| [3683] | 1 | !------------------------------------------------------------------------------- |
|---|
| 2 | !-- INITIALIZATION PARAMETER NAMELIST |
|---|
| 3 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/inipar |
|---|
| 4 | !------------------------------------------------------------------------------- |
|---|
| 5 | &initialization_parameters |
|---|
| 6 | ! |
|---|
| 7 | !-- grid parameters |
|---|
| 8 | !------------------------------------------------------------------------------- |
|---|
| 9 | nx = 39, ! Number of gridboxes in x-direction (nx+1) |
|---|
| 10 | ny = 39, ! Number of gridboxes in y-direction (ny+1) |
|---|
| 11 | nz = 40, ! Number of gridboxes in z-direction (nz) |
|---|
| 12 | |
|---|
| 13 | dx = 50.0, ! Size of single gridbox in x-direction |
|---|
| 14 | dy = 50.0, ! Size of single gridbox in y-direction |
|---|
| 15 | dz = 50.0, ! Size of single gridbox in z-direction |
|---|
| 16 | |
|---|
| 17 | dz_stretch_level = 1225.0, ! Height (in m) where stretching starts |
|---|
| 18 | dz_stretch_factor = 1.08, ! dz(k+1) = dz(k) * dz_stretch_factor |
|---|
| 19 | ! |
|---|
| 20 | !-- initialization |
|---|
| 21 | !------------------------------------------------------------------------------- |
|---|
| 22 | initializing_actions = 'set_constant_profiles', ! initial conditions |
|---|
| 23 | loop_optimization = 'vector', ! use 'cache' or 'vector' |
|---|
| 24 | |
|---|
| 25 | ug_surface = 0.0, ! u-comp of geostrophic wind at surface |
|---|
| 26 | vg_surface = 0.0, ! v-comp of geostrophic wind at surface |
|---|
| 27 | |
|---|
| 28 | pt_surface = 300.0, ! initial surface potential temp |
|---|
| 29 | |
|---|
| 30 | pt_vertical_gradient = 0.0, |
|---|
| 31 | 1.0, ! piecewise temp gradients |
|---|
| 32 | pt_vertical_gradient_level = 0.0, |
|---|
| 33 | 800.0, ! height level of temp gradients |
|---|
| 34 | |
|---|
| 35 | |
|---|
| 36 | ! |
|---|
| 37 | !-- boundary conditions |
|---|
| 38 | !------------------------------------------------------------------------------- |
|---|
| 39 | surface_heatflux = 0.1, ! sensible heat flux at the bottom surface |
|---|
| 40 | bc_pt_b = 'neumann', ! required with surface_heatflux |
|---|
| 41 | ! |
|---|
| 42 | !-- numerics |
|---|
| 43 | !------------------------------------------------------------------------------- |
|---|
| 44 | fft_method = 'temperton-algorithm', ! build-in fft method |
|---|
| 45 | |
|---|
| 46 | / ! end of initialization parameter namelist |
|---|
| 47 | |
|---|
| 48 | !------------------------------------------------------------------------------- |
|---|
| 49 | !-- RUNTIME PARAMETER NAMELIST |
|---|
| 50 | ! Documentation: https://palm.muk.uni-hannover.de/trac/wiki/doc/app/d3par |
|---|
| 51 | !------------------------------------------------------------------------------- |
|---|
| 52 | &runtime_parameters |
|---|
| 53 | ! |
|---|
| 54 | !-- run steering |
|---|
| 55 | !------------------------------------------------------------------------------- |
|---|
| 56 | end_time = 60.0, ! simulation time of the 3D model |
|---|
| 57 | |
|---|
| 58 | create_disturbances = .TRUE., ! randomly perturbate horiz. velocity |
|---|
| 59 | dt_disturb = 150.0, ! interval for random perturbations |
|---|
| 60 | disturbance_energy_limit = 0.01, ! upper limit for perturbation energy |
|---|
| 61 | |
|---|
| 62 | data_output_2d_on_each_pe = .FALSE., ! don't do 2D output on each MPI rank |
|---|
| 63 | |
|---|
| 64 | ! |
|---|
| 65 | !-- data output |
|---|
| 66 | !------------------------------------------------------------------------------- |
|---|
| 67 | dt_run_control = 0.0, ! output interval for run control |
|---|
| 68 | |
|---|
| 69 | / ! end of runtime parameter namelist |
|---|
| 70 | |
|---|
