source: palm/trunk/TESTS/cases/warm_air_bubble_with_bcm/INPUT/warm_air_bubble_with_bcm_p3d @ 4843

Last change on this file since 4843 was 4843, checked in by raasch, 13 months ago

local namelist parameter added to switch off the module although the respective module namelist appears in the namelist file, further copyright updates

File size: 5.4 KB
Line 
1!-------------------------------------------------------------------------------
2!-- INITIALIZATION PARAMETER NAMELIST
3!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/inipar
4!-------------------------------------------------------------------------------
5&initialization_parameters
6!
7!-- grid parameters
8!-------------------------------------------------------------------------------
9    nx                         = 39, ! Number of gridboxes in x-direction (nx+1)
10    ny                         = 39, ! Number of gridboxes in y-direction (ny+1)
11    nz                         = 40, ! Number of gridboxes in z-direction (nz)
12
13    dx                         = 50.0, ! Size of single gridbox in x-direction
14    dy                         = 50.0, ! Size of single gridbox in y-direction
15    dz                         = 50.0, ! Size of single gridbox in z-direction
16
17    dz_stretch_level           = 1000.0, ! Height (in m) where stretching starts
18    dz_stretch_factor          = 1.08,   ! dz(k+1) = dz(k) * dz_stretch_factor
19
20!
21!-- initialization and vertical profiles
22!-------------------------------------------------------------------------------
23    initializing_actions       = 'set_constant_profiles initialize_bubble',
24                                         ! initial conditions (with warm air bubble)
25
26    ug_surface                 = 0.0,    ! u-comp of geostrophic wind at surface
27    surface_pressure           = 1015.4, ! surface pressure
28
29    pt_surface                 = 297.9,            ! temperature at surface
30    pt_vertical_gradient       = 0.0, 0.585,       ! vertical gradient of temperature
31    pt_vertical_gradient_level = 0.0, 740.0,       ! height level of temp gradients
32
33    q_surface                  = 0.016,                         ! mixing ratio at surface
34    q_vertical_gradient        = -2.97E-4, -4.52E-4, -8.1E-5,   ! gradient for mix. ratio
35    q_vertical_gradient_level  = 0.0, 740.0, 3260.0,            ! height lev. for gradients
36
37    humidity                   = .TRUE.,     ! prog. equation for total water mixing ratio
38
39!
40!-- numerics
41!-------------------------------------------------------------------------------
42    fft_method                 = 'temperton-algorithm',   ! build-in fft method
43
44/ ! end of initialization parameter namelist
45
46
47!-------------------------------------------------------------------------------
48!-- RUNTIME PARAMETER NAMELIST
49!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/d3par
50!-------------------------------------------------------------------------------
51&runtime_parameters
52!
53!-- run steering
54!-------------------------------------------------------------------------------
55    end_time                   = 1200.0, ! simulation time of the 3D model
56
57    create_disturbances        = .TRUE., ! randomly perturbate horiz. velocity
58    dt_disturb                 = 150.0,  ! interval for random perturbations
59    disturbance_energy_limit   = 0.01,   ! upper limit for perturbation energy
60
61    data_output_2d_on_each_pe  = .FALSE., ! don't do 2D output on each MPI rank
62
63!
64!-- data output
65!-------------------------------------------------------------------------------
66    netcdf_data_format         = 2, ! use NetCDF3
67    dt_run_control             = 0.0,    ! output interval for run control
68    dt_data_output             = 400.0,  ! output interval for general data
69    dt_dopr                    = 400.0,  ! output interval for profile data
70
71    data_output                = 'w_xy',
72                                 'w_xz',
73                                 'theta_xy',
74                                 'theta_xz',
75                                 'ql_yz',
76                                 'qr_yz',
77                                 'nr_yz',
78                                 'w_yz',
79                                 'u_yz',
80                                 'v_yz',
81
82    data_output_pr             = 'u',
83                                 'v',
84                                 'ql',
85                                 '#theta',
86                                 'w"theta"',
87                                 'w*theta*',
88                                 'wtheta',
89                                 'w*2',
90
91    section_xy                 = 2, 10,  ! grid index for 2D XY cross sections
92    section_xz                 = 20,     ! grid index for 2D XZ cross sections
93    section_yz                 = -1, 10, ! grid index for 2D YZ cross sections
94
95    averaging_interval_pr      = 100.0, ! averaging interval profile data
96    dt_averaging_input_pr      = 10.0,  ! averaging profile data sampling rate
97
98/ ! end of runtime parameter namelist
99
100
101!-------------------------------------------------------------------------------
102!-- BULK CLOUD PARAMETER NAMELIST
103!   Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/bcmpar
104!-------------------------------------------------------------------------------
105&bulk_cloud_parameters
106
107    cloud_scheme              = 'seifert_beheng', ! two-moment liquid water microphysics
108                                                  ! including autoconversion,
109                                                  ! accretion, sedimentation, precipitation
110    collision_turbulence              = .TRUE.,   ! parametize turbulence effects for collision
111    cloud_water_sedimentation         = .TRUE.,   ! enable cloud water sedimentation
112
113    call_microphysics_at_all_substeps = .TRUE.,   ! microphysics every timestep
114
115/ ! end of bulk cloud parameter namelist
Note: See TracBrowser for help on using the repository browser.