Changes between Version 262 and Version 263 of doc/app/initialization_parameters

Timestamp:

Oct 27, 2015 7:28:52 AM (9 years ago)

Author:

maronga

Comment:

--

doc/app/initialization_parameters

@@ -1909 +1909 @@
 }}}
 {{{#!td style="vertical-align:top"
-'as_in_3d_model'
+'detering'
 }}}
 {{{#!td
 Calculation method for the energy dissipation term in the TKE equation of the [../../tec/1dmodel 1d-model].\\\\
-By default the dissipation is calculated as in the 3d-model using diss = (0.19 + 0.74 * l / l_grid) * e{{{**}}}1.5 / l.\\\\
-Setting '''dissipation_1d''' = '' 'detering' '' forces the dissipation to be calculated as diss = 0.064 * e{{{**}}}1.5 / l.
+By default (since r1691) '''dissipation_1d''' = '' 'detering' '' forces the dissipation to be calculated as diss = 0.064 * e{{{**}}}1.5 / l.\\\\
+When setting '''dissipation_1d''' = '' 'as_in_3d_model' '' (default before r1691), the dissipation is calculated as in the 3d-model using diss = (0.19 + 0.74 * l / l_grid) * e{{{**}}}1.5 / l.
 }}}
 |----------------
@@ -2028 +2028 @@
 }}}
 {{{#!td style="vertical-align:top"
-'as_in_3d_model'
+'blackadar'
 }}}
 {{{#!td
 Mixing length used in the [../../tec/1dmodel 1d-model].\\\\
-By default the mixing length is calculated as in the 3d-model (i.e. it depends on the grid spacing).\\\\
-By setting '''mixing_length_1d''' = '' 'blackadar','' the so-called Blackadar mixing length is used (l = kappa * z / ( 1 + kappa * z / lambda ) with the limiting value lambda = 2.7E-4 * u_g / f).
+By default, '''mixing_length_1d''' = '' 'blackadar','' the so-called Blackadar mixing length is used (l = kappa * z / ( 1 + kappa * z / lambda ) with the limiting value lambda = 2.7E-4 * u_g / f).\\\\
+By setting '''mixing_length_1d''' = '' 'as_in_3d_model','' the mixing length is calculated as in the 3d-model (i.e. it depends on the grid spacing).
 }}}
 |----------------