1 | !> @file wind_turbine_model_mod.f90 |
---|
2 | !------------------------------------------------------------------------------! |
---|
3 | ! This file is part of the PALM model system. |
---|
4 | ! |
---|
5 | ! PALM is free software: you can redistribute it and/or modify it under the |
---|
6 | ! terms of the GNU General Public License as published by the Free Software |
---|
7 | ! Foundation, either version 3 of the License, or (at your option) any later |
---|
8 | ! version. |
---|
9 | ! |
---|
10 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANYr |
---|
11 | ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
---|
12 | ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
---|
13 | ! |
---|
14 | ! You should have received a copy of the GNU General Public License along with |
---|
15 | ! PALM. If not, see <http://www.gnu.org/licenses/>. |
---|
16 | ! |
---|
17 | ! Copyright 2009-2019 Carl von Ossietzky Universitaet Oldenburg |
---|
18 | ! Copyright 1997-2020 Leibniz Universitaet Hannover |
---|
19 | !------------------------------------------------------------------------------! |
---|
20 | ! |
---|
21 | ! Current revisions: |
---|
22 | ! ----------------- |
---|
23 | ! |
---|
24 | ! |
---|
25 | ! Former revisions: |
---|
26 | ! ----------------- |
---|
27 | ! $Id: wind_turbine_model_mod.f90 4434 2020-03-03 10:02:18Z raasch $ |
---|
28 | ! added optional netcdf data input for wtm array input parameters |
---|
29 | ! |
---|
30 | ! 4426 2020-02-27 10:02:19Z oliver.maas |
---|
31 | ! define time as unlimited dimension so that no maximum number |
---|
32 | ! of time steps has to be given for wtm_data_output |
---|
33 | ! |
---|
34 | ! 4423 2020-02-25 07:17:11Z maronga |
---|
35 | ! Switched to serial output as data is aggerated before anyway. |
---|
36 | ! |
---|
37 | ! 4420 2020-02-24 14:13:56Z maronga |
---|
38 | ! Added output control for wind turbine model |
---|
39 | ! |
---|
40 | ! 4412 2020-02-19 14:53:13Z maronga |
---|
41 | ! Bugfix: corrected character length in dimension_names |
---|
42 | ! |
---|
43 | ! 4411 2020-02-18 14:28:02Z maronga |
---|
44 | ! Added output in NetCDF format using DOM (only netcdf4-parallel is supported). |
---|
45 | ! Old ASCII output is still available at the moment. |
---|
46 | ! |
---|
47 | ! 4360 2020-01-07 11:25:50Z suehring |
---|
48 | ! Introduction of wall_flags_total_0, which currently sets bits based on static |
---|
49 | ! topography information used in wall_flags_static_0 |
---|
50 | ! |
---|
51 | ! 4343 2019-12-17 12:26:12Z oliver.maas |
---|
52 | ! replaced <= by < in line 1464 to ensure that ialpha will not be |
---|
53 | ! greater than dlen |
---|
54 | ! |
---|
55 | ! 4329 2019-12-10 15:46:36Z motisi |
---|
56 | ! Renamed wall_flags_0 to wall_flags_static_0 |
---|
57 | ! |
---|
58 | ! 4326 2019-12-06 14:16:14Z oliver.maas |
---|
59 | ! changed format of turbine control output to allow for higher |
---|
60 | ! torque and power values |
---|
61 | ! |
---|
62 | ! 4182 2019-08-22 15:20:23Z scharf |
---|
63 | ! Corrected "Former revisions" section |
---|
64 | ! |
---|
65 | ! 4144 2019-08-06 09:11:47Z raasch |
---|
66 | ! relational operators .EQ., .NE., etc. replaced by ==, /=, etc. |
---|
67 | ! |
---|
68 | ! 4056 2019-06-27 13:53:16Z Giersch |
---|
69 | ! CASE DEFAULT action in wtm_actions needs to be CONTINUE. Otherwise an abort |
---|
70 | ! will happen for location values that are not implemented as CASE statements |
---|
71 | ! but are already realized in the code (e.g. pt-tendency) |
---|
72 | ! |
---|
73 | ! 3885 2019-04-11 11:29:34Z kanani |
---|
74 | ! Changes related to global restructuring of location messages and introduction |
---|
75 | ! of additional debug messages |
---|
76 | ! |
---|
77 | ! 3875 2019-04-08 17:35:12Z knoop |
---|
78 | ! Addaped wtm_tendency to fit the module actions interface |
---|
79 | ! |
---|
80 | ! 3832 2019-03-28 13:16:58Z raasch |
---|
81 | ! instrumented with openmp directives |
---|
82 | ! |
---|
83 | ! 3725 2019-02-07 10:11:02Z raasch |
---|
84 | ! unused variables removed |
---|
85 | ! |
---|
86 | ! 3685 2019-01-21 01:02:11Z knoop |
---|
87 | ! Some interface calls moved to module_interface + cleanup |
---|
88 | ! |
---|
89 | ! 3655 2019-01-07 16:51:22Z knoop |
---|
90 | ! Replace degree symbol by 'degrees' |
---|
91 | ! |
---|
92 | ! 1914 2016-05-26 14:44:07Z witha |
---|
93 | ! Initial revision |
---|
94 | ! |
---|
95 | ! |
---|
96 | ! Description: |
---|
97 | ! ------------ |
---|
98 | !> This module calculates the effect of wind turbines on the flow fields. The |
---|
99 | !> initial version contains only the advanced actuator disk with rotation method |
---|
100 | !> (ADM-R). |
---|
101 | !> The wind turbines include the tower effect, can be yawed and tilted. |
---|
102 | !> The wind turbine model includes controllers for rotational speed, pitch and |
---|
103 | !> yaw. |
---|
104 | !> Currently some specifications of the NREL 5 MW reference turbine |
---|
105 | !> are hardcoded whereas most input data comes from separate files (currently |
---|
106 | !> external, planned to be included as namelist which will be read in |
---|
107 | !> automatically). |
---|
108 | !> |
---|
109 | !> @todo Replace dz(1) appropriatly to account for grid stretching |
---|
110 | !> @todo Revise code according to PALM Coding Standard |
---|
111 | !> @todo Implement ADM and ALM turbine models |
---|
112 | !> @todo Generate header information |
---|
113 | !> @todo Implement further parameter checks and error messages |
---|
114 | !> @todo Revise and add code documentation |
---|
115 | !> @todo Output turbine parameters as timeseries |
---|
116 | !> @todo Include additional output variables |
---|
117 | !> @todo Revise smearing the forces for turbines in yaw |
---|
118 | !> @todo Revise nacelle and tower parameterization |
---|
119 | !> @todo Allow different turbine types in one simulation |
---|
120 | ! |
---|
121 | !------------------------------------------------------------------------------! |
---|
122 | MODULE wind_turbine_model_mod |
---|
123 | |
---|
124 | USE arrays_3d, & |
---|
125 | ONLY: tend, u, v, w, zu, zw |
---|
126 | |
---|
127 | USE basic_constants_and_equations_mod, & |
---|
128 | ONLY: pi |
---|
129 | |
---|
130 | USE control_parameters, & |
---|
131 | ONLY: coupling_char, & |
---|
132 | debug_output, & |
---|
133 | dt_3d, dz, end_time, message_string, time_since_reference_point,& |
---|
134 | wind_turbine, initializing_actions, origin_date_time |
---|
135 | |
---|
136 | USE cpulog, & |
---|
137 | ONLY: cpu_log, log_point_s |
---|
138 | |
---|
139 | USE data_output_module |
---|
140 | |
---|
141 | USE grid_variables, & |
---|
142 | ONLY: ddx, dx, ddy, dy |
---|
143 | |
---|
144 | USE indices, & |
---|
145 | ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, & |
---|
146 | nzb, nzt, wall_flags_total_0 |
---|
147 | |
---|
148 | USE kinds |
---|
149 | |
---|
150 | USE netcdf_data_input_mod, & |
---|
151 | ONLY: check_existence, & |
---|
152 | close_input_file, & |
---|
153 | get_variable, & |
---|
154 | input_pids_wtm, & |
---|
155 | inquire_num_variables, & |
---|
156 | inquire_variable_names, & |
---|
157 | input_file_wtm, & |
---|
158 | num_var_pids, & |
---|
159 | open_read_file, & |
---|
160 | pids_id, & |
---|
161 | vars_pids |
---|
162 | |
---|
163 | USE pegrid |
---|
164 | |
---|
165 | |
---|
166 | IMPLICIT NONE |
---|
167 | |
---|
168 | PRIVATE |
---|
169 | |
---|
170 | |
---|
171 | |
---|
172 | CHARACTER(LEN=100) :: variable_name !< name of output variable |
---|
173 | CHARACTER(LEN=30) :: nc_filename |
---|
174 | |
---|
175 | ! |
---|
176 | !-- Variables specified in the namelist wind_turbine_par |
---|
177 | |
---|
178 | INTEGER(iwp) :: nairfoils = 8 !< number of airfoils of the used turbine model (for ADM-R and ALM) |
---|
179 | INTEGER(iwp) :: nturbines = 1 !< number of turbines |
---|
180 | |
---|
181 | |
---|
182 | |
---|
183 | REAL(wp), DIMENSION(:), POINTER :: output_values_1d_pointer !< pointer for 2d output array |
---|
184 | REAL(wp), POINTER :: output_values_0d_pointer !< pointer for 2d output array |
---|
185 | REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: output_values_1d_target !< pointer for 2d output array |
---|
186 | REAL(wp), TARGET :: output_values_0d_target !< pointer for 2d output array |
---|
187 | |
---|
188 | LOGICAL :: pitch_control = .FALSE. !< switch for use of pitch controller |
---|
189 | LOGICAL :: speed_control = .FALSE. !< switch for use of speed controller |
---|
190 | LOGICAL :: yaw_control = .FALSE. !< switch for use of yaw controller |
---|
191 | LOGICAL :: tl_cor = .FALSE. !< switch for use of tip loss correct. |
---|
192 | |
---|
193 | LOGICAL :: initial_write_coordinates = .FALSE. |
---|
194 | |
---|
195 | REAL(wp) :: dt_data_output_wtm = 0.0_wp !< data output interval |
---|
196 | REAL(wp) :: time_wtm = 0.0_wp !< time since last data output |
---|
197 | |
---|
198 | |
---|
199 | REAL(wp) :: segment_length = 1.0_wp !< length of the segments, the rotor area is divided into |
---|
200 | !< (in tangential direction, as factor of MIN(dx,dy,dz)) |
---|
201 | REAL(wp) :: segment_width = 0.5_wp !< width of the segments, the rotor area is divided into |
---|
202 | !< (in radial direction, as factor of MIN(dx,dy,dz)) |
---|
203 | REAL(wp) :: time_turbine_on = 0.0_wp !< time at which turbines are started |
---|
204 | REAL(wp) :: tilt = 0.0_wp !< vertical tilt of the rotor [degree] ( positive = backwards ) |
---|
205 | |
---|
206 | |
---|
207 | REAL(wp), DIMENSION(1:100) :: dtow = 0.0_wp !< tower diameter [m] |
---|
208 | REAL(wp), DIMENSION(1:100), TARGET :: omega_rot = 0.9_wp !< inital or constant rotor speed [rad/s] |
---|
209 | REAL(wp), DIMENSION(1:100) :: phi_yaw = 0.0_wp !< yaw angle [degree] ( clockwise, 0 = facing west ) |
---|
210 | REAL(wp), DIMENSION(1:100) :: pitch_add = 0.0_wp !< constant pitch angle |
---|
211 | REAL(wp), DIMENSION(1:100) :: rcx = 9999999.9_wp !< position of hub in x-direction |
---|
212 | REAL(wp), DIMENSION(1:100) :: rcy = 9999999.9_wp !< position of hub in y-direction |
---|
213 | REAL(wp), DIMENSION(1:100) :: rcz = 9999999.9_wp !< position of hub in z-direction |
---|
214 | REAL(wp), DIMENSION(1:100) :: rnac = 0.0_wp !< nacelle diameter [m] |
---|
215 | REAL(wp), DIMENSION(1:100) :: rr = 63.0_wp !< rotor radius [m] |
---|
216 | ! REAL(wp), DIMENSION(1:100) :: turb_cd_nacelle = 0.85_wp !< drag coefficient for nacelle |
---|
217 | REAL(wp), DIMENSION(1:100) :: turb_cd_tower = 1.2_wp !< drag coefficient for tower |
---|
218 | |
---|
219 | ! |
---|
220 | !-- Variables specified in the namelist for speed controller |
---|
221 | !-- Default values are from the NREL 5MW research turbine (Jonkman, 2008) |
---|
222 | |
---|
223 | REAL(wp) :: rated_power = 5296610.0_wp !< rated turbine power [W] |
---|
224 | REAL(wp) :: gear_ratio = 97.0_wp !< Gear ratio from rotor to generator |
---|
225 | REAL(wp) :: inertia_rot = 34784179.0_wp !< Inertia of the rotor [kg*m2] |
---|
226 | REAL(wp) :: inertia_gen = 534.116_wp !< Inertia of the generator [kg*m2] |
---|
227 | REAL(wp) :: gen_eff = 0.944_wp !< Electric efficiency of the generator |
---|
228 | REAL(wp) :: gear_eff = 1.0_wp !< Loss between rotor and generator |
---|
229 | REAL(wp) :: air_dens = 1.225_wp !< Air density to convert to W [kg/m3] |
---|
230 | REAL(wp) :: rated_genspeed = 121.6805_wp !< Rated generator speed [rad/s] |
---|
231 | REAL(wp) :: max_torque_gen = 47402.91_wp !< Maximum of the generator torque [Nm] |
---|
232 | REAL(wp) :: slope2 = 2.332287_wp !< Slope constant for region 2 |
---|
233 | REAL(wp) :: min_reg2 = 91.21091_wp !< Lower generator speed boundary of region 2 [rad/s] |
---|
234 | REAL(wp) :: min_reg15 = 70.16224_wp !< Lower generator speed boundary of region 1.5 [rad/s] |
---|
235 | REAL(wp) :: max_trq_rate = 15000.0_wp !< Max generator torque increase [Nm/s] |
---|
236 | REAL(wp) :: pitch_rate = 8.0_wp !< Max pitch rate [degree/s] |
---|
237 | |
---|
238 | |
---|
239 | ! |
---|
240 | !-- Variables specified in the namelist for yaw control |
---|
241 | |
---|
242 | REAL(wp) :: yaw_speed = 0.005236_wp !< speed of the yaw actuator [rad/s] |
---|
243 | REAL(wp) :: max_miss = 0.08726_wp !< maximum tolerated yaw missalignment [rad] |
---|
244 | REAL(wp) :: min_miss = 0.008726_wp !< minimum yaw missalignment for which the actuator stops [rad] |
---|
245 | |
---|
246 | ! |
---|
247 | !-- Set flag for output files TURBINE_PARAMETERS |
---|
248 | TYPE file_status |
---|
249 | LOGICAL :: opened, opened_before |
---|
250 | END TYPE file_status |
---|
251 | |
---|
252 | TYPE(file_status), DIMENSION(500) :: openfile_turb_mod = & |
---|
253 | file_status(.FALSE.,.FALSE.) |
---|
254 | |
---|
255 | ! |
---|
256 | !-- Variables for initialization of the turbine model |
---|
257 | |
---|
258 | INTEGER(iwp) :: inot !< turbine loop index (turbine id) |
---|
259 | INTEGER(iwp) :: nsegs_max !< maximum number of segments (all turbines, required for allocation of arrays) |
---|
260 | INTEGER(iwp) :: nrings_max !< maximum number of rings (all turbines, required for allocation of arrays) |
---|
261 | INTEGER(iwp) :: ring !< ring loop index (ring number) |
---|
262 | INTEGER(iwp) :: upper_end !< |
---|
263 | |
---|
264 | INTEGER(iwp), DIMENSION(1) :: lct !< |
---|
265 | |
---|
266 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: i_hub !< index belonging to x-position of the turbine |
---|
267 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: i_smear !< index defining the area for the smearing of the forces (x-direction) |
---|
268 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: j_hub !< index belonging to y-position of the turbine |
---|
269 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: j_smear !< index defining the area for the smearing of the forces (y-direction) |
---|
270 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_hub !< index belonging to hub height |
---|
271 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_smear !< index defining the area for the smearing of the forces (z-direction) |
---|
272 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nrings !< number of rings per turbine |
---|
273 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nsegs_total !< total number of segments per turbine |
---|
274 | |
---|
275 | INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nsegs !< number of segments per ring and turbine |
---|
276 | |
---|
277 | ! |
---|
278 | !- parameters for the smearing from the rotor to the cartesian grid |
---|
279 | REAL(wp) :: pol_a !< parameter for the polynomial smearing fct |
---|
280 | REAL(wp) :: pol_b !< parameter for the polynomial smearing fct |
---|
281 | REAL(wp) :: delta_t_factor !< |
---|
282 | REAL(wp) :: eps_factor !< |
---|
283 | REAL(wp) :: eps_min !< |
---|
284 | REAL(wp) :: eps_min2 !< |
---|
285 | |
---|
286 | ! |
---|
287 | !-- Variables for the calculation of lift and drag coefficients |
---|
288 | REAL(wp), DIMENSION(:), ALLOCATABLE :: ard !< |
---|
289 | REAL(wp), DIMENSION(:), ALLOCATABLE :: crd !< |
---|
290 | REAL(wp), DIMENSION(:), ALLOCATABLE :: delta_r !< radial segment length |
---|
291 | REAL(wp), DIMENSION(:), ALLOCATABLE :: lrd !< |
---|
292 | |
---|
293 | REAL(wp) :: accu_cl_cd_tab = 0.1_wp !< Accuracy of the interpolation of |
---|
294 | !< the lift and drag coeff [deg] |
---|
295 | |
---|
296 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cd_tab !< table of the blade drag coefficient |
---|
297 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cl_tab !< table of the blade lift coefficient |
---|
298 | |
---|
299 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: nac_cd_surf !< 3d field of the tower drag coefficient |
---|
300 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tow_cd_surf !< 3d field of the nacelle drag coefficient |
---|
301 | |
---|
302 | ! |
---|
303 | !-- Variables for the calculation of the forces |
---|
304 | |
---|
305 | REAL(wp) :: cur_r !< |
---|
306 | REAL(wp) :: phi_rotor !< |
---|
307 | REAL(wp) :: pre_factor !< |
---|
308 | REAL(wp) :: torque_seg !< |
---|
309 | REAL(wp) :: u_int_l !< |
---|
310 | REAL(wp) :: u_int_u !< |
---|
311 | REAL(wp) :: u_rot !< |
---|
312 | REAL(wp) :: v_int_l !< |
---|
313 | REAL(wp) :: v_int_u !< |
---|
314 | REAL(wp) :: w_int_l !< |
---|
315 | REAL(wp) :: w_int_u !< |
---|
316 | !$OMP THREADPRIVATE (cur_r, phi_rotor, pre_factor, torque_seg, u_int_l, u_int_u, u_rot, & |
---|
317 | !$OMP& v_int_l, v_int_u, w_int_l, w_int_u) |
---|
318 | ! |
---|
319 | !- Tendencies from the nacelle and tower thrust |
---|
320 | REAL(wp) :: tend_nac_x = 0.0_wp !< |
---|
321 | REAL(wp) :: tend_tow_x = 0.0_wp !< |
---|
322 | REAL(wp) :: tend_nac_y = 0.0_wp !< |
---|
323 | REAL(wp) :: tend_tow_y = 0.0_wp !< |
---|
324 | !$OMP THREADPRIVATE (tend_nac_x, tend_tow_x, tend_nac_y, tend_tow_y) |
---|
325 | |
---|
326 | REAL(wp), DIMENSION(:), ALLOCATABLE :: alpha_attack !< |
---|
327 | REAL(wp), DIMENSION(:), ALLOCATABLE :: chord !< |
---|
328 | REAL(wp), DIMENSION(:), ALLOCATABLE :: phi_rel !< |
---|
329 | REAL(wp), DIMENSION(:), ALLOCATABLE :: torque_total !< |
---|
330 | REAL(wp), DIMENSION(:), ALLOCATABLE :: thrust_rotor !< |
---|
331 | REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cl !< |
---|
332 | REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cd !< |
---|
333 | REAL(wp), DIMENSION(:), ALLOCATABLE :: vrel !< |
---|
334 | REAL(wp), DIMENSION(:), ALLOCATABLE :: vtheta !< |
---|
335 | |
---|
336 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rbx, rby, rbz !< coordinates of the blade elements |
---|
337 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rotx, roty, rotz !< normal vectors to the rotor coordinates |
---|
338 | |
---|
339 | ! |
---|
340 | !- Fields for the interpolation of velocities on the rotor grid |
---|
341 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_int !< |
---|
342 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: u_int_1_l !< |
---|
343 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_int !< |
---|
344 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: v_int_1_l !< |
---|
345 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_int !< |
---|
346 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: w_int_1_l !< |
---|
347 | |
---|
348 | ! |
---|
349 | !- rotor tendencies on the segments |
---|
350 | REAL(wp), DIMENSION(:), ALLOCATABLE :: thrust_seg !< |
---|
351 | REAL(wp), DIMENSION(:), ALLOCATABLE :: torque_seg_y !< |
---|
352 | REAL(wp), DIMENSION(:), ALLOCATABLE :: torque_seg_z !< |
---|
353 | |
---|
354 | ! |
---|
355 | !- rotor tendencies on the rings |
---|
356 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: thrust_ring !< |
---|
357 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: torque_ring_y !< |
---|
358 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: torque_ring_z !< |
---|
359 | |
---|
360 | ! |
---|
361 | !- rotor tendencies on rotor grids for all turbines |
---|
362 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: thrust !< |
---|
363 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: torque_y !< |
---|
364 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: torque_z !< |
---|
365 | |
---|
366 | ! |
---|
367 | !- rotor tendencies on coordinate grid |
---|
368 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rot_tend_x !< |
---|
369 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rot_tend_y !< |
---|
370 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: rot_tend_z !< |
---|
371 | ! |
---|
372 | !- variables for the rotation of the rotor coordinates |
---|
373 | REAL(wp), DIMENSION(1:100,1:3,1:3) :: rot_coord_trans !< matrix for rotation of rotor coordinates |
---|
374 | |
---|
375 | REAL(wp), DIMENSION(1:3) :: rot_eigen_rad !< |
---|
376 | REAL(wp), DIMENSION(1:3) :: rot_eigen_azi !< |
---|
377 | REAL(wp), DIMENSION(1:3) :: rot_eigen_nor !< |
---|
378 | REAL(wp), DIMENSION(1:3) :: re !< |
---|
379 | REAL(wp), DIMENSION(1:3) :: rea !< |
---|
380 | REAL(wp), DIMENSION(1:3) :: ren !< |
---|
381 | REAL(wp), DIMENSION(1:3) :: rote !< |
---|
382 | REAL(wp), DIMENSION(1:3) :: rota !< |
---|
383 | REAL(wp), DIMENSION(1:3) :: rotn !< |
---|
384 | |
---|
385 | ! |
---|
386 | !-- Fixed variables for the speed controller |
---|
387 | |
---|
388 | LOGICAL :: start_up = .TRUE. !< |
---|
389 | |
---|
390 | REAL(wp) :: Fcorner !< corner freq for the controller low pass filter |
---|
391 | REAL(wp) :: min_reg25 !< min region 2.5 |
---|
392 | REAL(wp) :: om_rate !< rotor speed change |
---|
393 | REAL(wp) :: slope15 !< slope in region 1.5 |
---|
394 | REAL(wp) :: slope25 !< slope in region 2.5 |
---|
395 | REAL(wp) :: trq_rate !< torque change |
---|
396 | REAL(wp) :: vs_sysp !< |
---|
397 | REAL(wp) :: lp_coeff !< coeff for the controller low pass filter |
---|
398 | |
---|
399 | REAL(wp), DIMENSION(100) :: omega_rot_l = 0.0_wp !< local rot speed [rad/s] |
---|
400 | |
---|
401 | ! |
---|
402 | !-- Fixed variables for the yaw controller |
---|
403 | |
---|
404 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: yawdir !< direction to yaw |
---|
405 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: phi_yaw_l !< local (cpu) yaw angle |
---|
406 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: wd30_l !< local (cpu) long running avg of the wd |
---|
407 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: wd2_l !< local (cpu) short running avg of the wd |
---|
408 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: wdir !< wind direction at hub |
---|
409 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: u_inflow !< wind speed at hub |
---|
410 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: wdir_l !< |
---|
411 | REAL(wp), DIMENSION(:) , ALLOCATABLE :: u_inflow_l !< |
---|
412 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: wd30 !< |
---|
413 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: wd2 !< |
---|
414 | LOGICAL, DIMENSION(1:100) :: doyaw = .FALSE. !< |
---|
415 | INTEGER(iwp) :: WDLON !< |
---|
416 | INTEGER(iwp) :: WDSHO !< |
---|
417 | |
---|
418 | ! |
---|
419 | !-- Variables that have to be saved in the binary file for restarts |
---|
420 | REAL(wp), DIMENSION(1:100) :: pitch_add_old = 0.0_wp !< old constant pitch angle |
---|
421 | REAL(wp), DIMENSION(1:100) :: omega_gen = 0.0_wp !< curr. generator speed |
---|
422 | REAL(wp), DIMENSION(1:100) :: omega_gen_f = 0.0_wp !< filtered generator speed |
---|
423 | REAL(wp), DIMENSION(1:100) :: omega_gen_old = 0.0_wp !< last generator speed |
---|
424 | REAL(wp), DIMENSION(1:100) :: omega_gen_f_old = 0.0_wp !< last filtered generator speed |
---|
425 | REAL(wp), DIMENSION(1:100) :: torque_gen = 0.0_wp !< generator torque |
---|
426 | REAL(wp), DIMENSION(1:100) :: torque_gen_old = 0.0_wp !< last generator torque |
---|
427 | |
---|
428 | |
---|
429 | SAVE |
---|
430 | |
---|
431 | |
---|
432 | INTERFACE wtm_parin |
---|
433 | MODULE PROCEDURE wtm_parin |
---|
434 | END INTERFACE wtm_parin |
---|
435 | |
---|
436 | INTERFACE wtm_check_parameters |
---|
437 | MODULE PROCEDURE wtm_check_parameters |
---|
438 | END INTERFACE wtm_check_parameters |
---|
439 | |
---|
440 | INTERFACE wtm_data_output |
---|
441 | MODULE PROCEDURE wtm_data_output |
---|
442 | END INTERFACE wtm_data_output |
---|
443 | |
---|
444 | INTERFACE wtm_init_arrays |
---|
445 | MODULE PROCEDURE wtm_init_arrays |
---|
446 | END INTERFACE wtm_init_arrays |
---|
447 | |
---|
448 | INTERFACE wtm_init |
---|
449 | MODULE PROCEDURE wtm_init |
---|
450 | END INTERFACE wtm_init |
---|
451 | |
---|
452 | INTERFACE wtm_init_output |
---|
453 | MODULE PROCEDURE wtm_init_output |
---|
454 | END INTERFACE wtm_init_output |
---|
455 | |
---|
456 | INTERFACE wtm_actions |
---|
457 | MODULE PROCEDURE wtm_actions |
---|
458 | MODULE PROCEDURE wtm_actions_ij |
---|
459 | END INTERFACE wtm_actions |
---|
460 | |
---|
461 | INTERFACE wtm_rrd_global |
---|
462 | MODULE PROCEDURE wtm_rrd_global |
---|
463 | END INTERFACE wtm_rrd_global |
---|
464 | |
---|
465 | INTERFACE wtm_wrd_global |
---|
466 | MODULE PROCEDURE wtm_wrd_global |
---|
467 | END INTERFACE wtm_wrd_global |
---|
468 | |
---|
469 | |
---|
470 | PUBLIC & |
---|
471 | dt_data_output_wtm, & |
---|
472 | time_wtm, & |
---|
473 | wind_turbine |
---|
474 | |
---|
475 | PUBLIC & |
---|
476 | wtm_parin, & |
---|
477 | wtm_check_parameters, & |
---|
478 | wtm_data_output, & |
---|
479 | wtm_init_arrays, & |
---|
480 | wtm_init_output, & |
---|
481 | wtm_init, & |
---|
482 | wtm_actions, & |
---|
483 | wtm_rrd_global, & |
---|
484 | wtm_wrd_global |
---|
485 | |
---|
486 | |
---|
487 | CONTAINS |
---|
488 | |
---|
489 | |
---|
490 | !------------------------------------------------------------------------------! |
---|
491 | ! Description: |
---|
492 | ! ------------ |
---|
493 | !> Parin for &wind_turbine_par for wind turbine model |
---|
494 | !------------------------------------------------------------------------------! |
---|
495 | SUBROUTINE wtm_parin |
---|
496 | |
---|
497 | IMPLICIT NONE |
---|
498 | |
---|
499 | CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file |
---|
500 | |
---|
501 | NAMELIST /wind_turbine_parameters/ & |
---|
502 | air_dens, dtow, dt_data_output_wtm, gear_eff,& |
---|
503 | gear_ratio, & |
---|
504 | gen_eff, inertia_gen, inertia_rot, max_miss, & |
---|
505 | max_torque_gen, max_trq_rate, min_miss, & |
---|
506 | min_reg15, min_reg2, nairfoils, nturbines, & |
---|
507 | omega_rot, phi_yaw, pitch_add, pitch_control,& |
---|
508 | rated_genspeed, rated_power, rcx, rcy, rcz, & |
---|
509 | rnac, rr, segment_length, segment_width, & |
---|
510 | slope2, speed_control, tilt, time_turbine_on,& |
---|
511 | turb_cd_tower, pitch_rate, & |
---|
512 | yaw_control, yaw_speed, tl_cor |
---|
513 | ! , turb_cd_nacelle |
---|
514 | ! |
---|
515 | !-- Try to find wind turbine model package |
---|
516 | REWIND ( 11 ) |
---|
517 | line = ' ' |
---|
518 | DO WHILE ( INDEX( line, '&wind_turbine_parameters' ) == 0 ) |
---|
519 | READ ( 11, '(A)', END=12 ) line |
---|
520 | ENDDO |
---|
521 | BACKSPACE ( 11 ) |
---|
522 | |
---|
523 | ! |
---|
524 | !-- Read user-defined namelist |
---|
525 | READ ( 11, wind_turbine_parameters, ERR = 10, END = 12 ) |
---|
526 | ! |
---|
527 | !-- Set flag that indicates that the wind turbine model is switched on |
---|
528 | wind_turbine = .TRUE. |
---|
529 | |
---|
530 | GOTO 12 |
---|
531 | |
---|
532 | 10 BACKSPACE( 11 ) |
---|
533 | READ( 11 , '(A)') line |
---|
534 | CALL parin_fail_message( 'wind_turbine_parameters', line ) |
---|
535 | |
---|
536 | 12 CONTINUE ! TBD Change from continue, mit ierrn machen |
---|
537 | |
---|
538 | END SUBROUTINE wtm_parin |
---|
539 | |
---|
540 | |
---|
541 | !------------------------------------------------------------------------------! |
---|
542 | ! Description: |
---|
543 | ! ------------ |
---|
544 | !> This routine writes the respective restart data. |
---|
545 | !------------------------------------------------------------------------------! |
---|
546 | SUBROUTINE wtm_wrd_global |
---|
547 | |
---|
548 | |
---|
549 | IMPLICIT NONE |
---|
550 | |
---|
551 | |
---|
552 | CALL wrd_write_string( 'omega_gen' ) |
---|
553 | WRITE ( 14 ) omega_gen |
---|
554 | |
---|
555 | CALL wrd_write_string( 'omega_gen_f' ) |
---|
556 | WRITE ( 14 ) omega_gen_f |
---|
557 | |
---|
558 | CALL wrd_write_string( 'omega_gen_f_old' ) |
---|
559 | WRITE ( 14 ) omega_gen_f_old |
---|
560 | |
---|
561 | CALL wrd_write_string( 'omega_gen_old' ) |
---|
562 | WRITE ( 14 ) omega_gen_old |
---|
563 | |
---|
564 | CALL wrd_write_string( 'omega_rot' ) |
---|
565 | WRITE ( 14 ) omega_rot |
---|
566 | |
---|
567 | CALL wrd_write_string( 'phi_yaw' ) |
---|
568 | WRITE ( 14 ) phi_yaw |
---|
569 | |
---|
570 | CALL wrd_write_string( 'pitch_add' ) |
---|
571 | WRITE ( 14 ) pitch_add |
---|
572 | |
---|
573 | CALL wrd_write_string( 'pitch_add_old' ) |
---|
574 | WRITE ( 14 ) pitch_add_old |
---|
575 | |
---|
576 | CALL wrd_write_string( 'torque_gen' ) |
---|
577 | WRITE ( 14 ) torque_gen |
---|
578 | |
---|
579 | CALL wrd_write_string( 'torque_gen_old' ) |
---|
580 | WRITE ( 14 ) torque_gen_old |
---|
581 | |
---|
582 | |
---|
583 | END SUBROUTINE wtm_wrd_global |
---|
584 | |
---|
585 | |
---|
586 | !------------------------------------------------------------------------------! |
---|
587 | ! Description: |
---|
588 | ! ------------ |
---|
589 | !> This routine reads the respective restart data. |
---|
590 | !------------------------------------------------------------------------------! |
---|
591 | SUBROUTINE wtm_rrd_global( found ) |
---|
592 | |
---|
593 | |
---|
594 | USE control_parameters, & |
---|
595 | ONLY: length, restart_string |
---|
596 | |
---|
597 | |
---|
598 | IMPLICIT NONE |
---|
599 | |
---|
600 | LOGICAL, INTENT(OUT) :: found |
---|
601 | |
---|
602 | |
---|
603 | found = .TRUE. |
---|
604 | |
---|
605 | |
---|
606 | SELECT CASE ( restart_string(1:length) ) |
---|
607 | |
---|
608 | CASE ( 'omega_gen' ) |
---|
609 | READ ( 13 ) omega_gen |
---|
610 | CASE ( 'omega_gen_f' ) |
---|
611 | READ ( 13 ) omega_gen_f |
---|
612 | CASE ( 'omega_gen_f_old' ) |
---|
613 | READ ( 13 ) omega_gen_f_old |
---|
614 | CASE ( 'omega_gen_old' ) |
---|
615 | READ ( 13 ) omega_gen_old |
---|
616 | CASE ( 'omega_rot' ) |
---|
617 | READ ( 13 ) omega_rot |
---|
618 | CASE ( 'phi_yaw' ) |
---|
619 | READ ( 13 ) phi_yaw |
---|
620 | CASE ( 'pitch_add' ) |
---|
621 | READ ( 13 ) pitch_add |
---|
622 | CASE ( 'pitch_add_old' ) |
---|
623 | READ ( 13 ) pitch_add_old |
---|
624 | CASE ( 'torque_gen' ) |
---|
625 | READ ( 13 ) torque_gen |
---|
626 | CASE ( 'torque_gen_old' ) |
---|
627 | READ ( 13 ) torque_gen_old |
---|
628 | |
---|
629 | CASE DEFAULT |
---|
630 | |
---|
631 | found = .FALSE. |
---|
632 | |
---|
633 | END SELECT |
---|
634 | |
---|
635 | |
---|
636 | END SUBROUTINE wtm_rrd_global |
---|
637 | |
---|
638 | |
---|
639 | !------------------------------------------------------------------------------! |
---|
640 | ! Description: |
---|
641 | ! ------------ |
---|
642 | !> Check namelist parameter |
---|
643 | !------------------------------------------------------------------------------! |
---|
644 | SUBROUTINE wtm_check_parameters |
---|
645 | |
---|
646 | |
---|
647 | IMPLICIT NONE |
---|
648 | |
---|
649 | IF ( .NOT. input_pids_wtm ) THEN |
---|
650 | IF ( ( .NOT.speed_control ) .AND. pitch_control ) THEN |
---|
651 | message_string = 'pitch_control = .TRUE. requires '// & |
---|
652 | 'speed_control = .TRUE.' |
---|
653 | CALL message( 'wtm_check_parameters', 'PA0461', 1, 2, 0, 6, 0 ) |
---|
654 | ENDIF |
---|
655 | |
---|
656 | IF ( ANY( omega_rot(1:nturbines) < 0.0 ) ) THEN |
---|
657 | message_string = 'omega_rot < 0.0, Please set omega_rot to ' // & |
---|
658 | 'a value equal or larger than zero' |
---|
659 | CALL message( 'wtm_check_parameters', 'PA0462', 1, 2, 0, 6, 0 ) |
---|
660 | ENDIF |
---|
661 | |
---|
662 | |
---|
663 | IF ( ANY( rcx(1:nturbines) == 9999999.9_wp ) .OR. & |
---|
664 | ANY( rcy(1:nturbines) == 9999999.9_wp ) .OR. & |
---|
665 | ANY( rcz(1:nturbines) == 9999999.9_wp ) ) THEN |
---|
666 | |
---|
667 | message_string = 'rcx, rcy, rcz ' // & |
---|
668 | 'have to be given for each turbine.' |
---|
669 | CALL message( 'wtm_check_parameters', 'PA0463', 1, 2, 0, 6, 0 ) |
---|
670 | ENDIF |
---|
671 | ENDIF |
---|
672 | |
---|
673 | END SUBROUTINE wtm_check_parameters |
---|
674 | ! |
---|
675 | |
---|
676 | !------------------------------------------------------------------------------! |
---|
677 | ! Description: |
---|
678 | ! ------------ |
---|
679 | !> Allocate wind turbine model arrays |
---|
680 | !------------------------------------------------------------------------------! |
---|
681 | SUBROUTINE wtm_init_arrays |
---|
682 | |
---|
683 | IMPLICIT NONE |
---|
684 | |
---|
685 | REAL(wp) :: delta_r_factor !< |
---|
686 | REAL(wp) :: delta_r_init !< |
---|
687 | |
---|
688 | ! |
---|
689 | ! Read wtm input file (netcdf) if it exists |
---|
690 | IF ( input_pids_wtm ) THEN |
---|
691 | |
---|
692 | ! |
---|
693 | !-- Open the wtm input file |
---|
694 | #if defined( __netcdf ) |
---|
695 | CALL open_read_file( TRIM( input_file_wtm ) // & |
---|
696 | TRIM( coupling_char ), pids_id ) |
---|
697 | |
---|
698 | CALL inquire_num_variables( pids_id, num_var_pids ) |
---|
699 | |
---|
700 | ! |
---|
701 | !-- Allocate memory to store variable names and read them |
---|
702 | ALLOCATE( vars_pids(1:num_var_pids) ) |
---|
703 | CALL inquire_variable_names( pids_id, vars_pids ) |
---|
704 | |
---|
705 | ! |
---|
706 | !-- Input of all wtm parameters |
---|
707 | IF ( check_existence( vars_pids, 'dtow' ) ) THEN |
---|
708 | CALL get_variable( pids_id, 'dtow', dtow(1:nturbines)) |
---|
709 | ENDIF |
---|
710 | |
---|
711 | IF ( check_existence( vars_pids, 'omega_rot' ) ) THEN |
---|
712 | CALL get_variable( pids_id, 'omega_rot', omega_rot(1:nturbines)) |
---|
713 | ENDIF |
---|
714 | |
---|
715 | IF ( check_existence( vars_pids, 'pitch_add' ) ) THEN |
---|
716 | CALL get_variable( pids_id, 'pitch_add', pitch_add(1:nturbines)) |
---|
717 | ENDIF |
---|
718 | |
---|
719 | IF ( check_existence( vars_pids, 'phi_yaw' ) ) THEN |
---|
720 | CALL get_variable( pids_id, 'phi_yaw', phi_yaw(1:nturbines)) |
---|
721 | ENDIF |
---|
722 | |
---|
723 | IF ( check_existence( vars_pids, 'rcx' ) ) THEN |
---|
724 | CALL get_variable( pids_id, 'rcx', rcx(1:nturbines)) |
---|
725 | ENDIF |
---|
726 | |
---|
727 | IF ( check_existence( vars_pids, 'rcy' ) ) THEN |
---|
728 | CALL get_variable( pids_id, 'rcy', rcy(1:nturbines)) |
---|
729 | ENDIF |
---|
730 | |
---|
731 | IF ( check_existence( vars_pids, 'rcz' ) ) THEN |
---|
732 | CALL get_variable( pids_id, 'rcz', rcz(1:nturbines)) |
---|
733 | ENDIF |
---|
734 | |
---|
735 | IF ( check_existence( vars_pids, 'rnac' ) ) THEN |
---|
736 | CALL get_variable( pids_id, 'rnac', rnac(1:nturbines)) |
---|
737 | ENDIF |
---|
738 | |
---|
739 | IF ( check_existence( vars_pids, 'rr' ) ) THEN |
---|
740 | CALL get_variable( pids_id, 'rr', rr(1:nturbines)) |
---|
741 | ENDIF |
---|
742 | ! |
---|
743 | ! IF ( check_existence( vars_pids, 'turb_cd_nacelle' ) ) THEN |
---|
744 | ! CALL get_variable( pids_id, 'turb_cd_nacelle', turb_cd_nacelle(1:nturbines)) |
---|
745 | ! ENDIF |
---|
746 | |
---|
747 | IF ( check_existence( vars_pids, 'turb_cd_tower' ) ) THEN |
---|
748 | CALL get_variable( pids_id, 'turb_cd_tower', turb_cd_tower(1:nturbines)) |
---|
749 | ENDIF |
---|
750 | ! |
---|
751 | !-- Close wtm input file |
---|
752 | CALL close_input_file( pids_id ) |
---|
753 | |
---|
754 | ENDIF |
---|
755 | #endif |
---|
756 | |
---|
757 | ! |
---|
758 | !-- To be able to allocate arrays with dimension of rotor rings and segments, |
---|
759 | !-- the maximum possible numbers of rings and segments have to be calculated: |
---|
760 | |
---|
761 | ALLOCATE( nrings(1:nturbines) ) |
---|
762 | ALLOCATE( delta_r(1:nturbines) ) |
---|
763 | |
---|
764 | nrings(:) = 0 |
---|
765 | delta_r(:) = 0.0_wp |
---|
766 | |
---|
767 | ! |
---|
768 | !-- Thickness (radial) of each ring and length (tangential) of each segment: |
---|
769 | delta_r_factor = segment_width |
---|
770 | delta_t_factor = segment_length |
---|
771 | delta_r_init = delta_r_factor * MIN( dx, dy, dz(1)) |
---|
772 | |
---|
773 | DO inot = 1, nturbines |
---|
774 | ! |
---|
775 | !-- Determine number of rings: |
---|
776 | nrings(inot) = NINT( rr(inot) / delta_r_init ) |
---|
777 | |
---|
778 | delta_r(inot) = rr(inot) / nrings(inot) |
---|
779 | |
---|
780 | ENDDO |
---|
781 | |
---|
782 | nrings_max = MAXVAL(nrings) |
---|
783 | |
---|
784 | ALLOCATE( nsegs(1:nrings_max,1:nturbines) ) |
---|
785 | ALLOCATE( nsegs_total(1:nturbines) ) |
---|
786 | |
---|
787 | nsegs(:,:) = 0 |
---|
788 | nsegs_total(:) = 0 |
---|
789 | |
---|
790 | |
---|
791 | DO inot = 1, nturbines |
---|
792 | DO ring = 1, nrings(inot) |
---|
793 | ! |
---|
794 | !-- Determine number of segments for each ring: |
---|
795 | nsegs(ring,inot) = MAX( 8, CEILING( delta_r_factor * pi * & |
---|
796 | ( 2.0_wp * ring - 1.0_wp ) / & |
---|
797 | delta_t_factor ) ) |
---|
798 | ENDDO |
---|
799 | ! |
---|
800 | !-- Total sum of all rotor segments: |
---|
801 | nsegs_total(inot) = SUM( nsegs(:,inot) ) |
---|
802 | |
---|
803 | ENDDO |
---|
804 | |
---|
805 | ! |
---|
806 | !-- Maximum number of segments per ring: |
---|
807 | nsegs_max = MAXVAL(nsegs) |
---|
808 | |
---|
809 | !! |
---|
810 | !!-- TODO: Folgendes im Header ausgeben! |
---|
811 | ! IF ( myid == 0 ) THEN |
---|
812 | ! PRINT*, 'nrings(1) = ', nrings(1) |
---|
813 | ! PRINT*, '--------------------------------------------------' |
---|
814 | ! PRINT*, 'nsegs(:,1) = ', nsegs(:,1) |
---|
815 | ! PRINT*, '--------------------------------------------------' |
---|
816 | ! PRINT*, 'nrings_max = ', nrings_max |
---|
817 | ! PRINT*, 'nsegs_max = ', nsegs_max |
---|
818 | ! PRINT*, 'nsegs_total(1) = ', nsegs_total(1) |
---|
819 | ! ENDIF |
---|
820 | |
---|
821 | |
---|
822 | ! |
---|
823 | !-- Allocate 1D arrays (dimension = number of turbines) |
---|
824 | ALLOCATE( i_hub(1:nturbines) ) |
---|
825 | ALLOCATE( i_smear(1:nturbines) ) |
---|
826 | ALLOCATE( j_hub(1:nturbines) ) |
---|
827 | ALLOCATE( j_smear(1:nturbines) ) |
---|
828 | ALLOCATE( k_hub(1:nturbines) ) |
---|
829 | ALLOCATE( k_smear(1:nturbines) ) |
---|
830 | ALLOCATE( torque_total(1:nturbines) ) |
---|
831 | ALLOCATE( thrust_rotor(1:nturbines) ) |
---|
832 | |
---|
833 | ! |
---|
834 | !-- Allocation of the 1D arrays for yaw control |
---|
835 | ALLOCATE( yawdir(1:nturbines) ) |
---|
836 | ALLOCATE( u_inflow(1:nturbines) ) |
---|
837 | ALLOCATE( wdir(1:nturbines) ) |
---|
838 | ALLOCATE( u_inflow_l(1:nturbines) ) |
---|
839 | ALLOCATE( wdir_l(1:nturbines) ) |
---|
840 | ALLOCATE( phi_yaw_l(1:nturbines) ) |
---|
841 | |
---|
842 | ! |
---|
843 | !-- Allocate 1D arrays (dimension = number of rotor segments) |
---|
844 | ALLOCATE( alpha_attack(1:nsegs_max) ) |
---|
845 | ALLOCATE( chord(1:nsegs_max) ) |
---|
846 | ALLOCATE( phi_rel(1:nsegs_max) ) |
---|
847 | ALLOCATE( thrust_seg(1:nsegs_max) ) |
---|
848 | ALLOCATE( torque_seg_y(1:nsegs_max) ) |
---|
849 | ALLOCATE( torque_seg_z(1:nsegs_max) ) |
---|
850 | ALLOCATE( turb_cd(1:nsegs_max) ) |
---|
851 | ALLOCATE( turb_cl(1:nsegs_max) ) |
---|
852 | ALLOCATE( vrel(1:nsegs_max) ) |
---|
853 | ALLOCATE( vtheta(1:nsegs_max) ) |
---|
854 | |
---|
855 | ! |
---|
856 | !-- Allocate 2D arrays (dimension = number of rotor rings and segments) |
---|
857 | ALLOCATE( rbx(1:nrings_max,1:nsegs_max) ) |
---|
858 | ALLOCATE( rby(1:nrings_max,1:nsegs_max) ) |
---|
859 | ALLOCATE( rbz(1:nrings_max,1:nsegs_max) ) |
---|
860 | ALLOCATE( thrust_ring(1:nrings_max,1:nsegs_max) ) |
---|
861 | ALLOCATE( torque_ring_y(1:nrings_max,1:nsegs_max) ) |
---|
862 | ALLOCATE( torque_ring_z(1:nrings_max,1:nsegs_max) ) |
---|
863 | |
---|
864 | ! |
---|
865 | !-- Allocate additional 2D arrays |
---|
866 | ALLOCATE( rotx(1:nturbines,1:3) ) |
---|
867 | ALLOCATE( roty(1:nturbines,1:3) ) |
---|
868 | ALLOCATE( rotz(1:nturbines,1:3) ) |
---|
869 | |
---|
870 | ! |
---|
871 | !-- Allocate 3D arrays (dimension = number of grid points) |
---|
872 | ALLOCATE( nac_cd_surf(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
873 | ALLOCATE( rot_tend_x(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
874 | ALLOCATE( rot_tend_y(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
875 | ALLOCATE( rot_tend_z(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
876 | ALLOCATE( thrust(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
877 | ALLOCATE( torque_y(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
878 | ALLOCATE( torque_z(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
879 | ALLOCATE( tow_cd_surf(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
880 | |
---|
881 | ! |
---|
882 | !-- Allocate additional 3D arrays |
---|
883 | ALLOCATE( u_int(1:nturbines,1:nrings_max,1:nsegs_max) ) |
---|
884 | ALLOCATE( u_int_1_l(1:nturbines,1:nrings_max,1:nsegs_max) ) |
---|
885 | ALLOCATE( v_int(1:nturbines,1:nrings_max,1:nsegs_max) ) |
---|
886 | ALLOCATE( v_int_1_l(1:nturbines,1:nrings_max,1:nsegs_max) ) |
---|
887 | ALLOCATE( w_int(1:nturbines,1:nrings_max,1:nsegs_max) ) |
---|
888 | ALLOCATE( w_int_1_l(1:nturbines,1:nrings_max,1:nsegs_max) ) |
---|
889 | |
---|
890 | ! |
---|
891 | !-- All of the arrays are initialized with a value of zero: |
---|
892 | i_hub(:) = 0 |
---|
893 | i_smear(:) = 0 |
---|
894 | j_hub(:) = 0 |
---|
895 | j_smear(:) = 0 |
---|
896 | k_hub(:) = 0 |
---|
897 | k_smear(:) = 0 |
---|
898 | |
---|
899 | torque_total(:) = 0.0_wp |
---|
900 | thrust_rotor(:) = 0.0_wp |
---|
901 | |
---|
902 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
903 | omega_gen(:) = 0.0_wp |
---|
904 | omega_gen_old(:) = 0.0_wp |
---|
905 | omega_gen_f(:) = 0.0_wp |
---|
906 | omega_gen_f_old(:) = 0.0_wp |
---|
907 | pitch_add_old(:) = 0.0_wp |
---|
908 | torque_gen(:) = 0.0_wp |
---|
909 | torque_gen_old(:) = 0.0_wp |
---|
910 | ENDIF |
---|
911 | |
---|
912 | yawdir(:) = 0.0_wp |
---|
913 | wdir_l(:) = 0.0_wp |
---|
914 | wdir(:) = 0.0_wp |
---|
915 | u_inflow(:) = 0.0_wp |
---|
916 | u_inflow_l(:) = 0.0_wp |
---|
917 | phi_yaw_l(:) = 0.0_wp |
---|
918 | |
---|
919 | ! |
---|
920 | !-- Allocate 1D arrays (dimension = number of rotor segments) |
---|
921 | alpha_attack(:) = 0.0_wp |
---|
922 | chord(:) = 0.0_wp |
---|
923 | phi_rel(:) = 0.0_wp |
---|
924 | thrust_seg(:) = 0.0_wp |
---|
925 | torque_seg_y(:) = 0.0_wp |
---|
926 | torque_seg_z(:) = 0.0_wp |
---|
927 | turb_cd(:) = 0.0_wp |
---|
928 | turb_cl(:) = 0.0_wp |
---|
929 | vrel(:) = 0.0_wp |
---|
930 | vtheta(:) = 0.0_wp |
---|
931 | |
---|
932 | rbx(:,:) = 0.0_wp |
---|
933 | rby(:,:) = 0.0_wp |
---|
934 | rbz(:,:) = 0.0_wp |
---|
935 | thrust_ring(:,:) = 0.0_wp |
---|
936 | torque_ring_y(:,:) = 0.0_wp |
---|
937 | torque_ring_z(:,:) = 0.0_wp |
---|
938 | |
---|
939 | rotx(:,:) = 0.0_wp |
---|
940 | roty(:,:) = 0.0_wp |
---|
941 | rotz(:,:) = 0.0_wp |
---|
942 | |
---|
943 | nac_cd_surf(:,:,:) = 0.0_wp |
---|
944 | rot_tend_x(:,:,:) = 0.0_wp |
---|
945 | rot_tend_y(:,:,:) = 0.0_wp |
---|
946 | rot_tend_z(:,:,:) = 0.0_wp |
---|
947 | thrust(:,:,:) = 0.0_wp |
---|
948 | torque_y(:,:,:) = 0.0_wp |
---|
949 | torque_z(:,:,:) = 0.0_wp |
---|
950 | tow_cd_surf(:,:,:) = 0.0_wp |
---|
951 | |
---|
952 | u_int(:,:,:) = 0.0_wp |
---|
953 | u_int_1_l(:,:,:) = 0.0_wp |
---|
954 | v_int(:,:,:) = 0.0_wp |
---|
955 | v_int_1_l(:,:,:) = 0.0_wp |
---|
956 | w_int(:,:,:) = 0.0_wp |
---|
957 | w_int_1_l(:,:,:) = 0.0_wp |
---|
958 | |
---|
959 | |
---|
960 | END SUBROUTINE wtm_init_arrays |
---|
961 | |
---|
962 | |
---|
963 | !------------------------------------------------------------------------------! |
---|
964 | ! Description: |
---|
965 | ! ------------ |
---|
966 | !> Initialization of the wind turbine model |
---|
967 | !------------------------------------------------------------------------------! |
---|
968 | SUBROUTINE wtm_init |
---|
969 | |
---|
970 | |
---|
971 | USE control_parameters, & |
---|
972 | ONLY: dz_stretch_level_start |
---|
973 | |
---|
974 | IMPLICIT NONE |
---|
975 | |
---|
976 | |
---|
977 | |
---|
978 | INTEGER(iwp) :: i !< running index |
---|
979 | INTEGER(iwp) :: j !< running index |
---|
980 | INTEGER(iwp) :: k !< running index |
---|
981 | |
---|
982 | |
---|
983 | ! |
---|
984 | !-- Help variables for the smearing function |
---|
985 | REAL(wp) :: eps_kernel !< |
---|
986 | |
---|
987 | ! |
---|
988 | !-- Help variables for calculation of the tower drag |
---|
989 | INTEGER(iwp) :: tower_n !< |
---|
990 | INTEGER(iwp) :: tower_s !< |
---|
991 | |
---|
992 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: circle_points !< |
---|
993 | |
---|
994 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nacb !< |
---|
995 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nacl !< |
---|
996 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nacr !< |
---|
997 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: index_nact !< |
---|
998 | |
---|
999 | IF ( debug_output ) CALL debug_message( 'wtm_init', 'start' ) |
---|
1000 | |
---|
1001 | ALLOCATE( index_nacb(1:nturbines) ) |
---|
1002 | ALLOCATE( index_nacl(1:nturbines) ) |
---|
1003 | ALLOCATE( index_nacr(1:nturbines) ) |
---|
1004 | ALLOCATE( index_nact(1:nturbines) ) |
---|
1005 | |
---|
1006 | ! |
---|
1007 | !------------------------------------------------------------------------------! |
---|
1008 | !-- Calculation of parameters for the regularization kernel |
---|
1009 | !-- (smearing of the forces) |
---|
1010 | !------------------------------------------------------------------------------! |
---|
1011 | ! |
---|
1012 | !-- In the following, some of the required parameters for the smearing will |
---|
1013 | !-- be calculated: |
---|
1014 | |
---|
1015 | !-- The kernel is set equal to twice the grid spacing which has turned out to |
---|
1016 | !-- be a reasonable value (see e.g. Troldborg et al. (2013), Wind Energy, |
---|
1017 | !-- DOI: 10.1002/we.1608): |
---|
1018 | eps_kernel = 2.0_wp * dx |
---|
1019 | ! |
---|
1020 | !-- The zero point (eps_min) of the polynomial function must be the following |
---|
1021 | !-- if the integral of the polynomial function (for values < eps_min) shall |
---|
1022 | !-- be equal to the integral of the Gaussian function used before: |
---|
1023 | eps_min = ( 105.0_wp / 32.0_wp )**( 1.0_wp / 3.0_wp ) * & |
---|
1024 | pi**( 1.0_wp / 6.0_wp ) * eps_kernel |
---|
1025 | ! |
---|
1026 | !-- Stretching (non-uniform grid spacing) is not considered in the wind |
---|
1027 | !-- turbine model. Therefore, vertical stretching has to be applied above |
---|
1028 | !-- the area where the wtm is active. ABS (...) is required because the |
---|
1029 | !-- default value of dz_stretch_level_start is -9999999.9_wp (negative). |
---|
1030 | IF ( ABS( dz_stretch_level_start(1) ) <= MAXVAL(rcz(1:nturbines)) + & |
---|
1031 | MAXVAL(rr(1:nturbines)) + & |
---|
1032 | eps_min) THEN |
---|
1033 | WRITE( message_string, * ) 'The lowest level where vertical ', & |
---|
1034 | 'stretching is applied &have to be ', & |
---|
1035 | 'greater than ',MAXVAL(rcz(1:nturbines)) +& |
---|
1036 | MAXVAL(rr(1:nturbines)) + eps_min |
---|
1037 | CALL message( 'wtm_init', 'PA0484', 1, 2, 0, 6, 0 ) |
---|
1038 | ENDIF |
---|
1039 | ! |
---|
1040 | !-- Square of eps_min: |
---|
1041 | eps_min2 = eps_min**2 |
---|
1042 | ! |
---|
1043 | !-- Parameters in the polynomial function: |
---|
1044 | pol_a = 1.0_wp / eps_min**4 |
---|
1045 | pol_b = 2.0_wp / eps_min**2 |
---|
1046 | ! |
---|
1047 | !-- Normalization factor which is the inverse of the integral of the smearing |
---|
1048 | !-- function: |
---|
1049 | eps_factor = 105.0_wp / ( 32.0_wp * pi * eps_min**3 ) |
---|
1050 | |
---|
1051 | !-- Change tilt angle to rad: |
---|
1052 | tilt = tilt * pi / 180.0_wp |
---|
1053 | |
---|
1054 | ! |
---|
1055 | !-- Change yaw angle to rad: |
---|
1056 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
1057 | phi_yaw(:) = phi_yaw(:) * pi / 180.0_wp |
---|
1058 | ENDIF |
---|
1059 | |
---|
1060 | |
---|
1061 | DO inot = 1, nturbines |
---|
1062 | ! |
---|
1063 | !-- Rotate the rotor coordinates in case yaw and tilt are defined |
---|
1064 | CALL wtm_rotate_rotor( inot ) |
---|
1065 | |
---|
1066 | ! |
---|
1067 | !-- Determine the indices of the hub height |
---|
1068 | i_hub(inot) = INT( rcx(inot) / dx ) |
---|
1069 | j_hub(inot) = INT( ( rcy(inot) + 0.5_wp * dy ) / dy ) |
---|
1070 | k_hub(inot) = INT( ( rcz(inot) + 0.5_wp * dz(1) ) / dz(1) ) |
---|
1071 | |
---|
1072 | ! |
---|
1073 | !-- Determining the area to which the smearing of the forces is applied. |
---|
1074 | !-- As smearing now is effectively applied only for distances smaller than |
---|
1075 | !-- eps_min, the smearing area can be further limited and regarded as a |
---|
1076 | !-- function of eps_min: |
---|
1077 | i_smear(inot) = CEILING( ( rr(inot) + eps_min ) / dx ) |
---|
1078 | j_smear(inot) = CEILING( ( rr(inot) + eps_min ) / dy ) |
---|
1079 | k_smear(inot) = CEILING( ( rr(inot) + eps_min ) / dz(1) ) |
---|
1080 | |
---|
1081 | ENDDO |
---|
1082 | |
---|
1083 | ! |
---|
1084 | !-- Call the wtm_init_speed_control subroutine and calculate the local |
---|
1085 | !-- omega_rot for the respective processor. |
---|
1086 | IF ( speed_control) THEN |
---|
1087 | |
---|
1088 | CALL wtm_init_speed_control |
---|
1089 | |
---|
1090 | IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN |
---|
1091 | |
---|
1092 | DO inot = 1, nturbines |
---|
1093 | |
---|
1094 | IF ( nxl > i_hub(inot) ) THEN |
---|
1095 | torque_gen(inot) = 0.0_wp |
---|
1096 | omega_gen_f(inot) = 0.0_wp |
---|
1097 | omega_rot_l(inot) = 0.0_wp |
---|
1098 | ENDIF |
---|
1099 | |
---|
1100 | IF ( nxr < i_hub(inot) ) THEN |
---|
1101 | torque_gen(inot) = 0.0_wp |
---|
1102 | omega_gen_f(inot) = 0.0_wp |
---|
1103 | omega_rot_l(inot) = 0.0_wp |
---|
1104 | ENDIF |
---|
1105 | |
---|
1106 | IF ( nys > j_hub(inot) ) THEN |
---|
1107 | torque_gen(inot) = 0.0_wp |
---|
1108 | omega_gen_f(inot) = 0.0_wp |
---|
1109 | omega_rot_l(inot) = 0.0_wp |
---|
1110 | ENDIF |
---|
1111 | |
---|
1112 | IF ( nyn < j_hub(inot) ) THEN |
---|
1113 | torque_gen(inot) = 0.0_wp |
---|
1114 | omega_gen_f(inot) = 0.0_wp |
---|
1115 | omega_rot_l(inot) = 0.0_wp |
---|
1116 | ENDIF |
---|
1117 | |
---|
1118 | IF ( ( nxl <= i_hub(inot) ) .AND. ( nxr >= i_hub(inot) ) ) THEN |
---|
1119 | IF ( ( nys <= j_hub(inot) ) .AND. ( nyn >= j_hub(inot) ) ) THEN |
---|
1120 | |
---|
1121 | omega_rot_l(inot) = omega_gen(inot) / gear_ratio |
---|
1122 | |
---|
1123 | ENDIF |
---|
1124 | ENDIF |
---|
1125 | |
---|
1126 | END DO |
---|
1127 | |
---|
1128 | ENDIF |
---|
1129 | |
---|
1130 | ENDIF |
---|
1131 | |
---|
1132 | ! |
---|
1133 | !------------------------------------------------------------------------------! |
---|
1134 | !-- Determine the area within each grid cell that overlaps with the area |
---|
1135 | !-- of the nacelle and the tower (needed for calculation of the forces) |
---|
1136 | !------------------------------------------------------------------------------! |
---|
1137 | ! |
---|
1138 | !-- Note: so far this is only a 2D version, in that the mean flow is |
---|
1139 | !-- perpendicular to the rotor area. |
---|
1140 | |
---|
1141 | ! |
---|
1142 | !-- Allocation of the array containing information on the intersection points |
---|
1143 | !-- between rotor disk and the numerical grid: |
---|
1144 | upper_end = ( ny + 1 ) * 10000 |
---|
1145 | |
---|
1146 | ALLOCATE( circle_points(1:2,1:upper_end) ) |
---|
1147 | |
---|
1148 | circle_points(:,:) = 0.0_wp |
---|
1149 | |
---|
1150 | |
---|
1151 | DO inot = 1, nturbines ! loop over number of turbines |
---|
1152 | ! |
---|
1153 | !-- Determine the grid index (u-grid) that corresponds to the location of |
---|
1154 | !-- the rotor center (reduces the amount of calculations in the case that |
---|
1155 | !-- the mean flow is perpendicular to the rotor area): |
---|
1156 | i = i_hub(inot) |
---|
1157 | |
---|
1158 | ! |
---|
1159 | !-- Determine the left and the right edge of the nacelle (corresponding |
---|
1160 | !-- grid point indices): |
---|
1161 | index_nacl(inot) = INT( ( rcy(inot) - rnac(inot) + 0.5_wp * dy ) / dy ) |
---|
1162 | index_nacr(inot) = INT( ( rcy(inot) + rnac(inot) + 0.5_wp * dy ) / dy ) |
---|
1163 | ! |
---|
1164 | !-- Determine the bottom and the top edge of the nacelle (corresponding |
---|
1165 | !-- grid point indices).The grid point index has to be increased by 1, as |
---|
1166 | !-- the first level for the u-component (index 0) is situated below the |
---|
1167 | !-- surface. All points between z=0 and z=dz/s would already be contained |
---|
1168 | !-- in grid box 1. |
---|
1169 | index_nacb(inot) = INT( ( rcz(inot) - rnac(inot) ) / dz(1) ) + 1 |
---|
1170 | index_nact(inot) = INT( ( rcz(inot) + rnac(inot) ) / dz(1) ) + 1 |
---|
1171 | |
---|
1172 | ! |
---|
1173 | !-- Determine the indices of the grid boxes containing the left and |
---|
1174 | !-- the right boundaries of the tower: |
---|
1175 | tower_n = ( rcy(inot) + 0.5_wp * dtow(inot) - 0.5_wp * dy ) / dy |
---|
1176 | tower_s = ( rcy(inot) - 0.5_wp * dtow(inot) - 0.5_wp * dy ) / dy |
---|
1177 | |
---|
1178 | ! |
---|
1179 | !-- Determine the fraction of the grid box area overlapping with the tower |
---|
1180 | !-- area and multiply it with the drag of the tower: |
---|
1181 | IF ( ( nxlg <= i ) .AND. ( nxrg >= i ) ) THEN |
---|
1182 | |
---|
1183 | DO j = nys, nyn |
---|
1184 | ! |
---|
1185 | !-- Loop from south to north boundary of tower |
---|
1186 | IF ( ( j >= tower_s ) .AND. ( j <= tower_n ) ) THEN |
---|
1187 | |
---|
1188 | DO k = nzb, nzt |
---|
1189 | |
---|
1190 | IF ( k == k_hub(inot) ) THEN |
---|
1191 | IF ( tower_n - tower_s >= 1 ) THEN |
---|
1192 | ! |
---|
1193 | !-- leftmost and rightmost grid box: |
---|
1194 | IF ( j == tower_s ) THEN |
---|
1195 | tow_cd_surf(k,j,i) = ( rcz(inot) - & |
---|
1196 | ( k_hub(inot) * dz(1) - 0.5_wp * dz(1) ) )*& ! extension in z-direction |
---|
1197 | ( ( tower_s + 1.0_wp + 0.5_wp ) * dy - & |
---|
1198 | ( rcy(inot) - 0.5_wp * dtow(inot) ) ) * & ! extension in y-direction |
---|
1199 | turb_cd_tower(inot) |
---|
1200 | ELSEIF ( j == tower_n ) THEN |
---|
1201 | tow_cd_surf(k,j,i) = ( rcz(inot) - & |
---|
1202 | ( k_hub(inot) * dz(1) - 0.5_wp * dz(1) ) )*& ! extension in z-direction |
---|
1203 | ( ( rcy(inot) + 0.5_wp * dtow(inot) ) - & |
---|
1204 | ( tower_n + 0.5_wp ) * dy ) * & ! extension in y-direction |
---|
1205 | turb_cd_tower(inot) |
---|
1206 | ! |
---|
1207 | !-- grid boxes inbetween |
---|
1208 | !-- (where tow_cd_surf = grid box area): |
---|
1209 | ELSE |
---|
1210 | tow_cd_surf(k,j,i) = ( rcz(inot) - & |
---|
1211 | ( k_hub(inot) * dz(1) - 0.5_wp * dz(1) ) )*& |
---|
1212 | dy * turb_cd_tower(inot) |
---|
1213 | ENDIF |
---|
1214 | ! |
---|
1215 | !-- tower lies completely within one grid box: |
---|
1216 | ELSE |
---|
1217 | tow_cd_surf(k,j,i) = ( rcz(inot) - ( k_hub(inot) * & |
---|
1218 | dz(1) - 0.5_wp * dz(1) ) ) * & |
---|
1219 | dtow(inot) * turb_cd_tower(inot) |
---|
1220 | ENDIF |
---|
1221 | ! |
---|
1222 | !-- In case that k is smaller than k_hub the following actions |
---|
1223 | !-- are carried out: |
---|
1224 | ELSEIF ( k < k_hub(inot) ) THEN |
---|
1225 | |
---|
1226 | IF ( ( tower_n - tower_s ) >= 1 ) THEN |
---|
1227 | ! |
---|
1228 | !-- leftmost and rightmost grid box: |
---|
1229 | IF ( j == tower_s ) THEN |
---|
1230 | tow_cd_surf(k,j,i) = dz(1) * ( & |
---|
1231 | ( tower_s + 1 + 0.5_wp ) * dy - & |
---|
1232 | ( rcy(inot) - 0.5_wp * dtow(inot) ) & |
---|
1233 | ) * turb_cd_tower(inot) |
---|
1234 | ELSEIF ( j == tower_n ) THEN |
---|
1235 | tow_cd_surf(k,j,i) = dz(1) * ( & |
---|
1236 | ( rcy(inot) + 0.5_wp * dtow(inot) ) - & |
---|
1237 | ( tower_n + 0.5_wp ) * dy & |
---|
1238 | ) * turb_cd_tower(inot) |
---|
1239 | ! |
---|
1240 | !-- grid boxes inbetween |
---|
1241 | !-- (where tow_cd_surf = grid box area): |
---|
1242 | ELSE |
---|
1243 | tow_cd_surf(k,j,i) = dz(1) * dy * & |
---|
1244 | turb_cd_tower(inot) |
---|
1245 | ENDIF |
---|
1246 | ! |
---|
1247 | !-- tower lies completely within one grid box: |
---|
1248 | ELSE |
---|
1249 | tow_cd_surf(k,j,i) = dz(1) * dtow(inot) * & |
---|
1250 | turb_cd_tower(inot) |
---|
1251 | ENDIF ! end if larger than grid box |
---|
1252 | |
---|
1253 | ENDIF ! end if k == k_hub |
---|
1254 | |
---|
1255 | ENDDO ! end loop over k |
---|
1256 | |
---|
1257 | ENDIF ! end if inside north and south boundary of tower |
---|
1258 | |
---|
1259 | ENDDO ! end loop over j |
---|
1260 | |
---|
1261 | ENDIF ! end if hub inside domain + ghostpoints |
---|
1262 | |
---|
1263 | |
---|
1264 | CALL exchange_horiz( tow_cd_surf, nbgp ) |
---|
1265 | |
---|
1266 | ! |
---|
1267 | !-- Calculation of the nacelle area |
---|
1268 | !-- CAUTION: Currently disabled due to segmentation faults on the FLOW HPC |
---|
1269 | !-- cluster (Oldenburg) |
---|
1270 | !! |
---|
1271 | !!-- Tabulate the points on the circle that are required in the following for |
---|
1272 | !!-- the calculation of the Riemann integral (node points; they are called |
---|
1273 | !!-- circle_points in the following): |
---|
1274 | ! |
---|
1275 | ! dy_int = dy / 10000.0_wp |
---|
1276 | ! |
---|
1277 | ! DO i_ip = 1, upper_end |
---|
1278 | ! yvalue = dy_int * ( i_ip - 0.5_wp ) + 0.5_wp * dy !<--- segmentation fault |
---|
1279 | ! sqrt_arg = rnac(inot)**2 - ( yvalue - rcy(inot) )**2 !<--- segmentation fault |
---|
1280 | ! IF ( sqrt_arg >= 0.0_wp ) THEN |
---|
1281 | !! |
---|
1282 | !!-- bottom intersection point |
---|
1283 | ! circle_points(1,i_ip) = rcz(inot) - SQRT( sqrt_arg ) |
---|
1284 | !! |
---|
1285 | !!-- top intersection point |
---|
1286 | ! circle_points(2,i_ip) = rcz(inot) + SQRT( sqrt_arg ) !<--- segmentation fault |
---|
1287 | ! ELSE |
---|
1288 | ! circle_points(:,i_ip) = -111111 !<--- segmentation fault |
---|
1289 | ! ENDIF |
---|
1290 | ! ENDDO |
---|
1291 | ! |
---|
1292 | ! |
---|
1293 | ! DO j = nys, nyn |
---|
1294 | !! |
---|
1295 | !!-- In case that the grid box is located completely outside the nacelle |
---|
1296 | !!-- (y) it can automatically be stated that there is no overlap between |
---|
1297 | !!-- the grid box and the nacelle and consequently we can set |
---|
1298 | !!-- nac_cd_surf(:,j,i) = 0.0: |
---|
1299 | ! IF ( ( j >= index_nacl(inot) ) .AND. ( j <= index_nacr(inot) ) ) THEN |
---|
1300 | ! DO k = nzb+1, nzt |
---|
1301 | !! |
---|
1302 | !!-- In case that the grid box is located completely outside the |
---|
1303 | !!-- nacelle (z) it can automatically be stated that there is no |
---|
1304 | !!-- overlap between the grid box and the nacelle and consequently |
---|
1305 | !!-- we can set nac_cd_surf(k,j,i) = 0.0: |
---|
1306 | ! IF ( ( k >= index_nacb(inot) ) .OR. & |
---|
1307 | ! ( k <= index_nact(inot) ) ) THEN |
---|
1308 | !! |
---|
1309 | !!-- For all other cases Riemann integrals are calculated. |
---|
1310 | !!-- Here, the points on the circle that have been determined |
---|
1311 | !!-- above are used in order to calculate the overlap between the |
---|
1312 | !!-- gridbox and the nacelle area (area approached by 10000 |
---|
1313 | !!-- rectangulars dz_int * dy_int): |
---|
1314 | ! DO i_ipg = 1, 10000 |
---|
1315 | ! dz_int = dz |
---|
1316 | ! i_ip = j * 10000 + i_ipg |
---|
1317 | !! |
---|
1318 | !!-- Determine the vertical extension dz_int of the circle |
---|
1319 | !!-- within the current grid box: |
---|
1320 | ! IF ( ( circle_points(2,i_ip) < zw(k) ) .AND. & !<--- segmentation fault |
---|
1321 | ! ( circle_points(2,i_ip) >= zw(k-1) ) ) THEN |
---|
1322 | ! dz_int = dz_int - & !<--- segmentation fault |
---|
1323 | ! ( zw(k) - circle_points(2,i_ip) ) |
---|
1324 | ! ENDIF |
---|
1325 | ! IF ( ( circle_points(1,i_ip) <= zw(k) ) .AND. & !<--- segmentation fault |
---|
1326 | ! ( circle_points(1,i_ip) > zw(k-1) ) ) THEN |
---|
1327 | ! dz_int = dz_int - & |
---|
1328 | ! ( circle_points(1,i_ip) - zw(k-1) ) |
---|
1329 | ! ENDIF |
---|
1330 | ! IF ( zw(k-1) > circle_points(2,i_ip) ) THEN |
---|
1331 | ! dz_int = 0.0_wp |
---|
1332 | ! ENDIF |
---|
1333 | ! IF ( zw(k) < circle_points(1,i_ip) ) THEN |
---|
1334 | ! dz_int = 0.0_wp |
---|
1335 | ! ENDIF |
---|
1336 | ! IF ( ( nxlg <= i ) .AND. ( nxrg >= i ) ) THEN |
---|
1337 | ! nac_cd_surf(k,j,i) = nac_cd_surf(k,j,i) + & !<--- segmentation fault |
---|
1338 | ! dy_int * dz_int * turb_cd_nacelle(inot) |
---|
1339 | ! ENDIF |
---|
1340 | ! ENDDO |
---|
1341 | ! ENDIF |
---|
1342 | ! ENDDO |
---|
1343 | ! ENDIF |
---|
1344 | ! |
---|
1345 | ! ENDDO |
---|
1346 | ! |
---|
1347 | ! CALL exchange_horiz( nac_cd_surf, nbgp ) !<--- segmentation fault |
---|
1348 | |
---|
1349 | ENDDO ! end of loop over turbines |
---|
1350 | |
---|
1351 | tow_cd_surf = tow_cd_surf / ( dx * dy * dz(1) ) ! Normalize tower drag |
---|
1352 | nac_cd_surf = nac_cd_surf / ( dx * dy * dz(1) ) ! Normalize nacelle drag |
---|
1353 | |
---|
1354 | CALL wtm_read_blade_tables |
---|
1355 | |
---|
1356 | IF ( debug_output ) CALL debug_message( 'wtm_init', 'end' ) |
---|
1357 | |
---|
1358 | END SUBROUTINE wtm_init |
---|
1359 | |
---|
1360 | |
---|
1361 | |
---|
1362 | SUBROUTINE wtm_init_output |
---|
1363 | |
---|
1364 | |
---|
1365 | ! INTEGER(iwp) :: ntimesteps !< number of timesteps defined in NetCDF output file |
---|
1366 | ! INTEGER(iwp) :: ntimesteps_max = 80000 !< number of maximum timesteps defined in NetCDF output file |
---|
1367 | INTEGER(iwp) :: return_value !< returned status value of called function |
---|
1368 | |
---|
1369 | INTEGER(iwp) :: n !< running index |
---|
1370 | |
---|
1371 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ndim !< dummy to write dimension |
---|
1372 | |
---|
1373 | |
---|
1374 | ! |
---|
1375 | !-- Create NetCDF output file |
---|
1376 | nc_filename = 'DATA_1D_TS_WTM_NETCDF' // TRIM( coupling_char ) |
---|
1377 | return_value = dom_def_file( nc_filename, 'netcdf4-serial' ) |
---|
1378 | |
---|
1379 | IF ( myid == 0 ) THEN |
---|
1380 | ! |
---|
1381 | !-- Define dimensions in output file |
---|
1382 | ALLOCATE( ndim(1:nturbines) ) |
---|
1383 | DO n = 1, nturbines |
---|
1384 | ndim(n) = n |
---|
1385 | ENDDO |
---|
1386 | return_value = dom_def_dim( nc_filename, & |
---|
1387 | dimension_name = 'turbine', & |
---|
1388 | output_type = 'int32', & |
---|
1389 | bounds = (/1_iwp, nturbines/), & |
---|
1390 | values_int32 = ndim ) |
---|
1391 | DEALLOCATE( ndim ) |
---|
1392 | |
---|
1393 | ! |
---|
1394 | !-- time |
---|
1395 | return_value = dom_def_dim( nc_filename, & |
---|
1396 | dimension_name = 'time', & |
---|
1397 | output_type = 'real32', & |
---|
1398 | bounds = (/1_iwp/), & |
---|
1399 | values_realwp = (/0.0_wp/) ) |
---|
1400 | |
---|
1401 | ! |
---|
1402 | !-- x |
---|
1403 | variable_name = 'x' |
---|
1404 | return_value = dom_def_var( nc_filename, & |
---|
1405 | variable_name = variable_name, & |
---|
1406 | dimension_names = (/'turbine'/), & |
---|
1407 | output_type = 'real32' ) |
---|
1408 | ! |
---|
1409 | !-- y |
---|
1410 | variable_name = 'y' |
---|
1411 | return_value = dom_def_var( nc_filename, & |
---|
1412 | variable_name = variable_name, & |
---|
1413 | dimension_names = (/'turbine'/), & |
---|
1414 | output_type = 'real32' ) |
---|
1415 | |
---|
1416 | variable_name = 'z' |
---|
1417 | return_value = dom_def_var( nc_filename, & |
---|
1418 | variable_name = variable_name, & |
---|
1419 | dimension_names = (/'turbine'/), & |
---|
1420 | output_type = 'real32' ) |
---|
1421 | |
---|
1422 | |
---|
1423 | return_value = dom_def_att( nc_filename, & |
---|
1424 | variable_name = 'time', & |
---|
1425 | attribute_name = 'units', & |
---|
1426 | value = 'seconds since ' // origin_date_time ) |
---|
1427 | |
---|
1428 | return_value = dom_def_att( nc_filename, & |
---|
1429 | variable_name = 'x', & |
---|
1430 | attribute_name = 'units', & |
---|
1431 | value = 'm' ) |
---|
1432 | |
---|
1433 | return_value = dom_def_att( nc_filename, & |
---|
1434 | variable_name = 'y', & |
---|
1435 | attribute_name = 'units', & |
---|
1436 | value = 'm' ) |
---|
1437 | |
---|
1438 | return_value = dom_def_att( nc_filename, & |
---|
1439 | variable_name = 'z', & |
---|
1440 | attribute_name = 'units', & |
---|
1441 | value = 'm' ) |
---|
1442 | |
---|
1443 | return_value = dom_def_att( nc_filename, & |
---|
1444 | variable_name = 'x', & |
---|
1445 | attribute_name = 'long_name', & |
---|
1446 | value = 'x location of rotor center' ) |
---|
1447 | |
---|
1448 | return_value = dom_def_att( nc_filename, & |
---|
1449 | variable_name = 'y', & |
---|
1450 | attribute_name = 'long_name', & |
---|
1451 | value = 'y location of rotor center' ) |
---|
1452 | |
---|
1453 | return_value = dom_def_att( nc_filename, & |
---|
1454 | variable_name = 'z', & |
---|
1455 | attribute_name = 'long_name', & |
---|
1456 | value = 'z location of rotor center' ) |
---|
1457 | |
---|
1458 | |
---|
1459 | return_value = dom_def_att( nc_filename, & |
---|
1460 | variable_name = 'turbine_name', & |
---|
1461 | attribute_name = 'long_name', & |
---|
1462 | value = 'turbine name') |
---|
1463 | |
---|
1464 | return_value = dom_def_att( nc_filename, & |
---|
1465 | variable_name = 'time', & |
---|
1466 | attribute_name = 'standard_name', & |
---|
1467 | value = 'time') |
---|
1468 | |
---|
1469 | return_value = dom_def_att( nc_filename, & |
---|
1470 | variable_name = 'time', & |
---|
1471 | attribute_name = 'axis', & |
---|
1472 | value = 'T') |
---|
1473 | |
---|
1474 | return_value = dom_def_att( nc_filename, & |
---|
1475 | variable_name = 'x', & |
---|
1476 | attribute_name = 'axis', & |
---|
1477 | value = 'X' ) |
---|
1478 | |
---|
1479 | return_value = dom_def_att( nc_filename, & |
---|
1480 | variable_name = 'y', & |
---|
1481 | attribute_name = 'axis', & |
---|
1482 | value = 'Y' ) |
---|
1483 | |
---|
1484 | |
---|
1485 | variable_name = 'rotor_speed' |
---|
1486 | return_value = dom_def_var( nc_filename, & |
---|
1487 | variable_name = variable_name, & |
---|
1488 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1489 | output_type = 'real32' ) |
---|
1490 | |
---|
1491 | return_value = dom_def_att( nc_filename, & |
---|
1492 | variable_name = variable_name, & |
---|
1493 | attribute_name = 'units', & |
---|
1494 | value = 'rad/s' ) |
---|
1495 | |
---|
1496 | variable_name = 'generator_speed' |
---|
1497 | return_value = dom_def_var( nc_filename, & |
---|
1498 | variable_name = variable_name, & |
---|
1499 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1500 | output_type = 'real32' ) |
---|
1501 | |
---|
1502 | return_value = dom_def_att( nc_filename, & |
---|
1503 | variable_name = variable_name, & |
---|
1504 | attribute_name = 'units', & |
---|
1505 | value = 'rad/s' ) |
---|
1506 | |
---|
1507 | |
---|
1508 | variable_name = 'generator_torque' |
---|
1509 | return_value = dom_def_var( nc_filename, & |
---|
1510 | variable_name = variable_name, & |
---|
1511 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1512 | output_type = 'real32' ) |
---|
1513 | |
---|
1514 | return_value = dom_def_att( nc_filename, & |
---|
1515 | variable_name = variable_name, & |
---|
1516 | attribute_name = 'units', & |
---|
1517 | value = 'Nm' ) |
---|
1518 | |
---|
1519 | variable_name = 'rotor_torque' |
---|
1520 | return_value = dom_def_var( nc_filename, & |
---|
1521 | variable_name = variable_name, & |
---|
1522 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1523 | output_type = 'real32' ) |
---|
1524 | |
---|
1525 | return_value = dom_def_att( nc_filename, & |
---|
1526 | variable_name = variable_name, & |
---|
1527 | attribute_name = 'units', & |
---|
1528 | value = 'Nm' ) |
---|
1529 | |
---|
1530 | variable_name = 'pitch_angle' |
---|
1531 | return_value = dom_def_var( nc_filename, & |
---|
1532 | variable_name = variable_name, & |
---|
1533 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1534 | output_type = 'real32' ) |
---|
1535 | |
---|
1536 | return_value = dom_def_att( nc_filename, & |
---|
1537 | variable_name = variable_name, & |
---|
1538 | attribute_name = 'units', & |
---|
1539 | value = 'degrees' ) |
---|
1540 | |
---|
1541 | variable_name = 'generator_power' |
---|
1542 | return_value = dom_def_var( nc_filename, & |
---|
1543 | variable_name = variable_name, & |
---|
1544 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1545 | output_type = 'real32' ) |
---|
1546 | |
---|
1547 | return_value = dom_def_att( nc_filename, & |
---|
1548 | variable_name = variable_name, & |
---|
1549 | attribute_name = 'units', & |
---|
1550 | value = 'W' ) |
---|
1551 | |
---|
1552 | variable_name = 'rotor_power' |
---|
1553 | return_value = dom_def_var( nc_filename, & |
---|
1554 | variable_name = variable_name, & |
---|
1555 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1556 | output_type = 'real32' ) |
---|
1557 | |
---|
1558 | return_value = dom_def_att( nc_filename, & |
---|
1559 | variable_name = variable_name, & |
---|
1560 | attribute_name = 'units', & |
---|
1561 | value = 'W' ) |
---|
1562 | |
---|
1563 | variable_name = 'rotor_thrust' |
---|
1564 | return_value = dom_def_var( nc_filename, & |
---|
1565 | variable_name = variable_name, & |
---|
1566 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1567 | output_type = 'real32' ) |
---|
1568 | |
---|
1569 | return_value = dom_def_att( nc_filename, & |
---|
1570 | variable_name = variable_name, & |
---|
1571 | attribute_name = 'units', & |
---|
1572 | value = 'N' ) |
---|
1573 | |
---|
1574 | |
---|
1575 | variable_name = 'wind_direction' |
---|
1576 | return_value = dom_def_var( nc_filename, & |
---|
1577 | variable_name = variable_name, & |
---|
1578 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1579 | output_type = 'real32' ) |
---|
1580 | |
---|
1581 | return_value = dom_def_att( nc_filename, & |
---|
1582 | variable_name = variable_name, & |
---|
1583 | attribute_name = 'units', & |
---|
1584 | value = 'degrees' ) |
---|
1585 | |
---|
1586 | variable_name = 'yaw_angle' |
---|
1587 | return_value = dom_def_var( nc_filename, & |
---|
1588 | variable_name = variable_name, & |
---|
1589 | dimension_names = (/ 'turbine', 'time ' /), & |
---|
1590 | output_type = 'real32' ) |
---|
1591 | |
---|
1592 | return_value = dom_def_att( nc_filename, & |
---|
1593 | variable_name = variable_name, & |
---|
1594 | attribute_name = 'units', & |
---|
1595 | value = 'degrees' ) |
---|
1596 | |
---|
1597 | ENDIF |
---|
1598 | END SUBROUTINE |
---|
1599 | |
---|
1600 | !------------------------------------------------------------------------------! |
---|
1601 | ! Description: |
---|
1602 | ! ------------ |
---|
1603 | !> Read in layout of the rotor blade , the lift and drag tables |
---|
1604 | !> and the distribution of lift and drag tables along the blade |
---|
1605 | !------------------------------------------------------------------------------! |
---|
1606 | ! |
---|
1607 | SUBROUTINE wtm_read_blade_tables |
---|
1608 | |
---|
1609 | |
---|
1610 | IMPLICIT NONE |
---|
1611 | |
---|
1612 | INTEGER(iwp) :: ii !< running index |
---|
1613 | INTEGER(iwp) :: jj !< running index |
---|
1614 | |
---|
1615 | INTEGER(iwp) :: ierrn !< |
---|
1616 | |
---|
1617 | CHARACTER(200) :: chmess !< Read in string |
---|
1618 | |
---|
1619 | INTEGER(iwp) :: dlen !< no. rows of local table |
---|
1620 | INTEGER(iwp) :: dlenbl !< no. rows of cd, cl table |
---|
1621 | INTEGER(iwp) :: ialpha !< table position of current alpha value |
---|
1622 | INTEGER(iwp) :: iialpha !< |
---|
1623 | INTEGER(iwp) :: iir !< |
---|
1624 | INTEGER(iwp) :: radres !< radial resolution |
---|
1625 | INTEGER(iwp) :: t1 !< no. of airfoil |
---|
1626 | INTEGER(iwp) :: t2 !< no. of airfoil |
---|
1627 | INTEGER(iwp) :: trow !< |
---|
1628 | INTEGER(iwp) :: dlenbl_int !< no. rows of interpolated cd, cl tables |
---|
1629 | |
---|
1630 | REAL(wp) :: alpha_attack_i !< |
---|
1631 | REAL(wp) :: weight_a !< |
---|
1632 | REAL(wp) :: weight_b !< |
---|
1633 | |
---|
1634 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ttoint1 !< |
---|
1635 | INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: ttoint2 !< |
---|
1636 | |
---|
1637 | REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cd_sel1 !< |
---|
1638 | REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cd_sel2 !< |
---|
1639 | REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cl_sel1 !< |
---|
1640 | REAL(wp), DIMENSION(:), ALLOCATABLE :: turb_cl_sel2 !< |
---|
1641 | REAL(wp), DIMENSION(:), ALLOCATABLE :: read_cl_cd !< read in var array |
---|
1642 | |
---|
1643 | REAL(wp), DIMENSION(:), ALLOCATABLE :: alpha_attack_tab !< |
---|
1644 | REAL(wp), DIMENSION(:), ALLOCATABLE :: trad1 !< |
---|
1645 | REAL(wp), DIMENSION(:), ALLOCATABLE :: trad2 !< |
---|
1646 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cd_table !< |
---|
1647 | REAL(wp), DIMENSION(:,:), ALLOCATABLE :: turb_cl_table !< |
---|
1648 | |
---|
1649 | ALLOCATE ( read_cl_cd(1:2*nairfoils+1) ) |
---|
1650 | |
---|
1651 | ! |
---|
1652 | !-- Read in the distribution of lift and drag tables along the blade, the |
---|
1653 | !-- layout of the rotor blade and the lift and drag tables: |
---|
1654 | |
---|
1655 | OPEN ( 90, FILE='WTM_DATA', STATUS='OLD', FORM='FORMATTED', IOSTAT=ierrn ) |
---|
1656 | |
---|
1657 | IF ( ierrn /= 0 ) THEN |
---|
1658 | message_string = 'file WTM_DATA does not exist' |
---|
1659 | CALL message( 'wtm_init', 'PA0464', 1, 2, 0, 6, 0 ) |
---|
1660 | ENDIF |
---|
1661 | ! |
---|
1662 | !-- Read distribution table: |
---|
1663 | |
---|
1664 | dlen = 0 |
---|
1665 | |
---|
1666 | READ ( 90, '(3/)' ) |
---|
1667 | |
---|
1668 | rloop3: DO |
---|
1669 | READ ( 90, *, IOSTAT=ierrn ) chmess |
---|
1670 | IF ( ierrn < 0 .OR. chmess == '#' .OR. chmess == '') EXIT rloop3 |
---|
1671 | dlen = dlen + 1 |
---|
1672 | ENDDO rloop3 |
---|
1673 | |
---|
1674 | ALLOCATE( trad1(1:dlen), trad2(1:dlen), ttoint1(1:dlen), ttoint2(1:dlen)) |
---|
1675 | |
---|
1676 | DO jj = 1,dlen+1 |
---|
1677 | BACKSPACE ( 90, IOSTAT=ierrn ) |
---|
1678 | ENDDO |
---|
1679 | |
---|
1680 | DO jj = 1,dlen |
---|
1681 | READ ( 90, * ) trad1(jj), trad2(jj), ttoint1(jj), ttoint2(jj) |
---|
1682 | ENDDO |
---|
1683 | |
---|
1684 | ! |
---|
1685 | !-- Read layout table: |
---|
1686 | |
---|
1687 | dlen = 0 |
---|
1688 | |
---|
1689 | READ ( 90, '(3/)') |
---|
1690 | |
---|
1691 | rloop1: DO |
---|
1692 | READ ( 90, *, IOSTAT=ierrn ) chmess |
---|
1693 | IF ( ierrn < 0 .OR. chmess == '#' .OR. chmess == '') EXIT rloop1 |
---|
1694 | dlen = dlen + 1 |
---|
1695 | ENDDO rloop1 |
---|
1696 | |
---|
1697 | ALLOCATE( lrd(1:dlen), ard(1:dlen), crd(1:dlen) ) |
---|
1698 | DO jj = 1, dlen+1 |
---|
1699 | BACKSPACE ( 90, IOSTAT=ierrn ) |
---|
1700 | ENDDO |
---|
1701 | DO jj = 1, dlen |
---|
1702 | READ ( 90, * ) lrd(jj), ard(jj), crd(jj) |
---|
1703 | ENDDO |
---|
1704 | |
---|
1705 | ! |
---|
1706 | !-- Read tables (turb_cl(alpha),turb_cd(alpha) for the different profiles: |
---|
1707 | |
---|
1708 | dlen = 0 |
---|
1709 | |
---|
1710 | READ ( 90, '(3/)' ) |
---|
1711 | |
---|
1712 | rloop2: DO |
---|
1713 | READ ( 90, *, IOSTAT=ierrn ) chmess |
---|
1714 | IF ( ierrn < 0 .OR. chmess == '#' .OR. chmess == '') EXIT rloop2 |
---|
1715 | dlen = dlen + 1 |
---|
1716 | ENDDO rloop2 |
---|
1717 | |
---|
1718 | ALLOCATE( alpha_attack_tab(1:dlen), turb_cl_table(1:dlen,1:nairfoils), & |
---|
1719 | turb_cd_table(1:dlen,1:nairfoils) ) |
---|
1720 | |
---|
1721 | DO jj = 1,dlen+1 |
---|
1722 | BACKSPACE ( 90, IOSTAT=ierrn ) |
---|
1723 | ENDDO |
---|
1724 | |
---|
1725 | DO jj = 1,dlen |
---|
1726 | READ ( 90, * ) read_cl_cd |
---|
1727 | alpha_attack_tab(jj) = read_cl_cd(1) |
---|
1728 | DO ii= 1, nairfoils |
---|
1729 | turb_cl_table(jj,ii) = read_cl_cd(ii*2) |
---|
1730 | turb_cd_table(jj,ii) = read_cl_cd(ii*2+1) |
---|
1731 | ENDDO |
---|
1732 | |
---|
1733 | ENDDO |
---|
1734 | |
---|
1735 | dlenbl = dlen |
---|
1736 | |
---|
1737 | CLOSE ( 90 ) |
---|
1738 | |
---|
1739 | ! |
---|
1740 | !-- For each possible radial position (resolution: 0.1 m --> 631 values if rr(1)=63m) |
---|
1741 | !-- and each possible angle of attack (resolution: 0.1 degrees --> 3601 values!) |
---|
1742 | !-- determine the lift and drag coefficient by interpolating between the |
---|
1743 | !-- tabulated values of each table (interpolate to current angle of attack) |
---|
1744 | !-- and between the tables (interpolate to current radial position): |
---|
1745 | |
---|
1746 | ALLOCATE( turb_cl_sel1(1:dlenbl) ) |
---|
1747 | ALLOCATE( turb_cl_sel2(1:dlenbl) ) |
---|
1748 | ALLOCATE( turb_cd_sel1(1:dlenbl) ) |
---|
1749 | ALLOCATE( turb_cd_sel2(1:dlenbl) ) |
---|
1750 | |
---|
1751 | radres = INT( rr(1) * 10.0_wp ) + 1_iwp |
---|
1752 | dlenbl_int = INT( 360.0_wp / accu_cl_cd_tab ) + 1_iwp |
---|
1753 | |
---|
1754 | ALLOCATE( turb_cl_tab(1:dlenbl_int,1:radres) ) |
---|
1755 | ALLOCATE( turb_cd_tab(1:dlenbl_int,1:radres) ) |
---|
1756 | |
---|
1757 | DO iir = 1, radres ! loop over radius |
---|
1758 | |
---|
1759 | cur_r = ( iir - 1_iwp ) * 0.1_wp |
---|
1760 | ! |
---|
1761 | !-- Find position in table 1 |
---|
1762 | lct = MINLOC( ABS( trad1 - cur_r ) ) |
---|
1763 | ! lct(1) = lct(1) |
---|
1764 | |
---|
1765 | IF ( ( trad1(lct(1)) - cur_r ) > 0.0 ) THEN |
---|
1766 | lct(1) = lct(1) - 1 |
---|
1767 | ENDIF |
---|
1768 | |
---|
1769 | trow = lct(1) |
---|
1770 | ! |
---|
1771 | !-- Calculate weights for radius interpolation |
---|
1772 | weight_a = ( trad2(trow) - cur_r ) / ( trad2(trow) - trad1(trow) ) |
---|
1773 | weight_b = ( cur_r - trad1(trow) ) / ( trad2(trow) - trad1(trow) ) |
---|
1774 | t1 = ttoint1(trow) |
---|
1775 | t2 = ttoint2(trow) |
---|
1776 | |
---|
1777 | IF ( t1 == t2 ) THEN ! if both are the same, the weights are NaN |
---|
1778 | weight_a = 0.5_wp ! then do interpolate in between same twice |
---|
1779 | weight_b = 0.5_wp ! using 0.5 as weight |
---|
1780 | ENDIF |
---|
1781 | |
---|
1782 | IF ( t1 == 0 .AND. t2 == 0 ) THEN |
---|
1783 | turb_cd_sel1 = 0.0_wp |
---|
1784 | turb_cd_sel2 = 0.0_wp |
---|
1785 | turb_cl_sel1 = 0.0_wp |
---|
1786 | turb_cl_sel2 = 0.0_wp |
---|
1787 | |
---|
1788 | turb_cd_tab(1,iir) = 0.0_wp ! For -180 degrees (iialpha=1) the values |
---|
1789 | turb_cl_tab(1,iir) = 0.0_wp ! for each radius has to be set |
---|
1790 | ! explicitly |
---|
1791 | ELSE |
---|
1792 | turb_cd_sel1 = turb_cd_table(:,t1) |
---|
1793 | turb_cd_sel2 = turb_cd_table(:,t2) |
---|
1794 | turb_cl_sel1 = turb_cl_table(:,t1) |
---|
1795 | turb_cl_sel2 = turb_cl_table(:,t2) |
---|
1796 | ! |
---|
1797 | !-- For -180 degrees (iialpha=1) the values for each radius has to be set |
---|
1798 | !-- explicitly |
---|
1799 | turb_cd_tab(1,iir) = ( weight_a * turb_cd_table(1,t1) + weight_b & |
---|
1800 | * turb_cd_table(1,t2) ) |
---|
1801 | turb_cl_tab(1,iir) = ( weight_a * turb_cl_table(1,t1) + weight_b & |
---|
1802 | * turb_cl_table(1,t2) ) |
---|
1803 | ENDIF |
---|
1804 | |
---|
1805 | DO iialpha = 2, dlenbl_int ! loop over angles |
---|
1806 | |
---|
1807 | alpha_attack_i = -180.0_wp + REAL( iialpha-1 ) * accu_cl_cd_tab |
---|
1808 | ialpha = 1 |
---|
1809 | |
---|
1810 | DO WHILE ( ( alpha_attack_i > alpha_attack_tab(ialpha) ) .AND. (ialpha < dlen ) ) |
---|
1811 | ialpha = ialpha + 1 |
---|
1812 | ENDDO |
---|
1813 | |
---|
1814 | ! |
---|
1815 | !-- Interpolation of lift and drag coefficiencts on fine grid of radius |
---|
1816 | !-- segments and angles of attack |
---|
1817 | |
---|
1818 | turb_cl_tab(iialpha,iir) = ( alpha_attack_tab(ialpha) - & |
---|
1819 | alpha_attack_i ) / & |
---|
1820 | ( alpha_attack_tab(ialpha) - & |
---|
1821 | alpha_attack_tab(ialpha-1) ) * & |
---|
1822 | ( weight_a * turb_cl_sel1(ialpha-1) + & |
---|
1823 | weight_b * turb_cl_sel2(ialpha-1) ) +& |
---|
1824 | ( alpha_attack_i - & |
---|
1825 | alpha_attack_tab(ialpha-1) ) / & |
---|
1826 | ( alpha_attack_tab(ialpha) - & |
---|
1827 | alpha_attack_tab(ialpha-1) ) * & |
---|
1828 | ( weight_a * turb_cl_sel1(ialpha) + & |
---|
1829 | weight_b * turb_cl_sel2(ialpha) ) |
---|
1830 | turb_cd_tab(iialpha,iir) = ( alpha_attack_tab(ialpha) - & |
---|
1831 | alpha_attack_i ) / & |
---|
1832 | ( alpha_attack_tab(ialpha) - & |
---|
1833 | alpha_attack_tab(ialpha-1) ) * & |
---|
1834 | ( weight_a * turb_cd_sel1(ialpha-1) + & |
---|
1835 | weight_b * turb_cd_sel2(ialpha-1) ) +& |
---|
1836 | ( alpha_attack_i - & |
---|
1837 | alpha_attack_tab(ialpha-1) ) / & |
---|
1838 | ( alpha_attack_tab(ialpha) - & |
---|
1839 | alpha_attack_tab(ialpha-1) ) * & |
---|
1840 | ( weight_a * turb_cd_sel1(ialpha) + & |
---|
1841 | weight_b * turb_cd_sel2(ialpha) ) |
---|
1842 | |
---|
1843 | ENDDO ! end loop over angles of attack |
---|
1844 | |
---|
1845 | ENDDO ! end loop over radius |
---|
1846 | |
---|
1847 | |
---|
1848 | END SUBROUTINE wtm_read_blade_tables |
---|
1849 | |
---|
1850 | |
---|
1851 | !------------------------------------------------------------------------------! |
---|
1852 | ! Description: |
---|
1853 | ! ------------ |
---|
1854 | !> The projection matrix for the coordinate system of therotor disc in respect |
---|
1855 | !> to the yaw and tilt angle of the rotor is calculated |
---|
1856 | !------------------------------------------------------------------------------! |
---|
1857 | SUBROUTINE wtm_rotate_rotor( inot ) |
---|
1858 | |
---|
1859 | |
---|
1860 | IMPLICIT NONE |
---|
1861 | |
---|
1862 | INTEGER(iwp) :: inot |
---|
1863 | ! |
---|
1864 | !-- Calculation of the rotation matrix for the application of the tilt to |
---|
1865 | !-- the rotors |
---|
1866 | rot_eigen_rad(1) = SIN( phi_yaw(inot) ) ! x-component of the radial eigenvector |
---|
1867 | rot_eigen_rad(2) = COS( phi_yaw(inot) ) ! y-component of the radial eigenvector |
---|
1868 | rot_eigen_rad(3) = 0.0_wp ! z-component of the radial eigenvector |
---|
1869 | |
---|
1870 | rot_eigen_azi(1) = 0.0_wp ! x-component of the azimuth eigenvector |
---|
1871 | rot_eigen_azi(2) = 0.0_wp ! y-component of the azimuth eigenvector |
---|
1872 | rot_eigen_azi(3) = 1.0_wp ! z-component of the azimuth eigenvector |
---|
1873 | |
---|
1874 | rot_eigen_nor(1) = COS( phi_yaw(inot) ) ! x-component of the normal eigenvector |
---|
1875 | rot_eigen_nor(2) = -SIN( phi_yaw(inot) ) ! y-component of the normal eigenvector |
---|
1876 | rot_eigen_nor(3) = 0.0_wp ! z-component of the normal eigenvector |
---|
1877 | |
---|
1878 | ! |
---|
1879 | !-- Calculation of the coordinate transformation matrix to apply a tilt to |
---|
1880 | !-- the rotor. If tilt = 0, rot_coord_trans is a unit matrix. |
---|
1881 | |
---|
1882 | rot_coord_trans(inot,1,1) = rot_eigen_rad(1)**2 * & |
---|
1883 | ( 1.0_wp - COS( tilt ) ) + COS( tilt ) |
---|
1884 | rot_coord_trans(inot,1,2) = rot_eigen_rad(1) * rot_eigen_rad(2) * & |
---|
1885 | ( 1.0_wp - COS( tilt ) ) - & |
---|
1886 | rot_eigen_rad(3) * SIN( tilt ) |
---|
1887 | rot_coord_trans(inot,1,3) = rot_eigen_rad(1) * rot_eigen_rad(3) * & |
---|
1888 | ( 1.0_wp - COS( tilt ) ) + & |
---|
1889 | rot_eigen_rad(2) * SIN( tilt ) |
---|
1890 | rot_coord_trans(inot,2,1) = rot_eigen_rad(2) * rot_eigen_rad(1) * & |
---|
1891 | ( 1.0_wp - COS( tilt ) ) + & |
---|
1892 | rot_eigen_rad(3) * SIN( tilt ) |
---|
1893 | rot_coord_trans(inot,2,2) = rot_eigen_rad(2)**2 * & |
---|
1894 | ( 1.0_wp - COS( tilt ) ) + COS( tilt ) |
---|
1895 | rot_coord_trans(inot,2,3) = rot_eigen_rad(2) * rot_eigen_rad(3) * & |
---|
1896 | ( 1.0_wp - COS( tilt ) ) - & |
---|
1897 | rot_eigen_rad(1) * SIN( tilt ) |
---|
1898 | rot_coord_trans(inot,3,1) = rot_eigen_rad(3) * rot_eigen_rad(1) * & |
---|
1899 | ( 1.0_wp - COS( tilt ) ) - & |
---|
1900 | rot_eigen_rad(2) * SIN( tilt ) |
---|
1901 | rot_coord_trans(inot,3,2) = rot_eigen_rad(3) * rot_eigen_rad(2) * & |
---|
1902 | ( 1.0_wp - COS( tilt ) ) + & |
---|
1903 | rot_eigen_rad(1) * SIN( tilt ) |
---|
1904 | rot_coord_trans(inot,3,3) = rot_eigen_rad(3)**2 * & |
---|
1905 | ( 1.0_wp - COS( tilt ) ) + COS( tilt ) |
---|
1906 | |
---|
1907 | ! |
---|
1908 | !-- Vectors for the Transformation of forces from the rotor's spheric |
---|
1909 | !-- coordinate system to the cartesian coordinate system |
---|
1910 | rotx(inot,:) = MATMUL( rot_coord_trans(inot,:,:), rot_eigen_nor ) |
---|
1911 | roty(inot,:) = MATMUL( rot_coord_trans(inot,:,:), rot_eigen_rad ) |
---|
1912 | rotz(inot,:) = MATMUL( rot_coord_trans(inot,:,:), rot_eigen_azi ) |
---|
1913 | |
---|
1914 | END SUBROUTINE wtm_rotate_rotor |
---|
1915 | |
---|
1916 | |
---|
1917 | !------------------------------------------------------------------------------! |
---|
1918 | ! Description: |
---|
1919 | ! ------------ |
---|
1920 | !> Calculation of the forces generated by the wind turbine |
---|
1921 | !------------------------------------------------------------------------------! |
---|
1922 | SUBROUTINE wtm_forces |
---|
1923 | |
---|
1924 | |
---|
1925 | IMPLICIT NONE |
---|
1926 | |
---|
1927 | CHARACTER (LEN=4) :: turbine_id |
---|
1928 | |
---|
1929 | INTEGER(iwp) :: i, j, k !< loop indices |
---|
1930 | INTEGER(iwp) :: inot !< turbine loop index (turbine id) |
---|
1931 | INTEGER(iwp) :: iialpha, iir !< |
---|
1932 | INTEGER(iwp) :: rseg !< |
---|
1933 | INTEGER(iwp) :: ring !< |
---|
1934 | INTEGER(iwp) :: ii, jj, kk !< |
---|
1935 | |
---|
1936 | REAL(wp) :: flag !< flag to mask topography grid points |
---|
1937 | REAL(wp) :: sin_rot, cos_rot !< |
---|
1938 | REAL(wp) :: sin_yaw, cos_yaw !< |
---|
1939 | |
---|
1940 | REAL(wp) :: aa, bb, cc, dd !< interpolation distances |
---|
1941 | REAL(wp) :: gg !< interpolation volume var |
---|
1942 | |
---|
1943 | REAL(wp) :: dist_u_3d, dist_v_3d, dist_w_3d !< smearing distances |
---|
1944 | |
---|
1945 | |
---|
1946 | ! |
---|
1947 | ! Variables for pitch control |
---|
1948 | LOGICAL :: pitch_sw = .FALSE. |
---|
1949 | |
---|
1950 | INTEGER(iwp), DIMENSION(1) :: lct = 0 |
---|
1951 | REAL(wp), DIMENSION(1) :: rad_d = 0.0_wp |
---|
1952 | |
---|
1953 | REAL(wp) :: tl_factor !< factor for tip loss correction |
---|
1954 | |
---|
1955 | |
---|
1956 | CALL cpu_log( log_point_s(61), 'wtm_forces', 'start' ) |
---|
1957 | |
---|
1958 | |
---|
1959 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
1960 | |
---|
1961 | ! |
---|
1962 | !-- Set forces to zero for each new time step: |
---|
1963 | thrust(:,:,:) = 0.0_wp |
---|
1964 | torque_y(:,:,:) = 0.0_wp |
---|
1965 | torque_z(:,:,:) = 0.0_wp |
---|
1966 | torque_total(:) = 0.0_wp |
---|
1967 | rot_tend_x(:,:,:) = 0.0_wp |
---|
1968 | rot_tend_y(:,:,:) = 0.0_wp |
---|
1969 | rot_tend_z(:,:,:) = 0.0_wp |
---|
1970 | thrust_rotor(:) = 0.0_wp |
---|
1971 | ! |
---|
1972 | !-- Loop over number of turbines: |
---|
1973 | DO inot = 1, nturbines |
---|
1974 | |
---|
1975 | cos_yaw = COS(phi_yaw(inot)) |
---|
1976 | sin_yaw = SIN(phi_yaw(inot)) |
---|
1977 | ! |
---|
1978 | !-- Loop over rings of each turbine: |
---|
1979 | |
---|
1980 | !$OMP PARALLEL PRIVATE (ring, rseg, thrust_seg, torque_seg_y, torque_seg_z, sin_rot, & |
---|
1981 | !$OMP& cos_rot, re, rbx, rby, rbz, ii, jj, kk, aa, bb, cc, dd, gg) |
---|
1982 | !$OMP DO |
---|
1983 | DO ring = 1, nrings(inot) |
---|
1984 | |
---|
1985 | thrust_seg(:) = 0.0_wp |
---|
1986 | torque_seg_y(:) = 0.0_wp |
---|
1987 | torque_seg_z(:) = 0.0_wp |
---|
1988 | ! |
---|
1989 | !-- Determine distance between each ring (center) and the hub: |
---|
1990 | cur_r = (ring - 0.5_wp) * delta_r(inot) |
---|
1991 | |
---|
1992 | ! |
---|
1993 | !-- Loop over segments of each ring of each turbine: |
---|
1994 | DO rseg = 1, nsegs(ring,inot) |
---|
1995 | ! |
---|
1996 | !-- !-----------------------------------------------------------! |
---|
1997 | !-- !-- Determine coordinates of the ring segments --! |
---|
1998 | !-- !-----------------------------------------------------------! |
---|
1999 | ! |
---|
2000 | !-- Determine angle of ring segment towards zero degree angle of |
---|
2001 | !-- rotor system (at zero degree rotor direction vectors aligned |
---|
2002 | !-- with y-axis): |
---|
2003 | phi_rotor = rseg * 2.0_wp * pi / nsegs(ring,inot) |
---|
2004 | cos_rot = COS( phi_rotor ) |
---|
2005 | sin_rot = SIN( phi_rotor ) |
---|
2006 | |
---|
2007 | !-- Now the direction vectors can be determined with respect to |
---|
2008 | !-- the yaw and tilt angle: |
---|
2009 | re(1) = cos_rot * sin_yaw |
---|
2010 | re(2) = cos_rot * cos_yaw |
---|
2011 | re(3) = sin_rot |
---|
2012 | |
---|
2013 | rote = MATMUL( rot_coord_trans(inot,:,:), re ) |
---|
2014 | ! |
---|
2015 | !-- Coordinates of the single segments (center points): |
---|
2016 | rbx(ring,rseg) = rcx(inot) + cur_r * rote(1) |
---|
2017 | rby(ring,rseg) = rcy(inot) + cur_r * rote(2) |
---|
2018 | rbz(ring,rseg) = rcz(inot) + cur_r * rote(3) |
---|
2019 | |
---|
2020 | !-- !-----------------------------------------------------------! |
---|
2021 | !-- !-- Interpolation of the velocity components from the --! |
---|
2022 | !-- !-- cartesian grid point to the coordinates of each ring --! |
---|
2023 | !-- !-- segment (follows a method used in the particle model) --! |
---|
2024 | !-- !-----------------------------------------------------------! |
---|
2025 | |
---|
2026 | u_int(inot,ring,rseg) = 0.0_wp |
---|
2027 | u_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2028 | |
---|
2029 | v_int(inot,ring,rseg) = 0.0_wp |
---|
2030 | v_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2031 | |
---|
2032 | w_int(inot,ring,rseg) = 0.0_wp |
---|
2033 | w_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2034 | |
---|
2035 | ! |
---|
2036 | !-- Interpolation of the u-component: |
---|
2037 | |
---|
2038 | ii = rbx(ring,rseg) * ddx |
---|
2039 | jj = ( rby(ring,rseg) - 0.5_wp * dy ) * ddy |
---|
2040 | kk = ( rbz(ring,rseg) + 0.5_wp * dz(1) ) / dz(1) |
---|
2041 | ! |
---|
2042 | !-- Interpolate only if all required information is available on |
---|
2043 | !-- the current PE: |
---|
2044 | IF ( ( ii >= nxl ) .AND. ( ii <= nxr ) ) THEN |
---|
2045 | IF ( ( jj >= nys ) .AND. ( jj <= nyn ) ) THEN |
---|
2046 | |
---|
2047 | aa = ( ( ii + 1 ) * dx - rbx(ring,rseg) ) * & |
---|
2048 | ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) |
---|
2049 | bb = ( rbx(ring,rseg) - ii * dx ) * & |
---|
2050 | ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) |
---|
2051 | cc = ( ( ii+1 ) * dx - rbx(ring,rseg) ) * & |
---|
2052 | ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) |
---|
2053 | dd = ( rbx(ring,rseg) - ii * dx ) * & |
---|
2054 | ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) |
---|
2055 | gg = dx * dy |
---|
2056 | |
---|
2057 | u_int_l = ( aa * u(kk,jj,ii) + & |
---|
2058 | bb * u(kk,jj,ii+1) + & |
---|
2059 | cc * u(kk,jj+1,ii) + & |
---|
2060 | dd * u(kk,jj+1,ii+1) & |
---|
2061 | ) / gg |
---|
2062 | |
---|
2063 | u_int_u = ( aa * u(kk+1,jj,ii) + & |
---|
2064 | bb * u(kk+1,jj,ii+1) + & |
---|
2065 | cc * u(kk+1,jj+1,ii) + & |
---|
2066 | dd * u(kk+1,jj+1,ii+1) & |
---|
2067 | ) / gg |
---|
2068 | |
---|
2069 | u_int_1_l(inot,ring,rseg) = u_int_l + & |
---|
2070 | ( rbz(ring,rseg) - zu(kk) ) / dz(1) * & |
---|
2071 | ( u_int_u - u_int_l ) |
---|
2072 | |
---|
2073 | ELSE |
---|
2074 | u_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2075 | ENDIF |
---|
2076 | ELSE |
---|
2077 | u_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2078 | ENDIF |
---|
2079 | |
---|
2080 | |
---|
2081 | ! |
---|
2082 | !-- Interpolation of the v-component: |
---|
2083 | ii = ( rbx(ring,rseg) - 0.5_wp * dx ) * ddx |
---|
2084 | jj = rby(ring,rseg) * ddy |
---|
2085 | kk = ( rbz(ring,rseg) + 0.5_wp * dz(1) ) / dz(1) |
---|
2086 | ! |
---|
2087 | !-- Interpolate only if all required information is available on |
---|
2088 | !-- the current PE: |
---|
2089 | IF ( ( ii >= nxl ) .AND. ( ii <= nxr ) ) THEN |
---|
2090 | IF ( ( jj >= nys ) .AND. ( jj <= nyn ) ) THEN |
---|
2091 | |
---|
2092 | aa = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & |
---|
2093 | ( ( jj + 1 ) * dy - rby(ring,rseg) ) |
---|
2094 | bb = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & |
---|
2095 | ( ( jj + 1 ) * dy - rby(ring,rseg) ) |
---|
2096 | cc = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & |
---|
2097 | ( rby(ring,rseg) - jj * dy ) |
---|
2098 | dd = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & |
---|
2099 | ( rby(ring,rseg) - jj * dy ) |
---|
2100 | gg = dx * dy |
---|
2101 | |
---|
2102 | v_int_l = ( aa * v(kk,jj,ii) + & |
---|
2103 | bb * v(kk,jj,ii+1) + & |
---|
2104 | cc * v(kk,jj+1,ii) + & |
---|
2105 | dd * v(kk,jj+1,ii+1) & |
---|
2106 | ) / gg |
---|
2107 | |
---|
2108 | v_int_u = ( aa * v(kk+1,jj,ii) + & |
---|
2109 | bb * v(kk+1,jj,ii+1) + & |
---|
2110 | cc * v(kk+1,jj+1,ii) + & |
---|
2111 | dd * v(kk+1,jj+1,ii+1) & |
---|
2112 | ) / gg |
---|
2113 | |
---|
2114 | v_int_1_l(inot,ring,rseg) = v_int_l + & |
---|
2115 | ( rbz(ring,rseg) - zu(kk) ) / dz(1) * & |
---|
2116 | ( v_int_u - v_int_l ) |
---|
2117 | |
---|
2118 | ELSE |
---|
2119 | v_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2120 | ENDIF |
---|
2121 | ELSE |
---|
2122 | v_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2123 | ENDIF |
---|
2124 | |
---|
2125 | |
---|
2126 | ! |
---|
2127 | !-- Interpolation of the w-component: |
---|
2128 | ii = ( rbx(ring,rseg) - 0.5_wp * dx ) * ddx |
---|
2129 | jj = ( rby(ring,rseg) - 0.5_wp * dy ) * ddy |
---|
2130 | kk = rbz(ring,rseg) / dz(1) |
---|
2131 | ! |
---|
2132 | !-- Interpolate only if all required information is available on |
---|
2133 | !-- the current PE: |
---|
2134 | IF ( ( ii >= nxl ) .AND. ( ii <= nxr ) ) THEN |
---|
2135 | IF ( ( jj >= nys ) .AND. ( jj <= nyn ) ) THEN |
---|
2136 | |
---|
2137 | aa = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & |
---|
2138 | ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) |
---|
2139 | bb = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & |
---|
2140 | ( ( jj + 1 + 0.5_wp ) * dy - rby(ring,rseg) ) |
---|
2141 | cc = ( ( ii + 1 + 0.5_wp ) * dx - rbx(ring,rseg) ) * & |
---|
2142 | ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) |
---|
2143 | dd = ( rbx(ring,rseg) - ( ii + 0.5_wp ) * dx ) * & |
---|
2144 | ( rby(ring,rseg) - ( jj + 0.5_wp ) * dy ) |
---|
2145 | gg = dx * dy |
---|
2146 | |
---|
2147 | w_int_l = ( aa * w(kk,jj,ii) + & |
---|
2148 | bb * w(kk,jj,ii+1) + & |
---|
2149 | cc * w(kk,jj+1,ii) + & |
---|
2150 | dd * w(kk,jj+1,ii+1) & |
---|
2151 | ) / gg |
---|
2152 | |
---|
2153 | w_int_u = ( aa * w(kk+1,jj,ii) + & |
---|
2154 | bb * w(kk+1,jj,ii+1) + & |
---|
2155 | cc * w(kk+1,jj+1,ii) + & |
---|
2156 | dd * w(kk+1,jj+1,ii+1) & |
---|
2157 | ) / gg |
---|
2158 | |
---|
2159 | w_int_1_l(inot,ring,rseg) = w_int_l + & |
---|
2160 | ( rbz(ring,rseg) - zw(kk) ) / dz(1) * & |
---|
2161 | ( w_int_u - w_int_l ) |
---|
2162 | ELSE |
---|
2163 | w_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2164 | ENDIF |
---|
2165 | ELSE |
---|
2166 | w_int_1_l(inot,ring,rseg) = 0.0_wp |
---|
2167 | ENDIF |
---|
2168 | |
---|
2169 | ENDDO |
---|
2170 | ENDDO |
---|
2171 | !$OMP END PARALLEL |
---|
2172 | |
---|
2173 | ENDDO |
---|
2174 | |
---|
2175 | ! |
---|
2176 | !-- Exchange between PEs (information required on each PE): |
---|
2177 | #if defined( __parallel ) |
---|
2178 | CALL MPI_ALLREDUCE( u_int_1_l, u_int, nturbines * MAXVAL(nrings) * & |
---|
2179 | MAXVAL(nsegs), MPI_REAL, MPI_SUM, comm2d, ierr ) |
---|
2180 | CALL MPI_ALLREDUCE( v_int_1_l, v_int, nturbines * MAXVAL(nrings) * & |
---|
2181 | MAXVAL(nsegs), MPI_REAL, MPI_SUM, comm2d, ierr ) |
---|
2182 | CALL MPI_ALLREDUCE( w_int_1_l, w_int, nturbines * MAXVAL(nrings) * & |
---|
2183 | MAXVAL(nsegs), MPI_REAL, MPI_SUM, comm2d, ierr ) |
---|
2184 | #else |
---|
2185 | u_int = u_int_1_l |
---|
2186 | v_int = v_int_1_l |
---|
2187 | w_int = w_int_1_l |
---|
2188 | #endif |
---|
2189 | |
---|
2190 | |
---|
2191 | ! |
---|
2192 | !-- Loop over number of turbines: |
---|
2193 | |
---|
2194 | DO inot = 1, nturbines |
---|
2195 | pit_loop: DO |
---|
2196 | |
---|
2197 | IF ( pitch_sw ) THEN |
---|
2198 | torque_total(inot) = 0.0_wp |
---|
2199 | thrust_rotor(inot) = 0.0_wp |
---|
2200 | pitch_add(inot) = pitch_add(inot) + 0.25_wp |
---|
2201 | ! IF ( myid == 0 ) PRINT*, 'Pitch', inot, pitch_add(inot) |
---|
2202 | ELSE |
---|
2203 | cos_yaw = COS(phi_yaw(inot)) |
---|
2204 | sin_yaw = SIN(phi_yaw(inot)) |
---|
2205 | IF ( pitch_control ) THEN |
---|
2206 | pitch_add(inot) = MAX(pitch_add_old(inot) - pitch_rate * & |
---|
2207 | dt_3d , 0.0_wp ) |
---|
2208 | ENDIF |
---|
2209 | ENDIF |
---|
2210 | |
---|
2211 | ! |
---|
2212 | !-- Loop over rings of each turbine: |
---|
2213 | !$OMP PARALLEL PRIVATE (ring, rseg, sin_rot, cos_rot, re, rea, ren, rote, rota, rotn, & |
---|
2214 | !$OMP& vtheta, phi_rel, lct, rad_d, alpha_attack, vrel, & |
---|
2215 | !$OMP& chord, iialpha, iir, turb_cl, tl_factor, thrust_seg, & |
---|
2216 | !$OMP& torque_seg_y, turb_cd, torque_seg_z, thrust_ring, & |
---|
2217 | !$OMP& torque_ring_y, torque_ring_z) |
---|
2218 | !$OMP DO |
---|
2219 | DO ring = 1, nrings(inot) |
---|
2220 | ! |
---|
2221 | !-- Determine distance between each ring (center) and the hub: |
---|
2222 | cur_r = (ring - 0.5_wp) * delta_r(inot) |
---|
2223 | ! |
---|
2224 | !-- Loop over segments of each ring of each turbine: |
---|
2225 | DO rseg = 1, nsegs(ring,inot) |
---|
2226 | ! |
---|
2227 | !-- Determine angle of ring segment towards zero degree angle of |
---|
2228 | !-- rotor system (at zero degree rotor direction vectors aligned |
---|
2229 | !-- with y-axis): |
---|
2230 | phi_rotor = rseg * 2.0_wp * pi / nsegs(ring,inot) |
---|
2231 | cos_rot = COS(phi_rotor) |
---|
2232 | sin_rot = SIN(phi_rotor) |
---|
2233 | ! |
---|
2234 | !-- Now the direction vectors can be determined with respect to |
---|
2235 | !-- the yaw and tilt angle: |
---|
2236 | re(1) = cos_rot * sin_yaw |
---|
2237 | re(2) = cos_rot * cos_yaw |
---|
2238 | re(3) = sin_rot |
---|
2239 | |
---|
2240 | ! The current unit vector in azimuthal direction: |
---|
2241 | rea(1) = - sin_rot * sin_yaw |
---|
2242 | rea(2) = - sin_rot * cos_yaw |
---|
2243 | rea(3) = cos_rot |
---|
2244 | |
---|
2245 | ! |
---|
2246 | !-- To respect the yawing angle for the calculations of |
---|
2247 | !-- velocities and forces the unit vectors perpendicular to the |
---|
2248 | !-- rotor area in direction of the positive yaw angle are defined: |
---|
2249 | ren(1) = cos_yaw |
---|
2250 | ren(2) = - sin_yaw |
---|
2251 | ren(3) = 0.0_wp |
---|
2252 | ! |
---|
2253 | !-- Multiplication with the coordinate transformation matrix |
---|
2254 | !-- gives the final unit vector with consideration of the rotor |
---|
2255 | !-- tilt: |
---|
2256 | rote = MATMUL( rot_coord_trans(inot,:,:), re ) |
---|
2257 | rota = MATMUL( rot_coord_trans(inot,:,:), rea ) |
---|
2258 | rotn = MATMUL( rot_coord_trans(inot,:,:), ren ) |
---|
2259 | ! |
---|
2260 | !-- Coordinates of the single segments (center points): |
---|
2261 | rbx(ring,rseg) = rcx(inot) + cur_r * rote(1) |
---|
2262 | |
---|
2263 | rby(ring,rseg) = rcy(inot) + cur_r * rote(2) |
---|
2264 | |
---|
2265 | rbz(ring,rseg) = rcz(inot) + cur_r * rote(3) |
---|
2266 | |
---|
2267 | ! |
---|
2268 | !-- !-----------------------------------------------------------! |
---|
2269 | !-- !-- Calculation of various angles and relative velocities --! |
---|
2270 | !-- !-----------------------------------------------------------! |
---|
2271 | ! |
---|
2272 | !-- In the following the 3D-velocity field is projected its |
---|
2273 | !-- components perpendicular and parallel to the rotor area |
---|
2274 | !-- The calculation of forces will be done in the rotor- |
---|
2275 | !-- coordinates y' and z. |
---|
2276 | !-- The yaw angle will be reintroduced when the force is applied |
---|
2277 | !-- on the hydrodynamic equations |
---|
2278 | ! |
---|
2279 | !-- Projection of the xy-velocities relative to the rotor area |
---|
2280 | ! |
---|
2281 | !-- Velocity perpendicular to the rotor area: |
---|
2282 | u_rot = u_int(inot,ring,rseg)*rotn(1) + & |
---|
2283 | v_int(inot,ring,rseg)*rotn(2) + & |
---|
2284 | w_int(inot,ring,rseg)*rotn(3) |
---|
2285 | ! |
---|
2286 | !-- Projection of the 3D-velocity vector in the azimuthal |
---|
2287 | !-- direction: |
---|
2288 | vtheta(rseg) = rota(1) * u_int(inot,ring,rseg) + & |
---|
2289 | rota(2) * v_int(inot,ring,rseg) + & |
---|
2290 | rota(3) * w_int(inot,ring,rseg) |
---|
2291 | ! |
---|
2292 | !-- Determination of the angle phi_rel between the rotor plane |
---|
2293 | !-- and the direction of the flow relative to the rotor: |
---|
2294 | |
---|
2295 | phi_rel(rseg) = ATAN2( u_rot , & |
---|
2296 | ( omega_rot(inot) * cur_r - & |
---|
2297 | vtheta(rseg) ) ) |
---|
2298 | |
---|
2299 | ! |
---|
2300 | !-- Interpolation of the local pitch angle from tabulated values |
---|
2301 | !-- to the current radial position: |
---|
2302 | |
---|
2303 | lct=minloc(ABS(cur_r-lrd)) |
---|
2304 | rad_d=cur_r-lrd(lct) |
---|
2305 | |
---|
2306 | IF (cur_r == 0.0_wp) THEN |
---|
2307 | alpha_attack(rseg) = 0.0_wp |
---|
2308 | ELSE IF (cur_r >= lrd(size(ard))) THEN |
---|
2309 | alpha_attack(rseg) = ( ard(size(ard)) + & |
---|
2310 | ard(size(ard)-1) ) / 2.0_wp |
---|
2311 | ELSE |
---|
2312 | alpha_attack(rseg) = ( ard(lct(1)) * & |
---|
2313 | ( ( lrd(lct(1)+1) - cur_r ) / & |
---|
2314 | ( lrd(lct(1)+1) - lrd(lct(1)) ) & |
---|
2315 | ) ) + ( ard(lct(1)+1) * & |
---|
2316 | ( ( cur_r - lrd(lct(1)) ) / & |
---|
2317 | ( lrd(lct(1)+1) - lrd(lct(1)) ) ) ) |
---|
2318 | ENDIF |
---|
2319 | |
---|
2320 | ! |
---|
2321 | !-- In Fortran radian instead of degree is used as unit for all |
---|
2322 | !-- angles. Therefore, a transformation from angles given in |
---|
2323 | !-- degree to angles given in radian is necessary here: |
---|
2324 | alpha_attack(rseg) = alpha_attack(rseg) * & |
---|
2325 | ( (2.0_wp*pi) / 360.0_wp ) |
---|
2326 | ! |
---|
2327 | !-- Substraction of the local pitch angle to obtain the local |
---|
2328 | !-- angle of attack: |
---|
2329 | alpha_attack(rseg) = phi_rel(rseg) - alpha_attack(rseg) |
---|
2330 | ! |
---|
2331 | !-- Preliminary transformation back from angles given in radian |
---|
2332 | !-- to angles given in degree: |
---|
2333 | alpha_attack(rseg) = alpha_attack(rseg) * & |
---|
2334 | ( 360.0_wp / (2.0_wp*pi) ) |
---|
2335 | ! |
---|
2336 | !-- Correct with collective pitch angle: |
---|
2337 | alpha_attack(rseg) = alpha_attack(rseg) - pitch_add(inot) |
---|
2338 | |
---|
2339 | ! |
---|
2340 | !-- Determination of the magnitude of the flow velocity relative |
---|
2341 | !-- to the rotor: |
---|
2342 | vrel(rseg) = SQRT( u_rot**2 + & |
---|
2343 | ( omega_rot(inot) * cur_r - & |
---|
2344 | vtheta(rseg) )**2 ) |
---|
2345 | |
---|
2346 | ! |
---|
2347 | !-- !-----------------------------------------------------------! |
---|
2348 | !-- !-- Interpolation of chord as well as lift and drag --! |
---|
2349 | !-- !-- coefficients from tabulated values --! |
---|
2350 | !-- !-----------------------------------------------------------! |
---|
2351 | |
---|
2352 | ! |
---|
2353 | !-- Interpolation of the chord_length from tabulated values to |
---|
2354 | !-- the current radial position: |
---|
2355 | |
---|
2356 | IF (cur_r == 0.0_wp) THEN |
---|
2357 | chord(rseg) = 0.0_wp |
---|
2358 | ELSE IF (cur_r >= lrd(size(crd))) THEN |
---|
2359 | chord(rseg) = (crd(size(crd)) + ard(size(crd)-1)) / 2.0_wp |
---|
2360 | ELSE |
---|
2361 | chord(rseg) = ( crd(lct(1)) * & |
---|
2362 | ( ( lrd(lct(1)+1) - cur_r ) / & |
---|
2363 | ( lrd(lct(1)+1) - lrd(lct(1)) ) ) ) + & |
---|
2364 | ( crd(lct(1)+1) * & |
---|
2365 | ( ( cur_r-lrd(lct(1)) ) / & |
---|
2366 | ( lrd(lct(1)+1) - lrd(lct(1)) ) ) ) |
---|
2367 | ENDIF |
---|
2368 | |
---|
2369 | ! |
---|
2370 | !-- Determine index of current angle of attack, needed for |
---|
2371 | !-- finding the appropriate interpolated values of the lift and |
---|
2372 | !-- drag coefficients (-180.0 degrees = 1, +180.0 degrees = 3601, |
---|
2373 | !-- so one index every 0.1 degrees): |
---|
2374 | iialpha = CEILING( ( alpha_attack(rseg) + 180.0_wp ) & |
---|
2375 | * ( 1.0_wp / accu_cl_cd_tab ) ) + 1.0_wp |
---|
2376 | ! |
---|
2377 | !-- Determine index of current radial position, needed for |
---|
2378 | !-- finding the appropriate interpolated values of the lift and |
---|
2379 | !-- drag coefficients (one index every 0.1 m): |
---|
2380 | iir = CEILING( cur_r * 10.0_wp ) |
---|
2381 | ! |
---|
2382 | !-- Read in interpolated values of the lift and drag coefficients |
---|
2383 | !-- for the current radial position and angle of attack: |
---|
2384 | turb_cl(rseg) = turb_cl_tab(iialpha,iir) |
---|
2385 | turb_cd(rseg) = turb_cd_tab(iialpha,iir) |
---|
2386 | |
---|
2387 | ! |
---|
2388 | !-- Final transformation back from angles given in degree to |
---|
2389 | !-- angles given in radian: |
---|
2390 | alpha_attack(rseg) = alpha_attack(rseg) * & |
---|
2391 | ( (2.0_wp*pi) / 360.0_wp ) |
---|
2392 | |
---|
2393 | IF ( tl_cor ) THEN |
---|
2394 | |
---|
2395 | !-- Tip loss correction following Schito |
---|
2396 | !-- Schito applies the tip loss correction only to the lift force |
---|
2397 | !-- Therefore, the tip loss correction is only applied to the lift |
---|
2398 | !-- coefficient and not to the drag coefficient in our case |
---|
2399 | !-- |
---|
2400 | tl_factor = ( 2.0 / pi ) * & |
---|
2401 | ACOS( EXP( -1.0 * ( 3.0 * ( rr(inot) - cur_r ) / & |
---|
2402 | ( 2.0 * cur_r * abs( sin( phi_rel(rseg) ) ) ) ) ) ) |
---|
2403 | |
---|
2404 | turb_cl(rseg) = tl_factor * turb_cl(rseg) |
---|
2405 | |
---|
2406 | ENDIF |
---|
2407 | ! |
---|
2408 | !-- !-----------------------------------------------------! |
---|
2409 | !-- !-- Calculation of the forces --! |
---|
2410 | !-- !-----------------------------------------------------! |
---|
2411 | |
---|
2412 | ! |
---|
2413 | !-- Calculate the pre_factor for the thrust and torque forces: |
---|
2414 | |
---|
2415 | pre_factor = 0.5_wp * (vrel(rseg)**2) * 3.0_wp * & |
---|
2416 | chord(rseg) * delta_r(inot) / nsegs(ring,inot) |
---|
2417 | |
---|
2418 | ! |
---|
2419 | !-- Calculate the thrust force (x-component of the total force) |
---|
2420 | !-- for each ring segment: |
---|
2421 | thrust_seg(rseg) = pre_factor * & |
---|
2422 | ( turb_cl(rseg) * COS(phi_rel(rseg)) + & |
---|
2423 | turb_cd(rseg) * SIN(phi_rel(rseg)) ) |
---|
2424 | |
---|
2425 | ! |
---|
2426 | !-- Determination of the second of the additional forces acting |
---|
2427 | !-- on the flow in the azimuthal direction: force vector as basis |
---|
2428 | !-- for torque (torque itself would be the vector product of the |
---|
2429 | !-- radius vector and the force vector): |
---|
2430 | torque_seg = pre_factor * & |
---|
2431 | ( turb_cl(rseg) * SIN(phi_rel(rseg)) - & |
---|
2432 | turb_cd(rseg) * COS(phi_rel(rseg)) ) |
---|
2433 | ! |
---|
2434 | !-- Decomposition of the force vector into two parts: |
---|
2435 | !-- One acting along the y-direction and one acting along the |
---|
2436 | !-- z-direction of the rotor coordinate system: |
---|
2437 | |
---|
2438 | torque_seg_y(rseg) = -torque_seg * sin_rot |
---|
2439 | torque_seg_z(rseg) = torque_seg * cos_rot |
---|
2440 | |
---|
2441 | ! |
---|
2442 | !-- Add the segment thrust to the thrust of the whole rotor |
---|
2443 | !$OMP CRITICAL |
---|
2444 | thrust_rotor(inot) = thrust_rotor(inot) + & |
---|
2445 | thrust_seg(rseg) |
---|
2446 | |
---|
2447 | |
---|
2448 | torque_total(inot) = torque_total(inot) + (torque_seg * cur_r) |
---|
2449 | !$OMP END CRITICAL |
---|
2450 | |
---|
2451 | ENDDO !-- end of loop over ring segments |
---|
2452 | |
---|
2453 | ! |
---|
2454 | !-- Restore the forces into arrays containing all the segments of |
---|
2455 | !-- each ring: |
---|
2456 | thrust_ring(ring,:) = thrust_seg(:) |
---|
2457 | torque_ring_y(ring,:) = torque_seg_y(:) |
---|
2458 | torque_ring_z(ring,:) = torque_seg_z(:) |
---|
2459 | |
---|
2460 | |
---|
2461 | ENDDO !-- end of loop over rings |
---|
2462 | !$OMP END PARALLEL |
---|
2463 | |
---|
2464 | |
---|
2465 | CALL cpu_log( log_point_s(62), 'wtm_controller', 'start' ) |
---|
2466 | |
---|
2467 | |
---|
2468 | IF ( speed_control ) THEN |
---|
2469 | ! |
---|
2470 | !-- Calculation of the current generator speed for rotor speed control |
---|
2471 | |
---|
2472 | ! |
---|
2473 | !-- The acceleration of the rotor speed is calculated from |
---|
2474 | !-- the force balance of the accelerating torque |
---|
2475 | !-- and the torque of the rotating rotor and generator |
---|
2476 | om_rate = ( torque_total(inot) * air_dens * gear_eff - & |
---|
2477 | gear_ratio * torque_gen_old(inot) ) / & |
---|
2478 | ( inertia_rot + & |
---|
2479 | gear_ratio * gear_ratio * inertia_gen ) * dt_3d |
---|
2480 | |
---|
2481 | ! |
---|
2482 | !-- The generator speed is given by the product of gear gear_ratio |
---|
2483 | !-- and rotor speed |
---|
2484 | omega_gen(inot) = gear_ratio * ( omega_rot(inot) + om_rate ) |
---|
2485 | |
---|
2486 | ENDIF |
---|
2487 | |
---|
2488 | IF ( pitch_control ) THEN |
---|
2489 | |
---|
2490 | ! |
---|
2491 | !-- If the current generator speed is above rated, the pitch is not |
---|
2492 | !-- saturated and the change from the last time step is within the |
---|
2493 | !-- maximum pitch rate, then the pitch loop is repeated with a pitch |
---|
2494 | !-- gain |
---|
2495 | IF ( ( omega_gen(inot) > rated_genspeed ) .AND. & |
---|
2496 | ( pitch_add(inot) < 25.0_wp ) .AND. & |
---|
2497 | ( pitch_add(inot) < pitch_add_old(inot) + & |
---|
2498 | pitch_rate * dt_3d ) ) THEN |
---|
2499 | pitch_sw = .TRUE. |
---|
2500 | ! |
---|
2501 | !-- Go back to beginning of pit_loop |
---|
2502 | CYCLE pit_loop |
---|
2503 | ENDIF |
---|
2504 | |
---|
2505 | ! |
---|
2506 | !-- The current pitch is saved for the next time step |
---|
2507 | pitch_add_old(inot) = pitch_add(inot) |
---|
2508 | pitch_sw = .FALSE. |
---|
2509 | ENDIF |
---|
2510 | EXIT pit_loop |
---|
2511 | ENDDO pit_loop ! Recursive pitch control loop |
---|
2512 | |
---|
2513 | |
---|
2514 | ! |
---|
2515 | !-- Call the rotor speed controller |
---|
2516 | |
---|
2517 | IF ( speed_control ) THEN |
---|
2518 | ! |
---|
2519 | !-- Find processor at i_hub, j_hub |
---|
2520 | IF ( ( nxl <= i_hub(inot) ) .AND. ( nxr >= i_hub(inot) ) ) & |
---|
2521 | THEN |
---|
2522 | IF ( ( nys <= j_hub(inot) ) .AND. ( nyn >= j_hub(inot) ) )& |
---|
2523 | THEN |
---|
2524 | CALL wtm_speed_control( inot ) |
---|
2525 | ENDIF |
---|
2526 | ENDIF |
---|
2527 | |
---|
2528 | ENDIF |
---|
2529 | |
---|
2530 | |
---|
2531 | CALL cpu_log( log_point_s(62), 'wtm_controller', 'stop' ) |
---|
2532 | |
---|
2533 | CALL cpu_log( log_point_s(63), 'wtm_smearing', 'start' ) |
---|
2534 | |
---|
2535 | |
---|
2536 | !-- !-----------------------------------------------------------------! |
---|
2537 | !-- !-- Regularization kernel --! |
---|
2538 | !-- !-- Smearing of the forces and interpolation to cartesian grid --! |
---|
2539 | !-- !-----------------------------------------------------------------! |
---|
2540 | ! |
---|
2541 | !-- The aerodynamic blade forces need to be distributed smoothly on |
---|
2542 | !-- several mesh points in order to avoid singular behaviour |
---|
2543 | ! |
---|
2544 | !-- Summation over sum of weighted forces. The weighting factor |
---|
2545 | !-- (calculated in user_init) includes information on the distance |
---|
2546 | !-- between the center of the grid cell and the rotor segment under |
---|
2547 | !-- consideration |
---|
2548 | ! |
---|
2549 | !-- To save computing time, apply smearing only for the relevant part |
---|
2550 | !-- of the model domain: |
---|
2551 | ! |
---|
2552 | !-- |
---|
2553 | !-- Calculation of the boundaries: |
---|
2554 | i_smear(inot) = CEILING( ( rr(inot) * ABS( roty(inot,1) ) + & |
---|
2555 | eps_min ) / dx ) |
---|
2556 | j_smear(inot) = CEILING( ( rr(inot) * ABS( roty(inot,2) ) + & |
---|
2557 | eps_min ) / dy ) |
---|
2558 | |
---|
2559 | !$OMP PARALLEL PRIVATE (i, j, k, ring, rseg, flag, dist_u_3d, dist_v_3d, dist_w_3d) |
---|
2560 | !$OMP DO |
---|
2561 | DO i = MAX( nxl, i_hub(inot) - i_smear(inot) ), & |
---|
2562 | MIN( nxr, i_hub(inot) + i_smear(inot) ) |
---|
2563 | DO j = MAX( nys, j_hub(inot) - j_smear(inot) ), & |
---|
2564 | MIN( nyn, j_hub(inot) + j_smear(inot) ) |
---|
2565 | ! DO k = MAX( nzb_u_inner(j,i)+1, k_hub(inot) - k_smear(inot) ), & |
---|
2566 | ! k_hub(inot) + k_smear(inot) |
---|
2567 | DO k = nzb+1, k_hub(inot) + k_smear(inot) |
---|
2568 | DO ring = 1, nrings(inot) |
---|
2569 | DO rseg = 1, nsegs(ring,inot) |
---|
2570 | ! |
---|
2571 | !-- Predetermine flag to mask topography |
---|
2572 | flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 1 ) ) |
---|
2573 | |
---|
2574 | ! |
---|
2575 | !-- Determine the square of the distance between the |
---|
2576 | !-- current grid point and each rotor area segment: |
---|
2577 | dist_u_3d = ( i * dx - rbx(ring,rseg) )**2 + & |
---|
2578 | ( j * dy + 0.5_wp * dy - rby(ring,rseg) )**2 + & |
---|
2579 | ( k * dz(1) - 0.5_wp * dz(1) - rbz(ring,rseg) )**2 |
---|
2580 | dist_v_3d = ( i * dx + 0.5_wp * dx - rbx(ring,rseg) )**2 + & |
---|
2581 | ( j * dy - rby(ring,rseg) )**2 + & |
---|
2582 | ( k * dz(1) - 0.5_wp * dz(1) - rbz(ring,rseg) )**2 |
---|
2583 | dist_w_3d = ( i * dx + 0.5_wp * dx - rbx(ring,rseg) )**2 + & |
---|
2584 | ( j * dy + 0.5_wp * dy - rby(ring,rseg) )**2 + & |
---|
2585 | ( k * dz(1) - rbz(ring,rseg) )**2 |
---|
2586 | |
---|
2587 | ! |
---|
2588 | !-- 3D-smearing of the forces with a polynomial function |
---|
2589 | !-- (much faster than the old Gaussian function), using |
---|
2590 | !-- some parameters that have been calculated in user_init. |
---|
2591 | !-- The function is only similar to Gaussian function for |
---|
2592 | !-- squared distances <= eps_min2: |
---|
2593 | IF ( dist_u_3d <= eps_min2 ) THEN |
---|
2594 | thrust(k,j,i) = thrust(k,j,i) + & |
---|
2595 | thrust_ring(ring,rseg) * & |
---|
2596 | ( ( pol_a * dist_u_3d - pol_b ) * & |
---|
2597 | dist_u_3d + 1.0_wp ) * eps_factor *& |
---|
2598 | flag |
---|
2599 | ENDIF |
---|
2600 | IF ( dist_v_3d <= eps_min2 ) THEN |
---|
2601 | torque_y(k,j,i) = torque_y(k,j,i) + & |
---|
2602 | torque_ring_y(ring,rseg) * & |
---|
2603 | ( ( pol_a * dist_v_3d - pol_b ) * & |
---|
2604 | dist_v_3d + 1.0_wp ) * eps_factor * & |
---|
2605 | flag |
---|
2606 | ENDIF |
---|
2607 | IF ( dist_w_3d <= eps_min2 ) THEN |
---|
2608 | torque_z(k,j,i) = torque_z(k,j,i) + & |
---|
2609 | torque_ring_z(ring,rseg) * & |
---|
2610 | ( ( pol_a * dist_w_3d - pol_b ) * & |
---|
2611 | dist_w_3d + 1.0_wp ) * eps_factor * & |
---|
2612 | flag |
---|
2613 | ENDIF |
---|
2614 | |
---|
2615 | ENDDO ! End of loop over rseg |
---|
2616 | ENDDO ! End of loop over ring |
---|
2617 | |
---|
2618 | ! |
---|
2619 | !-- Rotation of force components: |
---|
2620 | rot_tend_x(k,j,i) = rot_tend_x(k,j,i) + ( & |
---|
2621 | thrust(k,j,i)*rotx(inot,1) + & |
---|
2622 | torque_y(k,j,i)*roty(inot,1) + & |
---|
2623 | torque_z(k,j,i)*rotz(inot,1) & |
---|
2624 | ) * flag |
---|
2625 | |
---|
2626 | rot_tend_y(k,j,i) = rot_tend_y(k,j,i) + ( & |
---|
2627 | thrust(k,j,i)*rotx(inot,2) + & |
---|
2628 | torque_y(k,j,i)*roty(inot,2) + & |
---|
2629 | torque_z(k,j,i)*rotz(inot,2) & |
---|
2630 | ) * flag |
---|
2631 | |
---|
2632 | rot_tend_z(k,j,i) = rot_tend_z(k,j,i) + ( & |
---|
2633 | thrust(k,j,i)*rotx(inot,3) + & |
---|
2634 | torque_y(k,j,i)*roty(inot,3) + & |
---|
2635 | torque_z(k,j,i)*rotz(inot,3) & |
---|
2636 | ) * flag |
---|
2637 | |
---|
2638 | ENDDO ! End of loop over k |
---|
2639 | ENDDO ! End of loop over j |
---|
2640 | ENDDO ! End of loop over i |
---|
2641 | !$OMP END PARALLEL |
---|
2642 | |
---|
2643 | CALL cpu_log( log_point_s(63), 'wtm_smearing', 'stop' ) |
---|
2644 | |
---|
2645 | ENDDO !-- end of loop over turbines |
---|
2646 | |
---|
2647 | |
---|
2648 | IF ( yaw_control ) THEN |
---|
2649 | ! |
---|
2650 | !-- Allocate arrays for yaw control at first call |
---|
2651 | !-- Can't be allocated before dt_3d is set |
---|
2652 | IF ( start_up ) THEN |
---|
2653 | WDLON = MAX( 1 , NINT( 30.0_wp / dt_3d ) ) ! 30s running mean array |
---|
2654 | ALLOCATE( wd30(1:nturbines,1:WDLON) ) |
---|
2655 | wd30 = 999.0_wp ! Set to dummy value |
---|
2656 | ALLOCATE( wd30_l(1:WDLON) ) |
---|
2657 | |
---|
2658 | WDSHO = MAX( 1 , NINT( 2.0_wp / dt_3d ) ) ! 2s running mean array |
---|
2659 | ALLOCATE( wd2(1:nturbines,1:WDSHO) ) |
---|
2660 | wd2 = 999.0_wp ! Set to dummy value |
---|
2661 | ALLOCATE( wd2_l(1:WDSHO) ) |
---|
2662 | start_up = .FALSE. |
---|
2663 | ENDIF |
---|
2664 | |
---|
2665 | ! |
---|
2666 | !-- Calculate the inflow wind speed |
---|
2667 | !-- |
---|
2668 | !-- Loop over number of turbines: |
---|
2669 | DO inot = 1, nturbines |
---|
2670 | ! |
---|
2671 | !-- Find processor at i_hub, j_hub |
---|
2672 | IF ( ( nxl <= i_hub(inot) ) .AND. ( nxr >= i_hub(inot) ) ) & |
---|
2673 | THEN |
---|
2674 | IF ( ( nys <= j_hub(inot) ) .AND. ( nyn >= j_hub(inot) ) )& |
---|
2675 | THEN |
---|
2676 | |
---|
2677 | u_inflow_l(inot) = u(k_hub(inot),j_hub(inot),i_hub(inot)) |
---|
2678 | |
---|
2679 | wdir_l(inot) = -1.0_wp * ATAN2( & |
---|
2680 | 0.5_wp * ( v(k_hub(inot),j_hub(inot),i_hub(inot)+1) + & |
---|
2681 | v(k_hub(inot),j_hub(inot),i_hub(inot)) ) , & |
---|
2682 | 0.5_wp * ( u(k_hub(inot),j_hub(inot)+1,i_hub(inot)) + & |
---|
2683 | u(k_hub(inot),j_hub(inot),i_hub(inot)) ) ) |
---|
2684 | |
---|
2685 | CALL wtm_yawcontrol( inot ) |
---|
2686 | |
---|
2687 | phi_yaw_l(inot) = phi_yaw(inot) |
---|
2688 | |
---|
2689 | ENDIF |
---|
2690 | ENDIF |
---|
2691 | |
---|
2692 | ENDDO !-- end of loop over turbines |
---|
2693 | |
---|
2694 | ! |
---|
2695 | !-- Transfer of information to the other cpus |
---|
2696 | #if defined( __parallel ) |
---|
2697 | CALL MPI_ALLREDUCE( u_inflow_l, u_inflow, nturbines, MPI_REAL, & |
---|
2698 | MPI_SUM, comm2d, ierr ) |
---|
2699 | CALL MPI_ALLREDUCE( wdir_l, wdir, nturbines, MPI_REAL, MPI_SUM, & |
---|
2700 | comm2d, ierr ) |
---|
2701 | CALL MPI_ALLREDUCE( phi_yaw_l, phi_yaw, nturbines, MPI_REAL, & |
---|
2702 | MPI_SUM, comm2d, ierr ) |
---|
2703 | #else |
---|
2704 | u_inflow = u_inflow_l |
---|
2705 | wdir = wdir_l |
---|
2706 | phi_yaw = phi_yaw_l |
---|
2707 | |
---|
2708 | |
---|
2709 | #endif |
---|
2710 | DO inot = 1, nturbines |
---|
2711 | ! |
---|
2712 | !-- Update rotor orientation |
---|
2713 | CALL wtm_rotate_rotor( inot ) |
---|
2714 | |
---|
2715 | ENDDO ! End of loop over turbines |
---|
2716 | |
---|
2717 | ENDIF ! end of yaw control |
---|
2718 | |
---|
2719 | IF ( speed_control ) THEN |
---|
2720 | ! |
---|
2721 | !-- Transfer of information to the other cpus |
---|
2722 | ! CALL MPI_ALLREDUCE( omega_gen, omega_gen_old, nturbines, & |
---|
2723 | ! MPI_REAL,MPI_SUM, comm2d, ierr ) |
---|
2724 | #if defined( __parallel ) |
---|
2725 | CALL MPI_ALLREDUCE( torque_gen, torque_gen_old, nturbines, & |
---|
2726 | MPI_REAL, MPI_SUM, comm2d, ierr ) |
---|
2727 | CALL MPI_ALLREDUCE( omega_rot_l, omega_rot, nturbines, & |
---|
2728 | MPI_REAL, MPI_SUM, comm2d, ierr ) |
---|
2729 | CALL MPI_ALLREDUCE( omega_gen_f, omega_gen_f_old, nturbines, & |
---|
2730 | MPI_REAL, MPI_SUM, comm2d, ierr ) |
---|
2731 | #else |
---|
2732 | torque_gen_old = torque_gen |
---|
2733 | omega_rot = omega_rot_l |
---|
2734 | omega_gen_f_old = omega_gen_f |
---|
2735 | #endif |
---|
2736 | |
---|
2737 | ENDIF |
---|
2738 | |
---|
2739 | |
---|
2740 | |
---|
2741 | |
---|
2742 | DO inot = 1, nturbines |
---|
2743 | |
---|
2744 | |
---|
2745 | |
---|
2746 | IF ( myid == 0 ) THEN |
---|
2747 | IF ( openfile_turb_mod(400+inot)%opened ) THEN |
---|
2748 | WRITE ( 400+inot, 106 ) time_since_reference_point, omega_rot(inot), & |
---|
2749 | omega_gen(inot), torque_gen_old(inot), & |
---|
2750 | torque_total(inot), pitch_add(inot), & |
---|
2751 | torque_gen_old(inot)*omega_gen(inot)*gen_eff, & |
---|
2752 | torque_total(inot)*omega_rot(inot)*air_dens, & |
---|
2753 | thrust_rotor(inot), & |
---|
2754 | wdir(inot)*180.0_wp/pi, & |
---|
2755 | (phi_yaw(inot))*180.0_wp/pi |
---|
2756 | |
---|
2757 | ELSE |
---|
2758 | |
---|
2759 | WRITE ( turbine_id,'(A2,I2.2)') '_T', inot |
---|
2760 | OPEN ( 400+inot, FILE=( 'WTM_OUTPUT_DATA' // & |
---|
2761 | TRIM( coupling_char ) // & |
---|
2762 | turbine_id ), FORM='FORMATTED' ) |
---|
2763 | WRITE ( 400+inot, 105 ) inot |
---|
2764 | WRITE ( 400+inot, 106 ) time_since_reference_point, omega_rot(inot), & |
---|
2765 | omega_gen(inot), torque_gen_old(inot), & |
---|
2766 | torque_total(inot), pitch_add(inot), & |
---|
2767 | torque_gen_old(inot)*omega_gen(inot)*gen_eff, & |
---|
2768 | torque_total(inot)*omega_rot(inot)*air_dens, & |
---|
2769 | thrust_rotor(inot), & |
---|
2770 | wdir(inot)*180.0_wp/pi, & |
---|
2771 | (phi_yaw(inot))*180.0_wp/pi |
---|
2772 | ENDIF |
---|
2773 | ENDIF |
---|
2774 | |
---|
2775 | !-- Set open flag |
---|
2776 | openfile_turb_mod(400+inot)%opened = .TRUE. |
---|
2777 | ENDDO !-- end of loop over turbines |
---|
2778 | |
---|
2779 | |
---|
2780 | |
---|
2781 | ENDIF |
---|
2782 | |
---|
2783 | |
---|
2784 | CALL cpu_log( log_point_s(61), 'wtm_forces', 'stop' ) |
---|
2785 | |
---|
2786 | ! |
---|
2787 | !-- Formats |
---|
2788 | 105 FORMAT ('Turbine control data for turbine ',I2,1X,':'/ & |
---|
2789 | &'----------------------------------------'/ & |
---|
2790 | &' Time RSpeed GSpeed GenTorque AeroTorque ', & |
---|
2791 | 'Pitch Power(Gen) Power(Rot) RotThrust WDirection ', & |
---|
2792 | 'YawOrient') |
---|
2793 | |
---|
2794 | 106 FORMAT (F9.2,2X,F7.3,2X,F7.2,2X,F12.1,3X,F12.1,1X,F6.2,2X,F12.1,2X, & |
---|
2795 | F12.1,1X,F12.1,4X,F7.2,4X,F7.2) |
---|
2796 | |
---|
2797 | |
---|
2798 | |
---|
2799 | END SUBROUTINE wtm_forces |
---|
2800 | |
---|
2801 | |
---|
2802 | !------------------------------------------------------------------------------! |
---|
2803 | ! Description: |
---|
2804 | ! ------------ |
---|
2805 | !> Yaw controller for the wind turbine model |
---|
2806 | !------------------------------------------------------------------------------! |
---|
2807 | SUBROUTINE wtm_yawcontrol( inot ) |
---|
2808 | |
---|
2809 | USE kinds |
---|
2810 | |
---|
2811 | IMPLICIT NONE |
---|
2812 | |
---|
2813 | INTEGER(iwp) :: inot |
---|
2814 | INTEGER(iwp) :: i_wd_30 |
---|
2815 | REAL(wp) :: missal |
---|
2816 | |
---|
2817 | i_wd_30 = 0_iwp |
---|
2818 | |
---|
2819 | ! |
---|
2820 | !-- The yaw controller computes a 30s running mean of the wind direction. |
---|
2821 | !-- If the difference between turbine alignment and wind direction exceeds |
---|
2822 | !-- 5 degrees, the turbine is yawed. The mechanism stops as soon as the 2s-running |
---|
2823 | !-- mean of the missalignment is smaller than 0.5 degrees. |
---|
2824 | !-- Attention: If the timestep during the simulation changes significantly |
---|
2825 | !-- the lengths of the running means change and it does not correspond to |
---|
2826 | !-- 30s/2s anymore. |
---|
2827 | !-- ! Needs to be modified for these situations ! |
---|
2828 | !-- For wind from the east, the averaging of the wind direction could cause |
---|
2829 | !-- problems and the yaw controller is probably flawed. -> Routine for |
---|
2830 | !-- averaging needs to be improved! |
---|
2831 | ! |
---|
2832 | !-- Check if turbine is not yawing |
---|
2833 | IF ( .NOT. doyaw(inot) ) THEN |
---|
2834 | ! |
---|
2835 | !-- Write current wind direction into array |
---|
2836 | wd30_l = wd30(inot,:) |
---|
2837 | wd30_l = CSHIFT( wd30_l, SHIFT=-1 ) |
---|
2838 | wd30_l(1) = wdir(inot) |
---|
2839 | ! |
---|
2840 | !-- Check if array is full ( no more dummies ) |
---|
2841 | IF ( .NOT. ANY( wd30_l == 999.) ) THEN |
---|
2842 | |
---|
2843 | missal = SUM( wd30_l ) / SIZE( wd30_l ) - phi_yaw(inot) |
---|
2844 | ! |
---|
2845 | !-- Check if turbine is missaligned by more than max_miss |
---|
2846 | IF ( ABS( missal ) > max_miss ) THEN |
---|
2847 | ! |
---|
2848 | !-- Check in which direction to yaw |
---|
2849 | yawdir(inot) = SIGN( 1.0_wp, missal ) |
---|
2850 | ! |
---|
2851 | !-- Start yawing of turbine |
---|
2852 | phi_yaw(inot) = phi_yaw(inot) + yawdir(inot) * yaw_speed * dt_3d |
---|
2853 | doyaw(inot) = .TRUE. |
---|
2854 | wd30_l = 999. ! fill with dummies again |
---|
2855 | ENDIF |
---|
2856 | ENDIF |
---|
2857 | |
---|
2858 | wd30(inot,:) = wd30_l |
---|
2859 | |
---|
2860 | ! |
---|
2861 | !-- If turbine is already yawing: |
---|
2862 | !-- Initialize 2 s running mean and yaw until the missalignment is smaller |
---|
2863 | !-- than min_miss |
---|
2864 | |
---|
2865 | ELSE |
---|
2866 | ! |
---|
2867 | !-- Initialize 2 s running mean |
---|
2868 | wd2_l = wd2(inot,:) |
---|
2869 | wd2_l = CSHIFT( wd2_l, SHIFT = -1 ) |
---|
2870 | wd2_l(1) = wdir(inot) |
---|
2871 | ! |
---|
2872 | !-- Check if array is full ( no more dummies ) |
---|
2873 | IF ( .NOT. ANY( wd2_l == 999.0_wp ) ) THEN |
---|
2874 | ! |
---|
2875 | !-- Calculate missalignment of turbine |
---|
2876 | missal = SUM( wd2_l - phi_yaw(inot) ) / SIZE( wd2_l ) |
---|
2877 | ! |
---|
2878 | !-- Check if missalignment is still larger than 0.5 degree and if the |
---|
2879 | !-- yaw direction is still right |
---|
2880 | IF ( ( ABS( missal ) > min_miss ) .AND. & |
---|
2881 | ( yawdir(inot) == SIGN( 1.0_wp, missal ) ) ) THEN |
---|
2882 | ! |
---|
2883 | !-- Continue yawing |
---|
2884 | phi_yaw(inot) = phi_yaw(inot) + yawdir(inot) * yaw_speed * dt_3d |
---|
2885 | ELSE |
---|
2886 | ! |
---|
2887 | !-- Stop yawing |
---|
2888 | doyaw(inot) = .FALSE. |
---|
2889 | wd2_l = 999.0_wp ! fill with dummies again |
---|
2890 | ENDIF |
---|
2891 | ELSE |
---|
2892 | ! |
---|
2893 | !-- Continue yawing |
---|
2894 | phi_yaw(inot) = phi_yaw(inot) + yawdir(inot) * yaw_speed * dt_3d |
---|
2895 | ENDIF |
---|
2896 | |
---|
2897 | wd2(inot,:) = wd2_l |
---|
2898 | |
---|
2899 | ENDIF |
---|
2900 | |
---|
2901 | END SUBROUTINE wtm_yawcontrol |
---|
2902 | |
---|
2903 | |
---|
2904 | !------------------------------------------------------------------------------! |
---|
2905 | ! Description: |
---|
2906 | ! ------------ |
---|
2907 | !> Initialization of the speed control |
---|
2908 | !------------------------------------------------------------------------------! |
---|
2909 | SUBROUTINE wtm_init_speed_control |
---|
2910 | |
---|
2911 | |
---|
2912 | IMPLICIT NONE |
---|
2913 | |
---|
2914 | ! |
---|
2915 | !-- If speed control is set, remaining variables and control_parameters for |
---|
2916 | !-- the control algorithm are calculated |
---|
2917 | ! |
---|
2918 | !-- Calculate slope constant for region 15 |
---|
2919 | slope15 = ( slope2 * min_reg2 * min_reg2 ) / ( min_reg2 - min_reg15 ) |
---|
2920 | ! |
---|
2921 | !-- Calculate upper limit of slipage region |
---|
2922 | vs_sysp = rated_genspeed / 1.1_wp |
---|
2923 | ! |
---|
2924 | !-- Calculate slope of slipage region |
---|
2925 | slope25 = ( rated_power / rated_genspeed ) / & |
---|
2926 | ( rated_genspeed - vs_sysp ) |
---|
2927 | ! |
---|
2928 | !-- Calculate lower limit of slipage region |
---|
2929 | min_reg25 = ( slope25 - SQRT( slope25 * ( slope25 - 4.0_wp * & |
---|
2930 | slope2 * vs_sysp ) ) ) / & |
---|
2931 | ( 2.0_wp * slope2 ) |
---|
2932 | ! |
---|
2933 | !-- Frequency for the simple low pass filter |
---|
2934 | Fcorner = 0.25_wp |
---|
2935 | ! |
---|
2936 | !-- At the first timestep the torque is set to its maximum to prevent |
---|
2937 | !-- an overspeeding of the rotor |
---|
2938 | IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN |
---|
2939 | torque_gen_old(:) = max_torque_gen |
---|
2940 | ENDIF |
---|
2941 | |
---|
2942 | END SUBROUTINE wtm_init_speed_control |
---|
2943 | |
---|
2944 | |
---|
2945 | !------------------------------------------------------------------------------! |
---|
2946 | ! Description: |
---|
2947 | ! ------------ |
---|
2948 | !> Simple controller for the regulation of the rotor speed |
---|
2949 | !------------------------------------------------------------------------------! |
---|
2950 | SUBROUTINE wtm_speed_control( inot ) |
---|
2951 | |
---|
2952 | |
---|
2953 | IMPLICIT NONE |
---|
2954 | |
---|
2955 | INTEGER(iwp) :: inot |
---|
2956 | |
---|
2957 | |
---|
2958 | |
---|
2959 | ! |
---|
2960 | !-- The controller is based on the fortran script from Jonkman |
---|
2961 | !-- et al. 2009 "Definition of a 5 MW Reference Wind Turbine for |
---|
2962 | !-- offshore system developement" |
---|
2963 | |
---|
2964 | ! |
---|
2965 | !-- The generator speed is filtered by a low pass filter |
---|
2966 | !-- for the control of the generator torque |
---|
2967 | lp_coeff = EXP( -2.0_wp * 3.14_wp * dt_3d * Fcorner ) |
---|
2968 | omega_gen_f(inot) = ( 1.0_wp - lp_coeff ) * omega_gen(inot) + lp_coeff *& |
---|
2969 | omega_gen_f_old(inot) |
---|
2970 | |
---|
2971 | IF ( omega_gen_f(inot) <= min_reg15 ) THEN |
---|
2972 | ! |
---|
2973 | !-- Region 1: Generator torque is set to zero to accelerate the rotor: |
---|
2974 | torque_gen(inot) = 0 |
---|
2975 | |
---|
2976 | ELSEIF ( omega_gen_f(inot) <= min_reg2 ) THEN |
---|
2977 | ! |
---|
2978 | !-- Region 1.5: Generator torque is increasing linearly with rotor speed: |
---|
2979 | torque_gen(inot) = slope15 * ( omega_gen_f(inot) - min_reg15 ) |
---|
2980 | |
---|
2981 | ELSEIF ( omega_gen_f(inot) <= min_reg25 ) THEN |
---|
2982 | ! |
---|
2983 | !-- Region 2: Generator torque is increased by the square of the generator |
---|
2984 | !-- speed to keep the TSR optimal: |
---|
2985 | torque_gen(inot) = slope2 * omega_gen_f(inot) * omega_gen_f(inot) |
---|
2986 | |
---|
2987 | ELSEIF ( omega_gen_f(inot) < rated_genspeed ) THEN |
---|
2988 | ! |
---|
2989 | !-- Region 2.5: Slipage region between 2 and 3: |
---|
2990 | torque_gen(inot) = slope25 * ( omega_gen_f(inot) - vs_sysp ) |
---|
2991 | |
---|
2992 | ELSE |
---|
2993 | ! |
---|
2994 | !-- Region 3: Generator torque is antiproportional to the rotor speed to |
---|
2995 | !-- keep the power constant: |
---|
2996 | torque_gen(inot) = rated_power / omega_gen_f(inot) |
---|
2997 | |
---|
2998 | ENDIF |
---|
2999 | ! |
---|
3000 | !-- Calculate torque rate and confine with a max |
---|
3001 | trq_rate = ( torque_gen(inot) - torque_gen_old(inot) ) / dt_3d |
---|
3002 | trq_rate = MIN( MAX( trq_rate, -1.0_wp * max_trq_rate ), max_trq_rate ) |
---|
3003 | ! |
---|
3004 | !-- Calculate new gen torque and confine with max torque |
---|
3005 | torque_gen(inot) = torque_gen_old(inot) + trq_rate * dt_3d |
---|
3006 | torque_gen(inot) = MIN( torque_gen(inot), max_torque_gen ) |
---|
3007 | ! |
---|
3008 | !-- Overwrite values for next timestep |
---|
3009 | omega_rot_l(inot) = omega_gen(inot) / gear_ratio |
---|
3010 | |
---|
3011 | |
---|
3012 | END SUBROUTINE wtm_speed_control |
---|
3013 | |
---|
3014 | |
---|
3015 | !------------------------------------------------------------------------------! |
---|
3016 | ! Description: |
---|
3017 | ! ------------ |
---|
3018 | !> Application of the additional forces generated by the wind turbine on the |
---|
3019 | !> flow components (tendency terms) |
---|
3020 | !> Call for all grid points |
---|
3021 | !------------------------------------------------------------------------------! |
---|
3022 | SUBROUTINE wtm_actions( location ) |
---|
3023 | |
---|
3024 | |
---|
3025 | CHARACTER (LEN=*) :: location !< |
---|
3026 | |
---|
3027 | INTEGER(iwp) :: i !< running index |
---|
3028 | INTEGER(iwp) :: j !< running index |
---|
3029 | INTEGER(iwp) :: k !< running index |
---|
3030 | |
---|
3031 | |
---|
3032 | SELECT CASE ( location ) |
---|
3033 | |
---|
3034 | CASE ( 'before_timestep' ) |
---|
3035 | |
---|
3036 | CALL wtm_forces |
---|
3037 | |
---|
3038 | CASE ( 'u-tendency' ) |
---|
3039 | ! |
---|
3040 | !-- Apply the x-component of the force to the u-component of the flow: |
---|
3041 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
3042 | DO i = nxlg, nxrg |
---|
3043 | DO j = nysg, nyng |
---|
3044 | DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) |
---|
3045 | ! |
---|
3046 | !-- Calculate the thrust generated by the nacelle and the tower |
---|
3047 | tend_nac_x = 0.5_wp * nac_cd_surf(k,j,i) * & |
---|
3048 | SIGN( u(k,j,i)**2 , u(k,j,i) ) |
---|
3049 | tend_tow_x = 0.5_wp * tow_cd_surf(k,j,i) * & |
---|
3050 | SIGN( u(k,j,i)**2 , u(k,j,i) ) |
---|
3051 | |
---|
3052 | tend(k,j,i) = tend(k,j,i) + ( - rot_tend_x(k,j,i) & |
---|
3053 | - tend_nac_x - tend_tow_x ) & |
---|
3054 | * MERGE( 1.0_wp, 0.0_wp, & |
---|
3055 | BTEST( wall_flags_total_0(k,j,i), 1 ) ) |
---|
3056 | ENDDO |
---|
3057 | ENDDO |
---|
3058 | ENDDO |
---|
3059 | ENDIF |
---|
3060 | |
---|
3061 | CASE ( 'v-tendency' ) |
---|
3062 | ! |
---|
3063 | !-- Apply the y-component of the force to the v-component of the flow: |
---|
3064 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
3065 | DO i = nxlg, nxrg |
---|
3066 | DO j = nysg, nyng |
---|
3067 | DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) |
---|
3068 | tend_nac_y = 0.5_wp * nac_cd_surf(k,j,i) * & |
---|
3069 | SIGN( v(k,j,i)**2 , v(k,j,i) ) |
---|
3070 | tend_tow_y = 0.5_wp * tow_cd_surf(k,j,i) * & |
---|
3071 | SIGN( v(k,j,i)**2 , v(k,j,i) ) |
---|
3072 | tend(k,j,i) = tend(k,j,i) + ( - rot_tend_y(k,j,i) & |
---|
3073 | - tend_nac_y - tend_tow_y ) & |
---|
3074 | * MERGE( 1.0_wp, 0.0_wp, & |
---|
3075 | BTEST( wall_flags_total_0(k,j,i), 2 ) ) |
---|
3076 | ENDDO |
---|
3077 | ENDDO |
---|
3078 | ENDDO |
---|
3079 | ENDIF |
---|
3080 | |
---|
3081 | CASE ( 'w-tendency' ) |
---|
3082 | ! |
---|
3083 | !-- Apply the z-component of the force to the w-component of the flow: |
---|
3084 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
3085 | DO i = nxlg, nxrg |
---|
3086 | DO j = nysg, nyng |
---|
3087 | DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) |
---|
3088 | tend(k,j,i) = tend(k,j,i) - rot_tend_z(k,j,i) & |
---|
3089 | * MERGE( 1.0_wp, 0.0_wp, & |
---|
3090 | BTEST( wall_flags_total_0(k,j,i), 3 ) ) |
---|
3091 | ENDDO |
---|
3092 | ENDDO |
---|
3093 | ENDDO |
---|
3094 | ENDIF |
---|
3095 | |
---|
3096 | |
---|
3097 | CASE DEFAULT |
---|
3098 | CONTINUE |
---|
3099 | |
---|
3100 | END SELECT |
---|
3101 | |
---|
3102 | |
---|
3103 | END SUBROUTINE wtm_actions |
---|
3104 | |
---|
3105 | |
---|
3106 | !------------------------------------------------------------------------------! |
---|
3107 | ! Description: |
---|
3108 | ! ------------ |
---|
3109 | !> Application of the additional forces generated by the wind turbine on the |
---|
3110 | !> flow components (tendency terms) |
---|
3111 | !> Call for grid point i,j |
---|
3112 | !------------------------------------------------------------------------------! |
---|
3113 | SUBROUTINE wtm_actions_ij( i, j, location ) |
---|
3114 | |
---|
3115 | |
---|
3116 | CHARACTER (LEN=*) :: location !< |
---|
3117 | INTEGER(iwp) :: i !< running index |
---|
3118 | INTEGER(iwp) :: j !< running index |
---|
3119 | INTEGER(iwp) :: k !< running index |
---|
3120 | |
---|
3121 | SELECT CASE ( location ) |
---|
3122 | |
---|
3123 | CASE ( 'before_timestep' ) |
---|
3124 | |
---|
3125 | CALL wtm_forces |
---|
3126 | |
---|
3127 | CASE ( 'u-tendency' ) |
---|
3128 | ! |
---|
3129 | !-- Apply the x-component of the force to the u-component of the flow: |
---|
3130 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
3131 | DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) |
---|
3132 | ! |
---|
3133 | !-- Calculate the thrust generated by the nacelle and the tower |
---|
3134 | tend_nac_x = 0.5_wp * nac_cd_surf(k,j,i) * & |
---|
3135 | SIGN( u(k,j,i)**2 , u(k,j,i) ) |
---|
3136 | tend_tow_x = 0.5_wp * tow_cd_surf(k,j,i) * & |
---|
3137 | SIGN( u(k,j,i)**2 , u(k,j,i) ) |
---|
3138 | tend(k,j,i) = tend(k,j,i) + ( - rot_tend_x(k,j,i) & |
---|
3139 | - tend_nac_x - tend_tow_x ) & |
---|
3140 | * MERGE( 1.0_wp, 0.0_wp, & |
---|
3141 | BTEST( wall_flags_total_0(k,j,i), 1 ) ) |
---|
3142 | ENDDO |
---|
3143 | ENDIF |
---|
3144 | |
---|
3145 | CASE ( 'v-tendency' ) |
---|
3146 | ! |
---|
3147 | !-- Apply the y-component of the force to the v-component of the flow: |
---|
3148 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
3149 | DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) |
---|
3150 | tend_nac_y = 0.5_wp * nac_cd_surf(k,j,i) * & |
---|
3151 | SIGN( v(k,j,i)**2 , v(k,j,i) ) |
---|
3152 | tend_tow_y = 0.5_wp * tow_cd_surf(k,j,i) * & |
---|
3153 | SIGN( v(k,j,i)**2 , v(k,j,i) ) |
---|
3154 | tend(k,j,i) = tend(k,j,i) + ( - rot_tend_y(k,j,i) & |
---|
3155 | - tend_nac_y - tend_tow_y ) & |
---|
3156 | * MERGE( 1.0_wp, 0.0_wp, & |
---|
3157 | BTEST( wall_flags_total_0(k,j,i), 2 ) ) |
---|
3158 | ENDDO |
---|
3159 | ENDIF |
---|
3160 | |
---|
3161 | CASE ( 'w-tendency' ) |
---|
3162 | ! |
---|
3163 | !-- Apply the z-component of the force to the w-component of the flow: |
---|
3164 | IF ( time_since_reference_point >= time_turbine_on ) THEN |
---|
3165 | DO k = nzb+1, MAXVAL(k_hub) + MAXVAL(k_smear) |
---|
3166 | tend(k,j,i) = tend(k,j,i) - rot_tend_z(k,j,i) & |
---|
3167 | * MERGE( 1.0_wp, 0.0_wp, & |
---|
3168 | BTEST( wall_flags_total_0(k,j,i), 3 ) ) |
---|
3169 | ENDDO |
---|
3170 | ENDIF |
---|
3171 | |
---|
3172 | |
---|
3173 | CASE DEFAULT |
---|
3174 | CONTINUE |
---|
3175 | |
---|
3176 | END SELECT |
---|
3177 | |
---|
3178 | |
---|
3179 | END SUBROUTINE wtm_actions_ij |
---|
3180 | |
---|
3181 | |
---|
3182 | SUBROUTINE wtm_data_output |
---|
3183 | |
---|
3184 | |
---|
3185 | INTEGER(iwp) :: t_ind = 0 !< time index |
---|
3186 | |
---|
3187 | INTEGER(iwp) :: return_value !< returned status value of called function |
---|
3188 | |
---|
3189 | IF ( myid == 0 ) THEN |
---|
3190 | |
---|
3191 | ! |
---|
3192 | !-- At the first call of this routine write the spatial coordinates. |
---|
3193 | IF ( .NOT. initial_write_coordinates ) THEN |
---|
3194 | ALLOCATE ( output_values_1d_target(1:nturbines) ) |
---|
3195 | output_values_1d_target = rcx(1:nturbines) |
---|
3196 | output_values_1d_pointer => output_values_1d_target |
---|
3197 | return_value = dom_write_var( nc_filename, & |
---|
3198 | 'x', & |
---|
3199 | values_realwp_1d = output_values_1d_pointer, & |
---|
3200 | bounds_start = (/1/), & |
---|
3201 | bounds_end = (/nturbines/) ) |
---|
3202 | |
---|
3203 | output_values_1d_target = rcy(1:nturbines) |
---|
3204 | output_values_1d_pointer => output_values_1d_target |
---|
3205 | return_value = dom_write_var( nc_filename, & |
---|
3206 | 'y', & |
---|
3207 | values_realwp_1d = output_values_1d_pointer, & |
---|
3208 | bounds_start = (/1/), & |
---|
3209 | bounds_end = (/nturbines/) ) |
---|
3210 | |
---|
3211 | output_values_1d_target = rcz(1:nturbines) |
---|
3212 | output_values_1d_pointer => output_values_1d_target |
---|
3213 | return_value = dom_write_var( nc_filename, & |
---|
3214 | 'z', & |
---|
3215 | values_realwp_1d = output_values_1d_pointer, & |
---|
3216 | bounds_start = (/1/), & |
---|
3217 | bounds_end = (/nturbines/) ) |
---|
3218 | |
---|
3219 | initial_write_coordinates = .TRUE. |
---|
3220 | DEALLOCATE ( output_values_1d_target ) |
---|
3221 | ENDIF |
---|
3222 | |
---|
3223 | t_ind = t_ind + 1 |
---|
3224 | |
---|
3225 | ALLOCATE ( output_values_1d_target(1:nturbines) ) |
---|
3226 | output_values_1d_target = omega_rot(:) |
---|
3227 | output_values_1d_pointer => output_values_1d_target |
---|
3228 | |
---|
3229 | return_value = dom_write_var( nc_filename, & |
---|
3230 | 'rotor_speed', & |
---|
3231 | values_realwp_1d = output_values_1d_pointer, & |
---|
3232 | bounds_start = (/1, t_ind/), & |
---|
3233 | bounds_end = (/nturbines, t_ind /) ) |
---|
3234 | |
---|
3235 | output_values_1d_target = omega_gen(:) |
---|
3236 | output_values_1d_pointer => output_values_1d_target |
---|
3237 | return_value = dom_write_var( nc_filename, & |
---|
3238 | 'generator_speed', & |
---|
3239 | values_realwp_1d = output_values_1d_pointer, & |
---|
3240 | bounds_start = (/1, t_ind/), & |
---|
3241 | bounds_end = (/nturbines, t_ind /) ) |
---|
3242 | |
---|
3243 | output_values_1d_target = torque_gen_old(:) |
---|
3244 | output_values_1d_pointer => output_values_1d_target |
---|
3245 | |
---|
3246 | return_value = dom_write_var( nc_filename, & |
---|
3247 | 'generator_torque', & |
---|
3248 | values_realwp_1d = output_values_1d_pointer, & |
---|
3249 | bounds_start = (/1, t_ind/), & |
---|
3250 | bounds_end = (/nturbines, t_ind /) ) |
---|
3251 | |
---|
3252 | output_values_1d_target = torque_total(:) |
---|
3253 | output_values_1d_pointer => output_values_1d_target |
---|
3254 | |
---|
3255 | return_value = dom_write_var( nc_filename, & |
---|
3256 | 'rotor_torque', & |
---|
3257 | values_realwp_1d = output_values_1d_pointer, & |
---|
3258 | bounds_start = (/1, t_ind/), & |
---|
3259 | bounds_end = (/nturbines, t_ind /) ) |
---|
3260 | |
---|
3261 | output_values_1d_target = pitch_add(:) |
---|
3262 | output_values_1d_pointer => output_values_1d_target |
---|
3263 | |
---|
3264 | return_value = dom_write_var( nc_filename, & |
---|
3265 | 'pitch_angle', & |
---|
3266 | values_realwp_1d = output_values_1d_pointer, & |
---|
3267 | bounds_start = (/1, t_ind/), & |
---|
3268 | bounds_end = (/nturbines, t_ind /) ) |
---|
3269 | |
---|
3270 | output_values_1d_target = torque_gen_old(:)*omega_gen(:)*gen_eff |
---|
3271 | output_values_1d_pointer => output_values_1d_target |
---|
3272 | |
---|
3273 | return_value = dom_write_var( nc_filename, & |
---|
3274 | 'generator_power', & |
---|
3275 | values_realwp_1d = output_values_1d_pointer, & |
---|
3276 | bounds_start = (/1, t_ind/), & |
---|
3277 | bounds_end = (/nturbines, t_ind /) ) |
---|
3278 | |
---|
3279 | DO inot = 1, nturbines |
---|
3280 | output_values_1d_target(inot) = torque_total(inot)*omega_rot(inot)*air_dens |
---|
3281 | ENDDO |
---|
3282 | output_values_1d_pointer => output_values_1d_target |
---|
3283 | |
---|
3284 | return_value = dom_write_var( nc_filename, & |
---|
3285 | 'rotor_power', & |
---|
3286 | values_realwp_1d = output_values_1d_pointer, & |
---|
3287 | bounds_start = (/1, t_ind/), & |
---|
3288 | bounds_end = (/nturbines, t_ind /) ) |
---|
3289 | |
---|
3290 | output_values_1d_target = thrust_rotor(:) |
---|
3291 | output_values_1d_pointer => output_values_1d_target |
---|
3292 | |
---|
3293 | return_value = dom_write_var( nc_filename, & |
---|
3294 | 'rotor_thrust', & |
---|
3295 | values_realwp_1d = output_values_1d_pointer, & |
---|
3296 | bounds_start = (/1, t_ind/), & |
---|
3297 | bounds_end = (/nturbines, t_ind /) ) |
---|
3298 | |
---|
3299 | output_values_1d_target = wdir(:)*180.0_wp/pi |
---|
3300 | output_values_1d_pointer => output_values_1d_target |
---|
3301 | |
---|
3302 | return_value = dom_write_var( nc_filename, & |
---|
3303 | 'wind_direction', & |
---|
3304 | values_realwp_1d = output_values_1d_pointer, & |
---|
3305 | bounds_start = (/1, t_ind/), & |
---|
3306 | bounds_end = (/nturbines, t_ind /) ) |
---|
3307 | |
---|
3308 | output_values_1d_target = (phi_yaw(:))*180.0_wp/pi |
---|
3309 | output_values_1d_pointer => output_values_1d_target |
---|
3310 | |
---|
3311 | return_value = dom_write_var( nc_filename, & |
---|
3312 | 'yaw_angle', & |
---|
3313 | values_realwp_1d = output_values_1d_pointer, & |
---|
3314 | bounds_start = (/1, t_ind/), & |
---|
3315 | bounds_end = (/nturbines, t_ind /) ) |
---|
3316 | |
---|
3317 | output_values_0d_target = time_since_reference_point |
---|
3318 | output_values_0d_pointer => output_values_0d_target |
---|
3319 | |
---|
3320 | return_value = dom_write_var( nc_filename, & |
---|
3321 | 'time', & |
---|
3322 | values_realwp_0d = output_values_0d_pointer, & |
---|
3323 | bounds_start = (/t_ind/), & |
---|
3324 | bounds_end = (/t_ind/) ) |
---|
3325 | |
---|
3326 | DEALLOCATE ( output_values_1d_target ) |
---|
3327 | |
---|
3328 | ENDIF |
---|
3329 | |
---|
3330 | END SUBROUTINE wtm_data_output |
---|
3331 | |
---|
3332 | END MODULE wind_turbine_model_mod |
---|