Home

Context Navigation

source: palm/trunk/SOURCE/transpose.f90 @ 326

Last change on this file since 326 was 198, checked in by raasch, 16 years ago
file headers updated for the next release 3.5
Property svn:keywords set to `Id`
File size: 17.8 KB

Rev	Line
[164]	1	SUBROUTINE transpose_xy( f_in, work, f_out )
[1]	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[198]	6	!
	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: transpose.f90 198 2008-09-17 08:55:28Z raasch $
	11	!
	12	! 164 2008-05-15 08:46:15Z raasch
[164]	13	! f_inv changed from subroutine argument to automatic array in order to do
	14	! re-ordering from f_in to f_inv in one step, one array work is needed instead
	15	! of work1 and work2
[1]	16	!
[198]	17	! February 2007
[3]	18	! RCS Log replace by Id keyword, revision history cleaned up
	19	!
[1]	20	! Revision 1.2 2004/04/30 13:12:17 raasch
	21	! Switched from mpi_alltoallv to the simpler mpi_alltoall,
	22	! all former transpose-routine files collected in this file, enlarged
	23	! transposition arrays introduced
	24	!
	25	! Revision 1.1 2004/04/30 13:08:16 raasch
	26	! Initial revision (collection of former routines transpose_xy, transpose_xz,
	27	! transpose_yx, transpose_yz, transpose_zx, transpose_zy)
	28	!
	29	! Revision 1.1 1997/07/24 11:25:18 raasch
	30	! Initial revision
	31	!
	32	!
	33	! Description:
	34	! ------------
	35	! Transposition of input array (f_in) from x to y. For the input array, all
	36	! elements along x reside on the same PE, while after transposition, all
	37	! elements along y reside on the same PE.
	38	!------------------------------------------------------------------------------!
	39
	40	USE cpulog
	41	USE indices
	42	USE interfaces
	43	USE pegrid
	44	USE transpose_indices
	45
	46	IMPLICIT NONE
	47
	48	INTEGER :: i, j, k, l, m, ys
	49
	50	REAL :: f_in(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
	51	f_inv(nys_x:nyn_xa,nzb_x:nzt_xa,0:nxa), &
	52	f_out(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
[164]	53	work(nnxnnynnz)
[1]	54
	55	#if defined( __parallel )
	56
	57	!
	58	!-- Rearrange indices of input array in order to make data to be send
	59	!-- by MPI contiguous
	60	DO i = 0, nxa
	61	DO k = nzb_x, nzt_xa
	62	DO j = nys_x, nyn_xa
[164]	63	f_inv(j,k,i) = f_in(i,j,k)
[1]	64	ENDDO
	65	ENDDO
	66	ENDDO
	67
	68	!
	69	!-- Transpose array
	70	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	71	CALL MPI_ALLTOALL( f_inv(nys_x,nzb_x,0), sendrecvcount_xy, MPI_REAL, &
[164]	72	work(1), sendrecvcount_xy, MPI_REAL, &
[1]	73	comm1dy, ierr )
	74	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	75
	76	!
	77	!-- Reorder transposed array
	78	m = 0
	79	DO l = 0, pdims(2) - 1
	80	ys = 0 + l * ( nyn_xa - nys_x + 1 )
	81	DO i = nxl_y, nxr_ya
	82	DO k = nzb_y, nzt_ya
	83	DO j = ys, ys + nyn_xa - nys_x
	84	m = m + 1
[164]	85	f_out(j,i,k) = work(m)
[1]	86	ENDDO
	87	ENDDO
	88	ENDDO
	89	ENDDO
	90
	91	#endif
	92
	93	END SUBROUTINE transpose_xy
	94
	95
[164]	96	SUBROUTINE transpose_xz( f_in, work, f_out )
[1]	97
	98	!------------------------------------------------------------------------------!
	99	! Description:
	100	! ------------
	101	! Transposition of input array (f_in) from x to z. For the input array, all
	102	! elements along x reside on the same PE, while after transposition, all
	103	! elements along z reside on the same PE.
	104	!------------------------------------------------------------------------------!
	105
	106	USE cpulog
	107	USE indices
	108	USE interfaces
	109	USE pegrid
	110	USE transpose_indices
	111
	112	IMPLICIT NONE
	113
	114	INTEGER :: i, j, k, l, m, xs
	115
	116	REAL :: f_in(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	117	f_inv(nys:nyna,nxl:nxra,1:nza), &
[1]	118	f_out(1:nza,nys:nyna,nxl:nxra), &
[164]	119	work(nnxnnynnz)
[1]	120
	121	#if defined( __parallel )
	122
	123	!
	124	!-- If the PE grid is one-dimensional along y, the array has only to be
	125	!-- reordered locally and therefore no transposition has to be done.
	126	IF ( pdims(1) /= 1 ) THEN
	127	!
	128	!-- Reorder input array for transposition
	129	m = 0
	130	DO l = 0, pdims(1) - 1
	131	xs = 0 + l * nnx
	132	DO k = nzb_x, nzt_xa
[164]	133	DO i = xs, xs + nnx - 1
	134	DO j = nys_x, nyn_xa
[1]	135	m = m + 1
[164]	136	work(m) = f_in(i,j,k)
[1]	137	ENDDO
	138	ENDDO
	139	ENDDO
	140	ENDDO
	141
	142	!
	143	!-- Transpose array
	144	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	145	CALL MPI_ALLTOALL( work(1), sendrecvcount_zx, MPI_REAL, &
	146	f_inv(nys,nxl,1), sendrecvcount_zx, MPI_REAL, &
[1]	147	comm1dx, ierr )
	148	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	149
	150	!
	151	!-- Reorder transposed array in a way that the z index is in first position
[164]	152	DO k = 1, nza
	153	DO i = nxl, nxra
	154	DO j = nys, nyna
	155	f_out(k,j,i) = f_inv(j,i,k)
[1]	156	ENDDO
	157	ENDDO
	158	ENDDO
	159	ELSE
	160	!
	161	!-- Reorder the array in a way that the z index is in first position
	162	DO i = nxl, nxra
	163	DO j = nys, nyna
	164	DO k = 1, nza
[164]	165	f_inv(j,i,k) = f_in(i,j,k)
[1]	166	ENDDO
	167	ENDDO
	168	ENDDO
	169
[164]	170	DO k = 1, nza
	171	DO i = nxl, nxra
	172	DO j = nys, nyna
	173	f_out(k,j,i) = f_inv(j,i,k)
	174	ENDDO
[1]	175	ENDDO
	176	ENDDO
	177
[164]	178	ENDIF
	179
	180
[1]	181	#endif
	182
	183	END SUBROUTINE transpose_xz
	184
	185
[164]	186	SUBROUTINE transpose_yx( f_in, work, f_out )
[1]	187
	188	!------------------------------------------------------------------------------!
	189	! Description:
	190	! ------------
	191	! Transposition of input array (f_in) from y to x. For the input array, all
	192	! elements along y reside on the same PE, while after transposition, all
	193	! elements along x reside on the same PE.
	194	!------------------------------------------------------------------------------!
	195
	196	USE cpulog
	197	USE indices
	198	USE interfaces
	199	USE pegrid
	200	USE transpose_indices
	201
	202	IMPLICIT NONE
	203
	204	INTEGER :: i, j, k, l, m, ys
	205
	206	REAL :: f_in(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
	207	f_inv(nys_x:nyn_xa,nzb_x:nzt_xa,0:nxa), &
	208	f_out(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	209	work(nnxnnynnz)
[1]	210
	211	#if defined( __parallel )
	212
	213	!
	214	!-- Reorder input array for transposition
	215	m = 0
	216	DO l = 0, pdims(2) - 1
	217	ys = 0 + l * ( nyn_xa - nys_x + 1 )
	218	DO i = nxl_y, nxr_ya
	219	DO k = nzb_y, nzt_ya
	220	DO j = ys, ys + nyn_xa - nys_x
	221	m = m + 1
[164]	222	work(m) = f_in(j,i,k)
[1]	223	ENDDO
	224	ENDDO
	225	ENDDO
	226	ENDDO
	227
	228	!
	229	!-- Transpose array
	230	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	231	CALL MPI_ALLTOALL( work(1), sendrecvcount_xy, MPI_REAL, &
[1]	232	f_inv(nys_x,nzb_x,0), sendrecvcount_xy, MPI_REAL, &
	233	comm1dy, ierr )
	234	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	235
	236	!
	237	!-- Reorder transposed array in a way that the x index is in first position
	238	DO i = 0, nxa
	239	DO k = nzb_x, nzt_xa
	240	DO j = nys_x, nyn_xa
[164]	241	f_out(i,j,k) = f_inv(j,k,i)
[1]	242	ENDDO
	243	ENDDO
	244	ENDDO
	245
	246	#endif
	247
	248	END SUBROUTINE transpose_yx
	249
	250
[164]	251	SUBROUTINE transpose_yxd( f_in, work, f_out )
[1]	252
	253	!------------------------------------------------------------------------------!
	254	! Description:
	255	! ------------
	256	! Transposition of input array (f_in) from y to x. For the input array, all
	257	! elements along y reside on the same PE, while after transposition, all
	258	! elements along x reside on the same PE.
	259	! This is a direct transposition for arrays with indices in regular order
	260	! (k,j,i) (cf. transpose_yx).
	261	!------------------------------------------------------------------------------!
	262
	263	USE cpulog
	264	USE indices
	265	USE interfaces
	266	USE pegrid
	267	USE transpose_indices
	268
	269	IMPLICIT NONE
	270
	271	INTEGER :: i, j, k, l, m, recvcount_yx, sendcount_yx, xs
	272
	273	REAL :: f_in(1:nza,nys:nyna,nxl:nxra), f_inv(nxl:nxra,1:nza,nys:nyna), &
	274	f_out(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	275	work(nnxnnynnz)
[1]	276
	277	#if defined( __parallel )
	278
	279	!
	280	!-- Rearrange indices of input array in order to make data to be send
	281	!-- by MPI contiguous
	282	DO k = 1, nza
	283	DO j = nys, nyna
	284	DO i = nxl, nxra
[164]	285	f_inv(i,k,j) = f_in(k,j,i)
[1]	286	ENDDO
	287	ENDDO
	288	ENDDO
	289
	290	!
	291	!-- Transpose array
	292	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	293	CALL MPI_ALLTOALL( f_inv(nxl,1,nys), sendrecvcount_xy, MPI_REAL, &
[164]	294	work(1), sendrecvcount_xy, MPI_REAL, &
[1]	295	comm1dx, ierr )
	296	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	297
	298	!
	299	!-- Reorder transposed array
	300	m = 0
	301	DO l = 0, pdims(1) - 1
	302	xs = 0 + l * nnx
	303	DO j = nys_x, nyn_xa
	304	DO k = 1, nza
	305	DO i = xs, xs + nnx - 1
	306	m = m + 1
[164]	307	f_out(i,j,k) = work(m)
[1]	308	ENDDO
	309	ENDDO
	310	ENDDO
	311	ENDDO
	312
	313	#endif
	314
	315	END SUBROUTINE transpose_yxd
	316
	317
[164]	318	SUBROUTINE transpose_yz( f_in, work, f_out )
[1]	319
	320	!------------------------------------------------------------------------------!
	321	! Description:
	322	! ------------
	323	! Transposition of input array (f_in) from y to z. For the input array, all
	324	! elements along y reside on the same PE, while after transposition, all
	325	! elements along z reside on the same PE.
	326	!------------------------------------------------------------------------------!
	327
	328	USE cpulog
	329	USE indices
	330	USE interfaces
	331	USE pegrid
	332	USE transpose_indices
	333
	334	IMPLICIT NONE
	335
	336	INTEGER :: i, j, k, l, m, zs
	337
	338	REAL :: f_in(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
	339	f_inv(nxl_y:nxr_ya,nzb_y:nzt_ya,0:nya), &
	340	f_out(nxl_z:nxr_za,nys_z:nyn_za,1:nza), &
[164]	341	work(nnxnnynnz)
[1]	342
	343	#if defined( __parallel )
	344
	345	!
	346	!-- Rearrange indices of input array in order to make data to be send
	347	!-- by MPI contiguous
[164]	348	DO j = 0, nya
	349	DO k = nzb_y, nzt_ya
	350	DO i = nxl_y, nxr_ya
	351	f_inv(i,k,j) = f_in(j,i,k)
[1]	352	ENDDO
	353	ENDDO
	354	ENDDO
	355
	356	!
	357	!-- Move data to different array, because memory location of work1 is
	358	!-- needed further below (work1 = work2).
	359	!-- If the PE grid is one-dimensional along y, only local reordering
	360	!-- of the data is necessary and no transposition has to be done.
	361	IF ( pdims(1) == 1 ) THEN
	362	DO j = 0, nya
	363	DO k = nzb_y, nzt_ya
	364	DO i = nxl_y, nxr_ya
[164]	365	f_out(i,j,k) = f_inv(i,k,j)
[1]	366	ENDDO
	367	ENDDO
	368	ENDDO
	369	RETURN
	370	ENDIF
	371
	372	!
	373	!-- Transpose array
	374	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	375	CALL MPI_ALLTOALL( f_inv(nxl_y,nzb_y,0), sendrecvcount_yz, MPI_REAL, &
[164]	376	work(1), sendrecvcount_yz, MPI_REAL, &
[1]	377	comm1dx, ierr )
	378	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	379
	380	!
	381	!-- Reorder transposed array
	382	m = 0
	383	DO l = 0, pdims(1) - 1
	384	zs = 1 + l * ( nzt_ya - nzb_y + 1 )
	385	DO j = nys_z, nyn_za
	386	DO k = zs, zs + nzt_ya - nzb_y
	387	DO i = nxl_z, nxr_za
	388	m = m + 1
[164]	389	f_out(i,j,k) = work(m)
[1]	390	ENDDO
	391	ENDDO
	392	ENDDO
	393	ENDDO
	394
	395	#endif
	396
	397	END SUBROUTINE transpose_yz
	398
	399
[164]	400	SUBROUTINE transpose_zx( f_in, work, f_out )
[1]	401
	402	!------------------------------------------------------------------------------!
	403	! Description:
	404	! ------------
	405	! Transposition of input array (f_in) from z to x. For the input array, all
	406	! elements along z reside on the same PE, while after transposition, all
	407	! elements along x reside on the same PE.
	408	!------------------------------------------------------------------------------!
	409
	410	USE cpulog
	411	USE indices
	412	USE interfaces
	413	USE pegrid
	414	USE transpose_indices
	415
	416	IMPLICIT NONE
	417
	418	INTEGER :: i, j, k, l, m, xs
	419
[164]	420	REAL :: f_in(1:nza,nys:nyna,nxl:nxra), f_inv(nys:nyna,nxl:nxra,1:nza), &
[1]	421	f_out(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	422	work(nnxnnynnz)
[1]	423
	424	#if defined( __parallel )
	425
	426	!
	427	!-- Rearrange indices of input array in order to make data to be send
	428	!-- by MPI contiguous
[164]	429	DO k = 1,nza
	430	DO i = nxl, nxra
	431	DO j = nys, nyna
	432	f_inv(j,i,k) = f_in(k,j,i)
[1]	433	ENDDO
	434	ENDDO
	435	ENDDO
	436
	437	!
	438	!-- Move data to different array, because memory location of work1 is
	439	!-- needed further below (work1 = work2).
	440	!-- If the PE grid is one-dimensional along y, only local reordering
	441	!-- of the data is necessary and no transposition has to be done.
	442	IF ( pdims(1) == 1 ) THEN
	443	DO k = 1, nza
[164]	444	DO i = nxl, nxra
	445	DO j = nys, nyna
	446	f_out(i,j,k) = f_inv(j,i,k)
[1]	447	ENDDO
	448	ENDDO
	449	ENDDO
	450	RETURN
	451	ENDIF
	452
	453	!
	454	!-- Transpose array
	455	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	456	CALL MPI_ALLTOALL( f_inv(nys,nxl,1), sendrecvcount_zx, MPI_REAL, &
	457	work(1), sendrecvcount_zx, MPI_REAL, &
[1]	458	comm1dx, ierr )
	459	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	460
	461	!
	462	!-- Reorder transposed array
	463	m = 0
	464	DO l = 0, pdims(1) - 1
	465	xs = 0 + l * nnx
	466	DO k = nzb_x, nzt_xa
[164]	467	DO i = xs, xs + nnx - 1
	468	DO j = nys_x, nyn_xa
[1]	469	m = m + 1
[164]	470	f_out(i,j,k) = work(m)
[1]	471	ENDDO
	472	ENDDO
	473	ENDDO
	474	ENDDO
	475
	476	#endif
	477
	478	END SUBROUTINE transpose_zx
	479
	480
[164]	481	SUBROUTINE transpose_zy( f_in, work, f_out )
[1]	482
	483	!------------------------------------------------------------------------------!
	484	! Description:
	485	! ------------
	486	! Transposition of input array (f_in) from z to y. For the input array, all
	487	! elements along z reside on the same PE, while after transposition, all
	488	! elements along y reside on the same PE.
	489	!------------------------------------------------------------------------------!
	490
	491	USE cpulog
	492	USE indices
	493	USE interfaces
	494	USE pegrid
	495	USE transpose_indices
	496
	497	IMPLICIT NONE
	498
	499	INTEGER :: i, j, k, l, m, zs
	500
	501	REAL :: f_in(nxl_z:nxr_za,nys_z:nyn_za,1:nza), &
	502	f_inv(nxl_y:nxr_ya,nzb_y:nzt_ya,0:nya), &
	503	f_out(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
[164]	504	work(nnxnnynnz)
[1]	505
	506	#if defined( __parallel )
	507
	508	!
	509	!-- If the PE grid is one-dimensional along y, the array has only to be
	510	!-- reordered locally and therefore no transposition has to be done.
	511	IF ( pdims(1) /= 1 ) THEN
	512	!
	513	!-- Reorder input array for transposition
	514	m = 0
	515	DO l = 0, pdims(1) - 1
	516	zs = 1 + l * ( nzt_ya - nzb_y + 1 )
	517	DO j = nys_z, nyn_za
	518	DO k = zs, zs + nzt_ya - nzb_y
	519	DO i = nxl_z, nxr_za
	520	m = m + 1
[164]	521	work(m) = f_in(i,j,k)
[1]	522	ENDDO
	523	ENDDO
	524	ENDDO
	525	ENDDO
	526
	527	!
	528	!-- Transpose array
	529	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	530	CALL MPI_ALLTOALL( work(1), sendrecvcount_yz, MPI_REAL, &
[1]	531	f_inv(nxl_y,nzb_y,0), sendrecvcount_yz, MPI_REAL, &
	532	comm1dx, ierr )
	533	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	534
	535	!
	536	!-- Reorder transposed array in a way that the y index is in first position
[164]	537	DO j = 0, nya
	538	DO k = nzb_y, nzt_ya
	539	DO i = nxl_y, nxr_ya
	540	f_out(j,i,k) = f_inv(i,k,j)
[1]	541	ENDDO
	542	ENDDO
	543	ENDDO
	544	ELSE
	545	!
	546	!-- Reorder the array in a way that the y index is in first position
	547	DO k = nzb_y, nzt_ya
[164]	548	DO j = 0, nya
	549	DO i = nxl_y, nxr_ya
	550	f_inv(i,k,j) = f_in(i,j,k)
	551	ENDDO
	552	ENDDO
	553	ENDDO
	554	!
	555	!-- Move data to output array
	556	DO k = nzb_y, nzt_ya
[1]	557	DO i = nxl_y, nxr_ya
	558	DO j = 0, nya
[164]	559	f_out(j,i,k) = f_inv(i,k,j)
[1]	560	ENDDO
	561	ENDDO
	562	ENDDO
[164]	563
[1]	564	ENDIF
	565
	566	#endif
	567
	568	END SUBROUTINE transpose_zy
	569
	570
[164]	571	SUBROUTINE transpose_zyd( f_in, work, f_out )
[1]	572
	573	!------------------------------------------------------------------------------!
	574	! Description:
	575	! ------------
	576	! Transposition of input array (f_in) from z to y. For the input array, all
	577	! elements along z reside on the same PE, while after transposition, all
	578	! elements along y reside on the same PE.
	579	! This is a direct transposition for arrays with indices in regular order
	580	! (k,j,i) (cf. transpose_zy).
	581	!------------------------------------------------------------------------------!
	582
	583	USE cpulog
	584	USE indices
	585	USE interfaces
	586	USE pegrid
	587	USE transpose_indices
	588
	589	IMPLICIT NONE
	590
	591	INTEGER :: i, j, k, l, m, ys
	592
	593	REAL :: f_in(1:nza,nys:nyna,nxl:nxra), f_inv(nys:nyna,nxl:nxra,1:nza), &
	594	f_out(0:nya,nxl_yd:nxr_yda,nzb_yd:nzt_yda), &
[164]	595	work(nnxnnynnz)
[1]	596
	597	#if defined( __parallel )
	598
	599	!
	600	!-- Rearrange indices of input array in order to make data to be send
	601	!-- by MPI contiguous
	602	DO i = nxl, nxra
	603	DO j = nys, nyna
	604	DO k = 1, nza
[164]	605	f_inv(j,i,k) = f_in(k,j,i)
[1]	606	ENDDO
	607	ENDDO
	608	ENDDO
	609
	610	!
	611	!-- Move data to different array, because memory location of work1 is
	612	!-- needed further below (work1 = work2).
	613	!-- If the PE grid is one-dimensional along x, only local reordering
	614	!-- of the data is necessary and no transposition has to be done.
	615	IF ( pdims(2) == 1 ) THEN
	616	DO k = 1, nza
	617	DO i = nxl, nxra
	618	DO j = nys, nyna
[164]	619	f_out(j,i,k) = f_inv(j,i,k)
[1]	620	ENDDO
	621	ENDDO
	622	ENDDO
	623	RETURN
	624	ENDIF
	625
	626	!
	627	!-- Transpose array
	628	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	629	CALL MPI_ALLTOALL( f_inv(nys,nxl,1), sendrecvcount_zyd, MPI_REAL, &
[164]	630	work(1), sendrecvcount_zyd, MPI_REAL, &
[1]	631	comm1dy, ierr )
	632	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	633
	634	!
	635	!-- Reorder transposed array
	636	m = 0
	637	DO l = 0, pdims(2) - 1
	638	ys = 0 + l * nny
	639	DO k = nzb_yd, nzt_yda
	640	DO i = nxl_yd, nxr_yda
	641	DO j = ys, ys + nny - 1
	642	m = m + 1
[164]	643	f_out(j,i,k) = work(m)
[1]	644	ENDDO
	645	ENDDO
	646	ENDDO
	647	ENDDO
	648
	649	#endif
	650
	651	END SUBROUTINE transpose_zyd

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |