Changes between Version 128 and Version 129 of doc/app/initialization_parameters

Timestamp:

Nov 7, 2010 10:37:49 AM (14 years ago)

Author:

gryschka

Comment:

--

doc/app/initialization_parameters

@@ -83 +83 @@
       The target volume flow is calculated at t=0 from the initial profiles of u and v. \\\\
 '' 'inflow_profile' ''\\\\
-      The target volume flow is calculated at every timestep from the inflow profile of u or v, respectively. This setting is only allowed for non-cyclic lateral boundary conditions (bc_lr /= '' 'cyclic' '' or bc_ns /= '' 'cyclic{{{'}}}''). '''This option is not implemented so far, because at this time the inflow profiles do not vary with time.'''\\\\
+      The target volume flow is calculated at every timestep from the inflow profile of u or v, respectively. This setting is only allowed for non-cyclic lateral boundary conditions (bc_lr /= '' 'cyclic' '' or bc_ns /= '' 'cyclic{{{'}}}''). '''This option is not implemented so far, because at this time (spanwise averaged) inflow profiles do not vary with time in the standard code.'''\\\\
 '' 'bulk_velocity' ''\\\\
       The target volume flow is calculated from a predefined bulk velocity (see [#u_bulk u_bulk] and [#v_bulk v_bulk]). This setting is only allowed for cyclic lateral boundary conditions (bc_lr = '' 'cyclic' '' and bc_ns = '' 'cyclic{{{'}}}'').\\\\