Home

Context Navigation

source: palm/trunk/UTIL/combine_plot_fields.f90 @ 394

Last change on this file since 394 was 226, checked in by raasch, 16 years ago
preparations for the next release
Property svn:keywords set to `Id`
File size: 26.6 KB

Line
1	PROGRAM combine_plot_fields
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: combine_plot_fields.f90 226 2009-02-02 07:39:34Z heinze $
11	!
12	! 210 2008-11-06 08:54:02Z raasch
13	! Size of pf3d adjusted to the required output size (1 gridpoint less, along
14	! all three dimensions), because output of a subset of the data
15	! (pf3d(nxa:nxe...) in the NF90_PUT_VAR statement caused segmentation fault
16	! with the INTEL compiler.
17	! Subdomain data are read into temporary arrays pf_tmp/pf3d_tmp in order to
18	! avoid INTEL compiler warnings about (automatic) creation of temporary arrays
19	! Bugfix: three misplaced #endif directives
20	!
21	! 114 2007-10-10 00:03:15Z raasch
22	! Bugfix: model_string needed a default value
23	!
24	! Aug 07 Loop for processing of output by coupled runs, id_string does not
25	! contain modus any longer
26	!
27	! 18/01/06 Output of time-averaged data
28	!
29	! 25/05/05 Errors removed
30	!
31	! 26/04/05 Output in NetCDF format, iso2d and avs output only if parameter
32	! file exists
33	!
34	! 31/10/01 All comments and messages translated into English
35	!
36	! 23/02/99 Keine Bearbeitung komprimierter 3D-Daten
37	! Ursprungsversion vom 28/07/97
38	!
39	!
40	! Description:
41	! ------------
42	! This routine combines data of the PALM-subdomains into one file. In PALM
43	! every processor element opens its own file and writes 2D- or 3D-binary-data
44	! into it (different files are opened for xy-, xz-, yz-cross-sections and
45	! 3D-data). For plotting or analyzing these PE-data have to be collected and
46	! to be put into single files, which is done by this routine.
47	! Output format is NetCDF. Additionally, a data are output in a binary format
48	! readable by ISO2D-software (cross-sections) and by AVS (3D-data).
49	!
50	! This routine must be compiled with:
51	! decalpha:
52	! f95 -cpp -D__netcdf -fast -r8 -I/usr/local/netcdf-3.5.1/include
53	! -L/usr/local/netcdf-3.5.1/lib -lnetcdf
54	! IBM-Regatta:
55	! xlf95 -qsuffix=cpp=f90 -WF,-D__netcdf -qrealsize=8 -q64 -qmaxmem=-1 -Q
56	! -I /aws/dataformats/netcdf-3.6.0-p1/64-32/include-64
57	! -L/aws/dataformats/netcdf-3.6.0-p1/64-32/lib -lnetcdf -O3
58	! IBM-Regatta KISTI:
59	! xlf95 -qsuffix=cpp=f90 -WF,-D__netcdf -qrealsize=8 -q64 -qmaxmem=-1 -Q
60	! -I /applic/netcdf64/src/f90
61	! -L/applic/lib/NETCDF64 -lnetcdf -O3
62	! IBM-Regatta Yonsei (gfdl5):
63	! xlf95 -qsuffix=cpp=f90 -WF,-D__netcdf -qrealsize=8 -q64 -qmaxmem=-1 -Q
64	! -I /usr1/users/raasch/pub/netcdf-3.6.0-p1/include
65	! -L/usr1/users/raasch/pub/netcdf-3.6.0-p1/lib -lnetcdf -O3
66	! IMUK:
67	! ifort combine...f90 -o combine...x
68	! -cpp -D__netcdf -I /muksoft/packages/netcdf/linux/include -axW -r8 -nbs
69	! -Vaxlib -L /muksoft/packages/netcdf/linux/lib -lnetcdf
70	! NEC-SX6:
71	! sxf90 combine...f90 -o combine...x
72	! -I /pool/SX-6/netcdf/netcdf-3.6.0-p1/include -C hopt -Wf '-A idbl4'
73	! -D__netcdf -L/pool/SX-6/netcdf/netcdf-3.6.0-p1/lib -lnetcdf
74	! Sun Fire X4600
75	! pgf95 combine...f90 -o combine...x
76	! -Mpreprocess -D__netcdf -I /home/usr5/mkanda/netcdf-3.6.1/src/f90 -r8
77	! -fast -L/home/usr5/mkanda/netcdf-3.6.1/src/libsrc -lnetcdf
78	! FIMM:
79	! ifort combine...f90 -o combine...x
80	! -axW -cpp -openmp -r8 -nbs -convert little_endian -D__netcdf
81	! -I /local/netcdf/include -Vaxlib -L/local/netcdf/lib -lnetcdf
82	!------------------------------------------------------------------------------!
83
84	#if defined( __netcdf )
85	USE netcdf
86	#endif
87
88	IMPLICIT NONE
89
90	!
91	!-- Local variables
92	CHARACTER (LEN=2) :: modus, model_string
93	CHARACTER (LEN=4) :: id_string
94	CHARACTER (LEN=10) :: dimname, var_name
95	CHARACTER (LEN=40) :: filename
96
97	CHARACTER (LEN=2000), DIMENSION(0:1) :: var_list
98
99	INTEGER, PARAMETER :: spk = SELECTED_REAL_KIND( 6 )
100
101	INTEGER :: av, danz, i, id, &
102	j, k, model, models, nc_stat, nxa, nxag, nxe, nxeg, nya, &
103	nyag, nye, nyeg, nza, nzag, nze, nzeg, pos, time_step, xa, xe, &
104	xxa, xxe, ya, ye, yya, yye, za, ze, zza, zze
105
106	INTEGER, DIMENSION(0:1) :: current_level, current_var, fanz, id_set, &
107	id_var_time, num_var
108
109	INTEGER, DIMENSION(4) :: id_dims_loc
110
111	INTEGER, DIMENSION(0:1,4) :: id_dims
112
113	INTEGER, DIMENSION(0:1,1000) :: id_var, levels
114
115	LOGICAL :: avs_output, compressed, found, iso2d_output, netcdf_output, &
116	netcdf_0, netcdf_1
117
118	REAL :: dx, simulated_time
119	REAL, DIMENSION(:), ALLOCATABLE :: eta, ho, hu
120	REAL, DIMENSION(:,:), ALLOCATABLE :: pf, pf_tmp
121	REAL(spk), DIMENSION(:,:,:), ALLOCATABLE :: pf3d, pf3d_tmp
122
123	PRINT*, ''
124	PRINT*, ''
125	PRINT, ' combine_plot_fields *'
126
127	!
128	!-- Find out if a coupled run has been carried out
129	INQUIRE( FILE='COUPLING_PORT_OPENED', EXIST=found )
130	IF ( found ) THEN
131	models = 2
132	PRINT*, ' coupled run'
133	ELSE
134	models = 1
135	PRINT*, ' uncoupled run'
136	ENDIF
137
138	!
139	!-- Do everything for each model
140	DO model = 1, models
141	!
142	!-- Set the model string used to identify the filenames
143	model_string = ''
144	IF ( models == 2 ) THEN
145	PRINT*, ''
146	PRINT, ' combine_plot_fields *'
147	IF ( model == 2 ) THEN
148	model_string = '_O'
149	PRINT*, ' now combining ocean data'
150	PRINT*, ' ========================'
151	ELSE
152	PRINT*, ' now combining atmosphere data'
153	PRINT*, ' ============================='
154	ENDIF
155	ENDIF
156	!
157	!-- 2D-arrays for ISO2D
158	!-- Main loop for the three different cross-sections, starting with
159	!-- xy-section
160	modus = 'XY'
161	PRINT*, ''
162	DO WHILE ( modus == 'XY' .OR. modus == 'XZ' .OR. modus == 'YZ' )
163	!
164	!-- Check, if file from PE0 exists. If it does not exist, PALM did not
165	!-- create any output for this cross-section.
166	danz = 0
167	WRITE (id_string,'(I4.4)') danz
168	INQUIRE ( &
169	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
170	EXIST=found )
171	!
172	!-- Find out the number of files (equal to the number of PEs which
173	!-- have been used in PALM) and open them
174	DO WHILE ( found )
175
176	OPEN ( danz+110, &
177	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
178	FORM='UNFORMATTED' )
179	danz = danz + 1
180	WRITE (id_string,'(I4.4)') danz
181	INQUIRE ( &
182	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
183	EXIST=found )
184
185	ENDDO
186
187	!
188	!-- Inquire whether an iso2d parameter file exists
189	INQUIRE( FILE='PLOT2D_'//modus//'_GLOBAL'//TRIM( model_string ), &
190	EXIST=iso2d_output )
191
192	!
193	!-- Inquire whether a NetCDF file exists
194	INQUIRE( FILE='DATA_2D_'//modus//'_NETCDF'//TRIM( model_string ), &
195	EXIST=netcdf_0 )
196
197	!
198	!-- Inquire whether a NetCDF file for time-averaged data exists
199	INQUIRE( FILE='DATA_2D_'//modus//'_AV_NETCDF'//TRIM( model_string ),&
200	EXIST=netcdf_1 )
201
202	IF ( netcdf_0 .OR. netcdf_1 ) THEN
203	netcdf_output = .TRUE.
204	ELSE
205	netcdf_output = .FALSE.
206	ENDIF
207
208	!
209	!-- Info-output
210	PRINT*, ''
211	PRINT, ' combine_plot_fields *'
212	#if defined( __netcdf )
213	IF ( netcdf_output ) PRINT*, ' NetCDF output enabled'
214	#else
215	IF ( netcdf_output ) THEN
216	PRINT*, '--- Sorry, no NetCDF support on this host'
217	netcdf_output = .FALSE.
218	ENDIF
219	#endif
220	IF ( danz /= 0 ) THEN
221	PRINT*, ' ',modus,'-section: ', danz, ' file(s) found'
222	ELSE
223	PRINT*, ' no ', modus, '-section data available'
224	ENDIF
225
226	IF ( netcdf_output .AND. danz /= 0 ) THEN
227	#if defined( __netcdf )
228	DO av = 0, 1
229
230	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
231	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
232
233	!
234	!-- Open NetCDF dataset
235	IF ( av == 0 ) THEN
236	filename = 'DATA_2D_'//modus//'_NETCDF' &
237	//TRIM( model_string )
238	ELSE
239	filename = 'DATA_2D_'//modus//'_AV_NETCDF' &
240	//TRIM( model_string )
241	ENDIF
242	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
243	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 1 )
244
245	!
246	!-- Get the list of variables (order of variables corresponds with
247	!-- the order of data on the binary file)
248	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
249	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
250	var_list(av) )
251	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 2 )
252
253	!
254	!-- Inquire id of the time coordinate variable
255	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
256	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 3 )
257
258	!
259	!-- Count number of variables; there is one more semicolon in the
260	!-- string than variable names
261	num_var(av) = -1
262	DO i = 1, LEN( var_list(av) )
263	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) +1
264	ENDDO
265
266	!
267	!-- Extract the variable names from the list and inquire their
268	!-- NetCDF IDs
269	pos = INDEX( var_list(av), ';' )
270	!
271	!-- Loop over all variables
272	DO i = 1, num_var(av)
273
274	!
275	!-- Extract variable name from list
276	var_list(av) = var_list(av)(pos+1:)
277	pos = INDEX( var_list(av), ';' )
278	var_name = var_list(av)(1:pos-1)
279
280	!
281	!-- Get variable ID from name
282	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
283	id_var(av,i) )
284	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 4 )
285
286	!
287	!-- Get number of x/y/z levels for that variable
288	nc_stat = NF90_INQUIRE_VARIABLE( id_set(av), id_var(av,i), &
289	dimids = id_dims_loc )
290	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 5 )
291	id_dims(av,:) = id_dims_loc
292
293	!
294	!-- Inquire dimension ID
295	DO j = 1, 4
296	nc_stat = NF90_INQUIRE_DIMENSION( id_set(av), &
297	id_dims(av,j), dimname, levels(av,i) )
298	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 6 )
299
300	IF ( modus == 'XY' .AND. INDEX(dimname, 'z') /= 0 ) EXIT
301	IF ( modus == 'XZ' .AND. INDEX(dimname, 'y') /= 0 ) EXIT
302	IF ( modus == 'YZ' .AND. INDEX(dimname, 'x') /= 0 ) EXIT
303	ENDDO
304
305	ENDDO
306
307	ENDDO ! av = 0, 1
308
309	#endif
310	ENDIF
311
312	!
313	!-- Read the arrays, as long as the end of the file is reached
314	fanz = 0
315	current_level = 1
316	current_var = 999999999
317
318	DO WHILE ( danz /= 0 )
319
320	!
321	!-- Loop over all files (reading data of the subdomains)
322	DO id = 0, danz-1
323	!
324	!-- File from PE0 contains special information at the beginning,
325	!-- concerning the lower and upper indices of the total-domain used
326	!-- in PALM (nxag, nxeg, nyag, nyeg) and the lower and upper indices
327	!-- of the array to be writte by this routine (nxa, nxe, nya,
328	!-- nye). Usually in the horizontal directions nxag=-1 and nxa=0
329	!-- while all other variables have the same value (i.e. nxeg=nxe).
330	!-- Allocate necessary arrays, open the output file and write
331	!-- the coordinate informations needed by ISO2D.
332	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
333	READ ( id+110 ) nxag, nxeg, nyag, nyeg
334	READ ( id+110 ) nxa, nxe, nya, nye
335	ALLOCATE ( eta(nya:nye), ho(nxa:nxe), hu(nxa:nxe), &
336	pf(nxag:nxeg,nyag:nyeg) )
337	READ ( id+110 ) dx, eta, hu, ho
338
339	IF ( iso2d_output ) THEN
340	OPEN ( 2, FILE='PLOT2D_'//modus//TRIM( model_string ), &
341	FORM='UNFORMATTED' )
342	WRITE ( 2 ) dx, eta, hu, ho
343	ENDIF
344	ENDIF
345	!
346	!-- Read output time
347	IF ( netcdf_output .AND. id == 0 ) THEN
348	IF ( netcdf_1 ) THEN
349	READ ( id+110, END=998 ) simulated_time, time_step, av
350	ELSE
351	!
352	!-- For compatibility with earlier PALM versions
353	READ ( id+110, END=998 ) simulated_time, time_step
354	av = 0
355	ENDIF
356	ENDIF
357	!
358	!-- Read subdomain indices
359	READ ( id+110, END=998 ) xa, xe, ya, ye
360	!
361	!-- IF the PE made no output (in case that no part of the
362	!-- cross-section is situated on this PE), indices have the
363	!-- value -1
364	IF ( .NOT. ( xa == -1 .AND. xe == -1 .AND. &
365	ya == -1 .AND. ye == -1 ) ) THEN
366	!
367	!-- Read the subdomain grid-point values
368	ALLOCATE( pf_tmp(xa:xe,ya:ye) )
369	READ ( id+110 ) pf_tmp
370	pf(xa:xe,ya:ye) = pf_tmp
371	DEALLOCATE( pf_tmp )
372	ENDIF
373	IF ( id == 0 ) fanz(av) = fanz(av) + 1
374
375	ENDDO
376	!
377	!-- Write the data of the total domain cross-section
378	IF ( iso2d_output ) WRITE ( 2 ) pf(nxa:nxe,nya:nye)
379
380	!
381	!-- Write same data in NetCDF format
382	IF ( netcdf_output ) THEN
383	#if defined( __netcdf )
384	!
385	!-- Check if a new time step has begun; if yes write data to time
386	!-- axis
387	IF ( current_var(av) > num_var(av) ) THEN
388	current_var(av) = 1
389	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
390	(/ simulated_time /), &
391	start = (/ time_step /), &
392	count = (/ 1 /) )
393	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 7 )
394	ENDIF
395
396	!
397	!-- Now write the data; this is mode dependent
398	SELECT CASE ( modus )
399
400	CASE ( 'XY' )
401	nc_stat = NF90_PUT_VAR( id_set(av), &
402	id_var(av,current_var(av)), &
403	pf(nxa:nxe,nya:nye), &
404	start = (/ 1, 1, current_level(av), time_step /), &
405	count = (/ nxe-nxa+1, nye-nya+1, 1, 1 /) )
406	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 8)
407
408	CASE ( 'XZ' )
409	nc_stat = NF90_PUT_VAR( id_set(av), &
410	id_var(av,current_var(av)), &
411	pf(nxa:nxe,nya:nye), &
412	start = (/ 1, current_level(av), 1, time_step /), &
413	count = (/ nxe-nxa+1, 1, nye-nya+1, 1 /) )
414	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 9)
415
416	CASE ( 'YZ' )
417	nc_stat = NF90_PUT_VAR( id_set(av), &
418	id_var(av,current_var(av)), &
419	pf(nxa:nxe,nya:nye), &
420	start = (/ current_level(av), 1, 1, time_step /), &
421	count = (/ 1, nxe-nxa+1, nye-nya+1, 1 /) )
422	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error(10)
423
424	END SELECT
425
426	!
427	!-- Data is written, check if max level is reached
428	current_level(av) = current_level(av) + 1
429	IF ( current_level(av) > levels(av,current_var(av)) ) THEN
430	current_level(av) = 1
431	current_var(av) = current_var(av) + 1
432	ENDIF
433
434	#endif
435	ENDIF
436
437	ENDDO
438
439	998 IF ( danz /= 0 ) THEN
440	!
441	!-- Print the number of the arrays processed
442	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
443	IF ( fanz(1) /= 0 ) THEN
444	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
445	ENDIF
446
447	!
448	!-- Close all files and deallocate arrays
449	DO id = 0, danz-1
450	CLOSE ( id+110 )
451	ENDDO
452	CLOSE ( 2 )
453	DEALLOCATE ( eta, ho, hu, pf )
454	ENDIF
455
456	!
457	!-- Close the NetCDF file
458	IF ( netcdf_output .AND. danz /= 0 ) THEN
459	#if defined( __netcdf )
460	IF ( netcdf_0 ) THEN
461	nc_stat = NF90_CLOSE( id_set(0) )
462	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 11 )
463	ENDIF
464	IF ( netcdf_1 ) THEN
465	nc_stat = NF90_CLOSE( id_set(1) )
466	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 12 )
467	ENDIF
468	#endif
469	ENDIF
470
471	!
472	!-- Choose the next cross-section
473	SELECT CASE ( modus )
474	CASE ( 'XY' )
475	modus = 'XZ'
476	CASE ( 'XZ' )
477	modus = 'YZ'
478	CASE ( 'YZ' )
479	modus = 'no'
480	END SELECT
481
482	ENDDO
483
484
485	!
486	!-- Combine the 3D-arrays
487
488	!
489	!-- Inquire whether an avs fld file exists
490	INQUIRE( FILE='PLOT3D_FLD'//TRIM( model_string ), EXIST=avs_output )
491
492	!
493	!-- Inquire whether a NetCDF file exists
494	INQUIRE( FILE='DATA_3D_NETCDF'//TRIM( model_string ), EXIST=netcdf_0 )
495
496	!
497	!-- Inquire whether a NetCDF file for time-averaged data exists
498	INQUIRE( FILE='DATA_3D_AV_NETCDF'//TRIM( model_string ), EXIST=netcdf_1 )
499
500	IF ( netcdf_0 .OR. netcdf_1 ) THEN
501	netcdf_output = .TRUE.
502	ELSE
503	netcdf_output = .FALSE.
504	ENDIF
505
506	!
507	!-- Check, if file from PE0 exists
508	danz = 0
509	WRITE (id_string,'(I4.4)') danz
510	INQUIRE ( &
511	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM( id_string ), &
512	EXIST=found )
513
514	!
515	!-- Combination only works, if data are not compressed. In that case,
516	!-- PALM created a flag file (PLOT3D_COMPRESSED)
517	INQUIRE ( FILE='PLOT3D_COMPRESSED'//TRIM( model_string ), &
518	EXIST=compressed )
519
520	!
521	!-- Find out the number of files and open them
522	DO WHILE ( found .AND. .NOT. compressed )
523
524	OPEN ( danz+110, &
525	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
526	FORM='UNFORMATTED')
527	danz = danz + 1
528	WRITE (id_string,'(I4.4)') danz
529	INQUIRE ( &
530	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
531	EXIST=found )
532
533	ENDDO
534
535	!
536	!-- Info-output
537	PRINT*, ' '
538	PRINT, ' combine_plot_fields *'
539	#if defined( __netcdf )
540	IF ( netcdf_output ) PRINT*, ' NetCDF output enabled'
541	#else
542	IF ( netcdf_output ) THEN
543	PRINT*, '--- Sorry, no NetCDF support on this host'
544	netcdf_output = .FALSE.
545	ENDIF
546	#endif
547	IF ( danz /= 0 ) THEN
548	PRINT*, ' 3D-data: ', danz, ' file(s) found'
549	ELSE
550	IF ( found .AND. compressed ) THEN
551	PRINT*, '+++ no 3D-data processing, since data are compressed'
552	ELSE
553	PRINT*, ' no 3D-data file available'
554	ENDIF
555	ENDIF
556
557	IF ( netcdf_output .AND. danz /= 0 ) THEN
558	#if defined( __netcdf )
559	DO av = 0, 1
560
561	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
562	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
563
564	!
565	!-- Open NetCDF dataset
566	IF ( av == 0 ) THEN
567	filename = 'DATA_3D_NETCDF'//TRIM( model_string )
568	ELSE
569	filename = 'DATA_3D_AV_NETCDF'//TRIM( model_string )
570	ENDIF
571	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
572	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 13 )
573
574
575	!
576	!-- Get the list of variables (order of variables corresponds with the
577	!-- order of data on the binary file)
578	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
579	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
580	var_list(av) )
581	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 14 )
582
583	!
584	!-- Inquire id of the time coordinate variable
585	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
586	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 15 )
587
588	!
589	!-- Count number of variables; there is one more semicolon in the
590	!-- string than variable names
591	num_var(av) = -1
592	DO i = 1, LEN( var_list(av) )
593	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) + 1
594	ENDDO
595
596	!
597	!-- Extract the variable names from the list and inquire their NetCDF
598	!-- IDs
599	pos = INDEX( var_list(av), ';' )
600	!
601	!-- Loop over all variables
602	DO i = 1, num_var(av)
603
604	!
605	!-- Extract variable name from list
606	var_list(av) = var_list(av)(pos+1:)
607	pos = INDEX( var_list(av), ';' )
608	var_name = var_list(av)(1:pos-1)
609
610	!
611	!-- Get variable ID from name
612	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
613	id_var(av,i) )
614	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 16 )
615
616	ENDDO
617
618	ENDDO ! av=0,1
619
620	#endif
621	ENDIF
622
623	!
624	!-- Read arrays, until the end of the file is reached
625	current_var = 999999999
626	fanz = 0
627	DO WHILE ( danz /= 0 )
628
629	!
630	!-- Loop over all files
631	DO id = 0, danz-1
632	!
633	!-- File from PE0 contains special information at the beginning,
634	!-- concerning the lower and upper indices of the total-domain used in
635	!-- PALM (nxag, nxeg, nyag, nyeg, nzag, nzeg) and the lower and upper
636	!-- indices of the array to be written by this routine (nxa, nxe, nya,
637	!-- nye, nza, nze). Usually nxag=-1 and nxa=0, nyag=-1 and nya=0,
638	!-- nzeg=nz and nze=nz_plot3d.
639	!-- Allocate necessary array and open the output file.
640	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
641	READ ( id+110 ) nxag, nxeg, nyag, nyeg, nzag, nzeg
642	READ ( id+110 ) nxa, nxe, nya, nye, nza, nze
643	ALLOCATE ( pf3d(nxa:nxe,nya:nye,nza:nze) )
644	IF ( avs_output ) THEN
645	OPEN ( 2, FILE='PLOT3D_DATA'//TRIM( model_string ), &
646	FORM='UNFORMATTED' )
647	ENDIF
648	ENDIF
649
650	!
651	!-- Read output time
652	IF ( netcdf_output .AND. id == 0 ) THEN
653	IF ( netcdf_1 ) THEN
654	READ ( id+110, END=999 ) simulated_time, time_step, av
655	ELSE
656	!
657	!-- For compatibility with earlier PALM versions
658	READ ( id+110, END=999 ) simulated_time, time_step
659	av = 0
660	ENDIF
661	ENDIF
662
663	!
664	!-- Read subdomain indices and grid point values
665	READ ( id+110, END=999 ) xa, xe, ya, ye, za, ze
666	ALLOCATE( pf3d_tmp(xa:xe,ya:ye,za:ze) )
667	READ ( id+110 ) pf3d_tmp
668
669	xxa = MAX( nxa, xa )
670	xxe = MIN( nxe, xe )
671	yya = MAX( nya, ya )
672	yye = MIN( nye, ye )
673	zza = MAX( nza, za )
674	zze = MIN( nze, ze )
675	DO k = zza, zze
676	DO j = yya, yye
677	DO i = xxa, xxe
678	pf3d(i,j,k) = pf3d_tmp(i,j,k)
679	ENDDO
680	ENDDO
681	ENDDO
682
683	DEALLOCATE( pf3d_tmp )
684	IF ( id == 0 ) fanz(av) = fanz(av) + 1
685
686	ENDDO
687
688	!
689	!-- Write data of the total domain
690	IF ( avs_output ) WRITE ( 2 ) pf3d(nxa:nxe,nya:nye,nza:nze)
691
692	!
693	!-- Write same data in NetCDF format
694	IF ( netcdf_output ) THEN
695	#if defined( __netcdf )
696	!
697	!-- Check if a new time step has begun; if yes write data to time axis
698	IF ( current_var(av) > num_var(av) ) THEN
699	current_var(av) = 1
700	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
701	(/ simulated_time /),&
702	start = (/ time_step /), count = (/ 1 /) )
703	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 17 )
704	ENDIF
705
706	!
707	!-- Now write the data
708	nc_stat = NF90_PUT_VAR( id_set(av), id_var(av,current_var(av)), &
709	pf3d, start = (/ 1, 1, 1, time_step /), &
710	count = (/ nxe-nxa+1, nye-nya+1, nze-nza+1, 1 /) )
711	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 18 )
712
713	current_var(av) = current_var(av) + 1
714
715	#endif
716	ENDIF
717
718	ENDDO
719
720	999 IF ( danz /= 0 ) THEN
721	!
722	!-- Print the number of arrays processed
723	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
724	IF ( fanz(1) /= 0 ) THEN
725	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
726	ENDIF
727	!
728	!-- Close all files and deallocate array
729	DO id = 0, danz-1
730	CLOSE ( id+110 )
731	ENDDO
732	CLOSE ( 2 )
733	DEALLOCATE ( pf3d )
734	!
735	!-- Close the NetCDF file
736	IF ( netcdf_output ) THEN
737	#if defined( __netcdf )
738	IF ( netcdf_0 ) THEN
739	nc_stat = NF90_CLOSE( id_set(0) )
740	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 19 )
741	ENDIF
742	IF ( netcdf_1 ) THEN
743	nc_stat = NF90_CLOSE( id_set(1) )
744	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
745	ENDIF
746	#endif
747	ENDIF
748	ENDIF
749
750	ENDDO ! models
751
752
753	CONTAINS
754
755
756	SUBROUTINE handle_netcdf_error( errno )
757	!
758	!-- Prints out a text message corresponding to the current NetCDF status
759
760	IMPLICIT NONE
761
762	INTEGER, INTENT(IN) :: errno
763
764	#if defined( __netcdf )
765	IF ( nc_stat /= NF90_NOERR ) THEN
766	PRINT*, '+++ combine_plot_fields netcdf: ', av, errno, &
767	TRIM( nf90_strerror( nc_stat ) )
768	ENDIF
769	#endif
770
771	END SUBROUTINE handle_netcdf_error
772
773
774	END PROGRAM combine_plot_fields
775
776
777

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |