Home

Context Navigation

source: palm/trunk/SOURCE/urban_surface_mod.f90 @ 2034

Last change on this file since 2034 was 2032, checked in by knoop, 8 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 207.0 KB

Line
1	!> @file urban_surface_mod.f90
2	!--------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 2015-2016 Czech Technical University in Prague
18	! Copyright 1997-2016 Leibniz Universitaet Hannover
19	!--------------------------------------------------------------------------------!
20	!
21	! Current revisions:
22	! ------------------
23	!
24	!
25	! Former revisions:
26	! -----------------
27	! $Id: urban_surface_mod.f90 2032 2016-10-21 15:13:51Z gronemeier $
28	!
29	! 2031 2016-10-21 15:11:58Z knoop
30	! renamed variable rho to rho_ocean
31	!
32	! 2024 2016-10-12 16:42:37Z kanani
33	! Bugfixes in deallocation of array plantt and reading of csf/csfsurf,
34	! optimization of MPI-RMA operations,
35	! declaration of pcbl as integer,
36	! renamed usm_radnet -> usm_rad_net, usm_canopy_khf -> usm_canopy_hr,
37	! splitted arrays svf -> svf & csf, svfsurf -> svfsurf & csfsurf,
38	! use of new control parameter varnamelength,
39	! added output variables usm_rad_ressw, usm_rad_reslw,
40	! minor formatting changes,
41	! minor optimizations.
42	!
43	! 2011 2016-09-19 17:29:57Z kanani
44	! Major reformatting according to PALM coding standard (comments, blanks,
45	! alphabetical ordering, etc.),
46	! removed debug_prints,
47	! removed auxiliary SUBROUTINE get_usm_info, instead, USM flag urban_surface is
48	! defined in MODULE control_parameters (modules.f90) to avoid circular
49	! dependencies,
50	! renamed canopy_heat_flux to pc_heating_rate, as meaning of quantity changed.
51	!
52	! 2007 2016-08-24 15:47:17Z kanani
53	! Initial revision
54	!
55	!
56	! Description:
57	! ------------
58	! 2016/6/9 - Initial version of the USM (Urban Surface Model)
59	! authors: Jaroslav Resler, Pavel Krc
60	! (Czech Technical University in Prague and Institute of
61	! Computer Science of the Czech Academy of Sciences, Prague)
62	! with contributions: Michal Belda, Nina Benesova, Ondrej Vlcek
63	! partly inspired by PALM LSM (B. Maronga)
64	! parameterizations of Ra checked with TUF3D (E. S. Krayenhoff)
65	!> Module for Urban Surface Model (USM)
66	!> The module includes:
67	!> 1. radiation model with direct/diffuse radiation, shading, reflections
68	!> and integration with plant canopy
69	!> 2. wall and wall surface model
70	!> 3. surface layer energy balance
71	!> 4. anthropogenic heat (only from transportation so far)
72	!> 5. necessary auxiliary subroutines (reading inputs, writing outputs,
73	!> restart simulations, ...)
74	!> It also make use of standard radiation and integrates it into
75	!> urban surface model.
76	!>
77	!> Further work:
78	!> -------------
79	!> 1. Reduce number of shape view factors by merging factors for distant surfaces
80	!> under shallow angles. Idea: Iteratively select the smallest shape view
81	!> factor by value (among all sources and targets) which has a similarly
82	!> oriented source neighbor (or near enough) SVF and merge them by adding
83	!> value of the smaller SVF to the larger one and deleting the smaller one.
84	!> This will allow for better scaling at higher resolutions.
85	!>
86	!> 2. Remove global arrays surfouts, surfoutl and only keep track of radiosity
87	!> from surfaces that are visible from local surfaces (i.e. there is a SVF
88	!> where target is local). To do that, radiosity will be exchanged after each
89	!> reflection step using MPI_Alltoall instead of current MPI_Allgather.
90	!>
91	!> @todo Check optimizations for RMA operations
92	!> @todo Alternatives for MPI_WIN_ALLOCATE? (causes problems with openmpi)
93	!> @todo Check for load imbalances in CPU measures, e.g. for exchange_horiz_prog
94	!> factor 3 between min and max time
95	!------------------------------------------------------------------------------!
96	MODULE urban_surface_mod
97
98	USE arrays_3d, &
99	ONLY: zu, pt, pt_1, pt_2, p, ol, shf, ts, us, u, v, w, hyp, tend
100
101	USE cloud_parameters, &
102	ONLY: cp, r_d
103
104	USE constants, &
105	ONLY: pi
106
107	USE control_parameters, &
108	ONLY: dz, topography, dt_3d, intermediate_timestep_count, &
109	initializing_actions, intermediate_timestep_count_max, &
110	simulated_time, end_time, timestep_scheme, tsc, &
111	coupling_char, io_blocks, io_group, message_string, &
112	time_since_reference_point, surface_pressure, &
113	g, pt_surface, large_scale_forcing, lsf_surf, &
114	time_do3d, dt_do3d, average_count_3d, varnamelength, &
115	urban_surface
116
117	USE cpulog, &
118	ONLY: cpu_log, log_point, log_point_s
119
120	USE grid_variables, &
121	ONLY: dx, dy, ddx, ddy, ddx2, ddy2
122
123	USE indices, &
124	ONLY: nx, ny, nnx, nny, nnz, nxl, nxlg, nxr, nxrg, nyn, nyng, nys, &
125	nysg, nzb_s_inner, nzb_s_outer, nzb, nzt, nbgp
126
127	USE, INTRINSIC :: iso_c_binding
128
129	USE kinds
130
131	USE pegrid
132
133	USE plant_canopy_model_mod, &
134	ONLY: plant_canopy, pch_index, &
135	pc_heating_rate, lad_s
136
137	USE radiation_model_mod, &
138	ONLY: radiation, calc_zenith, zenith, day_init, time_utc_init, &
139	rad_net, rad_sw_in, rad_lw_in, rad_sw_out, rad_lw_out, &
140	sigma_sb, sun_direction, sun_dir_lat, sun_dir_lon, &
141	force_radiation_call
142
143	USE statistics, &
144	ONLY: hom, statistic_regions
145
146
147
148	IMPLICIT NONE
149
150	!-- configuration parameters (they can be setup in PALM config)
151	LOGICAL :: split_diffusion_radiation = .TRUE. !< split direct and diffusion dw radiation
152	!< (.F. in case the radiation model already does it)
153	LOGICAL :: usm_energy_balance_land = .TRUE. !< flag parameter indicating wheather the energy balance is calculated for land and roofs
154	LOGICAL :: usm_energy_balance_wall = .TRUE. !< flag parameter indicating wheather the energy balance is calculated for land and roofs
155	LOGICAL :: usm_material_model = .TRUE. !< flag parameter indicating wheather the model of heat in materials is used
156	LOGICAL :: usm_anthropogenic_heat = .FALSE. !< flag parameter indicating wheather the anthropogenic heat sources (e.g.transportation) are used
157	LOGICAL :: force_radiation_call_l = .FALSE. !< flag parameter for unscheduled radiation model calls
158	LOGICAL :: mrt_factors = .FALSE. !< whether to generate MRT factor files during init
159	LOGICAL :: write_svf_on_init = .FALSE.
160	LOGICAL :: read_svf_on_init = .FALSE.
161	LOGICAL :: usm_lad_rma = .TRUE. !< use MPI RMA to access LAD for raytracing (instead of global array)
162
163	INTEGER(iwp) :: nrefsteps = 0 !< number of reflection steps to perform
164
165	INTEGER(iwp) :: land_category = 2 !< default category for land surface
166	INTEGER(iwp) :: wall_category = 2 !< default category for wall surface over pedestrian zone
167	INTEGER(iwp) :: pedestrant_category = 2 !< default category for wall surface in pedestrian zone
168	INTEGER(iwp) :: roof_category = 2 !< default category for root surface
169	REAL(wp) :: roof_height_limit = 4._wp !< height for distinguish between land surfaces and roofs
170
171	REAL(wp), PARAMETER :: ext_coef = 0.6_wp !< extinction coefficient (a.k.a. alpha)
172	REAL(wp) :: ra_horiz_coef = 5.0_wp !< mysterious coefficient for correction of overestimation
173	!< of r_a for horizontal surfaces -> TODO
174
175	!-- parameters of urban surface model
176	INTEGER(iwp), PARAMETER :: usm_version_len = 10 !< length of identification string of usm version
177	CHARACTER(usm_version_len), PARAMETER :: usm_version = 'USM v. 1.0' !< identification of version of binary svf and restart files
178	INTEGER(iwp), PARAMETER :: svf_code_len = 15 !< length of code for verification of the end of svf file
179	CHARACTER(svf_code_len), PARAMETER :: svf_code = '* end svf *' !< code for verification of the end of svf file
180	INTEGER(iwp) :: nzu !< number of layers of urban surface (will be calculated)
181	INTEGER(iwp) :: nzub,nzut !< bottom and top layer of urban surface (will be calculated)
182	INTEGER(iwp), PARAMETER :: nzut_free = 3 !< number of free layers in urban surface layer above top of buildings
183	INTEGER(iwp), PARAMETER :: ndsvf = 2 !< number of dimensions of real values in SVF
184	INTEGER(iwp), PARAMETER :: idsvf = 2 !< number of dimensions of integer values in SVF
185	INTEGER(iwp), PARAMETER :: ndcsf = 2 !< number of dimensions of real values in CSF
186	INTEGER(iwp), PARAMETER :: idcsf = 2 !< number of dimensions of integer values in CSF
187	INTEGER(iwp), PARAMETER :: kdcsf = 4 !< number of dimensions of integer values in CSF calculation array
188	INTEGER(iwp), PARAMETER :: id = 1 !< position of d-index in surfl and surf
189	INTEGER(iwp), PARAMETER :: iz = 2 !< position of k-index in surfl and surf
190	INTEGER(iwp), PARAMETER :: iy = 3 !< position of j-index in surfl and surf
191	INTEGER(iwp), PARAMETER :: ix = 4 !< position of i-index in surfl and surf
192	INTEGER(iwp), PARAMETER :: iroof = 0 !< 0 - index of ground or roof
193	INTEGER(iwp), PARAMETER :: isouth = 1 !< 1 - index of south facing wall
194	INTEGER(iwp), PARAMETER :: inorth = 2 !< 2 - index of north facing wall
195	INTEGER(iwp), PARAMETER :: iwest = 3 !< 3 - index of west facing wall
196	INTEGER(iwp), PARAMETER :: ieast = 4 !< 4 - index of east facing wall
197	INTEGER(iwp), PARAMETER :: isky = 5 !< 5 - index of top border of the urban surface layer ("urban sky")
198	INTEGER(iwp), PARAMETER :: inorthb = 6 !< 6 - index of free north border of the domain (south facing)
199	INTEGER(iwp), PARAMETER :: isouthb = 7 !< 7 - index of north south border of the domain (north facing)
200	INTEGER(iwp), PARAMETER :: ieastb = 8 !< 8 - index of east border of the domain (west facing)
201	INTEGER(iwp), PARAMETER :: iwestb = 9 !< 9 - index of wast border of the domain (east facing)
202	INTEGER(iwp), DIMENSION(0:9), PARAMETER :: idir = (/0,0,0,-1,1,0,0,0,-1,1/) !< surface normal direction x indices
203	INTEGER(iwp), DIMENSION(0:9), PARAMETER :: jdir = (/0,-1,1,0,0,0,-1,1,0,0/) !< surface normal direction y indices
204	INTEGER(iwp), DIMENSION(0:9), PARAMETER :: kdir = (/1,0,0,0,0,-1,0,0,0,0/) !< surface normal direction z indices
205	REAL(wp), DIMENSION(1:4) :: ddxy2 !< 1/dx^2 or 1/dy^2 (in surface normal direction)
206	INTEGER(iwp), DIMENSION(1:4,6:9) :: ijdb !< start and end of the local domain border coordinates (set in code)
207	LOGICAL, DIMENSION(6:9) :: isborder !< is PE on the border of the domain in four corresponding directions
208	!< parameter but set in the code
209
210	!-- indices and sizes of urban surface model
211	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: surfl !< coordinates of i-th local surface in local grid - surfl[:,k] = [d, z, y, x]
212	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: surf !< coordinates of i-th surface in grid - surf[:,k] = [d, z, y, x]
213	INTEGER(iwp) :: nsurfl !< number of all surfaces in local processor
214	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nsurfs !< array of number of all surfaces in individual processors
215	INTEGER(iwp) :: startsky !< start index of block of sky
216	INTEGER(iwp) :: endsky !< end index of block of sky
217	INTEGER(iwp) :: nskys !< number of sky surfaces in local processor
218	INTEGER(iwp) :: startland !< start index of block of land and roof surfaces
219	INTEGER(iwp) :: endland !< end index of block of land and roof surfaces
220	INTEGER(iwp) :: nlands !< number of land and roof surfaces in local processor
221	INTEGER(iwp) :: startwall !< start index of block of wall surfaces
222	INTEGER(iwp) :: endwall !< end index of block of wall surfaces
223	INTEGER(iwp) :: nwalls !< number of wall surfaces in local processor
224	INTEGER(iwp) :: startenergy !< start index of block of real surfaces (land, walls and roofs)
225	INTEGER(iwp) :: endenergy !< end index of block of real surfaces (land, walls and roofs)
226	INTEGER(iwp) :: nenergy !< number of real surfaces in local processor
227	INTEGER(iwp) :: nsurf !< global number of surfaces in index array of surfaces (nsurf = Î£proc nsurfs)
228	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: surfstart !< starts of blocks of surfaces for individual processors in array surf
229	!< respective block for particular processor is surfstart[iproc]+1 : surfstart[iproc+1]
230	INTEGER(iwp) :: nsvfl !< number of svf for local processor
231	INTEGER(iwp) :: ncsfl !< no. of csf in local processor
232	!< needed only during calc_svf but must be here because it is
233	!< shared between subroutines usm_calc_svf and usm_raytrace
234
235	!-- type for calculation of svf
236	TYPE t_svf
237	INTEGER(iwp) :: isurflt !<
238	INTEGER(iwp) :: isurfs !<
239	REAL(wp) :: rsvf !<
240	REAL(wp) :: rtransp !<
241	END TYPE
242
243	!-- type for calculation of csf
244	TYPE t_csf
245	INTEGER(iwp) :: ip !<
246	INTEGER(iwp) :: itx !<
247	INTEGER(iwp) :: ity !<
248	INTEGER(iwp) :: itz !<
249	INTEGER(iwp) :: isurfs !<
250	REAL(wp) :: rsvf !<
251	REAL(wp) :: rtransp !<
252	END TYPE
253
254	!-- arrays for calculation of svf and csf
255	TYPE(t_svf), DIMENSION(:), POINTER :: asvf !< pointer to growing svc array
256	TYPE(t_csf), DIMENSION(:), POINTER :: acsf !< pointer to growing csf array
257	TYPE(t_svf), DIMENSION(:), ALLOCATABLE, TARGET :: asvf1, asvf2 !< realizations of svf array
258	TYPE(t_csf), DIMENSION(:), ALLOCATABLE, TARGET :: acsf1, acsf2 !< realizations of csf array
259	INTEGER(iwp) :: nsvfla !< dimmension of array allocated for storage of svf in local processor
260	INTEGER(iwp) :: ncsfla !< dimmension of array allocated for storage of csf in local processor
261	INTEGER(iwp) :: msvf, mcsf !< mod for swapping the growing array
262	INTEGER(iwp), PARAMETER :: gasize = 10000 !< initial size of growing arrays
263	!-- temporary arrays for calculation of csf in raytracing
264	INTEGER(iwp) :: maxboxesg !< max number of boxes ray can cross in the domain
265	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: boxes !< coordinates of gridboxes being crossed by ray
266	REAL(wp), DIMENSION(:), ALLOCATABLE :: crlens !< array of crossing lengths of ray for particular grid boxes
267	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: lad_ip !< array of numbers of process where lad is stored
268	INTEGER(kind=MPI_ADDRESS_KIND), &
269	DIMENSION(:), ALLOCATABLE :: lad_disp !< array of displaycements of lad in local array of proc lad_ip
270	REAL(wp), DIMENSION(:), ALLOCATABLE :: lad_s_ray !< array of received lad_s for appropriate gridboxes crossed by ray
271
272	!-- arrays storing the values of USM
273	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: svfsurf !< svfsurf[:,isvf] = index of source and target surface for svf[isvf]
274	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: svf !< array of shape view factors+direct irradiation factors for local surfaces
275	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfins !< array of sw radiation falling to local surface after i-th reflection
276	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinl !< array of lw radiation for local surface after i-th reflection
277
278	!< Inward radiation is also valid for virtual surfaces (radiation leaving domain)
279	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinsw !< array of sw radiation falling to local surface including radiation from reflections
280	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinlw !< array of lw radiation falling to local surface including radiation from reflections
281	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinswdir !< array of direct sw radiation falling to local surface
282	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinswdif !< array of diffuse sw radiation from sky and model boundary falling to local surface
283	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinlwdif !< array of diffuse lw radiation from sky and model boundary falling to local surface
284
285	!< Outward radiation is only valid for nonvirtual surfaces
286	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutsl !< array of reflected sw radiation for local surface in i-th reflection
287	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutll !< array of reflected + emitted lw radiation for local surface in i-th reflection
288	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfouts !< array of reflected sw radiation for all surfaces in i-th reflection
289	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutl !< array of reflected + emitted lw radiation for all surfaces in i-th reflection
290	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutsw !< array of total sw radiation outgoing from nonvirtual surfaces surfaces after all reflection
291	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutlw !< array of total lw radiation outgoing from nonvirtual surfaces surfaces after all reflection
292	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfhf !< array of total radiation flux incoming to minus outgoing from local surface
293	REAL(wp), DIMENSION(:), ALLOCATABLE :: rad_net_l !< local copy of rad_net (net radiation at surface)
294
295	!-- arrays for time averages
296	REAL(wp), DIMENSION(:), ALLOCATABLE :: rad_net_av !< average of rad_net_l
297	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinsw_av !< average of sw radiation falling to local surface including radiation from reflections
298	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinlw_av !< average of lw radiation falling to local surface including radiation from reflections
299	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinswdir_av !< average of direct sw radiation falling to local surface
300	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinswdif_av !< average of diffuse sw radiation from sky and model boundary falling to local surface
301	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinlwdif_av !< average of diffuse lw radiation from sky and model boundary falling to local surface
302	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinswref_av !< average of sw radiation falling to surface from reflections
303	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinlwref_av !< average of lw radiation falling to surface from reflections
304	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutsw_av !< average of total sw radiation outgoing from nonvirtual surfaces surfaces after all reflection
305	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfoutlw_av !< average of total lw radiation outgoing from nonvirtual surfaces surfaces after all reflection
306	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfins_av !< average of array of residua of sw radiation absorbed in surface after last reflection
307	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfinl_av !< average of array of residua of lw radiation absorbed in surface after last reflection
308	REAL(wp), DIMENSION(:), ALLOCATABLE :: surfhf_av !< average of total radiation flux incoming to minus outgoing from local surface
309
310	!-- block variables needed for calculation of the plant canopy model inside the urban surface model
311	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: csfsurf !< csfsurf[:,icsf] = index of target surface and csf grid index for csf[icsf]
312	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: csf !< array of plant canopy sink fators + direct irradiation factors (transparency)
313	!< for local surfaces
314	INTEGER(wp), DIMENSION(:,:), ALLOCATABLE :: pcbl !< k,j,i coordinates of l-th local plant canopy box pcbl[:,l] = [k, j, i]
315	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: gridpcbl !< index of local pcb[k,j,i]
316	REAL(wp), DIMENSION(:), ALLOCATABLE :: pcbinsw !< array of absorbed sw radiation for local plant canopy box
317	REAL(wp), DIMENSION(:), ALLOCATABLE :: pcbinlw !< array of absorbed lw radiation for local plant canopy box
318	INTEGER(iwp) :: npcbl !< number of the plant canopy gridboxes in local processor
319	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: pch !< heights of the plant canopy
320	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: pct !< top layer of the plant canopy
321	REAL(wp), DIMENSION(:,:,:), POINTER :: usm_lad !< subset of lad_s within urban surface, transformed to plain Z coordinate
322	REAL(wp), DIMENSION(:), POINTER :: usm_lad_g !< usm_lad globalized (used to avoid MPI RMA calls in raytracing)
323	REAL(wp) :: prototype_lad !< prototype leaf area density for computing effective optical depth
324	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nzterr, plantt !< temporary global arrays for raytracing
325
326	!-- radiation related arrays (it should be better in interface of radiation module of PALM
327	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rad_sw_in_dir !< direct sw radiation
328	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rad_sw_in_diff !< diffusion sw radiation
329	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rad_lw_in_diff !< diffusion lw radiation
330
331	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
332	!-- anthropogenic heat sources
333	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
334	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: aheat !< daily average of anthropogenic heat (W/m2)
335	REAL(wp), DIMENSION(:), ALLOCATABLE :: aheatprof !< diurnal profile of anthropogenic heat
336
337	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
338	!-- wall surface model
339	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
340	!-- wall surface model constants
341	INTEGER(iwp), PARAMETER :: nzb_wall = 0 !< inner side of the wall model (to be switched)
342	INTEGER(iwp), PARAMETER :: nzt_wall = 3 !< outer side of the wall model (to be switched)
343	INTEGER(iwp), PARAMETER :: nzw = 4 !< number of wall layers (fixed for now)
344
345	REAL(wp), DIMENSION(nzb_wall:nzt_wall) :: zwn_default = (/0.0242_wp, 0.0969_wp, 0.346_wp, 1.0_wp /)
346	!< normalized soil, wall and roof layer depths (m/m)
347
348	REAL(wp) :: wall_inner_temperature = 296.0_wp !< temperature of the inner wall surface (~23 degrees C) (K)
349	REAL(wp) :: roof_inner_temperature = 296.0_wp !< temperature of the inner roof surface (~23 degrees C) (K)
350	REAL(wp) :: soil_inner_temperature = 283.0_wp !< temperature of the deep soil (~10 degrees C) (K)
351
352	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
353	!-- surface and material model variables for walls, ground, roofs
354	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
355	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: surface_types !< array of types of wall parameters
356	REAL(wp), DIMENSION(:), ALLOCATABLE :: zwn !< normalized wall layer depths (m)
357	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ddz_wall !< 1/dz_wall
358	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: ddz_wall_stag !< 1/dz_wall_stag
359	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: dz_wall !< wall grid spacing (center-center)
360	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: dz_wall_stag !< wall grid spacing (edge-edge)
361	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: zw !< wall layer depths (m)
362
363	#if defined( __nopointer )
364	REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: t_surf !< wall surface temperature (K)
365	REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: t_surf_p !< progn. wall surface temperature (K)
366	#else
367	REAL(wp), DIMENSION(:), POINTER :: t_surf
368	REAL(wp), DIMENSION(:), POINTER :: t_surf_p
369
370	REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: t_surf_1
371	REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: t_surf_2
372	#endif
373	REAL(wp), DIMENSION(:), ALLOCATABLE, TARGET :: t_surf_av !< average of wall surface temperature (K)
374
375	!-- Temporal tendencies for time stepping
376	REAL(wp), DIMENSION(:), ALLOCATABLE :: tt_surface_m !< surface temperature tendency (K)
377
378	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
379	!-- Energy balance variables
380	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
381	!-- parameters of the land, roof and wall surfaces
382	LOGICAL, DIMENSION(:), ALLOCATABLE :: isroof_surf !< is the surface the part of a roof
383	REAL(wp), DIMENSION(:), ALLOCATABLE :: albedo_surf !< albedo of the surface
384	!-- parameters of the wall surfaces
385	REAL(wp), DIMENSION(:), ALLOCATABLE :: c_surface !< heat capacity of the wall surface skin ( J mâ2 Kâ1 )
386	REAL(wp), DIMENSION(:), ALLOCATABLE :: emiss_surf !< emissivity of the wall surface
387	REAL(wp), DIMENSION(:), ALLOCATABLE :: lambda_surf !< heat conductivity Î»S between air and surface ( W mâ2 Kâ1 )
388
389	!-- parameters of the walls material
390	REAL(wp), DIMENSION(:), ALLOCATABLE :: thickness_wall !< thickness of the wall, roof and soil layers
391	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rho_c_wall !< volumetric heat capacity of the material ( J m-3 K-1 ) (= 2.19E6)
392	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: lambda_h !< heat conductivity Î»T of the material ( W m-1 K-1 )
393	REAL(wp), DIMENSION(:), ALLOCATABLE :: roughness_wall !< roughness relative to concrete
394
395	!-- output wall heat flux arrays
396	REAL(wp), DIMENSION(:), ALLOCATABLE :: wshf !< kinematic wall heat flux of sensible heat (needed for diffusion_s!<)
397	REAL(wp), DIMENSION(:), ALLOCATABLE :: wshf_eb !< wall heat flux of sensible heat in wall normal direction
398	REAL(wp), DIMENSION(:), ALLOCATABLE :: wshf_eb_av !< average of wshf_eb
399	REAL(wp), DIMENSION(:), ALLOCATABLE :: wghf_eb !< wall ground heat flux
400	REAL(wp), DIMENSION(:), ALLOCATABLE :: wghf_eb_av !< average of wghf_eb
401
402	#if defined( __nopointer )
403	REAL(wp), DIMENSION(:,:), ALLOCATABLE, TARGET :: t_wall !< Wall temperature (K)
404	REAL(wp), DIMENSION(:,:), ALLOCATABLE, TARGET :: t_wall_av !< Average of t_wall
405	REAL(wp), DIMENSION(:,:), ALLOCATABLE, TARGET :: t_wall_p !< Prog. wall temperature (K)
406	#else
407	REAL(wp), DIMENSION(:,:), POINTER :: t_wall, t_wall_p
408	REAL(wp), DIMENSION(:,:), ALLOCATABLE, TARGET :: t_wall_av, t_wall_1, t_wall_2
409	#endif
410
411	!-- Wall temporal tendencies for time stepping
412	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: tt_wall_m !< t_wall prognostic array
413
414	!-- Surface and material parameters classes (surface_type)
415	!-- albedo, emissivity, lambda_surf, roughness, thickness, volumetric heat capacity, thermal conductivity
416	INTEGER(iwp) :: n_surface_types !< number of the wall type categories
417	INTEGER(iwp), PARAMETER :: n_surface_params = 8 !< number of parameters for each type of the wall
418	INTEGER(iwp), PARAMETER :: ialbedo = 1 !< albedo of the surface
419	INTEGER(iwp), PARAMETER :: iemiss = 2 !< emissivity of the surface
420	INTEGER(iwp), PARAMETER :: ilambdas = 3 !< heat conductivity Î»S between air and surface ( W mâ2 Kâ1 )
421	INTEGER(iwp), PARAMETER :: irough = 4 !< roughness relative to concrete
422	INTEGER(iwp), PARAMETER :: icsurf = 5 !< Surface skin layer heat capacity (J mâ2 Kâ1 )
423	INTEGER(iwp), PARAMETER :: ithick = 6 !< thickness of the surface (wall, roof, land) ( m )
424	INTEGER(iwp), PARAMETER :: irhoC = 7 !< volumetric heat capacity rho_ocean*C of the material ( J mâ3 Kâ1 )
425	INTEGER(iwp), PARAMETER :: ilambdah = 8 !< thermal conductivity Î»H of the wall (W mâ1 Kâ1 )
426	CHARACTER(12), DIMENSION(:), ALLOCATABLE :: surface_type_names !< names of wall types (used only for reports)
427	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: surface_type_codes !< codes of wall types
428	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: surface_params !< parameters of wall types
429
430	CHARACTER(len=*), PARAMETER :: svf_file_name='usm_svf'
431
432	!-- interfaces of subroutines accessed from outside of this module
433	INTERFACE usm_check_data_output
434	MODULE PROCEDURE usm_check_data_output
435	END INTERFACE usm_check_data_output
436
437	INTERFACE usm_check_parameters
438	MODULE PROCEDURE usm_check_parameters
439	END INTERFACE usm_check_parameters
440
441	INTERFACE usm_data_output_3d
442	MODULE PROCEDURE usm_data_output_3d
443	END INTERFACE usm_data_output_3d
444
445	INTERFACE usm_define_netcdf_grid
446	MODULE PROCEDURE usm_define_netcdf_grid
447	END INTERFACE usm_define_netcdf_grid
448
449	INTERFACE usm_init_urban_surface
450	MODULE PROCEDURE usm_init_urban_surface
451	END INTERFACE usm_init_urban_surface
452
453	INTERFACE usm_material_heat_model
454	MODULE PROCEDURE usm_material_heat_model
455	END INTERFACE usm_material_heat_model
456
457	INTERFACE usm_parin
458	MODULE PROCEDURE usm_parin
459	END INTERFACE usm_parin
460
461	INTERFACE usm_radiation
462	MODULE PROCEDURE usm_radiation
463	END INTERFACE usm_radiation
464
465	INTERFACE usm_read_restart_data
466	MODULE PROCEDURE usm_read_restart_data
467	END INTERFACE usm_read_restart_data
468
469	INTERFACE usm_surface_energy_balance
470	MODULE PROCEDURE usm_surface_energy_balance
471	END INTERFACE usm_surface_energy_balance
472
473	INTERFACE usm_swap_timelevel
474	MODULE PROCEDURE usm_swap_timelevel
475	END INTERFACE usm_swap_timelevel
476
477	INTERFACE usm_wall_heat_flux
478	MODULE PROCEDURE usm_wall_heat_flux
479	MODULE PROCEDURE usm_wall_heat_flux_ij
480	END INTERFACE usm_wall_heat_flux
481
482	INTERFACE usm_write_restart_data
483	MODULE PROCEDURE usm_write_restart_data
484	END INTERFACE usm_write_restart_data
485
486	SAVE
487
488	PRIVATE
489
490	!-- Public parameters, constants and initial values
491	PUBLIC split_diffusion_radiation, &
492	usm_anthropogenic_heat, usm_material_model, mrt_factors, &
493	usm_check_parameters, &
494	usm_energy_balance_land, usm_energy_balance_wall, nrefsteps, &
495	usm_init_urban_surface, usm_radiation, usm_read_restart_data, &
496	usm_wall_heat_flux, &
497	usm_surface_energy_balance, usm_material_heat_model, &
498	usm_swap_timelevel, usm_check_data_output, usm_average_3d_data, &
499	usm_data_output_3d, usm_define_netcdf_grid, usm_parin, &
500	usm_write_restart_data, &
501	nzub, nzut, ra_horiz_coef, usm_lad_rma, &
502	land_category, pedestrant_category, wall_category, roof_category, &
503	write_svf_on_init, read_svf_on_init
504
505
506	CONTAINS
507
508
509	!------------------------------------------------------------------------------!
510	! Description:
511	! ------------
512	!> This subroutine creates the necessary indices of the urban surfaces
513	!> and plant canopy and it allocates the needed arrays for USM
514	!------------------------------------------------------------------------------!
515	SUBROUTINE usm_allocate_urban_surface
516
517	IMPLICIT NONE
518
519	INTEGER(iwp) :: i, j, k, d, l, ir, jr, ids
520	INTEGER(iwp) :: nzubl, nzutl, isurf, ipcgb
521	INTEGER(iwp) :: procid
522
523
524
525
526	!-- auxiliary vars
527	ddxy2 = (/ddy2,ddy2,ddx2,ddx2/) !< 1/dx^2 or 1/dy^2 (in surface normal direction)
528
529	CALL location_message( '', .TRUE. )
530	CALL location_message( ' allocation of needed arrays', .TRUE. )
531	!-- find nzub, nzut, nzu
532	nzubl = minval(nzb_s_inner(nys:nyn,nxl:nxr))
533	nzutl = maxval(nzb_s_inner(nys:nyn,nxl:nxr))
534	nzubl = max(nzubl,nzb)
535
536	IF ( plant_canopy ) THEN
537	!-- allocate needed arrays
538	ALLOCATE( pct(nys:nyn,nxl:nxr) )
539	ALLOCATE( pch(nys:nyn,nxl:nxr) )
540
541	!-- calculate plant canopy height
542	npcbl = 0
543	pct = 0.0_wp
544	pch = 0.0_wp
545	DO i = nxl, nxr
546	DO j = nys, nyn
547	DO k = nzt+1, 0, -1
548	IF ( lad_s(k,j,i) /= 0.0_wp ) THEN
549	!-- we are at the top of the pcs
550	pct(j,i) = k + nzb_s_inner(j,i)
551	pch(j,i) = k
552	npcbl = npcbl + pch(j,i)
553	EXIT
554	ENDIF
555	ENDDO
556	ENDDO
557	ENDDO
558
559	nzutl = max(nzutl, maxval(pct))
560	!-- code of plant canopy model uses parameter pch_index
561	!-- we need to setup it here to right value
562	!-- (pch_index, lad_s and other arrays in PCM are defined flat)
563	pch_index = maxval(pch)
564
565	prototype_lad = maxval(lad_s) * .9_wp !< better be *1.0 if lad is either 0 or maxval(lad) everywhere
566	IF ( prototype_lad <= 0._wp ) prototype_lad = .3_wp
567	!WRITE(message_string, '(a,f6.3)') 'Precomputing effective box optical ' &
568	! // 'depth using prototype leaf area density = ', prototype_lad
569	!CALL message('usm_init_urban_surface', 'PA0520', 0, 0, -1, 6, 0)
570	ENDIF
571
572	nzutl = min(nzutl+nzut_free, nzt)
573
574	#if defined( __parallel )
575	CALL MPI_AllReduce(nzubl,nzub,1,MPI_INTEGER,MPI_MIN,comm2d,ierr);
576	CALL MPI_AllReduce(nzutl,nzut,1,MPI_INTEGER,MPI_MAX,comm2d,ierr);
577	#else
578	nzub = nzubl
579	nzut = nzutl
580	#endif
581
582	!-- global number of urban layers
583	nzu = nzut - nzub + 1
584
585	!-- allocate urban surfaces grid
586	!-- calc number of surfaces in local proc
587	CALL location_message( ' calculation of indices for surfaces', .TRUE. )
588	nsurfl = 0
589	!-- calculate land surface and roof
590	startland = nsurfl+1
591	nsurfl = nsurfl+(nxr-nxl+1)*(nyn-nys+1)
592	endland = nsurfl
593	nlands = endland-startland+1
594
595	!-- calculation of the walls
596	startwall = nsurfl+1
597	DO i = nxl, nxr
598	DO j = nys, nyn
599	!-- test for walls
600	!-- (we don't use array flags because it isn't calculated in case of masking_method=.T.)
601	DO ids = 1, 4 !-- four wall directions
602	jr = min(max(j-jdir(ids),0),ny)
603	ir = min(max(i-idir(ids),0),nx)
604	nsurfl = nsurfl + max(0, nzb_s_inner(jr,ir)-nzb_s_inner(j,i))
605	ENDDO
606	ENDDO
607	ENDDO
608	endwall = nsurfl
609	nwalls = endwall-startwall+1
610
611	!-- range of energy balance surfaces
612	nenergy = 0
613	IF ( usm_energy_balance_land ) THEN
614	startenergy = startland
615	nenergy = nenergy + nlands
616	ELSE
617	startenergy = startwall
618	ENDIF
619	IF ( usm_energy_balance_wall ) THEN
620	endenergy = endwall
621	nenergy = nenergy + nwalls
622	ELSE
623	endenergy = endland
624	ENDIF
625
626	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
627	!-- block of virtual surfaces
628	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
629	!-- calculate sky surfaces
630	startsky = nsurfl+1
631	nsurfl = nsurfl+(nxr-nxl+1)*(nyn-nys+1)
632	endsky = nsurfl
633	nskys = endsky-startsky+1
634
635	!-- border flags
636	#if defined( __parallel )
637	isborder = (/ north_border_pe, south_border_pe, right_border_pe, left_border_pe /)
638	#else
639	isborder = (/.TRUE.,.TRUE.,.TRUE.,.TRUE./)
640	#endif
641	!-- fill array of the limits of the local domain borders
642	ijdb = RESHAPE( (/ nxl,nxr,nyn,nyn,nxl,nxr,nys,nys,nxr,nxr,nys,nyn,nxl,nxl,nys,nyn /), (/4, 4/) )
643	!-- calulation of the free borders of the domain
644	DO ids = 6,9
645	IF ( isborder(ids) ) THEN
646	!-- free border of the domain in direction ids
647	DO i = ijdb(1,ids), ijdb(2,ids)
648	DO j = ijdb(3,ids), ijdb(4,ids)
649	k = nzut - max(nzb_s_inner(j,i), nzb_s_inner(j-jdir(ids),i-idir(ids)))
650	nsurfl = nsurfl + k
651	ENDDO
652	ENDDO
653	ENDIF
654	ENDDO
655
656	!-- fill gridpcbl and pcbl
657	IF ( plant_canopy ) THEN
658	ALLOCATE( pcbl(iz:ix, 1:npcbl) )
659	ALLOCATE( gridpcbl(nzub:nzut,nys:nyn,nxl:nxr) )
660	gridpcbl(:,:,:) = 0
661	ipcgb = 0
662	DO i = nxl, nxr
663	DO j = nys, nyn
664	DO k = nzb_s_inner(j,i)+1, pct(j,i)
665	ipcgb = ipcgb + 1
666	gridpcbl(k,j,i) = ipcgb
667	pcbl(:,ipcgb) = (/ k, j, i /)
668	ENDDO
669	ENDDO
670	ENDDO
671
672	ALLOCATE( pcbinsw( 1:npcbl ) )
673	ALLOCATE( pcbinlw( 1:npcbl ) )
674	ENDIF
675
676	!-- fill surfl
677	ALLOCATE(surfl(4,nsurfl))
678	isurf = 0
679
680	!-- add land surfaces or roofs
681	DO i = nxl, nxr
682	DO j = nys, nyn
683	isurf = isurf + 1
684	k = nzb_s_inner(j,i)+1
685	surfl(:,isurf) = (/iroof,k,j,i/)
686	ENDDO
687	ENDDO
688
689	!-- add walls
690	DO i = nxl, nxr
691	DO j = nys, nyn
692	DO ids = 1, 4 !> four wall directions
693	jr = min(max(j-jdir(ids),0),ny)
694	ir = min(max(i-idir(ids),0),nx)
695	DO k = nzb_s_inner(j,i)+1, nzb_s_inner(jr,ir)
696	isurf = isurf + 1
697	surfl(:,isurf) = (/ids,k,j,i/)
698	ENDDO
699	ENDDO
700	ENDDO
701	ENDDO
702
703	!-- add sky
704	DO i = nxl, nxr
705	DO j = nys, nyn
706	isurf = isurf + 1
707	k = nzut
708	surfl(:,isurf) = (/isky,k,j,i/)
709	ENDDO
710	ENDDO
711
712	!-- calulation of the free borders of the domain
713	DO ids = 6,9
714	IF ( isborder(ids) ) THEN
715	!-- free border of the domain in direction ids
716	DO i = ijdb(1,ids), ijdb(2,ids)
717	DO j = ijdb(3,ids), ijdb(4,ids)
718	DO k = max(nzb_s_inner(j,i),nzb_s_inner(j-jdir(ids),i-idir(ids)))+1, nzut
719	isurf = isurf + 1
720	surfl(:,isurf) = (/ids,k,j,i/)
721	ENDDO
722	ENDDO
723	ENDDO
724	ENDIF
725	ENDDO
726
727	!-- global array surf of indices of surfaces and displacement index array surfstart
728	ALLOCATE(nsurfs(0:numprocs-1))
729
730	#if defined( __parallel )
731	CALL MPI_Allgather(nsurfl,1,MPI_INTEGER,nsurfs,1,MPI_INTEGER,comm2d,ierr)
732	#else
733	nsurfs(0) = nsurfl
734	#endif
735	ALLOCATE(surfstart(0:numprocs))
736	k = 0
737	DO i=0,numprocs-1
738	surfstart(i) = k
739	k = k+nsurfs(i)
740	ENDDO
741	surfstart(numprocs) = k
742	nsurf = k
743	ALLOCATE(surf(4,nsurf))
744
745	#if defined( __parallel )
746	CALL MPI_AllGatherv(surfl, nsurfl4, MPI_INTEGER, surf, nsurfs4, surfstart*4, MPI_INTEGER, comm2d, ierr)
747	#else
748	surf = surfl
749	#endif
750
751	!--
752	!-- allocation of the arrays for direct and diffusion radiation
753	CALL location_message( ' allocation of radiation arrays', .TRUE. )
754	!-- rad_sw_in, rad_lw_in are computed in radiation model,
755	!-- splitting of direct and diffusion part is done
756	!-- in usm_calc_diffusion_radiation for now
757	ALLOCATE( rad_sw_in_dir(nysg:nyng,nxlg:nxrg) )
758	ALLOCATE( rad_sw_in_diff(nysg:nyng,nxlg:nxrg) )
759	ALLOCATE( rad_lw_in_diff(nysg:nyng,nxlg:nxrg) )
760
761	!-- allocate radiation arrays
762	ALLOCATE( surfins(nsurfl) )
763	ALLOCATE( surfinl(nsurfl) )
764	ALLOCATE( surfinsw(nsurfl) )
765	ALLOCATE( surfinlw(nsurfl) )
766	ALLOCATE( surfinswdir(nsurfl) )
767	ALLOCATE( surfinswdif(nsurfl) )
768	ALLOCATE( surfinlwdif(nsurfl) )
769	ALLOCATE( surfoutsl(startenergy:endenergy) )
770	ALLOCATE( surfoutll(startenergy:endenergy) )
771	ALLOCATE( surfoutsw(startenergy:endenergy) )
772	ALLOCATE( surfoutlw(startenergy:endenergy) )
773	ALLOCATE( surfouts(nsurf) ) !TODO: global surfaces without virtual
774	ALLOCATE( surfoutl(nsurf) ) !TODO: global surfaces without virtual
775	ALLOCATE( surfhf(startenergy:endenergy) )
776	ALLOCATE( rad_net_l(startenergy:endenergy) )
777
778	!-- Wall surface model
779	!-- allocate arrays for wall surface model and define pointers
780
781	!-- allocate array of wall types and wall parameters
782	ALLOCATE ( surface_types(startenergy:endenergy) )
783
784	!-- broadband albedo of the land, roof and wall surface
785	!-- for domain border and sky set artifically to 1.0
786	!-- what allows us to calculate heat flux leaving over
787	!-- side and top borders of the domain
788	ALLOCATE ( albedo_surf(nsurfl) )
789	albedo_surf = 1.0_wp
790
791	!-- wall and roof surface parameters
792	ALLOCATE ( isroof_surf(startenergy:endenergy) )
793	ALLOCATE ( emiss_surf(startenergy:endenergy) )
794	ALLOCATE ( lambda_surf(startenergy:endenergy) )
795	ALLOCATE ( c_surface(startenergy:endenergy) )
796	ALLOCATE ( roughness_wall(startenergy:endenergy) )
797
798	!-- allocate wall and roof material parameters
799	ALLOCATE ( thickness_wall(startenergy:endenergy) )
800	ALLOCATE ( lambda_h(nzb_wall:nzt_wall,startenergy:endenergy) )
801	ALLOCATE ( rho_c_wall(nzb_wall:nzt_wall,startenergy:endenergy) )
802
803	!-- allocate wall and roof layers sizes
804	ALLOCATE ( zwn(nzb_wall:nzt_wall) )
805	ALLOCATE ( dz_wall(nzb_wall:nzt_wall+1, startenergy:endenergy) )
806	ALLOCATE ( ddz_wall(nzb_wall:nzt_wall+1, startenergy:endenergy) )
807	ALLOCATE ( dz_wall_stag(nzb_wall:nzt_wall, startenergy:endenergy) )
808	ALLOCATE ( ddz_wall_stag(nzb_wall:nzt_wall, startenergy:endenergy) )
809	ALLOCATE ( zw(nzb_wall:nzt_wall, startenergy:endenergy) )
810
811	!-- allocate wall and roof temperature arrays
812	#if defined( __nopointer )
813	ALLOCATE ( t_surf(startenergy:endenergy) )
814	ALLOCATE ( t_surf_p(startenergy:endenergy) )
815	ALLOCATE ( t_wall(nzb_wall:nzt_wall+1,startenergy:endenergy) )
816	ALLOCATE ( t_wall_p(nzb_wall:nzt_wall+1,startenergy:endenergy) )
817	#else
818	ALLOCATE ( t_surf_1(startenergy:endenergy) )
819	ALLOCATE ( t_surf_2(startenergy:endenergy) )
820	ALLOCATE ( t_wall_1(nzb_wall:nzt_wall+1,startenergy:endenergy) )
821	ALLOCATE ( t_wall_2(nzb_wall:nzt_wall+1,startenergy:endenergy) )
822
823	!-- initial assignment of the pointers
824	t_wall => t_wall_1; t_wall_p => t_wall_2
825	t_surf => t_surf_1; t_surf_p => t_surf_2
826	#endif
827
828	!-- allocate intermediate timestep arrays
829	ALLOCATE ( tt_surface_m(startenergy:endenergy) )
830	ALLOCATE ( tt_wall_m(nzb_wall:nzt_wall+1,startenergy:endenergy) )
831
832	!-- allocate wall heat flux output array
833	ALLOCATE ( wshf(startwall:endwall) )
834	ALLOCATE ( wshf_eb(startenergy:endenergy) )
835	ALLOCATE ( wghf_eb(startenergy:endenergy) )
836
837	!-- set inital values for prognostic quantities
838	tt_surface_m = 0.0_wp
839	tt_wall_m = 0.0_wp
840
841	wshf = 0.0_wp
842	wshf_eb = 0.0_wp
843	wghf_eb = 0.0_wp
844
845	END SUBROUTINE usm_allocate_urban_surface
846
847
848
849	!------------------------------------------------------------------------------!
850	! Description:
851	! ------------
852	!> Sum up and time-average urban surface output quantities as well as allocate
853	!> the array necessary for storing the average.
854	!------------------------------------------------------------------------------!
855	SUBROUTINE usm_average_3d_data( mode, variable )
856
857	IMPLICIT NONE
858
859	CHARACTER (len=*), INTENT(IN) :: mode
860	CHARACTER (len=*), INTENT(IN) :: variable
861
862	INTEGER(iwp) :: i, j, k, l, ids, iwl,istat
863	CHARACTER (len=varnamelength) :: var, surfid
864	INTEGER(iwp), PARAMETER :: nd = 5
865	CHARACTER(len=6), DIMENSION(0:nd-1), PARAMETER :: dirname = (/ '_roof ', '_south', '_north', '_west ', '_east ' /)
866
867	!-- find the real name of the variable
868	var = TRIM(variable)
869	DO i = 0, nd-1
870	k = len(TRIM(var))
871	j = len(TRIM(dirname(i)))
872	IF ( var(k-j+1:k) == dirname(i) ) THEN
873	ids = i
874	var = var(:k-j)
875	EXIT
876	ENDIF
877	ENDDO
878	IF ( ids == -1 ) THEN
879	var = TRIM(variable)
880	ENDIF
881	IF ( var(1:11) == 'usm_t_wall_' .AND. len(TRIM(var)) >= 12 ) THEN
882	!-- wall layers
883	READ(var(12:12), '(I1)', iostat=istat ) iwl
884	IF ( istat == 0 .AND. iwl >= nzb_wall .AND. iwl <= nzt_wall ) THEN
885	var = var(1:10)
886	ELSE
887	!-- wrong wall layer index
888	RETURN
889	ENDIF
890	ENDIF
891
892	IF ( mode == 'allocate' ) THEN
893
894	SELECT CASE ( TRIM( var ) )
895
896	CASE ( 'usm_rad_net' )
897	!-- array of complete radiation balance
898	IF ( .NOT. ALLOCATED(rad_net_av) ) THEN
899	ALLOCATE( rad_net_av(startenergy:endenergy) )
900	rad_net_av = 0.0_wp
901	ENDIF
902
903	CASE ( 'usm_rad_insw' )
904	!-- array of sw radiation falling to surface after i-th reflection
905	IF ( .NOT. ALLOCATED(surfinsw_av) ) THEN
906	ALLOCATE( surfinsw_av(startenergy:endenergy) )
907	surfinsw_av = 0.0_wp
908	ENDIF
909
910	CASE ( 'usm_rad_inlw' )
911	!-- array of lw radiation falling to surface after i-th reflection
912	IF ( .NOT. ALLOCATED(surfinlw_av) ) THEN
913	ALLOCATE( surfinlw_av(startenergy:endenergy) )
914	surfinlw_av = 0.0_wp
915	ENDIF
916
917	CASE ( 'usm_rad_inswdir' )
918	!-- array of direct sw radiation falling to surface from sun
919	IF ( .NOT. ALLOCATED(surfinswdir_av) ) THEN
920	ALLOCATE( surfinswdir_av(startenergy:endenergy) )
921	surfinswdir_av = 0.0_wp
922	ENDIF
923
924	CASE ( 'usm_rad_inswdif' )
925	!-- array of difusion sw radiation falling to surface from sky and borders of the domain
926	IF ( .NOT. ALLOCATED(surfinswdif_av) ) THEN
927	ALLOCATE( surfinswdif_av(startenergy:endenergy) )
928	surfinswdif_av = 0.0_wp
929	ENDIF
930
931	CASE ( 'usm_rad_inswref' )
932	!-- array of sw radiation falling to surface from reflections
933	IF ( .NOT. ALLOCATED(surfinswref_av) ) THEN
934	ALLOCATE( surfinswref_av(startenergy:endenergy) )
935	surfinswref_av = 0.0_wp
936	ENDIF
937
938	CASE ( 'usm_rad_inlwdif' )
939	!-- array of sw radiation falling to surface after i-th reflection
940	IF ( .NOT. ALLOCATED(surfinlwdif_av) ) THEN
941	ALLOCATE( surfinlwdif_av(startenergy:endenergy) )
942	surfinlwdif_av = 0.0_wp
943	ENDIF
944
945	CASE ( 'usm_rad_inlwref' )
946	!-- array of lw radiation falling to surface from reflections
947	IF ( .NOT. ALLOCATED(surfinlwref_av) ) THEN
948	ALLOCATE( surfinlwref_av(startenergy:endenergy) )
949	surfinlwref_av = 0.0_wp
950	ENDIF
951
952	CASE ( 'usm_rad_outsw' )
953	!-- array of sw radiation emitted from surface after i-th reflection
954	IF ( .NOT. ALLOCATED(surfoutsw_av) ) THEN
955	ALLOCATE( surfoutsw_av(startenergy:endenergy) )
956	surfoutsw_av = 0.0_wp
957	ENDIF
958
959	CASE ( 'usm_rad_outlw' )
960	!-- array of lw radiation emitted from surface after i-th reflection
961	IF ( .NOT. ALLOCATED(surfoutlw_av) ) THEN
962	ALLOCATE( surfoutlw_av(startenergy:endenergy) )
963	surfoutlw_av = 0.0_wp
964	ENDIF
965
966	CASE ( 'usm_rad_ressw' )
967	!-- array of residua of sw radiation absorbed in surface after last reflection
968	IF ( .NOT. ALLOCATED(surfins_av) ) THEN
969	ALLOCATE( surfins_av(startenergy:endenergy) )
970	surfins_av = 0.0_wp
971	ENDIF
972
973	CASE ( 'usm_rad_reslw' )
974	!-- array of residua of lw radiation absorbed in surface after last reflection
975	IF ( .NOT. ALLOCATED(surfinl_av) ) THEN
976	ALLOCATE( surfinl_av(startenergy:endenergy) )
977	surfinl_av = 0.0_wp
978	ENDIF
979
980	CASE ( 'usm_rad_hf' )
981	!-- array of heat flux from radiation for surfaces after i-th reflection
982	IF ( .NOT. ALLOCATED(surfhf_av) ) THEN
983	ALLOCATE( surfhf_av(startenergy:endenergy) )
984	surfhf_av = 0.0_wp
985	ENDIF
986
987	CASE ( 'usm_wshf' )
988	!-- array of sensible heat flux from surfaces
989	!-- land surfaces
990	IF ( .NOT. ALLOCATED(wshf_eb_av) ) THEN
991	ALLOCATE( wshf_eb_av(startenergy:endenergy) )
992	wshf_eb_av = 0.0_wp
993	ENDIF
994
995	CASE ( 'usm_wghf' )
996	!-- array of heat flux from ground (wall, roof, land)
997	IF ( .NOT. ALLOCATED(wghf_eb_av) ) THEN
998	ALLOCATE( wghf_eb_av(startenergy:endenergy) )
999	wghf_eb_av = 0.0_wp
1000	ENDIF
1001
1002	CASE ( 'usm_t_surf' )
1003	!-- surface temperature for surfaces
1004	IF ( .NOT. ALLOCATED(t_surf_av) ) THEN
1005	ALLOCATE( t_surf_av(startenergy:endenergy) )
1006	t_surf_av = 0.0_wp
1007	ENDIF
1008
1009	CASE ( 'usm_t_wall' )
1010	!-- wall temperature for iwl layer of walls and land
1011	IF ( .NOT. ALLOCATED(t_wall_av) ) THEN
1012	ALLOCATE( t_wall_av(nzb_wall:nzt_wall,startenergy:endenergy) )
1013	t_wall_av = 0.0_wp
1014	ENDIF
1015
1016	CASE DEFAULT
1017	CONTINUE
1018
1019	END SELECT
1020
1021	ELSEIF ( mode == 'sum' ) THEN
1022
1023	SELECT CASE ( TRIM( var ) )
1024
1025	CASE ( 'usm_rad_net' )
1026	!-- array of complete radiation balance
1027	DO l = startenergy, endenergy
1028	IF ( surfl(id,l) == ids ) THEN
1029	rad_net_av(l) = rad_net_av(l) + rad_net_l(l)
1030	ENDIF
1031	ENDDO
1032
1033	CASE ( 'usm_rad_insw' )
1034	!-- array of sw radiation falling to surface after i-th reflection
1035	DO l = startenergy, endenergy
1036	IF ( surfl(id,l) == ids ) THEN
1037	surfinsw_av(l) = surfinsw_av(l) + surfinsw(l)
1038	ENDIF
1039	ENDDO
1040
1041	CASE ( 'usm_rad_inlw' )
1042	!-- array of lw radiation falling to surface after i-th reflection
1043	DO l = startenergy, endenergy
1044	IF ( surfl(id,l) == ids ) THEN
1045	surfinlw_av(l) = surfinlw_av(l) + surfinlw(l)
1046	ENDIF
1047	ENDDO
1048
1049	CASE ( 'usm_rad_inswdir' )
1050	!-- array of direct sw radiation falling to surface from sun
1051	DO l = startenergy, endenergy
1052	IF ( surfl(id,l) == ids ) THEN
1053	surfinswdir_av(l) = surfinswdir_av(l) + surfinswdir(l)
1054	ENDIF
1055	ENDDO
1056
1057	CASE ( 'usm_rad_inswdif' )
1058	!-- array of difusion sw radiation falling to surface from sky and borders of the domain
1059	DO l = startenergy, endenergy
1060	IF ( surfl(id,l) == ids ) THEN
1061	surfinswdif_av(l) = surfinswdif_av(l) + surfinswdif(l)
1062	ENDIF
1063	ENDDO
1064
1065	CASE ( 'usm_rad_inswref' )
1066	!-- array of sw radiation falling to surface from reflections
1067	DO l = startenergy, endenergy
1068	IF ( surfl(id,l) == ids ) THEN
1069	surfinswref_av(l) = surfinswref_av(l) + surfinsw(l) - &
1070	surfinswdir(l) - surfinswdif(l)
1071	ENDIF
1072	ENDDO
1073
1074	CASE ( 'usm_rad_inlwdif' )
1075	!-- array of sw radiation falling to surface after i-th reflection
1076	DO l = startenergy, endenergy
1077	IF ( surfl(id,l) == ids ) THEN
1078	surfinlwdif_av(l) = surfinlwdif_av(l) + surfinlwdif(l)
1079	ENDIF
1080	ENDDO
1081
1082	CASE ( 'usm_rad_inlwref' )
1083	!-- array of lw radiation falling to surface from reflections
1084	DO l = startenergy, endenergy
1085	IF ( surfl(id,l) == ids ) THEN
1086	surfinlwref_av(l) = surfinlwref_av(l) + &
1087	surfinlw(l) - surfinlwdif(l)
1088	ENDIF
1089	ENDDO
1090
1091	CASE ( 'usm_rad_outsw' )
1092	!-- array of sw radiation emitted from surface after i-th reflection
1093	DO l = startenergy, endenergy
1094	IF ( surfl(id,l) == ids ) THEN
1095	surfoutsw_av(l) = surfoutsw_av(l) + surfoutsw(l)
1096	ENDIF
1097	ENDDO
1098
1099	CASE ( 'usm_rad_outlw' )
1100	!-- array of lw radiation emitted from surface after i-th reflection
1101	DO l = startenergy, endenergy
1102	IF ( surfl(id,l) == ids ) THEN
1103	surfoutlw_av(l) = surfoutlw_av(l) + surfoutlw(l)
1104	ENDIF
1105	ENDDO
1106
1107	CASE ( 'usm_rad_ressw' )
1108	!-- array of residua of sw radiation absorbed in surface after last reflection
1109	DO l = startenergy, endenergy
1110	IF ( surfl(id,l) == ids ) THEN
1111	surfins_av(l) = surfins_av(l) + surfins(l)
1112	ENDIF
1113	ENDDO
1114
1115	CASE ( 'usm_rad_reslw' )
1116	!-- array of residua of lw radiation absorbed in surface after last reflection
1117	DO l = startenergy, endenergy
1118	IF ( surfl(id,l) == ids ) THEN
1119	surfinl_av(l) = surfinl_av(l) + surfinl(l)
1120	ENDIF
1121	ENDDO
1122
1123	CASE ( 'usm_rad_hf' )
1124	!-- array of heat flux from radiation for surfaces after i-th reflection
1125	DO l = startenergy, endenergy
1126	IF ( surfl(id,l) == ids ) THEN
1127	surfhf_av(l) = surfhf_av(l) + surfhf(l)
1128	ENDIF
1129	ENDDO
1130
1131	CASE ( 'usm_wshf' )
1132	!-- array of sensible heat flux from surfaces (land, roof, wall)
1133	DO l = startenergy, endenergy
1134	IF ( surfl(id,l) == ids ) THEN
1135	wshf_eb_av(l) = wshf_eb_av(l) + wshf_eb(l)
1136	ENDIF
1137	ENDDO
1138
1139	CASE ( 'usm_wghf' )
1140	!-- array of heat flux from ground (wall, roof, land)
1141	DO l = startenergy, endenergy
1142	IF ( surfl(id,l) == ids ) THEN
1143	wghf_eb_av(l) = wghf_eb_av(l) + wghf_eb(l)
1144	ENDIF
1145	ENDDO
1146
1147	CASE ( 'usm_t_surf' )
1148	!-- surface temperature for surfaces
1149	DO l = startenergy, endenergy
1150	IF ( surfl(id,l) == ids ) THEN
1151	t_surf_av(l) = t_surf_av(l) + t_surf(l)
1152	ENDIF
1153	ENDDO
1154
1155	CASE ( 'usm_t_wall' )
1156	!-- wall temperature for iwl layer of walls and land
1157	DO l = startenergy, endenergy
1158	IF ( surfl(id,l) == ids ) THEN
1159	t_wall_av(iwl, l) = t_wall_av(iwl,l) + t_wall(iwl, l)
1160	ENDIF
1161	ENDDO
1162
1163	CASE DEFAULT
1164	CONTINUE
1165
1166	END SELECT
1167
1168	ELSEIF ( mode == 'average' ) THEN
1169
1170	SELECT CASE ( TRIM( var ) )
1171
1172	CASE ( 'usm_rad_net' )
1173	!-- array of complete radiation balance
1174	DO l = startenergy, endenergy
1175	IF ( surfl(id,l) == ids ) THEN
1176	rad_net_av(l) = rad_net_av(l) / REAL( average_count_3d, kind=wp )
1177	ENDIF
1178	ENDDO
1179
1180	CASE ( 'usm_rad_insw' )
1181	!-- array of sw radiation falling to surface after i-th reflection
1182	DO l = startenergy, endenergy
1183	IF ( surfl(id,l) == ids ) THEN
1184	surfinsw_av(l) = surfinsw_av(l) / REAL( average_count_3d, kind=wp )
1185	ENDIF
1186	ENDDO
1187
1188	CASE ( 'usm_rad_inlw' )
1189	!-- array of lw radiation falling to surface after i-th reflection
1190	DO l = startenergy, endenergy
1191	IF ( surfl(id,l) == ids ) THEN
1192	surfinlw_av(l) = surfinlw_av(l) / REAL( average_count_3d, kind=wp )
1193	ENDIF
1194	ENDDO
1195
1196	CASE ( 'usm_rad_inswdir' )
1197	!-- array of direct sw radiation falling to surface from sun
1198	DO l = startenergy, endenergy
1199	IF ( surfl(id,l) == ids ) THEN
1200	surfinswdir_av(l) = surfinswdir_av(l) / REAL( average_count_3d, kind=wp )
1201	ENDIF
1202	ENDDO
1203
1204	CASE ( 'usm_rad_inswdif' )
1205	!-- array of difusion sw radiation falling to surface from sky and borders of the domain
1206	DO l = startenergy, endenergy
1207	IF ( surfl(id,l) == ids ) THEN
1208	surfinswdif_av(l) = surfinswdif_av(l) / REAL( average_count_3d, kind=wp )
1209	ENDIF
1210	ENDDO
1211
1212	CASE ( 'usm_rad_inswref' )
1213	!-- array of sw radiation falling to surface from reflections
1214	DO l = startenergy, endenergy
1215	IF ( surfl(id,l) == ids ) THEN
1216	surfinswref_av(l) = surfinswref_av(l) / REAL( average_count_3d, kind=wp )
1217	ENDIF
1218	ENDDO
1219
1220	CASE ( 'usm_rad_inlwdif' )
1221	!-- array of sw radiation falling to surface after i-th reflection
1222	DO l = startenergy, endenergy
1223	IF ( surfl(id,l) == ids ) THEN
1224	surfinlwdif_av(l) = surfinlwdif_av(l) / REAL( average_count_3d, kind=wp )
1225	ENDIF
1226	ENDDO
1227
1228	CASE ( 'usm_rad_inlwref' )
1229	!-- array of lw radiation falling to surface from reflections
1230	DO l = startenergy, endenergy
1231	IF ( surfl(id,l) == ids ) THEN
1232	surfinlwref_av(l) = surfinlwref_av(l) / REAL( average_count_3d, kind=wp )
1233	ENDIF
1234	ENDDO
1235
1236	CASE ( 'usm_rad_outsw' )
1237	!-- array of sw radiation emitted from surface after i-th reflection
1238	DO l = startenergy, endenergy
1239	IF ( surfl(id,l) == ids ) THEN
1240	surfoutsw_av(l) = surfoutsw_av(l) / REAL( average_count_3d, kind=wp )
1241	ENDIF
1242	ENDDO
1243
1244	CASE ( 'usm_rad_outlw' )
1245	!-- array of lw radiation emitted from surface after i-th reflection
1246	DO l = startenergy, endenergy
1247	IF ( surfl(id,l) == ids ) THEN
1248	surfoutlw_av(l) = surfoutlw_av(l) / REAL( average_count_3d, kind=wp )
1249	ENDIF
1250	ENDDO
1251
1252	CASE ( 'usm_rad_ressw' )
1253	!-- array of residua of sw radiation absorbed in surface after last reflection
1254	DO l = startenergy, endenergy
1255	IF ( surfl(id,l) == ids ) THEN
1256	surfins_av(l) = surfins_av(l) / REAL( average_count_3d, kind=wp )
1257	ENDIF
1258	ENDDO
1259
1260	CASE ( 'usm_rad_reslw' )
1261	!-- array of residua of lw radiation absorbed in surface after last reflection
1262	DO l = startenergy, endenergy
1263	IF ( surfl(id,l) == ids ) THEN
1264	surfinl_av(l) = surfinl_av(l) / REAL( average_count_3d, kind=wp )
1265	ENDIF
1266	ENDDO
1267
1268	CASE ( 'usm_rad_hf' )
1269	!-- array of heat flux from radiation for surfaces after i-th reflection
1270	DO l = startenergy, endenergy
1271	IF ( surfl(id,l) == ids ) THEN
1272	surfhf_av(l) = surfhf_av(l) / REAL( average_count_3d, kind=wp )
1273	ENDIF
1274	ENDDO
1275
1276	CASE ( 'usm_wshf' )
1277	!-- array of sensible heat flux from surfaces (land, roof, wall)
1278	DO l = startenergy, endenergy
1279	IF ( surfl(id,l) == ids ) THEN
1280	wshf_eb_av(l) = wshf_eb_av(l) / REAL( average_count_3d, kind=wp )
1281	ENDIF
1282	ENDDO
1283
1284	CASE ( 'usm_wghf' )
1285	!-- array of heat flux from ground (wall, roof, land)
1286	DO l = startenergy, endenergy
1287	IF ( surfl(id,l) == ids ) THEN
1288	wghf_eb_av(l) = wghf_eb_av(l) / REAL( average_count_3d, kind=wp )
1289	ENDIF
1290	ENDDO
1291
1292	CASE ( 'usm_t_surf' )
1293	!-- surface temperature for surfaces
1294	DO l = startenergy, endenergy
1295	IF ( surfl(id,l) == ids ) THEN
1296	t_surf_av(l) = t_surf_av(l) / REAL( average_count_3d, kind=wp )
1297	ENDIF
1298	ENDDO
1299
1300	CASE ( 'usm_t_wall' )
1301	!-- wall temperature for iwl layer of walls and land
1302	DO l = startenergy, endenergy
1303	IF ( surfl(id,l) == ids ) THEN
1304	t_wall_av(iwl, l) = t_wall_av(iwl,l) / REAL( average_count_3d, kind=wp )
1305	ENDIF
1306	ENDDO
1307
1308	END SELECT
1309
1310	ENDIF
1311
1312	END SUBROUTINE usm_average_3d_data
1313
1314
1315	!------------------------------------------------------------------------------!
1316	!> Calculates radiation absorbed by box with given size and LAD.
1317	!>
1318	!> Simulates resol**2 rays (by equally spacing a bounding horizontal square
1319	!> conatining all possible rays that would cross the box) and calculates
1320	!> average transparency per ray. Returns fraction of absorbed radiation flux
1321	!> and area for which this fraction is effective.
1322	!------------------------------------------------------------------------------!
1323	PURE SUBROUTINE usm_box_absorb(boxsize, resol, dens, uvec, area, absorb)
1324	IMPLICIT NONE
1325
1326	REAL(wp), DIMENSION(3), INTENT(in) :: &
1327	boxsize, & !< z, y, x size of box in m
1328	uvec !< z, y, x unit vector of incoming flux
1329	INTEGER(iwp), INTENT(in) :: &
1330	resol !< No. of rays in x and y dimensions
1331	REAL(wp), INTENT(in) :: &
1332	dens !< box density (e.g. Leaf Area Density)
1333	REAL(wp), INTENT(out) :: &
1334	area, & !< horizontal area for flux absorbtion
1335	absorb !< fraction of absorbed flux
1336	REAL(wp) :: &
1337	xshift, yshift, &
1338	xmin, xmax, ymin, ymax, &
1339	xorig, yorig, &
1340	dx1, dy1, dz1, dx2, dy2, dz2, &
1341	crdist, &
1342	transp
1343	INTEGER(iwp) :: &
1344	i, j
1345
1346	xshift = uvec(3) / uvec(1) * boxsize(1)
1347	xmin = min(0._wp, -xshift)
1348	xmax = boxsize(3) + max(0._wp, -xshift)
1349	yshift = uvec(2) / uvec(1) * boxsize(1)
1350	ymin = min(0._wp, -yshift)
1351	ymax = boxsize(2) + max(0._wp, -yshift)
1352
1353	transp = 0._wp
1354	DO i = 1, resol
1355	xorig = xmin + (xmax-xmin) * (i-.5_wp) / resol
1356	DO j = 1, resol
1357	yorig = ymin + (ymax-ymin) * (j-.5_wp) / resol
1358
1359	dz1 = 0._wp
1360	dz2 = boxsize(1)/uvec(1)
1361
1362	IF ( uvec(2) > 0._wp ) THEN
1363	dy1 = -yorig / uvec(2) !< crossing with y=0
1364	dy2 = (boxsize(2)-yorig) / uvec(2) !< crossing with y=boxsize(2)
1365	ELSE IF ( uvec(2) < 0._wp ) THEN
1366	dy1 = (boxsize(2)-yorig) / uvec(2) !< crossing with y=boxsize(2)
1367	dy2 = -yorig / uvec(2) !< crossing with y=0
1368	ELSE !uvec(2)==0
1369	dy1 = -huge(1._wp)
1370	dy2 = huge(1._wp)
1371	ENDIF
1372
1373	IF ( uvec(3) > 0._wp ) THEN
1374	dx1 = -xorig / uvec(3) !< crossing with x=0
1375	dx2 = (boxsize(3)-xorig) / uvec(3) !< crossing with x=boxsize(3)
1376	ELSE IF ( uvec(3) < 0._wp ) THEN
1377	dx1 = (boxsize(3)-xorig) / uvec(3) !< crossing with x=boxsize(3)
1378	dx2 = -xorig / uvec(3) !< crossing with x=0
1379	ELSE !uvec(1)==0
1380	dx1 = -huge(1._wp)
1381	dx2 = huge(1._wp)
1382	ENDIF
1383
1384	crdist = max(0._wp, (min(dz2, dy2, dx2) - max(dz1, dy1, dx1)))
1385	transp = transp + exp(-ext_coef * dens * crdist)
1386	ENDDO
1387	ENDDO
1388	transp = transp / resol**2
1389	area = (boxsize(3)+xshift)*(boxsize(2)+yshift)
1390	absorb = 1._wp - transp
1391
1392	END SUBROUTINE usm_box_absorb
1393
1394
1395	!------------------------------------------------------------------------------!
1396	! Description:
1397	! ------------
1398	!> This subroutine splits direct and diffusion dw radiation
1399	!> It sould not be called in case the radiation model already does it
1400	!> It follows <CITATION>
1401	!------------------------------------------------------------------------------!
1402	SUBROUTINE usm_calc_diffusion_radiation
1403
1404	REAL(wp), PARAMETER :: sol_const = 1367.0_wp !< solar conbstant
1405	REAL(wp), PARAMETER :: lowest_solarUp = 0.1_wp !< limit the sun elevation to protect stability of the calculation
1406	INTEGER(iwp) :: i, j
1407	REAL(wp), PARAMETER :: year_seconds = 86400._wp * 365._wp
1408	REAL(wp) :: year_angle !< angle
1409	REAL(wp) :: etr !< extraterestrial radiation
1410	REAL(wp) :: corrected_solarUp !< corrected solar up radiation
1411	REAL(wp) :: horizontalETR !< horizontal extraterestrial radiation
1412	REAL(wp) :: clearnessIndex !< clearness index
1413	REAL(wp) :: diff_frac !< diffusion fraction of the radiation
1414
1415
1416	!-- Calculate current day and time based on the initial values and simulation time
1417	year_angle = ((day_init*86400) + time_utc_init+time_since_reference_point) &
1418	/ year_seconds * 2.0_wp * pi
1419
1420	etr = sol_const * (1.00011_wp + &
1421	0.034221_wp * cos(year_angle) + &
1422	0.001280_wp * sin(year_angle) + &
1423	0.000719_wp * cos(2.0_wp * year_angle) + &
1424	0.000077_wp * sin(2.0_wp * year_angle))
1425
1426	!--
1427	!-- Under a very low angle, we keep extraterestrial radiation at
1428	!-- the last small value, therefore the clearness index will be pushed
1429	!-- towards 0 while keeping full continuity.
1430	!--
1431	IF ( zenith(0) <= lowest_solarUp ) THEN
1432	corrected_solarUp = lowest_solarUp
1433	ELSE
1434	corrected_solarUp = zenith(0)
1435	ENDIF
1436
1437	horizontalETR = etr * corrected_solarUp
1438
1439	DO i = nxlg, nxrg
1440	DO j = nysg, nyng
1441	clearnessIndex = rad_sw_in(0,j,i) / horizontalETR
1442	diff_frac = 1.0_wp / (1.0_wp + exp(-5.0033_wp + 8.6025_wp * clearnessIndex))
1443	rad_sw_in_diff(j,i) = rad_sw_in(0,j,i) * diff_frac
1444	rad_sw_in_dir(j,i) = rad_sw_in(0,j,i) * (1.0_wp - diff_frac)
1445	rad_lw_in_diff(j,i) = rad_lw_in(0,j,i)
1446	ENDDO
1447	ENDDO
1448
1449	END SUBROUTINE usm_calc_diffusion_radiation
1450
1451
1452	!------------------------------------------------------------------------------!
1453	! Description:
1454	! ------------
1455	!> Calculates shape view factors SVF and plant sink canopy factors PSCF
1456	!> !!!!!DESCRIPTION!!!!!!!!!!
1457	!------------------------------------------------------------------------------!
1458	SUBROUTINE usm_calc_svf
1459
1460	IMPLICIT NONE
1461
1462	INTEGER(iwp) :: i, j, k, l, d, ip, jp
1463	INTEGER(iwp) :: isvf, ksvf, icsf, kcsf, npcsfl, isvf_surflt, imrtt, imrtf
1464	INTEGER(iwp) :: sd, td, ioln, iproc
1465	REAL(wp), DIMENSION(0:9) :: facearea
1466	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzterrl, planthl
1467	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: csflt, pcsflt
1468	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: kcsflt,kpcsflt
1469	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: icsflt,dcsflt,ipcsflt,dpcsflt
1470	REAL(wp), DIMENSION(3) :: uv
1471	LOGICAL :: visible
1472	REAL(wp), DIMENSION(3) :: sa, ta !< real coordinates z,y,x of source and target
1473	REAL(wp) :: transparency, rirrf, sqdist, svfsum
1474	INTEGER(iwp) :: isurflt, isurfs, isurflt_prev
1475	INTEGER(iwp) :: itx, ity, itz
1476	CHARACTER(len=7) :: pid_char = ''
1477	INTEGER(iwp) :: win_lad, minfo
1478	REAL(wp), DIMENSION(:,:,:), POINTER :: lad_s_rma !< fortran pointer, but lower bounds are 1
1479	TYPE(c_ptr) :: lad_s_rma_p !< allocated c pointer
1480	INTEGER(kind=MPI_ADDRESS_KIND) :: size_lad_rma
1481
1482	!-- calculation of the SVF
1483	CALL location_message( ' calculation of SVF and CSF', .TRUE. )
1484
1485	!-- precalculate face areas for different face directions using normal vector
1486	DO d = 0, 9
1487	facearea(d) = 1._wp
1488	IF ( idir(d) == 0 ) facearea(d) = facearea(d) * dx
1489	IF ( jdir(d) == 0 ) facearea(d) = facearea(d) * dy
1490	IF ( kdir(d) == 0 ) facearea(d) = facearea(d) * dz
1491	ENDDO
1492
1493	!-- initialize variables and temporary arrays for calculation of svf and csf
1494	nsvfl = 0
1495	ncsfl = 0
1496	nsvfla = gasize
1497	msvf = 1
1498	ALLOCATE( asvf1(nsvfla) )
1499	asvf => asvf1
1500	IF ( plant_canopy ) THEN
1501	ncsfla = gasize
1502	mcsf = 1
1503	ALLOCATE( acsf1(ncsfla) )
1504	acsf => acsf1
1505	ENDIF
1506
1507	!-- initialize temporary terrain and plant canopy height arrays (global 2D array!)
1508	ALLOCATE( nzterr(0:(nx+1)*(ny+1)-1) )
1509	#if defined( __parallel )
1510	ALLOCATE( nzterrl(nys:nyn,nxl:nxr) )
1511	nzterrl = nzb_s_inner(nys:nyn,nxl:nxr)
1512	CALL MPI_AllGather( nzterrl, nnx*nny, MPI_INTEGER, &
1513	nzterr, nnx*nny, MPI_INTEGER, comm2d, ierr )
1514	DEALLOCATE(nzterrl)
1515	#else
1516	nzterr = RESHAPE( nzb_s_inner(nys:nyn,nxl:nxr), (/(nx+1)*(ny+1)/) )
1517	#endif
1518	IF ( plant_canopy ) THEN
1519	ALLOCATE( plantt(0:(nx+1)*(ny+1)-1) )
1520	maxboxesg = nx + ny + nzu + 1
1521	!-- temporary arrays storing values for csf calculation during raytracing
1522	ALLOCATE( boxes(3, maxboxesg) )
1523	ALLOCATE( crlens(maxboxesg) )
1524
1525	#if defined( __parallel )
1526	ALLOCATE( planthl(nys:nyn,nxl:nxr) )
1527	planthl = pch(nys:nyn,nxl:nxr)
1528
1529	CALL MPI_AllGather( planthl, nnx*nny, MPI_INTEGER, &
1530	plantt, nnx*nny, MPI_INTEGER, comm2d, ierr )
1531	DEALLOCATE( planthl )
1532
1533	!-- temporary arrays storing values for csf calculation during raytracing
1534	ALLOCATE( lad_ip(maxboxesg) )
1535	ALLOCATE( lad_disp(maxboxesg) )
1536
1537	IF ( usm_lad_rma ) THEN
1538	ALLOCATE( lad_s_ray(maxboxesg) )
1539
1540	! set conditions for RMA communication
1541	CALL MPI_Info_create(minfo, ierr)
1542	CALL MPI_Info_set(minfo, 'accumulate_ordering', '', ierr)
1543	CALL MPI_Info_set(minfo, 'accumulate_ops', 'same_op', ierr)
1544	CALL MPI_Info_set(minfo, 'same_size', 'true', ierr)
1545	CALL MPI_Info_set(minfo, 'same_disp_unit', 'true', ierr)
1546
1547	!-- Allocate and initialize the MPI RMA window
1548	!-- must be in accordance with allocation of lad_s in plant_canopy_model
1549	!-- optimization of memory should be done
1550	!-- Argument X of function c_sizeof(X) needs arbitrary REAL(wp) value, set to 1.0_wp for now
1551	size_lad_rma = c_sizeof(1.0_wp)nnxnny*nzu
1552	CALL MPI_Win_allocate(size_lad_rma, c_sizeof(1.0_wp), minfo, comm2d, &
1553	lad_s_rma_p, win_lad, ierr)
1554	CALL c_f_pointer(lad_s_rma_p, lad_s_rma, (/ nzu, nny, nnx /))
1555	usm_lad(nzub:, nys:, nxl:) => lad_s_rma(:,:,:)
1556	ELSE
1557	ALLOCATE(usm_lad(nzub:nzut, nys:nyn, nxl:nxr))
1558	ENDIF
1559	#else
1560	plantt = RESHAPE( pct(nys:nyn,nxl:nxr), (/(nx+1)*(ny+1)/) )
1561	ALLOCATE(usm_lad(nzub:nzut, nys:nyn, nxl:nxr))
1562	#endif
1563	usm_lad(:,:,:) = 0._wp
1564	DO i = nxl, nxr
1565	DO j = nys, nyn
1566	k = nzb_s_inner(j, i)
1567	usm_lad(k:nzut, j, i) = lad_s(0:nzut-k, j, i)
1568	ENDDO
1569	ENDDO
1570
1571	#if defined( __parallel )
1572	IF ( usm_lad_rma ) THEN
1573	CALL MPI_Info_free(minfo, ierr)
1574	CALL MPI_Win_lock_all(0, win_lad, ierr)
1575	ELSE
1576	ALLOCATE( usm_lad_g(0:(nx+1)(ny+1)nzu-1) )
1577	CALL MPI_AllGather( usm_lad, nnxnnynzu, MPI_REAL, &
1578	usm_lad_g, nnxnnynzu, MPI_REAL, comm2d, ierr )
1579	ENDIF
1580	#endif
1581	ENDIF
1582
1583	IF ( mrt_factors ) THEN
1584	OPEN(153, file='MRT_TARGETS', access='SEQUENTIAL', &
1585	action='READ', status='OLD', form='FORMATTED', err=524)
1586	OPEN(154, file='MRT_FACTORS'//myid_char, access='DIRECT', recl=(54+28), &
1587	action='WRITE', status='REPLACE', form='UNFORMATTED', err=525)
1588	imrtf = 1
1589	DO
1590	READ(153, *, end=526, err=524) imrtt, i, j, k
1591	IF ( i < nxl .OR. i > nxr &
1592	.OR. j < nys .OR. j > nyn ) CYCLE
1593	ta = (/ REAL(k), REAL(j), REAL(i) /)
1594
1595	DO isurfs = 1, nsurf
1596	IF ( .NOT. usm_facing(i, j, k, -1, &
1597	surf(ix, isurfs), surf(iy, isurfs), &
1598	surf(iz, isurfs), surf(id, isurfs)) ) THEN
1599	CYCLE
1600	ENDIF
1601
1602	sd = surf(id, isurfs)
1603	sa = (/ REAL(surf(iz, isurfs), wp) - 0.5_wp * kdir(sd), &
1604	REAL(surf(iy, isurfs), wp) - 0.5_wp * jdir(sd), &
1605	REAL(surf(ix, isurfs), wp) - 0.5_wp * idir(sd) /)
1606
1607	!-- unit vector source -> target
1608	uv = (/ (ta(1)-sa(1))dz, (ta(2)-sa(2))dy, (ta(3)-sa(3))*dx /)
1609	sqdist = SUM(uv(:)**2)
1610	uv = uv / SQRT(sqdist)
1611
1612	!-- irradiance factor - see svf. Here we consider that target face is always normal,
1613	!-- i.e. the second dot product equals 1
1614	rirrf = dot_product((/ kdir(sd), jdir(sd), idir(sd) /), uv) &
1615	/ (pi * sqdist) * facearea(sd)
1616
1617	!-- raytrace while not creating any canopy sink factors
1618	CALL usm_raytrace(sa, ta, isurfs, rirrf, 1._wp, .FALSE., &
1619	visible, transparency, win_lad)
1620	IF ( .NOT. visible ) CYCLE
1621
1622	!rsvf = rirrf * transparency
1623	WRITE(154, rec=imrtf, err=525) INT(imrtt, kind=4), &
1624	INT(surf(id, isurfs), kind=4), &
1625	INT(surf(iz, isurfs), kind=4), &
1626	INT(surf(iy, isurfs), kind=4), &
1627	INT(surf(ix, isurfs), kind=4), &
1628	REAL(rirrf, kind=8), REAL(transparency, kind=8)
1629	imrtf = imrtf + 1
1630
1631	ENDDO !< isurfs
1632	ENDDO !< MRT_TARGETS record
1633
1634	524 message_string = 'error reading file MRT_TARGETS'
1635	CALL message( 'usm_calc_svf', 'PA0524', 1, 2, 0, 6, 0 )
1636
1637	525 message_string = 'error writing file MRT_FACTORS'//myid_char
1638	CALL message( 'usm_calc_svf', 'PA0525', 1, 2, 0, 6, 0 )
1639
1640	526 CLOSE(153)
1641	CLOSE(154)
1642	ENDIF !< mrt_factors
1643
1644
1645	DO isurflt = 1, nsurfl
1646	!-- determine face centers
1647	td = surfl(id, isurflt)
1648	IF ( td >= isky .AND. .NOT. plant_canopy ) CYCLE
1649	ta = (/ REAL(surfl(iz, isurflt), wp) - 0.5_wp * kdir(td), &
1650	REAL(surfl(iy, isurflt), wp) - 0.5_wp * jdir(td), &
1651	REAL(surfl(ix, isurflt), wp) - 0.5_wp * idir(td) /)
1652	DO isurfs = 1, nsurf
1653	IF ( .NOT. usm_facing(surfl(ix, isurflt), surfl(iy, isurflt), &
1654	surfl(iz, isurflt), surfl(id, isurflt), &
1655	surf(ix, isurfs), surf(iy, isurfs), &
1656	surf(iz, isurfs), surf(id, isurfs)) ) THEN
1657	CYCLE
1658	ENDIF
1659
1660	sd = surf(id, isurfs)
1661	sa = (/ REAL(surf(iz, isurfs), wp) - 0.5_wp * kdir(sd), &
1662	REAL(surf(iy, isurfs), wp) - 0.5_wp * jdir(sd), &
1663	REAL(surf(ix, isurfs), wp) - 0.5_wp * idir(sd) /)
1664
1665	!-- unit vector source -> target
1666	uv = (/ (ta(1)-sa(1))dz, (ta(2)-sa(2))dy, (ta(3)-sa(3))*dx /)
1667	sqdist = SUM(uv(:)**2)
1668	uv = uv / SQRT(sqdist)
1669
1670	!-- irradiance factor (our unshaded shape view factor) = view factor per differential target area * source area
1671	rirrf = dot_product((/ kdir(sd), jdir(sd), idir(sd) /), uv) & ! cosine of source normal and direction
1672	* dot_product((/ kdir(td), jdir(td), idir(td) /), -uv) & ! cosine of target normal and reverse direction
1673	/ (pi * sqdist) & ! square of distance between centers
1674	* facearea(sd)
1675
1676	!-- raytrace + process plant canopy sinks within
1677	CALL usm_raytrace(sa, ta, isurfs, rirrf, facearea(td), .TRUE., &
1678	visible, transparency, win_lad)
1679
1680	IF ( .NOT. visible ) CYCLE
1681	IF ( td >= isky ) CYCLE !< we calculated these only for raytracing
1682	!< to find plant canopy sinks, we don't need svf for them
1683	! rsvf = rirrf * transparency
1684
1685	!-- write to the svf array
1686	nsvfl = nsvfl + 1
1687	!-- check dimmension of asvf array and enlarge it if needed
1688	IF ( nsvfla < nsvfl ) THEN
1689	k = nsvfla * 2
1690	IF ( msvf == 0 ) THEN
1691	msvf = 1
1692	ALLOCATE( asvf1(k) )
1693	asvf => asvf1
1694	asvf1(1:nsvfla) = asvf2
1695	DEALLOCATE( asvf2 )
1696	ELSE
1697	msvf = 0
1698	ALLOCATE( asvf2(k) )
1699	asvf => asvf2
1700	asvf2(1:nsvfla) = asvf1
1701	DEALLOCATE( asvf1 )
1702	ENDIF
1703	nsvfla = k
1704	ENDIF
1705	!-- write svf values into the array
1706	asvf(nsvfl)%isurflt = isurflt
1707	asvf(nsvfl)%isurfs = isurfs
1708	asvf(nsvfl)%rsvf = rirrf !we postopne multiplication by transparency
1709	asvf(nsvfl)%rtransp = transparency !a.k.a. Direct Irradiance Factor
1710	ENDDO
1711	ENDDO
1712
1713	CALL location_message( ' waiting for completion of SVF and CSF calculation in all processes', .TRUE. )
1714	!-- deallocate temporary global arrays
1715	DEALLOCATE(nzterr)
1716
1717	IF ( plant_canopy ) THEN
1718	!-- finalize mpi_rma communication and deallocate temporary arrays
1719	#if defined( __parallel )
1720	IF ( usm_lad_rma ) THEN
1721	CALL MPI_Win_flush_all(win_lad, ierr)
1722	!-- unlock MPI window
1723	CALL MPI_Win_unlock_all(win_lad, ierr)
1724	!-- free MPI window
1725	CALL MPI_Win_free(win_lad, ierr)
1726
1727	!-- deallocate temporary arrays storing values for csf calculation during raytracing
1728	DEALLOCATE( lad_s_ray )
1729	!-- usm_lad is the pointer to lad_s_rma in case of usm_lad_rma
1730	!-- and must not be deallocated here
1731	ELSE
1732	DEALLOCATE(usm_lad)
1733	DEALLOCATE(usm_lad_g)
1734	ENDIF
1735	#else
1736	DEALLOCATE(usm_lad)
1737	#endif
1738	DEALLOCATE( boxes )
1739	DEALLOCATE( crlens )
1740	DEALLOCATE( plantt )
1741	ENDIF
1742
1743	CALL location_message( ' calculation of the complete SVF array', .TRUE. )
1744
1745	!-- sort svf ( a version of quicksort )
1746	CALL quicksort_svf(asvf,1,nsvfl)
1747
1748	ALLOCATE( svf(ndsvf,nsvfl) )
1749	ALLOCATE( svfsurf(idsvf,nsvfl) )
1750
1751	!< load svf from the structure array to plain arrays
1752	isurflt_prev = -1
1753	ksvf = 1
1754	svfsum = 0._wp
1755	DO isvf = 1, nsvfl
1756	!-- normalize svf per target face
1757	IF ( asvf(ksvf)%isurflt /= isurflt_prev ) THEN
1758	IF ( isurflt_prev /= -1 .AND. svfsum /= 0._wp ) THEN
1759	!-- TODO detect and log when normalization differs too much from 1
1760	svf(1, isvf_surflt:isvf-1) = svf(1, isvf_surflt:isvf-1) / svfsum
1761	ENDIF
1762	isurflt_prev = asvf(ksvf)%isurflt
1763	isvf_surflt = isvf
1764	svfsum = asvf(ksvf)%rsvf !?? / asvf(ksvf)%rtransp
1765	ELSE
1766	svfsum = svfsum + asvf(ksvf)%rsvf !?? / asvf(ksvf)%rtransp
1767	ENDIF
1768
1769	svf(:, isvf) = (/ asvf(ksvf)%rsvf, asvf(ksvf)%rtransp /)
1770	svfsurf(:, isvf) = (/ asvf(ksvf)%isurflt, asvf(ksvf)%isurfs /)
1771
1772	!-- next element
1773	ksvf = ksvf + 1
1774	ENDDO
1775
1776	IF ( isurflt_prev /= -1 .AND. svfsum /= 0._wp ) THEN
1777	!-- TODO detect and log when normalization differs too much from 1
1778	svf(1, isvf_surflt:nsvfl) = svf(1, isvf_surflt:nsvfl) / svfsum
1779	ENDIF
1780
1781	!-- deallocate temporary asvf array
1782	!-- DEALLOCATE(asvf) - ifort has a problem with deallocation of allocatable target
1783	!-- via pointing pointer - we need to test original targets
1784	IF ( ALLOCATED(asvf1) ) THEN
1785	DEALLOCATE(asvf1)
1786	ENDIF
1787	IF ( ALLOCATED(asvf2) ) THEN
1788	DEALLOCATE(asvf2)
1789	ENDIF
1790
1791	npcsfl = 0
1792	IF ( plant_canopy ) THEN
1793
1794	CALL location_message( ' calculation of the complete CSF array', .TRUE. )
1795
1796	!-- sort and merge csf for the last time, keeping the array size to minimum
1797	CALL usm_merge_and_grow_csf(-1)
1798
1799	!-- aggregate csb among processors
1800	!-- allocate necessary arrays
1801	ALLOCATE( csflt(ndcsf,max(ncsfl,ndcsf)) )
1802	ALLOCATE( kcsflt(kdcsf,max(ncsfl,kdcsf)) )
1803	ALLOCATE( icsflt(0:numprocs-1) )
1804	ALLOCATE( dcsflt(0:numprocs-1) )
1805	ALLOCATE( ipcsflt(0:numprocs-1) )
1806	ALLOCATE( dpcsflt(0:numprocs-1) )
1807
1808	!-- fill out arrays of csf values and
1809	!-- arrays of number of elements and displacements
1810	!-- for particular precessors
1811	icsflt = 0
1812	dcsflt = 0
1813	ip = -1
1814	j = -1
1815	d = 0
1816	DO kcsf = 1, ncsfl
1817	j = j+1
1818	IF ( acsf(kcsf)%ip /= ip ) THEN
1819	!-- new block of the processor
1820	!-- number of elements of previous block
1821	IF ( ip>=0) icsflt(ip) = j
1822	d = d+j
1823	!-- blank blocks
1824	DO jp = ip+1, acsf(kcsf)%ip-1
1825	!-- number of elements is zero, displacement is equal to previous
1826	icsflt(jp) = 0
1827	dcsflt(jp) = d
1828	ENDDO
1829	!-- the actual block
1830	ip = acsf(kcsf)%ip
1831	dcsflt(ip) = d
1832	j = 0
1833	ENDIF
1834	!-- fill out real values of rsvf, rtransp
1835	csflt(1,kcsf) = acsf(kcsf)%rsvf
1836	csflt(2,kcsf) = acsf(kcsf)%rtransp
1837	!-- fill out integer values of itz,ity,itx,isurfs
1838	kcsflt(1,kcsf) = acsf(kcsf)%itz
1839	kcsflt(2,kcsf) = acsf(kcsf)%ity
1840	kcsflt(3,kcsf) = acsf(kcsf)%itx
1841	kcsflt(4,kcsf) = acsf(kcsf)%isurfs
1842	ENDDO
1843	!-- last blank blocks at the end of array
1844	j = j+1
1845	IF ( ip>=0 ) icsflt(ip) = j
1846	d = d+j
1847	DO jp = ip+1, numprocs-1
1848	!-- number of elements is zero, displacement is equal to previous
1849	icsflt(jp) = 0
1850	dcsflt(jp) = d
1851	ENDDO
1852
1853	!-- deallocate temporary acsf array
1854	!-- DEALLOCATE(acsf) - ifort has a problem with deallocation of allocatable target
1855	!-- via pointing pointer - we need to test original targets
1856	IF ( ALLOCATED(acsf1) ) THEN
1857	DEALLOCATE(acsf1)
1858	ENDIF
1859	IF ( ALLOCATED(acsf2) ) THEN
1860	DEALLOCATE(acsf2)
1861	ENDIF
1862
1863	#if defined( __parallel )
1864	!-- scatter and gather the number of elements to and from all processor
1865	!-- and calculate displacements
1866	CALL MPI_AlltoAll(icsflt,1,MPI_INTEGER,ipcsflt,1,MPI_INTEGER,comm2d, ierr)
1867
1868	npcsfl = SUM(ipcsflt)
1869	d = 0
1870	DO i = 0, numprocs-1
1871	dpcsflt(i) = d
1872	d = d + ipcsflt(i)
1873	ENDDO
1874
1875	!-- exchange csf fields between processors
1876	ALLOCATE( pcsflt(ndcsf,max(npcsfl,ndcsf)) )
1877	ALLOCATE( kpcsflt(kdcsf,max(npcsfl,kdcsf)) )
1878	CALL MPI_AlltoAllv(csflt, ndcsficsflt, ndcsfdcsflt, MPI_REAL, &
1879	pcsflt, ndcsfipcsflt, ndcsfdpcsflt, MPI_REAL, comm2d, ierr)
1880	CALL MPI_AlltoAllv(kcsflt, kdcsficsflt, kdcsfdcsflt, MPI_INTEGER, &
1881	kpcsflt, kdcsfipcsflt, kdcsfdpcsflt, MPI_INTEGER, comm2d, ierr)
1882
1883	#else
1884	npcsfl = ncsfl
1885	ALLOCATE( pcsflt(ndcsf,max(npcsfl,ndcsf)) )
1886	ALLOCATE( kpcsflt(kdcsf,max(npcsfl,kdcsf)) )
1887	pcsflt = csflt
1888	kpcsflt = kcsflt
1889	#endif
1890
1891	!-- deallocate temporary arrays
1892	DEALLOCATE( csflt )
1893	DEALLOCATE( kcsflt )
1894	DEALLOCATE( icsflt )
1895	DEALLOCATE( dcsflt )
1896	DEALLOCATE( ipcsflt )
1897	DEALLOCATE( dpcsflt )
1898
1899	!-- sort csf ( a version of quicksort )
1900	CALL quicksort_csf2(kpcsflt, pcsflt, 1, npcsfl)
1901
1902	!-- aggregate canopy sink factor records with identical box & source
1903	!-- againg across all values from all processors
1904	IF ( npcsfl > 0 ) THEN
1905	icsf = 1 !< reading index
1906	kcsf = 1 !< writing index
1907	DO while (icsf < npcsfl)
1908	!-- here kpcsf(kcsf) already has values from kpcsf(icsf)
1909	IF ( kpcsflt(3,icsf) == kpcsflt(3,icsf+1) .AND. &
1910	kpcsflt(2,icsf) == kpcsflt(2,icsf+1) .AND. &
1911	kpcsflt(1,icsf) == kpcsflt(1,icsf+1) .AND. &
1912	kpcsflt(4,icsf) == kpcsflt(4,icsf+1) ) THEN
1913	!-- We could simply take either first or second rtransp, both are valid. As a very simple heuristic about which ray
1914	!-- probably passes nearer the center of the target box, we choose DIF from the entry with greater CSF, since that
1915	!-- might mean that the traced beam passes longer through the canopy box.
1916	IF ( pcsflt(1,kcsf) < pcsflt(1,icsf+1) ) THEN
1917	pcsflt(2,kcsf) = pcsflt(2,icsf+1)
1918	ENDIF
1919	pcsflt(1,kcsf) = pcsflt(1,kcsf) + pcsflt(1,icsf+1)
1920
1921	!-- advance reading index, keep writing index
1922	icsf = icsf + 1
1923	ELSE
1924	!-- not identical, just advance and copy
1925	icsf = icsf + 1
1926	kcsf = kcsf + 1
1927	kpcsflt(:,kcsf) = kpcsflt(:,icsf)
1928	pcsflt(:,kcsf) = pcsflt(:,icsf)
1929	ENDIF
1930	ENDDO
1931	!-- last written item is now also the last item in valid part of array
1932	npcsfl = kcsf
1933	ENDIF
1934
1935	ncsfl = npcsfl
1936	IF ( ncsfl > 0 ) THEN
1937	ALLOCATE( csf(ndcsf,ncsfl) )
1938	ALLOCATE( csfsurf(idcsf,ncsfl) )
1939	DO icsf = 1, ncsfl
1940	csf(:,icsf) = pcsflt(:,icsf)
1941	csfsurf(1,icsf) = gridpcbl(kpcsflt(1,icsf),kpcsflt(2,icsf),kpcsflt(3,icsf))
1942	csfsurf(2,icsf) = kpcsflt(4,icsf)
1943	ENDDO
1944	ENDIF
1945
1946	!-- deallocation of temporary arrays
1947	DEALLOCATE( pcsflt )
1948	DEALLOCATE( kpcsflt )
1949
1950	ENDIF
1951
1952	RETURN
1953
1954	301 WRITE( message_string, * ) &
1955	'I/O error when processing shape view factors / ', &
1956	'plant canopy sink factors / direct irradiance factors.'
1957	CALL message( 'init_urban_surface', 'PA0502', 2, 2, 0, 6, 0 )
1958
1959	END SUBROUTINE usm_calc_svf
1960
1961
1962	!------------------------------------------------------------------------------!
1963	!
1964	! Description:
1965	! ------------
1966	!> Subroutine checks variables and assigns units.
1967	!> It is caaled out from subroutine check_parameters.
1968	!------------------------------------------------------------------------------!
1969	SUBROUTINE usm_check_data_output( variable, unit )
1970
1971	IMPLICIT NONE
1972
1973	CHARACTER (len=*),INTENT(IN) :: variable !:
1974	CHARACTER (len=*),INTENT(OUT) :: unit !:
1975
1976	CHARACTER (len=varnamelength) :: var
1977
1978	var = TRIM(variable)
1979	IF ( var(1:12) == 'usm_rad_net_' .OR. var(1:13) == 'usm_rad_insw_' .OR. &
1980	var(1:13) == 'usm_rad_inlw_' .OR. var(1:16) == 'usm_rad_inswdir_' .OR. &
1981	var(1:16) == 'usm_rad_inswdif_' .OR. var(1:16) == 'usm_rad_inswref_' .OR. &
1982	var(1:16) == 'usm_rad_inlwdif_' .OR. var(1:16) == 'usm_rad_inlwref_' .OR. &
1983	var(1:14) == 'usm_rad_outsw_' .OR. var(1:14) == 'usm_rad_outlw_' .OR. &
1984	var(1:14) == 'usm_rad_ressw_' .OR. var(1:14) == 'usm_rad_reslw_' .OR. &
1985	var(1:11) == 'usm_rad_hf_' .OR. &
1986	var(1:9) == 'usm_wshf_' .OR. var(1:9) == 'usm_wghf_' ) THEN
1987	unit = 'W/m2'
1988	ELSE IF ( var(1:10) == 'usm_t_surf' .OR. var(1:10) == 'usm_t_wall' ) THEN
1989	unit = 'K'
1990	ELSE IF ( var(1:9) == 'usm_surfz' .OR. var(1:7) == 'usm_svf' .OR. &
1991	var(1:7) == 'usm_dif' .OR. var(1:11) == 'usm_surfcat' .OR. &
1992	var(1:11) == 'usm_surfalb' .OR. var(1:12) == 'usm_surfemis') THEN
1993	unit = '1'
1994	ELSE IF ( plant_canopy .AND. var(1:7) == 'usm_lad' ) THEN
1995	unit = 'm2/m3'
1996	ELSE IF ( plant_canopy .AND. var(1:13) == 'usm_canopy_hr' ) THEN
1997	unit = 'K/s'
1998	ELSE
1999	unit = 'illegal'
2000	ENDIF
2001
2002	END SUBROUTINE usm_check_data_output
2003
2004
2005	!------------------------------------------------------------------------------!
2006	! Description:
2007	! ------------
2008	!> Check parameters routine for urban surface model
2009	!------------------------------------------------------------------------------!
2010	SUBROUTINE usm_check_parameters
2011
2012	USE control_parameters, &
2013	ONLY: bc_pt_b, bc_q_b, constant_flux_layer, large_scale_forcing, &
2014	lsf_surf, topography
2015
2016	!
2017	!-- Dirichlet boundary conditions are required as the surface fluxes are
2018	!-- calculated from the temperature/humidity gradients in the urban surface
2019	!-- model
2020	IF ( bc_pt_b == 'neumann' .OR. bc_q_b == 'neumann' ) THEN
2021	message_string = 'urban surface model requires setting of '// &
2022	'bc_pt_b = "dirichlet" and '// &
2023	'bc_q_b = "dirichlet"'
2024	CALL message( 'check_parameters', 'PA0590', 1, 2, 0, 6, 0 )
2025	ENDIF
2026
2027	IF ( .NOT. constant_flux_layer ) THEN
2028	message_string = 'urban surface model requires '// &
2029	'constant_flux_layer = .T.'
2030	CALL message( 'check_parameters', 'PA0591', 1, 2, 0, 6, 0 )
2031	ENDIF
2032	!
2033	!-- Surface forcing has to be disabled for LSF in case of enabled
2034	!-- urban surface module
2035	IF ( large_scale_forcing ) THEN
2036	lsf_surf = .FALSE.
2037	ENDIF
2038	!
2039	!-- Topography
2040	IF ( topography == 'flat' ) THEN
2041	message_string = 'topography /= "flat" is required '// &
2042	'when using the urban surface model'
2043	CALL message( 'check_parameters', 'PA0592', 1, 2, 0, 6, 0 )
2044	ENDIF
2045
2046
2047	END SUBROUTINE usm_check_parameters
2048
2049
2050	!------------------------------------------------------------------------------!
2051	!
2052	! Description:
2053	! ------------
2054	!> Output of the 3D-arrays in netCDF and/or AVS format
2055	!> for variables of urban_surface model.
2056	!> It resorts the urban surface module output quantities from surf style
2057	!> indexing into temporary 3D array with indices (i,j,k).
2058	!> It is called from subroutine data_output_3d.
2059	!------------------------------------------------------------------------------!
2060	SUBROUTINE usm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
2061
2062	IMPLICIT NONE
2063
2064	INTEGER(iwp), INTENT(IN) :: av !<
2065	CHARACTER (len=*), INTENT(IN) :: variable !<
2066	INTEGER(iwp), INTENT(IN) :: nzb_do !< lower limit of the data output (usually 0)
2067	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
2068	LOGICAL, INTENT(OUT) :: found !<
2069	REAL(sp), DIMENSION(nxlg:nxrg,nysg:nyng,nzb_do:nzt_do) :: local_pf !< sp - it has to correspond to module data_output_3d
2070	REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: temp_pf !< temp array for urban surface output procedure
2071
2072	CHARACTER (len=varnamelength) :: var, surfid
2073	INTEGER(iwp), PARAMETER :: nd = 5
2074	CHARACTER(len=6), DIMENSION(0:nd-1), PARAMETER :: dirname = (/ '_roof ', '_south', '_north', '_west ', '_east ' /)
2075	INTEGER(iwp), DIMENSION(0:nd-1), PARAMETER :: dirint = (/ iroof, isouth, inorth, iwest, ieast /)
2076	INTEGER(iwp), DIMENSION(0:nd-1) :: dirstart
2077	INTEGER(iwp), DIMENSION(0:nd-1) :: dirend
2078	INTEGER(iwp) :: ids,isurf,isvf,isurfs,isurflt
2079	INTEGER(iwp) :: is,js,ks,i,j,k,iwl,istat
2080
2081	dirstart = (/ startland, startwall, startwall, startwall, startwall /)
2082	dirend = (/ endland, endwall, endwall, endwall, endwall /)
2083
2084	found = .TRUE.
2085	temp_pf = -1._wp
2086
2087	ids = -1
2088	var = TRIM(variable)
2089	DO i = 0, nd-1
2090	k = len(TRIM(var))
2091	j = len(TRIM(dirname(i)))
2092	IF ( var(k-j+1:k) == dirname(i) ) THEN
2093	ids = i
2094	var = var(:k-j)
2095	EXIT
2096	ENDIF
2097	ENDDO
2098	IF ( ids == -1 ) THEN
2099	var = TRIM(variable)
2100	ENDIF
2101	IF ( var(1:11) == 'usm_t_wall_' .AND. len(TRIM(var)) >= 12 ) THEN
2102	!-- wall layers
2103	READ(var(12:12), '(I1)', iostat=istat ) iwl
2104	IF ( istat == 0 .AND. iwl >= nzb_wall .AND. iwl <= nzt_wall ) THEN
2105	var = var(1:10)
2106	ENDIF
2107	ENDIF
2108	IF ( (var(1:8) == 'usm_svf_' .OR. var(1:8) == 'usm_dif_') .AND. len(TRIM(var)) >= 13 ) THEN
2109	!-- svf values to particular surface
2110	surfid = var(9:)
2111	i = index(surfid,'_')
2112	j = index(surfid(i+1:),'_')
2113	READ(surfid(1:i-1),*, iostat=istat ) is
2114	IF ( istat == 0 ) THEN
2115	READ(surfid(i+1:i+j-1),*, iostat=istat ) js
2116	ENDIF
2117	IF ( istat == 0 ) THEN
2118	READ(surfid(i+j+1:),*, iostat=istat ) ks
2119	ENDIF
2120	IF ( istat == 0 ) THEN
2121	var = var(1:7)
2122	ENDIF
2123	ENDIF
2124
2125	SELECT CASE ( TRIM(var) )
2126
2127	CASE ( 'usm_surfz' )
2128	!-- array of lw radiation falling to local surface after i-th reflection
2129	DO isurf = dirstart(ids), dirend(ids)
2130	IF ( surfl(id,isurf) == ids ) THEN
2131	IF ( surfl(id,isurf) == iroof ) THEN
2132	temp_pf(0,surfl(iy,isurf),surfl(ix,isurf)) = &
2133	max(temp_pf(0,surfl(iy,isurf),surfl(ix,isurf)), &
2134	REAL(surfl(iz,isurf),wp))
2135	ELSE
2136	temp_pf(0,surfl(iy,isurf),surfl(ix,isurf)) = &
2137	max(temp_pf(0,surfl(iy,isurf),surfl(ix,isurf)), &
2138	REAL(surfl(iz,isurf),wp)+1.0_wp)
2139	ENDIF
2140	ENDIF
2141	ENDDO
2142
2143	CASE ( 'usm_surfcat' )
2144	!-- surface category
2145	DO isurf = dirstart(ids), dirend(ids)
2146	IF ( surfl(id,isurf) == ids ) THEN
2147	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surface_types(isurf)
2148	ENDIF
2149	ENDDO
2150
2151	CASE ( 'usm_surfalb' )
2152	!-- surface albedo
2153	DO isurf = dirstart(ids), dirend(ids)
2154	IF ( surfl(id,isurf) == ids ) THEN
2155	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = albedo_surf(isurf)
2156	ENDIF
2157	ENDDO
2158
2159	CASE ( 'usm_surfemis' )
2160	!-- surface albedo
2161	DO isurf = dirstart(ids), dirend(ids)
2162	IF ( surfl(id,isurf) == ids ) THEN
2163	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = emiss_surf(isurf)
2164	ENDIF
2165	ENDDO
2166
2167	CASE ( 'usm_svf', 'usm_dif' )
2168	!-- shape view factors or iradiance factors to selected surface
2169	IF ( TRIM(var)=='usm_svf' ) THEN
2170	k = 1
2171	ELSE
2172	k = 2
2173	ENDIF
2174	DO isvf = 1, nsvfl
2175	isurflt = svfsurf(1, isvf)
2176	isurfs = svfsurf(2, isvf)
2177
2178	IF ( surf(ix,isurfs) == is .AND. surf(iy,isurfs) == js .AND. &
2179	surf(iz,isurfs) == ks .AND. surf(id,isurfs) == ids ) THEN
2180	!-- correct source surface
2181	temp_pf(surfl(iz,isurflt),surfl(iy,isurflt),surfl(ix,isurflt)) = svf(k,isvf)
2182	ENDIF
2183	ENDDO
2184
2185	CASE ( 'usm_rad_net' )
2186	!-- array of complete radiation balance
2187	DO isurf = dirstart(ids), dirend(ids)
2188	IF ( surfl(id,isurf) == ids ) THEN
2189	IF ( av == 0 ) THEN
2190	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = rad_net_l(isurf)
2191	ELSE
2192	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = rad_net_av(isurf)
2193	ENDIF
2194	ENDIF
2195	ENDDO
2196
2197	CASE ( 'usm_rad_insw' )
2198	!-- array of sw radiation falling to surface after i-th reflection
2199	DO isurf = dirstart(ids), dirend(ids)
2200	IF ( surfl(id,isurf) == ids ) THEN
2201	IF ( av == 0 ) THEN
2202	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinsw(isurf)
2203	ELSE
2204	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinsw_av(isurf)
2205	ENDIF
2206	ENDIF
2207	ENDDO
2208
2209	CASE ( 'usm_rad_inlw' )
2210	!-- array of lw radiation falling to surface after i-th reflection
2211	DO isurf = dirstart(ids), dirend(ids)
2212	IF ( surfl(id,isurf) == ids ) THEN
2213	IF ( av == 0 ) THEN
2214	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinlw(isurf)
2215	ELSE
2216	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinlw_av(isurf)
2217	ENDIF
2218	ENDIF
2219	ENDDO
2220
2221	CASE ( 'usm_rad_inswdir' )
2222	!-- array of direct sw radiation falling to surface from sun
2223	DO isurf = dirstart(ids), dirend(ids)
2224	IF ( surfl(id,isurf) == ids ) THEN
2225	IF ( av == 0 ) THEN
2226	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinswdir(isurf)
2227	ELSE
2228	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinswdir_av(isurf)
2229	ENDIF
2230	ENDIF
2231	ENDDO
2232
2233	CASE ( 'usm_rad_inswdif' )
2234	!-- array of difusion sw radiation falling to surface from sky and borders of the domain
2235	DO isurf = dirstart(ids), dirend(ids)
2236	IF ( surfl(id,isurf) == ids ) THEN
2237	IF ( av == 0 ) THEN
2238	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinswdif(isurf)
2239	ELSE
2240	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinswdif_av(isurf)
2241	ENDIF
2242	ENDIF
2243	ENDDO
2244
2245	CASE ( 'usm_rad_inswref' )
2246	!-- array of sw radiation falling to surface from reflections
2247	DO isurf = dirstart(ids), dirend(ids)
2248	IF ( surfl(id,isurf) == ids ) THEN
2249	IF ( av == 0 ) THEN
2250	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = &
2251	surfinsw(isurf) - surfinswdir(isurf) - surfinswdif(isurf)
2252	ELSE
2253	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinswref_av(isurf)
2254	ENDIF
2255	ENDIF
2256	ENDDO
2257
2258	CASE ( 'usm_rad_inlwdif' )
2259	!-- array of sw radiation falling to surface after i-th reflection
2260	DO isurf = dirstart(ids), dirend(ids)
2261	IF ( surfl(id,isurf) == ids ) THEN
2262	IF ( av == 0 ) THEN
2263	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinlwdif(isurf)
2264	ELSE
2265	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinlwdif_av(isurf)
2266	ENDIF
2267	ENDIF
2268	ENDDO
2269
2270	CASE ( 'usm_rad_inlwref' )
2271	!-- array of lw radiation falling to surface from reflections
2272	DO isurf = dirstart(ids), dirend(ids)
2273	IF ( surfl(id,isurf) == ids ) THEN
2274	IF ( av == 0 ) THEN
2275	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinlw(isurf) - surfinlwdif(isurf)
2276	ELSE
2277	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinlwref_av(isurf)
2278	ENDIF
2279	ENDIF
2280	ENDDO
2281
2282	CASE ( 'usm_rad_outsw' )
2283	!-- array of sw radiation emitted from surface after i-th reflection
2284	DO isurf = dirstart(ids), dirend(ids)
2285	IF ( surfl(id,isurf) == ids ) THEN
2286	IF ( av == 0 ) THEN
2287	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfoutsw(isurf)
2288	ELSE
2289	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfoutsw_av(isurf)
2290	ENDIF
2291	ENDIF
2292	ENDDO
2293
2294	CASE ( 'usm_rad_outlw' )
2295	!-- array of lw radiation emitted from surface after i-th reflection
2296	DO isurf = dirstart(ids), dirend(ids)
2297	IF ( surfl(id,isurf) == ids ) THEN
2298	IF ( av == 0 ) THEN
2299	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfoutlw(isurf)
2300	ELSE
2301	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfoutlw_av(isurf)
2302	ENDIF
2303	ENDIF
2304	ENDDO
2305
2306	CASE ( 'usm_rad_ressw' )
2307	!-- average of array of residua of sw radiation absorbed in surface after last reflection
2308	DO isurf = dirstart(ids), dirend(ids)
2309	IF ( surfl(id,isurf) == ids ) THEN
2310	IF ( av == 0 ) THEN
2311	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfins(isurf)
2312	ELSE
2313	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfins_av(isurf)
2314	ENDIF
2315	ENDIF
2316	ENDDO
2317
2318	CASE ( 'usm_rad_reslw' )
2319	!-- average of array of residua of lw radiation absorbed in surface after last reflection
2320	DO isurf = dirstart(ids), dirend(ids)
2321	IF ( surfl(id,isurf) == ids ) THEN
2322	IF ( av == 0 ) THEN
2323	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinl(isurf)
2324	ELSE
2325	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfinl_av(isurf)
2326	ENDIF
2327	ENDIF
2328	ENDDO
2329
2330	CASE ( 'usm_rad_hf' )
2331	!-- array of heat flux from radiation for surfaces after all reflections
2332	DO isurf = dirstart(ids), dirend(ids)
2333	IF ( surfl(id,isurf) == ids ) THEN
2334	IF ( av == 0 ) THEN
2335	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfhf(isurf)
2336	ELSE
2337	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = surfhf_av(isurf)
2338	ENDIF
2339	ENDIF
2340	ENDDO
2341
2342	CASE ( 'usm_wshf' )
2343	!-- array of sensible heat flux from surfaces
2344	!-- horizontal surfaces
2345	DO isurf = dirstart(ids), dirend(ids)
2346	IF ( surfl(id,isurf) == ids ) THEN
2347	IF ( av == 0 ) THEN
2348	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = wshf_eb(isurf)
2349	ELSE
2350	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = wshf_eb_av(isurf)
2351	ENDIF
2352	ENDIF
2353	ENDDO
2354
2355	CASE ( 'usm_wghf' )
2356	!-- array of heat flux from ground (land, wall, roof)
2357	DO isurf = dirstart(ids), dirend(ids)
2358	IF ( surfl(id,isurf) == ids ) THEN
2359	IF ( av == 0 ) THEN
2360	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = wghf_eb(isurf)
2361	ELSE
2362	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = wghf_eb_av(isurf)
2363	ENDIF
2364	ENDIF
2365	ENDDO
2366
2367	CASE ( 'usm_t_surf' )
2368	!-- surface temperature for surfaces
2369	DO isurf = max(startenergy,dirstart(ids)), min(endenergy,dirend(ids))
2370	IF ( surfl(id,isurf) == ids ) THEN
2371	IF ( av == 0 ) THEN
2372	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = t_surf(isurf)
2373	ELSE
2374	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = t_surf_av(isurf)
2375	ENDIF
2376	ENDIF
2377	ENDDO
2378
2379	CASE ( 'usm_t_wall' )
2380	!-- wall temperature for iwl layer of walls and land
2381	DO isurf = dirstart(ids), dirend(ids)
2382	IF ( surfl(id,isurf) == ids ) THEN
2383	IF ( av == 0 ) THEN
2384	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = t_wall(iwl,isurf)
2385	ELSE
2386	temp_pf(surfl(iz,isurf),surfl(iy,isurf),surfl(ix,isurf)) = t_wall_av(iwl,isurf)
2387	ENDIF
2388	ENDIF
2389	ENDDO
2390
2391	CASE ( 'usm_lad' )
2392	!-- leaf area density
2393	DO i = nxl, nxr
2394	DO j = nys, nyn
2395	DO k = nzb_s_inner(j,i), nzut
2396	temp_pf(k,j,i) = lad_s(k-nzb_s_inner(j,i),j,i)
2397	ENDDO
2398	ENDDO
2399	ENDDO
2400
2401	CASE ( 'usm_canopy_hr' )
2402	!-- canopy heating rate
2403	DO i = nxl, nxr
2404	DO j = nys, nyn
2405	DO k = nzb_s_inner(j,i), nzut
2406	temp_pf(k,j,i) = pc_heating_rate(k-nzb_s_inner(j,i),j,i)
2407	ENDDO
2408	ENDDO
2409	ENDDO
2410
2411	CASE DEFAULT
2412	found = .FALSE.
2413
2414	END SELECT
2415
2416	!-- fill out array local_pf which is subsequently treated by data_output_3d
2417	CALL exchange_horiz( temp_pf, nbgp )
2418	DO j = nysg,nyng
2419	DO i = nxlg,nxrg
2420	DO k = nzb_do, nzt_do
2421	local_pf(i,j,k) = temp_pf(k,j,i)
2422	ENDDO
2423	ENDDO
2424	ENDDO
2425
2426	END SUBROUTINE usm_data_output_3d
2427
2428
2429	!------------------------------------------------------------------------------!
2430	!
2431	! Description:
2432	! ------------
2433	!> Soubroutine defines appropriate grid for netcdf variables.
2434	!> It is called out from subroutine netcdf.
2435	!------------------------------------------------------------------------------!
2436	SUBROUTINE usm_define_netcdf_grid( variable, found, grid_x, grid_y, grid_z )
2437
2438	IMPLICIT NONE
2439
2440	CHARACTER (len=*), INTENT(IN) :: variable !<
2441	LOGICAL, INTENT(OUT) :: found !<
2442	CHARACTER (len=*), INTENT(OUT) :: grid_x !<
2443	CHARACTER (len=*), INTENT(OUT) :: grid_y !<
2444	CHARACTER (len=*), INTENT(OUT) :: grid_z !<
2445
2446	CHARACTER (len=varnamelength) :: var
2447
2448	var = TRIM(variable)
2449	IF ( var(1:12) == 'usm_rad_net_' .OR. var(1:13) == 'usm_rad_insw_' .OR. &
2450	var(1:13) == 'usm_rad_inlw_' .OR. var(1:16) == 'usm_rad_inswdir_' .OR. &
2451	var(1:16) == 'usm_rad_inswdif_' .OR. var(1:16) == 'usm_rad_inswref_' .OR. &
2452	var(1:16) == 'usm_rad_inlwdif_' .OR. var(1:16) == 'usm_rad_inlwref_' .OR. &
2453	var(1:14) == 'usm_rad_outsw_' .OR. var(1:14) == 'usm_rad_outlw_' .OR. &
2454	var(1:14) == 'usm_rad_ressw_' .OR. var(1:14) == 'usm_rad_reslw_' .OR. &
2455	var(1:11) == 'usm_rad_hf_' .OR. &
2456	var(1:9) == 'usm_wshf_' .OR. var(1:9) == 'usm_wghf_' .OR. &
2457	var(1:10) == 'usm_t_surf' .OR. var(1:10) == 'usm_t_wall' .OR. &
2458	var(1:9) == 'usm_surfz' .OR. var(1:7) == 'usm_svf' .OR. &
2459	var(1:7) == 'usm_dif' .OR. var(1:11) == 'usm_surfcat' .OR. &
2460	var(1:11) == 'usm_surfalb' .OR. var(1:12) == 'usm_surfemis' .OR. &
2461	var(1:7) == 'usm_lad' .OR. var(1:13) == 'usm_canopy_hr' ) THEN
2462
2463	found = .TRUE.
2464	grid_x = 'x'
2465	grid_y = 'y'
2466	grid_z = 'zu'
2467	ELSE
2468	found = .FALSE.
2469	grid_x = 'none'
2470	grid_y = 'none'
2471	grid_z = 'none'
2472	ENDIF
2473
2474	END SUBROUTINE usm_define_netcdf_grid
2475
2476
2477	!------------------------------------------------------------------------------!
2478	!> Finds first model boundary crossed by a ray
2479	!------------------------------------------------------------------------------!
2480	PURE SUBROUTINE usm_find_boundary_face(origin, uvect, bdycross)
2481	IMPLICIT NONE
2482	REAL(wp), DIMENSION(3), INTENT(in) :: origin !< ray origin
2483	REAL(wp), DIMENSION(3), INTENT(in) :: uvect !< ray unit vector
2484	INTEGER(iwp), DIMENSION(4), INTENT(out) :: bdycross !< found boundary crossing (d, z, y, x)
2485	REAL(wp), DIMENSION(3) :: crossdist !< crossing distance
2486	INTEGER(iwp), DIMENSION(3) :: bdyd !< boundary direction
2487	REAL(wp) :: bdydim !<
2488	REAL(wp) :: dist !<
2489	INTEGER(iwp) :: seldim !< found fist crossing index
2490	INTEGER(iwp) :: d !<
2491
2492	bdydim = nzut + .5_wp !< top boundary
2493	bdyd(1) = isky
2494	crossdist(1) = (bdydim - origin(1)) / uvect(1)
2495
2496	IF ( uvect(2) >= 0._wp ) THEN
2497	bdydim = ny + .5_wp !< north global boundary
2498	bdyd(2) = inorthb
2499	ELSE
2500	bdydim = -.5_wp !< south global boundary
2501	bdyd(2) = isouthb
2502	ENDIF
2503	crossdist(2) = (bdydim - origin(2)) / uvect(2)
2504
2505	IF ( uvect(3) >= 0._wp ) THEN
2506	bdydim = nx + .5_wp !< east global boundary
2507	bdyd(3) = ieastb
2508	ELSE
2509	bdydim = -.5_wp !< west global boundary
2510	bdyd(3) = iwestb
2511	ENDIF
2512	crossdist(3) = (bdydim - origin(3)) / uvect(3)
2513
2514	seldim = minloc(crossdist, 1)
2515	dist = crossdist(seldim)
2516	d = bdyd(seldim)
2517
2518	bdycross(1) = d
2519	bdycross(2:4) = NINT( origin(:) + uvect(:)*dist &
2520	+ .5_wp * (/ kdir(d), jdir(d), idir(d) /) )
2521	END SUBROUTINE
2522
2523
2524	!------------------------------------------------------------------------------!
2525	!> Determines whether two faces are oriented towards each other
2526	!------------------------------------------------------------------------------!
2527	PURE LOGICAL FUNCTION usm_facing(x, y, z, d, x2, y2, z2, d2)
2528	IMPLICIT NONE
2529	INTEGER(iwp), INTENT(in) :: x, y, z, d, x2, y2, z2, d2
2530
2531	usm_facing = .FALSE.
2532	IF ( d==iroof .AND. d2==iroof ) RETURN
2533	IF ( d==isky .AND. d2==isky ) RETURN
2534	IF ( (d==isouth .OR. d==inorthb) .AND. (d2==isouth.OR.d2==inorthb) ) RETURN
2535	IF ( (d==inorth .OR. d==isouthb) .AND. (d2==inorth.OR.d2==isouthb) ) RETURN
2536	IF ( (d==iwest .OR. d==ieastb) .AND. (d2==iwest.OR.d2==ieastb) ) RETURN
2537	IF ( (d==ieast .OR. d==iwestb) .AND. (d2==ieast.OR.d2==iwestb) ) RETURN
2538
2539	SELECT CASE (d)
2540	CASE (iroof) !< ground, roof
2541	IF ( z2 < z ) RETURN
2542	CASE (isky) !< sky
2543	IF ( z2 > z ) RETURN
2544	CASE (isouth, inorthb) !< south facing
2545	IF ( y2 > y ) RETURN
2546	CASE (inorth, isouthb) !< north facing
2547	IF ( y2 < y ) RETURN
2548	CASE (iwest, ieastb) !< west facing
2549	IF ( x2 > x ) RETURN
2550	CASE (ieast, iwestb) !< east facing
2551	IF ( x2 < x ) RETURN
2552	END SELECT
2553
2554	SELECT CASE (d2)
2555	CASE (iroof) !< ground, roof
2556	IF ( z < z2 ) RETURN
2557	CASE (isky) !< sky
2558	IF ( z > z2 ) RETURN
2559	CASE (isouth, inorthb) !< south facing
2560	IF ( y > y2 ) RETURN
2561	CASE (inorth, isouthb) !< north facing
2562	IF ( y < y2 ) RETURN
2563	CASE (iwest, ieastb) !< west facing
2564	IF ( x > x2 ) RETURN
2565	CASE (ieast, iwestb) !< east facing
2566	IF ( x < x2 ) RETURN
2567	CASE (-1)
2568	CONTINUE
2569	END SELECT
2570
2571	usm_facing = .TRUE.
2572
2573	END FUNCTION usm_facing
2574
2575
2576	!------------------------------------------------------------------------------!
2577	! Description:
2578	! ------------
2579	!> Initialization of the wall surface model
2580	!------------------------------------------------------------------------------!
2581	SUBROUTINE usm_init_material_model
2582
2583	IMPLICIT NONE
2584
2585	INTEGER(iwp) :: k, l !< running indices
2586
2587	CALL location_message( ' initialization of wall surface model', .TRUE. )
2588
2589	!-- Calculate wall grid spacings.
2590	!-- Temperature is defined at the center of the wall layers,
2591	!-- whereas gradients/fluxes are defined at the edges (_stag)
2592	DO l = nzb_wall, nzt_wall
2593	zwn(l) = zwn_default(l)
2594	ENDDO
2595
2596	!-- apply for all particular wall grids
2597	DO l = startenergy, endenergy
2598	zw(:,l) = zwn(:) * thickness_wall(l)
2599	dz_wall(nzb_wall,l) = zw(nzb_wall,l)
2600	DO k = nzb_wall+1, nzt_wall
2601	dz_wall(k,l) = zw(k,l) - zw(k-1,l)
2602	ENDDO
2603
2604	dz_wall(nzt_wall+1,l) = dz_wall(nzt_wall,l)
2605
2606	DO k = nzb_wall, nzt_wall-1
2607	dz_wall_stag(k,l) = 0.5 * (dz_wall(k+1,l) + dz_wall(k,l))
2608	ENDDO
2609	dz_wall_stag(nzt_wall,l) = dz_wall(nzt_wall,l)
2610	ENDDO
2611
2612	ddz_wall = 1.0_wp / dz_wall
2613	ddz_wall_stag = 1.0_wp / dz_wall_stag
2614
2615	CALL location_message( ' wall structures filed out', .TRUE. )
2616
2617	CALL location_message( ' initialization of wall surface model finished', .TRUE. )
2618
2619	END SUBROUTINE usm_init_material_model
2620
2621
2622	!------------------------------------------------------------------------------!
2623	! Description:
2624	! ------------
2625	!> Initialization of the urban surface model
2626	!------------------------------------------------------------------------------!
2627	SUBROUTINE usm_init_urban_surface
2628
2629	IMPLICIT NONE
2630
2631	INTEGER(iwp) :: i, j, k, l !< running indices
2632	REAL(wp) :: c, d, tin, exn
2633
2634	CALL cpu_log( log_point_s(78), 'usm_init', 'start' )
2635	!-- surface forcing have to be disabled for LSF
2636	!-- in case of enabled urban surface module
2637	IF ( large_scale_forcing ) THEN
2638	lsf_surf = .FALSE.
2639	ENDIF
2640
2641	!-- init anthropogenic sources of heat
2642	CALL usm_allocate_urban_surface()
2643
2644	!-- read the surface_types array somewhere
2645	CALL usm_read_urban_surface_types()
2646
2647	!-- init material heat model
2648	CALL usm_init_material_model()
2649
2650	IF ( usm_anthropogenic_heat ) THEN
2651	!-- init anthropogenic sources of heat (from transportation for now)
2652	CALL usm_read_anthropogenic_heat()
2653	ENDIF
2654
2655	IF ( read_svf_on_init ) THEN
2656	!-- read svf, csf, svfsurf and csfsurf data from file
2657	CALL location_message( ' Start reading SVF from file', .TRUE. )
2658	CALL usm_read_svf_from_file()
2659	CALL location_message( ' Reading SVF from file has finished', .TRUE. )
2660	ELSE
2661	!-- calculate SFV and CSF
2662	CALL location_message( ' Start calculation of SVF', .TRUE. )
2663	CALL cpu_log( log_point_s(79), 'usm_calc_svf', 'start' )
2664	CALL usm_calc_svf()
2665	CALL cpu_log( log_point_s(79), 'usm_calc_svf', 'stop' )
2666	CALL location_message( ' Calculation of SVF has finished', .TRUE. )
2667	ENDIF
2668
2669	IF ( write_svf_on_init ) THEN
2670	!-- write svf, csf svfsurf and csfsurf data to file
2671	CALL location_message( ' Store SVF and CSF to file', .TRUE. )
2672	CALL usm_write_svf_to_file()
2673	ENDIF
2674
2675	IF ( plant_canopy ) THEN
2676	!-- gridpcbl was only necessary for initialization
2677	DEALLOCATE( gridpcbl )
2678	IF ( .NOT. ALLOCATED(pc_heating_rate) ) THEN
2679	!-- then pc_heating_rate is allocated in init_plant_canopy
2680	!-- in case of cthf /= 0 => we need to allocate it for our use here
2681	ALLOCATE( pc_heating_rate(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
2682	ENDIF
2683	ENDIF
2684
2685	!-- Intitialization of the surface and wall/ground/roof temperature
2686
2687	!-- Initialization for restart runs
2688	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
2689
2690	!-- restore data from restart file
2691	CALL usm_read_restart_data()
2692	ELSE
2693
2694	!-- Calculate initial surface temperature
2695	exn = ( surface_pressure / 1000.0_wp )**0.286_wp
2696
2697	DO l = startenergy, endenergy
2698	k = surfl(iz,l)
2699	j = surfl(iy,l)
2700	i = surfl(ix,l)
2701
2702	!-- Initial surface temperature set from pt of adjacent gridbox
2703	t_surf(l) = pt(k,j,i) * exn
2704	ENDDO
2705
2706	!-- initial values for t_wall
2707	!-- outer value is set to surface temperature
2708	!-- inner value is set to wall_inner_temperature
2709	!-- and profile is logaritmic (linear in nz)
2710	DO l = startenergy, endenergy
2711	IF ( isroof_surf(l) ) THEN
2712	tin = roof_inner_temperature
2713	ELSE IF ( surf(id,l)==iroof ) THEN
2714	tin = soil_inner_temperature
2715	ELSE
2716	tin = wall_inner_temperature
2717	ENDIF
2718	DO k = nzb_wall, nzt_wall+1
2719	c = REAL(k-nzb_wall,wp)/REAL(nzt_wall+1-nzb_wall,wp)
2720	t_wall(k,:) = (1.0_wp-c)t_surf(:) + ctin
2721	ENDDO
2722	ENDDO
2723	ENDIF
2724
2725	!--
2726	!-- Possibly DO user-defined actions (e.g. define heterogeneous wall surface)
2727	CALL user_init_urban_surface
2728
2729	!-- initialize prognostic values for the first timestep
2730	t_surf_p = t_surf
2731	t_wall_p = t_wall
2732
2733	!-- Adjust radiative fluxes for urban surface at model start
2734	CALL usm_radiation
2735
2736	CALL cpu_log( log_point_s(78), 'usm_init', 'stop' )
2737
2738
2739	END SUBROUTINE usm_init_urban_surface
2740
2741
2742	!------------------------------------------------------------------------------!
2743	! Description:
2744	! ------------
2745	!
2746	!> Wall model as part of the urban surface model. The model predicts wall
2747	!> temperature.
2748	!------------------------------------------------------------------------------!
2749	SUBROUTINE usm_material_heat_model
2750
2751
2752	IMPLICIT NONE
2753
2754	INTEGER(iwp) :: i,j,k,l,kw !< running indices
2755
2756	REAL(wp), DIMENSION(nzb_wall:nzt_wall) :: wtend !< tendency
2757
2758
2759	DO l = startenergy, endenergy
2760	!-- calculate frequently used parameters
2761	k = surfl(iz,l)
2762	j = surfl(iy,l)
2763	i = surfl(ix,l)
2764
2765	!
2766	!-- prognostic equation for ground/wall/roof temperature t_wall
2767	wtend(:) = 0.0_wp
2768	wtend(nzb_wall) = (1.0_wp/rho_c_wall(nzb_wall,l)) * &
2769	( lambda_h(nzb_wall,l) * ( t_wall(nzb_wall+1,l) &
2770	- t_wall(nzb_wall,l) ) * ddz_wall(nzb_wall+1,l) &
2771	+ wghf_eb(l) ) * ddz_wall_stag(nzb_wall,l)
2772
2773	DO kw = nzb_wall+1, nzt_wall
2774	wtend(kw) = (1.0_wp/rho_c_wall(kw,l)) &
2775	* ( lambda_h(kw,l) &
2776	* ( t_wall(kw+1,l) - t_wall(kw,l) ) &
2777	* ddz_wall(kw+1,l) &
2778	- lambda_h(kw-1,l) &
2779	* ( t_wall(kw,l) - t_wall(kw-1,l) ) &
2780	* ddz_wall(kw,l) &
2781	) * ddz_wall_stag(kw,l)
2782	ENDDO
2783
2784	t_wall_p(nzb_wall:nzt_wall,l) = t_wall(nzb_wall:nzt_wall,l) &
2785	+ dt_3d * ( tsc(2) &
2786	* wtend(nzb_wall:nzt_wall) + tsc(3) &
2787	* tt_wall_m(nzb_wall:nzt_wall,l) )
2788
2789	!
2790	!-- calculate t_wall tendencies for the next Runge-Kutta step
2791	IF ( timestep_scheme(1:5) == 'runge' ) THEN
2792	IF ( intermediate_timestep_count == 1 ) THEN
2793	DO kw = nzb_wall, nzt_wall
2794	tt_wall_m(kw,l) = wtend(kw)
2795	ENDDO
2796	ELSEIF ( intermediate_timestep_count < &
2797	intermediate_timestep_count_max ) THEN
2798	DO kw = nzb_wall, nzt_wall
2799	tt_wall_m(kw,l) = -9.5625_wp * wtend(kw) + 5.3125_wp &
2800	* tt_wall_m(kw,l)
2801	ENDDO
2802	ENDIF
2803	ENDIF
2804	ENDDO
2805
2806	END SUBROUTINE usm_material_heat_model
2807
2808
2809	!------------------------------------------------------------------------------!
2810	! Description:
2811	! ------------
2812	!> Parin for &usm_par for urban surface model
2813	!------------------------------------------------------------------------------!
2814	SUBROUTINE usm_parin
2815
2816	IMPLICIT NONE
2817
2818	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
2819
2820	NAMELIST /urban_surface_par/ &
2821	land_category, &
2822	mrt_factors, &
2823	nrefsteps, &
2824	pedestrant_category, &
2825	ra_horiz_coef, &
2826	read_svf_on_init, &
2827	roof_category, &
2828	split_diffusion_radiation, &
2829	urban_surface, &
2830	usm_anthropogenic_heat, &
2831	usm_energy_balance_land, &
2832	usm_energy_balance_wall, &
2833	usm_material_model, &
2834	usm_lad_rma, &
2835	wall_category, &
2836	write_svf_on_init
2837
2838	line = ' '
2839
2840	!
2841	!-- Try to find urban surface model package
2842	REWIND ( 11 )
2843	line = ' '
2844	DO WHILE ( INDEX( line, '&urban_surface_par' ) == 0 )
2845	READ ( 11, '(A)', END=10 ) line
2846	ENDDO
2847	BACKSPACE ( 11 )
2848
2849	!
2850	!-- Read user-defined namelist
2851	READ ( 11, urban_surface_par )
2852
2853	!
2854	!-- Set flag that indicates that the land surface model is switched on
2855	urban_surface = .TRUE.
2856
2857
2858	10 CONTINUE
2859
2860	END SUBROUTINE usm_parin
2861
2862
2863	!------------------------------------------------------------------------------!
2864	! Description:
2865	! ------------
2866	!> This subroutine calculates interaction of the solar radiation
2867	!> with urban surface and updates surface, roofs and walls heatfluxes.
2868	!> It also updates rad_sw_out and rad_lw_out.
2869	!------------------------------------------------------------------------------!
2870	SUBROUTINE usm_radiation
2871
2872	IMPLICIT NONE
2873
2874	INTEGER(iwp) :: i, j, k, kk, is, js, d, ku, refstep
2875	INTEGER(iwp) :: nzubl, nzutl, isurf, isurfsrc, isurf1, isvf, icsf, ipcgb
2876	INTEGER(iwp), DIMENSION(4) :: bdycross
2877	REAL(wp), DIMENSION(3,3) :: mrot !< grid rotation matrix (xyz)
2878	REAL(wp), DIMENSION(3,0:9) :: vnorm !< face direction normal vectors (xyz)
2879	REAL(wp), DIMENSION(3) :: sunorig !< grid rotated solar direction unit vector (xyz)
2880	REAL(wp), DIMENSION(3) :: sunorig_grid !< grid squashed solar direction unit vector (zyx)
2881	REAL(wp), DIMENSION(0:9) :: costheta !< direct irradiance factor of solar angle
2882	REAL(wp), DIMENSION(nzub:nzut) :: pchf_prep !< precalculated factor for canopy temp tendency
2883	REAL(wp), PARAMETER :: alpha = 0._wp !< grid rotation (TODO: add to namelist or remove)
2884	REAL(wp) :: rx, ry, rz
2885	REAL(wp) :: pc_box_area, pc_abs_frac, pc_abs_eff
2886	INTEGER(iwp) :: pc_box_dimshift !< transform for best accuracy
2887
2888
2889	IF ( plant_canopy ) THEN
2890	pchf_prep(:) = r_d * (hyp(nzub:nzut) / 100000.0_wp)**0.286_wp &
2891	/ (cp * hyp(nzub:nzut) * dxdydz) !< equals to 1 / (rho_ocean * c_p * Vbox * T)
2892	ENDIF
2893
2894	sun_direction = .TRUE.
2895	CALL calc_zenith !< required also for diffusion radiation
2896
2897	!-- prepare rotated normal vectors and irradiance factor
2898	vnorm(1,:) = idir(:)
2899	vnorm(2,:) = jdir(:)
2900	vnorm(3,:) = kdir(:)
2901	mrot(1, :) = (/ cos(alpha), -sin(alpha), 0._wp /)
2902	mrot(2, :) = (/ sin(alpha), cos(alpha), 0._wp /)
2903	mrot(3, :) = (/ 0._wp, 0._wp, 1._wp /)
2904	sunorig = (/ sun_dir_lon, sun_dir_lat, zenith(0) /)
2905	sunorig = matmul(mrot, sunorig)
2906	DO d = 0, 9
2907	costheta(d) = dot_product(sunorig, vnorm(:,d))
2908	ENDDO
2909
2910	IF ( zenith(0) > 0 ) THEN
2911	!-- now we will "squash" the sunorig vector by grid box size in
2912	!-- each dimension, so that this new direction vector will allow us
2913	!-- to traverse the ray path within grid coordinates directly
2914	sunorig_grid = (/ sunorig(3)/dz, sunorig(2)/dy, sunorig(1)/dx /)
2915	!-- sunorig_grid = sunorig_grid / norm2(sunorig_grid)
2916	sunorig_grid = sunorig_grid / SQRT(SUM(sunorig_grid**2))
2917
2918	IF ( plant_canopy ) THEN
2919	!-- precompute effective box depth with prototype Leaf Area Density
2920	pc_box_dimshift = maxloc(sunorig, 1) - 1
2921	CALL usm_box_absorb(cshift((/dx,dy,dz/), pc_box_dimshift), &
2922	60, prototype_lad, &
2923	cshift(sunorig, pc_box_dimshift), &
2924	pc_box_area, pc_abs_frac)
2925	pc_box_area = pc_box_area * sunorig(pc_box_dimshift+1) / sunorig(3)
2926	pc_abs_eff = log(1._wp - pc_abs_frac) / prototype_lad
2927	ENDIF
2928	ENDIF
2929
2930	!-- split diffusion and direct part of the solar downward radiation
2931	!-- comming from radiation model and store it in 2D arrays
2932	!-- rad_sw_in_diff, rad_sw_in_dir and rad_lw_in_diff
2933	IF ( split_diffusion_radiation ) THEN
2934	CALL usm_calc_diffusion_radiation
2935	ELSE
2936	rad_sw_in_diff = 0.0_wp
2937	rad_sw_in_dir(:,:) = rad_sw_in(0,:,:)
2938	rad_lw_in_diff(:,:) = rad_lw_in(0,:,:)
2939	ENDIF
2940
2941	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2942	!-- First pass: direct + diffuse irradiance
2943	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2944	surfinswdir = 0._wp
2945	surfinswdif = 0._wp
2946	surfinlwdif = 0._wp
2947	surfins = 0._wp
2948	surfinl = 0._wp
2949	surfoutsl = 0._wp
2950	surfoutll = 0._wp
2951
2952	!-- Set up thermal radiation from surfaces
2953	!-- emiss_surf is defined only for surfaces for which energy balance is calculated
2954	surfoutll(startenergy:endenergy) = emiss_surf(startenergy:endenergy) * sigma_sb &
2955	* t_surf(startenergy:endenergy)**4
2956
2957	#if defined( __parallel )
2958	!-- might be optimized and gather only values relevant for current processor
2959	CALL MPI_AllGatherv(surfoutll, nenergy, MPI_REAL, &
2960	surfoutl, nsurfs, surfstart, MPI_REAL, comm2d, ierr)
2961	#else
2962	surfoutl(:) = surfoutll(:)
2963	#endif
2964
2965	isurf1 = -1 !< previous processed surface
2966	DO isvf = 1, nsvfl
2967	isurf = svfsurf(1, isvf)
2968	k = surfl(iz, isurf)
2969	j = surfl(iy, isurf)
2970	i = surfl(ix, isurf)
2971	isurfsrc = svfsurf(2, isvf)
2972	IF ( zenith(0) > 0 .AND. isurf /= isurf1 ) THEN
2973	!-- locate the virtual surface where the direct solar ray crosses domain boundary
2974	!-- (once per target surface)
2975	d = surfl(id, isurf)
2976	rz = REAL(k, wp) - 0.5_wp * kdir(d)
2977	ry = REAL(j, wp) - 0.5_wp * jdir(d)
2978	rx = REAL(i, wp) - 0.5_wp * idir(d)
2979
2980	CALL usm_find_boundary_face( (/ rz, ry, rx /), sunorig_grid, bdycross)
2981
2982	isurf1 = isurf
2983	ENDIF
2984
2985	IF ( surf(id, isurfsrc) >= isky ) THEN
2986	!-- diffuse rad from boundary surfaces. Since it is a simply
2987	!-- calculated value, it is not assigned to surfref(s/l),
2988	!-- instead it is used directly here
2989	!-- we consider the radiation from the radiation model falling on surface
2990	!-- as the radiation falling on the top of urban layer into the place of the source surface
2991	!-- we consider it as a very reasonable simplification which allow as avoid
2992	!-- necessity of other global range arrays and some all to all mpi communication
2993	surfinswdif(isurf) = surfinswdif(isurf) + rad_sw_in_diff(j,i) * svf(1,isvf) * svf(2,isvf)
2994	!< canopy shading is applied only to shortwave
2995	surfinlwdif(isurf) = surfinlwdif(isurf) + rad_lw_in_diff(j,i) * svf(1,isvf)
2996	ELSE
2997	!-- for surface-to-surface factors we calculate thermal radiation in 1st pass
2998	surfinl(isurf) = surfinl(isurf) + svf(1,isvf) * surfoutl(isurfsrc)
2999	ENDIF
3000
3001	IF ( zenith(0) > 0 .AND. all( surf(:, isurfsrc) == bdycross ) ) THEN
3002	!-- found svf between model boundary and the face => face isn't shaded
3003	surfinswdir(isurf) = rad_sw_in_dir(j, i) &
3004	* costheta(surfl(id, isurf)) * svf(2,isvf) / zenith(0)
3005
3006	ENDIF
3007	ENDDO
3008
3009	IF ( plant_canopy ) THEN
3010
3011	pcbinsw(:) = 0._wp
3012	pcbinlw(:) = 0._wp !< will stay always 0 since we don't absorb lw anymore
3013	!
3014	!-- pcsf first pass
3015	isurf1 = -1 !< previous processed pcgb
3016	DO icsf = 1, ncsfl
3017	ipcgb = csfsurf(1, icsf)
3018	i = pcbl(ix,ipcgb)
3019	j = pcbl(iy,ipcgb)
3020	k = pcbl(iz,ipcgb)
3021	isurfsrc = csfsurf(2, icsf)
3022
3023	IF ( zenith(0) > 0 .AND. ipcgb /= isurf1 ) THEN
3024	!-- locate the virtual surface where the direct solar ray crosses domain boundary
3025	!-- (once per target PC gridbox)
3026	rz = REAL(k, wp)
3027	ry = REAL(j, wp)
3028	rx = REAL(i, wp)
3029	CALL usm_find_boundary_face( (/ rz, ry, rx /), &
3030	sunorig_grid, bdycross)
3031
3032	isurf1 = ipcgb
3033	ENDIF
3034
3035	IF ( surf(id, isurfsrc) >= isky ) THEN
3036	!-- Diffuse rad from boundary surfaces. See comments for svf above.
3037	pcbinsw(ipcgb) = pcbinsw(ipcgb) + svf(1,isvf) * svf(2,isvf) * rad_sw_in_diff(j,i)
3038	!-- canopy shading is applied only to shortwave, therefore no absorbtion for lw
3039	!-- pcbinlw(ipcgb) = pcbinlw(ipcgb) + svf(1,isvf) * rad_lw_in_diff(j,i)
3040	!ELSE
3041	!-- Thermal radiation in 1st pass
3042	!-- pcbinlw(ipcgb) = pcbinlw(ipcgb) + svf(1,isvf) * surfoutl(isurfsrc)
3043	ENDIF
3044
3045	IF ( zenith(0) > 0 .AND. all( surf(:, isurfsrc) == bdycross ) ) THEN
3046	!-- found svf between model boundary and the pcgb => pcgb isn't shaded
3047	pc_abs_frac = 1._wp - exp(pc_abs_eff * lad_s(k,j,i))
3048	pcbinsw(ipcgb) = pcbinsw(ipcgb) &
3049	+ rad_sw_in_dir(j, i) * pc_box_area * svf(2,isvf) * pc_abs_frac
3050	ENDIF
3051	ENDDO
3052	ENDIF
3053	surfins(startenergy:endenergy) = surfinswdir(startenergy:endenergy) + surfinswdif(startenergy:endenergy)
3054	surfinl(startenergy:endenergy) = surfinl(startenergy:endenergy) + surfinlwdif(startenergy:endenergy)
3055	surfinsw(:) = surfins(:)
3056	surfinlw(:) = surfinl(:)
3057	surfoutsw(:) = 0.0_wp
3058	surfoutlw(:) = surfoutll(:)
3059	surfhf(startenergy:endenergy) = surfinsw(startenergy:endenergy) + surfinlw(startenergy:endenergy) &
3060	- surfoutsw(startenergy:endenergy) - surfoutlw(startenergy:endenergy)
3061
3062	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3063	!-- Next passes - reflections
3064	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3065	DO refstep = 1, nrefsteps
3066
3067	surfoutsl(startenergy:endenergy) = albedo_surf(startenergy:endenergy) * surfins(startenergy:endenergy)
3068	!-- for non-transparent surfaces, longwave albedo is 1 - emissivity
3069	surfoutll(startenergy:endenergy) = (1._wp - emiss_surf(startenergy:endenergy)) * surfinl(startenergy:endenergy)
3070
3071	#if defined( __parallel )
3072	CALL MPI_AllGatherv(surfoutsl, nsurfl, MPI_REAL, &
3073	surfouts, nsurfs, surfstart, MPI_REAL, comm2d, ierr)
3074	CALL MPI_AllGatherv(surfoutll, nsurfl, MPI_REAL, &
3075	surfoutl, nsurfs, surfstart, MPI_REAL, comm2d, ierr)
3076	#else
3077	surfouts(:) = surfoutsl(:)
3078	surfoutl(:) = surfoutll(:)
3079	#endif
3080
3081	!-- reset for next pass input
3082	surfins(:) = 0._wp
3083	surfinl(:) = 0._wp
3084
3085	!-- reflected radiation
3086	DO isvf = 1, nsvfl
3087	isurf = svfsurf(1, isvf)
3088	isurfsrc = svfsurf(2, isvf)
3089
3090	!-- TODO: to remove if, use start+end for isvf
3091	IF ( surf(id, isurfsrc) < isky ) THEN
3092	surfins(isurf) = surfins(isurf) + svf(1,isvf) * svf(2,isvf) * surfouts(isurfsrc)
3093	surfinl(isurf) = surfinl(isurf) + svf(1,isvf) * surfoutl(isurfsrc)
3094	ENDIF
3095	ENDDO
3096
3097	!-- radiation absorbed by plant canopy
3098	DO icsf = 1, ncsfl
3099	ipcgb = csfsurf(1, icsf)
3100	isurfsrc = csfsurf(2, icsf)
3101
3102	IF ( surf(id, isurfsrc) < isky ) THEN
3103	pcbinsw(ipcgb) = pcbinsw(ipcgb) + csf(1,icsf) * csf(2,icsf) * surfouts(isurfsrc)
3104	!-- pcbinlw(ipcgb) = pcbinlw(ipcgb) + csf(1,icsf) * surfoutl(isurfsrc)
3105	ENDIF
3106	ENDDO
3107
3108	surfinsw(:) = surfinsw(:) + surfins(:)
3109	surfinlw(:) = surfinlw(:) + surfinl(:)
3110	surfoutsw(startenergy:endenergy) = surfoutsw(startenergy:endenergy) + surfoutsl(startenergy:endenergy)
3111	surfoutlw(startenergy:endenergy) = surfoutlw(startenergy:endenergy) + surfoutll(startenergy:endenergy)
3112	surfhf(startenergy:endenergy) = surfinsw(startenergy:endenergy) + surfinlw(startenergy:endenergy) &
3113	- surfoutsw(startenergy:endenergy) - surfoutlw(startenergy:endenergy)
3114
3115	ENDDO
3116
3117	!-- push heat flux absorbed by plant canopy to respective 3D arrays
3118	IF ( plant_canopy ) THEN
3119	pc_heating_rate(:,:,:) = 0._wp
3120	DO ipcgb = 1, npcbl
3121	j = pcbl(iy, ipcgb)
3122	i = pcbl(ix, ipcgb)
3123	k = pcbl(iz, ipcgb)
3124	kk = k - nzb_s_inner(j,i) !- lad arrays are defined flat
3125	pc_heating_rate(kk, j, i) = (pcbinsw(ipcgb) + pcbinlw(ipcgb)) &
3126	* pchf_prep(k) * pt(k, j, i) !-- = dT/dt
3127	ENDDO
3128	ENDIF
3129
3130	!-- return surface radiation to horizontal surfaces
3131	!-- to rad_sw_in, rad_lw_in and rad_net for outputs
3132	!!!!!!!!!!
3133	!-- we need the original radiation on urban top layer
3134	!-- for calculation of MRT so we can't do adjustment here for now
3135	!!!!!!!!!!
3136	!!!DO isurf = 1, nsurfl
3137	!!! i = surfl(ix,isurf)
3138	!!! j = surfl(iy,isurf)
3139	!!! k = surfl(iz,isurf)
3140	!!! d = surfl(id,isurf)
3141	!!! IF ( d==iroof ) THEN
3142	!!! rad_sw_in(:,j,i) = surfinsw(isurf)
3143	!!! rad_lw_in(:,j,i) = surfinlw(isurf)
3144	!!! rad_net(j,i) = rad_sw_in(k,j,i) - rad_sw_out(k,j,i) + rad_lw_in(k,j,i) - rad_lw_out(k,j,i)
3145	!!! ENDIF
3146	!!!ENDDO
3147
3148	END SUBROUTINE usm_radiation
3149
3150
3151	!------------------------------------------------------------------------------!
3152	! Description:
3153	! ------------
3154	!> Raytracing for detecting obstacles and calculating compound canopy sink
3155	!> factors. (A simple obstacle detection would only need to process faces in
3156	!> 3 dimensions without any ordering.)
3157	!> Assumtions:
3158	!> -----------
3159	!> 1. The ray always originates from a face midpoint (only one coordinate equals
3160	!> *.5, i.e. wall) and doesn't travel parallel to the surface (that would mean
3161	!> shape factor=0). Therefore, the ray may never travel exactly along a face
3162	!> or an edge.
3163	!> 2. From grid bottom to urban surface top the grid has to be equidistant
3164	!> within each of the dimensions, including vertical (but the resolution
3165	!> doesn't need to be the same in all three dimensions).
3166	!------------------------------------------------------------------------------!
3167	SUBROUTINE usm_raytrace(src, targ, isrc, rirrf, atarg, create_csf, visible, transparency, win_lad)
3168	IMPLICIT NONE
3169
3170	REAL(wp), DIMENSION(3), INTENT(in) :: src, targ !< real coordinates z,y,x
3171	INTEGER(iwp), INTENT(in) :: isrc !< index of source face for csf
3172	REAL(wp), INTENT(in) :: rirrf !< irradiance factor for csf
3173	REAL(wp), INTENT(in) :: atarg !< target surface area for csf
3174	LOGICAL, INTENT(in) :: create_csf !< whether to generate new CSFs during raytracing
3175	LOGICAL, INTENT(out) :: visible
3176	REAL(wp), INTENT(out) :: transparency !< along whole path
3177	INTEGER(iwp), INTENT(in) :: win_lad
3178	INTEGER(iwp) :: i, j, k, d
3179	INTEGER(iwp) :: seldim !< dimension to be incremented
3180	INTEGER(iwp) :: ncsb !< no of written plant canopy sinkboxes
3181	INTEGER(iwp) :: maxboxes !< max no of gridboxes visited
3182	REAL(wp) :: distance !< euclidean along path
3183	REAL(wp) :: crlen !< length of gridbox crossing
3184	REAL(wp) :: lastdist !< beginning of current crossing
3185	REAL(wp) :: nextdist !< end of current crossing
3186	REAL(wp) :: realdist !< distance in meters per unit distance
3187	REAL(wp) :: crmid !< midpoint of crossing
3188	REAL(wp) :: cursink !< sink factor for current canopy box
3189	REAL(wp), DIMENSION(3) :: delta !< path vector
3190	REAL(wp), DIMENSION(3) :: uvect !< unit vector
3191	REAL(wp), DIMENSION(3) :: dimnextdist !< distance for each dimension increments
3192	INTEGER(iwp), DIMENSION(3) :: box !< gridbox being crossed
3193	INTEGER(iwp), DIMENSION(3) :: dimnext !< next dimension increments along path
3194	INTEGER(iwp), DIMENSION(3) :: dimdelta !< dimension direction = +- 1
3195	INTEGER(iwp) :: px, py !< number of processors in x and y dir before
3196	!< the processor in the question
3197	INTEGER(iwp) :: ip !< number of processor where gridbox reside
3198	INTEGER(iwp) :: ig !< 1D index of gridbox in global 2D array
3199	REAL(wp) :: lad_s_target !< recieved lad_s of particular grid box
3200	REAL(wp), PARAMETER :: grow_factor = 1.5_wp !< factor of expansion of grow arrays
3201
3202	!-- Maximum number of gridboxes visited equals to maximum number of boundaries crossed in each dimension plus one. That's also
3203	!-- the maximum number of plant canopy boxes written. We grow the acsf array accordingly using exponential factor.
3204	maxboxes = SUM(ABS(NINT(targ) - NINT(src))) + 1
3205	IF ( plant_canopy .AND. ncsfl + maxboxes > ncsfla ) THEN
3206	!-- use this code for growing by fixed exponential increments (equivalent to case where ncsfl always increases by 1)
3207	!-- k = CEILING(grow_factor ** real(CEILING(log(real(ncsfl + maxboxes, kind=wp)) &
3208	!-- / log(grow_factor)), kind=wp))
3209	!-- or use this code to simply always keep some extra space after growing
3210	k = CEILING(REAL(ncsfl + maxboxes, kind=wp) * grow_factor)
3211
3212	CALL usm_merge_and_grow_csf(k)
3213	ENDIF
3214
3215	transparency = 1._wp
3216	ncsb = 0
3217
3218	delta(:) = targ(:) - src(:)
3219	distance = SQRT(SUM(delta(:)**2))
3220	IF ( distance == 0._wp ) THEN
3221	visible = .TRUE.
3222	RETURN
3223	ENDIF
3224	uvect(:) = delta(:) / distance
3225	realdist = SQRT(SUM( (uvect(:)(/dz,dy,dx/))*2 ))
3226
3227	lastdist = 0._wp
3228
3229	!-- Since all face coordinates have values *.5 and we'd like to use
3230	!-- integers, all these have .5 added
3231	DO d = 1, 3
3232	IF ( uvect(d) == 0._wp ) THEN
3233	dimnext(d) = 999999999
3234	dimdelta(d) = 999999999
3235	dimnextdist(d) = 1.0E20_wp
3236	ELSE IF ( uvect(d) > 0._wp ) THEN
3237	dimnext(d) = CEILING(src(d) + .5_wp)
3238	dimdelta(d) = 1
3239	dimnextdist(d) = (dimnext(d) - .5_wp - src(d)) / uvect(d)
3240	ELSE
3241	dimnext(d) = FLOOR(src(d) + .5_wp)
3242	dimdelta(d) = -1
3243	dimnextdist(d) = (dimnext(d) - .5_wp - src(d)) / uvect(d)
3244	ENDIF
3245	ENDDO
3246
3247	DO
3248	!-- along what dimension will the next wall crossing be?
3249	seldim = minloc(dimnextdist, 1)
3250	nextdist = dimnextdist(seldim)
3251	IF ( nextdist > distance ) nextdist = distance
3252
3253	crlen = nextdist - lastdist
3254	IF ( crlen > .001_wp ) THEN
3255	crmid = (lastdist + nextdist) * .5_wp
3256	box = NINT(src(:) + uvect(:) * crmid)
3257
3258	!-- calculate index of the grid with global indices (box(2),box(3))
3259	!-- in the array nzterr and plantt and id of the coresponding processor
3260	px = box(3)/nnx
3261	py = box(2)/nny
3262	ip = px*pdims(2)+py
3263	ig = ipnnxnny + (box(3)-pxnnx)nny + box(2)-py*nny
3264	IF ( box(1) <= nzterr(ig) ) THEN
3265	visible = .FALSE.
3266	RETURN
3267	ENDIF
3268
3269	IF ( plant_canopy ) THEN
3270	IF ( box(1) <= plantt(ig) ) THEN
3271	ncsb = ncsb + 1
3272	boxes(:,ncsb) = box
3273	crlens(ncsb) = crlen
3274	#if defined( __parallel )
3275	lad_ip(ncsb) = ip
3276	lad_disp(ncsb) = (box(3)-pxnnx)(nnynzu) + (box(2)-pynny)*nzu + box(1)-nzub
3277	#endif
3278	ENDIF
3279	ENDIF
3280	ENDIF
3281
3282	IF ( nextdist >= distance ) EXIT
3283	lastdist = nextdist
3284	dimnext(seldim) = dimnext(seldim) + dimdelta(seldim)
3285	dimnextdist(seldim) = (dimnext(seldim) - .5_wp - src(seldim)) / uvect(seldim)
3286	ENDDO
3287
3288	IF ( plant_canopy ) THEN
3289	#if defined( __parallel )
3290	IF ( usm_lad_rma ) THEN
3291	!-- send requests for lad_s to appropriate processor
3292	CALL cpu_log( log_point_s(77), 'usm_init_rma', 'start' )
3293	DO i = 1, ncsb
3294	CALL MPI_Get(lad_s_ray(i), 1, MPI_REAL, lad_ip(i), lad_disp(i), &
3295	1, MPI_REAL, win_lad, ierr)
3296	IF ( ierr /= 0 ) THEN
3297	WRITE(message_string, *) 'MPI error ', ierr, ' at MPI_Get'
3298	CALL message( 'usm_raytrace', 'PA0519', 1, 2, 0, 6, 0 )
3299	ENDIF
3300	ENDDO
3301
3302	!-- wait for all pending local requests complete
3303	CALL MPI_Win_flush_local_all(win_lad, ierr)
3304	IF ( ierr /= 0 ) THEN
3305	WRITE(message_string, *) 'MPI error ', ierr, ' at MPI_Win_flush_local_all'
3306	CALL message( 'usm_raytrace', 'PA0519', 1, 2, 0, 6, 0 )
3307	ENDIF
3308	CALL cpu_log( log_point_s(77), 'usm_init_rma', 'stop' )
3309
3310	ENDIF
3311	#endif
3312
3313	!-- calculate csf and transparency
3314	DO i = 1, ncsb
3315	#if defined( __parallel )
3316	IF ( usm_lad_rma ) THEN
3317	lad_s_target = lad_s_ray(i)
3318	ELSE
3319	lad_s_target = usm_lad_g(lad_ip(i)nnxnny*nzu + lad_disp(i))
3320	ENDIF
3321	#else
3322	lad_s_target = usm_lad(boxes(1,i),boxes(2,i),boxes(3,i))
3323	#endif
3324	cursink = 1._wp - exp(-ext_coef * lad_s_target * crlens(i)*realdist)
3325
3326	IF ( create_csf ) THEN
3327	!-- write svf values into the array
3328	ncsfl = ncsfl + 1
3329	acsf(ncsfl)%ip = lad_ip(i)
3330	acsf(ncsfl)%itx = boxes(3,i)
3331	acsf(ncsfl)%ity = boxes(2,i)
3332	acsf(ncsfl)%itz = boxes(1,i)
3333	acsf(ncsfl)%isurfs = isrc
3334	acsf(ncsfl)%rsvf = REAL(cursinkrirrfatarg, wp) !-- we postpone multiplication by transparency
3335	acsf(ncsfl)%rtransp = REAL(transparency, wp)
3336	ENDIF !< create_csf
3337
3338	transparency = transparency * (1._wp - cursink)
3339
3340	ENDDO
3341	ENDIF
3342
3343	visible = .TRUE.
3344
3345	END SUBROUTINE usm_raytrace
3346
3347
3348	!------------------------------------------------------------------------------!
3349	! Description:
3350	! ------------
3351	!
3352	!> This subroutine is part of the urban surface model.
3353	!> It reads daily heat produced by anthropogenic sources
3354	!> and the diurnal cycle of the heat.
3355	!------------------------------------------------------------------------------!
3356	SUBROUTINE usm_read_anthropogenic_heat
3357
3358	INTEGER(iwp) :: i,j,ii
3359	REAL(wp) :: heat
3360
3361	!-- allocation of array of sources of anthropogenic heat and their diural profile
3362	ALLOCATE( aheat(nys:nyn,nxl:nxr) )
3363	ALLOCATE( aheatprof(0:24) )
3364
3365	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3366	!-- read daily amount of heat and its daily cycle
3367	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3368	aheat = 0.0_wp
3369	DO ii = 0, io_blocks-1
3370	IF ( ii == io_group ) THEN
3371
3372	!-- open anthropogenic heat file
3373	OPEN( 151, file='ANTHROPOGENIC_HEAT'//TRIM(coupling_char), action='read', &
3374	status='old', form='formatted', err=11 )
3375	i = 0
3376	j = 0
3377	DO
3378	READ( 151, *, err=12, end=13 ) i, j, heat
3379	IF ( i >= nxl .AND. i <= nxr .AND. j >= nys .AND. j <= nyn ) THEN
3380	!-- write heat into the array
3381	aheat(j,i) = heat
3382	ENDIF
3383	CYCLE
3384	12 WRITE(message_string,'(a,2i4)') 'error in file ANTHROPOGENIC_HEAT'//TRIM(coupling_char)//' after line ',i,j
3385	CALL message( 'usm_read_anthropogenic_heat', 'PA0515', 0, 1, 0, 6, 0 )
3386	ENDDO
3387	13 CLOSE(151)
3388	CYCLE
3389	11 message_string = 'file ANTHROPOGENIC_HEAT'//TRIM(coupling_char)//' does not exist'
3390	CALL message( 'usm_read_anthropogenic_heat', 'PA0516', 1, 2, 0, 6, 0 )
3391	ENDIF
3392
3393	#if defined( __parallel ) && ! defined ( __check )
3394	CALL MPI_BARRIER( comm2d, ierr )
3395	#endif
3396	ENDDO
3397
3398	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3399	!-- read diurnal profiles of heat sources
3400	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3401	aheatprof = 0.0_wp
3402	DO ii = 0, io_blocks-1
3403	IF ( ii == io_group ) THEN
3404
3405	!-- open anthropogenic heat profile file
3406	OPEN( 151, file='ANTHROPOGENIC_HEAT_PROFILE'//TRIM(coupling_char), action='read', &
3407	status='old', form='formatted', err=21 )
3408	i = 0
3409	DO
3410	READ( 151, *, err=22, end=23 ) i, heat
3411	IF ( i >= 0 .AND. i <= 24 ) THEN
3412	!-- write heat into the array
3413	aheatprof(i) = heat
3414	ENDIF
3415	CYCLE
3416	22 WRITE(message_string,'(a,i4)') 'error in file ANTHROPOGENIC_HEAT_PROFILE'// &
3417	TRIM(coupling_char)//' after line ',i
3418	CALL message( 'usm_read_anthropogenic_heat', 'PA0517', 0, 1, 0, 6, 0 )
3419	ENDDO
3420	aheatprof(24) = aheatprof(0)
3421	23 CLOSE(151)
3422	CYCLE
3423	21 message_string = 'file ANTHROPOGENIC_HEAT_PROFILE'//TRIM(coupling_char)//' does not exist'
3424	CALL message( 'usm_read_anthropogenic_heat', 'PA0518', 1, 2, 0, 6, 0 )
3425	ENDIF
3426
3427	#if defined( __parallel ) && ! defined ( __check )
3428	CALL MPI_BARRIER( comm2d, ierr )
3429	#endif
3430	ENDDO
3431
3432	END SUBROUTINE usm_read_anthropogenic_heat
3433
3434
3435	!------------------------------------------------------------------------------!
3436	!
3437	! Description:
3438	! ------------
3439	!> Soubroutine reads t_surf and t_wall data from restart files
3440	!kanani: Renamed this routine according to corresponging routines in PALM
3441	!kanani: Modified the routine to match read_var_list, from where usm_read_restart_data
3442	! shall be called in the future. This part has not been tested yet. (see virtual_flight_mod)
3443	! Also, I had some trouble with the allocation of t_surf, since this is a pointer.
3444	! So, I added some directives here.
3445	!------------------------------------------------------------------------------!
3446	SUBROUTINE usm_read_restart_data
3447
3448
3449	IMPLICIT NONE
3450
3451	CHARACTER (LEN=30) :: variable_chr !< dummy variable to read string
3452
3453	INTEGER(iwp) :: i !< running index
3454
3455
3456	DO i = 0, io_blocks-1
3457	IF ( i == io_group ) THEN
3458	READ ( 13 ) variable_chr
3459	DO WHILE ( TRIM( variable_chr ) /= '* end usm *' )
3460
3461	SELECT CASE ( TRIM( variable_chr ) )
3462
3463	CASE ( 't_surf' )
3464	#if defined( __nopointer )
3465	IF ( .NOT. ALLOCATED( t_surf ) ) &
3466	ALLOCATE( t_surf(startenergy:endenergy) )
3467	READ ( 13 ) t_surf
3468	#else
3469	IF ( .NOT. ALLOCATED( t_surf_1 ) ) &
3470	ALLOCATE( t_surf_1(startenergy:endenergy) )
3471	READ ( 13 ) t_surf_1
3472	#endif
3473
3474	CASE ( 't_wall' )
3475	#if defined( __nopointer )
3476	IF ( .NOT. ALLOCATED( t_wall ) ) &
3477	ALLOCATE( t_wall(nzb_wall:nzt_wall+1,startenergy:endenergy) )
3478	READ ( 13 ) t_wall
3479	#else
3480	IF ( .NOT. ALLOCATED( t_wall_1 ) ) &
3481	ALLOCATE( t_wall_1(nzb_wall:nzt_wall+1,startenergy:endenergy) )
3482	READ ( 13 ) t_wall_1
3483	#endif
3484
3485	CASE DEFAULT
3486	WRITE ( message_string, * ) 'unknown variable named "', &
3487	TRIM( variable_chr ), '" found in', &
3488	'&data from prior run on PE ', myid
3489	CALL message( 'user_read_restart_data', 'UI0012', 1, 2, 0, 6, 0 )
3490
3491	END SELECT
3492
3493	READ ( 13 ) variable_chr
3494
3495	ENDDO
3496	ENDIF
3497	#if defined( __parallel )
3498	CALL MPI_BARRIER( comm2d, ierr )
3499	#endif
3500	ENDDO
3501
3502	END SUBROUTINE usm_read_restart_data
3503
3504
3505	!------------------------------------------------------------------------------!
3506	!
3507	! Description:
3508	! ------------
3509	!> Soubroutine reads svf and svfsurf data from saved file
3510	!------------------------------------------------------------------------------!
3511	SUBROUTINE usm_read_svf_from_file
3512
3513	IMPLICIT NONE
3514	INTEGER(iwp) :: fsvf = 89
3515	INTEGER(iwp) :: i
3516	CHARACTER(usm_version_len) :: usm_version_field
3517	CHARACTER(svf_code_len) :: svf_code_field
3518
3519	DO i = 0, io_blocks-1
3520	IF ( i == io_group ) THEN
3521	OPEN ( fsvf, file=TRIM(svf_file_name)//TRIM(coupling_char)//myid_char, &
3522	form='unformatted', status='old' )
3523
3524	!-- read and check version
3525	READ ( fsvf ) usm_version_field
3526	IF ( TRIM(usm_version_field) /= TRIM(usm_version) ) THEN
3527	WRITE( message_string, * ) 'Version of binary SVF file "', &
3528	TRIM(usm_version_field), '" does not match ', &
3529	'the version of model "', TRIM(usm_version), '"'
3530	CALL message( 'usm_read_svf_from_file', 'UI0012', 1, 2, 0, 6, 0 )
3531	ENDIF
3532
3533	!-- read nsvfl, ncsfl
3534	READ ( fsvf ) nsvfl, ncsfl
3535	IF ( nsvfl <= 0 .OR. ncsfl < 0 ) THEN
3536	WRITE( message_string, * ) 'Wrong number of SVF or CSF'
3537	CALL message( 'usm_read_svf_from_file', 'UI0012', 1, 2, 0, 6, 0 )
3538	ELSE
3539	WRITE(message_string,*) ' Number of SVF and CSF to read', nsvfl, ncsfl
3540	CALL location_message( message_string, .TRUE. )
3541	ENDIF
3542
3543	ALLOCATE(svf(ndsvf,nsvfl))
3544	ALLOCATE(svfsurf(idsvf,nsvfl))
3545	READ(fsvf) svf
3546	READ(fsvf) svfsurf
3547	IF ( plant_canopy ) THEN
3548	ALLOCATE(csf(ndcsf,ncsfl))
3549	ALLOCATE(csfsurf(idcsf,ncsfl))
3550	READ(fsvf) csf
3551	READ(fsvf) csfsurf
3552	ENDIF
3553	READ ( fsvf ) svf_code_field
3554
3555	IF ( TRIM(svf_code_field) /= TRIM(svf_code) ) THEN
3556	WRITE( message_string, * ) 'Wrong structure of binary svf file'
3557	CALL message( 'usm_read_svf_from_file', 'UI0012', 1, 2, 0, 6, 0 )
3558	ENDIF
3559
3560	CLOSE (fsvf)
3561
3562	ENDIF
3563	#if defined( __parallel )
3564	CALL MPI_BARRIER( comm2d, ierr )
3565	#endif
3566	ENDDO
3567
3568	END SUBROUTINE usm_read_svf_from_file
3569
3570
3571	!------------------------------------------------------------------------------!
3572	! Description:
3573	! ------------
3574	!
3575	!> This subroutine reads walls, roofs and land categories and it parameters
3576	!> from input files.
3577	!------------------------------------------------------------------------------!
3578	SUBROUTINE usm_read_urban_surface_types
3579
3580	CHARACTER(12) :: wtn
3581	INTEGER(iwp) :: wtc
3582	REAL(wp), DIMENSION(n_surface_params) :: wtp
3583
3584	INTEGER(iwp), DIMENSION(0:17, nysg:nyng, nxlg:nxrg) :: usm_par
3585	REAL(wp), DIMENSION(1:14, nysg:nyng, nxlg:nxrg) :: usm_val
3586	INTEGER(iwp) :: k, l, d, iw, jw, kw, it, ip, ii, ij
3587	INTEGER(iwp) :: i, j
3588	INTEGER(iwp) :: nz, roof, dirwe, dirsn
3589	INTEGER(iwp) :: category
3590	INTEGER(iwp) :: weheight1, wecat1, snheight1, sncat1
3591	INTEGER(iwp) :: weheight2, wecat2, snheight2, sncat2
3592	INTEGER(iwp) :: weheight3, wecat3, snheight3, sncat3
3593	REAL(wp) :: height, albedo, thick
3594	REAL(wp) :: wealbedo1, wethick1, snalbedo1, snthick1
3595	REAL(wp) :: wealbedo2, wethick2, snalbedo2, snthick2
3596	REAL(wp) :: wealbedo3, wethick3, snalbedo3, snthick3
3597
3598	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3599	!-- read categories of walls and their parameters
3600	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3601	DO ii = 0, io_blocks-1
3602	IF ( ii == io_group ) THEN
3603
3604	!-- open urban surface file
3605	OPEN( 151, file='SURFACE_PARAMETERS'//coupling_char, action='read', &
3606	status='old', form='formatted', err=15 )
3607	!-- first test and get n_surface_types
3608	k = 0
3609	l = 0
3610	DO
3611	l = l+1
3612	READ( 151, *, err=11, end=12 ) wtc, wtp, wtn
3613	k = k+1
3614	CYCLE
3615	11 CONTINUE
3616	ENDDO
3617	12 n_surface_types = k
3618	ALLOCATE( surface_type_names(n_surface_types) )
3619	ALLOCATE( surface_type_codes(n_surface_types) )
3620	ALLOCATE( surface_params(n_surface_params, n_surface_types) )
3621	!-- real reading
3622	rewind( 151 )
3623	k = 0
3624	DO
3625	READ( 151, *, err=13, end=14 ) wtc, wtp, wtn
3626	k = k+1
3627	surface_type_codes(k) = wtc
3628	surface_params(:,k) = wtp
3629	surface_type_names(k) = wtn
3630	CYCLE
3631	13 WRITE(6,'(i3,a,2i5)') myid, 'readparams2 error k=', k
3632	FLUSH(6)
3633	CONTINUE
3634	ENDDO
3635	14 CLOSE(151)
3636	CYCLE
3637	15 message_string = 'file SURFACE_PARAMETERS'//TRIM(coupling_char)//' does not exist'
3638	CALL message( 'usm_read_urban_surface_types', 'PA0513', 1, 2, 0, 6, 0 )
3639	ENDIF
3640	ENDDO
3641
3642	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3643	!-- read types of surfaces
3644	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3645	usm_par = 0
3646	DO ii = 0, io_blocks-1
3647	IF ( ii == io_group ) THEN
3648
3649	!
3650	!-- open csv urban surface file
3651	OPEN( 151, file='URBAN_SURFACE'//TRIM(coupling_char), action='read', &
3652	status='old', form='formatted', err=23 )
3653
3654	l = 0
3655	DO
3656	l = l+1
3657	!-- i, j, height, nz, roof, dirwe, dirsn, category, soilcat,
3658	!-- weheight1, wecat1, snheight1, sncat1, weheight2, wecat2, snheight2, sncat2,
3659	!-- weheight3, wecat3, snheight3, sncat3
3660	READ( 151, *, err=21, end=25 ) i, j, height, nz, roof, dirwe, dirsn, &
3661	category, albedo, thick, &
3662	weheight1, wecat1, wealbedo1, wethick1, &
3663	weheight2, wecat2, wealbedo2, wethick2, &
3664	weheight3, wecat3, wealbedo3, wethick3, &
3665	snheight1, sncat1, snalbedo1, snthick1, &
3666	snheight2, sncat2, snalbedo2, snthick2, &
3667	snheight3, sncat3, snalbedo3, snthick3
3668
3669	IF ( i >= nxlg .AND. i <= nxrg .AND. j >= nysg .AND. j <= nyng ) THEN
3670	!-- write integer variables into array
3671	usm_par(:,j,i) = (/1, nz, roof, dirwe, dirsn, category, &
3672	weheight1, wecat1, weheight2, wecat2, weheight3, wecat3, &
3673	snheight1, sncat1, snheight2, sncat2, snheight3, sncat3 /)
3674	!-- write real values into array
3675	usm_val(:,j,i) = (/ albedo, thick, &
3676	wealbedo1, wethick1, wealbedo2, wethick2, &
3677	wealbedo3, wethick3, snalbedo1, snthick1, &
3678	snalbedo2, snthick2, snalbedo3, snthick3 /)
3679	ENDIF
3680	CYCLE
3681	21 WRITE (message_string, "(A,I5)") 'errors in file URBAN_SURFACE'//TRIM(coupling_char)//' on line ', l
3682	CALL message( 'usm_read_urban_surface_types', 'PA0512', 0, 1, 0, 6, 0 )
3683	ENDDO
3684
3685	23 message_string = 'file URBAN_SURFACE'//TRIM(coupling_char)//' does not exist'
3686	CALL message( 'usm_read_urban_surface_types', 'PA0514', 1, 2, 0, 6, 0 )
3687
3688	25 CLOSE( 90 )
3689
3690	ENDIF
3691	#if defined( __parallel ) && ! defined ( __check )
3692	CALL MPI_BARRIER( comm2d, ierr )
3693	#endif
3694	ENDDO
3695
3696	!
3697	!-- check completeness and formal correctness of the data
3698	DO i = nxlg, nxrg
3699	DO j = nysg, nyng
3700	IF ( usm_par(0,j,i) /= 0 .AND. ( & !< incomplete data,supply default values later
3701	usm_par(1,j,i) < nzb .OR. &
3702	usm_par(1,j,i) > nzt .OR. & !< incorrect height (nz < nzb .OR. nz > nzt)
3703	usm_par(2,j,i) < 0 .OR. &
3704	usm_par(2,j,i) > 1 .OR. & !< incorrect roof sign
3705	usm_par(3,j,i) < nzb-nzt .OR. &
3706	usm_par(3,j,i) > nzt-nzb .OR. & !< incorrect west-east wall direction sign
3707	usm_par(4,j,i) < nzb-nzt .OR. &
3708	usm_par(4,j,i) > nzt-nzb .OR. & !< incorrect south-north wall direction sign
3709	usm_par(6,j,i) < nzb .OR. &
3710	usm_par(6,j,i) > nzt .OR. & !< incorrect pedestrian level height for west-east wall
3711	usm_par(8,j,i) > nzt .OR. &
3712	usm_par(10,j,i) > nzt .OR. & !< incorrect wall or roof level height for west-east wall
3713	usm_par(12,j,i) < nzb .OR. &
3714	usm_par(12,j,i) > nzt .OR. & !< incorrect pedestrian level height for south-north wall
3715	usm_par(14,j,i) > nzt .OR. &
3716	usm_par(16,j,i) > nzt & !< incorrect wall or roof level height for south-north wall
3717	) ) THEN
3718	!-- incorrect input data
3719	WRITE (message_string, "(A,2I5)") 'missing or incorrect data in file URBAN_SURFACE'// &
3720	TRIM(coupling_char)//' for i,j=', i,j
3721	CALL message( 'usm_read_urban_surface', 'PA0504', 1, 2, 0, 6, 0 )
3722	ENDIF
3723
3724	ENDDO
3725	ENDDO
3726
3727	!-- assign the surface types to local surface array
3728	DO l = startenergy, endenergy
3729
3730	d = surfl(id,l)
3731	kw = surfl(iz,l)
3732	j = surfl(iy,l)
3733	i = surfl(ix,l)
3734	IF ( d == iroof ) THEN
3735	!-- horizontal surface - land or roof
3736	iw = i
3737	jw = j
3738	IF ( usm_par(5,jw,iw) == 0 ) THEN
3739	IF ( zu(kw) >= roof_height_limit ) THEN
3740	isroof_surf(l) = .TRUE.
3741	surface_types(l) = roof_category !< default category for root surface
3742	ELSE
3743	isroof_surf(l) = .FALSE.
3744	surface_types(l) = land_category !< default category for land surface
3745	ENDIF
3746	albedo_surf(l) = -1.0_wp
3747	thickness_wall(l) = -1.0_wp
3748	ELSE
3749	IF ( usm_par(2,jw,iw)==0 ) THEN
3750	isroof_surf(l) = .FALSE.
3751	thickness_wall(l) = -1.0_wp
3752	ELSE
3753	isroof_surf(l) = .TRUE.
3754	thickness_wall(l) = usm_val(2,jw,iw)
3755	ENDIF
3756	surface_types(l) = usm_par(5,jw,iw)
3757	albedo_surf(l) = usm_val(1,jw,iw)
3758	ENDIF
3759	ELSE
3760	SELECT CASE (d)
3761	CASE (iwest)
3762	iw = i
3763	jw = j
3764	ii = 6
3765	ij = 3
3766	CASE (ieast)
3767	iw = i-1
3768	jw = j
3769	ii = 6
3770	ij = 3
3771	CASE (isouth)
3772	iw = i
3773	jw = j
3774	ii = 12
3775	ij = 9
3776	CASE (inorth)
3777	iw = i
3778	jw = j-1
3779	ii = 12
3780	ij = 9
3781	END SELECT
3782
3783	IF ( kw <= usm_par(ii,jw,iw) ) THEN
3784	!-- pedestrant zone
3785	isroof_surf(l) = .FALSE.
3786	IF ( usm_par(ii+1,jw,iw) == 0 ) THEN
3787	surface_types(l) = pedestrant_category !< default category for wall surface in pedestrant zone
3788	albedo_surf(l) = -1.0_wp
3789	thickness_wall(l) = -1.0_wp
3790	ELSE
3791	surface_types(l) = usm_par(ii+1,jw,iw)
3792	albedo_surf(l) = usm_val(ij,jw,iw)
3793	thickness_wall(l) = usm_val(ij+1,jw,iw)
3794	ENDIF
3795	ELSE IF ( kw <= usm_par(ii+2,jw,iw) ) THEN
3796	!-- wall zone
3797	isroof_surf(l) = .FALSE.
3798	IF ( usm_par(ii+3,jw,iw) == 0 ) THEN
3799	surface_types(l) = wall_category !< default category for wall surface
3800	albedo_surf(l) = -1.0_wp
3801	thickness_wall(l) = -1.0_wp
3802	ELSE
3803	surface_types(l) = usm_par(ii+3,jw,iw)
3804	albedo_surf(l) = usm_val(ij+2,jw,iw)
3805	thickness_wall(l) = usm_val(ij+3,jw,iw)
3806	ENDIF
3807	ELSE IF ( kw <= usm_par(ii+4,jw,iw) ) THEN
3808	!-- roof zone
3809	isroof_surf(l) = .TRUE.
3810	IF ( usm_par(ii+5,jw,iw) == 0 ) THEN
3811	surface_types(l) = roof_category !< default category for roof surface
3812	albedo_surf(l) = -1.0_wp
3813	thickness_wall(l) = -1.0_wp
3814	ELSE
3815	surface_types(l) = usm_par(ii+5,jw,iw)
3816	albedo_surf(l) = usm_val(ij+4,jw,iw)
3817	thickness_wall(l) = usm_val(ij+5,jw,iw)
3818	ENDIF
3819	ELSE
3820	!-- something wrong
3821	CALL message( 'usm_read_urban_surface', 'PA0505', 1, 2, 0, 6, 0 )
3822	ENDIF
3823	ENDIF
3824
3825	!-- find the type position
3826	it = surface_types(l)
3827	ip = -99999
3828	DO k = 1, n_surface_types
3829	IF ( surface_type_codes(k) == it ) THEN
3830	ip = k
3831	EXIT
3832	ENDIF
3833	ENDDO
3834	IF ( ip == -99999 ) THEN
3835	!-- wall category not found
3836	WRITE (message_string, "(A,I5,A,3I5)") 'wall category ', it, ' not found for i,j,k=', iw,jw,kw
3837	CALL message( 'usm_read_urban_surface', 'PA0506', 1, 2, 0, 6, 0 )
3838	ENDIF
3839
3840	!-- Fill out the parameters of the wall
3841	!-- wall surface:
3842
3843	!-- albedo
3844	IF ( albedo_surf(l) < 0.0_wp ) THEN
3845	albedo_surf(l) = surface_params(ialbedo, ip)
3846	ENDIF
3847
3848	!-- emissivity of the wall
3849	emiss_surf(l) = surface_params(iemiss, ip)
3850
3851	!-- heat conductivity Î»S between air and wall ( W mâ2 Kâ1 )
3852	lambda_surf(l) = surface_params(ilambdas, ip)
3853
3854	!-- roughness relative to concrete
3855	roughness_wall(l) = surface_params(irough, ip)
3856
3857	!-- Surface skin layer heat capacity (J mâ2 Kâ1 )
3858	c_surface(l) = surface_params(icsurf, ip)
3859
3860	!-- wall material parameters:
3861
3862	!-- thickness of the wall (m)
3863	!-- missing values are replaced by default value for category
3864	IF ( thickness_wall(l) <= 0.001_wp ) THEN
3865	thickness_wall(l) = surface_params(ithick, ip)
3866	ENDIF
3867
3868	!-- volumetric heat capacity rho_ocean*C of the wall ( J mâ3 Kâ1 )
3869	rho_c_wall(:,l) = surface_params(irhoC, ip)
3870
3871	!-- thermal conductivity Î»H of the wall (W mâ1 Kâ1 )
3872	lambda_h(:,l) = surface_params(ilambdah, ip)
3873
3874	ENDDO
3875
3876	CALL location_message( ' types and parameters of urban surfaces read', .TRUE. )
3877
3878	END SUBROUTINE usm_read_urban_surface_types
3879
3880
3881	!------------------------------------------------------------------------------!
3882	! Description:
3883	! ------------
3884	!> Solver for the energy balance at the ground/roof/wall surface.
3885	!> It follows basic ideas and structure of lsm_energy_balance
3886	!> with many simplifications and adjustments.
3887	!> TODO better description
3888	!------------------------------------------------------------------------------!
3889	SUBROUTINE usm_surface_energy_balance
3890
3891	IMPLICIT NONE
3892
3893	INTEGER(iwp) :: i, j, k, l, d !< running indices
3894
3895	REAL(wp) :: pt1 !< temperature at first grid box adjacent to surface
3896	REAL(wp) :: u1,v1,w1 !< near wall u,v,w
3897	REAL(wp) :: stend !< surface tendency
3898	REAL(wp) :: coef_1 !< first coeficient for prognostic equation
3899	REAL(wp) :: coef_2 !< second coeficient for prognostic equation
3900	REAL(wp) :: rho_cp !< rho_wall_surface * cp
3901	REAL(wp) :: r_a !< aerodynamic resistance for horizontal and vertical surfaces
3902	REAL(wp) :: f_shf !< factor for shf_eb
3903	REAL(wp) :: lambda_surface !< current value of lambda_surface (heat conductivity between air and wall)
3904	REAL(wp) :: Ueff !< effective wind speed for calculation of heat transfer coefficients
3905	REAL(wp) :: httc !< heat transfer coefficient
3906	REAL(wp), DIMENSION(nzub:nzut) :: exn !< value of the Exner function in layers
3907
3908	REAL(wp), DIMENSION(0:4) :: dxdir !< surface normal direction gridbox length
3909	REAL(wp) :: dtime !< simulated time of day (in UTC)
3910	INTEGER(iwp) :: dhour !< simulated hour of day (in UTC)
3911	REAL(wp) :: acoef !< actual coefficient of diurnal profile of anthropogenic heat
3912
3913	dxdir = (/dz,dy,dy,dx,dx/)
3914
3915	exn(:) = (hyp(nzub:nzut) / 100000.0_wp )**0.286_wp !< Exner function
3916
3917	!--
3918	DO l = startenergy, endenergy
3919	!-- Calculate frequently used parameters
3920	d = surfl(id,l)
3921	k = surfl(iz,l)
3922	j = surfl(iy,l)
3923	i = surfl(ix,l)
3924
3925	!-- TODO - how to calculate lambda_surface for horizontal surfaces
3926	!-- (lambda_surface is set according to stratification in land surface model)
3927	IF ( ol(j,i) >= 0.0_wp ) THEN
3928	lambda_surface = lambda_surf(l)
3929	ELSE
3930	lambda_surface = lambda_surf(l)
3931	ENDIF
3932
3933	pt1 = pt(k,j,i)
3934
3935	!-- calculate rho_ocean * cp coefficient at surface layer
3936	rho_cp = cp * hyp(k) / ( r_d * pt1 * exn(k) )
3937
3938	!-- calculate aerodyamic resistance.
3939	IF ( d == iroof ) THEN
3940	!-- calculation for horizontal surfaces follows LSM formulation
3941	!-- pt, us, ts are not available for the prognostic time step,
3942	!-- data from the last time step is used here.
3943
3944	r_a = (pt1 - t_surf(l)/exn(k)) / (ts(j,i) * us(j,i) + 1.0E-10_wp)
3945
3946	!-- make sure that the resistance does not drop to zero
3947	IF ( ABS(r_a) < 1.0E-10_wp ) r_a = 1.0E-10_wp
3948
3949	!-- the parameterization is developed originally for larger scales
3950	!-- (compare with remark in TUF-3D)
3951	!-- our first experiences show that the parameterization underestimates
3952	!-- r_a in meter resolution.
3953	!-- temporary solution - multiplication by magic constant :-(.
3954	r_a = r_a * ra_horiz_coef
3955
3956	!-- factor for shf_eb
3957	f_shf = rho_cp / r_a
3958	ELSE
3959	!-- calculation of r_a for vertical surfaces
3960	!--
3961	!-- heat transfer coefficient for forced convection along vertical walls
3962	!-- follows formulation in TUF3d model (Krayenhoff & Voogt, 2006)
3963	!--
3964	!-- H = httc (Tsfc - Tair)
3965	!-- httc = rw * (11.8 + 4.2 * Ueff) - 4.0
3966	!--
3967	!-- rw: wall patch roughness relative to 1.0 for concrete
3968	!-- Ueff: effective wind speed
3969	!-- - 4.0 is a reduction of Rowley et al (1930) formulation based on
3970	!-- Cole and Sturrock (1977)
3971	!--
3972	!-- Ucan: Canyon wind speed
3973	!-- wstar: convective velocity
3974	!-- Qs: surface heat flux
3975	!-- zH: height of the convective layer
3976	!-- wstar = (g/TcanQszH)**(1./3.)
3977
3978	!-- staggered grid needs to be taken into consideration
3979	IF ( d == inorth ) THEN
3980	u1 = (u(k,j,i)+u(k,j,i+1))*0.5_wp
3981	v1 = v(k,j+1,i)
3982	ELSE IF ( d == isouth ) THEN
3983	u1 = (u(k,j,i)+u(k,j,i+1))*0.5_wp
3984	v1 = v(k,j,i)
3985	ELSE IF ( d == ieast ) THEN
3986	u1 = u(k,j,i+1)
3987	v1 = (v(k,j,i)+v(k,j+1,i))*0.5_wp
3988	ELSE IF ( d == iwest ) THEN
3989	u1 = u(k,j,i)
3990	v1 = (v(k,j,i)+v(k,j+1,i))*0.5_wp
3991	ELSE
3992	STOP
3993	ENDIF
3994	w1 = (w(k,j,i)+w(k-1,j,i))*0.5_wp
3995
3996	Ueff = SQRT(u12 + v12 + w1**2)
3997	httc = roughness_wall(l) * (11.8 + 4.2 * Ueff) - 4.0
3998	f_shf = httc
3999	ENDIF
4000
4001	!-- add LW up so that it can be removed in prognostic equation
4002	rad_net_l(l) = surfinsw(l) - surfoutsw(l) + surfinlw(l) - surfoutlw(l)
4003
4004	!-- numerator of the prognostic equation
4005	coef_1 = rad_net_l(l) + & ! coef +1 corresponds to -lwout included in calculation of radnet_l
4006	(3.0_wp+1.0_wp) * emiss_surf(l) * sigma_sb * t_surf(l) ** 4 + &
4007	f_shf * pt1 + &
4008	lambda_surface * t_wall(nzb_wall,l)
4009
4010	!-- denominator of the prognostic equation
4011	coef_2 = 4.0_wp * emiss_surf(l) * sigma_sb * t_surf(l) ** 3 &
4012	+ lambda_surface + f_shf / exn(k)
4013
4014	!-- implicit solution when the surface layer has no heat capacity,
4015	!-- otherwise use RK3 scheme.
4016	t_surf_p(l) = ( coef_1 * dt_3d * tsc(2) + c_surface(l) * t_surf(l) ) / &
4017	( c_surface(l) + coef_2 * dt_3d * tsc(2) )
4018
4019	!-- add RK3 term
4020	t_surf_p(l) = t_surf_p(l) + dt_3d * tsc(3) * tt_surface_m(l)
4021
4022	!-- calculate true tendency
4023	stend = (t_surf_p(l) - t_surf(l) - dt_3d * tsc(3) * tt_surface_m(l)) / (dt_3d * tsc(2))
4024
4025	!-- calculate t_surf tendencies for the next Runge-Kutta step
4026	IF ( timestep_scheme(1:5) == 'runge' ) THEN
4027	IF ( intermediate_timestep_count == 1 ) THEN
4028	tt_surface_m(l) = stend
4029	ELSEIF ( intermediate_timestep_count < &
4030	intermediate_timestep_count_max ) THEN
4031	tt_surface_m(l) = -9.5625_wp * stend + 5.3125_wp &
4032	* tt_surface_m(l)
4033	ENDIF
4034	ENDIF
4035
4036	!-- in case of fast changes in the skin temperature, it is required to
4037	!-- update the radiative fluxes in order to keep the solution stable
4038	IF ( ABS( t_surf_p(l) - t_surf(l) ) > 1.0_wp ) THEN
4039	force_radiation_call_l = .TRUE.
4040	ENDIF
4041
4042	!-- for horizontal surfaces is pt(nzb_s_inner(j,i),j,i) = pt_surf.
4043	!-- there is no equivalent surface gridpoint for vertical surfaces.
4044	!-- pt(k,j,i) is calculated for all directions in diffusion_s
4045	!-- using surface and wall heat fluxes
4046	IF ( d == iroof ) THEN
4047	pt(nzb_s_inner(j,i),j,i) = t_surf_p(l) / exn(k)
4048	ENDIF
4049
4050	!-- calculate fluxes
4051	!-- rad_net_l is never used!
4052	rad_net_l(l) = rad_net_l(l) + 3.0_wp * sigma_sb &
4053	* t_surf(l)*4 - 4.0_wp sigma_sb &
4054	* t_surf(l)*3 t_surf_p(l)
4055	wghf_eb(l) = lambda_surface * (t_surf_p(l) - t_wall(nzb_wall,l))
4056
4057	!-- ground/wall/roof surface heat flux
4058	wshf_eb(l) = - f_shf * ( pt1 - t_surf_p(l) )
4059
4060	!-- store kinematic surface heat fluxes for utilization in other processes
4061	!-- diffusion_s, surface_layer_fluxes,...
4062	IF ( d == iroof ) THEN
4063	!-- shf is used in diffusion_s and also
4064	!-- for calculation of surface layer fluxes
4065	!-- update for horizontal surfaces
4066	shf(j,i) = wshf_eb(l) / rho_cp
4067	ELSE
4068	!-- surface heat flux for vertical surfaces
4069	!-- used in diffusion_s
4070	wshf(l) = wshf_eb(l) / rho_cp
4071	ENDIF
4072
4073	ENDDO
4074
4075
4076	IF ( usm_anthropogenic_heat .AND. &
4077	intermediate_timestep_count == intermediate_timestep_count_max ) THEN
4078	!-- application of the additional anthropogenic heat sources
4079	!-- we considere the traffic for now so all heat is absorbed
4080	!-- to the first layer, generalization would be worth
4081
4082	!-- calculation of actual profile coefficient
4083	!-- ??? check time_since_reference_point ???
4084	dtime = mod(simulated_time + time_utc_init, 24.0_wp*3600.0_wp)
4085	dhour = INT(dtime/3600.0_wp)
4086	!-- linear interpolation of coeficient
4087	acoef = (REAL(dhour+1,wp)-dtime/3600.0_wp)aheatprof(dhour) + (dtime/3600.0_wp-REAL(dhour,wp))aheatprof(dhour+1)
4088	DO i = nxl, nxr
4089	DO j = nys, nyn
4090	IF ( aheat(j,i) > 0.0_wp ) THEN
4091	!-- TODO the increase of pt in box i,j,nzb_s_inner(j,i)+1 in time dt_3d
4092	!-- given to anthropogenic heat aheatacoef (Wm-2)
4093	!-- k = nzb_s_inner(j,i)+1
4094	!-- pt(k,j,i) = pt(k,j,i) + aheat(j,i)acoefdt_3d/(exn(k)rho_cpdz)
4095	!-- Instead of this, we can adjust shf in case AH only at surface
4096	shf(j,i) = shf(j,i) + aheat(j,i)acoef ddx * ddy / rho_cp
4097	ENDIF
4098	ENDDO
4099	ENDDO
4100	ENDIF
4101
4102	!-- pt and shf are defined on nxlg:nxrg,nysg:nyng
4103	!-- get the borders from neighbours
4104	CALL exchange_horiz( pt, nbgp )
4105	CALL exchange_horiz_2d( shf )
4106
4107
4108	!-- calculation of force_radiation_call:
4109	!-- Make logical OR for all processes.
4110	!-- Force radiation call if at least one processor forces it.
4111	IF ( intermediate_timestep_count == intermediate_timestep_count_max-1 ) &
4112	THEN
4113	#if defined( __parallel )
4114	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
4115	CALL mpi_allreduce( force_radiation_call_l, force_radiation_call, &
4116	1, MPI_LOGICAL, MPI_LOR, comm2d, ierr )
4117	#else
4118	force_radiation_call = force_radiation_call_l
4119	#endif
4120	force_radiation_call_l = .FALSE.
4121	ENDIF
4122
4123	END SUBROUTINE usm_surface_energy_balance
4124
4125
4126	!------------------------------------------------------------------------------!
4127	! Description:
4128	! ------------
4129	!> Swapping of timelevels for t_surf and t_wall
4130	!> called out from subroutine swap_timelevel
4131	!------------------------------------------------------------------------------!
4132	SUBROUTINE usm_swap_timelevel ( mod_count )
4133
4134	IMPLICIT NONE
4135
4136	INTEGER(iwp), INTENT(IN) :: mod_count
4137	INTEGER(iwp) :: i
4138
4139	#if defined( __nopointer )
4140	t_surf = t_surf_p
4141	t_wall = t_wall_p
4142	#else
4143	SELECT CASE ( mod_count )
4144	CASE ( 0 )
4145	t_surf => t_surf_1; t_surf_p => t_surf_2
4146	t_wall => t_wall_1; t_wall_p => t_wall_2
4147	CASE ( 1 )
4148	t_surf => t_surf_2; t_surf_p => t_surf_1
4149	t_wall => t_wall_2; t_wall_p => t_wall_1
4150	END SELECT
4151	#endif
4152
4153	END SUBROUTINE usm_swap_timelevel
4154
4155
4156	!------------------------------------------------------------------------------!
4157	! Description:
4158	! ------------
4159	!
4160	!> This function applies the kinematic wall heat fluxes
4161	!> for walls in four directions for all gridboxes in urban layer.
4162	!> It is called out from subroutine prognostic_equations.
4163	!> TODO Compare performance with cycle runnig l=startwall,endwall...
4164	!------------------------------------------------------------------------------!
4165	SUBROUTINE usm_wall_heat_flux
4166
4167	IMPLICIT NONE
4168
4169	INTEGER(iwp) :: i,j,k,d,l !< running indices
4170
4171	DO l = startenergy, endenergy
4172	j = surfl(iy,l)
4173	i = surfl(ix,l)
4174	k = surfl(iz,l)
4175	d = surfl(id,l)
4176	tend(k,j,i) = tend(k,j,i) + wshf(l) * ddxy2(d)
4177	ENDDO
4178
4179	END SUBROUTINE usm_wall_heat_flux
4180
4181
4182	!------------------------------------------------------------------------------!
4183	! Description:
4184	! ------------
4185	!
4186	!> This function applies the kinematic wall heat fluxes
4187	!> for walls in four directions around the gridbox i,j.
4188	!> It is called out from subroutine prognostic_equations.
4189	!------------------------------------------------------------------------------!
4190	SUBROUTINE usm_wall_heat_flux_ij(i,j)
4191
4192	IMPLICIT NONE
4193
4194	INTEGER(iwp), INTENT(in) :: i,j !< indices of grid box
4195	INTEGER(iwp) :: ii,jj,k,d,l
4196
4197	DO l = startenergy, endenergy
4198	jj = surfl(iy,l)
4199	ii = surfl(ix,l)
4200	IF ( ii == i .AND. jj == j ) THEN
4201	k = surfl(iz,l)
4202	IF ( k >= nzb_s_inner(j,i)+1 .AND. k <= nzb_s_outer(j,i) ) THEN
4203	d = surfl(id,l)
4204	IF ( d >= 1 .and. d <= 4 ) THEN
4205	tend(k,j,i) = tend(k,j,i) + wshf(l) * ddxy2(d)
4206	ENDIF
4207	ENDIF
4208	ENDIF
4209	ENDDO
4210
4211	END SUBROUTINE usm_wall_heat_flux_ij
4212
4213
4214	!------------------------------------------------------------------------------!
4215	!
4216	! Description:
4217	! ------------
4218	!> Subroutine writes t_surf and t_wall data into restart files
4219	!kanani: Renamed this routine according to corresponging routines in PALM
4220	!kanani: Modified the routine to match write_var_list, from where usm_write_restart_data
4221	! shall be called in the future. This part has not been tested yet. (see virtual_flight_mod)
4222	! Also, I had some trouble with the allocation of t_surf, since this is a pointer.
4223	! So, I added some directives here.
4224	!------------------------------------------------------------------------------!
4225	SUBROUTINE usm_write_restart_data
4226
4227	IMPLICIT NONE
4228
4229	INTEGER(iwp) :: i
4230
4231	DO i = 0, io_blocks-1
4232	IF ( i == io_group ) THEN
4233	WRITE ( 14 ) 't_surf '
4234	#if defined( __nopointer )
4235	WRITE ( 14 ) t_surf
4236	#else
4237	WRITE ( 14 ) t_surf_1
4238	#endif
4239	WRITE ( 14 ) 't_wall '
4240	#if defined( __nopointer )
4241	WRITE ( 14 ) t_wall
4242	#else
4243	WRITE ( 14 ) t_wall_1
4244	#endif
4245	WRITE ( 14 ) '* end usm * '
4246	ENDIF
4247	#if defined( __parallel )
4248	CALL MPI_BARRIER( comm2d, ierr )
4249	#endif
4250	ENDDO
4251
4252
4253	END SUBROUTINE usm_write_restart_data
4254
4255
4256	!------------------------------------------------------------------------------!
4257	!
4258	! Description:
4259	! ------------
4260	!> Subroutine stores svf, svfsurf, csf and csfsurf data to a file.
4261	!------------------------------------------------------------------------------!
4262	SUBROUTINE usm_write_svf_to_file
4263
4264	IMPLICIT NONE
4265	INTEGER(iwp) :: fsvf = 89
4266	INTEGER(iwp) :: i
4267
4268	DO i = 0, io_blocks-1
4269	IF ( i == io_group ) THEN
4270	OPEN ( fsvf, file=TRIM(svf_file_name)//TRIM(coupling_char)//myid_char, &
4271	form='unformatted', status='new' )
4272
4273	WRITE ( fsvf ) usm_version
4274	WRITE ( fsvf ) nsvfl, ncsfl
4275	WRITE ( fsvf ) svf
4276	WRITE ( fsvf ) svfsurf
4277	IF ( plant_canopy ) THEN
4278	WRITE ( fsvf ) csf
4279	WRITE ( fsvf ) csfsurf
4280	ENDIF
4281	WRITE ( fsvf ) TRIM(svf_code)
4282
4283	CLOSE (fsvf)
4284	#if defined( __parallel )
4285	CALL MPI_BARRIER( comm2d, ierr )
4286	#endif
4287	ENDIF
4288	ENDDO
4289	END SUBROUTINE usm_write_svf_to_file
4290
4291
4292	!------------------------------------------------------------------------------!
4293	!
4294	! Description:
4295	! ------------
4296	!> Block of auxiliary subroutines:
4297	!> 1. quicksort and corresponding comparison
4298	!> 2. usm_merge_and_grow_csf for implementation of "dynamical growing"
4299	!> array for csf
4300	!------------------------------------------------------------------------------!
4301	PURE FUNCTION svf_lt(svf1,svf2) result (res)
4302	TYPE (t_svf), INTENT(in) :: svf1,svf2
4303	LOGICAL :: res
4304	IF ( svf1%isurflt < svf2%isurflt .OR. &
4305	(svf1%isurflt == svf2%isurflt .AND. svf1%isurfs < svf2%isurfs) ) THEN
4306	res = .TRUE.
4307	ELSE
4308	res = .FALSE.
4309	ENDIF
4310	END FUNCTION svf_lt
4311
4312
4313	!-- quicksort.f --f90--
4314	!-- Author: t-nissie, adaptation J.Resler
4315	!-- License: GPLv3
4316	!-- Gist: https://gist.github.com/t-nissie/479f0f16966925fa29ea
4317	RECURSIVE SUBROUTINE quicksort_svf(svfl, first, last)
4318	IMPLICIT NONE
4319	TYPE(t_svf), DIMENSION(:), INTENT(INOUT) :: svfl
4320	INTEGER(iwp), INTENT(IN) :: first, last
4321	TYPE(t_svf) :: x, t
4322	INTEGER(iwp) :: i, j
4323
4324	IF ( first>=last ) RETURN
4325	x = svfl( (first+last) / 2 )
4326	i = first
4327	j = last
4328	DO
4329	DO while ( svf_lt(svfl(i),x) )
4330	i=i+1
4331	ENDDO
4332	DO while ( svf_lt(x,svfl(j)) )
4333	j=j-1
4334	ENDDO
4335	IF ( i >= j ) EXIT
4336	t = svfl(i); svfl(i) = svfl(j); svfl(j) = t
4337	i=i+1
4338	j=j-1
4339	ENDDO
4340	IF ( first < i-1 ) CALL quicksort_svf(svfl, first, i-1)
4341	IF ( j+1 < last ) CALL quicksort_svf(svfl, j+1, last)
4342	END SUBROUTINE quicksort_svf
4343
4344
4345	PURE FUNCTION csf_lt(csf1,csf2) result (res)
4346	TYPE (t_csf), INTENT(in) :: csf1,csf2
4347	LOGICAL :: res
4348	IF ( csf1%ip < csf2%ip .OR. &
4349	(csf1%ip == csf2%ip .AND. csf1%itx < csf2%itx) .OR. &
4350	(csf1%ip == csf2%ip .AND. csf1%itx == csf2%itx .AND. csf1%ity < csf2%ity) .OR. &
4351	(csf1%ip == csf2%ip .AND. csf1%itx == csf2%itx .AND. csf1%ity == csf2%ity .AND. &
4352	csf1%itz < csf2%itz) .OR. &
4353	(csf1%ip == csf2%ip .AND. csf1%itx == csf2%itx .AND. csf1%ity == csf2%ity .AND. &
4354	csf1%itz == csf2%itz .AND. csf1%isurfs < csf2%isurfs) ) THEN
4355	res = .TRUE.
4356	ELSE
4357	res = .FALSE.
4358	ENDIF
4359	END FUNCTION csf_lt
4360
4361
4362	!-- quicksort.f --f90--
4363	!-- Author: t-nissie, adaptation J.Resler
4364	!-- License: GPLv3
4365	!-- Gist: https://gist.github.com/t-nissie/479f0f16966925fa29ea
4366	RECURSIVE SUBROUTINE quicksort_csf(csfl, first, last)
4367	IMPLICIT NONE
4368	TYPE(t_csf), DIMENSION(:), INTENT(INOUT) :: csfl
4369	INTEGER(iwp), INTENT(IN) :: first, last
4370	TYPE(t_csf) :: x, t
4371	INTEGER(iwp) :: i, j
4372
4373	IF ( first>=last ) RETURN
4374	x = csfl( (first+last)/2 )
4375	i = first
4376	j = last
4377	DO
4378	DO while ( csf_lt(csfl(i),x) )
4379	i=i+1
4380	ENDDO
4381	DO while ( csf_lt(x,csfl(j)) )
4382	j=j-1
4383	ENDDO
4384	IF ( i >= j ) EXIT
4385	t = csfl(i); csfl(i) = csfl(j); csfl(j) = t
4386	i=i+1
4387	j=j-1
4388	ENDDO
4389	IF ( first < i-1 ) CALL quicksort_csf(csfl, first, i-1)
4390	IF ( j+1 < last ) CALL quicksort_csf(csfl, j+1, last)
4391	END SUBROUTINE quicksort_csf
4392
4393
4394	SUBROUTINE usm_merge_and_grow_csf(newsize)
4395	INTEGER(iwp), INTENT(in) :: newsize !< new array size after grow, must be >= ncsfl
4396	!< or -1 to shrink to minimum
4397	INTEGER(iwp) :: iread, iwrite
4398	TYPE(t_csf), DIMENSION(:), POINTER :: acsfnew
4399
4400	IF ( newsize == -1 ) THEN
4401	!-- merge in-place
4402	acsfnew => acsf
4403	ELSE
4404	!-- allocate new array
4405	IF ( mcsf == 0 ) THEN
4406	ALLOCATE( acsf1(newsize) )
4407	acsfnew => acsf1
4408	ELSE
4409	ALLOCATE( acsf2(newsize) )
4410	acsfnew => acsf2
4411	ENDIF
4412	ENDIF
4413
4414	IF ( ncsfl >= 1 ) THEN
4415	!-- sort csf in place (quicksort)
4416	CALL quicksort_csf(acsf,1,ncsfl)
4417
4418	!-- while moving to a new array, aggregate canopy sink factor records with identical box & source
4419	acsfnew(1) = acsf(1)
4420	iwrite = 1
4421	DO iread = 2, ncsfl
4422	!-- here acsf(kcsf) already has values from acsf(icsf)
4423	IF ( acsfnew(iwrite)%itx == acsf(iread)%itx &
4424	.AND. acsfnew(iwrite)%ity == acsf(iread)%ity &
4425	.AND. acsfnew(iwrite)%itz == acsf(iread)%itz &
4426	.AND. acsfnew(iwrite)%isurfs == acsf(iread)%isurfs ) THEN
4427	!-- We could simply take either first or second rtransp, both are valid. As a very simple heuristic about which ray
4428	!-- probably passes nearer the center of the target box, we choose DIF from the entry with greater CSF, since that
4429	!-- might mean that the traced beam passes longer through the canopy box.
4430	IF ( acsfnew(iwrite)%rsvf < acsf(iread)%rsvf ) THEN
4431	acsfnew(iwrite)%rtransp = acsf(iread)%rtransp
4432	ENDIF
4433	acsfnew(iwrite)%rsvf = acsfnew(iwrite)%rsvf + acsf(iread)%rsvf
4434	!-- advance reading index, keep writing index
4435	ELSE
4436	!-- not identical, just advance and copy
4437	iwrite = iwrite + 1
4438	acsfnew(iwrite) = acsf(iread)
4439	ENDIF
4440	ENDDO
4441	ncsfl = iwrite
4442	ENDIF
4443
4444	IF ( newsize == -1 ) THEN
4445	!-- allocate new array and copy shrinked data
4446	IF ( mcsf == 0 ) THEN
4447	ALLOCATE( acsf1(ncsfl) )
4448	acsf1(1:ncsfl) = acsf2(1:ncsfl)
4449	ELSE
4450	ALLOCATE( acsf2(ncsfl) )
4451	acsf2(1:ncsfl) = acsf1(1:ncsfl)
4452	ENDIF
4453	ENDIF
4454
4455	!-- deallocate old array
4456	IF ( mcsf == 0 ) THEN
4457	mcsf = 1
4458	acsf => acsf1
4459	DEALLOCATE( acsf2 )
4460	ELSE
4461	mcsf = 0
4462	acsf => acsf2
4463	DEALLOCATE( acsf1 )
4464	ENDIF
4465	ncsfla = newsize
4466	END SUBROUTINE usm_merge_and_grow_csf
4467
4468
4469	!-- quicksort.f --f90--
4470	!-- Author: t-nissie, adaptation J.Resler
4471	!-- License: GPLv3
4472	!-- Gist: https://gist.github.com/t-nissie/479f0f16966925fa29ea
4473	RECURSIVE SUBROUTINE quicksort_csf2(kpcsflt, pcsflt, first, last)
4474	IMPLICIT NONE
4475	INTEGER(iwp), DIMENSION(:,:), INTENT(INOUT) :: kpcsflt
4476	REAL(wp), DIMENSION(:,:), INTENT(INOUT) :: pcsflt
4477	INTEGER(iwp), INTENT(IN) :: first, last
4478	REAL(wp), DIMENSION(ndcsf) :: t2
4479	INTEGER(iwp), DIMENSION(kdcsf) :: x, t1
4480	INTEGER(iwp) :: i, j
4481
4482	IF ( first>=last ) RETURN
4483	x = kpcsflt(:, (first+last)/2 )
4484	i = first
4485	j = last
4486	DO
4487	DO while ( csf_lt2(kpcsflt(:,i),x) )
4488	i=i+1
4489	ENDDO
4490	DO while ( csf_lt2(x,kpcsflt(:,j)) )
4491	j=j-1
4492	ENDDO
4493	IF ( i >= j ) EXIT
4494	t1 = kpcsflt(:,i); kpcsflt(:,i) = kpcsflt(:,j); kpcsflt(:,j) = t1
4495	t2 = pcsflt(:,i); pcsflt(:,i) = pcsflt(:,j); pcsflt(:,j) = t2
4496	i=i+1
4497	j=j-1
4498	ENDDO
4499	IF ( first < i-1 ) CALL quicksort_csf2(kpcsflt, pcsflt, first, i-1)
4500	IF ( j+1 < last ) CALL quicksort_csf2(kpcsflt, pcsflt, j+1, last)
4501	END SUBROUTINE quicksort_csf2
4502
4503
4504	PURE FUNCTION csf_lt2(item1, item2) result(res)
4505	INTEGER(iwp), DIMENSION(kdcsf), INTENT(in) :: item1, item2
4506	LOGICAL :: res
4507	res = ( (item1(3) < item2(3)) &
4508	.OR. (item1(3) == item2(3) .AND. item1(2) < item2(2)) &
4509	.OR. (item1(3) == item2(3) .AND. item1(2) == item2(2) .AND. item1(1) < item2(1)) &
4510	.OR. (item1(3) == item2(3) .AND. item1(2) == item2(2) .AND. item1(1) == item2(1) &
4511	.AND. item1(4) < item2(4)) )
4512	END FUNCTION csf_lt2
4513
4514
4515	END MODULE urban_surface_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |