source: palm/trunk/SOURCE/surface_coupler.f90 @ 154

 SUBROUTINE surface_coupler

!------------------------------------------------------------------------------!
! Actual revisions:
! -----------------
! 
!
! Former revisions:
! ------------------
! $Id: surface_coupler.f90 110 2007-10-05 05:13:14Z letzel $
!
! 109 2007-08-28 15:26:47Z letzel
! Initial revision
!
! Description:
! ------------
! Data exchange at the interface between coupled models
!------------------------------------------------------------------------------!

    USE arrays_3d
    USE control_parameters
    USE cpulog
    USE grid_variables
    USE indices
    USE interfaces
    USE pegrid

    IMPLICIT NONE

    INTEGER ::  i, j, k

    REAL    ::  simulated_time_remote

#if defined( __parallel )  &&  defined( __mpi2 )

    CALL cpu_log( log_point(39), 'surface_coupler', 'start' )

!
!-- In case of model termination initiated by the remote model 
!-- (terminate_coupled_remote > 0), initiate termination of the local model. 
!-- The rest of the coupler must then be skipped because it would cause an MPI 
!-- intercomminucation hang.
!-- If necessary, the coupler will be called at the beginning of the next 
!-- restart run.
    CALL MPI_SENDRECV( terminate_coupled,        1, MPI_INTEGER, myid,  0, &
                       terminate_coupled_remote, 1, MPI_INTEGER, myid,  0, &
                       comm_inter, status, ierr )
    IF ( terminate_coupled_remote > 0 )  THEN
       IF ( myid == 0 )  THEN
          PRINT*, '+++ surface_coupler:'
          PRINT*, '    remote model "', TRIM( coupling_mode_remote ), &
               '" terminated'
          PRINT*, '    with terminate_coupled_remote = ', &
               terminate_coupled_remote
          PRINT*, '    local model  "', TRIM( coupling_mode ), &
               '" has'
          PRINT*, '    terminate_coupled = ', &
               terminate_coupled
       ENDIF
       CALL local_stop
       RETURN
    ENDIF
!
!-- Exchange the current simulated time between the models,
!-- currently just for testing
    CALL MPI_SEND( simulated_time, 1, MPI_REAL, myid, 11, comm_inter, ierr )
    CALL MPI_RECV( simulated_time_remote, 1, MPI_REAL, myid, 11, &
                   comm_inter, status, ierr )
    WRITE ( 9, * )  simulated_time, ' remote: ', simulated_time_remote
    CALL local_flush( 9 )

!
!-- Exchange the interface data
    IF ( coupling_mode == 'atmosphere_to_ocean' )  THEN

!
!--    Send heat flux at bottom surface to the ocean model
       WRITE ( 9, * )  '*** send shf to ocean'
       CALL local_flush( 9 )
       CALL MPI_SEND( shf(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 12, &
                      comm_inter, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Send humidity flux at bottom surface to the ocean model
       IF ( humidity )  THEN
          WRITE ( 9, * )  '*** send qsws to ocean'
          CALL local_flush( 9 )
          CALL MPI_SEND( qsws(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 13, &
               comm_inter, ierr )
          WRITE ( 9, * )  '    ready'
          CALL local_flush( 9 )
       ENDIF

!
!--    Receive temperature at the bottom surface from the ocean model
       WRITE ( 9, * )  '*** receive pt from ocean'
       CALL local_flush( 9 )
       CALL MPI_RECV( pt(0,nys-1,nxl-1), 1, type_xy, myid, 14, comm_inter, &
                      status, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Send the momentum flux (u) at bottom surface to the ocean model
       WRITE ( 9, * )  '*** send usws to ocean'
       CALL local_flush( 9 )
       CALL MPI_SEND( usws(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 15, &
                      comm_inter, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Send the momentum flux (v) at bottom surface to the ocean model
       WRITE ( 9, * )  '*** send vsws to ocean'
       CALL local_flush( 9 )
       CALL MPI_SEND( vsws(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 16, &
                      comm_inter, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

    ELSEIF ( coupling_mode == 'ocean_to_atmosphere' )  THEN

!
!--    Receive heat flux at the sea surface (top) from the atmosphere model
       WRITE ( 9, * )  '*** receive tswst from atmosphere'
       CALL local_flush( 9 )
       CALL MPI_RECV( tswst(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 12, &
                      comm_inter, status, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Receive humidity flux from the atmosphere model (bottom)
!--    and add it to the heat flux at the sea surface (top)...
       IF ( humidity_remote )  THEN
          WRITE ( 9, * )  '*** receive qswst_remote from atmosphere'
          CALL local_flush( 9 )
          CALL MPI_RECV( qswst_remote(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, &
               13, comm_inter, status, ierr )
          WRITE ( 9, * )  '    ready'
          CALL local_flush( 9 )

          !here tswst is still the sum of atmospheric bottom heat fluxes
          tswst = tswst + qswst_remote * 2.2626108e6 / 1005.0
          !*latent heat of vaporization in m2/s2, or 540 cal/g, or 40.65 kJ/mol
          !/(rho_atm(=1.0)*c_p)
!
!--    ...and convert it to a salinity flux at the sea surface (top)
!--       following Steinhorn (1991), JPO 21, pp. 1681-1683:
!--       S'w' = -S * evaporation / ( rho_water * ( 1 - S ) )
          saswst = -1.0 * sa(nzt,:,:) * qswst_remote /  &
               ( rho(nzt,:,:) * ( 1.0 - sa(nzt,:,:) ) )
       ENDIF

!
!--    Adjust the kinematic heat flux with respect to ocean density
!--    (constants are the specific heat capacities for air and water)
       !now tswst is the ocean top heat flux
       tswst = tswst / rho(nzt,:,:) * 1005.0 / 4218.0

!
!--    Send sea surface temperature to the atmosphere model
       WRITE ( 9, * )  '*** send pt to atmosphere'
       CALL local_flush( 9 )
       CALL MPI_SEND( pt(nzt,nys-1,nxl-1), 1, type_xy, myid, 14, comm_inter, &
                      ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Receive momentum flux (u) at the sea surface (top) from the atmosphere
!--    model
       WRITE ( 9, * )  '*** receive uswst from atmosphere'
       CALL local_flush( 9 )
       CALL MPI_RECV( uswst(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 15, &
                      comm_inter, status, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Receive momentum flux (v) at the sea surface (top) from the atmosphere
!--    model
       WRITE ( 9, * )  '*** receive vswst from atmosphere'
       CALL local_flush( 9 )
       CALL MPI_RECV( vswst(nys-1,nxl-1), ngp_xy, MPI_REAL, myid, 16, &
                      comm_inter, status, ierr )
       WRITE ( 9, * )  '    ready'
       CALL local_flush( 9 )

!
!--    Adjust the momentum fluxes with respect to ocean density
       uswst = uswst / rho(nzt,:,:)
       vswst = vswst / rho(nzt,:,:)

    ENDIF

    CALL cpu_log( log_point(39), 'surface_coupler', 'stop' )

#endif

 END SUBROUTINE surface_coupler