Home

Context Navigation

source: palm/trunk/SOURCE/synthetic_turbulence_generator_mod.f90 @ 3712

Last change on this file since 3712 was 3646, checked in by kanani, 6 years ago
Bugfix: replace simulated_time by time_since_reference_point where required
Property svn:keywords set to `Id`
File size: 83.1 KB

Rev	Line
[2259]	1	!> @synthetic_turbulence_generator_mod.f90
	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[2259]	4	!
[2696]	5	! PALM is free software: you can redistribute it and/or modify it under the
[2259]	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
	9	!
[2696]	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
[2259]	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 2017 Leibniz Universitaet Hannover
	18	!------------------------------------------------------------------------------!
	19	!
	20	! Current revisions:
	21	! -----------------
	22	!
[3349]	23	!
[2259]	24	! Former revisions:
	25	! -----------------
	26	! $Id: synthetic_turbulence_generator_mod.f90 3646 2018-12-28 17:58:49Z kanani $
[3646]	27	! Bugfix: use time_since_reference_point instead of simulated_time (relevant
	28	! when using wall/soil spinup)
	29	!
	30	! 3579 2018-11-29 15:32:39Z suehring
[3579]	31	! - Bugfix in calculation of turbulence scaling parameters for turbulence
	32	! generator in case of topography
	33	! - Additional checks implemented - no STG in RANS-RANS nesting or LES-LES
	34	! nesting
	35	!
	36	! 3376 2018-10-19 10:15:32Z suehring
[3376]	37	! Error messages and numbers reivsed.
	38	!
	39	! 3349 2018-10-15 16:39:41Z suehring
[3349]	40	! Fix for format descriptor
	41	!
	42	! 3348 2018-10-15 14:30:51Z suehring
[3347]	43	! - Revise structure of init routine
	44	! - introduce new parameters to skip STG for some timesteps
	45	! - introduce time-dependent parametrization of Reynolds-stress tensor
	46	! - Bugfix in allocation of mean_inflow_profiles
	47	!
	48	! 3341 2018-10-15 10:31:27Z suehring
[3289]	49	! Introduce module parameter for number of inflow profiles
	50	!
	51	! 3288 2018-09-28 10:23:08Z suehring
[3274]	52	! Modularization of all bulk cloud physics code components
	53	!
	54	! 3248 2018-09-14 09:42:06Z sward
[3248]	55	! Minor formating changes
	56	!
	57	! 3246 2018-09-13 15:14:50Z sward
[3246]	58	! Added error handling for input namelist via parin_fail_message
	59	!
	60	! 3241 2018-09-12 15:02:00Z raasch
[3241]	61	! unused variables removed
	62	!
	63	! 3186 2018-07-30 17:07:14Z suehring
[3186]	64	! Mask topography while imposing inflow perturbations at the boundaries; do not
	65	! impose perturbations at top boundary as well as ghost points
	66	!
	67	! 3183 2018-07-27 14:25:55Z suehring
[3183]	68	! Rename variables and extend error message
	69	! Enable geneartor also for stretched grids
	70	!
	71	! 3182 2018-07-27 13:36:03Z suehring
[3065]	72	! Error message related to vertical stretching has been added, dz was replaced
	73	! by dz(1)
	74	!
	75	! 3051 2018-05-30 17:43:55Z suehring
[3051]	76	! Bugfix in calculation of initial Reynolds-stress tensor.
[3049]	77	!
	78	! 3045 2018-05-28 07:55:41Z Giersch
[3051]	79	! Error messages revised
[3045]	80	!
	81	! 3044 2018-05-25 10:59:41Z gronemeier
[3044]	82	! Add missing variable descriptions
	83	!
	84	! 3038 2018-05-24 10:54:00Z gronemeier
[3038]	85	! updated variable descriptions
	86	!
	87	! 2967 2018-04-13 11:22:08Z raasch
[2967]	88	! bugfix: missing parallel cpp-directives added
[3038]	89	!
[2967]	90	! 2946 2018-04-04 17:01:23Z suehring
[2946]	91	! Remove unused module load
[3038]	92	!
[2946]	93	! 2945 2018-04-04 16:27:14Z suehring
[3038]	94	! - Bugfix in parallelization of synthetic turbulence generator in case the
	95	! z-dimension is not an integral divisor of the number of processors along
[2945]	96	! the x- and y-dimension
[3038]	97	! - Revision in control mimic in case of RAN-LES nesting
	98	!
[2945]	99	! 2938 2018-03-27 15:52:42Z suehring
[3038]	100	! Apply turbulence generator at all non-cyclic lateral boundaries in case of
	101	! realistic Inifor large-scale forcing or RANS-LES nesting
	102	!
[2938]	103	! 2936 2018-03-27 14:49:27Z suehring
[3038]	104	! variable named found has been introduced for checking if restart data was found,
	105	! reading of restart strings has been moved completely to read_restart_data_mod,
	106	! redundant skipping function has been removed, stg_read/write_restart_data
	107	! have been renamed to stg_r/wrd_global, stg_rrd_global is called in
[2894]	108	! read_restart_data_mod now, flag syn_turb_gen_prerun and marker *** end stg
[3038]	109	! *** have been removed (Giersch), strings and their respective lengths are
	110	! written out and read now in case of restart runs to get rid of prescribed
	111	! character lengths (Giersch), CASE DEFAULT was added if restart data is read
	112	!
[2894]	113	! 2841 2018-02-27 15:02:57Z suehring
[2841]	114	! Bugfix: wrong placement of include 'mpif.h' corrected
[3038]	115	!
[2841]	116	! 2836 2018-02-26 13:40:05Z Giersch
[3038]	117	! The variables synthetic_turbulence_generator and
[2836]	118	! use_synthetic_turbulence_generator have been abbreviated + syn_turb_gen_prerun
	119	! flag is used to define if module related parameters were outputted as restart
[3038]	120	! data
	121	!
[2776]	122	! 2716 2017-12-29 16:35:59Z kanani
[2716]	123	! Corrected "Former revisions" section
[3038]	124	!
[2716]	125	! 2696 2017-12-14 17:12:51Z kanani
	126	! Change in file header (GPL part)
	127	!
	128	! 2669 2017-12-06 16:03:27Z raasch
[2669]	129	! unit number for file containing turbulence generator data changed to 90
	130	! bugfix: preprocessor directives added for MPI specific code
[3038]	131	!
[2669]	132	! 2576 2017-10-24 13:49:46Z Giersch
[3038]	133	! Definition of a new function called stg_skip_global to skip module
[2576]	134	! parameters during reading restart data
[3038]	135	!
[2576]	136	! 2563 2017-10-19 15:36:10Z Giersch
[2563]	137	! stg_read_restart_data is called in stg_parin in the case of a restart run
[3038]	138	!
[2563]	139	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	140	! Initial revision
	141	!
	142	!
[3038]	143	!
[2259]	144	! Authors:
	145	! --------
[3347]	146	! @author Tobias Gronemeier, Matthias Suehring, Atsushi Inagaki, Micha Gryschka, Christoph Knigge
	147	!
[2259]	148	!
	149	!
	150	! Description:
	151	! ------------
	152	!> The module generates turbulence at the inflow boundary based on a method by
	153	!> Xie and Castro (2008) utilizing a Lund rotation (Lund, 1998) and a mass-flux
	154	!> correction by Kim et al. (2013).
	155	!> The turbulence is correlated based on length scales in y- and z-direction and
	156	!> a time scale for each velocity component. The profiles of length and time
	157	!> scales, mean u, v, w, e and pt, and all components of the Reynolds stress
[3347]	158	!> tensor can be either read from file STG_PROFILES, or will be parametrized
	159	!> within the boundary layer.
[2259]	160	!>
	161	!> @todo test restart
	162	!> enable cyclic_fill
	163	!> implement turbulence generation for e and pt
[2945]	164	!> @todo Input of height-constant length scales via namelist
[2259]	165	!> @note <Enter notes on the module>
	166	!> @bug Height information from input file is not used. Profiles from input
	167	!> must match with current PALM grid.
	168	!> In case of restart, velocity seeds differ from precursor run if a11,
	169	!> a22, or a33 are zero.
	170	!------------------------------------------------------------------------------!
	171	MODULE synthetic_turbulence_generator_mod
	172
	173
	174	USE arrays_3d, &
[3347]	175	ONLY: mean_inflow_profiles, q, pt, u, v, w, zu, zw
[2259]	176
[3274]	177	USE basic_constants_and_equations_mod, &
[3347]	178	ONLY: g, kappa, pi
[2259]	179
	180	USE control_parameters, &
[3288]	181	ONLY: initializing_actions, num_mean_inflow_profiles, message_string, &
	182	syn_turb_gen
[2259]	183
	184	USE cpulog, &
[3347]	185	ONLY: cpu_log, log_point
[2259]	186
	187	USE indices, &
[2938]	188	ONLY: nbgp, nzb, nzt, nxl, nxlg, nxr, nxrg, nys, nyn, nyng, nysg
[2259]	189
	190	USE kinds
	191
[2967]	192	#if defined( __parallel ) && !defined( __mpifh )
[2259]	193	USE MPI
[2841]	194	#endif
[2259]	195
[3347]	196	USE nesting_offl_mod, &
	197	ONLY: zi_ribulk
	198
[2259]	199	USE pegrid, &
[2938]	200	ONLY: comm1dx, comm1dy, comm2d, ierr, myidx, myidy, pdims
[2259]	201
	202	USE transpose_indices, &
	203	ONLY: nzb_x, nzt_x
	204
	205
	206	IMPLICIT NONE
	207
[2967]	208	#if defined( __parallel ) && defined( __mpifh )
[2841]	209	INCLUDE "mpif.h"
	210	#endif
	211
[3182]	212
[3347]	213	LOGICAL :: velocity_seed_initialized = .FALSE. !< true after first call of stg_main
	214	LOGICAL :: parametrize_inflow_turbulence = .FALSE. !< flag indicating that inflow turbulence is either read from file (.FALSE.) or if it parametrized
	215	LOGICAL :: use_syn_turb_gen = .FALSE. !< switch to use synthetic turbulence generator
[2259]	216
[3038]	217	INTEGER(iwp) :: id_stg_left !< left lateral boundary core id in case of turbulence generator
	218	INTEGER(iwp) :: id_stg_north !< north lateral boundary core id in case of turbulence generator
	219	INTEGER(iwp) :: id_stg_right !< right lateral boundary core id in case of turbulence generator
	220	INTEGER(iwp) :: id_stg_south !< south lateral boundary core id in case of turbulence generator
[2938]	221	INTEGER(iwp) :: stg_type_xz !< MPI type for full z range
	222	INTEGER(iwp) :: stg_type_xz_small !< MPI type for small z range
	223	INTEGER(iwp) :: stg_type_yz !< MPI type for full z range
	224	INTEGER(iwp) :: stg_type_yz_small !< MPI type for small z range
	225	INTEGER(iwp) :: merg !< maximum length scale (in gp)
	226	INTEGER(iwp) :: mergp !< merg + nbgp
[3038]	227	INTEGER(iwp) :: nzb_x_stg !< lower bound of z coordinate (required for transposing z on PEs along x)
	228	INTEGER(iwp) :: nzt_x_stg !< upper bound of z coordinate (required for transposing z on PEs along x)
	229	INTEGER(iwp) :: nzb_y_stg !< lower bound of z coordinate (required for transposing z on PEs along y)
	230	INTEGER(iwp) :: nzt_y_stg !< upper bound of z coordinate (required for transposing z on PEs along y)
[2259]	231
[3347]	232	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displs_xz !< displacement for MPI_GATHERV
	233	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: recv_count_xz !< receive count for MPI_GATHERV
	234	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displs_yz !< displacement for MPI_GATHERV
	235	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: recv_count_yz !< receive count for MPI_GATHERV
	236	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nux !< length scale of u in x direction (in gp)
	237	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nuy !< length scale of u in y direction (in gp)
	238	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nuz !< length scale of u in z direction (in gp)
	239	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nvx !< length scale of v in x direction (in gp)
	240	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nvy !< length scale of v in y direction (in gp)
	241	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nvz !< length scale of v in z direction (in gp)
	242	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nwx !< length scale of w in x direction (in gp)
	243	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nwy !< length scale of w in y direction (in gp)
	244	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: nwz !< length scale of w in z direction (in gp)
	245	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: seed !< seed of random number for rn-generator
[2259]	246
[3347]	247	REAL(wp) :: cosmo_ref = 10.0_wp !< height of first vertical grid level in mesoscale model, used for calculation of scaling parameters
	248	REAL(wp) :: dt_stg_adjust = 300.0_wp !< time interval for adjusting turbulence statistics
	249	REAL(wp) :: dt_stg_call = 5.0_wp !< time interval for calling synthetic turbulence generator
	250	REAL(wp) :: mc_factor !< mass flux correction factor
	251	REAL(wp) :: scale_l !< scaling parameter used for turbulence parametrization - Obukhov length
	252	REAL(wp) :: scale_us !< scaling parameter used for turbulence parametrization - friction velocity
	253	REAL(wp) :: scale_wm !< scaling parameter used for turbulence parametrization - momentum scale
	254	REAL(wp) :: time_stg_adjust = 0.0_wp !< time counter for adjusting turbulence information
	255	REAL(wp) :: time_stg_call = 0.0_wp !< time counter for calling generator
	256
	257
	258	REAL(wp),DIMENSION(:), ALLOCATABLE :: r11 !< Reynolds parameter
	259	REAL(wp),DIMENSION(:), ALLOCATABLE :: r21 !< Reynolds parameter
	260	REAL(wp),DIMENSION(:), ALLOCATABLE :: r22 !< Reynolds parameter
	261	REAL(wp),DIMENSION(:), ALLOCATABLE :: r31 !< Reynolds parameter
	262	REAL(wp),DIMENSION(:), ALLOCATABLE :: r32 !< Reynolds parameter
	263	REAL(wp),DIMENSION(:), ALLOCATABLE :: r33 !< Reynolds parameter
	264
	265	REAL(wp), DIMENSION(:), ALLOCATABLE :: a11 !< coefficient for Lund rotation
	266	REAL(wp), DIMENSION(:), ALLOCATABLE :: a21 !< coefficient for Lund rotation
	267	REAL(wp), DIMENSION(:), ALLOCATABLE :: a22 !< coefficient for Lund rotation
	268	REAL(wp), DIMENSION(:), ALLOCATABLE :: a31 !< coefficient for Lund rotation
	269	REAL(wp), DIMENSION(:), ALLOCATABLE :: a32 !< coefficient for Lund rotation
	270	REAL(wp), DIMENSION(:), ALLOCATABLE :: a33 !< coefficient for Lund rotation
	271	REAL(wp), DIMENSION(:), ALLOCATABLE :: tu !< Lagrangian time scale of u
	272	REAL(wp), DIMENSION(:), ALLOCATABLE :: tv !< Lagrangian time scale of v
	273	REAL(wp), DIMENSION(:), ALLOCATABLE :: tw !< Lagrangian time scale of w
[2259]	274
[3347]	275	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bux !< filter function for u in x direction
	276	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: buy !< filter function for u in y direction
	277	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: buz !< filter function for u in z direction
	278	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bvx !< filter function for v in x direction
	279	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bvy !< filter function for v in y direction
	280	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bvz !< filter function for v in z direction
	281	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bwx !< filter function for w in y direction
	282	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bwy !< filter function for w in y direction
	283	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: bwz !< filter function for w in z direction
	284	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fu_xz !< velocity seed for u at xz plane
	285	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fuo_xz !< velocity seed for u at xz plane with new random number
	286	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fu_yz !< velocity seed for u at yz plane
	287	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fuo_yz !< velocity seed for u at yz plane with new random number
	288	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fv_xz !< velocity seed for v at xz plane
	289	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fvo_xz !< velocity seed for v at xz plane with new random number
	290	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fv_yz !< velocity seed for v at yz plane
	291	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fvo_yz !< velocity seed for v at yz plane with new random number
	292	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fw_xz !< velocity seed for w at xz plane
	293	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fwo_xz !< velocity seed for w at xz plane with new random number
	294	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fw_yz !< velocity seed for w at yz plane
	295	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: fwo_yz !< velocity seed for w at yz plane with new random number
	296
	297	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: dist_xz !< imposed disturbances at north/south boundary
	298	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: dist_yz !< imposed disturbances at north/south boundary
[2259]	299
	300	!
	301	!-- PALM interfaces:
[3347]	302	!-- Adjust time and lenght scales, Reynolds stress, and filter functions
	303	INTERFACE stg_adjust
	304	MODULE PROCEDURE stg_adjust
	305	END INTERFACE stg_adjust
	306	!
[2259]	307	!-- Input parameter checks to be done in check_parameters
	308	INTERFACE stg_check_parameters
	309	MODULE PROCEDURE stg_check_parameters
	310	END INTERFACE stg_check_parameters
	311
	312	!
	313	!-- Calculate filter functions
	314	INTERFACE stg_filter_func
	315	MODULE PROCEDURE stg_filter_func
	316	END INTERFACE stg_filter_func
	317
	318	!
[2938]	319	!-- Generate velocity seeds at south and north domain boundary
	320	INTERFACE stg_generate_seed_xz
	321	MODULE PROCEDURE stg_generate_seed_xz
	322	END INTERFACE stg_generate_seed_xz
	323	!
	324	!-- Generate velocity seeds at left and/or right domain boundary
[2259]	325	INTERFACE stg_generate_seed_yz
	326	MODULE PROCEDURE stg_generate_seed_yz
	327	END INTERFACE stg_generate_seed_yz
	328
	329	!
	330	!-- Output of information to the header file
	331	INTERFACE stg_header
	332	MODULE PROCEDURE stg_header
	333	END INTERFACE stg_header
	334
	335	!
	336	!-- Initialization actions
	337	INTERFACE stg_init
	338	MODULE PROCEDURE stg_init
	339	END INTERFACE stg_init
	340
	341	!
	342	!-- Main procedure of synth. turb. gen.
	343	INTERFACE stg_main
	344	MODULE PROCEDURE stg_main
	345	END INTERFACE stg_main
	346
	347	!
	348	!-- Reading of NAMELIST parameters
	349	INTERFACE stg_parin
	350	MODULE PROCEDURE stg_parin
	351	END INTERFACE stg_parin
	352
	353	!
	354	!-- Reading of parameters for restart runs
[2894]	355	INTERFACE stg_rrd_global
	356	MODULE PROCEDURE stg_rrd_global
	357	END INTERFACE stg_rrd_global
[2259]	358
	359	!
	360	!-- Writing of binary output for restart runs
[2894]	361	INTERFACE stg_wrd_global
	362	MODULE PROCEDURE stg_wrd_global
	363	END INTERFACE stg_wrd_global
[2259]	364
	365	SAVE
	366
	367	PRIVATE
	368
	369	!
	370	!-- Public interfaces
[3347]	371	PUBLIC stg_adjust, stg_check_parameters, stg_header, stg_init, stg_main, &
	372	stg_parin, stg_rrd_global, stg_wrd_global
[2259]	373
	374	!
	375	!-- Public variables
[3347]	376	PUBLIC dt_stg_call, dt_stg_adjust, id_stg_left, id_stg_north, &
	377	id_stg_right, id_stg_south, parametrize_inflow_turbulence, &
	378	time_stg_adjust, time_stg_call, use_syn_turb_gen
[2259]	379
	380
	381	CONTAINS
	382
	383
	384	!------------------------------------------------------------------------------!
	385	! Description:
	386	! ------------
	387	!> Check parameters routine for synthetic turbulence generator
	388	!------------------------------------------------------------------------------!
	389	SUBROUTINE stg_check_parameters
	390
	391
	392	USE control_parameters, &
[3241]	393	ONLY: bc_lr, bc_ns, child_domain, nesting_offline, rans_mode, &
	394	turbulent_inflow
[2259]	395
[2938]	396	USE pmc_interface, &
	397	ONLY : rans_mode_parent
[2259]	398
[2938]	399
[2259]	400	IMPLICIT NONE
	401
[3182]	402	IF ( .NOT. use_syn_turb_gen .AND. .NOT. rans_mode .AND. &
	403	nesting_offline ) THEN
[3376]	404	message_string = 'Synthetic turbulence generator is required ' // &
	405	'if offline nesting is applied and PALM operates ' // &
	406	'in LES mode.'
	407	CALL message( 'stg_check_parameters', 'PA0520', 0, 0, 0, 6, 0 )
[2938]	408	ENDIF
	409
[3182]	410	IF ( .NOT. use_syn_turb_gen .AND. child_domain &
[2938]	411	.AND. rans_mode_parent .AND. .NOT. rans_mode ) THEN
[3376]	412	message_string = 'Synthetic turbulence generator is required ' // &
[2938]	413	'when nesting is applied and parent operates in ' // &
	414	'RANS-mode but current child in LES mode.'
[3376]	415	CALL message( 'stg_check_parameters', 'PA0524', 1, 2, 0, 6, 0 )
[2938]	416	ENDIF
	417
[2776]	418	IF ( use_syn_turb_gen ) THEN
[2259]	419
[3579]	420	IF ( child_domain .AND. .NOT. rans_mode .AND. &
	421	.NOT. rans_mode_parent ) THEN
	422	message_string = 'Using synthetic turbulence generator ' // &
	423	'is not allowed in LES-LES nesting.'
	424	CALL message( 'stg_check_parameters', 'PA0620', 1, 2, 0, 6, 0 )
	425
	426	ENDIF
	427
	428	IF ( child_domain .AND. rans_mode .AND. &
	429	rans_mode_parent ) THEN
	430	message_string = 'Using synthetic turbulence generator ' // &
	431	'is not allowed in RANS-RANS nesting.'
	432	CALL message( 'stg_check_parameters', 'PA0621', 1, 2, 0, 6, 0 )
	433
	434	ENDIF
	435
[3182]	436	IF ( .NOT. nesting_offline .AND. .NOT. child_domain ) THEN
	437
[2938]	438	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) == 0 &
	439	.AND. INDEX( initializing_actions, 'read_restart_data' ) == 0 ) THEN
	440	message_string = 'Using synthetic turbulence generator ' // &
[3579]	441	'requires %initializing_actions = ' // &
	442	'"set_constant_profiles" or "read_restart_data"' //&
	443	', if not offline nesting is applied.'
[2938]	444	CALL message( 'stg_check_parameters', 'PA0015', 1, 2, 0, 6, 0 )
	445	ENDIF
	446
	447	IF ( bc_lr /= 'dirichlet/radiation' ) THEN
	448	message_string = 'Using synthetic turbulence generator ' // &
[3347]	449	'requires &bc_lr = "dirichlet/radiation", ' // &
	450	'if not offline nesting is applied.'
[2938]	451	CALL message( 'stg_check_parameters', 'PA0035', 1, 2, 0, 6, 0 )
	452	ENDIF
	453	IF ( bc_ns /= 'cyclic' ) THEN
	454	message_string = 'Using synthetic turbulence generator ' // &
[3579]	455	'requires &bc_ns = "cyclic", ' // &
[3347]	456	'if not offline nesting is applied.'
[2938]	457	CALL message( 'stg_check_parameters', 'PA0037', 1, 2, 0, 6, 0 )
	458	ENDIF
	459
[2259]	460	ENDIF
	461
	462	IF ( turbulent_inflow ) THEN
	463	message_string = 'Using synthetic turbulence generator ' // &
[2938]	464	'in combination &with turbulent_inflow = .T. '// &
	465	'is not allowed'
[2259]	466	CALL message( 'stg_check_parameters', 'PA0039', 1, 2, 0, 6, 0 )
	467	ENDIF
	468
	469	ENDIF
	470
	471	END SUBROUTINE stg_check_parameters
	472
	473
	474	!------------------------------------------------------------------------------!
	475	! Description:
	476	! ------------
	477	!> Header output for synthetic turbulence generator
	478	!------------------------------------------------------------------------------!
	479	SUBROUTINE stg_header ( io )
	480
	481
	482	IMPLICIT NONE
	483
	484	INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file
	485
	486	!
	487	!-- Write synthetic turbulence generator Header
	488	WRITE( io, 1 )
[2776]	489	IF ( use_syn_turb_gen ) THEN
[2259]	490	WRITE( io, 2 )
	491	ELSE
	492	WRITE( io, 3 )
	493	ENDIF
[3347]	494
	495	IF ( parametrize_inflow_turbulence ) THEN
	496	WRITE( io, 4 ) dt_stg_adjust
	497	ELSE
	498	WRITE( io, 5 )
	499	ENDIF
[2259]	500
	501	1 FORMAT (//' Synthetic turbulence generator information:'/ &
	502	' ------------------------------------------'/)
[3347]	503	2 FORMAT (' synthetic turbulence generator is switched on')
	504	3 FORMAT (' synthetic turbulence generator is switched off')
[3348]	505	4 FORMAT (' imposed turbulence statistics are parametrized and ajdusted to boundary-layer development each ', F8.2, ' s' )
[3347]	506	5 FORMAT (' imposed turbulence is read from file' )
[2259]	507
	508	END SUBROUTINE stg_header
	509
	510
	511	!------------------------------------------------------------------------------!
	512	! Description:
	513	! ------------
	514	!> Initialization of the synthetic turbulence generator
	515	!------------------------------------------------------------------------------!
	516	SUBROUTINE stg_init
	517
	518
	519	USE arrays_3d, &
[3347]	520	ONLY: dzw, ddzw, u_init, v_init, zu
[2259]	521
	522	USE control_parameters, &
[3241]	523	ONLY: child_domain, coupling_char, e_init, nesting_offline, rans_mode
[2259]	524
	525	USE grid_variables, &
[3288]	526	ONLY: ddx, ddy, dx, dy
[2259]	527
[2938]	528	USE indices, &
	529	ONLY: nz
[2259]	530
[2945]	531	USE pmc_interface, &
	532	ONLY : rans_mode_parent
[2938]	533
[2945]	534
[2259]	535	IMPLICIT NONE
	536
[3347]	537	LOGICAL :: file_stg_exist = .FALSE. !< flag indicating whether parameter file for Reynolds stress and length scales exist
[2938]	538
[2669]	539	#if defined( __parallel )
[2259]	540	INTEGER(KIND=MPI_ADDRESS_KIND) :: extent !< extent of new MPI type
	541	INTEGER(KIND=MPI_ADDRESS_KIND) :: tob=0 !< dummy variable
[2669]	542	#endif
[2259]	543
[2938]	544	INTEGER(iwp) :: i !> grid index in x-direction
[2259]	545	INTEGER(iwp) :: j !> loop index
	546	INTEGER(iwp) :: k !< index
	547	INTEGER(iwp) :: newtype !< dummy MPI type
	548	INTEGER(iwp) :: realsize !< size of REAL variables
	549	INTEGER(iwp) :: nseed !< dimension of random number seed
	550	INTEGER(iwp) :: startseed = 1234567890 !< start seed for random number generator
	551
	552	!
	553	!-- Dummy variables used for reading profiles
	554	REAL(wp) :: d1 !< u profile
	555	REAL(wp) :: d2 !< v profile
	556	REAL(wp) :: d3 !< w profile
	557	REAL(wp) :: d5 !< e profile
	558	REAL(wp) :: d11 !< vertical interpolation for a11
	559	REAL(wp) :: d21 !< vertical interpolation for a21
	560	REAL(wp) :: d22 !< vertical interpolation for a22
	561	REAL(wp) :: luy !< length scale for u in y direction
	562	REAL(wp) :: luz !< length scale for u in z direction
	563	REAL(wp) :: lvy !< length scale for v in y direction
	564	REAL(wp) :: lvz !< length scale for v in z direction
	565	REAL(wp) :: lwy !< length scale for w in y direction
	566	REAL(wp) :: lwz !< length scale for w in z direction
[3038]	567	REAL(wp) :: nnz !< increment used to determine processor decomposition of z-axis along x and y direction
[2259]	568	REAL(wp) :: zz !< height
	569
[2938]	570
[2259]	571	#if defined( __parallel )
	572	CALL MPI_BARRIER( comm2d, ierr )
	573	#endif
	574
	575	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'start' )
	576
[2669]	577	#if defined( __parallel )
[2259]	578	!
[2938]	579	!-- Determine processor decomposition of z-axis along x- and y-direction
	580	nnz = nz / pdims(1)
[2945]	581	nzb_x_stg = 1 + myidx * INT( nnz )
	582	nzt_x_stg = ( myidx + 1 ) * INT( nnz )
[2938]	583
[3038]	584	IF ( MOD( nz , pdims(1) ) /= 0 .AND. myidx == id_stg_right ) &
[2945]	585	nzt_x_stg = nzt_x_stg + myidx * ( nnz - INT( nnz ) )
[2938]	586
[3182]	587	IF ( nesting_offline .OR. ( child_domain .AND. rans_mode_parent &
	588	.AND. .NOT. rans_mode ) ) THEN
[2938]	589	nnz = nz / pdims(2)
[2945]	590	nzb_y_stg = 1 + myidy * INT( nnz )
	591	nzt_y_stg = ( myidy + 1 ) * INT( nnz )
[2938]	592
[2945]	593	IF ( MOD( nz , pdims(2) ) /= 0 .AND. myidy == id_stg_north ) &
[3038]	594	nzt_y_stg = nzt_y_stg + myidy * ( nnz - INT( nnz ) )
[2938]	595	ENDIF
	596
	597	!
[2259]	598	!-- Define MPI type used in stg_generate_seed_yz to gather vertical splitted
	599	!-- velocity seeds
	600	CALL MPI_TYPE_SIZE( MPI_REAL, realsize, ierr )
	601	extent = 1 * realsize
[2938]	602	!
[3038]	603	!-- Set-up MPI datatyp to involve all cores for turbulence generation at yz
	604	!-- layer
[2938]	605	!-- stg_type_yz: yz-slice with vertical bounds nzb:nzt+1
[2259]	606	CALL MPI_TYPE_CREATE_SUBARRAY( 2, [nzt-nzb+2,nyng-nysg+1], &
	607	[1,nyng-nysg+1], [0,0], MPI_ORDER_FORTRAN, MPI_REAL, newtype, ierr )
	608	CALL MPI_TYPE_CREATE_RESIZED( newtype, tob, extent, stg_type_yz, ierr )
	609	CALL MPI_TYPE_COMMIT( stg_type_yz, ierr )
	610	CALL MPI_TYPE_FREE( newtype, ierr )
	611
[2938]	612	! stg_type_yz_small: yz-slice with vertical bounds nzb_x_stg:nzt_x_stg+1
[2945]	613	CALL MPI_TYPE_CREATE_SUBARRAY( 2, [nzt_x_stg-nzb_x_stg+2,nyng-nysg+1], &
[2259]	614	[1,nyng-nysg+1], [0,0], MPI_ORDER_FORTRAN, MPI_REAL, newtype, ierr )
	615	CALL MPI_TYPE_CREATE_RESIZED( newtype, tob, extent, stg_type_yz_small, ierr )
	616	CALL MPI_TYPE_COMMIT( stg_type_yz_small, ierr )
	617	CALL MPI_TYPE_FREE( newtype, ierr )
	618
	619	! receive count and displacement for MPI_GATHERV in stg_generate_seed_yz
[2938]	620	ALLOCATE( recv_count_yz(pdims(1)), displs_yz(pdims(1)) )
[2259]	621
[2938]	622	recv_count_yz = nzt_x_stg-nzb_x_stg + 1
	623	recv_count_yz(pdims(1)) = recv_count_yz(pdims(1)) + 1
[2259]	624
	625	DO j = 1, pdims(1)
[2938]	626	displs_yz(j) = 0 + (nzt_x_stg-nzb_x_stg+1) * (j-1)
[2259]	627	ENDDO
[2938]	628	!
[3038]	629	!-- Set-up MPI datatyp to involve all cores for turbulence generation at xz
	630	!-- layer
[2938]	631	!-- stg_type_xz: xz-slice with vertical bounds nzb:nzt+1
[3182]	632	IF ( nesting_offline .OR. ( child_domain .AND. rans_mode_parent &
	633	.AND. .NOT. rans_mode ) ) THEN
[2945]	634	CALL MPI_TYPE_CREATE_SUBARRAY( 2, [nzt-nzb+2,nxrg-nxlg+1], &
[2938]	635	[1,nxrg-nxlg+1], [0,0], MPI_ORDER_FORTRAN, MPI_REAL, newtype, ierr )
	636	CALL MPI_TYPE_CREATE_RESIZED( newtype, tob, extent, stg_type_xz, ierr )
	637	CALL MPI_TYPE_COMMIT( stg_type_xz, ierr )
	638	CALL MPI_TYPE_FREE( newtype, ierr )
	639
	640	! stg_type_yz_small: xz-slice with vertical bounds nzb_x_stg:nzt_x_stg+1
[2945]	641	CALL MPI_TYPE_CREATE_SUBARRAY( 2, [nzt_y_stg-nzb_y_stg+2,nxrg-nxlg+1], &
[2938]	642	[1,nxrg-nxlg+1], [0,0], MPI_ORDER_FORTRAN, MPI_REAL, newtype, ierr )
	643	CALL MPI_TYPE_CREATE_RESIZED( newtype, tob, extent, stg_type_xz_small, ierr )
	644	CALL MPI_TYPE_COMMIT( stg_type_xz_small, ierr )
	645	CALL MPI_TYPE_FREE( newtype, ierr )
	646
	647	! receive count and displacement for MPI_GATHERV in stg_generate_seed_yz
	648	ALLOCATE( recv_count_xz(pdims(2)), displs_xz(pdims(2)) )
	649
	650	recv_count_xz = nzt_y_stg-nzb_y_stg + 1
	651	recv_count_xz(pdims(2)) = recv_count_xz(pdims(2)) + 1
	652
	653	DO j = 1, pdims(2)
	654	displs_xz(j) = 0 + (nzt_y_stg-nzb_y_stg+1) * (j-1)
	655	ENDDO
	656
	657	ENDIF
	658
[2669]	659	#endif
[2259]	660	!
	661	!-- Define seed of random number
	662	CALL RANDOM_SEED()
	663	CALL RANDOM_SEED( size=nseed )
	664	ALLOCATE( seed(1:nseed) )
	665	DO j = 1, nseed
	666	seed(j) = startseed + j
	667	ENDDO
	668	CALL RANDOM_SEED(put=seed)
[3347]	669	!
	670	!-- Allocate required arrays
	671	!-- mean_inflow profiles must not be allocated in offline nesting
	672	IF ( .NOT. nesting_offline .AND. .NOT. child_domain ) THEN
	673	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) &
	674	ALLOCATE( mean_inflow_profiles(nzb:nzt+1,1:num_mean_inflow_profiles) )
	675	ENDIF
[2259]	676
[3347]	677	ALLOCATE ( a11(nzb:nzt+1), a21(nzb:nzt+1), a22(nzb:nzt+1), &
	678	a31(nzb:nzt+1), a32(nzb:nzt+1), a33(nzb:nzt+1), &
	679	nux(nzb:nzt+1), nuy(nzb:nzt+1), nuz(nzb:nzt+1), &
	680	nvx(nzb:nzt+1), nvy(nzb:nzt+1), nvz(nzb:nzt+1), &
	681	nwx(nzb:nzt+1), nwy(nzb:nzt+1), nwz(nzb:nzt+1), &
	682	r11(nzb:nzt+1), r21(nzb:nzt+1), r22(nzb:nzt+1), &
	683	r31(nzb:nzt+1), r32(nzb:nzt+1), r33(nzb:nzt+1), &
	684	tu(nzb:nzt+1), tv(nzb:nzt+1), tw(nzb:nzt+1) )
	685
	686	ALLOCATE ( dist_xz(nzb:nzt+1,nxlg:nxrg,3) )
	687	ALLOCATE ( dist_yz(nzb:nzt+1,nysg:nyng,3) )
	688	dist_xz = 0.0_wp
	689	dist_yz = 0.0_wp
	690	!
[2259]	691	!-- Read inflow profile
	692	!-- Height levels of profiles in input profile is as follows:
	693	!-- zu: luy, luz, tu, lvy, lvz, tv, r11, r21, r22, d1, d2, d5
	694	!-- zw: lwy, lwz, tw, r31, r32, r33, d3
	695	!-- WARNING: zz is not used at the moment
[2938]	696	INQUIRE( FILE = 'STG_PROFILES' // TRIM( coupling_char ), &
	697	EXIST = file_stg_exist )
[2259]	698
[2938]	699	IF ( file_stg_exist ) THEN
[2259]	700
[2938]	701	OPEN( 90, FILE='STG_PROFILES'//TRIM( coupling_char ), STATUS='OLD', &
	702	FORM='FORMATTED')
	703	!
	704	!-- Skip header
	705	READ( 90, * )
[2259]	706
[3182]	707	DO k = nzb+1, nzt+1
[2938]	708	READ( 90, * ) zz, luy, luz, tu(k), lvy, lvz, tv(k), lwy, lwz, tw(k), &
	709	r11(k), r21(k), r22(k), r31(k), r32(k), r33(k), &
	710	d1, d2, d3, d5
	711
[2259]	712	!
[3182]	713	!-- Convert length scales from meter to number of grid points.
[2938]	714	nuy(k) = INT( luy * ddy )
[3182]	715	nuz(k) = INT( luz * ddzw(k) )
[2938]	716	nvy(k) = INT( lvy * ddy )
[3182]	717	nvz(k) = INT( lvz * ddzw(k) )
[2938]	718	nwy(k) = INT( lwy * ddy )
[3182]	719	nwz(k) = INT( lwz * ddzw(k) )
[2938]	720	!
	721	!-- Workaround, assume isotropic turbulence
	722	nwx(k) = nwy(k)
	723	nvx(k) = nvy(k)
	724	nux(k) = nuy(k)
	725	!
	726	!-- Save Mean inflow profiles
	727	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	728	mean_inflow_profiles(k,1) = d1
	729	mean_inflow_profiles(k,2) = d2
	730	! mean_inflow_profiles(k,4) = d4
	731	mean_inflow_profiles(k,5) = d5
	732	ENDIF
	733	ENDDO
[3182]	734	!
	735	!-- Set lenght scales at surface grid point
	736	nuy(nzb) = nuy(nzb+1)
	737	nuz(nzb) = nuz(nzb+1)
	738	nvy(nzb) = nvy(nzb+1)
	739	nvz(nzb) = nvz(nzb+1)
	740	nwy(nzb) = nwy(nzb+1)
	741	nwz(nzb) = nwz(nzb+1)
	742
[2938]	743	CLOSE( 90 )
[3347]	744	!
	745	!-- Calculate coefficient matrix from Reynolds stress tensor
	746	!-- (Lund rotation)
	747	CALL calc_coeff_matrix
	748	!
	749	!-- No information about turbulence and its length scales are available.
	750	!-- Instead, parametrize turbulence which is imposed at the boundaries.
	751	!-- Set flag which indicates that turbulence is parametrized, which is done
	752	!-- later when energy-balance models are already initialized. This is
	753	!-- because the STG needs information about surface properties such as
	754	!-- roughness to build 'realistic' turbulence profiles.
[2938]	755	ELSE
[2259]	756	!
[3347]	757	!-- Set flag indicating that turbulence is parametrized
	758	parametrize_inflow_turbulence = .TRUE.
	759	!
	760	!-- Determine boundary-layer depth, which is used to initialize lenght
	761	!-- scales
	762	CALL calc_scaling_variables
	763	!
	764	!-- Initialize lenght and time scales, which in turn are used
	765	!-- to initialize the filter functions.
	766	CALL calc_length_and_time_scale
	767
[2938]	768	ENDIF
	769
[2259]	770	!
[3347]	771	!-- Assign initial profiles. Note, this is only required if turbulent
	772	!-- inflow from the left is desired, not in case of any of the
	773	!-- nesting (offline or self nesting) approaches.
[3182]	774	IF ( .NOT. nesting_offline .AND. .NOT. child_domain ) THEN
[2938]	775	u_init = mean_inflow_profiles(:,1)
	776	v_init = mean_inflow_profiles(:,2)
	777	!pt_init = mean_inflow_profiles(:,4)
	778	e_init = MAXVAL( mean_inflow_profiles(:,5) )
	779	ENDIF
[3347]	780
[2938]	781	!
[2259]	782	!-- Define the size of the filter functions and allocate them.
	783	merg = 0
	784
	785	! arrays must be large enough to cover the largest length scale
	786	DO k = nzb, nzt+1
[2938]	787	j = MAX( ABS(nux(k)), ABS(nuy(k)), ABS(nuz(k)), &
	788	ABS(nvx(k)), ABS(nvy(k)), ABS(nvz(k)), &
	789	ABS(nwx(k)), ABS(nwy(k)), ABS(nwz(k)) )
[2259]	790	IF ( j > merg ) merg = j
	791	ENDDO
	792
	793	merg = 2 * merg
	794	mergp = merg + nbgp
	795
[2938]	796	ALLOCATE ( bux(-merg:merg,nzb:nzt+1), &
	797	buy(-merg:merg,nzb:nzt+1), &
	798	buz(-merg:merg,nzb:nzt+1), &
	799	bvx(-merg:merg,nzb:nzt+1), &
	800	bvy(-merg:merg,nzb:nzt+1), &
	801	bvz(-merg:merg,nzb:nzt+1), &
	802	bwx(-merg:merg,nzb:nzt+1), &
	803	bwy(-merg:merg,nzb:nzt+1), &
	804	bwz(-merg:merg,nzb:nzt+1) )
[2259]	805
	806	!
[2938]	807	!-- Allocate velocity seeds for turbulence at xz-layer
	808	ALLOCATE ( fu_xz( nzb:nzt+1,nxlg:nxrg), fuo_xz(nzb:nzt+1,nxlg:nxrg), &
	809	fv_xz( nzb:nzt+1,nxlg:nxrg), fvo_xz(nzb:nzt+1,nxlg:nxrg), &
	810	fw_xz( nzb:nzt+1,nxlg:nxrg), fwo_xz(nzb:nzt+1,nxlg:nxrg) )
[2259]	811
[2938]	812	!
	813	!-- Allocate velocity seeds for turbulence at yz-layer
	814	ALLOCATE ( fu_yz( nzb:nzt+1,nysg:nyng), fuo_yz(nzb:nzt+1,nysg:nyng), &
	815	fv_yz( nzb:nzt+1,nysg:nyng), fvo_yz(nzb:nzt+1,nysg:nyng), &
	816	fw_yz( nzb:nzt+1,nysg:nyng), fwo_yz(nzb:nzt+1,nysg:nyng) )
[2259]	817
[2938]	818	fu_xz = 0.0_wp
	819	fuo_xz = 0.0_wp
	820	fv_xz = 0.0_wp
	821	fvo_xz = 0.0_wp
	822	fw_xz = 0.0_wp
	823	fwo_xz = 0.0_wp
	824
	825	fu_yz = 0.0_wp
	826	fuo_yz = 0.0_wp
	827	fv_yz = 0.0_wp
	828	fvo_yz = 0.0_wp
	829	fw_yz = 0.0_wp
	830	fwo_yz = 0.0_wp
	831
[2259]	832	!
	833	!-- Create filter functions
[2938]	834	CALL stg_filter_func( nux, bux ) !filter ux
[2259]	835	CALL stg_filter_func( nuy, buy ) !filter uy
	836	CALL stg_filter_func( nuz, buz ) !filter uz
[2938]	837	CALL stg_filter_func( nvx, bvx ) !filter vx
[2259]	838	CALL stg_filter_func( nvy, bvy ) !filter vy
	839	CALL stg_filter_func( nvz, bvz ) !filter vz
[2938]	840	CALL stg_filter_func( nwx, bwx ) !filter wx
[2259]	841	CALL stg_filter_func( nwy, bwy ) !filter wy
	842	CALL stg_filter_func( nwz, bwz ) !filter wz
	843
	844	#if defined( __parallel )
	845	CALL MPI_BARRIER( comm2d, ierr )
	846	#endif
	847
	848	!
[2938]	849	!-- In case of restart, calculate velocity seeds fu, fv, fw from former
	850	! time step.
	851	! Bug: fu, fv, fw are different in those heights where a11, a22, a33
	852	! are 0 compared to the prerun. This is mostly for k=nzt+1.
[2259]	853	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
[2938]	854	IF ( myidx == id_stg_left .OR. myidx == id_stg_right ) THEN
	855
	856	IF ( myidx == id_stg_left ) i = -1
	857	IF ( myidx == id_stg_right ) i = nxr+1
	858
[2259]	859	DO j = nysg, nyng
	860	DO k = nzb, nzt+1
	861
	862	IF ( a11(k) .NE. 0._wp ) THEN
[2938]	863	fu_yz(k,j) = ( u(k,j,i) / mc_factor - u_init(k) ) / a11(k)
[2259]	864	ELSE
[2938]	865	fu_yz(k,j) = 0._wp
[2259]	866	ENDIF
	867
	868	IF ( a22(k) .NE. 0._wp ) THEN
[2938]	869	fv_yz(k,j) = ( v(k,j,i) / mc_factor - a21(k) * fu_yz(k,j) - &
	870	v_init(k) ) / a22(k)
[2259]	871	ELSE
[2938]	872	fv_yz(k,j) = 0._wp
[2259]	873	ENDIF
	874
	875	IF ( a33(k) .NE. 0._wp ) THEN
[2938]	876	fw_yz(k,j) = ( w(k,j,i) / mc_factor - a31(k) * fu_yz(k,j) - &
	877	a32(k) * fv_yz(k,j) ) / a33(k)
[2259]	878	ELSE
[2938]	879	fw_yz = 0._wp
[2259]	880	ENDIF
	881
	882	ENDDO
	883	ENDDO
	884	ENDIF
	885	ENDIF
	886
	887	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'stop' )
	888
	889	END SUBROUTINE stg_init
	890
	891
	892	!------------------------------------------------------------------------------!
	893	! Description:
	894	! ------------
	895	!> Calculate filter function bxx from length scale nxx following Eg.9 and 10
	896	!> (Xie and Castro, 2008)
	897	!------------------------------------------------------------------------------!
	898	SUBROUTINE stg_filter_func( nxx, bxx )
	899
	900
	901	IMPLICIT NONE
	902
	903	INTEGER(iwp) :: k !< loop index
	904	INTEGER(iwp) :: n_k !< length scale nXX in height k
	905	INTEGER(iwp) :: n_k2 !< n_k * 2
	906	INTEGER(iwp) :: nf !< index for length scales
	907
	908	REAL(wp) :: bdenom !< denominator for filter functions bXX
	909	REAL(wp) :: qsi = 1.0_wp !< minimization factor
	910
	911	INTEGER(iwp), DIMENSION(:) :: nxx(nzb:nzt+1) !< length scale (in gp)
	912
	913	REAL(wp), DIMENSION(:,:) :: bxx(-merg:merg,nzb:nzt+1) !< filter function
	914
	915
	916	bxx = 0.0_wp
	917
	918	DO k = nzb, nzt+1
	919	bdenom = 0.0_wp
	920	n_k = nxx(k)
	921	IF ( n_k /= 0 ) THEN
	922	n_k2 = n_k * 2
	923
	924	!
	925	!-- ( Eq.10 )^2
	926	DO nf = -n_k2, n_k2
	927	bdenom = bdenom + EXP( -qsi * pi * ABS(nf) / n_k )**2
	928	ENDDO
	929
	930	!
	931	!-- ( Eq.9 )
	932	bdenom = SQRT( bdenom )
	933	DO nf = -n_k2, n_k2
	934	bxx(nf,k) = EXP( -qsi * pi * ABS(nf) / n_k ) / bdenom
	935	ENDDO
	936	ENDIF
	937	ENDDO
	938
[3347]	939	END SUBROUTINE stg_filter_func
[2259]	940
	941
	942	!------------------------------------------------------------------------------!
	943	! Description:
	944	! ------------
	945	!> Parin for &stg_par for synthetic turbulence generator
	946	!------------------------------------------------------------------------------!
	947	SUBROUTINE stg_parin
	948
	949
	950	IMPLICIT NONE
	951
	952	CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file
	953
	954
[3347]	955	NAMELIST /stg_par/ dt_stg_adjust, dt_stg_call, use_syn_turb_gen
[2259]	956
	957	line = ' '
	958
	959	!
	960	!-- Try to find stg package
	961	REWIND ( 11 )
	962	line = ' '
	963	DO WHILE ( INDEX( line, '&stg_par' ) == 0 )
[3246]	964	READ ( 11, '(A)', END=20 ) line
[2259]	965	ENDDO
	966	BACKSPACE ( 11 )
	967
	968	!
	969	!-- Read namelist
[3246]	970	READ ( 11, stg_par, ERR = 10, END = 20 )
[2259]	971
	972	!
	973	!-- Set flag that indicates that the synthetic turbulence generator is switched
	974	!-- on
[2776]	975	syn_turb_gen = .TRUE.
[3246]	976	GOTO 20
[2259]	977
[3246]	978	10 BACKSPACE( 11 )
[3248]	979	READ( 11 , '(A)') line
	980	CALL parin_fail_message( 'stg_par', line )
[2563]	981
[3246]	982	20 CONTINUE
[2259]	983
	984	END SUBROUTINE stg_parin
	985
	986
	987	!------------------------------------------------------------------------------!
	988	! Description:
	989	! ------------
[2894]	990	!> This routine reads the respective restart data.
[2576]	991	!------------------------------------------------------------------------------!
[2894]	992	SUBROUTINE stg_rrd_global( found )
[2576]	993
	994
[2894]	995	USE control_parameters, &
	996	ONLY: length, restart_string
[2576]	997
	998
[2894]	999	IMPLICIT NONE
[2576]	1000
[3044]	1001	LOGICAL, INTENT(OUT) :: found !< flag indicating if variable was found
[2259]	1002
	1003
[2894]	1004	found = .TRUE.
[2259]	1005
[3038]	1006
[2894]	1007	SELECT CASE ( restart_string(1:length) )
[2259]	1008
[2894]	1009	CASE ( 'mc_factor' )
	1010	READ ( 13 ) mc_factor
	1011	CASE ( 'use_syn_turb_gen' )
	1012	READ ( 13 ) use_syn_turb_gen
[2259]	1013
[2894]	1014	CASE DEFAULT
[2259]	1015
[3038]	1016	found = .FALSE.
[2259]	1017
[2894]	1018	END SELECT
[2259]	1019
	1020
[2894]	1021	END SUBROUTINE stg_rrd_global
[2259]	1022
	1023
	1024	!------------------------------------------------------------------------------!
	1025	! Description:
	1026	! ------------
	1027	!> This routine writes the respective restart data.
	1028	!------------------------------------------------------------------------------!
[2894]	1029	SUBROUTINE stg_wrd_global
[2259]	1030
	1031
	1032	IMPLICIT NONE
	1033
[2894]	1034	CALL wrd_write_string( 'mc_factor' )
[2259]	1035	WRITE ( 14 ) mc_factor
	1036
[2894]	1037	CALL wrd_write_string( 'use_syn_turb_gen' )
	1038	WRITE ( 14 ) use_syn_turb_gen
[2259]	1039
	1040
[2894]	1041	END SUBROUTINE stg_wrd_global
[2259]	1042
[2894]	1043
[2259]	1044	!------------------------------------------------------------------------------!
	1045	! Description:
	1046	! ------------
	1047	!> Create turbulent inflow fields for u, v, w with prescribed length scales and
	1048	!> Reynolds stress tensor after a method of Xie and Castro (2008), modified
	1049	!> following suggestions of Kim et al. (2013), and using a Lund rotation
	1050	!> (Lund, 1998).
	1051	!------------------------------------------------------------------------------!
	1052	SUBROUTINE stg_main
	1053
	1054
	1055	USE arrays_3d, &
	1056	ONLY: dzw
	1057
	1058	USE control_parameters, &
[3182]	1059	ONLY: child_domain, dt_3d, intermediate_timestep_count, &
[3646]	1060	nesting_offline, rans_mode, time_since_reference_point, &
	1061	volume_flow_initial
[2259]	1062
[2938]	1063	USE grid_variables, &
	1064	ONLY: dx, dy
	1065
[2259]	1066	USE indices, &
[2938]	1067	ONLY: wall_flags_0
[2259]	1068
	1069	USE statistics, &
	1070	ONLY: weight_substep
	1071
[2945]	1072	USE pmc_interface, &
	1073	ONLY : rans_mode_parent
[2259]	1074
[2945]	1075
[2259]	1076	IMPLICIT NONE
	1077
[2938]	1078	INTEGER(iwp) :: i !< grid index in x-direction
[2259]	1079	INTEGER(iwp) :: j !< loop index in y-direction
	1080	INTEGER(iwp) :: k !< loop index in z-direction
	1081
	1082	REAL(wp) :: dt_stg !< wheighted subtimestep
	1083	REAL(wp) :: mc_factor_l !< local mass flux correction factor
[2938]	1084	REAL(wp) :: volume_flow !< mass flux through lateral boundary
	1085	REAL(wp) :: volume_flow_l !< local mass flux through lateral boundary
[2259]	1086
	1087	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'start' )
	1088
	1089	!
	1090	!-- Calculate time step which is needed for filter functions
[3347]	1091	dt_stg = MAX( dt_3d, dt_stg_call ) !* weight_substep(intermediate_timestep_count)
[2259]	1092	!
	1093	!-- Initial value of fu, fv, fw
[3646]	1094	IF ( time_since_reference_point == 0.0_wp .AND. .NOT. velocity_seed_initialized ) THEN
[2938]	1095	CALL stg_generate_seed_yz( nuy, nuz, buy, buz, fu_yz, id_stg_left )
	1096	CALL stg_generate_seed_yz( nvy, nvz, bvy, bvz, fv_yz, id_stg_left )
	1097	CALL stg_generate_seed_yz( nwy, nwz, bwy, bwz, fw_yz, id_stg_left )
	1098
[3182]	1099	IF ( nesting_offline .OR. ( child_domain .AND. rans_mode_parent &
	1100	.AND. .NOT. rans_mode ) ) THEN
[2938]	1101	!
	1102	!-- Generate turbulence at right boundary
	1103	CALL stg_generate_seed_yz( nuy, nuz, buy, buz, fu_yz, id_stg_right )
	1104	CALL stg_generate_seed_yz( nvy, nvz, bvy, bvz, fv_yz, id_stg_right )
	1105	CALL stg_generate_seed_yz( nwy, nwz, bwy, bwz, fw_yz, id_stg_right )
	1106	!
	1107	!-- Generate turbulence at north boundary
	1108	CALL stg_generate_seed_xz( nux, nuz, bux, buz, fu_xz, id_stg_north )
	1109	CALL stg_generate_seed_xz( nvx, nvz, bvx, bvz, fv_xz, id_stg_north )
	1110	CALL stg_generate_seed_xz( nwx, nwz, bwx, bwz, fw_xz, id_stg_north )
	1111	!
	1112	!-- Generate turbulence at south boundary
	1113	CALL stg_generate_seed_xz( nux, nuz, bux, buz, fu_xz, id_stg_south )
	1114	CALL stg_generate_seed_xz( nvx, nvz, bvx, bvz, fv_xz, id_stg_south )
	1115	CALL stg_generate_seed_xz( nwx, nwz, bwx, bwz, fw_xz, id_stg_south )
	1116	ENDIF
[2259]	1117	velocity_seed_initialized = .TRUE.
	1118	ENDIF
[3347]	1119
[2259]	1120	!
	1121	!-- New set of fu, fv, fw
[2938]	1122	CALL stg_generate_seed_yz( nuy, nuz, buy, buz, fuo_yz, id_stg_left )
	1123	CALL stg_generate_seed_yz( nvy, nvz, bvy, bvz, fvo_yz, id_stg_left )
	1124	CALL stg_generate_seed_yz( nwy, nwz, bwy, bwz, fwo_yz, id_stg_left )
[3347]	1125
[3182]	1126	IF ( nesting_offline .OR. ( child_domain .AND. rans_mode_parent &
[3347]	1127	.AND. .NOT. rans_mode ) ) THEN
[2938]	1128	!
[3347]	1129	!-- Generate turbulence at right boundary
	1130	CALL stg_generate_seed_yz( nuy, nuz, buy, buz, fuo_yz, id_stg_right )
	1131	CALL stg_generate_seed_yz( nvy, nvz, bvy, bvz, fvo_yz, id_stg_right )
	1132	CALL stg_generate_seed_yz( nwy, nwz, bwy, bwz, fwo_yz, id_stg_right )
[2938]	1133	!
[3347]	1134	!-- Generate turbulence at north boundary
	1135	CALL stg_generate_seed_xz( nux, nuz, bux, buz, fuo_xz, id_stg_north )
	1136	CALL stg_generate_seed_xz( nvx, nvz, bvx, bvz, fvo_xz, id_stg_north )
	1137	CALL stg_generate_seed_xz( nwx, nwz, bwx, bwz, fwo_xz, id_stg_north )
[2938]	1138	!
[3347]	1139	!-- Generate turbulence at south boundary
	1140	CALL stg_generate_seed_xz( nux, nuz, bux, buz, fuo_xz, id_stg_south )
	1141	CALL stg_generate_seed_xz( nvx, nvz, bvx, bvz, fvo_xz, id_stg_south )
	1142	CALL stg_generate_seed_xz( nwx, nwz, bwx, bwz, fwo_xz, id_stg_south )
[2938]	1143	ENDIF
[3347]	1144
[2938]	1145	!
	1146	!-- Turbulence generation at left and or right boundary
	1147	IF ( myidx == id_stg_left .OR. myidx == id_stg_right ) THEN
[3347]	1148
[2259]	1149	DO j = nysg, nyng
	1150	DO k = nzb, nzt + 1
	1151	!
	1152	!-- Update fu, fv, fw following Eq. 14 of Xie and Castro (2008)
	1153	IF ( tu(k) == 0.0_wp ) THEN
[2938]	1154	fu_yz(k,j) = fuo_yz(k,j)
[2259]	1155	ELSE
[3347]	1156	fu_yz(k,j) = fu_yz(k,j) * EXP( -pi * dt_stg * 0.5_wp / tu(k) ) + &
[2938]	1157	fuo_yz(k,j) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tu(k) ) )
[2259]	1158	ENDIF
	1159
	1160	IF ( tv(k) == 0.0_wp ) THEN
[2938]	1161	fv_yz(k,j) = fvo_yz(k,j)
[2259]	1162	ELSE
[3347]	1163	fv_yz(k,j) = fv_yz(k,j) * EXP( -pi * dt_stg * 0.5_wp / tv(k) ) + &
[2938]	1164	fvo_yz(k,j) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tv(k) ) )
[2259]	1165	ENDIF
	1166
	1167	IF ( tw(k) == 0.0_wp ) THEN
[2938]	1168	fw_yz(k,j) = fwo_yz(k,j)
[2259]	1169	ELSE
[3347]	1170	fw_yz(k,j) = fw_yz(k,j) * EXP( -pi * dt_stg * 0.5_wp / tw(k) ) + &
[2938]	1171	fwo_yz(k,j) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tw(k) ) )
[2259]	1172	ENDIF
	1173	!
	1174	!-- Lund rotation following Eq. 17 in Xie and Castro (2008).
	1175	!-- Additional factors are added to improve the variance of v and w
	1176	IF( k == 0 ) THEN
[2938]	1177	dist_yz(k,j,1) = 0.0_wp
	1178	dist_yz(k,j,2) = 0.0_wp
	1179	dist_yz(k,j,3) = 0.0_wp
[2259]	1180	ELSE
[3347]	1181	dist_yz(k,j,1) = MIN( a11(k) * fu_yz(k,j), 3.0_wp )
[2259]	1182	!experimental test of 1.2
[3347]	1183	dist_yz(k,j,2) = MIN( ( SQRT( a22(k) / MAXVAL(a22) ) &
	1184	* 1.2_wp ) &
	1185	* ( a21(k) * fu_yz(k,j) &
	1186	+ a22(k) * fv_yz(k,j) ), 3.0_wp )
	1187	dist_yz(k,j,3) = MIN( ( SQRT(a33(k) / MAXVAL(a33) ) &
	1188	* 1.3_wp ) &
	1189	* ( a31(k) * fu_yz(k,j) &
	1190	+ a32(k) * fv_yz(k,j) &
	1191	+ a33(k) * fw_yz(k,j) ), 3.0_wp )
[2259]	1192	ENDIF
	1193
	1194	ENDDO
	1195	ENDDO
	1196
	1197	!
	1198	!-- Mass flux correction following Kim et al. (2013)
	1199	!-- This correction factor insures that the mass flux is preserved at the
	1200	!-- inflow boundary
[3182]	1201	IF ( .NOT. nesting_offline .AND. .NOT. child_domain ) THEN
[2938]	1202	mc_factor_l = 0.0_wp
	1203	mc_factor = 0.0_wp
	1204	DO j = nys, nyn
	1205	DO k = nzb+1, nzt
	1206	mc_factor_l = mc_factor_l + dzw(k) * &
	1207	( mean_inflow_profiles(k,1) + dist_yz(k,j,1) )
	1208	ENDDO
[2259]	1209	ENDDO
	1210
	1211	#if defined( __parallel )
[3347]	1212	CALL MPI_ALLREDUCE( mc_factor_l, mc_factor, 1, MPI_REAL, MPI_SUM, &
	1213	comm1dy, ierr )
[2259]	1214	#else
[2938]	1215	mc_factor = mc_factor_l
[2259]	1216	#endif
	1217
[2938]	1218	mc_factor = volume_flow_initial(1) / mc_factor
[2259]	1219
	1220	!
[2938]	1221	!-- Add disturbance at the inflow
	1222	DO j = nysg, nyng
	1223	DO k = nzb, nzt+1
	1224	u(k,j,-nbgp+1:0) = ( mean_inflow_profiles(k,1) + &
	1225	dist_yz(k,j,1) ) * mc_factor
	1226	v(k,j,-nbgp:-1) = ( mean_inflow_profiles(k,2) + &
	1227	dist_yz(k,j,2) ) * mc_factor
	1228	w(k,j,-nbgp:-1) = dist_yz(k,j,3) * mc_factor
	1229	ENDDO
[2259]	1230	ENDDO
[2938]	1231
	1232	ELSE
	1233	!
	1234	!-- First, calculate volume flow at yz boundary
	1235	IF ( myidx == id_stg_left ) i = nxl
	1236	IF ( myidx == id_stg_right ) i = nxr+1
	1237
	1238	volume_flow_l = 0.0_wp
	1239	volume_flow = 0.0_wp
	1240	mc_factor_l = 0.0_wp
	1241	mc_factor = 0.0_wp
	1242	DO j = nys, nyn
	1243	DO k = nzb+1, nzt
	1244	volume_flow_l = volume_flow_l + u(k,j,i) * dzw(k) * dy &
[3038]	1245	* MERGE( 1.0_wp, 0.0_wp, &
[2938]	1246	BTEST( wall_flags_0(k,j,i), 1 ) )
	1247
	1248	mc_factor_l = mc_factor_l + ( u(k,j,i) + dist_yz(k,j,1) ) &
	1249	* dzw(k) * dy &
[3038]	1250	* MERGE( 1.0_wp, 0.0_wp, &
[2938]	1251	BTEST( wall_flags_0(k,j,i), 1 ) )
	1252	ENDDO
	1253	ENDDO
	1254	#if defined( __parallel )
	1255	CALL MPI_ALLREDUCE( volume_flow_l, volume_flow, &
	1256	1, MPI_REAL, MPI_SUM, comm1dy, ierr )
	1257	CALL MPI_ALLREDUCE( mc_factor_l, mc_factor, &
	1258	1, MPI_REAL, MPI_SUM, comm1dy, ierr )
	1259	#else
	1260	volume_flow = volume_flow_l
	1261	mc_factor = mc_factor_l
	1262	#endif
	1263
	1264	mc_factor = volume_flow / mc_factor
	1265
	1266	!
	1267	!-- Add disturbances
	1268	IF ( myidx == id_stg_left ) THEN
[3186]	1269	DO j = nys, nyn
[3347]	1270	DO k = nzb+1, nzt
[3186]	1271	u(k,j,0) = ( u(k,j,0) + dist_yz(k,j,1) ) &
	1272	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1273	BTEST( wall_flags_0(k,j,0), 1 ) )
[3347]	1274	u(k,j,-1) = u(k,j,0)
[3186]	1275	v(k,j,-1) = ( v(k,j,-1) + dist_yz(k,j,2) ) &
	1276	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1277	BTEST( wall_flags_0(k,j,-1), 2 ) )
	1278	w(k,j,-1) = ( w(k,j,-1) + dist_yz(k,j,3) ) &
	1279	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1280	BTEST( wall_flags_0(k,j,-1), 3 ) )
[2938]	1281	ENDDO
	1282	ENDDO
	1283	ENDIF
	1284	IF ( myidx == id_stg_right ) THEN
[3186]	1285	DO j = nys, nyn
[3347]	1286	DO k = nzb+1, nzt
[3186]	1287	u(k,j,nxr+1) = ( u(k,j,nxr+1) + dist_yz(k,j,1) ) &
	1288	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1289	BTEST( wall_flags_0(k,j,nxr+1), 1 ) )
	1290	v(k,j,nxr+1) = ( v(k,j,nxr+1) + dist_yz(k,j,2) ) &
	1291	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1292	BTEST( wall_flags_0(k,j,nxr+1), 2 ) )
	1293	w(k,j,nxr+1) = ( w(k,j,nxr+1) + dist_yz(k,j,3) ) &
	1294	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1295	BTEST( wall_flags_0(k,j,nxr+1), 3 ) )
[2938]	1296	ENDDO
	1297	ENDDO
	1298	ENDIF
	1299	ENDIF
	1300
	1301	ENDIF
	1302	!
	1303	!-- Turbulence generation at north and south boundary
	1304	IF ( myidy == id_stg_north .OR. myidy == id_stg_south ) THEN
[3347]	1305
[2938]	1306	DO i = nxlg, nxrg
	1307	DO k = nzb, nzt + 1
	1308	!
	1309	!-- Update fu, fv, fw following Eq. 14 of Xie and Castro (2008)
	1310	IF ( tu(k) == 0.0_wp ) THEN
	1311	fu_xz(k,i) = fuo_xz(k,i)
	1312	ELSE
	1313	fu_xz(k,i) = fu_xz(k,i) * EXP( -pi * dt_stg * 0.5_wp / tu(k) ) + &
	1314	fuo_xz(k,i) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tu(k) ) )
	1315	ENDIF
	1316
	1317	IF ( tv(k) == 0.0_wp ) THEN
	1318	fv_xz(k,i) = fvo_xz(k,i)
	1319	ELSE
	1320	fv_xz(k,i) = fv_xz(k,i) * EXP( -pi * dt_stg * 0.5_wp / tv(k) ) + &
[3347]	1321	fvo_xz(k,i) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tv(k) ) )
[2938]	1322	ENDIF
[3347]	1323
[2938]	1324	IF ( tw(k) == 0.0_wp ) THEN
	1325	fw_xz(k,i) = fwo_xz(k,i)
	1326	ELSE
	1327	fw_xz(k,i) = fw_xz(k,i) * EXP( -pi * dt_stg * 0.5_wp / tw(k) ) + &
[3347]	1328	fwo_xz(k,i) * SQRT( 1.0_wp - EXP( -pi * dt_stg / tw(k) ) )
[2938]	1329	ENDIF
	1330	!
	1331	!-- Lund rotation following Eq. 17 in Xie and Castro (2008).
	1332	!-- Additional factors are added to improve the variance of v and w
	1333	IF( k == 0 ) THEN
	1334	dist_xz(k,i,1) = 0.0_wp
	1335	dist_xz(k,i,2) = 0.0_wp
	1336	dist_xz(k,i,3) = 0.0_wp
	1337
	1338	ELSE
[3347]	1339	dist_xz(k,i,1) = MIN( a11(k) * fu_xz(k,i), 3.0_wp )
[2938]	1340	!experimental test of 1.2
[3347]	1341	dist_xz(k,i,2) = MIN( ( SQRT( a22(k) / MAXVAL(a22) ) &
	1342	* 1.2_wp ) &
	1343	* ( a21(k) * fu_xz(k,i) &
	1344	+ a22(k) * fv_xz(k,i) ), 3.0_wp )
	1345	dist_xz(k,i,3) = MIN( ( SQRT(a33(k) / MAXVAL(a33) ) &
	1346	* 1.3_wp ) &
	1347	* ( a31(k) * fu_xz(k,i) &
	1348	+ a32(k) * fv_xz(k,i) &
	1349	+ a33(k) * fw_xz(k,i) ), 3.0_wp )
[2938]	1350	ENDIF
	1351
	1352	ENDDO
[2259]	1353	ENDDO
[3347]	1354
[2938]	1355	!
	1356	!-- Mass flux correction following Kim et al. (2013)
	1357	!-- This correction factor insures that the mass flux is preserved at the
	1358	!-- inflow boundary.
	1359	!-- First, calculate volume flow at xz boundary
	1360	IF ( myidy == id_stg_south ) j = nys
	1361	IF ( myidy == id_stg_north ) j = nyn+1
[2259]	1362
[2938]	1363	volume_flow_l = 0.0_wp
	1364	volume_flow = 0.0_wp
	1365	mc_factor_l = 0.0_wp
	1366	mc_factor = 0.0_wp
	1367	DO i = nxl, nxr
	1368	DO k = nzb+1, nzt
[2945]	1369	volume_flow_l = volume_flow_l + v(k,j,i) * dzw(k) * dx &
[3038]	1370	* MERGE( 1.0_wp, 0.0_wp, &
[2938]	1371	BTEST( wall_flags_0(k,j,i), 2 ) )
	1372
[2945]	1373	mc_factor_l = mc_factor_l + ( v(k,j,i) + dist_xz(k,i,2) ) &
	1374	* dzw(k) * dx &
[3038]	1375	* MERGE( 1.0_wp, 0.0_wp, &
[2938]	1376	BTEST( wall_flags_0(k,j,i), 2 ) )
	1377	ENDDO
	1378	ENDDO
	1379	#if defined( __parallel )
[2945]	1380	CALL MPI_ALLREDUCE( volume_flow_l, volume_flow, &
[2938]	1381	1, MPI_REAL, MPI_SUM, comm1dx, ierr )
[2945]	1382	CALL MPI_ALLREDUCE( mc_factor_l, mc_factor, &
[2938]	1383	1, MPI_REAL, MPI_SUM, comm1dx, ierr )
	1384	#else
	1385	volume_flow = volume_flow_l
	1386	mc_factor = mc_factor_l
	1387	#endif
	1388
	1389	mc_factor = volume_flow / mc_factor
	1390
	1391	!
	1392	!-- Add disturbances
	1393	IF ( myidy == id_stg_south ) THEN
	1394
[3186]	1395	DO i = nxl, nxr
[3347]	1396	DO k = nzb+1, nzt
[3186]	1397	u(k,-1,i) = ( u(k,-1,i) + dist_xz(k,i,1) ) &
	1398	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1399	BTEST( wall_flags_0(k,-1,i), 1 ) )
	1400	v(k,0,i) = ( v(k,0,i) + dist_xz(k,i,2) ) &
	1401	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1402	BTEST( wall_flags_0(k,0,i), 2 ) )
[3347]	1403	v(k,-1,i) = v(k,0,i)
[3186]	1404	w(k,-1,i) = ( w(k,-1,i) + dist_xz(k,i,3) ) &
	1405	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
	1406	BTEST( wall_flags_0(k,-1,i), 3 ) )
[2938]	1407	ENDDO
	1408	ENDDO
	1409	ENDIF
	1410	IF ( myidy == id_stg_north ) THEN
	1411
[3186]	1412	DO i = nxl, nxr
[3347]	1413	DO k = nzb+1, nzt
	1414	u(k,nyn+1,i) = ( u(k,nyn+1,i) + dist_xz(k,i,1) ) &
	1415	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
[3186]	1416	BTEST( wall_flags_0(k,nyn+1,i), 1 ) )
[3347]	1417	v(k,nyn+1,i) = ( v(k,nyn+1,i) + dist_xz(k,i,2) ) &
	1418	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
[3186]	1419	BTEST( wall_flags_0(k,nyn+1,i), 2 ) )
[3347]	1420	w(k,nyn+1,i) = ( w(k,nyn+1,i) + dist_xz(k,i,3) ) &
	1421	* mc_factor * MERGE( 1.0_wp, 0.0_wp, &
[3186]	1422	BTEST( wall_flags_0(k,nyn+1,i), 3 ) )
[2938]	1423	ENDDO
	1424	ENDDO
	1425	ENDIF
[2259]	1426	ENDIF
[3347]	1427	!
	1428	!-- Finally, set time counter for calling STG to zero
	1429	time_stg_call = 0.0_wp
[2259]	1430
	1431	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'stop' )
	1432
	1433	END SUBROUTINE stg_main
	1434
	1435	!------------------------------------------------------------------------------!
	1436	! Description:
	1437	! ------------
	1438	!> Generate a set of random number rand_it wich is equal on each PE
	1439	!> and calculate the velocity seed f_n.
	1440	!> f_n is splitted in vertical direction by the number of PEs in x-direction and
	1441	!> and each PE calculates a vertical subsection of f_n. At the the end, all
	1442	!> parts are collected to form the full array.
	1443	!------------------------------------------------------------------------------!
[2938]	1444	SUBROUTINE stg_generate_seed_yz( n_y, n_z, b_y, b_z, f_n, id )
[2259]	1445
	1446
	1447	USE indices, &
	1448	ONLY: ny
	1449
	1450	IMPLICIT NONE
	1451
[2938]	1452	INTEGER(iwp) :: id !< core ids at respective boundaries
[2259]	1453	INTEGER(iwp) :: j !< loop index in y-direction
	1454	INTEGER(iwp) :: jj !< loop index in y-direction
	1455	INTEGER(iwp) :: k !< loop index in z-direction
	1456	INTEGER(iwp) :: kk !< loop index in z-direction
	1457	INTEGER(iwp) :: send_count !< send count for MPI_GATHERV
	1458
	1459	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_y !< length scale in y-direction
	1460	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_z !< length scale in z-direction
	1461	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_y2 !< n_y*2
	1462	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_z2 !< n_z*2
	1463
	1464	REAL(wp) :: nyz_inv !< inverse of number of grid points in yz-slice
	1465	REAL(wp) :: rand_av !< average of random number
	1466	REAL(wp) :: rand_sigma_inv !< inverse of stdev of random number
	1467
[3347]	1468	REAL(wp), DIMENSION(-merg:merg,nzb:nzt+1) :: b_y !< filter function in y-direction
	1469	REAL(wp), DIMENSION(-merg:merg,nzb:nzt+1) :: b_z !< filter function in z-direction
[2938]	1470	REAL(wp), DIMENSION(nzb_x_stg:nzt_x_stg+1,nysg:nyng) :: f_n_l !< local velocity seed
[2259]	1471	REAL(wp), DIMENSION(nzb:nzt+1,nysg:nyng) :: f_n !< velocity seed
	1472	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rand_it !< random number
	1473
	1474
	1475	!
	1476	!-- Generate random numbers using a seed generated in stg_init.
	1477	!-- The set of random numbers are modified to have an average of 0 and
	1478	!-- unit variance.
	1479	ALLOCATE( rand_it(nzb-mergp:nzt+1+mergp,-mergp:ny+mergp) )
	1480
	1481	rand_av = 0.0_wp
	1482	rand_sigma_inv = 0.0_wp
	1483	nyz_inv = 1.0_wp / REAL( ( nzt+1 - nzb+1 ) * ( ny+1 ), KIND=wp )
	1484
	1485	DO j = 0, ny
	1486	DO k = nzb, nzt+1
	1487	CALL RANDOM_NUMBER( rand_it(k,j) )
	1488	rand_av = rand_av + rand_it(k,j)
	1489	ENDDO
	1490	ENDDO
	1491
	1492	rand_av = rand_av * nyz_inv
	1493
	1494	DO j = 0, ny
	1495	DO k = nzb, nzt+1
	1496	rand_it(k,j) = rand_it(k,j) - rand_av
	1497	rand_sigma_inv = rand_sigma_inv + rand_it(k,j) ** 2
	1498	ENDDO
	1499	ENDDO
	1500
	1501	rand_sigma_inv = 1.0_wp / SQRT(rand_sigma_inv * nyz_inv)
	1502
	1503	DO j = 0, ny
	1504	DO k = nzb, nzt+1
	1505	rand_it(k,j) = rand_it(k,j) * rand_sigma_inv
	1506	ENDDO
	1507	ENDDO
	1508
	1509	!
	1510	!-- Periodic fill of random number in space
	1511	DO j = 0, ny
	1512	DO k = 1, mergp
	1513	rand_it(nzb -k,j) = rand_it(nzt+2-k,j) ! bottom margin
	1514	rand_it(nzt+1+k,j) = rand_it(nzb+k-1,j) ! top margin
	1515	ENDDO
	1516	ENDDO
	1517	DO j = 1, mergp
	1518	DO k = nzb-mergp, nzt+1+mergp
	1519	rand_it(k, -j) = rand_it(k,ny-j+1) ! south margin
	1520	rand_it(k,ny+j) = rand_it(k, j-1) ! north margin
	1521	ENDDO
	1522	ENDDO
	1523
	1524	!
	1525	!-- Generate velocity seed following Eq.6 of Xie and Castro (2008)
	1526	n_y2 = n_y * 2
	1527	n_z2 = n_z * 2
	1528	f_n_l = 0.0_wp
	1529
	1530	DO j = nysg, nyng
[2938]	1531	DO k = nzb_x_stg, nzt_x_stg+1
[2259]	1532	DO jj = -n_y2(k), n_y2(k)
	1533	DO kk = -n_z2(k), n_z2(k)
	1534	f_n_l(k,j) = f_n_l(k,j) &
	1535	+ b_y(jj,k) * b_z(kk,k) * rand_it(k+kk,j+jj)
	1536	ENDDO
	1537	ENDDO
	1538	ENDDO
	1539	ENDDO
	1540
	1541	DEALLOCATE( rand_it )
	1542	!
	1543	!-- Gather velocity seeds of full subdomain
[2938]	1544	send_count = nzt_x_stg - nzb_x_stg + 1
	1545	IF ( nzt_x_stg == nzt ) send_count = send_count + 1
[2259]	1546
	1547	#if defined( __parallel )
[2945]	1548	CALL MPI_GATHERV( f_n_l(nzb_x_stg,nysg), send_count, stg_type_yz_small, &
	1549	f_n(nzb+1,nysg), recv_count_yz, displs_yz, stg_type_yz, &
[2938]	1550	id, comm1dx, ierr )
[2259]	1551	#else
[2938]	1552	f_n(nzb+1:nzt+1,nysg:nyng) = f_n_l(nzb_x_stg:nzt_x_stg+1,nysg:nyng)
[2259]	1553	#endif
	1554
	1555
	1556	END SUBROUTINE stg_generate_seed_yz
	1557
[2938]	1558
	1559
	1560
	1561	!------------------------------------------------------------------------------!
	1562	! Description:
	1563	! ------------
	1564	!> Generate a set of random number rand_it wich is equal on each PE
	1565	!> and calculate the velocity seed f_n.
	1566	!> f_n is splitted in vertical direction by the number of PEs in y-direction and
	1567	!> and each PE calculates a vertical subsection of f_n. At the the end, all
	1568	!> parts are collected to form the full array.
	1569	!------------------------------------------------------------------------------!
	1570	SUBROUTINE stg_generate_seed_xz( n_x, n_z, b_x, b_z, f_n, id )
	1571
	1572
	1573	USE indices, &
	1574	ONLY: nx
	1575
	1576
	1577	IMPLICIT NONE
	1578
	1579	INTEGER(iwp) :: id !< core ids at respective boundaries
	1580	INTEGER(iwp) :: i !< loop index in x-direction
	1581	INTEGER(iwp) :: ii !< loop index in x-direction
	1582	INTEGER(iwp) :: k !< loop index in z-direction
	1583	INTEGER(iwp) :: kk !< loop index in z-direction
	1584	INTEGER(iwp) :: send_count !< send count for MPI_GATHERV
	1585
	1586	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_x !< length scale in x-direction
	1587	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_z !< length scale in z-direction
[3347]	1588	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_x2 !< n_x*2
[2938]	1589	INTEGER(iwp), DIMENSION(nzb:nzt+1) :: n_z2 !< n_z*2
	1590
	1591	REAL(wp) :: nxz_inv !< inverse of number of grid points in xz-slice
	1592	REAL(wp) :: rand_av !< average of random number
	1593	REAL(wp) :: rand_sigma_inv !< inverse of stdev of random number
	1594
[3347]	1595	REAL(wp), DIMENSION(-merg:merg,nzb:nzt+1) :: b_x !< filter function in x-direction
	1596	REAL(wp), DIMENSION(-merg:merg,nzb:nzt+1) :: b_z !< filter function in z-direction
[2938]	1597	REAL(wp), DIMENSION(nzb_y_stg:nzt_y_stg+1,nxlg:nxrg) :: f_n_l !< local velocity seed
	1598	REAL(wp), DIMENSION(nzb:nzt+1,nxlg:nxrg) :: f_n !< velocity seed
	1599	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: rand_it !< random number
	1600
	1601
	1602	!
	1603	!-- Generate random numbers using a seed generated in stg_init.
	1604	!-- The set of random numbers are modified to have an average of 0 and
	1605	!-- unit variance.
	1606	ALLOCATE( rand_it(nzb-mergp:nzt+1+mergp,-mergp:nx+mergp) )
	1607
	1608	rand_av = 0.0_wp
	1609	rand_sigma_inv = 0.0_wp
	1610	nxz_inv = 1.0_wp / REAL( ( nzt+1 - nzb+1 ) * ( nx+1 ), KIND=wp )
	1611
	1612	DO i = 0, nx
	1613	DO k = nzb, nzt+1
	1614	CALL RANDOM_NUMBER( rand_it(k,i) )
	1615	rand_av = rand_av + rand_it(k,i)
	1616	ENDDO
	1617	ENDDO
	1618
	1619	rand_av = rand_av * nxz_inv
	1620
	1621	DO i = 0, nx
	1622	DO k = nzb, nzt+1
	1623	rand_it(k,i) = rand_it(k,i) - rand_av
	1624	rand_sigma_inv = rand_sigma_inv + rand_it(k,i) ** 2
	1625	ENDDO
	1626	ENDDO
	1627
	1628	rand_sigma_inv = 1.0_wp / SQRT(rand_sigma_inv * nxz_inv)
	1629
	1630	DO i = 0, nx
	1631	DO k = nzb, nzt+1
	1632	rand_it(k,i) = rand_it(k,i) * rand_sigma_inv
	1633	ENDDO
	1634	ENDDO
	1635
	1636	!
	1637	!-- Periodic fill of random number in space
	1638	DO i = 0, nx
	1639	DO k = 1, mergp
	1640	rand_it(nzb-k,i) = rand_it(nzt+2-k,i) ! bottom margin
	1641	rand_it(nzt+1+k,i) = rand_it(nzb+k-1,i) ! top margin
	1642	ENDDO
	1643	ENDDO
	1644	DO i = 1, mergp
	1645	DO k = nzb-mergp, nzt+1+mergp
	1646	rand_it(k,-i) = rand_it(k,nx-i+1) ! left margin
	1647	rand_it(k,nx+i) = rand_it(k,i-1) ! right margin
	1648	ENDDO
	1649	ENDDO
	1650
	1651	!
	1652	!-- Generate velocity seed following Eq.6 of Xie and Castro (2008)
	1653	n_x2 = n_x * 2
	1654	n_z2 = n_z * 2
	1655	f_n_l = 0.0_wp
	1656
	1657	DO i = nxlg, nxrg
	1658	DO k = nzb_y_stg, nzt_y_stg+1
	1659	DO ii = -n_x2(k), n_x2(k)
	1660	DO kk = -n_z2(k), n_z2(k)
	1661	f_n_l(k,i) = f_n_l(k,i) &
	1662	+ b_x(ii,k) * b_z(kk,k) * rand_it(k+kk,i+ii)
	1663	ENDDO
	1664	ENDDO
	1665	ENDDO
	1666	ENDDO
	1667
	1668	DEALLOCATE( rand_it )
	1669
	1670	!
	1671	!-- Gather velocity seeds of full subdomain
	1672	send_count = nzt_y_stg - nzb_y_stg + 1
	1673	IF ( nzt_y_stg == nzt ) send_count = send_count + 1
	1674
	1675
	1676	#if defined( __parallel )
[2945]	1677	CALL MPI_GATHERV( f_n_l(nzb_y_stg,nxlg), send_count, stg_type_xz_small, &
[2938]	1678	f_n(nzb+1,nxlg), recv_count_xz, displs_xz, stg_type_xz, &
	1679	id, comm1dy, ierr )
	1680	#else
	1681	f_n(nzb+1:nzt+1,nxlg:nxrg) = f_n_l(nzb_y_stg:nzt_y_stg+1,nxlg:nxrg)
	1682	#endif
	1683
	1684
	1685	END SUBROUTINE stg_generate_seed_xz
	1686
[3347]	1687	!------------------------------------------------------------------------------!
	1688	! Description:
	1689	! ------------
	1690	!> Parametrization of the Reynolds stress tensor, following the parametrization
	1691	!> described in Rotach et al. (1996), which is applied in state-of-the-art
	1692	!> dispserion modelling. Please note, the parametrization does not distinguish
	1693	!> between along-wind and cross-wind turbulence.
	1694	!------------------------------------------------------------------------------!
	1695	SUBROUTINE parametrize_reynolds_stress
	1696
	1697	USE arrays_3d, &
	1698	ONLY: zu
	1699
	1700	IMPLICIT NONE
	1701
	1702	INTEGER(iwp) :: k !< loop index in z-direction
	1703
	1704	REAL(wp) :: zzi !< ratio of z/zi
	1705
	1706	!
	1707	!--
	1708	DO k = nzb+1, nzt+1
	1709
	1710	IF ( zu(k) <= zi_ribulk ) THEN
	1711	!
	1712	!-- Determine normalized height coordinate
	1713	zzi = zu(k) / zi_ribulk
	1714	!
	1715	!-- u'u' and v'v'. Assume isotropy. Note, add a small negative number
	1716	!-- to the denominator, else the merge-function can crash if scale_l is
	1717	!-- zero.
	1718	r11(k) = scale_us*2 ( &
	1719	MERGE( 0.35_wp * ( &
	1720	- zi_ribulk / ( kappa * scale_l - 10E-4_wp ) &
	1721	)**( 2.0_wp / 3.0_wp ), &
	1722	0.0_wp, &
	1723	scale_l < 0.0_wp ) &
	1724	+ 5.0_wp - 4.0_wp * zzi &
	1725	)
	1726
	1727	r22(k) = r11(k)
	1728	!
	1729	!-- w'w'
	1730	r33(k) = scale_wm*2 ( &
	1731	1.5_wp * zzi*( 2.0_wp / 3.0_wp ) EXP( -2.0_wp * zzi ) &
	1732	+ ( 1.7_wp - zzi ) * ( scale_us / scale_wm )**2 &
	1733	)
	1734	!
	1735	!-- u'w' and v'w'. Assume isotropy.
	1736	r31(k) = - scale_us*2 ( &
	1737	1.0_wp - EXP( 3.0_wp * ( zzi - 1.0_wp ) ) &
	1738	)
	1739
	1740	r32(k) = r31(k)
	1741	!
	1742	!-- For u'v' no parametrization exist so far - ?. For simplicity assume
	1743	!-- a similar profile as for u'w'.
	1744	r21(k) = r31(k)
	1745	!
	1746	!-- Above the boundary layer, assmume laminar flow conditions.
	1747	ELSE
	1748	r11(k) = 10E-8_wp
	1749	r22(k) = 10E-8_wp
	1750	r33(k) = 10E-8_wp
	1751	r21(k) = 10E-8_wp
	1752	r31(k) = 10E-8_wp
	1753	r32(k) = 10E-8_wp
	1754	ENDIF
	1755	ENDDO
	1756
	1757	!
	1758	!-- Set bottom boundary condition
	1759	r11(nzb) = r11(nzb+1)
	1760	r22(nzb) = r22(nzb+1)
	1761	r33(nzb) = r33(nzb+1)
	1762
	1763	r21(nzb) = r11(nzb+1)
	1764	r31(nzb) = r31(nzb+1)
	1765	r32(nzb) = r32(nzb+1)
	1766
	1767
	1768	END SUBROUTINE parametrize_reynolds_stress
	1769
	1770	!------------------------------------------------------------------------------!
	1771	! Description:
	1772	! ------------
	1773	!> Calculate the coefficient matrix from the Lund rotation.
	1774	!------------------------------------------------------------------------------!
	1775	SUBROUTINE calc_coeff_matrix
	1776
	1777	IMPLICIT NONE
	1778
	1779	INTEGER(iwp) :: k !< loop index in z-direction
	1780
	1781	!
	1782	!-- Calculate coefficient matrix. Split loops to allow for loop vectorization.
	1783	DO k = nzb+1, nzt+1
	1784	IF ( r11(k) > 0.0_wp ) THEN
	1785	a11(k) = SQRT( r11(k) )
	1786	a21(k) = r21(k) / a11(k)
	1787	a31(k) = r31(k) / a11(k)
	1788	ELSE
	1789	a11(k) = 10E-8_wp
	1790	a21(k) = 10E-8_wp
	1791	a31(k) = 10E-8_wp
	1792	ENDIF
	1793	ENDDO
	1794	DO k = nzb+1, nzt+1
	1795	a22(k) = r22(k) - a21(k)**2
	1796	IF ( a22(k) > 0.0_wp ) THEN
	1797	a22(k) = SQRT( a22(k) )
	1798	a32(k) = r32(k) - a21(k) * a31(k) / a22(k)
	1799	ELSE
	1800	a22(k) = 10E-8_wp
	1801	a32(k) = 10E-8_wp
	1802	ENDIF
	1803	ENDDO
	1804	DO k = nzb+1, nzt+1
	1805	a33(k) = r33(k) - a31(k)2 - a32(k)2
	1806	IF ( a33(k) > 0.0_wp ) THEN
	1807	a33(k) = SQRT( a33(k) )
	1808	ELSE
	1809	a33(k) = 10E-8_wp
	1810	ENDIF
	1811	ENDDO
	1812	!
	1813	!-- Set bottom boundary condition
	1814	a11(nzb) = a11(nzb+1)
	1815	a22(nzb) = a22(nzb+1)
	1816	a21(nzb) = a21(nzb+1)
	1817	a33(nzb) = a33(nzb+1)
	1818	a31(nzb) = a31(nzb+1)
	1819	a32(nzb) = a32(nzb+1)
	1820
	1821	END SUBROUTINE calc_coeff_matrix
	1822
	1823	!------------------------------------------------------------------------------!
	1824	! Description:
	1825	! ------------
	1826	!> This routine controls the re-adjustment of the turbulence statistics used
	1827	!> for generating turbulence at the lateral boundaries.
	1828	!------------------------------------------------------------------------------!
	1829	SUBROUTINE stg_adjust
	1830
	1831	IMPLICIT NONE
	1832
	1833	INTEGER(iwp) :: k
	1834
	1835	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'start' )
	1836	!
	1837	!-- Compute mean boundary layer height according to Richardson-Bulk
	1838	!-- criterion using the inflow profiles. Further velocity scale as well as
	1839	!-- mean friction velocity are calculated.
	1840	CALL calc_scaling_variables
	1841	!
	1842	!-- Set length and time scales depending on boundary-layer height
	1843	CALL calc_length_and_time_scale
	1844	!
	1845	!-- Parametrize Reynolds-stress tensor, diagonal elements as well
	1846	!-- as r21 (v'u'), r31 (w'u'), r32 (w'v'). Parametrization follows
	1847	!-- Rotach et al. (1996) and is based on boundary-layer depth,
	1848	!-- friction velocity and velocity scale.
	1849	CALL parametrize_reynolds_stress
	1850	!
	1851	!-- Calculate coefficient matrix from Reynolds stress tensor
	1852	!-- (Lund rotation)
	1853	CALL calc_coeff_matrix
	1854	!
	1855	!-- Determine filter functions on basis of updated length scales
	1856	CALL stg_filter_func( nux, bux ) !filter ux
	1857	CALL stg_filter_func( nuy, buy ) !filter uy
	1858	CALL stg_filter_func( nuz, buz ) !filter uz
	1859	CALL stg_filter_func( nvx, bvx ) !filter vx
	1860	CALL stg_filter_func( nvy, bvy ) !filter vy
	1861	CALL stg_filter_func( nvz, bvz ) !filter vz
	1862	CALL stg_filter_func( nwx, bwx ) !filter wx
	1863	CALL stg_filter_func( nwy, bwy ) !filter wy
	1864	CALL stg_filter_func( nwz, bwz ) !filter wz
	1865	!
	1866	!-- Reset time counter for controlling next adjustment to zero
	1867	time_stg_adjust = 0.0_wp
	1868
	1869	CALL cpu_log( log_point(57), 'synthetic_turbulence_gen', 'stop' )
	1870
	1871	END SUBROUTINE stg_adjust
	1872
	1873
	1874	!------------------------------------------------------------------------------!
	1875	! Description:
	1876	! ------------
	1877	!> Calculates turbuluent length and time scales if these are not available
	1878	!> from measurements.
	1879	!------------------------------------------------------------------------------!
	1880	SUBROUTINE calc_length_and_time_scale
	1881
	1882	USE arrays_3d, &
	1883	ONLY: dzw, ddzw, u_init, v_init, zu, zw
	1884
	1885	USE grid_variables, &
	1886	ONLY: ddx, ddy, dx, dy
	1887
	1888	USE statistics, &
	1889	ONLY: hom
	1890
	1891	IMPLICIT NONE
	1892
	1893
	1894	INTEGER(iwp) :: k !< loop index in z-direction
	1895
	1896	REAL(wp) :: length_scale !< typical length scale
	1897
	1898	!
	1899	!-- In initial call the boundary-layer depth can be zero. This case, set
	1900	!-- minimum value for boundary-layer depth, to setup length scales correctly.
	1901	zi_ribulk = MAX( zi_ribulk, zw(nzb+2) )
	1902	!
	1903	!-- Set-up default turbulent length scales. From the numerical point of
	1904	!-- view the imposed perturbations should not be immediately dissipated
	1905	!-- by the numerics. The numerical dissipation, however, acts on scales
	1906	!-- up to 8 x the grid spacing. For this reason, set the turbulence
	1907	!-- length scale to 8 time the grid spacing. Further, above the boundary
	1908	!-- layer height, set turbulence lenght scales to zero (equivalent to not
	1909	!-- imposing any perturbations) in order to save computational costs.
	1910	!-- Typical time scales are derived by assuming Taylors's hypothesis,
	1911	!-- using the length scales and the mean profiles of u- and v-component.
	1912	DO k = nzb+1, nzt+1
	1913
	1914	length_scale = 8.0_wp * MIN( dx, dy, dzw(k) )
	1915
	1916	IF ( zu(k) <= zi_ribulk ) THEN
	1917	!
	1918	!-- Assume isotropic turbulence length scales
	1919	nux(k) = MAX( INT( length_scale * ddx ), 1 )
	1920	nuy(k) = MAX( INT( length_scale * ddy ), 1 )
	1921	nuz(k) = MAX( INT( length_scale * ddzw(k) ), 1 )
	1922	nvx(k) = MAX( INT( length_scale * ddx ), 1 )
	1923	nvy(k) = MAX( INT( length_scale * ddy ), 1 )
	1924	nvz(k) = MAX( INT( length_scale * ddzw(k) ), 1 )
	1925	nwx(k) = MAX( INT( length_scale * ddx ), 1 )
	1926	nwy(k) = MAX( INT( length_scale * ddy ), 1 )
	1927	nwz(k) = MAX( INT( length_scale * ddzw(k) ), 1 )
	1928	!
	1929	!-- Limit time scales, else they become very larger for low wind speed,
	1930	!-- imposing long-living inflow perturbations which in turn propagate
	1931	!-- further into the model domain. Use u_init and v_init to calculate
	1932	!-- the time scales, which will be equal to the inflow profiles, both,
	1933	!-- in offline nesting mode or in dirichlet/radiation mode.
	1934	tu(k) = MIN( dt_stg_adjust, length_scale / &
	1935	( ABS( u_init(k) ) + 0.1_wp ) )
	1936	tv(k) = MIN( dt_stg_adjust, length_scale / &
	1937	( ABS( v_init(k) ) + 0.1_wp ) )
	1938	!
	1939	!-- Time scale of w-component is a mixture from u- and v-component.
	1940	tw(k) = SQRT( tu(k)2 + tv(k)2 )
	1941	!
	1942	!-- Above the boundary layer length scales are zero, i.e. imposed turbulence
	1943	!-- is not correlated in space and time, just white noise. This saves
	1944	!-- computations power.
	1945	ELSE
	1946	nux(k) = 0.0_wp
	1947	nuy(k) = 0.0_wp
	1948	nuz(k) = 0.0_wp
	1949	nvx(k) = 0.0_wp
	1950	nvy(k) = 0.0_wp
	1951	nvz(k) = 0.0_wp
	1952	nwx(k) = 0.0_wp
	1953	nwy(k) = 0.0_wp
	1954	nwz(k) = 0.0_wp
	1955
	1956	tu(k) = 0.0_wp
	1957	tv(k) = 0.0_wp
	1958	tw(k) = 0.0_wp
	1959	ENDIF
	1960	ENDDO
	1961	!
	1962	!-- Set bottom boundary condition for the length and time scales
	1963	nux(nzb) = nux(nzb+1)
	1964	nuy(nzb) = nuy(nzb+1)
	1965	nuz(nzb) = nuz(nzb+1)
	1966	nvx(nzb) = nvx(nzb+1)
	1967	nvy(nzb) = nvy(nzb+1)
	1968	nvz(nzb) = nvz(nzb+1)
	1969	nwx(nzb) = nwx(nzb+1)
	1970	nwy(nzb) = nwy(nzb+1)
	1971	nwz(nzb) = nwz(nzb+1)
	1972
	1973	tu(nzb) = tu(nzb+1)
	1974	tv(nzb) = tv(nzb+1)
	1975	tw(nzb) = tw(nzb+1)
	1976
	1977
	1978	END SUBROUTINE calc_length_and_time_scale
	1979
	1980	!------------------------------------------------------------------------------!
	1981	! Description:
	1982	! ------------
	1983	!> Calculate scaling variables which are used for turbulence parametrization
	1984	!> according to Rotach et al. (1996). Scaling variables are: friction velocity,
	1985	!> boundary-layer depth, momentum velocity scale, and Obukhov length.
	1986	!------------------------------------------------------------------------------!
	1987	SUBROUTINE calc_scaling_variables
	1988
	1989
	1990	USE control_parameters, &
	1991	ONLY: bc_dirichlet_l, bc_dirichlet_n, bc_dirichlet_r, bc_dirichlet_s, &
	1992	humidity, pt_surface
	1993
	1994	USE indices, &
	1995	ONLY: nx, ny
	1996
	1997	USE surface_mod, &
[3579]	1998	ONLY: get_topography_top_index_ji, surf_def_h, surf_lsm_h, surf_usm_h
[3347]	1999
	2000	IMPLICIT NONE
	2001
	2002	INTEGER(iwp) :: i !< loop index in x-direction
	2003	INTEGER(iwp) :: j !< loop index in y-direction
	2004	INTEGER(iwp) :: k !< loop index in z-direction
[3579]	2005	INTEGER(iwp) :: k_ref !< index in z-direction for COSMO reference height
	2006	INTEGER(iwp) :: k_topo !< topography top index
[3347]	2007	INTEGER(iwp) :: m !< surface element index
	2008
	2009	REAL(wp) :: friction_vel_l !< mean friction veloctiy on subdomain
	2010	REAL(wp) :: shf_mean !< mean surface sensible heat flux
	2011	REAL(wp) :: shf_mean_l !< mean surface sensible heat flux on subdomain
	2012	REAL(wp) :: u_int !< u-component
	2013	REAL(wp) :: v_int !< v-component
	2014	REAL(wp) :: vpt_surface !< near-surface virtual potential temperature
	2015	REAL(wp) :: w_convective !< convective velocity scale
	2016	REAL(wp) :: z0_mean !< mean roughness length
	2017	REAL(wp) :: z0_mean_l !< mean roughness length on subdomain
	2018
	2019	!
	2020	!-- Mean friction velocity and velocity scale. Therefore,
	2021	!-- pre-calculate mean roughness length and surface sensible heat flux
	2022	!-- in the model domain, which are further used to estimate friction
	2023	!-- velocity and velocity scale. Note, for z0 linear averaging is applied,
	2024	!-- even though this is known to unestimate the effective roughness.
	2025	!-- This need to be revised later.
	2026	z0_mean_l = 0.0_wp
	2027	shf_mean_l = 0.0_wp
	2028	DO m = 1, surf_def_h(0)%ns
	2029	z0_mean_l = z0_mean_l + surf_def_h(0)%z0(m)
	2030	shf_mean_l = shf_mean_l + surf_def_h(0)%shf(m)
	2031	ENDDO
	2032	DO m = 1, surf_lsm_h%ns
	2033	z0_mean_l = z0_mean_l + surf_lsm_h%z0(m)
	2034	shf_mean_l = shf_mean_l + surf_lsm_h%shf(m)
	2035	ENDDO
	2036	DO m = 1, surf_usm_h%ns
	2037	z0_mean_l = z0_mean_l + surf_usm_h%z0(m)
	2038	shf_mean_l = shf_mean_l + surf_usm_h%shf(m)
	2039	ENDDO
	2040
	2041	#if defined( __parallel )
	2042	CALL MPI_ALLREDUCE( z0_mean_l, z0_mean, 1, MPI_REAL, MPI_SUM, &
	2043	comm2d, ierr )
	2044	CALL MPI_ALLREDUCE( shf_mean_l, shf_mean, 1, MPI_REAL, MPI_SUM, &
	2045	comm2d, ierr )
	2046	#else
	2047	z0_mean = z0_mean_l
	2048	shf_mean = shf_mean_l
	2049	#endif
	2050	z0_mean = z0_mean / REAL( ( nx + 1 ) * ( ny + 1 ), KIND = wp )
	2051	shf_mean = shf_mean / REAL( ( nx + 1 ) * ( ny + 1 ), KIND = wp )
	2052
	2053	!
	2054	!-- Note, Inifor does not use logarithmic interpolation of the
	2055	!-- velocity components near the ground, so that near-surface
	2056	!-- wind speed and thus the friction velocity is overestimated.
	2057	!-- However, friction velocity is used for turbulence
	2058	!-- parametrization, so that more physically meaningful values are important.
[3579]	2059	!-- Hence, derive friction velocity from wind speed at a reference height,
	2060	!-- which is 10 m, according to the height of the 1st vertical grid level
	2061	!-- in the COSMO level. However, in case of topography that is higher than
	2062	!-- the reference level, the k index is determined from the 1st vertical
	2063	!-- PALM grid level instead.
[3347]	2064	!-- For a first guess use 20 m, which is in the range of the first
	2065	!-- COSMO vertical level.
	2066	k_ref = MINLOC( ABS( zu - cosmo_ref ), DIM = 1 ) - 1
	2067
	2068	friction_vel_l = 0.0_wp
	2069	IF ( bc_dirichlet_l .OR. bc_dirichlet_r ) THEN
	2070
	2071	i = MERGE( -1, nxr + 1, bc_dirichlet_l )
	2072
	2073	DO j = nys, nyn
	2074	!
[3579]	2075	!-- Determine the k index and topography top index
	2076	k_topo = MAX( get_topography_top_index_ji( j, i, 'u' ), &
	2077	get_topography_top_index_ji( j, i, 'v' ) )
	2078	k = MAX( k_ref, k_topo + 1 )
	2079	!
[3347]	2080	!-- Note, in u- and v- component the imposed perturbations
	2081	!-- from the STG are already included. Check whether this
	2082	!-- makes any difference compared to using the pure-mean
	2083	!-- inflow profiles.
[3579]	2084	u_int = MERGE( u(k,j,i+1), u(k,j,i), bc_dirichlet_l )
	2085	v_int = v(k,j,i)
[3347]	2086	!
	2087	!-- Calculate friction velocity and sum-up. Therefore, assume
	2088	!-- neutral condtions.
	2089	friction_vel_l = friction_vel_l + kappa * &
	2090	SQRT( u_int * u_int + v_int * v_int ) / &
[3579]	2091	LOG( ( zu(k) - zu(k_topo) ) / z0_mean )
[3347]	2092
	2093	ENDDO
	2094
	2095	ENDIF
	2096
	2097	IF ( bc_dirichlet_s .OR. bc_dirichlet_n ) THEN
	2098
	2099	j = MERGE( -1, nyn + 1, bc_dirichlet_s )
	2100
	2101	DO i = nxl, nxr
	2102
[3579]	2103	k_topo = MAX( get_topography_top_index_ji( j, i, 'u' ), &
	2104	get_topography_top_index_ji( j, i, 'v' ) )
	2105	k = MAX( k_ref, k_topo + 1 )
	2106
	2107	u_int = u(k,j,i)
	2108	v_int = MERGE( v(k,j+1,i), v(k,j,i), bc_dirichlet_s )
[3347]	2109
	2110	friction_vel_l = friction_vel_l + kappa * &
	2111	SQRT( u_int * u_int + v_int * v_int ) / &
[3579]	2112	LOG( ( zu(k) - zu(k_topo) ) / z0_mean )
[3347]	2113
	2114	ENDDO
	2115
	2116	ENDIF
	2117
	2118	#if defined( __parallel )
	2119	CALL MPI_ALLREDUCE( friction_vel_l, scale_us, 1, MPI_REAL, MPI_SUM, &
	2120	comm2d, ierr )
	2121	#else
	2122	scale_us = friction_vel_l
	2123	#endif
	2124	scale_us = scale_us / REAL( 2 * nx + 2 * ny, KIND = wp )
	2125
	2126	!
	2127	!-- Compute mean Obukhov length
	2128	IF ( shf_mean > 0.0_wp ) THEN
	2129	scale_l = - pt_surface / ( kappa * g ) * scale_us**3 / shf_mean
	2130	ELSE
	2131	scale_l = 0.0_wp
	2132	ENDIF
	2133
	2134	!
	2135	!-- Compute mean convective velocity scale. Note, in case the mean heat flux
	2136	!-- is negative, set convective velocity scale to zero.
	2137	IF ( shf_mean > 0.0_wp ) THEN
	2138	w_convective = ( g * shf_mean * zi_ribulk / pt_surface )**( 1.0_wp / 3.0_wp )
	2139	ELSE
	2140	w_convective = 0.0_wp
	2141	ENDIF
	2142	!
	2143	!-- Finally, in order to consider also neutral or stable stratification,
	2144	!-- compute momentum velocity scale from u* and convective velocity scale,
	2145	!-- according to Rotach et al. (1996).
	2146	scale_wm = ( scale_us*3 + 0.6_wp w_convective3 )( 1.0_wp / 3.0_wp )
	2147
	2148	END SUBROUTINE calc_scaling_variables
	2149
[2259]	2150	END MODULE synthetic_turbulence_generator_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |