Changes between Version 353 and Version 354 of doc/app/initialization_parameters

Timestamp:

Aug 9, 2017 11:27:03 AM (7 years ago)

Author:

Giersch

Comment:

--

doc/app/initialization_parameters

@@ -139 +139 @@
 '' 'initial_profiles' ''\\\\
       The target volume flow is calculated at t=0 from the initial profiles of u and v. This option is also standard for non-cyclic lateral boundary conditions ([#bc_lr bc_lr] /= '' 'cyclic' '' or [#bc_ns bc_ns] /= '' 'cyclic{{{'}}}'') because the (spanwise averaged) inflow profiles do not vary with time and are identical with the initial profiles.\\\\
-'' 'inflow_profile' ''\\\\
-      The target volume flow is calculated at every time step from the inflow profile of u or v, respectively. This setting is only allowed for non-cyclic lateral boundary conditions ([#bc_lr bc_lr] /= '' 'cyclic' '' or [#bc_ns bc_ns] /= '' 'cyclic{{{'}}}''). '''This option is not implemented so far, because at this time (spanwise averaged) inflow profiles do not vary with time in the standard code.'''\\\\
 '' 'bulk_velocity' ''\\\\
       The target volume flow is calculated from a predefined bulk velocity (see [#u_bulk u_bulk] and [#v_bulk v_bulk]). This setting is only allowed for cyclic lateral boundary conditions  .\\\\