Home

Context Navigation

source: palm/trunk/SOURCE/transpose.f90 @ 193

Last change on this file since 193 was 164, checked in by raasch, 17 years ago
optimization of transpositions for 2D decompositions, workaround for using -env option with mpiexec, adjustments for lcxt4
Property svn:keywords set to `Id`
File size: 17.7 KB

Rev	Line
[164]	1	SUBROUTINE transpose_xy( f_in, work, f_out )
[1]	2
	3	!------------------------------------------------------------------------------!
	4	! Actual revisions:
	5	! -----------------
[164]	6	! f_inv changed from subroutine argument to automatic array in order to do
	7	! re-ordering from f_in to f_inv in one step, one array work is needed instead
	8	! of work1 and work2
[1]	9	!
	10	! Former revisions:
	11	! -----------------
[3]	12	! $Id: transpose.f90 164 2008-05-15 08:46:15Z raasch $
	13	! RCS Log replace by Id keyword, revision history cleaned up
	14	!
[1]	15	! Revision 1.2 2004/04/30 13:12:17 raasch
	16	! Switched from mpi_alltoallv to the simpler mpi_alltoall,
	17	! all former transpose-routine files collected in this file, enlarged
	18	! transposition arrays introduced
	19	!
	20	! Revision 1.1 2004/04/30 13:08:16 raasch
	21	! Initial revision (collection of former routines transpose_xy, transpose_xz,
	22	! transpose_yx, transpose_yz, transpose_zx, transpose_zy)
	23	!
	24	! Revision 1.1 1997/07/24 11:25:18 raasch
	25	! Initial revision
	26	!
	27	!
	28	! Description:
	29	! ------------
	30	! Transposition of input array (f_in) from x to y. For the input array, all
	31	! elements along x reside on the same PE, while after transposition, all
	32	! elements along y reside on the same PE.
	33	!------------------------------------------------------------------------------!
	34
	35	USE cpulog
	36	USE indices
	37	USE interfaces
	38	USE pegrid
	39	USE transpose_indices
	40
	41	IMPLICIT NONE
	42
	43	INTEGER :: i, j, k, l, m, ys
	44
	45	REAL :: f_in(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
	46	f_inv(nys_x:nyn_xa,nzb_x:nzt_xa,0:nxa), &
	47	f_out(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
[164]	48	work(nnxnnynnz)
[1]	49
	50	#if defined( __parallel )
	51
	52	!
	53	!-- Rearrange indices of input array in order to make data to be send
	54	!-- by MPI contiguous
	55	DO i = 0, nxa
	56	DO k = nzb_x, nzt_xa
	57	DO j = nys_x, nyn_xa
[164]	58	f_inv(j,k,i) = f_in(i,j,k)
[1]	59	ENDDO
	60	ENDDO
	61	ENDDO
	62
	63	!
	64	!-- Transpose array
	65	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	66	CALL MPI_ALLTOALL( f_inv(nys_x,nzb_x,0), sendrecvcount_xy, MPI_REAL, &
[164]	67	work(1), sendrecvcount_xy, MPI_REAL, &
[1]	68	comm1dy, ierr )
	69	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	70
	71	!
	72	!-- Reorder transposed array
	73	m = 0
	74	DO l = 0, pdims(2) - 1
	75	ys = 0 + l * ( nyn_xa - nys_x + 1 )
	76	DO i = nxl_y, nxr_ya
	77	DO k = nzb_y, nzt_ya
	78	DO j = ys, ys + nyn_xa - nys_x
	79	m = m + 1
[164]	80	f_out(j,i,k) = work(m)
[1]	81	ENDDO
	82	ENDDO
	83	ENDDO
	84	ENDDO
	85
	86	#endif
	87
	88	END SUBROUTINE transpose_xy
	89
	90
[164]	91	SUBROUTINE transpose_xz( f_in, work, f_out )
[1]	92
	93	!------------------------------------------------------------------------------!
	94	! Description:
	95	! ------------
	96	! Transposition of input array (f_in) from x to z. For the input array, all
	97	! elements along x reside on the same PE, while after transposition, all
	98	! elements along z reside on the same PE.
	99	!------------------------------------------------------------------------------!
	100
	101	USE cpulog
	102	USE indices
	103	USE interfaces
	104	USE pegrid
	105	USE transpose_indices
	106
	107	IMPLICIT NONE
	108
	109	INTEGER :: i, j, k, l, m, xs
	110
	111	REAL :: f_in(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	112	f_inv(nys:nyna,nxl:nxra,1:nza), &
[1]	113	f_out(1:nza,nys:nyna,nxl:nxra), &
[164]	114	work(nnxnnynnz)
[1]	115
	116	#if defined( __parallel )
	117
	118	!
	119	!-- If the PE grid is one-dimensional along y, the array has only to be
	120	!-- reordered locally and therefore no transposition has to be done.
	121	IF ( pdims(1) /= 1 ) THEN
	122	!
	123	!-- Reorder input array for transposition
	124	m = 0
	125	DO l = 0, pdims(1) - 1
	126	xs = 0 + l * nnx
	127	DO k = nzb_x, nzt_xa
[164]	128	DO i = xs, xs + nnx - 1
	129	DO j = nys_x, nyn_xa
[1]	130	m = m + 1
[164]	131	work(m) = f_in(i,j,k)
[1]	132	ENDDO
	133	ENDDO
	134	ENDDO
	135	ENDDO
	136
	137	!
	138	!-- Transpose array
	139	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	140	CALL MPI_ALLTOALL( work(1), sendrecvcount_zx, MPI_REAL, &
	141	f_inv(nys,nxl,1), sendrecvcount_zx, MPI_REAL, &
[1]	142	comm1dx, ierr )
	143	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	144
	145	!
	146	!-- Reorder transposed array in a way that the z index is in first position
[164]	147	DO k = 1, nza
	148	DO i = nxl, nxra
	149	DO j = nys, nyna
	150	f_out(k,j,i) = f_inv(j,i,k)
[1]	151	ENDDO
	152	ENDDO
	153	ENDDO
	154	ELSE
	155	!
	156	!-- Reorder the array in a way that the z index is in first position
	157	DO i = nxl, nxra
	158	DO j = nys, nyna
	159	DO k = 1, nza
[164]	160	f_inv(j,i,k) = f_in(i,j,k)
[1]	161	ENDDO
	162	ENDDO
	163	ENDDO
	164
[164]	165	DO k = 1, nza
	166	DO i = nxl, nxra
	167	DO j = nys, nyna
	168	f_out(k,j,i) = f_inv(j,i,k)
	169	ENDDO
[1]	170	ENDDO
	171	ENDDO
	172
[164]	173	ENDIF
	174
	175
[1]	176	#endif
	177
	178	END SUBROUTINE transpose_xz
	179
	180
[164]	181	SUBROUTINE transpose_yx( f_in, work, f_out )
[1]	182
	183	!------------------------------------------------------------------------------!
	184	! Description:
	185	! ------------
	186	! Transposition of input array (f_in) from y to x. For the input array, all
	187	! elements along y reside on the same PE, while after transposition, all
	188	! elements along x reside on the same PE.
	189	!------------------------------------------------------------------------------!
	190
	191	USE cpulog
	192	USE indices
	193	USE interfaces
	194	USE pegrid
	195	USE transpose_indices
	196
	197	IMPLICIT NONE
	198
	199	INTEGER :: i, j, k, l, m, ys
	200
	201	REAL :: f_in(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
	202	f_inv(nys_x:nyn_xa,nzb_x:nzt_xa,0:nxa), &
	203	f_out(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	204	work(nnxnnynnz)
[1]	205
	206	#if defined( __parallel )
	207
	208	!
	209	!-- Reorder input array for transposition
	210	m = 0
	211	DO l = 0, pdims(2) - 1
	212	ys = 0 + l * ( nyn_xa - nys_x + 1 )
	213	DO i = nxl_y, nxr_ya
	214	DO k = nzb_y, nzt_ya
	215	DO j = ys, ys + nyn_xa - nys_x
	216	m = m + 1
[164]	217	work(m) = f_in(j,i,k)
[1]	218	ENDDO
	219	ENDDO
	220	ENDDO
	221	ENDDO
	222
	223	!
	224	!-- Transpose array
	225	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	226	CALL MPI_ALLTOALL( work(1), sendrecvcount_xy, MPI_REAL, &
[1]	227	f_inv(nys_x,nzb_x,0), sendrecvcount_xy, MPI_REAL, &
	228	comm1dy, ierr )
	229	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	230
	231	!
	232	!-- Reorder transposed array in a way that the x index is in first position
	233	DO i = 0, nxa
	234	DO k = nzb_x, nzt_xa
	235	DO j = nys_x, nyn_xa
[164]	236	f_out(i,j,k) = f_inv(j,k,i)
[1]	237	ENDDO
	238	ENDDO
	239	ENDDO
	240
	241	#endif
	242
	243	END SUBROUTINE transpose_yx
	244
	245
[164]	246	SUBROUTINE transpose_yxd( f_in, work, f_out )
[1]	247
	248	!------------------------------------------------------------------------------!
	249	! Description:
	250	! ------------
	251	! Transposition of input array (f_in) from y to x. For the input array, all
	252	! elements along y reside on the same PE, while after transposition, all
	253	! elements along x reside on the same PE.
	254	! This is a direct transposition for arrays with indices in regular order
	255	! (k,j,i) (cf. transpose_yx).
	256	!------------------------------------------------------------------------------!
	257
	258	USE cpulog
	259	USE indices
	260	USE interfaces
	261	USE pegrid
	262	USE transpose_indices
	263
	264	IMPLICIT NONE
	265
	266	INTEGER :: i, j, k, l, m, recvcount_yx, sendcount_yx, xs
	267
	268	REAL :: f_in(1:nza,nys:nyna,nxl:nxra), f_inv(nxl:nxra,1:nza,nys:nyna), &
	269	f_out(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	270	work(nnxnnynnz)
[1]	271
	272	#if defined( __parallel )
	273
	274	!
	275	!-- Rearrange indices of input array in order to make data to be send
	276	!-- by MPI contiguous
	277	DO k = 1, nza
	278	DO j = nys, nyna
	279	DO i = nxl, nxra
[164]	280	f_inv(i,k,j) = f_in(k,j,i)
[1]	281	ENDDO
	282	ENDDO
	283	ENDDO
	284
	285	!
	286	!-- Transpose array
	287	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	288	CALL MPI_ALLTOALL( f_inv(nxl,1,nys), sendrecvcount_xy, MPI_REAL, &
[164]	289	work(1), sendrecvcount_xy, MPI_REAL, &
[1]	290	comm1dx, ierr )
	291	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	292
	293	!
	294	!-- Reorder transposed array
	295	m = 0
	296	DO l = 0, pdims(1) - 1
	297	xs = 0 + l * nnx
	298	DO j = nys_x, nyn_xa
	299	DO k = 1, nza
	300	DO i = xs, xs + nnx - 1
	301	m = m + 1
[164]	302	f_out(i,j,k) = work(m)
[1]	303	ENDDO
	304	ENDDO
	305	ENDDO
	306	ENDDO
	307
	308	#endif
	309
	310	END SUBROUTINE transpose_yxd
	311
	312
[164]	313	SUBROUTINE transpose_yz( f_in, work, f_out )
[1]	314
	315	!------------------------------------------------------------------------------!
	316	! Description:
	317	! ------------
	318	! Transposition of input array (f_in) from y to z. For the input array, all
	319	! elements along y reside on the same PE, while after transposition, all
	320	! elements along z reside on the same PE.
	321	!------------------------------------------------------------------------------!
	322
	323	USE cpulog
	324	USE indices
	325	USE interfaces
	326	USE pegrid
	327	USE transpose_indices
	328
	329	IMPLICIT NONE
	330
	331	INTEGER :: i, j, k, l, m, zs
	332
	333	REAL :: f_in(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
	334	f_inv(nxl_y:nxr_ya,nzb_y:nzt_ya,0:nya), &
	335	f_out(nxl_z:nxr_za,nys_z:nyn_za,1:nza), &
[164]	336	work(nnxnnynnz)
[1]	337
	338	#if defined( __parallel )
	339
	340	!
	341	!-- Rearrange indices of input array in order to make data to be send
	342	!-- by MPI contiguous
[164]	343	DO j = 0, nya
	344	DO k = nzb_y, nzt_ya
	345	DO i = nxl_y, nxr_ya
	346	f_inv(i,k,j) = f_in(j,i,k)
[1]	347	ENDDO
	348	ENDDO
	349	ENDDO
	350
	351	!
	352	!-- Move data to different array, because memory location of work1 is
	353	!-- needed further below (work1 = work2).
	354	!-- If the PE grid is one-dimensional along y, only local reordering
	355	!-- of the data is necessary and no transposition has to be done.
	356	IF ( pdims(1) == 1 ) THEN
	357	DO j = 0, nya
	358	DO k = nzb_y, nzt_ya
	359	DO i = nxl_y, nxr_ya
[164]	360	f_out(i,j,k) = f_inv(i,k,j)
[1]	361	ENDDO
	362	ENDDO
	363	ENDDO
	364	RETURN
	365	ENDIF
	366
	367	!
	368	!-- Transpose array
	369	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	370	CALL MPI_ALLTOALL( f_inv(nxl_y,nzb_y,0), sendrecvcount_yz, MPI_REAL, &
[164]	371	work(1), sendrecvcount_yz, MPI_REAL, &
[1]	372	comm1dx, ierr )
	373	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	374
	375	!
	376	!-- Reorder transposed array
	377	m = 0
	378	DO l = 0, pdims(1) - 1
	379	zs = 1 + l * ( nzt_ya - nzb_y + 1 )
	380	DO j = nys_z, nyn_za
	381	DO k = zs, zs + nzt_ya - nzb_y
	382	DO i = nxl_z, nxr_za
	383	m = m + 1
[164]	384	f_out(i,j,k) = work(m)
[1]	385	ENDDO
	386	ENDDO
	387	ENDDO
	388	ENDDO
	389
	390	#endif
	391
	392	END SUBROUTINE transpose_yz
	393
	394
[164]	395	SUBROUTINE transpose_zx( f_in, work, f_out )
[1]	396
	397	!------------------------------------------------------------------------------!
	398	! Description:
	399	! ------------
	400	! Transposition of input array (f_in) from z to x. For the input array, all
	401	! elements along z reside on the same PE, while after transposition, all
	402	! elements along x reside on the same PE.
	403	!------------------------------------------------------------------------------!
	404
	405	USE cpulog
	406	USE indices
	407	USE interfaces
	408	USE pegrid
	409	USE transpose_indices
	410
	411	IMPLICIT NONE
	412
	413	INTEGER :: i, j, k, l, m, xs
	414
[164]	415	REAL :: f_in(1:nza,nys:nyna,nxl:nxra), f_inv(nys:nyna,nxl:nxra,1:nza), &
[1]	416	f_out(0:nxa,nys_x:nyn_xa,nzb_x:nzt_xa), &
[164]	417	work(nnxnnynnz)
[1]	418
	419	#if defined( __parallel )
	420
	421	!
	422	!-- Rearrange indices of input array in order to make data to be send
	423	!-- by MPI contiguous
[164]	424	DO k = 1,nza
	425	DO i = nxl, nxra
	426	DO j = nys, nyna
	427	f_inv(j,i,k) = f_in(k,j,i)
[1]	428	ENDDO
	429	ENDDO
	430	ENDDO
	431
	432	!
	433	!-- Move data to different array, because memory location of work1 is
	434	!-- needed further below (work1 = work2).
	435	!-- If the PE grid is one-dimensional along y, only local reordering
	436	!-- of the data is necessary and no transposition has to be done.
	437	IF ( pdims(1) == 1 ) THEN
	438	DO k = 1, nza
[164]	439	DO i = nxl, nxra
	440	DO j = nys, nyna
	441	f_out(i,j,k) = f_inv(j,i,k)
[1]	442	ENDDO
	443	ENDDO
	444	ENDDO
	445	RETURN
	446	ENDIF
	447
	448	!
	449	!-- Transpose array
	450	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	451	CALL MPI_ALLTOALL( f_inv(nys,nxl,1), sendrecvcount_zx, MPI_REAL, &
	452	work(1), sendrecvcount_zx, MPI_REAL, &
[1]	453	comm1dx, ierr )
	454	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	455
	456	!
	457	!-- Reorder transposed array
	458	m = 0
	459	DO l = 0, pdims(1) - 1
	460	xs = 0 + l * nnx
	461	DO k = nzb_x, nzt_xa
[164]	462	DO i = xs, xs + nnx - 1
	463	DO j = nys_x, nyn_xa
[1]	464	m = m + 1
[164]	465	f_out(i,j,k) = work(m)
[1]	466	ENDDO
	467	ENDDO
	468	ENDDO
	469	ENDDO
	470
	471	#endif
	472
	473	END SUBROUTINE transpose_zx
	474
	475
[164]	476	SUBROUTINE transpose_zy( f_in, work, f_out )
[1]	477
	478	!------------------------------------------------------------------------------!
	479	! Description:
	480	! ------------
	481	! Transposition of input array (f_in) from z to y. For the input array, all
	482	! elements along z reside on the same PE, while after transposition, all
	483	! elements along y reside on the same PE.
	484	!------------------------------------------------------------------------------!
	485
	486	USE cpulog
	487	USE indices
	488	USE interfaces
	489	USE pegrid
	490	USE transpose_indices
	491
	492	IMPLICIT NONE
	493
	494	INTEGER :: i, j, k, l, m, zs
	495
	496	REAL :: f_in(nxl_z:nxr_za,nys_z:nyn_za,1:nza), &
	497	f_inv(nxl_y:nxr_ya,nzb_y:nzt_ya,0:nya), &
	498	f_out(0:nya,nxl_y:nxr_ya,nzb_y:nzt_ya), &
[164]	499	work(nnxnnynnz)
[1]	500
	501	#if defined( __parallel )
	502
	503	!
	504	!-- If the PE grid is one-dimensional along y, the array has only to be
	505	!-- reordered locally and therefore no transposition has to be done.
	506	IF ( pdims(1) /= 1 ) THEN
	507	!
	508	!-- Reorder input array for transposition
	509	m = 0
	510	DO l = 0, pdims(1) - 1
	511	zs = 1 + l * ( nzt_ya - nzb_y + 1 )
	512	DO j = nys_z, nyn_za
	513	DO k = zs, zs + nzt_ya - nzb_y
	514	DO i = nxl_z, nxr_za
	515	m = m + 1
[164]	516	work(m) = f_in(i,j,k)
[1]	517	ENDDO
	518	ENDDO
	519	ENDDO
	520	ENDDO
	521
	522	!
	523	!-- Transpose array
	524	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
[164]	525	CALL MPI_ALLTOALL( work(1), sendrecvcount_yz, MPI_REAL, &
[1]	526	f_inv(nxl_y,nzb_y,0), sendrecvcount_yz, MPI_REAL, &
	527	comm1dx, ierr )
	528	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	529
	530	!
	531	!-- Reorder transposed array in a way that the y index is in first position
[164]	532	DO j = 0, nya
	533	DO k = nzb_y, nzt_ya
	534	DO i = nxl_y, nxr_ya
	535	f_out(j,i,k) = f_inv(i,k,j)
[1]	536	ENDDO
	537	ENDDO
	538	ENDDO
	539	ELSE
	540	!
	541	!-- Reorder the array in a way that the y index is in first position
	542	DO k = nzb_y, nzt_ya
[164]	543	DO j = 0, nya
	544	DO i = nxl_y, nxr_ya
	545	f_inv(i,k,j) = f_in(i,j,k)
	546	ENDDO
	547	ENDDO
	548	ENDDO
	549	!
	550	!-- Move data to output array
	551	DO k = nzb_y, nzt_ya
[1]	552	DO i = nxl_y, nxr_ya
	553	DO j = 0, nya
[164]	554	f_out(j,i,k) = f_inv(i,k,j)
[1]	555	ENDDO
	556	ENDDO
	557	ENDDO
[164]	558
[1]	559	ENDIF
	560
	561	#endif
	562
	563	END SUBROUTINE transpose_zy
	564
	565
[164]	566	SUBROUTINE transpose_zyd( f_in, work, f_out )
[1]	567
	568	!------------------------------------------------------------------------------!
	569	! Description:
	570	! ------------
	571	! Transposition of input array (f_in) from z to y. For the input array, all
	572	! elements along z reside on the same PE, while after transposition, all
	573	! elements along y reside on the same PE.
	574	! This is a direct transposition for arrays with indices in regular order
	575	! (k,j,i) (cf. transpose_zy).
	576	!------------------------------------------------------------------------------!
	577
	578	USE cpulog
	579	USE indices
	580	USE interfaces
	581	USE pegrid
	582	USE transpose_indices
	583
	584	IMPLICIT NONE
	585
	586	INTEGER :: i, j, k, l, m, ys
	587
	588	REAL :: f_in(1:nza,nys:nyna,nxl:nxra), f_inv(nys:nyna,nxl:nxra,1:nza), &
	589	f_out(0:nya,nxl_yd:nxr_yda,nzb_yd:nzt_yda), &
[164]	590	work(nnxnnynnz)
[1]	591
	592	#if defined( __parallel )
	593
	594	!
	595	!-- Rearrange indices of input array in order to make data to be send
	596	!-- by MPI contiguous
	597	DO i = nxl, nxra
	598	DO j = nys, nyna
	599	DO k = 1, nza
[164]	600	f_inv(j,i,k) = f_in(k,j,i)
[1]	601	ENDDO
	602	ENDDO
	603	ENDDO
	604
	605	!
	606	!-- Move data to different array, because memory location of work1 is
	607	!-- needed further below (work1 = work2).
	608	!-- If the PE grid is one-dimensional along x, only local reordering
	609	!-- of the data is necessary and no transposition has to be done.
	610	IF ( pdims(2) == 1 ) THEN
	611	DO k = 1, nza
	612	DO i = nxl, nxra
	613	DO j = nys, nyna
[164]	614	f_out(j,i,k) = f_inv(j,i,k)
[1]	615	ENDDO
	616	ENDDO
	617	ENDDO
	618	RETURN
	619	ENDIF
	620
	621	!
	622	!-- Transpose array
	623	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'start' )
	624	CALL MPI_ALLTOALL( f_inv(nys,nxl,1), sendrecvcount_zyd, MPI_REAL, &
[164]	625	work(1), sendrecvcount_zyd, MPI_REAL, &
[1]	626	comm1dy, ierr )
	627	CALL cpu_log( log_point_s(32), 'mpi_alltoall', 'stop' )
	628
	629	!
	630	!-- Reorder transposed array
	631	m = 0
	632	DO l = 0, pdims(2) - 1
	633	ys = 0 + l * nny
	634	DO k = nzb_yd, nzt_yda
	635	DO i = nxl_yd, nxr_yda
	636	DO j = ys, ys + nny - 1
	637	m = m + 1
[164]	638	f_out(j,i,k) = work(m)
[1]	639	ENDDO
	640	ENDDO
	641	ENDDO
	642	ENDDO
	643
	644	#endif
	645
	646	END SUBROUTINE transpose_zyd

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |