Changes between Version 22 and Version 23 of doc/app/examples/cbl

Timestamp:

Jun 17, 2019 7:41:29 AM (6 years ago)

Author:

Giersch

Comment:

--

doc/app/examples/cbl

@@ -39 +39 @@
 Instantaneous cross section data of vertical velocity (''w'') and potential temperature (''pt'') are to be output for horizontal (''xy'') and vertical (''xz'') cross sections, and additionally, time averaged (''av'') vertical cross section data are to be output for the vertical velocity: [../../d3par#data_output data_output]'' = 'w_xy', 'w_xz', 'w_xz_av', 'theta_xy', 'theta_xz'.'' Output of instantaneous (time averaged) data is done after each ''900 (1800)s'': [../../d3par#dt_data_output dt_data_output]'' = 900.0,'' [../../d3par#dt_data_output_av  dt_data_output_av]'' = 1800.0.'' The averaged data are time averaged over the last ''900.0 s'', where the temporal interval of data entering the average is ''10 s'': [../../d3par#averaging_interval averaging_interval]'' = 900.0,'' [../../d3par#dt_averaging_input dt_averaging_input]'' = 10.0.'' Horizontal cross sections are output for vertical levels with grid index ''k=2'' and ''k=10,'' vertical cross sections are output for index ''j=20'': [../../d3par#section_xy section_xy]'' = 2, 10, '' [../../d3par#section_xz section_xz]'' = 20.'' For runs on more than one processor, cross section data are collected and output on PE0: [../../d3par#data_output_2d_on_each_pe data_output_2d_on_each_pe]'' = .F.''. 
 
-Output of vertical profiles is to be done after each ''900 s''. The profiles shall be temporally averaged over the last ''600 s'', whereby the temporal interval of the profiles entering the average has to be ''10 s'': [../../d3par#dt_dopr dt_dopr]'' = 900.0 s,'' [../../d3par#averaging_interval_pr averaging_interval_pr]'' = 600.0 s'', [../../d3par#dt_averaging_input_pr dt_averaging_input_pr]'' = 10.0 s.'' The temperature profile including the initial temperature profile (therefore'' '#theta' ''), the subgrid scale, resolved and total vertical sensible heat flux as well as the variances of the vertical velocity and the potential temperature are to be output:  [../../d3par#data_output_pr data_output_pr]'' = '#theta', 'w"theta”', 'w*theta*', 'wtheta', 'w*2', 'pt*2'.'' 
+Output of vertical profiles is to be done after each ''900 s''. The profiles shall be temporally averaged over the last ''600 s'', whereby the temporal interval of the profiles entering the average has to be ''10 s'': [../../d3par#dt_dopr dt_dopr]'' = 900.0 s,'' [../../d3par#averaging_interval_pr averaging_interval_pr]'' = 600.0 s'', [../../d3par#dt_averaging_input_pr dt_averaging_input_pr]'' = 10.0 s.'' The temperature profile including the initial temperature profile (therefore'' '#theta' ''), the subgrid scale, resolved and total vertical sensible heat flux as well as the variances of the vertical velocity and the potential temperature are to be output:  [../../d3par#data_output_pr data_output_pr]'' = '#theta', 'w"theta”', 'w*theta*', 'wtheta', 'w*2', 'theta*2'.''