source: palm/trunk/TUTORIAL/SOURCE/exercise_interface.tex @ 1515

Last change on this file since 1515 was 1515, checked in by boeske, 9 years ago

several updates in the tutorial

  • Property svn:keywords set to Id
File size: 8.8 KB
Line 
1% $Id: exercise_interface.tex 1515 2015-01-02 11:35:51Z boeske $
2\input{header_tmp.tex}
3%\input{../header_lectures.tex}
4
5\usepackage[utf8]{inputenc}
6\usepackage{ngerman}
7\usepackage{pgf}
8\usepackage{subfigure}
9\usepackage{units}
10\usepackage{tabto}
11\usepackage{multimedia}
12\usepackage{hyperref}
13\newcommand{\event}[1]{\newcommand{\eventname}{#1}}
14\usepackage{xmpmulti}
15\usepackage{tikz}
16\usetikzlibrary{shapes,arrows,positioning}
17\usetikzlibrary{decorations.markings}             %neues paket
18\usetikzlibrary{decorations.pathreplacing}        %neues paket
19\def\Tiny{\fontsize{4pt}{4pt}\selectfont}
20\usepackage{amsmath}
21\usepackage{amssymb}
22\usepackage{multicol}
23\usepackage{pdfcomment}
24\usepackage{graphicx}
25\usepackage{listings}
26\lstset{language=[90]Fortran,
27  basicstyle=\ttfamily \tiny,
28  keywordstyle=\color{black},
29  commentstyle=\color{black},
30  morecomment=[l]{!\ }% Comment only with space after !
31}
32
33
34\institute{Institute of Meteorology and Climatology, Leibniz UniversitÀt Hannover}
35\selectlanguage{english}
36\date{last update: \today}
37\event{PALM Seminar}
38\setbeamertemplate{navigation symbols}{}
39
40\setbeamertemplate{footline}
41  {
42    \begin{beamercolorbox}[rightskip=-0.1cm]&
43     {\includegraphics[height=0.65cm]{imuk_logo.pdf}\hfill \includegraphics[height=0.65cm]{luh_logo.pdf}}
44    \end{beamercolorbox}
45    \begin{beamercolorbox}[ht=2.5ex,dp=1.125ex,
46      leftskip=.3cm,rightskip=0.3cm plus1fil]{title in head/foot}
47      {\leavevmode{\usebeamerfont{author in head/foot}\insertshortauthor} \hfill \eventname \hfill \insertframenumber \; / \inserttotalframenumber}
48    \end{beamercolorbox}
49    \begin{beamercolorbox}[colsep=1.5pt]{lower separation line foot}
50    \end{beamercolorbox}
51  }
52%\logo{\includegraphics[width=0.3\textwidth]{luhimuk_logo.pdf}}
53
54\title[Exercise 3: User Interface]{Exercise 3: User Interface}
55\author{PALM group}
56
57\setbeamersize{text margin left=.2cm,text margin right=.2cm}
58
59\begin{document}
60\footnotesize
61% Folie 1
62\begin{frame}
63\titlepage
64\end{frame}
65
66\section{Exercise}
67\subsection{Exercise}
68
69% Folie 2
70\begin{frame}
71   \frametitle{Exercise 3: User Interface}
72   \begin{itemize}
73      \item Carry out a run for a convective boundary layer where a surface heat flux is given for a limited rectangular area only.
74
75            \tikzstyle{green} = [rectangle, draw, fill=green!70, minimum size=51pt, font=\tiny]
76            \tikzstyle{red} = [rectangle, draw, fill=red!90, text width=44.77pt, minimum size=20pt, font=\tiny]
77            \tikzstyle{textd} = [rectangle, font=\normalsize]
78            \tikzstyle{line} = [draw, -]
79            \begin{center}
80            \begin{tikzpicture}[auto, node distance=0]
81               \uncover<2->{\node [green] (green) {};}
82               \uncover<3->{\node [red, rotate=90] (red) {};}
83               \uncover<4->{\node [textd] (textd) {d};}
84               \uncover<4->{\draw [latex-,line width=0.8pt] (red.south) -- (textd.east);}
85               \uncover<4->{\draw [latex-,line width=0.8pt] (red.north) -- (textd.west);}
86            \end{tikzpicture}
87            \end{center}
88
89      \item<5-> It should be possible to control the area width d by a user-defined parameter in the parameter file. All other parameters should be chosen as in the example run ({\texttt{\scriptsize example\_cbl}}).
90      \item<6-> Create horizontal and vertical cross sections of variables in order to analyze the flow field.
91      \item<7-> Create mean vertical profiles of temperature and resolved/subgrid-scale heatflux for the total domain but also for the limited rectangular area and the total domain without the limited area. Also create time series for these three domains.\\ 
92      This can be done by using the \textbf{statistic region concept} already implemented in PALM.
93
94   \end{itemize}
95
96\end{frame}
97
98% Folie 3
99\begin{frame}
100   \frametitle{The statistic region concept}
101    \begin{itemize}
102       \item<1-> By default, mean horizontal profiles are calculated and output for the total domain.
103       \item<2-> The user can define up to nine so-called statistic regions, which can be arbitrary subsets of the total domain and PALM will calculate and output mean profiles for these regions too.
104    \end{itemize}
105    \vspace{1em}
106    \onslide<3->\textbf{Procedure:}
107    \begin{enumerate}
108       \item<3-> Set the number of statistic regions you additionally want to define by assigning a value to the {\texttt{\scriptsize {\&}inipar}}-parameter {\texttt{\scriptsize statistic\_regions}}.
109       \item<4-> Within the user-interface ({\texttt{\scriptsize user\_init}}), set the masking array {\texttt{\scriptsize rmask}}. It is an {\texttt{\scriptsize INTEGER}} array with array-bounds
110       \begin{center}
111       {\texttt{\scriptsize rmask(nysg:nyng,nxlg:nxrg,0:9)}}
112       \end{center}
113       The last index represents the respective statistic region (index {\texttt{\scriptsize 0}} stands for total domain). Assign a 1 to each array element (grid point) which shall belong to the respective statistic region.\\
114       {\texttt{\scriptsize rmask}} is pre-set as:
115       \begin{center}
116       {\texttt{\scriptsize rmask(:,:,0:9)   = 1}}
117       \end{center}
118    \end{enumerate}
119\end{frame}
120
121
122% Folie 4
123\begin{frame}
124   \frametitle{Additional hints}
125    \begin{itemize}
126       \item<1-> Keep in mind that every PE calculates for a different subset of the total domain. Array bounds of the total domain are {\texttt{\scriptsize (0:ny,0:nx)}}, those of the subdomains {\texttt{\scriptsize (nys:nyn,nxl:nxr)}}, where {\texttt{\scriptsize nys, nyn, nxl, nxr}} vary for each subdomain.
127       \item<2-> {\texttt{\scriptsize rmask}} can also be used to modify the array which defines the surface heatflux ({\texttt{\scriptsize shf}}):
128       \begin{center}
129       {\texttt{\scriptsize shf $=$ shf * rmask(:,:,1)}}
130       \end{center}
131       sets the surface heatflux to zero at all those array elements (grid points), where {\texttt{\scriptsize rmask(...,1)}} is zero.
132       \item<3-> In case of using the default netCDF format, the profile data for the additional statistic regions are added to the default local file {\texttt{\scriptsize DATA\_1D\_PR\_NETCDF}}.
133       \item<4-> The developing mean flow is quasi two-dimensional (in the xz-plane). You can easily get plots of the mean flow by averaging results along the y-axis. The standard output provides such averages. See description of parameter {\texttt{\scriptsize \textcolor{blue}{section\_xz}}} on how to get averages along y.
134    \end{itemize}
135\end{frame}
136
137% Folie 5
138\begin{frame}
139   \frametitle{If You Finished the Exercise Very Fast:}
140    \begin{itemize}
141       \item<1-> Repeat the simulation, but now for a geostrophic wind of 0.5 m/s
142       \item<2-> The resulting flow will be (should be) quite similar to the flow over an arctic lead.
143    \end{itemize}
144\end{frame}
145
146% Folie 6
147\section{Results \quad \, }
148\subsection{Results}
149
150% Folie 7
151\begin{frame}
152   \frametitle{XY cross-sections}
153   \begin{center}
154      \includegraphics[width=0.415\textwidth]{exercise_interface_figures/xy_shf.eps}
155      \includegraphics[angle=90,width=0.60\textwidth]{exercise_interface_figures/xy_w.eps}\\
156   \end{center}
157\end{frame}
158
159% Folie 8
160\begin{frame}
161   \frametitle{vertical profiles (I)}
162   \begin{center}
163      \includegraphics[angle=90,width=0.8\textwidth]{exercise_interface_figures/pr_pt0.eps}
164   \end{center}
165\end{frame}
166
167% Folie 9
168\begin{frame}
169   \frametitle{XZ cross-sections after 1h (averaged)}
170   \begin{center}
171      \includegraphics[angle=90,width=0.8\textwidth]{exercise_interface_figures/xz_w_avg.eps}\\
172   \end{center}
173\end{frame}
174
175% Folie 10
176\begin{frame}
177   \frametitle{XZ cross-sections after 1h (instantaneous)}
178   \begin{center}
179      \includegraphics[angle=90,width=0.8\textwidth]{exercise_interface_figures/xz_w_y1000.eps}\\
180   \end{center}
181\end{frame}
182
183% Folie 11
184\begin{frame}
185   \frametitle{vertical profiles (II)}
186   \begin{center}
187      \includegraphics[angle=90,width=0.75\textwidth]{exercise_interface_figures/pr_wpt_resolved.eps}
188   \end{center}
189\end{frame}
190
191% Folie 12
192\begin{frame}
193   \frametitle{time series (I)}
194   \begin{center}
195      \includegraphics[angle=90,width=0.7\textwidth]{exercise_interface_figures/ts_pt0.eps}\\
196   \end{center}
197\end{frame}
198
199% Folie 13
200\begin{frame}
201   \frametitle{time series (II)}
202   \begin{center}
203      \includegraphics[angle=90,width=0.7\textwidth]{exercise_interface_figures/ts_wpt0.eps}\\
204   \end{center}
205\end{frame}
206
207% Folie 14
208\begin{frame}
209   \frametitle{time series (III)}
210   \begin{center}
211      \includegraphics[angle=90,width=0.7\textwidth]{exercise_interface_figures/ts_wpt0_sgs.eps}\\
212   \end{center}
213\end{frame}
214
215% Folie 15
216\begin{frame}
217   \frametitle{XZ cross-sections (b) - averaged}
218   \begin{center}
219      \includegraphics[angle=90,width=0.7\textwidth]{exercise_interface_figures/xz_w_avg_wind.eps}
220   \end{center}
221\end{frame}
222
223% Folie 16
224\begin{frame}
225   \frametitle{XZ cross-sections (b) - instantaneous}
226   \begin{center}
227      \includegraphics[angle=90,width=0.7\textwidth]{exercise_interface_figures/xz_w_y250_wind.eps}\\
228   \end{center}
229\end{frame}
230
231
232\end{document}
Note: See TracBrowser for help on using the repository browser.