| 1 | &initialization_parameters |
|---|
| 2 | ! |
|---|
| 3 | !-- grid parameters |
|---|
| 4 | !------------------------------------------------------------------------------- |
|---|
| 5 | nx = 19, ! Number of gridboxes in x-direction (nx+1) |
|---|
| 6 | ny = 19, ! Number of gridboxes in y-direction (ny+1) |
|---|
| 7 | nz = 50, ! Number of gridboxes in z-direction (nz) |
|---|
| 8 | |
|---|
| 9 | dx = 100.0, ! Size of single gridbox in x-direction |
|---|
| 10 | dy = 100.0, ! Size of single gridbox in y-direction |
|---|
| 11 | dz = 25.0, ! Size of single gridbox in z-direction |
|---|
| 12 | |
|---|
| 13 | dz_stretch_level = 100.0, ! Height (in m) where stretching starts |
|---|
| 14 | dz_max = 50.0, ! maximum vertical grid size |
|---|
| 15 | ! |
|---|
| 16 | !-- initialization |
|---|
| 17 | !------------------------------------------------------------------------------ |
|---|
| 18 | initializing_actions = 'set_constant_profiles', ! initial conditions |
|---|
| 19 | |
|---|
| 20 | ug_surface = 2.5, ! u-comp of geostrophic wind at surface |
|---|
| 21 | vg_surface = 0.0, ! v-comp of geostrophic wind at surface |
|---|
| 22 | |
|---|
| 23 | pt_surface = 293.0, ! initial surface potential temp |
|---|
| 24 | |
|---|
| 25 | pt_vertical_gradient = 0.0, |
|---|
| 26 | 3.0, |
|---|
| 27 | 0.0, ! piecewise temp gradients |
|---|
| 28 | pt_vertical_gradient_level = 0.0, |
|---|
| 29 | 800.0, |
|---|
| 30 | 1600.0, ! height level of temp gradients |
|---|
| 31 | |
|---|
| 32 | q_surface = 0.013, ! mixing ratio --> rel. hum. = ? |
|---|
| 33 | |
|---|
| 34 | surface_pressure = 1000.0, ! in hPa |
|---|
| 35 | |
|---|
| 36 | day_of_year_init = 172, ! June 21 |
|---|
| 37 | time_utc_init = 43200.0, ! 12:00 UTC |
|---|
| 38 | ! |
|---|
| 39 | !-- physics |
|---|
| 40 | !------------------------------------------------------------------------------ |
|---|
| 41 | latitude = 53.37, ! geographical latitude |
|---|
| 42 | longitude = 9.73, ! geographical longitude |
|---|
| 43 | ! |
|---|
| 44 | !-- boundary conditions |
|---|
| 45 | !------------------------------------------------------------------------------ |
|---|
| 46 | constant_flux_layer = .TRUE., ! use a constant flux layer at |
|---|
| 47 | ! the bottom boundary |
|---|
| 48 | |
|---|
| 49 | bc_pt_b = 'dirichlet', ! required when using LSM |
|---|
| 50 | bc_q_b = 'dirichlet', ! required when using LSM |
|---|
| 51 | ! |
|---|
| 52 | !-- mode |
|---|
| 53 | !------------------------------------------------------------------------------ |
|---|
| 54 | humidity = .TRUE., ! use prognostic equation for humidity |
|---|
| 55 | |
|---|
| 56 | reference_state = 'horizontal_average', ! set reference state for |
|---|
| 57 | ! buoyancy term |
|---|
| 58 | ! |
|---|
| 59 | !-- numerics |
|---|
| 60 | !------------------------------------------------------------------------------ |
|---|
| 61 | fft_method = 'temperton-algorithm', ! build-in fft method |
|---|
| 62 | |
|---|
| 63 | rayleigh_damping_height = 1600.0, ! starting height for Rayleigh damping |
|---|
| 64 | rayleigh_damping_factor = 0.01, ! strength of Rayleigh damping |
|---|
| 65 | |
|---|
| 66 | / ! end of initialization parameter namelist |
|---|
| 67 | |
|---|
| 68 | !------------------------------------------------------------------------------- |
|---|
| 69 | !-- RUNTIME PARAMETER NAMELIST |
|---|
| 70 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/d3par |
|---|
| 71 | !------------------------------------------------------------------------------- |
|---|
| 72 | &runtime_parameters |
|---|
| 73 | ! |
|---|
| 74 | !-- run steering |
|---|
| 75 | !------------------------------------------------------------------------------- |
|---|
| 76 | end_time = 216000.0, ! simulation time of the 3D model |
|---|
| 77 | ! (2.5 days) |
|---|
| 78 | |
|---|
| 79 | create_disturbances = .T., ! randomly perturbate horiz. velocity |
|---|
| 80 | dt_disturb = 120.0, ! interval for random perturbations |
|---|
| 81 | disturbance_energy_limit = 0.0001, ! upper limit for perturbation energy |
|---|
| 82 | ! |
|---|
| 83 | !-- data output |
|---|
| 84 | !------------------------------------------------------------------------------ |
|---|
| 85 | netcdf_data_format = 2, ! use NetCDF3 |
|---|
| 86 | |
|---|
| 87 | dt_run_control = 900.0, ! output interval for run control |
|---|
| 88 | dt_data_output = 21600.0, ! output interval for general data |
|---|
| 89 | dt_data_output_av = 3600.0, ! output interval for averaged data |
|---|
| 90 | |
|---|
| 91 | averaging_interval = 1800.0, ! averaging interval general data |
|---|
| 92 | |
|---|
| 93 | data_output_pr = '#u', '#v', '#theta', '#q', '#thetav', |
|---|
| 94 | '#km', '#kh', '#l', |
|---|
| 95 | 'w', 'e', 'e*', 'p', |
|---|
| 96 | 'w"u"', 'w*u*', 'w"v"', 'w*v*', |
|---|
| 97 | 'w"theta"', 'w*theta*', 'w"thetav"', |
|---|
| 98 | 'w*thetav*', |
|---|
| 99 | 'w"q"', 'w*q*', 'w*e*', |
|---|
| 100 | 'theta*2', 'q*2', 'u*2', 'v*2', 'w*2', |
|---|
| 101 | '#t_soil', '#m_soil', ! Profile |
|---|
| 102 | ! output |
|---|
| 103 | |
|---|
| 104 | section_xy = 0, ! surface variables only |
|---|
| 105 | |
|---|
| 106 | data_output = 'theta', 'theta_av', |
|---|
| 107 | 'thetav', 'thetav_av', |
|---|
| 108 | 'q', 'q_av', |
|---|
| 109 | 'u', 'u_av', |
|---|
| 110 | 'v', 'v_av', |
|---|
| 111 | |
|---|
| 112 | 't_soil', 't_soil_av', |
|---|
| 113 | 'm_soil', 'm_soil_av', |
|---|
| 114 | |
|---|
| 115 | 'us*_xy', 'us*_xy_av', |
|---|
| 116 | 't*_xy', 't*_xy_av', |
|---|
| 117 | 'r_a*_xy', 'r_a*_xy_av', |
|---|
| 118 | 'r_s*_xy', 'r_s*_xy_av', |
|---|
| 119 | 'tsurf*_xy', 'tsurf*_xy_av' |
|---|
| 120 | |
|---|
| 121 | 'ghf*_xy', 'ghf*_xy_av', |
|---|
| 122 | 'shf*_xy', 'shf*_xy_av', |
|---|
| 123 | |
|---|
| 124 | 'qsws_liq*_xy', 'qsws_liq*_xy_av', |
|---|
| 125 | 'qsws_soil*_xy', 'qsws_soil*_xy_av', |
|---|
| 126 | 'qsws_veg*_xy', 'qsws_veg*_xy_av', |
|---|
| 127 | |
|---|
| 128 | 'c_liq*_xy', 'c_liq*_xy_av', |
|---|
| 129 | 'c_soil*_xy', 'c_soil*_xy_av', |
|---|
| 130 | 'c_veg*_xy', 'c_veg*_xy_av', ! 2d and/ |
|---|
| 131 | ! or 3d |
|---|
| 132 | ! output |
|---|
| 133 | / ! end of runtime parameter namelist |
|---|
| 134 | |
|---|
| 135 | !------------------------------------------------------------------------------- |
|---|
| 136 | !-- LAND-SURFACE PARAMETER NAMELIST |
|---|
| 137 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/lsmpar |
|---|
| 138 | !------------------------------------------------------------------------------- |
|---|
| 139 | &land_surface_parameters |
|---|
| 140 | soil_type = 3, ! type to be used in soil model |
|---|
| 141 | soil_moisture = 0.35, 0.35, 0.35, 0.35, ! moisture at every |
|---|
| 142 | 0.35, 0.35, 0.35, 0.35, ! soil level |
|---|
| 143 | soil_temperature = 293.0, 293.0, 293.0, 293.0, ! temperature at |
|---|
| 144 | 293.0, 293.0, 293.0, 293.0, ! every soil level |
|---|
| 145 | deep_soil_temperature = 293.0, ! temperature of deep soil |
|---|
| 146 | |
|---|
| 147 | surface_type = 'vegetation', ! surface classification |
|---|
| 148 | vegetation_type = 3, ! vegetation to be used in surface model |
|---|
| 149 | |
|---|
| 150 | vegetation_coverage = 0.95, ! part of surface covered by vegetation |
|---|
| 151 | ! (0 - 1) |
|---|
| 152 | c_surface = 0.0, ! surface heat capacity |
|---|
| 153 | conserve_water_content = .T., ! closed (T) or open (F) lower boundary |
|---|
| 154 | |
|---|
| 155 | / ! end of land-surface parameter namelist |
|---|
| 156 | |
|---|
| 157 | !------------------------------------------------------------------------------- |
|---|
| 158 | !-- RADIATION PARAMETER NAMELIST |
|---|
| 159 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/radpar |
|---|
| 160 | !------------------------------------------------------------------------------- |
|---|
| 161 | &radiation_parameters |
|---|
| 162 | radiation_scheme = 'clear-sky', ! Radiation scheme to be used |
|---|
| 163 | dt_radiation = 60.0, ! Time step of the radiation model |
|---|
| 164 | |
|---|
| 165 | / ! end of radiation parameter namelist |
|---|
