Changeset 258 for palm/trunk/DOC
- Timestamp:
- Mar 13, 2009 12:36:03 PM (16 years ago)
- File:
-
- 1 edited
-
palm/trunk/DOC/tec/message_identifiers (modified) (1 diff)
Legend:
- Unmodified
- Added
- Removed
-
palm/trunk/DOC/tec/message_identifiers
r257 r258 169 169 and data_output_user exceeds the limit of 100 170 170 PA0103 output of "..." requires constant_diffusion = .FALSE. 171 PA0104 output of "..." requires a "particles_par"-NAMELIST 172 in the parameter file (PARIN) 173 PA0105 output of "..." requires humidity = .TRUE. 174 PA0106 output of "" requires cloud_physics = .TRUE. or 175 cloud_droplets = .TRUE.' 176 PA0107 output of "..." requires cloud_droplets = .TRUE. 177 PA0108 output of "..." requires cloud_physics = .TRUE. 178 PA0109 output of "..." requires ocean = .TRUE. 179 PA0110 output of "..." requires passive_scalar = .TRUE. 180 PA0111 illegal value for data_output: "..." only 181 2d-horizontal cross sections are allowed for this value 182 PA0112 output of "..." requires precipitation = .TRUE. 183 PA0113 temporal averaging of precipitation amount "..." 184 is not possible' 185 PA0114 illegal value for data_output or data_output_user = "..." 186 PA0115 illegal value for data_output = "..." 187 PA0116 z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1)) 188 and <= ... (zu(nzt)) 189 PA0117 do3d_compress = .TRUE. not allowed on host "" 190 PA0118 illegal precision: do3d_comp_prec ( ...) = "..." 191 PA0119 unknown variable "..." given for do3d_comp_prec(...) 192 PA0120 unknown value for data_output_format "..." 193 PA0121 km_constant = ... < 0.0 194 PA0122 prandtl_number = ... < 0.0 195 PA0123 prandtl_layer is not allowed with fixed value of km 196 PA0124 outflow_damping width out of range 197 PA0125 rif_min = ... must be less than rif_max = ... 198 PA0126 disturbance_level_b = ... must be >= ... (zu(3)) 199 PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2)) 200 PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2)) 201 PA0129 disturbance_level_t = ... must 202 be >= disturbance_level_b = ... 203 PA0130 disturbance_level_ind_t =... must 204 be >= disturbance_level_b = ... 205 PA0131 inflow_disturbance_begin out of range 206 PA0132 inflow_disturbance_end out of range 207 PA0133 turbulent_inflow = .T. requires a Dirichlet 208 condition at the inflow boundary 209 PA0134 illegal value for recycling_width: ... 210 PA0135 unknown random generator: random_generator = "..." 211 PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1)) 212 PA0137 mixing_length_1d = "..." is unknown 213 PA0138 dissipation_1d = "..." is unknown 214 PA0139 termination_time_needed = ... must be > 30.0 on host ..." 215 PA0140 termination_time_needed = ... should be >= 300.0 216 on host "..." 217 PA0141 coupling requires PALM to be called with 218 ''mrun -K parallel'' 219 PA0142 absolute temperature < 0.0 at zu(...) = ... 220 PA0143 k=... j=... i=... ql_c=... part(...)%wf=... 221 delta_r=... 222 PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=... 223 d_radius=... delta_r=... particle_radius=... 224 PA0145 collision_efficiency out of range: ... 225 PA0146 maximum_number_of_particles needs to be increased 226 but this is not allowed with NetCDF output switched on 227 PA0147 maximum_number_of_tails needs to be increased 228 but this is not allowed with NetCDF output switched on 229 PA0148 particle too fast. n = ... 230 PA0149 particle out of range: i=... j=... k=... 231 nxl=... nxr=... nys=... nyn=... nzb=... nzt=... 232 PA0150 Both dp_external and conserve_volume_flow are .TRUE. 233 but one of them must be .FALSE. 234 PA0151 dp_level_b = ... is out of range 235 PA0152 dp_external is .TRUE. but dpdxy is zero, i.e. the external 236 pressure gradient will not be applied 237 PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the 238 external pressure gradient will not be applied 239 PA0154 unknown conserve_volume_flow_mode: ... 240 PA0155 noncyclic boundary conditions require 241 conserve_volume_flow_mode = ''inflow_profile'' 242 PA0156 cyclic boundary conditions require conserve_volume_flow_mode = 243 ''initial_profiles'' or ''bulk_velocity'' 244 requires noncyclic boundary conditions 245 PA0157 nonzero bulk velocity requires conserve_volume_flow = .T. and 246 conserve_volume_flow_mode = ''bulk_velocity'' 247 PA0158 no vertical boundary condition for variable "..." 248 PA0159 no term for component "..." 249 PA0160 non-cyclic lateral boundaries along x do not allow 250 calculation of spectra along x 251 PA0161 sorry, calculation of spectra in non parallel mode is 252 still not realized 253 PA0162 non-cyclic lateral boundaries along y do not allow 254 calculation of spectra along y 255 PA0163 run will be terminated because it is running out of 256 job cpu limit remaining time: ... s 257 termination time needed: ... s 258 PA0164 run will be terminated due to user settings of 259 restart_time / dt_restart new restart time is: ... s 260 PA0165 re-open of unit 14 is not verified. Please check results! 261 PA0166 re-opening of file-id ... is not allowed 262 PA0167 opening file-id ... not allowed for PE ... 263 PA0168 opening file-id ... is not allowed since it is used otherwise 264 PA0169 no filename for AVS-data-file found in MRUN-config-file 265 filename in FLD-file set to "unknown" 266 PA0170 no path for batch_scp on host "..." 267 PA0171 NetCDF: no 64-bit offset allowed on this machine 268 PA0172 no OPEN-statement for file-id ... 269 PA0173 wrong component: ... 270 PA0174 wrong argument expected: ... given: ... 271 PA0175 no time measurement defined on this host 272 PA0176 negative time interval occured 273 PE ... L=PAUSE "..." new=... last=... 274 PA0177 negative time interval occured 275 PE ... L=STOP "..." new=... last=... isum=... 276 PA0178 negative time interval occured 277 PE ... L=STOP "..." sum=... mtime=... 278 PA0179 unknown modus of time measurement: ... 279 PA0180 unknown cross-section: ... 280 PA0181 no output provided for: ... 281 PA0182 no output available for: ... 282 PA0183 if humidity/passive_scalar = FALSE output of ... is not provided 283 PA0184 if cloud_physics = FALSE output of ... is not provided 284 PA0185 data_output_profiles: normalizing cross ... 285 is not possible since one of the normalizing factors is zero! 286 cross_normx_factor(...,...) = ... 287 cross_normy_factor(...,...) = ... 288 PA0186 no spectra data available 289 PA0187 fft method "..." currently does not work on NEC 290 PA0188 no system-specific fft-call available 291 PA0189 fft method "..." not available 292 PA0190 flow_statistics is called two times within one timestep 293 PA0191 unknown action(s): ... 294 PA0192 timestep has exceeded the lower limit dt_1d = ... s 295 simulation stopped! 296 PA0193 unknown initializing problem 297 PA0194 number of time series quantities exceeds its maximum 298 of dots_max = ... Please increase dots_max in modules.f90. 299 PA0195 dvrp_username is undefined 300 PA0196 dvrp_output="..." not allowed 301 PA0197 dvrp_file="..." not allowed 302 PA0198 mode_dvrp="..." not allowed 303 PA0199 split of communicator not realized with MPI1 coupling 304 atmosphere-ocean' 305 PA0200 missing dz 306 PA0201 dz=... <= 0.0 307 PA0202 grid anisotropy exceeds threshold given by only local 308 horizontal reduction of near_wall mixing length l_wall 309 starting from height level k = ... . 310 PA0203 inconsistent building parameters: bxl=... bxr=... bys=... 311 byn=... nx=... ny=... 312 PA0204 no street canyon width given 313 PA0205 inconsistent canyon parameters: cxl=... cxr=... 314 cwx=... ch=... nx=... ny=... 315 PA0206 inconsistent canyon parameters:... cys=... cyn=... 316 cwy=... ch=... nx=... ny=... 317 PA0207 inconsistent canyon parameters: street canyon can 318 only be oriented either in x- or in y-direction 319 PA0208 file TOPOGRAPHY_DATA does not exist 320 PA0209 errors in file TOPOGRAPHY_DATA 321 PA0210 nzb_local values are outside the model domain 322 MINVAL( nzb_local ) = ... 323 MAXVAL( nzb_local ) = ... 324 PA0211 nzb_local does not fulfill cyclic boundary condition 325 in x-direction 326 PA0212 nzb_local does not fulfill cyclic boundary condition 327 in y-direction 328 PA0213 max_number_of_particle_groups =... 329 number_of_particle_groups reset to ... 330 PA0214 version mismatch concerning data from prior run 331 version on file = ... 332 version in program = ... 333 PA0215 particle group # ... has a density ratio /= 0 334 but radius = 0 335 PA0216 number of initial particles (...) exceeds 336 maximum_number_of_particles (...) on PE ... 337 PA0217 unknown boundary condition bc_par_b = "..." 338 PA0218 unknown boundary condition bc_par_t = "..." 339 PA0219 unknown boundary condition bc_par_lr = "..." 340 PA0220 unknown boundary condition bc_par_ns = "..." 341 PA0221 number of PEs of the prescribed topology (...) does not match 342 the number of PEs available to the job () 343 PA0222 if the processor topology is prescribed by the user, 344 both values of "npex" and "npey" must be given 345 in the NAMELIST-parameter file 346 PA0223 psolver = "poisfft_hybrid" can only be used in case of 347 a 1d-decomposition along x 348 PA0224 no matching grid for transpositions found 349 PA0225 x-direction: gridpoint number (...)is not an 350 integral divisor of the number of procesors (...) 351 PA0226 x-direction: nx does not match the requirements given 352 by the number of PEs used 353 please use nx = ... instead of nx =... 354 PA0227 y-direction: gridpoint number (...) is not an 355 integral divisor of the number of processors (...) 356 PA0228 y-direction: ny does not match the requirements given 357 by the number of PEs used 358 please use ny = ... instead of ny =... 359 PA0229 1d-decomposition along x chosen but nz restrictions 360 may occur since ups-scheme is activated 361 PA0230 transposition z --> x: 362 nz=... is not an integral divisior of pdims(1)= ... 363 PA0231 transposition x --> y: 364 nx+1=... is not an integral divisor of pdims(2)= ... 365 PA0232 transposition y --> z: 366 ny+1=... is not an integral divisor of pdims(1)=... 367 PA0233 transposition x --> y: 368 ny+1=... is not an integral divisor of pdims(1)=... 369 PA0234 direct transposition z --> y (needed for spectra): 171 PA0104 output of "..." requires a "particles_par"-NAMELIST 172 in the parameter file (PARIN) 173 PA0105 output of "..." requires humidity = .TRUE. 174 PA0106 output of "" requires cloud_physics = .TRUE. or 175 cloud_droplets = .TRUE.' 176 PA0107 output of "..." requires cloud_droplets = .TRUE. 177 PA0108 output of "..." requires cloud_physics = .TRUE. 178 PA0109 output of "..." requires ocean = .TRUE. 179 PA0110 output of "..." requires passive_scalar = .TRUE. 180 PA0111 illegal value for data_output: "..." only 181 2d-horizontal cross sections are allowed for this value 182 PA0112 output of "..." requires precipitation = .TRUE. 183 PA0113 temporal averaging of precipitation amount "..." 184 is not possible' 185 PA0114 illegal value for data_output or data_output_user = "..." 186 PA0115 illegal value for data_output = "..." 187 PA0116 z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1)) 188 and <= ... (zu(nzt)) 189 PA0117 do3d_compress = .TRUE. not allowed on host "" 190 PA0118 illegal precision: do3d_comp_prec ( ...) = "..." 191 PA0119 unknown variable "..." given for do3d_comp_prec(...) 192 PA0120 unknown value for data_output_format "..." 193 PA0121 km_constant = ... < 0.0 194 PA0122 prandtl_number = ... < 0.0 195 PA0123 prandtl_layer is not allowed with fixed value of km 196 PA0124 outflow_damping width out of range 197 PA0125 rif_min = ... must be less than rif_max = ... 198 PA0126 disturbance_level_b = ... must be >= ... (zu(3)) 199 PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2)) 200 PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2)) 201 PA0129 disturbance_level_t = ... must 202 be >= disturbance_level_b = ... 203 PA0130 disturbance_level_ind_t =... must 204 be >= disturbance_level_b = ... 205 PA0131 inflow_disturbance_begin out of range 206 PA0132 inflow_disturbance_end out of range 207 PA0133 turbulent_inflow = .T. requires a Dirichlet 208 condition at the inflow boundary 209 PA0134 illegal value for recycling_width: ... 210 PA0135 unknown random generator: random_generator = "..." 211 PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1)) 212 PA0137 mixing_length_1d = "..." is unknown 213 PA0138 dissipation_1d = "..." is unknown 214 PA0139 termination_time_needed = ... must be > 30.0 on host ..." 215 PA0140 termination_time_needed = ... should be >= 300.0 216 on host "..." 217 PA0141 coupling requires PALM to be called with 218 ''mrun -K parallel'' 219 PA0142 absolute temperature < 0.0 at zu(...) = ... 220 PA0143 k=... j=... i=... ql_c=... part(...)%wf=... 221 delta_r=... 222 PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=... 223 d_radius=... delta_r=... particle_radius=... 224 PA0145 collision_efficiency out of range: ... 225 PA0146 maximum_number_of_particles needs to be increased 226 but this is not allowed with NetCDF output switched on 227 PA0147 maximum_number_of_tails needs to be increased 228 but this is not allowed with NetCDF output switched on 229 PA0148 particle too fast. n = ... 230 PA0149 particle out of range: i=... j=... k=... 231 nxl=... nxr=... nys=... nyn=... nzb=... nzt=... 232 PA0150 Both dp_external and conserve_volume_flow are .TRUE. 233 but one of them must be .FALSE. 234 PA0151 dp_level_b = ... is out of range 235 PA0152 dp_external is .TRUE. but dpdxy is zero, i.e. the external 236 pressure gradient will not be applied 237 PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the 238 external pressure gradient will not be applied 239 PA0154 unknown conserve_volume_flow_mode: ... 240 PA0155 noncyclic boundary conditions require 241 conserve_volume_flow_mode = ''inflow_profile'' 242 PA0156 cyclic boundary conditions require conserve_volume_flow_mode = 243 ''initial_profiles'' or ''bulk_velocity'' 244 requires noncyclic boundary conditions 245 PA0157 nonzero bulk velocity requires conserve_volume_flow = .T. and 246 conserve_volume_flow_mode = ''bulk_velocity'' 247 PA0158 no vertical boundary condition for variable "..." 248 PA0159 no term for component "..." 249 PA0160 non-cyclic lateral boundaries along x do not allow 250 calculation of spectra along x 251 PA0161 sorry, calculation of spectra in non parallel mode is 252 still not realized 253 PA0162 non-cyclic lateral boundaries along y do not allow 254 calculation of spectra along y 255 PA0163 run will be terminated because it is running out of 256 job cpu limit remaining time: ... s 257 termination time needed: ... s 258 PA0164 run will be terminated due to user settings of 259 restart_time / dt_restart new restart time is: ... s 260 PA0165 re-open of unit 14 is not verified. Please check results! 261 PA0166 re-opening of file-id ... is not allowed 262 PA0167 opening file-id ... not allowed for PE ... 263 PA0168 opening file-id ... is not allowed since it is used otherwise 264 PA0169 no filename for AVS-data-file found in MRUN-config-file 265 filename in FLD-file set to "unknown" 266 PA0170 no path for batch_scp on host "..." 267 PA0171 NetCDF: no 64-bit offset allowed on this machine 268 PA0172 no OPEN-statement for file-id ... 269 PA0173 wrong component: ... 270 PA0174 wrong argument expected: ... given: ... 271 PA0175 no time measurement defined on this host 272 PA0176 negative time interval occured 273 PE ... L=PAUSE "..." new=... last=... 274 PA0177 negative time interval occured 275 PE ... L=STOP "..." new=... last=... isum=... 276 PA0178 negative time interval occured 277 PE ... L=STOP "..." sum=... mtime=... 278 PA0179 unknown modus of time measurement: ... 279 PA0180 unknown cross-section: ... 280 PA0181 no output provided for: ... 281 PA0182 no output available for: ... 282 PA0183 if humidity/passive_scalar = FALSE output of ... 283 is not provided 284 PA0184 if cloud_physics = FALSE output of ... is not provided 285 PA0185 data_output_profiles: normalizing cross ... 286 is not possible since one of the normalizing factors is zero! 287 cross_normx_factor(...,...) = ... 288 cross_normy_factor(...,...) = ... 289 PA0186 no spectra data available 290 PA0187 fft method "..." currently does not work on NEC 291 PA0188 no system-specific fft-call available 292 PA0189 fft method "..." not available 293 PA0190 flow_statistics is called two times within one timestep 294 PA0191 unknown action(s): ... 295 PA0192 timestep has exceeded the lower limit dt_1d = ... s 296 simulation stopped! 297 PA0193 unknown initializing problem 298 PA0194 number of time series quantities exceeds its maximum 299 of dots_max = ... Please increase dots_max in modules.f90. 300 PA0195 dvrp_username is undefined 301 PA0196 dvrp_output="..." not allowed 302 PA0197 dvrp_file="..." not allowed 303 PA0198 mode_dvrp="..." not allowed 304 PA0199 split of communicator not realized with MPI1 coupling 305 atmosphere-ocean' 306 PA0200 missing dz 307 PA0201 dz=... <= 0.0 308 PA0202 grid anisotropy exceeds threshold given by only local 309 horizontal reduction of near_wall mixing length l_wall 310 starting from height level k = ... . 311 PA0203 inconsistent building parameters: bxl=... bxr=... bys=... 312 byn=... nx=... ny=... 313 PA0204 no street canyon width given 314 PA0205 inconsistent canyon parameters: cxl=... cxr=... 315 cwx=... ch=... nx=... ny=... 316 PA0206 inconsistent canyon parameters:... cys=... cyn=... 317 cwy=... ch=... nx=... ny=... 318 PA0207 inconsistent canyon parameters: street canyon can 319 only be oriented either in x- or in y-direction 320 PA0208 file TOPOGRAPHY_DATA does not exist 321 PA0209 errors in file TOPOGRAPHY_DATA 322 PA0210 nzb_local values are outside the model domain 323 MINVAL( nzb_local ) = ... 324 MAXVAL( nzb_local ) = ... 325 PA0211 nzb_local does not fulfill cyclic boundary condition 326 in x-direction 327 PA0212 nzb_local does not fulfill cyclic boundary condition 328 in y-direction 329 PA0213 max_number_of_particle_groups =... 330 number_of_particle_groups reset to ... 331 PA0214 version mismatch concerning data from prior run 332 version on file = ... 333 version in program = ... 334 PA0215 particle group # ... has a density ratio /= 0 335 but radius = 0 336 PA0216 number of initial particles (...) exceeds 337 maximum_number_of_particles (...) on PE ... 338 PA0217 unknown boundary condition bc_par_b = "..." 339 PA0218 unknown boundary condition bc_par_t = "..." 340 PA0219 unknown boundary condition bc_par_lr = "..." 341 PA0220 unknown boundary condition bc_par_ns = "..." 342 PA0221 number of PEs of the prescribed topology (...) does not match 343 the number of PEs available to the job () 344 PA0222 if the processor topology is prescribed by the user, 345 both values of "npex" and "npey" must be given 346 in the NAMELIST-parameter file 347 PA0223 psolver = "poisfft_hybrid" can only be used in case of 348 a 1d-decomposition along x 349 PA0224 no matching grid for transpositions found 350 PA0225 x-direction: gridpoint number (...)is not an 351 integral divisor of the number of procesors (...) 352 PA0226 x-direction: nx does not match the requirements given 353 by the number of PEs used 354 please use nx = ... instead of nx =... 355 PA0227 y-direction: gridpoint number (...) is not an 356 integral divisor of the number of processors (...) 357 PA0228 y-direction: ny does not match the requirements given 358 by the number of PEs used 359 please use ny = ... instead of ny =... 360 PA0229 1d-decomposition along x chosen but nz restrictions 361 may occur since ups-scheme is activated 362 PA0230 transposition z --> x: 363 nz=... is not an integral divisior of pdims(1)= ... 364 PA0231 transposition x --> y: 365 nx+1=... is not an integral divisor of pdims(2)= ... 366 PA0232 transposition y --> z: 367 ny+1=... is not an integral divisor of pdims(1)=... 368 PA0233 transposition x --> y: 369 ny+1=... is not an integral divisor of pdims(1)=... 370 PA0234 direct transposition z --> y (needed for spectra): 370 371 nz=... is not an integral divisor of pdims(2)=... 371 PA0235 mg_switch_to_pe0_level out of range and reset to default (=0) 372 PA0236 not enough memory for storing gathered multigrid data on PE0 373 PA0237 multigrid gather/scatter impossible in non parallel mode 374 PA0238 more than 10 multigrid levels 375 PA0239 The value for "topography_grid_convention" is not set. 376 Its default value is only valid for 377 "topography" = ''single_building'', 378 ''single_street_canyon'' or ''read_from_file'' 379 Choose ''cell_edge'' or ''cell_center''. 380 PA0240 The value for "topography_grid_convention" is not 381 recognized. Choose ''cell_edge'' or ''cell_center''. 382 PA0241 netcdf_precision must contain a "_" 383 netcdf_precision(...)="..." 384 PA0242 illegal netcdf precision: netcdf_precision( ...)="..." 385 PA0243 unknown variable in inipar assignment: 386 netcdf_precision(', i, ')="..." 387 PA0244 no grid defined for variable ... 388 PA0245 NetCDF file for volume data ... from previuos run found, 389 but this file cannot be extended due to variable mismatch. 390 New file is created instead. 391 PA0246 NetCDF file for volume data ... from previuos run found, 392 but this file cannot be extended due to mismatch in 393 number of vertical grid points (nz_do3d). 394 New file is created instead. 395 PA0247 NetCDF file for volume data ... from previuos run found, 396 but this file cannot be extended because the current 397 output time is less or equal than the last output time 398 on this file. New file is created instead. 399 PA0248 NetCDF file for volume data ... from previous run found. 400 This file will be extended. 401 PA0249 NetCDF file for cross-sections ... from previuos run found, 402 but this file cannot be extended due to variable mismatch. 403 New file is created instead. 404 PA0250 NetCDF file for cross-sections ... from previuos run found, 405 but this file cannot be extended due to mismatch in 406 number of cross sections. New file is created instead. 407 PA0251 NetCDF file for cross-sections ... from previuos run found 408 but this file cannot be extended due to mismatch in cross 409 section levels. New file is created instead. 410 PA0252 NetCDF file for cross sections ... from previuos run found, 411 but this file cannot be extended because the current output time 412 is less or equal than the last output time on this file. 413 New file is created instead. 414 PA0253 NetCDF file for cross-sections ... from previous run found. 415 This file will be extended. 416 PA0254 NetCDF file for vertical profiles from previuos run found, 417 but this file cannot be extended due to variable mismatch. 418 New file is created instead. 419 PA0255 NetCDF file for vertical profiles from previuos run found, 420 but this file cannot be extended because the current 421 output time is less or equal than the last output time 422 on this file. New file is created instead. 423 PA0256 NetCDF file for vertical profiles from previous run found. 424 This file will be extended. 425 PA0257 NetCDF file for time series from previuos run found 426 but this file cannot be extended due tovariable mismatch. 427 New file is created instead. 428 PA0258 NetCDF file for time series from previuos run found, 429 but this file cannot be extended because the current 430 output time is less or equal than the last output time 431 on this file. New file is created instead. 432 PA0259 NetCDF file for time series from previous run found. 433 This file will be extended. 434 PA0260 NetCDF file for spectra from previuos run found, 435 but this file cannot be extended due to variable mismatch. 436 New file is created instead. 437 PA0261 NetCDF file for spectra from previuos run found, 438 but this file cannot be extended due to mismatch in 439 number of vertical levels. New file is created instead. 440 PA0262 NetCDF file for spectra from previuos run found, 441 but this file cannot be extended due to mismatch in 442 heights of vertical levels. New file is created instead. 443 PA0263 NetCDF file for spectra from previuos run found, 444 but this file cannot be extended because the current 445 output time is less or equal than the last output time 446 on this file. New file is created instead. 447 PA0264 NetCDF file for spectra from previous run found. 448 This file will be extended. 449 PA0265 NetCDF file for particles from previuos run found, 450 but this file cannot be extended because the current 451 output time is less or equal than the last output time 452 on this file. New file is created instead. 453 PA0266 NetCDF file for particles from previous run found. 454 This file will be extended. 455 PA0267 NetCDF file for particle time series from previuos run found, 456 but this file cannot be extended due to variable mismatch. 457 New file is created instead. 458 PA0268 NetCDF file for particle time series from previuos run found, 459 but this file cannot be extended because the current 460 output time is less or equal than the last output time 461 on this file. New file is created instead. 462 PA0269 NetCDF file for particle time series from previous run found. 463 This file will be extended. 464 PA0270 mode "..." not supported 465 PA0271 errors in \$inipar &or no \$inipar-namelist found (CRAY-machines only) 466 PA0272 no \$inipar-namelist found 467 PA0273 no value or wrong value given for nx: nx=... 468 PA0274 no value or wrong value given for ny: ny=... 469 PA0275 no value or wrong value given for nz: nz=... 470 PA0276 local file ENVPAR not found 372 PA0235 mg_switch_to_pe0_level out of range and reset to 373 default (=0) 374 PA0236 not enough memory for storing gathered multigrid data on PE0 375 PA0237 multigrid gather/scatter impossible in non parallel mode 376 PA0238 more than 10 multigrid levels 377 PA0239 The value for "topography_grid_convention" is not set. 378 Its default value is only valid for 379 "topography" = ''single_building'', 380 ''single_street_canyon'' or ''read_from_file'' 381 Choose ''cell_edge'' or ''cell_center''. 382 PA0240 The value for "topography_grid_convention" is not 383 recognized. Choose ''cell_edge'' or ''cell_center''. 384 PA0241 netcdf_precision must contain a "_" 385 netcdf_precision(...)="..." 386 PA0242 illegal netcdf precision: netcdf_precision( ...)="..." 387 PA0243 unknown variable in inipar assignment: 388 netcdf_precision(', i, ')="..." 389 PA0244 no grid defined for variable ... 390 PA0245 NetCDF file for volume data ... from previuos run found, 391 but this file cannot be extended due to variable mismatch. 392 New file is created instead. 393 PA0246 NetCDF file for volume data ... from previuos run found, 394 but this file cannot be extended due to mismatch in 395 number of vertical grid points (nz_do3d). 396 New file is created instead. 397 PA0247 NetCDF file for volume data ... from previuos run found, 398 but this file cannot be extended because the current 399 output time is less or equal than the last output time 400 on this file. New file is created instead. 401 PA0248 NetCDF file for volume data ... from previous run found. 402 This file will be extended. 403 PA0249 NetCDF file for cross-sections ... from previuos run found, 404 but this file cannot be extended due to variable mismatch. 405 New file is created instead. 406 PA0250 NetCDF file for cross-sections ... from previuos run found, 407 but this file cannot be extended due to mismatch in 408 number of cross sections. New file is created instead. 409 PA0251 NetCDF file for cross-sections ... from previuos run found 410 but this file cannot be extended due to mismatch in cross 411 section levels. New file is created instead. 412 PA0252 NetCDF file for cross sections ... from previuos run found, 413 but this file cannot be extended because the current 414 output time is less or equal than the last output time 415 on this file. 416 New file is created instead. 417 PA0253 NetCDF file for cross-sections ... from previous run found. 418 This file will be extended. 419 PA0254 NetCDF file for vertical profiles from previuos run found, 420 but this file cannot be extended due to variable mismatch. 421 New file is created instead. 422 PA0255 NetCDF file for vertical profiles from previuos run found, 423 but this file cannot be extended because the current 424 output time is less or equal than the last output time 425 on this file. New file is created instead. 426 PA0256 NetCDF file for vertical profiles from previous run found. 427 This file will be extended. 428 PA0257 NetCDF file for time series from previuos run found 429 but this file cannot be extended due tovariable mismatch. 430 New file is created instead. 431 PA0258 NetCDF file for time series from previuos run found, 432 but this file cannot be extended because the current 433 output time is less or equal than the last output time 434 on this file. New file is created instead. 435 PA0259 NetCDF file for time series from previous run found. 436 This file will be extended. 437 PA0260 NetCDF file for spectra from previuos run found, 438 but this file cannot be extended due to variable mismatch. 439 New file is created instead. 440 PA0261 NetCDF file for spectra from previuos run found, 441 but this file cannot be extended due to mismatch in 442 number of vertical levels. New file is created instead. 443 PA0262 NetCDF file for spectra from previuos run found, 444 but this file cannot be extended due to mismatch in 445 heights of vertical levels. New file is created instead. 446 PA0263 NetCDF file for spectra from previuos run found, 447 but this file cannot be extended because the current 448 output time is less or equal than the last output time 449 on this file. New file is created instead. 450 PA0264 NetCDF file for spectra from previous run found. 451 This file will be extended. 452 PA0265 NetCDF file for particles from previuos run found, 453 but this file cannot be extended because the current 454 output time is less or equal than the last output time 455 on this file. New file is created instead. 456 PA0266 NetCDF file for particles from previous run found. 457 This file will be extended. 458 PA0267 NetCDF file for particle time series from previuos run found, 459 but this file cannot be extended due to variable mismatch. 460 New file is created instead. 461 PA0268 NetCDF file for particle time series from previuos run found, 462 but this file cannot be extended because the current 463 output time is less or equal than the last output time 464 on this file. New file is created instead. 465 PA0269 NetCDF file for particle time series from previous run found. 466 This file will be extended. 467 PA0270 mode "..." not supported 468 PA0271 errors in \$inipar &or no \$inipar-namelist found 469 (CRAY-machines only) 470 PA0272 no \$inipar-namelist found 471 PA0273 no value or wrong value given for nx: nx=... 472 PA0274 no value or wrong value given for ny: ny=... 473 PA0275 no value or wrong value given for nz: nz=... 474 PA0276 local file ENVPAR not found 475 some variables for steering may not be properly set 476 PA0277 errors in local file ENVPAR 477 some variables for steering may not be properly set 478 PA0278 no envpar-NAMELIST found in local file ENVPAR 471 479 some variables for steering may not be properly set 472 PA0277 errors in local file ENVPAR 473 some variables for steering may not be properly set 474 PA0278 no envpar-NAMELIST found in local file ENVPAR 475 some variables for steering may not be properly set 476 PA0279 wrong component: ... 477 PA0280 Number of OpenMP threads = ... 478 PA0281 running optimized multinode version 479 switch_per_lpar = ... 480 tasks_per_lpar = ... 481 tasks_per_logical_node = ... 482 PA0282 parallel environment (MPI) required 483 PA0283 no sufficient convergence within 1000 cycles 484 PA0284 data from subdomain of previous run mapped more 485 than 1000 times 486 PA0285 number of PEs or virtual PE-grid changed in restart run 487 PE ... will read from files ... 488 PA0286 version mismatch concerning data from prior run 489 version on file = "..." 490 version in program = "..." 491 PA0287 problem with index bound nxl on restart file "..." 492 nxl = ... but it should be = ... from the index bound 493 information array 494 PA0288 problem with index bound nxr on restart file "..." 495 nxr = ... but it should be = ... from the index bound 496 information array 497 PA0289 problem with index bound nys on restart file "..." 498 nys = .. but it should be = ... from the index bound 499 information array 500 PA0290 problem with index bound nyn on restart file "..." 501 nyn = ... but it should be = ... from the index bound 502 information array 503 PA0291 mismatch between actual data and data 504 from prior run on PE ... 505 nzb on file = ... 506 nzb = ... 507 PA0292 mismatch between actual data and data 508 from prior run on PE ... 509 nzt on file = ... 510 nzt = ... 511 PA0293 read_3d_binary: spectrum_x 512 on restart file ignored because total numbers of 513 grid points (nx) do not match 514 PA0294 read_3d_binary: spectrum_y 515 on restart file ignored because total numbers of 516 grid points (ny) do not match 517 PA0295 unknown field named "..." found in data from 518 prior run on PE ... 519 PA0296 version mismatch concerning control variables 520 version on file = "..." 521 version on program = "..." 522 PA0297 numprocs not found in data from prior run on PE ... 523 PA0298 hor_index_bounds not found in data from prior 524 run on PE ... 525 PA0299 nz not found in data from prior run on PE ... 526 PA0300 max_pr_user not found in data from prior run on PE ... 527 PA0301 statistic_regions not found in data from prior 528 run on PE ... 529 PA0302 unknown variable named "..." found in data from 530 prior run on PE ... 531 PA0303 nz not found in restart data file 532 PA0304 mismatch concerning number of gridpoints along z 533 nz on file = "..." 534 nz from run = "..." 535 PA0305 max_pr_user not found in restart data file 536 PA0306 number of user profiles on restart data file differs 537 from the current run 538 max_pr_user on file = "..." 539 max_pr_user from run = "..." 540 PA0307 statistic_regions not found in restart data file 541 PA0308 statistic regions on restart data file differ 542 from the current run 543 statistic regions on file = "..." 544 statistic regions from run = "..." 480 PA0279 wrong component: ... 481 PA0280 Number of OpenMP threads = ... 482 PA0281 running optimized multinode version 483 switch_per_lpar = ... 484 tasks_per_lpar = ... 485 tasks_per_logical_node = ... 486 PA0282 parallel environment (MPI) required 487 PA0283 no sufficient convergence within 1000 cycles 488 PA0284 data from subdomain of previous run mapped more 489 than 1000 times 490 PA0285 number of PEs or virtual PE-grid changed in restart run 491 PE ... will read from files ... 492 PA0286 version mismatch concerning data from prior run 493 version on file = "..." 494 version in program = "..." 495 PA0287 problem with index bound nxl on restart file "..." 496 nxl = ... but it should be = ... from the index bound 497 information array 498 PA0288 problem with index bound nxr on restart file "..." 499 nxr = ... but it should be = ... from the index bound 500 information array 501 PA0289 problem with index bound nys on restart file "..." 502 nys = .. but it should be = ... from the index bound 503 information array 504 PA0290 problem with index bound nyn on restart file "..." 505 nyn = ... but it should be = ... from the index bound 506 information array 507 PA0291 mismatch between actual data and data 508 from prior run on PE ... 509 nzb on file = ... 510 nzb = ... 511 PA0292 mismatch between actual data and data 512 from prior run on PE ... 513 nzt on file = ... 514 nzt = ... 515 PA0293 read_3d_binary: spectrum_x 516 on restart file ignored because total numbers of 517 grid points (nx) do not match 518 PA0294 read_3d_binary: spectrum_y 519 on restart file ignored because total numbers of 520 grid points (ny) do not match 521 PA0295 unknown field named "..." found in data from 522 prior run on PE ... 523 PA0296 version mismatch concerning control variables 524 version on file = "..." 525 version on program = "..." 526 PA0297 numprocs not found in data from prior run on PE ... 527 PA0298 hor_index_bounds not found in data from prior 528 run on PE ... 529 PA0299 nz not found in data from prior run on PE ... 530 PA0300 max_pr_user not found in data from prior run on PE ... 531 PA0301 statistic_regions not found in data from prior 532 run on PE ... 533 PA0302 unknown variable named "..." found in data from 534 prior run on PE ... 535 PA0303 nz not found in restart data file 536 PA0304 mismatch concerning number of gridpoints along z 537 nz on file = "..." 538 nz from run = "..." 539 PA0305 max_pr_user not found in restart data file 540 PA0306 number of user profiles on restart data file differs 541 from the current run 542 max_pr_user on file = "..." 543 max_pr_user from run = "..." 544 PA0307 statistic_regions not found in restart data file 545 PA0308 statistic regions on restart data file differ 546 from the current run 547 statistic regions on file = "..." 548 statistic regions from run = "..." 545 549 statistic data may be lost! 546 PA0309 inflow profiles not temporally averaged. 547 Averaging will be done now using ... samples. 550 PA0309 inflow profiles not temporally averaged. 551 Averaging will be done now using ... samples. 552 PA0310 remote model "..." terminated with 553 terminate_coupled_remote = ... 554 local model "..." has terminate_coupled = ... 555 PA0311 number of gridpoints along x or/and y contain illegal 556 factors only factors 8,6,5,4,3,2 are allowed 557 PA0312 Time step has reached minimum limit.', & 558 dt = ... s Simulation is terminated. 559 old_dt = ... s 560 dt_u = ... s 561 dt_v = ... s 562 dt_w = ... s 563 dt_diff = ... s 564 u_max = ... m/s k=... j=... i=... 565 v_max = ... m/s k=... j=... i=... 566 w_max = ... m/s k=... j=... i=... 548 567 568 569 UI0001 unknown location "..." 570 UI0002 location "..." is not allowed to be called with 571 parameters "i" and "j" 572 UI0003 no output possible for: ... 573 UI0004 unknown mode "..." 574 UI0005 topography "..." not available yet 575 UI0006 unknown topography "..." 576 UI0007 canopy_mode "..." not available yet 577 UI0008 unknown canopy_mode "..." 578 UI0009 the number of user-defined profiles given in 579 data_output_pr (...) does not match the one 580 found in the restart file (...) 581 UI0010 Spectra of ... can not be calculated 582 UI0011 Spectra of ... are not defined 583 UI0012 unknown variable named "..." found in data from prior 584 run on PE 585
Note: See TracChangeset
for help on using the changeset viewer.
