Changeset 227 for palm/trunk/SOURCE

Timestamp:

Feb 2, 2009 7:49:23 AM (16 years ago)

Author:

raasch

Message:

New:
---
Restart runs on SGI-ICE are working (mrun).
2d-decomposition is default on SGI-ICE systems. (init_pegrid)

Ocean-atmosphere coupling realized with MPI-1. mrun adjusted for this case
(-Y option). Adjustments in mrun, mbuild, and subjob for lcxt4.

DVRP arguments changed to single precision, mode pathlines added.

User can add additional routines in files user_additional_routines

User can check user parameters and deduce further quantities in user_check_parameters

Check that PALM is called with mrun -K parallel for coupling

check_for_restart, check_parameters, data_output_dvrp, init_dvrp, init_pegrid, local_stop, modules, package_parin, palm, surface_coupler, timestep, user_additional_routines
Makefile, mrun, mbuild, subjob

New: init_coupling, user_check_parameters

Changed:

---

User interface has been split into single files.

Type of count and count_rate changed to INTEGER(8) in order to avoid out of
range problems, which result in measured negative time intervals. (cpu_log,
local_tremain, local_tremain_ini)

Reading mechanism from restart files completely revised. The subdomain/total
domain size can vary arbitrarily between current and previous run.
(read_var_list, read_3d_binary, user_read_restart_data)

Precompilation mechanism (mbuild) completely revised: the source tarfile remains in
the source directory. One depository per block (given in the config-file) is
created. Always all files from the source directory are copied to the respective
depository. No additional file checks are done any more (version 2.1). The
depository name used contains the conditions given by mrun-option "-K".
(mbuild, mrun)

Output messages (including required stop of execution) can now be handled with
the new subroutine handle_palm_message. All output messages will be replaced
by this routine step by step within the next revisions.

Neumann boundary condition at k=nzb is explicitly set for better reading,
although this has been already done in boundary_conds. (advec_s_bc)

Origin of the xy-coordinate system shifted from the center of the first
grid cell (indices i=0, j=0) to the south-left corner of this cell. (netcdf)

Topography definition according to new user parameter topography_grid_convention
(init_grid, modules, user_header, user_init_grid, user_parin)

Makefile, mbuild, mrun, advec_s_bc, check_parameters, cpu_log, local_stop, local_tremain, local_tremain_ini, modules, netcdf, read_var_list, read_3d_binary, user_read_restart_data

New: handle_palm_message, user_3d_data_averaging user_actions user_advec_particles user_check_data_output user_check_data_output_pr user_data_output_2d user_data_output_3d user_data_output_dvrp user_define_netcdf_grid user_dvrp_coltab user_header user_init user_init_3d_model user_init_grid user_init_particles user_init_plant_canopy user_last_actions user_module user_parin user_particle_attributes user_read_restart_data user_spectra user_statistics

Removed: user_interface

Errors:

---

Bugfix: array d is reallocated in case that multigrid is used (calc_spectra)

Bugfixes for nonparallel execution (check_for_restart, cpu_statistics, inflow_turbulence, init_coupling, timestep)

Size of pf3d adjusted to the required output size (1 gridpoint less, along
all three dimensions), because output of a subset of the data
(pf3d(nxa:nxe...) in the NF90_PUT_VAR statement caused segmentation fault
with the INTEL compiler. (combine_plot_fields)

Bugfix: error in zu index in case of section_xy = -1 (header)

Inconsistency removed: as the thermal stratification is not taken into account for the evaluation of the wall
fluxes at vertical walls, the eddy viscosity km must not be used for the evaluation of the velocity gradients dudy,
dwdy, dvdx and dwdx. (production_e)

Bugfix in calculating k index in case of oceans runs. (sort_particles)

Bugfix: zero output of particle concentration and radius unless particles
have been started (data_output_2d)

Bugfix: reading of spectrum_x|y from restart files ignored if total numbers
of grid points do not match (read_3d_binary)

Bugfix: abort in case that absolute temperature is below zero (init_cloud_physics)

advec_particles, calc_spectra, check_for_restart, combine_plot_fields, cpu_statistics, data_output_2d, header, inflow_turbulence, init_cloud_physics, init_coupling, production_e, read_3d_binary, timestep

File:

• palm/trunk/SOURCE/CURRENT_MODIFICATIONS (modified) (2 diffs)

palm/trunk/SOURCE/CURRENT_MODIFICATIONS

@@ -1 +1 @@
 New:
 ---
-Restart runs on SGI-ICE are working (mrun).
-2d-decomposition is default on SGI-ICE systems. (init_pegrid)
-
-Ocean-atmosphere coupling realized with MPI-1. mrun adjusted for this case
-(-Y option). Adjustments in mrun, mbuild, and subjob for lcxt4.
-
-DVRP arguments changed to single precision, mode pathlines added.
-
-User can add additional routines in files user_additional_routines
-
-User can check user parameters and deduce further quantities in user_check_parameters
-
-Check that PALM is called with mrun -K parallel for coupling
-
-check_for_restart, check_parameters, data_output_dvrp, init_dvrp, init_pegrid, local_stop, modules, package_parin, palm, surface_coupler, timestep, user_additional_routines
-Makefile, mrun, mbuild, subjob
-
-New: init_coupling, user_check_parameters
 
 
 Changed:
 -------
-User interface has been split into single files.
-
-Type of count and count_rate changed to INTEGER(8) in order to avoid out of
-range problems, which result in measured negative time intervals. (cpu_log,
-local_tremain, local_tremain_ini)
-
-Reading mechanism from restart files completely revised. The subdomain/total
-domain size can vary arbitrarily between current and previous run.
-(read_var_list, read_3d_binary, user_read_restart_data)
-
-Precompilation mechanism (mbuild) completely revised: the source tarfile remains in
-the source directory. One depository per block (given in the config-file) is
-created. Always all files from the source directory are copied to the respective
-depository. No additional file checks are done any more (version 2.1). The
-depository name used contains the conditions given by mrun-option "-K".
-(mbuild, mrun)
-
-Output messages (including required stop of execution) can now be handled with
-the new subroutine handle_palm_message. All output messages will be replaced
-by this routine step by step within the next revisions.
-
-Neumann boundary condition at k=nzb is explicitly set for better reading,
-although this has been already done in boundary_conds. (advec_s_bc)
-
-Origin of the xy-coordinate system shifted from the center of the first
-grid cell (indices i=0, j=0) to the south-left corner of this cell. (netcdf)
-
-Topography definition according to new user parameter topography_grid_convention
-(init_grid, modules, user_header, user_init_grid, user_parin)
-
-Makefile, mbuild, mrun, advec_s_bc, check_parameters, cpu_log, local_stop, local_tremain, local_tremain_ini, modules, netcdf, read_var_list, read_3d_binary, user_read_restart_data
-
-New: handle_palm_message, user_3d_data_averaging user_actions user_advec_particles user_check_data_output user_check_data_output_pr user_data_output_2d user_data_output_3d user_data_output_dvrp user_define_netcdf_grid user_dvrp_coltab user_header user_init user_init_3d_model user_init_grid user_init_particles user_init_plant_canopy user_last_actions user_module user_parin user_particle_attributes user_read_restart_data user_spectra user_statistics
-
-Removed: user_interface
 
 
@@ -63 +10 @@
 ------
 
-Bugfix: array d is reallocated in case that multigrid is used (calc_spectra)
-
-Bugfixes for nonparallel execution (check_for_restart, cpu_statistics, inflow_turbulence, init_coupling, timestep)
-
-Size of pf3d adjusted to the required output size (1 gridpoint less, along
-all three dimensions), because output of a subset of the data
-(pf3d(nxa:nxe...) in the NF90_PUT_VAR statement caused segmentation fault
-with the INTEL compiler. (combine_plot_fields)
-
-Bugfix: error in zu index in case of section_xy = -1 (header)
-
-Inconsistency removed: as the thermal stratification is not taken into account for the evaluation of the wall 
-fluxes at vertical walls, the eddy viscosity km must not be used for the evaluation of the velocity gradients dudy, 
-dwdy, dvdx and dwdx. (production_e)
-
-Bugfix in calculating k index in case of oceans runs. (sort_particles)
-
-Bugfix: zero output of particle concentration and radius unless particles
-have been started (data_output_2d)
-
-Bugfix: reading of spectrum_x|y from restart files ignored if total numbers
-of grid points do not match (read_3d_binary)
-
-Bugfix: abort in case that absolute temperature is below zero (init_cloud_physics)
-
-advec_particles, calc_spectra, check_for_restart, combine_plot_fields, cpu_statistics, data_output_2d, header, inflow_turbulence, init_cloud_physics, init_coupling, production_e, read_3d_binary, timestep