Home

Context Navigation

source: palm/trunk/SOURCE/synthetic_turbulence_generator_mod.f90 @ 2750

Last change on this file since 2750 was 2716, checked in by kanani, 7 years ago
Correction of "Former revisions" section
Property svn:keywords set to `Id`
File size: 35.6 KB

Line
1	!> @synthetic_turbulence_generator_mod.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 2017 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: synthetic_turbulence_generator_mod.f90 2716 2017-12-29 16:35:59Z knoop $
27	! Corrected "Former revisions" section
28	!
29	! 2696 2017-12-14 17:12:51Z kanani
30	! Change in file header (GPL part)
31	!
32	! 2669 2017-12-06 16:03:27Z raasch
33	! unit number for file containing turbulence generator data changed to 90
34	! bugfix: preprocessor directives added for MPI specific code
35	!
36	! 2576 2017-10-24 13:49:46Z Giersch
37	! Definition of a new function called stg_skip_var_list to skip module
38	! parameters during reading restart data
39	!
40	! 2563 2017-10-19 15:36:10Z Giersch
41	! stg_read_restart_data is called in stg_parin in the case of a restart run
42	!
43	! 2259 2017-06-08 09:09:11Z gronemeier
44	! Initial revision
45	!
46	!
47	!
48	! Authors:
49	! --------
50	! @author Tobias Gronemeier, Atsushi Inagaki, Micha Gryschka, Christoph Knigge
51	!
52	!
53	! Description:
54	! ------------
55	!> The module generates turbulence at the inflow boundary based on a method by
56	!> Xie and Castro (2008) utilizing a Lund rotation (Lund, 1998) and a mass-flux
57	!> correction by Kim et al. (2013).
58	!> The turbulence is correlated based on length scales in y- and z-direction and
59	!> a time scale for each velocity component. The profiles of length and time
60	!> scales, mean u, v, w, e and pt, and all components of the Reynolds stress
61	!> tensor are read from file STG_PROFILES.
62	!>
63	!> @todo test restart
64	!> enable cyclic_fill
65	!> implement turbulence generation for e and pt
66	!> @note <Enter notes on the module>
67	!> @bug Height information from input file is not used. Profiles from input
68	!> must match with current PALM grid.
69	!> Transformation of length scales to number of gridpoints does not
70	!> consider grid stretching.
71	!> In case of restart, velocity seeds differ from precursor run if a11,
72	!> a22, or a33 are zero.
73	!------------------------------------------------------------------------------!
74	MODULE synthetic_turbulence_generator_mod
75
76
77	USE arrays_3d, &
78	ONLY: mean_inflow_profiles, u, v, w
79
80	USE constants, &
81	ONLY: pi
82
83	USE control_parameters, &
84	ONLY: initializing_actions, message_string, &
85	synthetic_turbulence_generator
86
87	USE cpulog, &
88	ONLY: cpu_log, log_point, log_point_s
89
90	USE indices, &
91	ONLY: nbgp, nzb, nzt, nyng, nysg
92
93	USE kinds
94
95	USE MPI
96
97	USE pegrid, &
98	ONLY: comm1dx, comm1dy, comm2d, id_inflow, ierr, myidx, pdims
99
100	USE transpose_indices, &
101	ONLY: nzb_x, nzt_x
102
103
104	IMPLICIT NONE
105
106	LOGICAL :: velocity_seed_initialized = .FALSE. !< true after first call of stg_main
107	LOGICAL :: use_synthetic_turbulence_generator = .FALSE. !< switch to use synthetic turbulence generator
108
109	INTEGER(iwp) :: stg_type_yz !< MPI type for full z range
110	INTEGER(iwp) :: stg_type_yz_small !< MPI type for small z range
111	INTEGER(iwp) :: merg !< maximum length scale (in gp)
112	INTEGER(iwp) :: mergp !< merg + nbgp
113
114	REAL(wp) :: mc_factor !< mass flux correction factor
115
116	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displs !< displacement for MPI_GATHERV
117	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: recv_count !< receive count for MPI_GATHERV
118	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nuy !< length scale of u in y direction (in gp)
119	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nuz !< length scale of u in z direction (in gp)
120	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nvy !< length scale of v in y direction (in gp)
121	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nvz !< length scale of v in z direction (in gp)
122	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nwy !< length scale of w in y direction (in gp)
123	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nwz !< length scale of w in z direction (in gp)
124
125	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: seed !< seed of random number for rn-generator
126
127	REAL(wp), DIMENSION(:), ALLOCATABLE :: a11 !< coefficient for Lund rotation
128	REAL(wp), DIMENSION(:), ALLOCATABLE :: a21 !< coefficient for Lund rotation
129	REAL(wp), DIMENSION(:), ALLOCATABLE :: a22 !< coefficient for Lund rotation
130	REAL(wp), DIMENSION(:), ALLOCATABLE :: a31 !< coefficient for Lund rotation
131	REAL(wp), DIMENSION(:), ALLOCATABLE :: a32 !< coefficient for Lund rotation
132	REAL(wp), DIMENSION(:), ALLOCATABLE :: a33 !< coefficient for Lund rotation
133	REAL(wp), DIMENSION(:), ALLOCATABLE :: tu !< Lagrangian time scale of u
134	REAL(wp), DIMENSION(:), ALLOCATABLE :: tv !< Lagrangian time scale of v
135	REAL(wp), DIMENSION(:), ALLOCATABLE :: tw !< Lagrangian time scale of w
136
137	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: buy !< filter function for u in y direction
138	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: buz !< filter function for u in z direction
139	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bvy !< filter function for v in y direction
140	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bvz !< filter function for v in z direction
141	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bwy !< filter function for w in y direction
142	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bwz !< filter function for w in z direction
143	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fu !< velocity seed for u
144	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fuo !< velocity seed for u with new random number
145	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fv !< velocity seed for v
146	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fvo !< velocity seed for v with new random number
147	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fw !< velocity seed for w
148	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fwo !< velocity seed for w with new random number
149
150
151	!
152	!-- PALM interfaces:
153	!-- Input parameter checks to be done in check_parameters
154	INTERFACE stg_check_parameters
155	MODULE PROCEDURE stg_check_parameters
156	END INTERFACE stg_check_parameters
157
158	!
159	!-- Calculate filter functions
160	INTERFACE stg_filter_func
161	MODULE PROCEDURE stg_filter_func
162	END INTERFACE stg_filter_func
163
164	!
165	!-- Generate velocity seeds
166	INTERFACE stg_generate_seed_yz
167	MODULE PROCEDURE stg_generate_seed_yz
168	END INTERFACE stg_generate_seed_yz
169
170	!
171	!-- Output of information to the header file
172	INTERFACE stg_header
173	MODULE PROCEDURE stg_header
174	END INTERFACE stg_header
175
176	!
177	!-- Initialization actions
178	INTERFACE stg_init
179	MODULE PROCEDURE stg_init
180	END INTERFACE stg_init
181
182	!
183	!-- Main procedure of synth. turb. gen.
184	INTERFACE stg_main
185	MODULE PROCEDURE stg_main
186	END INTERFACE stg_main
187
188	!
189	!-- Reading of NAMELIST parameters
190	INTERFACE stg_parin
191	MODULE PROCEDURE stg_parin
192	END INTERFACE stg_parin
193
194	!
195	!-- Skipping of parameters for restart runs
196	INTERFACE stg_skip_var_list
197	MODULE PROCEDURE stg_skip_var_list
198	END INTERFACE stg_skip_var_list
199
200	!
201	!-- Reading of parameters for restart runs
202	INTERFACE stg_read_restart_data
203	MODULE PROCEDURE stg_read_restart_data
204	END INTERFACE stg_read_restart_data
205
206	!
207	!-- Writing of binary output for restart runs
208	INTERFACE stg_write_restart_data
209	MODULE PROCEDURE stg_write_restart_data
210	END INTERFACE stg_write_restart_data
211
212	SAVE
213
214	PRIVATE
215
216	!
217	!-- Public interfaces
218	PUBLIC stg_check_parameters, stg_header, stg_init, stg_main, stg_parin, &
219	stg_write_restart_data, stg_skip_var_list
220
221	!
222	!-- Public variables
223	PUBLIC use_synthetic_turbulence_generator
224
225
226	CONTAINS
227
228
229	!------------------------------------------------------------------------------!
230	! Description:
231	! ------------
232	!> Check parameters routine for synthetic turbulence generator
233	!------------------------------------------------------------------------------!
234	SUBROUTINE stg_check_parameters
235
236
237	USE control_parameters, &
238	ONLY: bc_lr, bc_ns, turbulent_inflow
239
240
241	IMPLICIT NONE
242
243	IF ( use_synthetic_turbulence_generator ) THEN
244
245	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) == 0 .AND. &
246	INDEX( initializing_actions, 'read_restart_data' ) == 0 ) THEN
247	message_string = 'Using synthetic turbulence generator ' // &
248	'requires &initializing_actions = ' // &
249	'"set_constant_profiles" or "read_restart_data"'
250	CALL message( 'stg_check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
251	ENDIF
252
253	IF ( bc_lr /= 'dirichlet/radiation' ) THEN
254	message_string = 'Using synthetic turbulence generator ' // &
255	'requires &bc_lr = "dirichlet/radiation"'
256	CALL message( 'stg_check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
257	ENDIF
258	IF ( bc_ns /= 'cyclic' ) THEN
259	message_string = 'Using synthetic turbulence generator ' // &
260	'requires &bc_ns = "cyclic"'
261	CALL message( 'stg_check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
262	ENDIF
263	IF ( turbulent_inflow ) THEN
264	message_string = 'Using synthetic turbulence generator ' // &
265	'in combination &with turbulent_inflow = .T. ' // &
266	'is not allowed'
267	CALL message( 'stg_check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
268	ENDIF
269
270	ENDIF
271
272	END SUBROUTINE stg_check_parameters
273
274
275	!------------------------------------------------------------------------------!
276	! Description:
277	! ------------
278	!> Header output for synthetic turbulence generator
279	!------------------------------------------------------------------------------!
280	SUBROUTINE stg_header ( io )
281
282
283	IMPLICIT NONE
284
285	INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file
286
287	!
288	!-- Write synthetic turbulence generator Header
289	WRITE( io, 1 )
290	IF ( use_synthetic_turbulence_generator ) THEN
291	WRITE( io, 2 )
292	ELSE
293	WRITE( io, 3 )
294	ENDIF
295
296	1 FORMAT (//' Synthetic turbulence generator information:'/ &
297	' ------------------------------------------'/)
298	2 FORMAT (' synthetic turbulence generator switched on')
299	3 FORMAT (' synthetic turbulence generator switched off')
300
301	END SUBROUTINE stg_header
302
303
304	!------------------------------------------------------------------------------!
305	! Description:
306	! ------------
307	!> Initialization of the synthetic turbulence generator
308	!------------------------------------------------------------------------------!
309	SUBROUTINE stg_init
310
311
312	USE arrays_3d, &
313	ONLY: u_init, v_init
314
315	USE control_parameters, &
316	ONLY: coupling_char, dz, e_init
317
318	USE grid_variables, &
319	ONLY: ddy
320
321
322	IMPLICIT NONE
323
324	#if defined( __parallel )
325	INTEGER(KIND=MPI_ADDRESS_KIND) :: extent !< extent of new MPI type
326	INTEGER(KIND=MPI_ADDRESS_KIND) :: tob=0 !< dummy variable
327	#endif
328
329	INTEGER(iwp) :: j !> loop index
330	INTEGER(iwp) :: k !< index
331	INTEGER(iwp) :: newtype !< dummy MPI type
332	INTEGER(iwp) :: realsize !< size of REAL variables
333	INTEGER(iwp) :: nseed !< dimension of random number seed
334	INTEGER(iwp) :: startseed = 1234567890 !< start seed for random number generator
335
336	!
337	!-- Dummy variables used for reading profiles
338	REAL(wp) :: d1 !< u profile
339	REAL(wp) :: d2 !< v profile
340	REAL(wp) :: d3 !< w profile
341	REAL(wp) :: d5 !< e profile
342	REAL(wp) :: d11 !< vertical interpolation for a11
343	REAL(wp) :: d21 !< vertical interpolation for a21
344	REAL(wp) :: d22 !< vertical interpolation for a22
345	REAL(wp) :: luy !< length scale for u in y direction
346	REAL(wp) :: luz !< length scale for u in z direction
347	REAL(wp) :: lvy !< length scale for v in y direction
348	REAL(wp) :: lvz !< length scale for v in z direction
349	REAL(wp) :: lwy !< length scale for w in y direction
350	REAL(wp) :: lwz !< length scale for w in z direction
351	REAL(wp) :: zz !< height
352
353	REAL(wp),DIMENSION(nzb:nzt+1) :: r11 !< Reynolds parameter
354	REAL(wp),DIMENSION(nzb:nzt+1) :: r21 !< Reynolds parameter
355	REAL(wp),DIMENSION(nzb:nzt+1) :: r22 !< Reynolds parameter
356	REAL(wp),DIMENSION(nzb:nzt+1) :: r31 !< Reynolds parameter
357	REAL(wp),DIMENSION(nzb:nzt+1) :: r32 !< Reynolds parameter
358	REAL(wp),DIMENSION(nzb:nzt+1) :: r33 !< Reynolds parameter
359
360
361	#if defined( __parallel )
362	CALL MPI_BARRIER( comm2d, ierr )
363	#endif
364
365	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'start' )
366
367	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) &
368	ALLOCATE( mean_inflow_profiles(nzb:nzt+1,5) )
369
370	ALLOCATE ( a11(nzb:nzt+1), a21(nzb:nzt+1), a22(nzb:nzt+1), &
371	a31(nzb:nzt+1), a32(nzb:nzt+1), a33(nzb:nzt+1), &
372	nuy(nzb:nzt+1), nuz(nzb:nzt+1), nvy(nzb:nzt+1), &
373	nvz(nzb:nzt+1), nwy(nzb:nzt+1), nwz(nzb:nzt+1), &
374	tu(nzb:nzt+1), tv(nzb:nzt+1), tw(nzb:nzt+1) )
375
376	#if defined( __parallel )
377	!
378	!-- Define MPI type used in stg_generate_seed_yz to gather vertical splitted
379	!-- velocity seeds
380	CALL MPI_TYPE_SIZE( MPI_REAL, realsize, ierr )
381	extent = 1 * realsize
382
383	! stg_type_yz: yz-slice with vertical bounds nzb:nzt+1
384	CALL MPI_TYPE_CREATE_SUBARRAY( 2, [nzt-nzb+2,nyng-nysg+1], &
385	[1,nyng-nysg+1], [0,0], MPI_ORDER_FORTRAN, MPI_REAL, newtype, ierr )
386	CALL MPI_TYPE_CREATE_RESIZED( newtype, tob, extent, stg_type_yz, ierr )
387	CALL MPI_TYPE_COMMIT( stg_type_yz, ierr )
388	CALL MPI_TYPE_FREE( newtype, ierr )
389
390	! stg_type_yz_small: yz-slice with vertical bounds nzb_x:nzt_x+1
391	CALL MPI_TYPE_CREATE_SUBARRAY( 2, [nzt_x-nzb_x+2,nyng-nysg+1], &
392	[1,nyng-nysg+1], [0,0], MPI_ORDER_FORTRAN, MPI_REAL, newtype, ierr )
393	CALL MPI_TYPE_CREATE_RESIZED( newtype, tob, extent, stg_type_yz_small, ierr )
394	CALL MPI_TYPE_COMMIT( stg_type_yz_small, ierr )
395	CALL MPI_TYPE_FREE( newtype, ierr )
396
397	! receive count and displacement for MPI_GATHERV in stg_generate_seed_yz
398	ALLOCATE( recv_count(pdims(1)), displs(pdims(1)) )
399
400	recv_count = nzt_x-nzb_x + 1
401	recv_count(pdims(1)) = recv_count(pdims(1)) + 1
402
403	DO j = 1, pdims(1)
404	displs(j) = 0 + (nzt_x-nzb_x+1) * (j-1)
405	ENDDO
406	#endif
407
408	!
409	!-- Define seed of random number
410	CALL RANDOM_SEED()
411	CALL RANDOM_SEED( size=nseed )
412	ALLOCATE( seed(1:nseed) )
413	DO j = 1, nseed
414	seed(j) = startseed + j
415	ENDDO
416	CALL RANDOM_SEED(put=seed)
417
418	!
419	!-- Read inflow profile
420	!-- Height levels of profiles in input profile is as follows:
421	!-- zu: luy, luz, tu, lvy, lvz, tv, r11, r21, r22, d1, d2, d5
422	!-- zw: lwy, lwz, tw, r31, r32, r33, d3
423	!-- WARNING: zz is not used at the moment
424	OPEN( 90, FILE='STG_PROFILES'//TRIM( coupling_char ), STATUS='OLD', &
425	FORM='FORMATTED')
426
427	! Skip header
428	READ( 90, * )
429
430	DO k = nzb, nzt+1
431	READ( 90, * ) zz, luy, luz, tu(k), lvy, lvz, tv(k), lwy, lwz, tw(k), &
432	r11(k), r21(k), r22(k), r31(k), r32(k), r33(k), &
433	d1, d2, d3, d5
434
435	!
436	!-- Convert length scales from meter to number of grid points
437	nuy(k) = INT( luy * ddy )
438	nuz(k) = INT( luz / dz )
439	nvy(k) = INT( lvy * ddy )
440	nvz(k) = INT( lvz / dz )
441	nwy(k) = INT( lwy * ddy )
442	nwz(k) = INT( lwz / dz )
443
444	!
445	!-- Save Mean inflow profiles
446	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
447	mean_inflow_profiles(k,1) = d1
448	mean_inflow_profiles(k,2) = d2
449	! mean_inflow_profiles(k,4) = d4
450	mean_inflow_profiles(k,5) = d5
451	ENDIF
452	ENDDO
453
454	CLOSE( 90 )
455
456	!
457	!-- Assign initial profiles
458	u_init = mean_inflow_profiles(:,1)
459	v_init = mean_inflow_profiles(:,2)
460	! pt_init = mean_inflow_profiles(:,4)
461	e_init = MAXVAL( mean_inflow_profiles(:,5) )
462
463	!
464	!-- Calculate coefficient matrix from Reynolds stress tensor (Lund rotation)
465	DO k = nzb, nzt+1
466	IF ( r11(k) > 0.0_wp ) THEN
467	a11(k) = SQRT( r11(k) )
468	a21(k) = r21(k) / a11(k)
469	ELSE
470	a11(k) = 0.0_wp
471	a21(k) = 0.0_wp
472	ENDIF
473
474	a22(k) = r22(k) - a21(k)**2
475	IF ( a22(k) > 0.0_wp ) THEN
476	a22(k) = SQRT( a22(k) )
477	a32(k) = ( r32(k) - a21(k) * a31(k) ) / a22(k)
478	ELSE
479	a22(k) = 0.0_wp
480	a32(k) = 0.0_wp
481	ENDIF
482
483	!
484	!-- a31, a32, a33 must be calculated with interpolated a11, a21, a22 (d11,
485	!-- d21, d22) because of different vertical grid
486	IF ( k .le. nzt ) THEN
487	d11 = 0.5_wp * ( r11(k) + r11(k+1) )
488	IF ( d11 > 0.0_wp ) THEN
489	d11 = SQRT( d11 )
490	d21 = ( 0.5_wp * ( r21(k) + r21(k+1) ) ) / d11
491	a31(k) = r31(k) / d11
492	ELSE
493	d21 = 0.0_wp
494	a31(k) = 0.0_wp
495	ENDIF
496
497	d22 = 0.5_wp * ( r22(k) + r22(k+1) ) - d21 ** 2
498	IF ( d22 > 0.0_wp ) THEN
499	a32(k) = ( r32(k) - d21 * a31(k) ) / SQRT( d22 )
500	ELSE
501	a32(k) = 0.0_wp
502	ENDIF
503
504	a33(k) = r33(k) - a31(k) 2 - a32(k) 2
505	IF ( a33(k) > 0.0_wp ) THEN
506	a33(k) = SQRT( a33(k) )
507	ELSE
508	a33(k) = 0.0_wp
509	ENDIF
510	ELSE
511	a31(k) = a31(k-1)
512	a32(k) = a32(k-1)
513	a33(k) = a33(k-1)
514	ENDIF
515
516	ENDDO
517
518	!
519	!-- Define the size of the filter functions and allocate them.
520	merg = 0
521
522	! arrays must be large enough to cover the largest length scale
523	DO k = nzb, nzt+1
524	j = MAX( ABS(nuy(k)), ABS(nuz(k)), &
525	ABS(nvy(k)), ABS(nvz(k)), &
526	ABS(nwy(k)), ABS(nwz(k)) )
527	IF ( j > merg ) merg = j
528	ENDDO
529
530	merg = 2 * merg
531	mergp = merg + nbgp
532
533	ALLOCATE ( buy(-merg:merg,nzb:nzt+1), buz(-merg:merg,nzb:nzt+1), &
534	bvy(-merg:merg,nzb:nzt+1), bvz(-merg:merg,nzb:nzt+1), &
535	bwy(-merg:merg,nzb:nzt+1), bwz(-merg:merg,nzb:nzt+1) )
536
537	!
538	!-- Allocate velocity seeds
539	ALLOCATE ( fu( nzb:nzt+1,nysg:nyng), fuo(nzb:nzt+1,nysg:nyng), &
540	fv( nzb:nzt+1,nysg:nyng), fvo(nzb:nzt+1,nysg:nyng), &
541	fw( nzb:nzt+1,nysg:nyng), fwo(nzb:nzt+1,nysg:nyng) )
542
543	fu = 0._wp
544	fuo = 0._wp
545	fv = 0._wp
546	fvo = 0._wp
547	fw = 0._wp
548	fwo = 0._wp
549
550	!
551	!-- Create filter functions
552	CALL stg_filter_func( nuy, buy ) !filter uy
553	CALL stg_filter_func( nuz, buz ) !filter uz
554	CALL stg_filter_func( nvy, bvy ) !filter vy
555	CALL stg_filter_func( nvz, bvz ) !filter vz
556	CALL stg_filter_func( nwy, bwy ) !filter wy
557	CALL stg_filter_func( nwz, bwz ) !filter wz
558
559	#if defined( __parallel )
560	CALL MPI_BARRIER( comm2d, ierr )
561	#endif
562
563	!
564	!-- In case of restart, calculate velocity seeds fu, fv, fw from former
565	! time step.
566	! Bug: fu, fv, fw are different in those heights where a11, a22, a33
567	! are 0 compared to the prerun. This is mostly for k=nzt+1.
568	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
569	IF ( myidx == id_inflow ) THEN
570	DO j = nysg, nyng
571	DO k = nzb, nzt+1
572
573	IF ( a11(k) .NE. 0._wp ) THEN
574	fu(k,j) = ( u(k,j,-1) / mc_factor - &
575	mean_inflow_profiles(k,1) ) / a11(k)
576	ELSE
577	fu(k,j) = 0._wp
578	ENDIF
579
580	IF ( a22(k) .NE. 0._wp ) THEN
581	fv(k,j) = ( v(k,j,-1) / mc_factor - a21(k) * fu(k,j) - &
582	mean_inflow_profiles(k,2) ) / a22(k)
583	ELSE
584	fv(k,j) = 0._wp
585	ENDIF
586
587	IF ( a33(k) .NE. 0._wp ) THEN
588	fw(k,j) = ( w(k,j,-1) / mc_factor - a31(k) * fu(k,j) - &
589	a32(k) * fv(k,j) ) / a33(k)
590	ELSE
591	fw = 0._wp
592	ENDIF
593
594	ENDDO
595	ENDDO
596	ENDIF
597	ENDIF
598
599	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'stop' )
600
601	END SUBROUTINE stg_init
602
603
604	!------------------------------------------------------------------------------!
605	! Description:
606	! ------------
607	!> Calculate filter function bxx from length scale nxx following Eg.9 and 10
608	!> (Xie and Castro, 2008)
609	!------------------------------------------------------------------------------!
610	SUBROUTINE stg_filter_func( nxx, bxx )
611
612
613	IMPLICIT NONE
614
615	INTEGER(iwp) :: k !< loop index
616	INTEGER(iwp) :: n_k !< length scale nXX in height k
617	INTEGER(iwp) :: n_k2 !< n_k * 2
618	INTEGER(iwp) :: nf !< index for length scales
619
620	REAL(wp) :: bdenom !< denominator for filter functions bXX
621	REAL(wp) :: qsi = 1.0_wp !< minimization factor
622
623	INTEGER(iwp), DIMENSION(:) :: nxx(nzb:nzt+1) !< length scale (in gp)
624
625	REAL(wp), DIMENSION(:,:) :: bxx(-merg:merg,nzb:nzt+1) !< filter function
626
627
628	bxx = 0.0_wp
629
630	DO k = nzb, nzt+1
631	bdenom = 0.0_wp
632	n_k = nxx(k)
633	IF ( n_k /= 0 ) THEN
634	n_k2 = n_k * 2
635
636	!
637	!-- ( Eq.10 )^2
638	DO nf = -n_k2, n_k2
639	bdenom = bdenom + EXP( -qsi * pi * ABS(nf) / n_k )**2
640	ENDDO
641
642	!
643	!-- ( Eq.9 )
644	bdenom = SQRT( bdenom )
645	DO nf = -n_k2, n_k2
646	bxx(nf,k) = EXP( -qsi * pi * ABS(nf) / n_k ) / bdenom
647	ENDDO
648	ENDIF
649	ENDDO
650
651	END SUBROUTINE stg_filter_func
652
653
654	!------------------------------------------------------------------------------!
655	! Description:
656	! ------------
657	!> Parin for &stg_par for synthetic turbulence generator
658	!------------------------------------------------------------------------------!
659	SUBROUTINE stg_parin
660
661
662	IMPLICIT NONE
663
664	CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file
665
666
667	NAMELIST /stg_par/ use_synthetic_turbulence_generator
668
669	line = ' '
670
671	!
672	!-- Try to find stg package
673	REWIND ( 11 )
674	line = ' '
675	DO WHILE ( INDEX( line, '&stg_par' ) == 0 )
676	READ ( 11, '(A)', END=10 ) line
677	ENDDO
678	BACKSPACE ( 11 )
679
680	!
681	!-- Read namelist
682	READ ( 11, stg_par )
683
684	!
685	!-- Set flag that indicates that the synthetic turbulence generator is switched
686	!-- on
687	synthetic_turbulence_generator = .TRUE.
688
689	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
690	CALL stg_read_restart_data
691	ENDIF
692
693	10 CONTINUE
694
695	END SUBROUTINE stg_parin
696
697
698	!------------------------------------------------------------------------------!
699	! Description:
700	! ------------
701	!> Skipping the stg variables from restart-file (binary format).
702	!------------------------------------------------------------------------------!
703	SUBROUTINE stg_skip_var_list
704
705	IMPLICIT NONE
706
707	CHARACTER (LEN=1) :: cdum
708	CHARACTER (LEN=30) :: variable_chr
709
710	READ ( 13 ) variable_chr
711
712	DO WHILE ( TRIM( variable_chr ) /= '* end stg module *' )
713
714	READ ( 13 ) cdum
715	READ ( 13 ) variable_chr
716
717	ENDDO
718
719	END SUBROUTINE stg_skip_var_list
720
721
722	!------------------------------------------------------------------------------!
723	! Description:
724	! ------------
725	!> This routine reads the respective restart data.
726	!------------------------------------------------------------------------------!
727	SUBROUTINE stg_read_restart_data
728
729
730	IMPLICIT NONE
731
732	CHARACTER (LEN=30) :: variable_chr !< dummy variable to read string
733
734
735	READ ( 13 ) variable_chr
736	DO WHILE ( TRIM( variable_chr ) /= '* end stg module *' )
737
738	SELECT CASE ( TRIM( variable_chr ) )
739
740	CASE ( 'use_synthetic_turbulence_generator ' )
741	READ ( 13 ) use_synthetic_turbulence_generator
742	CASE ( 'mc_factor' )
743	READ ( 13 ) mc_factor
744
745	END SELECT
746
747	READ ( 13 ) variable_chr
748
749	ENDDO
750
751	END SUBROUTINE stg_read_restart_data
752
753
754	!------------------------------------------------------------------------------!
755	! Description:
756	! ------------
757	!> This routine writes the respective restart data.
758	!------------------------------------------------------------------------------!
759	SUBROUTINE stg_write_restart_data
760
761
762	IMPLICIT NONE
763
764	WRITE ( 14 ) 'use_synthetic_turbulence_generator '
765	WRITE ( 14 ) use_synthetic_turbulence_generator
766	WRITE ( 14 ) 'mc_factor '
767	WRITE ( 14 ) mc_factor
768
769	WRITE ( 14 ) '* end stg module * '
770
771	END SUBROUTINE stg_write_restart_data
772
773
774	!------------------------------------------------------------------------------!
775	! Description:
776	! ------------
777	!> Create turbulent inflow fields for u, v, w with prescribed length scales and
778	!> Reynolds stress tensor after a method of Xie and Castro (2008), modified
779	!> following suggestions of Kim et al. (2013), and using a Lund rotation
780	!> (Lund, 1998).
781	!------------------------------------------------------------------------------!
782	SUBROUTINE stg_main
783
784
785	USE arrays_3d, &
786	ONLY: dzw
787
788	USE control_parameters, &
789	ONLY: dt_3d, intermediate_timestep_count, simulated_time, &
790	volume_flow_initial
791
792	USE indices, &
793	ONLY: nyn, nys
794
795	USE statistics, &
796	ONLY: weight_substep
797
798
799	IMPLICIT NONE
800
801	INTEGER(iwp) :: j !< loop index in y-direction
802	INTEGER(iwp) :: k !< loop index in z-direction
803
804	REAL(wp) :: dt_stg !< wheighted subtimestep
805	REAL(wp) :: mc_factor_l !< local mass flux correction factor
806
807	REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng,5,nbgp) :: inflow_dist !< disturbance for inflow profiles
808
809
810	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'start' )
811
812	!
813	!-- Calculate time step which is needed for filter functions
814	dt_stg = dt_3d * weight_substep(intermediate_timestep_count)
815
816	!
817	!-- Initial value of fu, fv, fw
818	IF ( simulated_time == 0.0_wp .AND. .NOT. velocity_seed_initialized ) THEN
819	CALL stg_generate_seed_yz( nuy, nuz, buy, buz, fu )
820	CALL stg_generate_seed_yz( nvy, nvz, bvy, bvz, fv )
821	CALL stg_generate_seed_yz( nwy, nwz, bwy, bwz, fw )
822	velocity_seed_initialized = .TRUE.
823	ENDIF
824	!
825	!-- New set of fu, fv, fw
826	CALL stg_generate_seed_yz( nuy, nuz, buy, buz, fuo )
827	CALL stg_generate_seed_yz( nvy, nvz, bvy, bvz, fvo )
828	CALL stg_generate_seed_yz( nwy, nwz, bwy, bwz, fwo )
829
830	IF ( myidx == id_inflow ) THEN
831
832	DO j = nysg, nyng
833	DO k = nzb, nzt + 1
834	!
835	!-- Update fu, fv, fw following Eq. 14 of Xie and Castro (2008)
836	IF ( tu(k) == 0.0_wp ) THEN
837	fu(k,j) = fuo(k,j)
838	ELSE
839	fu(k,j) = fu(k,j) * EXP( -pi * dt_stg * 0.5_wp / tu(k) ) + &
840	fuo(k,j) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tu(k) ) )
841	ENDIF
842
843	IF ( tv(k) == 0.0_wp ) THEN
844	fv(k,j) = fvo(k,j)
845	ELSE
846	fv(k,j) = fv(k,j) * EXP( -pi * dt_stg * 0.5_wp / tv(k) ) + &
847	fvo(k,j) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tv(k) ) )
848	ENDIF
849
850	IF ( tw(k) == 0.0_wp ) THEN
851	fw(k,j) = fwo(k,j)
852	ELSE
853	fw(k,j) = fw(k,j) * EXP( -pi * dt_stg * 0.5_wp / tw(k) ) + &
854	fwo(k,j) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tw(k) ) )
855	ENDIF
856	!
857	!-- Lund rotation following Eq. 17 in Xie and Castro (2008).
858	!-- Additional factors are added to improve the variance of v and w
859	IF( k == 0 ) THEN
860	inflow_dist(k,j,1,1) = 0.0_wp
861	inflow_dist(k,j,2,1) = 0.0_wp
862	inflow_dist(k,j,3,1) = 0.0_wp
863	inflow_dist(k,j,4,1) = 0.0_wp
864	inflow_dist(k,j,5,1) = 0.0_wp
865	ELSE
866	inflow_dist(k,j,1,1) = a11(k) * fu(k,j)
867	!experimental test of 1.2
868	inflow_dist(k,j,2,1) = ( SQRT( a22(k) / MAXVAL(a22) ) &
869	* 1.2_wp ) &
870	* ( a21(k) * fu(k,j) &
871	+ a22(k) * fv(k,j) )
872	inflow_dist(k,j,3,1) = ( SQRT(a33(k) / MAXVAL(a33) ) &
873	* 1.3_wp ) &
874	* ( a31(k) * fu(k,j) &
875	+ a32(k) * fv(k,j) &
876	+ a33(k) * fw(k,j) )
877	! Calculation for pt and e not yet implemented
878	inflow_dist(k,j,4,1) = 0.0_wp
879	inflow_dist(k,j,5,1) = 0.0_wp
880	ENDIF
881
882	ENDDO
883	ENDDO
884
885	!
886	!-- Mass flux correction following Kim et al. (2013)
887	!-- This correction factor insures that the mass flux is preserved at the
888	!-- inflow boundary
889	mc_factor_l = 0.0_wp
890	mc_factor = 0.0_wp
891	DO j = nys, nyn
892	DO k = nzb+1, nzt
893	mc_factor_l = mc_factor_l + dzw(k) * &
894	( mean_inflow_profiles(k,1) + inflow_dist(k,j,1,1) )
895	ENDDO
896	ENDDO
897
898	#if defined( __parallel )
899	CALL MPI_ALLREDUCE( mc_factor_l, mc_factor, &
900	1, MPI_REAL, MPI_SUM, comm1dy, ierr )
901	#else
902	mc_factor = mc_factor_l
903	#endif
904
905	mc_factor = volume_flow_initial(1) / mc_factor
906
907	!
908	!-- Add disturbance at the inflow
909	DO j = nysg, nyng
910	DO k = nzb, nzt+1
911	u(k,j,-nbgp+1:0) = ( mean_inflow_profiles(k,1) + &
912	inflow_dist(k,j,1,1) ) * mc_factor
913	v(k,j,-nbgp:-1) = ( mean_inflow_profiles(k,2) + &
914	inflow_dist(k,j,2,1) ) * mc_factor
915	w(k,j,-nbgp:-1) = inflow_dist(k,j,3,1) * mc_factor
916	ENDDO
917	ENDDO
918
919	ENDIF
920
921	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'stop' )
922
923	END SUBROUTINE stg_main
924
925
926	!------------------------------------------------------------------------------!
927	! Description:
928	! ------------
929	!> Generate a set of random number rand_it wich is equal on each PE
930	!> and calculate the velocity seed f_n.
931	!> f_n is splitted in vertical direction by the number of PEs in x-direction and
932	!> and each PE calculates a vertical subsection of f_n. At the the end, all
933	!> parts are collected to form the full array.
934	!------------------------------------------------------------------------------!
935	SUBROUTINE stg_generate_seed_yz( n_y, n_z, b_y, b_z, f_n )
936
937
938	USE indices, &
939	ONLY: ny
940
941
942	IMPLICIT NONE
943
944	INTEGER(iwp) :: j !< loop index in y-direction
945	INTEGER(iwp) :: jj !< loop index in y-direction
946	INTEGER(iwp) :: k !< loop index in z-direction
947	INTEGER(iwp) :: kk !< loop index in z-direction
948	INTEGER(iwp) :: send_count !< send count for MPI_GATHERV
949
950	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_y !< length scale in y-direction
951	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_z !< length scale in z-direction
952	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_y2 !< n_y*2
953	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_z2 !< n_z*2
954
955	REAL(wp) :: nyz_inv !< inverse of number of grid points in yz-slice
956	REAL(wp) :: rand_av !< average of random number
957	REAL(wp) :: rand_sigma_inv !< inverse of stdev of random number
958
959	REAL(wp), DIMENSION(-merg:merg,nzb:nzt+1) :: b_y !< filter func in y-dir
960	REAL(wp), DIMENSION(-merg:merg,nzb:nzt+1) :: b_z !< filter func in z-dir
961	REAL(wp), DIMENSION(nzb_x:nzt_x+1,nysg:nyng) :: f_n_l !< local velocity seed
962	REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng) :: f_n !< velocity seed
963	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rand_it !< random number
964
965
966	!
967	!-- Generate random numbers using a seed generated in stg_init.
968	!-- The set of random numbers are modified to have an average of 0 and
969	!-- unit variance.
970	ALLOCATE( rand_it(nzb-mergp:nzt+1+mergp,-mergp:ny+mergp) )
971
972	rand_av = 0.0_wp
973	rand_sigma_inv = 0.0_wp
974	nyz_inv = 1.0_wp / REAL( ( nzt+1 - nzb+1 ) * ( ny+1 ), KIND=wp )
975
976	DO j = 0, ny
977	DO k = nzb, nzt+1
978	CALL RANDOM_NUMBER( rand_it(k,j) )
979	rand_av = rand_av + rand_it(k,j)
980	ENDDO
981	ENDDO
982
983	rand_av = rand_av * nyz_inv
984
985	DO j = 0, ny
986	DO k = nzb, nzt+1
987	rand_it(k,j) = rand_it(k,j) - rand_av
988	rand_sigma_inv = rand_sigma_inv + rand_it(k,j) ** 2
989	ENDDO
990	ENDDO
991
992	rand_sigma_inv = 1.0_wp / SQRT(rand_sigma_inv * nyz_inv)
993
994	DO j = 0, ny
995	DO k = nzb, nzt+1
996	rand_it(k,j) = rand_it(k,j) * rand_sigma_inv
997	ENDDO
998	ENDDO
999
1000	!
1001	!-- Periodic fill of random number in space
1002	DO j = 0, ny
1003	DO k = 1, mergp
1004	rand_it(nzb -k,j) = rand_it(nzt+2-k,j) ! bottom margin
1005	rand_it(nzt+1+k,j) = rand_it(nzb+k-1,j) ! top margin
1006	ENDDO
1007	ENDDO
1008	DO j = 1, mergp
1009	DO k = nzb-mergp, nzt+1+mergp
1010	rand_it(k, -j) = rand_it(k,ny-j+1) ! south margin
1011	rand_it(k,ny+j) = rand_it(k, j-1) ! north margin
1012	ENDDO
1013	ENDDO
1014
1015	!
1016	!-- Generate velocity seed following Eq.6 of Xie and Castro (2008)
1017	n_y2 = n_y * 2
1018	n_z2 = n_z * 2
1019	f_n_l = 0.0_wp
1020
1021	DO j = nysg, nyng
1022	DO k = nzb_x, nzt_x+1
1023	DO jj = -n_y2(k), n_y2(k)
1024	DO kk = -n_z2(k), n_z2(k)
1025	f_n_l(k,j) = f_n_l(k,j) &
1026	+ b_y(jj,k) * b_z(kk,k) * rand_it(k+kk,j+jj)
1027	ENDDO
1028	ENDDO
1029	ENDDO
1030	ENDDO
1031
1032	DEALLOCATE( rand_it )
1033
1034	!
1035	!-- Gather velocity seeds of full subdomain
1036	send_count = nzt_x - nzb_x + 1
1037	IF ( nzt_x == nzt ) send_count = send_count + 1
1038
1039	#if defined( __parallel )
1040	CALL MPI_GATHERV( f_n_l(nzb_x,nysg), send_count, stg_type_yz_small, &
1041	f_n(nzb+1,nysg), recv_count, displs, stg_type_yz, &
1042	id_inflow, comm1dx, ierr )
1043	#else
1044	f_n(nzb+1:nzt+1,nysg:nyng) = f_n_l(nzb_x:nzt_x+1,nysg:nyng)
1045	#endif
1046
1047
1048	END SUBROUTINE stg_generate_seed_yz
1049
1050	END MODULE synthetic_turbulence_generator_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |