m).\\\\
 The height levels are to be assigned in ascending order. The default values result in a scalar concentration constant with height regardless of the values of s_vertical_gradient (unless the top boundary of the model is higher than 100000.0 m). For the piecewise construction of scalar concentration profiles see [#s_vertical_gradient s_vertical_gradient].
-}}}
-|----------------
-{{{#!td style="vertical-align:top"
-[=#time_utc_init '''time_utc_init''']
-}}}
-{{{#!td style="vertical-align:top"
-R
-}}}
-{{{#!td style="vertical-align:top"
-43200.0
-}}}
-{{{#!td
-UTC time at model start in seconds starting from midnight, The default value is {{{43200.0}}} (12 p.m., noon).
 }}}
 |----------------