source: palm/trunk/TUTORIALS/cases/lsm_short/INPUT/lsm_short_p3d @ 4222

Last change on this file since 4222 was 4222, checked in by gronemeier, 2 years ago

update tutorials flow_around_cube and lsm

File size: 6.5 KB
Line 
1!-------------------------------------------------------------------------------
2!-- INITIALIZATION PARAMETER NAMELIST
3!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/inipar
4!-------------------------------------------------------------------------------
5&initialization_parameters
6!
7!-- grid parameters
8!-------------------------------------------------------------------------------
9    nx                         = 39, ! Number of gridboxes in x-direction (nx+1)
10    ny                         = 39, ! Number of gridboxes in y-direction (ny+1)
11    nz                         = 80, ! Number of gridboxes in z-direction (nz)
12
13    dx                         = 50.0, ! Size of single gridbox in x-direction
14    dy                         = 50.0, ! Size of single gridbox in y-direction
15    dz                         = 25.0, ! Size of single gridbox in z-direction
16!
17!-- initialization
18!------------------------------------------------------------------------------
19    initializing_actions       = 'set_constant_profiles', ! initial conditions
20
21    ug_surface                 = 0.0, ! u-comp of geostrophic wind at surface
22    vg_surface                 = 0.0, ! v-comp of geostrophic wind at surface
23
24    pt_surface                 = 293.0, ! initial surface potential temp
25
26    pt_vertical_gradient       = 0.0,
27                                 2.0, ! piecewise temp gradients
28    pt_vertical_gradient_level = 0.0,
29                                 800.0, ! height level of temp gradients
30
31    day_of_year_init           = 232,     ! Aug 20
32    time_utc_init              = 39600.0, ! 11:00 UTC
33!
34!-- boundary conditions
35!------------------------------------------------------------------------------
36    constant_flux_layer        = .TRUE., ! use a constant flux layer at
37                                         ! the bottom boundary
38
39    bc_pt_b                    = 'dirichlet', ! required when using LSM
40!
41!-- numerics
42!------------------------------------------------------------------------------
43    fft_method                 = 'temperton-algorithm', ! build-in fft method
44
45/ ! end of initialization parameter namelist
46
47!-------------------------------------------------------------------------------
48!-- RUNTIME PARAMETER NAMELIST
49!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/d3par
50!-------------------------------------------------------------------------------
51&runtime_parameters
52!
53!-- run steering
54!-------------------------------------------------------------------------------
55    end_time                   = 7200.0, ! simulation time of the 3D model
56
57    create_disturbances        = .TRUE., ! randomly perturbate horiz. velocity
58    dt_disturb                 = 150.0,  ! interval for random perturbations
59    disturbance_energy_limit   = 0.01,   ! upper limit for perturbation energy
60!
61!-- data output
62!-------------------------------------------------------------------------------
63    netcdf_data_format         = 2, ! use NetCDF3
64
65    dt_run_control             = 60.0,   ! output interval for run control
66    dt_data_output             = 900.0,  ! output interval for general data
67    dt_data_output_av          = 1800.0, ! output interval for averaged data
68    dt_dots                    = 0.0,    ! output interval for time-series data
69    dt_dopr                    = 600.0,  ! output interval for profile data
70    dt_do3d                    = 60.0,   ! output interval for 3d data
71    dt_do2d_xy                 = 60.0,   ! output interval for 2d-xy data
72
73    data_output                = 'theta', 'w', 'u', 'v',
74                                 'us*_xy',
75                                 'ghf*_xy', 'shf*_xy',
76                                 'tsurf*_xy',
77                                 't_soil',    ! 2d and/
78                                              ! or 3d
79                                              ! output
80
81    data_output_pr             = '#u', '#v', '#theta',
82                                 '#km', '#kh', '#l',
83                                 'w', 'e', 'e*', 'p',
84                                 'w"theta"', 'w*theta*', 'wtheta', 'w*e*',
85                                 'theta*2','u*2', 'v*2', 'w*2',
86                                 '#t_soil',                        ! Profile
87                                                                   ! output
88
89    section_xy                 = 0, ! grid index for 2D XY cross sections
90
91    averaging_interval         = 1800.0, ! averaging interval general data
92    dt_averaging_input         =    6.0, ! averaging general data sampling rate
93
94    averaging_interval_pr      = 600.0, ! averaging interval profile data
95    dt_averaging_input_pr      =   6.0, ! averaging profile data sampling rate
96
97/ ! end of runtime parameter namelist
98
99!-------------------------------------------------------------------------------
100!-- LAND-SURFACE PARAMETER NAMELIST
101!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/lsmpar
102!-------------------------------------------------------------------------------
103&land_surface_parameters
104    soil_type                  = 3,  ! type to be used in soil model
105    soil_moisture              = 0.0,   0.0,   0.0,   0.0, ! moisture at every
106                                 0.0,   0.0,   0.0,   0.0, ! soil level
107    soil_temperature           = 293,   293,   293,   293, ! temperature at
108                                 293,   293,   293,   293, ! every soil level
109    deep_soil_temperature      = 293,  ! temperature of deep soil
110
111    surface_type               = 'vegetation',  ! surface classification
112    vegetation_type            = 1, ! vegetation to be used in surface model
113
114/ ! end of land-surface parameter namelist
115
116!-------------------------------------------------------------------------------
117!-- RADIATION PARAMETER NAMELIST
118!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/radpar
119!-------------------------------------------------------------------------------
120&radiation_parameters
121    radiation_scheme           = 'clear-sky', ! Radiation scheme to be used
122    dt_radiation               = 20.0, ! Time step of the radiation model
123
124/ ! end of radiation parameter namelist
125
126!-------------------------------------------------------------------------------
127!-- USER PARAMETER NAMELIST
128!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/userpar
129!-------------------------------------------------------------------------------
130&user_parameters
131    data_output_user           = 'v_h', 'v_h_xy', ! user defined data output
132
133/ ! end of user parameter namelist
Note: See TracBrowser for help on using the repository browser.