Changes between Version 387 and Version 388 of doc/app/initialization_parameters

Timestamp:

May 24, 2018 11:03:34 AM (7 years ago)

Author:

schwenkel

Comment:

--

doc/app/initialization_parameters

@@ -2224 +2224 @@
 '' 'initialize_ptanom' ''\\\\
       A 2d-Gauss-like shape disturbance (x,y) is added to the initial temperature field with radius 10.0 * [#dx dx] and center at jc = ([#nx nx]+1)/2. This may be used for tests of scalar advection schemes (see [#scalar_advec scalar_advec]). Such tests require a horizontal wind profile constant with height and diffusion switched off (see '' 'initialize_vortex' ''). Additionally, the buoyancy term must be switched off in the equation of motion  for w (this requires the user to comment out the call of buoyancy in the source code of {{{prognostic_equations.f90}}}).\\\\
+'' 'initialize_bubble' ''\\\\
+      A 2d-Gauss-like shaped perturbation (y,z) of 0.4K is added to the initial temperature field at a height of 150m and in the middle concerning the y-direction. The temperature perturbation decreases with a standard deviation of 300m and 150m in y-direction and z-direction, respectively. This method might be very helpful to induce a rising warm air bubble producing clouds in a humid environment.\\\\
 '' 'cyclic_fill' ''\\\\
       Here, 3d-data from a precursor run are read by the initial (main) run. The precursor run is allowed to have a smaller domain along x and y compared with the main run. Also, different numbers of processors can be used for these two runs. Limitations are that the precursor run must use cyclic horizontal boundary conditions and that the number of vertical grid points, [#nz nz], must be same for the precursor run and the main run. If the total domain of the main run is larger than that of the precursor run, the domain is filled by cyclic repetition of the (cyclic) precursor data. This initialization method is required if a turbulent inflow is used (see [#turbulent_inflow turbulent_inflow]). 3d-data must be made available to the run by activating an appropriate file connection statement for local file [../iofiles#BININ BININ]. The usage of a turbulent inflow is explained [../examples/turbinf here]. \\ Note that in case of [#reference_state reference_state]='' 'initial_profile','' the main run uses the initial profile of the precursor run. \\\\