Home

Context Navigation

source: palm/trunk/UTIL/combine_plot_fields.f90 @ 1683

Last change on this file since 1683 was 1552, checked in by maronga, 10 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 32.1 KB

Line
1	PROGRAM combine_plot_fields
2
3	!------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2014 Leibniz Universitaet Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: combine_plot_fields.f90 1552 2015-03-03 14:27:15Z knoop $
27	!
28	! 1551 2015-03-03 14:18:16Z maronga
29	! Adjustments for data output of soil model quantities
30	!
31	! 1468 2014-09-24 14:06:57Z maronga
32	! Adapted for use on up to 6-digit processor cores (not tested)
33	!
34	! 1394 2014-05-06 10:17:31Z keck
35	! KIND-attribute added to all INTEGER and REAL declaration statements
36	!
37	! 1046 2012-11-09 14:38:45Z maronga
38	! code put under GPL (PALM 3.9)
39	!
40	! 691 2011-03-04 08:45:30Z maronga
41	! Bugfix: check for precursor ocean runs, removed typo
42	!
43	! 493 2010-03-01 08:30:24Z raasch
44	! Exit in case of already complete NetCDF data (due to parallel output in PALM)
45	! cpu measurements included
46	!
47	! 210 2008-11-06 08:54:02Z raasch
48	! Size of pf3d adjusted to the required output size (1 gridpoint less, along
49	! all three dimensions), because output of a subset of the data
50	! (pf3d(nxa:nxe...) in the NF90_PUT_VAR statement caused segmentation fault
51	! with the INTEL compiler.
52	! Subdomain data are read into temporary arrays pf_tmp/pf3d_tmp in order to
53	! avoid INTEL compiler warnings about (automatic) creation of temporary arrays
54	! Bugfix: three misplaced #endif directives
55	!
56	! 114 2007-10-10 00:03:15Z raasch
57	! Bugfix: model_string needed a default value
58	!
59	! Aug 07 Loop for processing of output by coupled runs, id_string does not
60	! contain modus any longer
61	!
62	! 18/01/06 Output of time-averaged data
63	!
64	! 25/05/05 Errors removed
65	!
66	! 26/04/05 Output in NetCDF format, iso2d and avs output only if parameter
67	! file exists
68	!
69	! 31/10/01 All comments and messages translated into English
70	!
71	! 23/02/99 Keine Bearbeitung komprimierter 3D-Daten
72	! Ursprungsversion vom 28/07/97
73	!
74	!
75	! Description:
76	! ------------
77	! This routine combines data of the PALM-subdomains into one file. In PALM
78	! every processor element opens its own file and writes 2D- or 3D-binary-data
79	! into it (different files are opened for xy-, xz-, yz-cross-sections and
80	! 3D-data). For plotting or analyzing these PE-data have to be collected and
81	! to be put into single files, which is done by this routine.
82	! Output format is NetCDF. Additionally, a data are output in a binary format
83	! readable by ISO2D-software (cross-sections) and by AVS (3D-data).
84	!------------------------------------------------------------------------------!
85
86	#if defined( __netcdf )
87	USE netcdf
88	#endif
89
90	IMPLICIT NONE
91
92	!
93	!-- Local variables
94	CHARACTER (LEN=2) :: modus, model_string
95	CHARACTER (LEN=6) :: id_string
96	CHARACTER (LEN=20) :: dimname, var_name
97	CHARACTER (LEN=40) :: filename
98
99	CHARACTER (LEN=2000), DIMENSION(0:1) :: var_list
100
101	INTEGER, PARAMETER :: iwp = 4, spk = SELECTED_REAL_KIND( 6 ), wp = 8
102
103	INTEGER(iwp) :: av, danz, i, id, j, k, model, models, nc_stat, &
104	nxa, nxag, nxe, nxeg, nya, nyag, nye, nyeg, &
105	nza, nze, pos, time_step, &
106	xa, xe, xxa, xxe, ya, ya_do, ya_tot, ye, ye_do, ye_tot, yya, yye, za, &
107	ze, zza, zze
108
109	#if defined( __lc ) \|\| defined( __decalpha )
110	INTEGER(8) :: count, count_rate
111	#elif defined( __nec )
112	INTEGER(iwp) :: count, count_rate
113	#elif defined( __ibm )
114	INTEGER(8) :: IRTC
115	#endif
116
117	INTEGER(iwp), DIMENSION(0:1) :: current_level, current_var, &
118	fanz, id_set, id_var_time, num_var
119	INTEGER(iwp), DIMENSION(4) :: id_dims_loc
120	INTEGER(iwp), DIMENSION(0:1,4) :: id_dims
121	INTEGER(iwp), DIMENSION(0:1,1000) :: id_var, levels
122
123	LOGICAL :: avs_output, compressed, found, iso2d_output, netcdf_output, &
124	netcdf_parallel, netcdf_0, netcdf_1
125
126	REAL(wp) :: cpu_start_time, cpu_end_time, dx, simulated_time
127	REAL(wp), DIMENSION(:), ALLOCATABLE :: eta, ho, hu
128	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: pf, pf_tmp
129	REAL(spk), DIMENSION(:,:,:), ALLOCATABLE :: pf3d, pf3d_tmp
130
131	PRINT*, ''
132	PRINT*, ''
133	PRINT, ' combine_plot_fields *'
134
135	!
136	!-- Find out if a coupled run has been carried out
137	INQUIRE( FILE='COUPLING_PORT_OPENED', EXIST=found )
138	IF ( found ) THEN
139	models = 2
140	PRINT*, ' coupled run'
141	ELSE
142	models = 1
143	PRINT*, ' uncoupled run'
144	ENDIF
145
146	!
147	!-- Find out if a precursor ocean run has been carried out
148	INQUIRE( FILE='PRECURSOR_OCEAN', EXIST=found )
149	IF ( found ) THEN
150	model_string = '_O'
151	PRINT*, ' precursor ocean run'
152	ELSE
153	model_string = ''
154	ENDIF
155
156	!
157	!-- Do everything for each model
158	DO model = 1, models
159	!
160	!-- Set the model string used to identify the filenames
161	IF ( models == 2 ) THEN
162	PRINT*, ''
163	PRINT, ' combine_plot_fields *'
164	IF ( model == 2 ) THEN
165	model_string = '_O'
166	PRINT*, ' now combining ocean data'
167	PRINT*, ' ========================'
168	ELSE
169	PRINT*, ' now combining atmosphere data'
170	PRINT*, ' ============================='
171	ENDIF
172	ENDIF
173	!
174	!-- 2D-arrays for ISO2D
175	!-- Main loop for the three different cross-sections, starting with
176	!-- xy-section
177	modus = 'XY'
178	PRINT*, ''
179	DO WHILE ( modus == 'XY' .OR. modus == 'XZ' .OR. modus == 'YZ' )
180	!
181	!-- Take current time
182	#if defined( __lc ) \|\| defined( __decalpha ) \|\| defined( __nec )
183	CALL SYSTEM_CLOCK( count, count_rate )
184	cpu_start_time = REAL( count ) / REAL( count_rate )
185	#elif defined( __ibm )
186	cpu_start_time = IRTC( ) * 1E-9
187	#else
188	PRINT*, '+++ INFORMATIVE: no time measurement defined on this host'
189	#endif
190
191	netcdf_parallel = .FALSE.
192	!
193	!-- Check, if file from PE0 exists. If it does not exist, PALM did not
194	!-- create any output for this cross-section.
195	danz = 0
196	WRITE (id_string,'(I6.6)') danz
197	INQUIRE ( &
198	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
199	EXIST=found )
200	!
201	!-- Find out the number of files (equal to the number of PEs which
202	!-- have been used in PALM) and open them
203	DO WHILE ( found )
204
205	OPEN ( danz+110, &
206	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
207	FORM='UNFORMATTED' )
208	danz = danz + 1
209	WRITE (id_string,'(I6.6)') danz
210	INQUIRE ( &
211	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
212	EXIST=found )
213
214	ENDDO
215
216	!
217	!-- Inquire whether an iso2d parameter file exists
218	INQUIRE( FILE='PLOT2D_'//modus//'_GLOBAL'//TRIM( model_string ), &
219	EXIST=iso2d_output )
220
221	!
222	!-- Inquire whether a NetCDF file exists
223	INQUIRE( FILE='DATA_2D_'//modus//'_NETCDF'//TRIM( model_string ), &
224	EXIST=netcdf_0 )
225
226	!
227	!-- Inquire whether a NetCDF file for time-averaged data exists
228	INQUIRE( FILE='DATA_2D_'//modus//'_AV_NETCDF'//TRIM( model_string ),&
229	EXIST=netcdf_1 )
230
231	IF ( netcdf_0 .OR. netcdf_1 ) THEN
232	netcdf_output = .TRUE.
233	!
234	!-- Inquire whether the NetCDF file is already complete (parallel
235	!-- output)
236	INQUIRE( FILE='NO_COMBINE_PLOT_FIELDS_'//modus, &
237	EXIST=netcdf_parallel )
238	IF ( netcdf_parallel ) THEN
239	netcdf_parallel = .TRUE.
240	ELSE
241	netcdf_parallel = .FALSE.
242	ENDIF
243	ELSE
244	netcdf_output = .FALSE.
245	ENDIF
246
247	!
248	!-- Info-output
249	PRINT*, ''
250	PRINT, ' combine_plot_fields *'
251	#if defined( __netcdf )
252	IF ( netcdf_output ) THEN
253	IF ( netcdf_parallel ) THEN
254	PRINT*, ' NetCDF ' // modus // '-data are in one file ', &
255	'(NetCDF4-format) - merging not neccessary'
256	ELSE
257	PRINT*, ' NetCDF output enabled'
258	ENDIF
259	ENDIF
260	#else
261	IF ( netcdf_output ) THEN
262	PRINT*, '--- Sorry, no NetCDF support on this host'
263	netcdf_output = .FALSE.
264	ENDIF
265	#endif
266	IF ( .NOT. netcdf_parallel ) THEN
267	IF ( danz /= 0 ) THEN
268	PRINT*, ' ',modus,'-section: ', danz, ' file(s) found'
269	ELSE
270	PRINT*, ' no ', modus, '-section data available'
271	ENDIF
272	ENDIF
273
274	IF ( netcdf_output .AND. .NOT. netcdf_parallel .AND. danz /= 0 ) &
275	THEN
276	#if defined( __netcdf )
277	DO av = 0, 1
278
279	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
280	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
281
282	!
283	!-- Open NetCDF dataset
284	IF ( av == 0 ) THEN
285	filename = 'DATA_2D_'//modus//'_NETCDF' &
286	//TRIM( model_string )
287	ELSE
288	filename = 'DATA_2D_'//modus//'_AV_NETCDF' &
289	//TRIM( model_string )
290	ENDIF
291	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
292	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 1 )
293
294	!
295	!-- Get the list of variables (order of variables corresponds with
296	!-- the order of data on the binary file)
297	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
298	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
299	var_list(av) )
300	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 2 )
301
302	!
303	!-- Inquire id of the time coordinate variable
304	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
305	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 3 )
306
307	!
308	!-- Count number of variables; there is one more semicolon in the
309	!-- string than variable names
310	num_var(av) = -1
311	DO i = 1, LEN( var_list(av) )
312	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) +1
313	ENDDO
314
315	!
316	!-- Extract the variable names from the list and inquire their
317	!-- NetCDF IDs
318	pos = INDEX( var_list(av), ';' )
319	!
320	!-- Loop over all variables
321	DO i = 1, num_var(av)
322
323	!
324	!-- Extract variable name from list
325	var_list(av) = var_list(av)(pos+1:)
326	pos = INDEX( var_list(av), ';' )
327	var_name = var_list(av)(1:pos-1)
328
329	!
330	!-- Get variable ID from name
331	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
332	id_var(av,i) )
333	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 4 )
334
335	!
336	!-- Get number of x/y/z levels for that variable
337	nc_stat = NF90_INQUIRE_VARIABLE( id_set(av), id_var(av,i), &
338	dimids = id_dims_loc )
339	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 5 )
340	id_dims(av,:) = id_dims_loc
341
342	!
343	!-- Inquire dimension ID
344	DO j = 1, 4
345	nc_stat = NF90_INQUIRE_DIMENSION( id_set(av), &
346	id_dims(av,j), dimname, levels(av,i) )
347	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 6 )
348
349	IF ( modus == 'XY' .AND. INDEX(dimname, 'z') /= 0 ) EXIT
350	IF ( modus == 'XZ' .AND. INDEX(dimname, 'y') /= 0 ) EXIT
351	IF ( modus == 'YZ' .AND. INDEX(dimname, 'x') /= 0 ) EXIT
352	ENDDO
353
354	ENDDO
355
356	ENDDO ! av = 0, 1
357
358	#endif
359	ENDIF
360
361	!
362	!-- Read the arrays, as long as the end of the file is reached
363	IF ( .NOT. netcdf_parallel ) THEN
364
365	fanz = 0
366	current_level = 1
367	current_var = 999999999
368
369	DO WHILE ( danz /= 0 )
370
371	!
372	!-- Loop over all files (reading data of the subdomains)
373	DO id = 0, danz-1
374	!
375	!-- File from PE0 contains special information at the beginning,
376	!-- concerning the lower and upper indices of the total-domain
377	!-- used in PALM (nxag, nxeg, nyag, nyeg) and the lower and
378	!-- upper indices of the array to be written by this routine
379	!-- (nxa, nxe, nya, nye). Usually in the horizontal directions
380	!-- nxag=-1 and nxa=0 while all other variables have the same
381	!-- value (i.e. nxeg=nxe).
382	!-- Allocate necessary arrays, open the output file and write
383	!-- the coordinate informations needed by ISO2D.
384	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
385	READ ( id+110 ) nxag, nxeg, nyag, nyeg
386	READ ( id+110 ) nxa, nxe, nya, nye
387	ALLOCATE ( eta(nya:nye), ho(nxa:nxe), hu(nxa:nxe), &
388	pf(nxag:nxeg,nyag:nyeg) )
389	READ ( id+110 ) dx, eta, hu, ho
390
391
392	!
393	!-- Set actual domain bounds to total domain
394	ya_do = nya
395	ye_do = nye
396
397	IF ( iso2d_output ) THEN
398	OPEN ( 2, FILE='PLOT2D_'//modus//TRIM( model_string ),&
399	FORM='UNFORMATTED' )
400	WRITE ( 2 ) dx, eta, hu, ho
401	ENDIF
402	ENDIF
403	!
404	!-- Read output time
405	IF ( netcdf_output .AND. id == 0 ) THEN
406	IF ( netcdf_1 ) THEN
407	READ ( id+110, END=998 ) simulated_time, time_step, av
408	ELSE
409	!
410	!-- For compatibility with earlier PALM versions
411	READ ( id+110, END=998 ) simulated_time, time_step
412	av = 0
413	ENDIF
414	ENDIF
415	!
416	!-- Read subdomain indices
417	READ ( id+110, END=998 ) xa, xe, ya, ye, ya_tot, ye_tot
418
419	!
420	!-- IF the PE made no output (in case that no part of the
421	!-- cross-section is situated on this PE), indices have the
422	!-- value -1
423	IF ( .NOT. ( xa == -1 .AND. xe == -1 .AND. &
424	ya == -1 .AND. ye == -1 ) ) THEN
425
426
427	!
428	!-- Read the subdomain grid-point values
429	ALLOCATE( pf_tmp(xa:xe,ya:ye) )
430	READ ( id+110 ) pf_tmp
431	!
432	!-- Calculate indices on atmospheric grid (e.g. for soil model
433	!-- quantities)
434	IF ( ya /= ya_tot .OR. ye /= ye_tot ) THEN
435	ye_do = ye - ya
436	ya_do = ya
437	pf(xa:xe,ya_do:ye_do) = pf_tmp
438	ELSE
439	ye_do = nye
440	ya_do = nya
441	pf(xa:xe,ya:ye) = pf_tmp
442	ENDIF
443
444	DEALLOCATE( pf_tmp )
445	ENDIF
446	IF ( id == 0 ) fanz(av) = fanz(av) + 1
447
448	ENDDO
449	!
450	!-- Write the data of the total domain cross-section
451	IF ( iso2d_output ) WRITE ( 2 ) pf(nxa:nxe,nya:nye)
452
453	!
454	!-- Write same data in NetCDF format
455	IF ( netcdf_output ) THEN
456	#if defined( __netcdf )
457	!
458	!-- Check if a new time step has begun; if yes write data to
459	!-- time axis
460	IF ( current_var(av) > num_var(av) ) THEN
461	current_var(av) = 1
462	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
463	(/ simulated_time /), &
464	start = (/ time_step /), &
465	count = (/ 1 /) )
466	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 7 )
467	ENDIF
468
469	!
470	!-- Now write the data; this is mode dependent
471	SELECT CASE ( modus )
472
473	CASE ( 'XY' )
474	nc_stat = NF90_PUT_VAR( id_set(av), &
475	id_var(av,current_var(av)), &
476	pf(nxa:nxe,nya:nye), &
477	start = (/ 1, 1, current_level(av), time_step /), &
478	count = (/ nxe-nxa+1, nye-nya+1, 1, 1 /) )
479	IF ( nc_stat /= NF90_NOERR ) THEN
480	CALL handle_netcdf_error( 8 )
481	ENDIF
482
483	CASE ( 'XZ' )
484	nc_stat = NF90_PUT_VAR( id_set(av), &
485	id_var(av,current_var(av)), &
486	pf(nxa:nxe,ya_do:ye_do), &
487	start = (/ 1, current_level(av), 1, time_step /), &
488	count = (/ nxe-nxa+1, 1, ye_do-ya_do+1, 1 /) )
489	IF ( nc_stat /= NF90_NOERR ) THEN
490	CALL handle_netcdf_error( 9 )
491	ENDIF
492
493	CASE ( 'YZ' )
494	nc_stat = NF90_PUT_VAR( id_set(av), &
495	id_var(av,current_var(av)), &
496	pf(nxa:nxe,ya_do:ye_do), &
497	start = (/ current_level(av), 1, 1, time_step /), &
498	count = (/ 1, nxe-nxa+1, ye_do-ya_do+1, 1 /) )
499	IF ( nc_stat /= NF90_NOERR ) THEN
500	CALL handle_netcdf_error( 10 )
501	ENDIF
502
503	END SELECT
504
505	!
506	!-- Data is written, check if max level is reached
507	current_level(av) = current_level(av) + 1
508	IF ( current_level(av) > levels(av,current_var(av)) ) THEN
509	current_level(av) = 1
510	current_var(av) = current_var(av) + 1
511	ENDIF
512
513	#endif
514	ENDIF
515
516	ENDDO
517
518	ENDIF
519
520	998 IF ( danz /= 0 .AND. .NOT. netcdf_parallel ) THEN
521	!
522	!-- Print the number of the arrays processed
523	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
524	IF ( fanz(1) /= 0 ) THEN
525	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
526	ENDIF
527
528	!
529	!-- Close all files and deallocate arrays
530	DO id = 0, danz-1
531	CLOSE ( id+110 )
532	ENDDO
533	CLOSE ( 2 )
534	DEALLOCATE ( eta, ho, hu, pf )
535
536	!
537	!-- Close the NetCDF file
538	IF ( netcdf_output ) THEN
539	#if defined( __netcdf )
540	IF ( netcdf_0 ) THEN
541	nc_stat = NF90_CLOSE( id_set(0) )
542	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 11 )
543	ENDIF
544	IF ( netcdf_1 ) THEN
545	nc_stat = NF90_CLOSE( id_set(1) )
546	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 12 )
547	ENDIF
548	#endif
549	ENDIF
550	ENDIF
551
552	!
553	!-- Output required cpu time
554	IF ( danz /= 0 .AND. .NOT. netcdf_parallel ) THEN
555	#if defined( __lc ) \|\| defined( __decalpha ) \|\| defined( __nec )
556	CALL SYSTEM_CLOCK( count, count_rate )
557	cpu_end_time = REAL( count ) / REAL( count_rate )
558	WRITE (*,'(5X,A,F9.3,A)') 'Required cpu-time: ', &
559	cpu_end_time-cpu_start_time, ' sec'
560	#elif defined( __ibm )
561	cpu_end_time = IRTC( ) * 1E-9
562	WRITE (*,'(5X,A,F9.3,A)') 'Required cpu-time: ', &
563	cpu_end_time-cpu_start_time, ' sec'
564	#else
565	CONTINUE
566	#endif
567	ENDIF
568
569	!
570	!-- Choose the next cross-section
571	SELECT CASE ( modus )
572	CASE ( 'XY' )
573	modus = 'XZ'
574	CASE ( 'XZ' )
575	modus = 'YZ'
576	CASE ( 'YZ' )
577	modus = 'no'
578	END SELECT
579
580	ENDDO
581
582
583	!
584	!-- Combine the 3D-arrays
585	netcdf_parallel = .FALSE.
586
587	!
588	!-- Info-output
589	PRINT*, ' '
590	PRINT, ' combine_plot_fields *'
591
592	!
593	!-- Take current time
594	#if defined( __lc ) \|\| defined( __decalpha ) \|\| defined( __nec )
595	CALL SYSTEM_CLOCK( count, count_rate )
596	cpu_start_time = REAL( count ) / REAL( count_rate )
597	#elif defined( __ibm )
598	cpu_start_time = IRTC( ) * 1E-9
599	#else
600	PRINT*, '+++ INFORMATIVE: no time measurement defined on this host'
601	#endif
602
603	!
604	!-- Inquire whether an avs fld file exists
605	INQUIRE( FILE='PLOT3D_FLD'//TRIM( model_string ), EXIST=avs_output )
606
607	!
608	!-- Inquire whether a NetCDF file exists
609	INQUIRE( FILE='DATA_3D_NETCDF'//TRIM( model_string ), EXIST=netcdf_0 )
610
611	!
612	!-- Inquire whether a NetCDF file for time-averaged data exists
613	INQUIRE( FILE='DATA_3D_AV_NETCDF'//TRIM( model_string ), EXIST=netcdf_1 )
614
615	IF ( netcdf_0 .OR. netcdf_1 ) THEN
616	netcdf_output = .TRUE.
617	!
618	!-- Inquire whether the NetCDF file is already complete (parallel output)
619	INQUIRE( FILE='NO_COMBINE_PLOT_FIELDS_3D', EXIST=netcdf_parallel )
620	IF ( netcdf_parallel ) THEN
621	netcdf_parallel = .TRUE.
622	ELSE
623	netcdf_parallel = .FALSE.
624	ENDIF
625	ELSE
626	netcdf_output = .FALSE.
627	ENDIF
628
629	!
630	!-- Check, if file from PE0 exists; not neccessary in case of parallel
631	!-- PALM output
632	IF ( .NOT. netcdf_parallel ) THEN
633	danz = 0
634	WRITE (id_string,'(I6.6)') danz
635	INQUIRE ( &
636	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM( id_string ), &
637	EXIST=found )
638	ELSE
639	found = .FALSE.
640	ENDIF
641
642	!
643	!-- Combination only works, if data are not compressed. In that case,
644	!-- PALM created a flag file (PLOT3D_COMPRESSED)
645	INQUIRE ( FILE='PLOT3D_COMPRESSED'//TRIM( model_string ), &
646	EXIST=compressed )
647
648	!
649	!-- Find out the number of files and open them
650	DO WHILE ( found .AND. .NOT. compressed )
651
652	OPEN ( danz+110, &
653	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
654	FORM='UNFORMATTED')
655	danz = danz + 1
656	WRITE (id_string,'(I6.6)') danz
657	INQUIRE ( &
658	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
659	EXIST=found )
660
661	ENDDO
662
663	#if defined( __netcdf )
664	IF ( netcdf_output ) THEN
665	IF ( netcdf_parallel ) THEN
666	PRINT*, ' NetCDF data are in one file (NetCDF4-format)', &
667	' - merging not neccessary'
668	ELSE
669	PRINT*, ' NetCDF output enabled'
670	ENDIF
671	ENDIF
672	#else
673	IF ( netcdf_output ) THEN
674	PRINT*, '--- Sorry, no NetCDF support on this host'
675	netcdf_output = .FALSE.
676	ENDIF
677	#endif
678	IF ( .NOT. netcdf_parallel ) THEN
679	IF ( danz /= 0 ) THEN
680	PRINT*, ' 3D-data: ', danz, ' file(s) found'
681	ELSE
682	IF ( found .AND. compressed ) THEN
683	PRINT*, '+++ no 3D-data processing, since data are compressed'
684	ELSE
685	PRINT*, ' no 3D-data file available'
686	ENDIF
687	ENDIF
688	ENDIF
689
690	IF ( netcdf_output .AND. .NOT. netcdf_parallel .AND. danz /= 0 ) THEN
691	#if defined( __netcdf )
692	DO av = 0, 1
693
694	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
695	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
696
697	!
698	!-- Open NetCDF dataset
699	IF ( av == 0 ) THEN
700	filename = 'DATA_3D_NETCDF'//TRIM( model_string )
701	ELSE
702	filename = 'DATA_3D_AV_NETCDF'//TRIM( model_string )
703	ENDIF
704	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
705	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 13 )
706
707
708	!
709	!-- Get the list of variables (order of variables corresponds with the
710	!-- order of data on the binary file)
711	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
712	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
713	var_list(av) )
714	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 14 )
715
716	!
717	!-- Inquire id of the time coordinate variable
718	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
719	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 15 )
720
721	!
722	!-- Count number of variables; there is one more semicolon in the
723	!-- string than variable names
724	num_var(av) = -1
725	DO i = 1, LEN( var_list(av) )
726	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) + 1
727	ENDDO
728
729	!
730	!-- Extract the variable names from the list and inquire their NetCDF
731	!-- IDs
732	pos = INDEX( var_list(av), ';' )
733	!
734	!-- Loop over all variables
735	DO i = 1, num_var(av)
736
737	!
738	!-- Extract variable name from list
739	var_list(av) = var_list(av)(pos+1:)
740	pos = INDEX( var_list(av), ';' )
741	var_name = var_list(av)(1:pos-1)
742
743	!
744	!-- Get variable ID from name
745	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
746	id_var(av,i) )
747	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 16 )
748
749	ENDDO
750
751	ENDDO ! av=0,1
752
753	#endif
754	ENDIF
755
756	!
757	!-- Read arrays, until the end of the file is reached
758	IF ( .NOT. netcdf_parallel ) THEN
759
760	current_var = 999999999
761	fanz = 0
762	DO WHILE ( danz /= 0 )
763
764	!
765	!-- Loop over all files
766	DO id = 0, danz-1
767	!
768	!-- File from PE0 contains special information at the beginning,
769	!-- concerning the lower and upper indices of the total-domain used
770	!-- in PALM (nxag, nxeg, nyag, nyeg) and the lower and
771	!-- upper indices of the array to be written by this routine (nxa,
772	!-- nxe, nya, nye, nza, nze). Usually nxag=-1 and nxa=0, nyag=-1
773	!-- and nya=0, nzeg=nz and nze=nz_do3d.
774	!-- Allocate necessary array and open the output file.
775	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
776	READ ( id+110 ) nxag, nxeg, nyag, nyeg
777	READ ( id+110 ) nxa, nxe, nya, nye, nza, nze
778	ALLOCATE ( pf3d(nxa:nxe,nya:nye,nza:nze) )
779	IF ( avs_output ) THEN
780	OPEN ( 2, FILE='PLOT3D_DATA'//TRIM( model_string ), &
781	FORM='UNFORMATTED' )
782	ENDIF
783	ENDIF
784
785	!
786	!-- Read output time
787	IF ( netcdf_output .AND. id == 0 ) THEN
788	IF ( netcdf_1 ) THEN
789	READ ( id+110, END=999 ) simulated_time, time_step, av
790	ELSE
791	!
792	!-- For compatibility with earlier PALM versions
793	READ ( id+110, END=999 ) simulated_time, time_step
794	av = 0
795	ENDIF
796	ENDIF
797
798	!
799	!-- Read subdomain indices and grid point values
800	READ ( id+110, END=999 ) xa, xe, ya, ye, za, ze
801	ALLOCATE( pf3d_tmp(xa:xe,ya:ye,za:ze) )
802	READ ( id+110 ) pf3d_tmp
803
804	xxa = MAX( nxa, xa )
805	xxe = MIN( nxe, xe )
806	yya = MAX( nya, ya )
807	yye = MIN( nye, ye )
808	DO k = za, ze
809	DO j = yya, yye
810	DO i = xxa, xxe
811	pf3d(i,j,k) = pf3d_tmp(i,j,k)
812	ENDDO
813	ENDDO
814	ENDDO
815
816	DEALLOCATE( pf3d_tmp )
817	IF ( id == 0 ) fanz(av) = fanz(av) + 1
818
819	ENDDO
820
821	!
822	!-- Write data of the total domain
823	IF ( avs_output ) WRITE ( 2 ) pf3d(nxa:nxe,nya:nye,nza:nze)
824
825	!
826	!-- Write same data in NetCDF format
827	IF ( netcdf_output ) THEN
828	#if defined( __netcdf )
829	!
830	!-- Check if a new time step has begun; if yes write data to time
831	!-- axis
832	IF ( current_var(av) > num_var(av) ) THEN
833	current_var(av) = 1
834	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
835	(/ simulated_time /),&
836	start = (/ time_step /), count = (/ 1 /) )
837	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 17 )
838	ENDIF
839
840	!
841	!-- Now write the data
842	nc_stat = NF90_PUT_VAR( id_set(av), id_var(av,current_var(av)),&
843	pf3d(nxa:nxe,nya:nye,za:ze), start = (/ 1, 1, 1, time_step /),&
844	count = (/ nxe-nxa+1, nye-nya+1, ze-za+1, 1 /) )
845	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 18 )
846
847	current_var(av) = current_var(av) + 1
848
849	#endif
850	ENDIF
851
852	ENDDO
853
854	ENDIF
855
856	999 IF ( danz /= 0 .AND. .NOT. netcdf_parallel ) THEN
857	!
858	!-- Print the number of arrays processed
859	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
860	IF ( fanz(1) /= 0 ) THEN
861	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
862	ENDIF
863	!
864	!-- Close all files and deallocate array
865	DO id = 0, danz-1
866	CLOSE ( id+110 )
867	ENDDO
868	CLOSE ( 2 )
869	DEALLOCATE ( pf3d )
870	!
871	!-- Close the NetCDF file
872	IF ( netcdf_output ) THEN
873	#if defined( __netcdf )
874	IF ( netcdf_0 ) THEN
875	nc_stat = NF90_CLOSE( id_set(0) )
876	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 19 )
877	ENDIF
878	IF ( netcdf_1 ) THEN
879	nc_stat = NF90_CLOSE( id_set(1) )
880	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
881	ENDIF
882	#endif
883	ENDIF
884
885	!
886	!-- Output required cpu time
887	#if defined( __lc ) \|\| defined( __decalpha ) \|\| defined( __nec )
888	CALL SYSTEM_CLOCK( count, count_rate )
889	cpu_end_time = REAL( count ) / REAL( count_rate )
890	WRITE (*,'(5X,A,F9.3,A)') 'Required cpu-time: ', &
891	cpu_end_time-cpu_start_time, ' sec'
892	#elif defined( __ibm )
893	cpu_end_time = IRTC( ) * 1E-9
894	WRITE (*,'(5X,A,F9.3,A)') 'Required cpu-time: ', &
895	cpu_end_time-cpu_start_time, ' sec'
896	#endif
897
898	ENDIF
899
900	ENDDO ! models
901
902
903	CONTAINS
904
905
906	SUBROUTINE handle_netcdf_error( errno )
907	!
908	!-- Prints out a text message corresponding to the current NetCDF status
909
910	IMPLICIT NONE
911
912	INTEGER, INTENT(IN) :: errno
913
914	#if defined( __netcdf )
915	IF ( nc_stat /= NF90_NOERR ) THEN
916	PRINT*, '+++ combine_plot_fields netcdf: ', av, errno, &
917	TRIM( nf90_strerror( nc_stat ) )
918	ENDIF
919	#endif
920
921	END SUBROUTINE handle_netcdf_error
922
923
924	END PROGRAM combine_plot_fields
925
926
927

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |