Home

Context Navigation

source: palm/trunk/SOURCE/sum_up_3d_data.f90 @ 2995

Last change on this file since 2995 was 2963, checked in by suehring, 7 years ago
Minor revision of static input file checks, bugfix in initialization of surface-fractions in LSM; minor bugfix in initialization of albedo at window-surfaces; for clearer access of albedo and emissivity introduce index for vegetation/wall, pavement/green-wall and water/window surfaces
Property svn:keywords set to `Id`
File size: 37.7 KB

Line
1	!> @file sum_up_3d_data.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2018 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: sum_up_3d_data.f90 2963 2018-04-12 14:47:44Z Giersch $
27	! Introduce index for vegetation/wall, pavement/green-wall and water/window
28	! surfaces, for clearer access of surface fraction, albedo, emissivity, etc. .
29	!
30	! 2894 2018-03-15 09:17:58Z Giersch
31	! Changed comment
32	!
33	! 2817 2018-02-19 16:32:21Z suehring
34	! Preliminary gust module interface implemented
35	!
36	! 2798 2018-02-09 17:16:39Z suehring
37	! Consider also default-type surfaces for surface temperature output.
38	!
39	! 2797 2018-02-08 13:24:35Z suehring
40	! Enable output of ground-heat flux also at urban surfaces.
41	!
42	! 2790 2018-02-06 11:57:19Z suehring
43	! Bugfix in summation of surface sensible and latent heat flux
44	!
45	! 2766 2018-01-22 17:17:47Z kanani
46	! Removed preprocessor directive __chem
47	!
48	! 2743 2018-01-12 16:03:39Z suehring
49	! In case of natural- and urban-type surfaces output surfaces fluxes in W/m2.
50	!
51	! 2742 2018-01-12 14:59:47Z suehring
52	! Enable output of surface temperature
53	!
54	! 2735 2018-01-11 12:01:27Z suehring
55	! output of r_a moved from land-surface to consider also urban-type surfaces
56	!
57	! 2718 2018-01-02 08:49:38Z maronga
58	! Corrected "Former revisions" section
59	!
60	! 2696 2017-12-14 17:12:51Z kanani
61	! - Change in file header (GPL part)
62	! - Implementation of uv exposure model (FK)
63	! - output of diss_av, kh_av, km_av (turbulence_closure_mod) (TG)
64	! - Implementation of chemistry module (FK)
65	! - Workaround for sum-up usm arrays in case of restart runs, to avoid program
66	! crash (MS)
67	!
68	! 2292 2017-06-20 09:51:42Z schwenkel
69	! Implementation of new microphysic scheme: cloud_scheme = 'morrison'
70	! includes two more prognostic equations for cloud drop concentration (nc)
71	! and cloud water content (qc).
72	!
73	! 2233 2017-05-30 18:08:54Z suehring
74	!
75	! 2232 2017-05-30 17:47:52Z suehring
76	! Adjustments to new surface concept
77	!
78	! 2031 2016-10-21 15:11:58Z knoop
79	! renamed variable rho to rho_ocean and rho_av to rho_ocean_av
80	!
81	! 2024 2016-10-12 16:42:37Z kanani
82	! Added missing CASE for ssws*
83	!
84	! 2011 2016-09-19 17:29:57Z kanani
85	! Flag urban_surface is now defined in module control_parameters,
86	! changed prefix for urban surface model output to "usm_",
87	! introduced control parameter varnamelength for LEN of trimvar.
88	!
89	! 2007 2016-08-24 15:47:17Z kanani
90	! Added support for new urban surface model (temporary modifications of
91	! SELECT CASE ( ) necessary, see variable trimvar),
92	! added comments in variable declaration section
93	!
94	! 2000 2016-08-20 18:09:15Z knoop
95	! Forced header and separation lines into 80 columns
96	!
97	! 1992 2016-08-12 15:14:59Z suehring
98	! Bugfix in summation of passive scalar
99	!
100	! 1976 2016-07-27 13:28:04Z maronga
101	! Radiation actions are now done directly in the respective module
102	!
103	! 1972 2016-07-26 07:52:02Z maronga
104	! Land surface actions are now done directly in the respective module
105	!
106	! 1960 2016-07-12 16:34:24Z suehring
107	! Scalar surface flux added
108	!
109	! 1949 2016-06-17 07:19:16Z maronga
110	! Bugfix: calculation of lai_av, c_veg_av and c_liq_av.
111	!
112	! 1849 2016-04-08 11:33:18Z hoffmann
113	! precipitation_rate moved to arrays_3d
114	!
115	! 1788 2016-03-10 11:01:04Z maronga
116	! Added z0q and z0q_av
117	!
118	! 1693 2015-10-27 08:35:45Z maronga
119	! Last revision text corrected
120	!
121	! 1691 2015-10-26 16:17:44Z maronga
122	! Added output of Obukhov length and radiative heating rates for RRTMG.
123	! Corrected output of liquid water path.
124	!
125	! 1682 2015-10-07 23:56:08Z knoop
126	! Code annotations made doxygen readable
127	!
128	! 1585 2015-04-30 07:05:52Z maronga
129	! Adapted for RRTMG
130	!
131	! 1555 2015-03-04 17:44:27Z maronga
132	! Added output of r_a and r_s
133	!
134	! 1551 2015-03-03 14:18:16Z maronga
135	! Added support for land surface model and radiation model data.
136	!
137	! 1359 2014-04-11 17:15:14Z hoffmann
138	! New particle structure integrated.
139	!
140	! 1353 2014-04-08 15:21:23Z heinze
141	! REAL constants provided with KIND-attribute
142	!
143	! 1320 2014-03-20 08:40:49Z raasch
144	! ONLY-attribute added to USE-statements,
145	! kind-parameters added to all INTEGER and REAL declaration statements,
146	! kinds are defined in new module kinds,
147	! old module precision_kind is removed,
148	! revision history before 2012 removed,
149	! comment fields (!:) to be used for variable explanations added to
150	! all variable declaration statements
151	!
152	! 1318 2014-03-17 13:35:16Z raasch
153	! barrier argument removed from cpu_log,
154	! module interfaces removed
155	!
156	! 1115 2013-03-26 18:16:16Z hoffmann
157	! ql is calculated by calc_liquid_water_content
158	!
159	! 1053 2012-11-13 17:11:03Z hoffmann
160	! +nr, prr, qr
161	!
162	! 1036 2012-10-22 13:43:42Z raasch
163	! code put under GPL (PALM 3.9)
164	!
165	! 1007 2012-09-19 14:30:36Z franke
166	! Bugfix in calculation of ql_vp
167	!
168	! 978 2012-08-09 08:28:32Z fricke
169	! +z0h*
170	!
171	! Revision 1.1 2006/02/23 12:55:23 raasch
172	! Initial revision
173	!
174	!
175	! Description:
176	! ------------
177	!> Sum-up the values of 3d-arrays. The real averaging is later done in routine
178	!> average_3d_data.
179	!------------------------------------------------------------------------------!
180	SUBROUTINE sum_up_3d_data
181
182
183	USE arrays_3d, &
184	ONLY: dzw, e, heatflux_output_conversion, nc, nr, p, pt, &
185	precipitation_rate, q, qc, ql, ql_c, &
186	ql_v, qr, rho_ocean, s, sa, u, v, vpt, w, &
187	waterflux_output_conversion
188
189	USE averaging, &
190	ONLY: diss_av, e_av, ghf_av, kh_av, km_av, lpt_av, lwp_av, nc_av, &
191	nr_av, &
192	ol_av, p_av, pc_av, pr_av, prr_av, precipitation_rate_av, pt_av,&
193	q_av, qc_av, ql_av, ql_c_av, ql_v_av, ql_vp_av, qr_av, qsws_av, &
194	qv_av, r_a_av, rho_ocean_av, s_av, sa_av, shf_av, ssws_av, &
195	ts_av, tsurf_av, u_av, us_av, v_av, vpt_av, w_av, z0_av, z0h_av,&
196	z0q_av
197	USE chemistry_model_mod, &
198	ONLY: chem_3d_data_averaging, chem_integrate, chem_species, nspec
199
200	USE cloud_parameters, &
201	ONLY: cp, l_d_cp, l_v, pt_d_t
202
203	USE control_parameters, &
204	ONLY: air_chemistry, average_count_3d, cloud_physics, doav, doav_n, &
205	land_surface, rho_surface, urban_surface, uv_exposure, &
206	varnamelength
207
208	USE cpulog, &
209	ONLY: cpu_log, log_point
210
211	USE gust_mod, &
212	ONLY: gust_3d_data_averaging, gust_module_enabled
213
214	USE indices, &
215	ONLY: nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt
216
217	USE kinds
218
219	USE land_surface_model_mod, &
220	ONLY: lsm_3d_data_averaging
221
222	USE particle_attributes, &
223	ONLY: grid_particles, number_of_particles, particles, prt_count
224
225	USE radiation_model_mod, &
226	ONLY: radiation, radiation_3d_data_averaging
227
228	USE surface_mod, &
229	ONLY: ind_pav_green, ind_veg_wall, ind_wat_win, &
230	surf_def_h, surf_lsm_h, surf_usm_h
231
232	USE turbulence_closure_mod, &
233	ONLY: tcm_3d_data_averaging
234
235	USE urban_surface_mod, &
236	ONLY: usm_average_3d_data
237
238	USE uv_exposure_model_mod, &
239	ONLY: uvem_3d_data_averaging
240
241
242	IMPLICIT NONE
243
244	INTEGER(iwp) :: i !< grid index x direction
245	INTEGER(iwp) :: ii !< running index
246	INTEGER(iwp) :: j !< grid index y direction
247	INTEGER(iwp) :: k !< grid index x direction
248	INTEGER(iwp) :: m !< running index surface type
249	INTEGER(iwp) :: n !<
250
251	REAL(wp) :: mean_r !<
252	REAL(wp) :: s_r2 !<
253	REAL(wp) :: s_r3 !<
254
255	CHARACTER (LEN=varnamelength) :: trimvar !< TRIM of output-variable string
256
257
258	CALL cpu_log (log_point(34),'sum_up_3d_data','start')
259
260	!
261	!-- Allocate and initialize the summation arrays if called for the very first
262	!-- time or the first time after average_3d_data has been called
263	!-- (some or all of the arrays may have been already allocated
264	!-- in rrd_local)
265	IF ( average_count_3d == 0 ) THEN
266
267	DO ii = 1, doav_n
268	!
269	!-- Temporary solution to account for data output within the new urban
270	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
271	trimvar = TRIM( doav(ii) )
272	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
273	trimvar = 'usm_output'
274	ENDIF
275
276	SELECT CASE ( trimvar )
277
278	CASE ( 'ghf*' )
279	IF ( .NOT. ALLOCATED( ghf_av ) ) THEN
280	ALLOCATE( ghf_av(nysg:nyng,nxlg:nxrg) )
281	ENDIF
282	ghf_av = 0.0_wp
283
284	CASE ( 'e' )
285	IF ( .NOT. ALLOCATED( e_av ) ) THEN
286	ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
287	ENDIF
288	e_av = 0.0_wp
289
290	CASE ( 'lpt' )
291	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
292	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
293	ENDIF
294	lpt_av = 0.0_wp
295
296	CASE ( 'lwp*' )
297	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
298	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
299	ENDIF
300	lwp_av = 0.0_wp
301
302	CASE ( 'nc' )
303	IF ( .NOT. ALLOCATED( nc_av ) ) THEN
304	ALLOCATE( nc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
305	ENDIF
306	nc_av = 0.0_wp
307
308	CASE ( 'nr' )
309	IF ( .NOT. ALLOCATED( nr_av ) ) THEN
310	ALLOCATE( nr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
311	ENDIF
312	nr_av = 0.0_wp
313
314	CASE ( 'ol*' )
315	IF ( .NOT. ALLOCATED( ol_av ) ) THEN
316	ALLOCATE( ol_av(nysg:nyng,nxlg:nxrg) )
317	ENDIF
318	ol_av = 0.0_wp
319
320	CASE ( 'p' )
321	IF ( .NOT. ALLOCATED( p_av ) ) THEN
322	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
323	ENDIF
324	p_av = 0.0_wp
325
326	CASE ( 'pc' )
327	IF ( .NOT. ALLOCATED( pc_av ) ) THEN
328	ALLOCATE( pc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
329	ENDIF
330	pc_av = 0.0_wp
331
332	CASE ( 'pr' )
333	IF ( .NOT. ALLOCATED( pr_av ) ) THEN
334	ALLOCATE( pr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
335	ENDIF
336	pr_av = 0.0_wp
337
338	CASE ( 'prr' )
339	IF ( .NOT. ALLOCATED( prr_av ) ) THEN
340	ALLOCATE( prr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
341	ENDIF
342	prr_av = 0.0_wp
343
344	CASE ( 'prr*' )
345	IF ( .NOT. ALLOCATED( precipitation_rate_av ) ) THEN
346	ALLOCATE( precipitation_rate_av(nysg:nyng,nxlg:nxrg) )
347	ENDIF
348	precipitation_rate_av = 0.0_wp
349
350	CASE ( 'pt' )
351	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
352	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
353	ENDIF
354	pt_av = 0.0_wp
355
356	CASE ( 'q' )
357	IF ( .NOT. ALLOCATED( q_av ) ) THEN
358	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
359	ENDIF
360	q_av = 0.0_wp
361
362	CASE ( 'qc' )
363	IF ( .NOT. ALLOCATED( qc_av ) ) THEN
364	ALLOCATE( qc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
365	ENDIF
366	qc_av = 0.0_wp
367
368	CASE ( 'ql' )
369	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
370	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
371	ENDIF
372	ql_av = 0.0_wp
373
374	CASE ( 'ql_c' )
375	IF ( .NOT. ALLOCATED( ql_c_av ) ) THEN
376	ALLOCATE( ql_c_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
377	ENDIF
378	ql_c_av = 0.0_wp
379
380	CASE ( 'ql_v' )
381	IF ( .NOT. ALLOCATED( ql_v_av ) ) THEN
382	ALLOCATE( ql_v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
383	ENDIF
384	ql_v_av = 0.0_wp
385
386	CASE ( 'ql_vp' )
387	IF ( .NOT. ALLOCATED( ql_vp_av ) ) THEN
388	ALLOCATE( ql_vp_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
389	ENDIF
390	ql_vp_av = 0.0_wp
391
392	CASE ( 'qr' )
393	IF ( .NOT. ALLOCATED( qr_av ) ) THEN
394	ALLOCATE( qr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
395	ENDIF
396	qr_av = 0.0_wp
397
398	CASE ( 'qsws*' )
399	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
400	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
401	ENDIF
402	qsws_av = 0.0_wp
403
404	CASE ( 'qv' )
405	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
406	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
407	ENDIF
408	qv_av = 0.0_wp
409
410	CASE ( 'r_a*' )
411	IF ( .NOT. ALLOCATED( r_a_av ) ) THEN
412	ALLOCATE( r_a_av(nysg:nyng,nxlg:nxrg) )
413	ENDIF
414	r_a_av = 0.0_wp
415
416	CASE ( 'rho_ocean' )
417	IF ( .NOT. ALLOCATED( rho_ocean_av ) ) THEN
418	ALLOCATE( rho_ocean_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
419	ENDIF
420	rho_ocean_av = 0.0_wp
421
422	CASE ( 's' )
423	IF ( .NOT. ALLOCATED( s_av ) ) THEN
424	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
425	ENDIF
426	s_av = 0.0_wp
427
428	CASE ( 'sa' )
429	IF ( .NOT. ALLOCATED( sa_av ) ) THEN
430	ALLOCATE( sa_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
431	ENDIF
432	sa_av = 0.0_wp
433
434	CASE ( 'shf*' )
435	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
436	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
437	ENDIF
438	shf_av = 0.0_wp
439
440	CASE ( 'ssws*' )
441	IF ( .NOT. ALLOCATED( ssws_av ) ) THEN
442	ALLOCATE( ssws_av(nysg:nyng,nxlg:nxrg) )
443	ENDIF
444	ssws_av = 0.0_wp
445
446	CASE ( 't*' )
447	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
448	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
449	ENDIF
450	ts_av = 0.0_wp
451
452	CASE ( 'tsurf*' )
453	IF ( .NOT. ALLOCATED( tsurf_av ) ) THEN
454	ALLOCATE( tsurf_av(nysg:nyng,nxlg:nxrg) )
455	ENDIF
456	tsurf_av = 0.0_wp
457
458	CASE ( 'u' )
459	IF ( .NOT. ALLOCATED( u_av ) ) THEN
460	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
461	ENDIF
462	u_av = 0.0_wp
463
464	CASE ( 'u*' )
465	IF ( .NOT. ALLOCATED( us_av ) ) THEN
466	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
467	ENDIF
468	us_av = 0.0_wp
469
470	CASE ( 'v' )
471	IF ( .NOT. ALLOCATED( v_av ) ) THEN
472	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
473	ENDIF
474	v_av = 0.0_wp
475
476	CASE ( 'vpt' )
477	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
478	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
479	ENDIF
480	vpt_av = 0.0_wp
481
482	CASE ( 'w' )
483	IF ( .NOT. ALLOCATED( w_av ) ) THEN
484	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
485	ENDIF
486	w_av = 0.0_wp
487
488	CASE ( 'z0*' )
489	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
490	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
491	ENDIF
492	z0_av = 0.0_wp
493
494	CASE ( 'z0h*' )
495	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
496	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
497	ENDIF
498	z0h_av = 0.0_wp
499
500	CASE ( 'z0q*' )
501	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
502	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
503	ENDIF
504	z0q_av = 0.0_wp
505	!
506	!-- Block of urban surface model outputs
507	CASE ( 'usm_output' )
508
509	CALL usm_average_3d_data( 'allocate', doav(ii) )
510
511
512	CASE DEFAULT
513
514	!
515	!-- Turbulence closure module
516	CALL tcm_3d_data_averaging( 'allocate', doav(ii) )
517
518	!
519	!-- Land surface quantity
520	IF ( land_surface ) THEN
521	CALL lsm_3d_data_averaging( 'allocate', doav(ii) )
522	ENDIF
523
524	!
525	!-- Radiation quantity
526	IF ( radiation ) THEN
527	CALL radiation_3d_data_averaging( 'allocate', doav(ii) )
528	ENDIF
529
530	!
531	!-- Gust module quantities
532	IF ( gust_module_enabled ) THEN
533	CALL gust_3d_data_averaging( 'allocate', doav(ii) )
534	ENDIF
535
536	!
537	!-- Chemical quantity
538	#if defined( __chem )
539	IF ( air_chemistry .AND. trimvar(1:3) == 'kc_') THEN
540	CALL chem_3d_data_averaging( 'allocate', doav(ii) )
541	ENDIF
542	#endif
543
544	!
545	!-- UV exposure quantity
546	IF ( uv_exposure .AND. trimvar(1:5) == 'uvem_') THEN
547	CALL uvem_3d_data_averaging( 'allocate', doav(ii) )
548	ENDIF
549
550	!
551	!-- User-defined quantity
552	CALL user_3d_data_averaging( 'allocate', doav(ii) )
553
554	END SELECT
555
556	ENDDO
557
558	ENDIF
559
560	!
561	!-- Loop of all variables to be averaged.
562	DO ii = 1, doav_n
563	!
564	!-- Temporary solution to account for data output within the new urban
565	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
566	trimvar = TRIM( doav(ii) )
567	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
568	trimvar = 'usm_output'
569	ENDIF
570	!
571	!-- Store the array chosen on the temporary array.
572	SELECT CASE ( trimvar )
573
574	CASE ( 'ghf*' )
575	DO m = 1, surf_lsm_h%ns
576	i = surf_lsm_h%i(m)
577	j = surf_lsm_h%j(m)
578	ghf_av(j,i) = ghf_av(j,i) + surf_lsm_h%ghf(m)
579	ENDDO
580
581	DO m = 1, surf_usm_h%ns
582	i = surf_usm_h%i(m)
583	j = surf_usm_h%j(m)
584	ghf_av(j,i) = ghf_av(j,i) + surf_usm_h%frac(ind_veg_wall,m) * &
585	surf_usm_h%wghf_eb(m) + &
586	surf_usm_h%frac(ind_pav_green,m) * &
587	surf_usm_h%wghf_eb_green(m) + &
588	surf_usm_h%frac(ind_wat_win,m) * &
589	surf_usm_h%wghf_eb_window(m)
590	ENDDO
591
592	CASE ( 'e' )
593	DO i = nxlg, nxrg
594	DO j = nysg, nyng
595	DO k = nzb, nzt+1
596	e_av(k,j,i) = e_av(k,j,i) + e(k,j,i)
597	ENDDO
598	ENDDO
599	ENDDO
600
601	CASE ( 'lpt' )
602	DO i = nxlg, nxrg
603	DO j = nysg, nyng
604	DO k = nzb, nzt+1
605	lpt_av(k,j,i) = lpt_av(k,j,i) + pt(k,j,i)
606	ENDDO
607	ENDDO
608	ENDDO
609
610	CASE ( 'lwp*' )
611	DO i = nxlg, nxrg
612	DO j = nysg, nyng
613	lwp_av(j,i) = lwp_av(j,i) + SUM( ql(nzb:nzt,j,i) &
614	* dzw(1:nzt+1) ) * rho_surface
615	ENDDO
616	ENDDO
617
618	CASE ( 'nc' )
619	DO i = nxlg, nxrg
620	DO j = nysg, nyng
621	DO k = nzb, nzt+1
622	nc_av(k,j,i) = nc_av(k,j,i) + nc(k,j,i)
623	ENDDO
624	ENDDO
625	ENDDO
626
627	CASE ( 'nr' )
628	DO i = nxlg, nxrg
629	DO j = nysg, nyng
630	DO k = nzb, nzt+1
631	nr_av(k,j,i) = nr_av(k,j,i) + nr(k,j,i)
632	ENDDO
633	ENDDO
634	ENDDO
635
636	CASE ( 'ol*' )
637	DO m = 1, surf_def_h(0)%ns
638	i = surf_def_h(0)%i(m)
639	j = surf_def_h(0)%j(m)
640	ol_av(j,i) = ol_av(j,i) + surf_def_h(0)%ol(m)
641	ENDDO
642	DO m = 1, surf_lsm_h%ns
643	i = surf_lsm_h%i(m)
644	j = surf_lsm_h%j(m)
645	ol_av(j,i) = ol_av(j,i) + surf_lsm_h%ol(m)
646	ENDDO
647	DO m = 1, surf_usm_h%ns
648	i = surf_usm_h%i(m)
649	j = surf_usm_h%j(m)
650	ol_av(j,i) = ol_av(j,i) + surf_usm_h%ol(m)
651	ENDDO
652
653	CASE ( 'p' )
654	DO i = nxlg, nxrg
655	DO j = nysg, nyng
656	DO k = nzb, nzt+1
657	p_av(k,j,i) = p_av(k,j,i) + p(k,j,i)
658	ENDDO
659	ENDDO
660	ENDDO
661
662	CASE ( 'pc' )
663	DO i = nxl, nxr
664	DO j = nys, nyn
665	DO k = nzb, nzt+1
666	pc_av(k,j,i) = pc_av(k,j,i) + prt_count(k,j,i)
667	ENDDO
668	ENDDO
669	ENDDO
670
671	CASE ( 'pr' )
672	DO i = nxl, nxr
673	DO j = nys, nyn
674	DO k = nzb, nzt+1
675	number_of_particles = prt_count(k,j,i)
676	IF ( number_of_particles <= 0 ) CYCLE
677	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
678	s_r2 = 0.0_wp
679	s_r3 = 0.0_wp
680
681	DO n = 1, number_of_particles
682	IF ( particles(n)%particle_mask ) THEN
683	s_r2 = s_r2 + particles(n)%radius*2 &
684	particles(n)%weight_factor
685	s_r3 = s_r3 + particles(n)%radius*3 &
686	particles(n)%weight_factor
687	ENDIF
688	ENDDO
689
690	IF ( s_r2 > 0.0_wp ) THEN
691	mean_r = s_r3 / s_r2
692	ELSE
693	mean_r = 0.0_wp
694	ENDIF
695	pr_av(k,j,i) = pr_av(k,j,i) + mean_r
696	ENDDO
697	ENDDO
698	ENDDO
699
700
701	CASE ( 'pr*' )
702	DO i = nxlg, nxrg
703	DO j = nysg, nyng
704	precipitation_rate_av(j,i) = precipitation_rate_av(j,i) + &
705	precipitation_rate(j,i)
706	ENDDO
707	ENDDO
708
709	CASE ( 'pt' )
710	IF ( .NOT. cloud_physics ) THEN
711	DO i = nxlg, nxrg
712	DO j = nysg, nyng
713	DO k = nzb, nzt+1
714	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i)
715	ENDDO
716	ENDDO
717	ENDDO
718	ELSE
719	DO i = nxlg, nxrg
720	DO j = nysg, nyng
721	DO k = nzb, nzt+1
722	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i) + l_d_cp * &
723	pt_d_t(k) * ql(k,j,i)
724	ENDDO
725	ENDDO
726	ENDDO
727	ENDIF
728
729	CASE ( 'q' )
730	DO i = nxlg, nxrg
731	DO j = nysg, nyng
732	DO k = nzb, nzt+1
733	q_av(k,j,i) = q_av(k,j,i) + q(k,j,i)
734	ENDDO
735	ENDDO
736	ENDDO
737
738	CASE ( 'qc' )
739	DO i = nxlg, nxrg
740	DO j = nysg, nyng
741	DO k = nzb, nzt+1
742	qc_av(k,j,i) = qc_av(k,j,i) + qc(k,j,i)
743	ENDDO
744	ENDDO
745	ENDDO
746
747	CASE ( 'ql' )
748	DO i = nxlg, nxrg
749	DO j = nysg, nyng
750	DO k = nzb, nzt+1
751	ql_av(k,j,i) = ql_av(k,j,i) + ql(k,j,i)
752	ENDDO
753	ENDDO
754	ENDDO
755
756	CASE ( 'ql_c' )
757	DO i = nxlg, nxrg
758	DO j = nysg, nyng
759	DO k = nzb, nzt+1
760	ql_c_av(k,j,i) = ql_c_av(k,j,i) + ql_c(k,j,i)
761	ENDDO
762	ENDDO
763	ENDDO
764
765	CASE ( 'ql_v' )
766	DO i = nxlg, nxrg
767	DO j = nysg, nyng
768	DO k = nzb, nzt+1
769	ql_v_av(k,j,i) = ql_v_av(k,j,i) + ql_v(k,j,i)
770	ENDDO
771	ENDDO
772	ENDDO
773
774	CASE ( 'ql_vp' )
775	DO i = nxl, nxr
776	DO j = nys, nyn
777	DO k = nzb, nzt+1
778	number_of_particles = prt_count(k,j,i)
779	IF ( number_of_particles <= 0 ) CYCLE
780	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
781	DO n = 1, number_of_particles
782	IF ( particles(n)%particle_mask ) THEN
783	ql_vp_av(k,j,i) = ql_vp_av(k,j,i) + &
784	particles(n)%weight_factor / &
785	number_of_particles
786	ENDIF
787	ENDDO
788	ENDDO
789	ENDDO
790	ENDDO
791
792	CASE ( 'qr' )
793	DO i = nxlg, nxrg
794	DO j = nysg, nyng
795	DO k = nzb, nzt+1
796	qr_av(k,j,i) = qr_av(k,j,i) + qr(k,j,i)
797	ENDDO
798	ENDDO
799	ENDDO
800
801	CASE ( 'qsws*' )
802	!
803	!-- In case of default surfaces, clean-up flux by density.
804	!-- In case of land- and urban-surfaces, convert fluxes into
805	!-- dynamic units.
806	DO m = 1, surf_def_h(0)%ns
807	i = surf_def_h(0)%i(m)
808	j = surf_def_h(0)%j(m)
809	k = surf_def_h(0)%k(m)
810	qsws_av(j,i) = qsws_av(j,i) + surf_def_h(0)%qsws(m) * &
811	waterflux_output_conversion(k)
812	ENDDO
813	DO m = 1, surf_lsm_h%ns
814	i = surf_lsm_h%i(m)
815	j = surf_lsm_h%j(m)
816	qsws_av(j,i) = qsws_av(j,i) + surf_lsm_h%qsws(m) * l_v
817	ENDDO
818	DO m = 1, surf_usm_h%ns
819	i = surf_usm_h%i(m)
820	j = surf_usm_h%j(m)
821	qsws_av(j,i) = qsws_av(j,i) + surf_usm_h%qsws(m) * l_v
822	ENDDO
823
824	CASE ( 'qv' )
825	DO i = nxlg, nxrg
826	DO j = nysg, nyng
827	DO k = nzb, nzt+1
828	qv_av(k,j,i) = qv_av(k,j,i) + q(k,j,i) - ql(k,j,i)
829	ENDDO
830	ENDDO
831	ENDDO
832
833	CASE ( 'r_a*' )
834	DO m = 1, surf_lsm_h%ns
835	i = surf_lsm_h%i(m)
836	j = surf_lsm_h%j(m)
837	r_a_av(j,i) = r_a_av(j,i) + surf_lsm_h%r_a(m)
838	ENDDO
839	!
840	!-- Please note, resistance is also applied at urban-type surfaces,
841	!-- and is output only as a single variable. Here, tile approach is
842	!-- already implemented, so for each surface fraction resistance
843	!-- need to be summed-up.
844	DO m = 1, surf_usm_h%ns
845	i = surf_usm_h%i(m)
846	j = surf_usm_h%j(m)
847	r_a_av(j,i) = r_a_av(j,i) + &
848	( surf_usm_h%frac(ind_veg_wall,m) * &
849	surf_usm_h%r_a(m) + &
850	surf_usm_h%frac(ind_pav_green,m) * &
851	surf_usm_h%r_a_green(m) + &
852	surf_usm_h%frac(ind_wat_win,m) * &
853	surf_usm_h%r_a_window(m) )
854	ENDDO
855
856	CASE ( 'rho_ocean' )
857	DO i = nxlg, nxrg
858	DO j = nysg, nyng
859	DO k = nzb, nzt+1
860	rho_ocean_av(k,j,i) = rho_ocean_av(k,j,i) + rho_ocean(k,j,i)
861	ENDDO
862	ENDDO
863	ENDDO
864
865	CASE ( 's' )
866	DO i = nxlg, nxrg
867	DO j = nysg, nyng
868	DO k = nzb, nzt+1
869	s_av(k,j,i) = s_av(k,j,i) + s(k,j,i)
870	ENDDO
871	ENDDO
872	ENDDO
873
874	CASE ( 'sa' )
875	DO i = nxlg, nxrg
876	DO j = nysg, nyng
877	DO k = nzb, nzt+1
878	sa_av(k,j,i) = sa_av(k,j,i) + sa(k,j,i)
879	ENDDO
880	ENDDO
881	ENDDO
882
883	CASE ( 'shf*' )
884	!
885	!-- In case of default surfaces, clean-up flux by density.
886	!-- In case of land- and urban-surfaces, convert fluxes into
887	!-- dynamic units.
888	DO m = 1, surf_def_h(0)%ns
889	i = surf_def_h(0)%i(m)
890	j = surf_def_h(0)%j(m)
891	k = surf_def_h(0)%k(m)
892	shf_av(j,i) = shf_av(j,i) + surf_def_h(0)%shf(m) * &
893	heatflux_output_conversion(k)
894	ENDDO
895	DO m = 1, surf_lsm_h%ns
896	i = surf_lsm_h%i(m)
897	j = surf_lsm_h%j(m)
898	shf_av(j,i) = shf_av(j,i) + surf_lsm_h%shf(m) * cp
899	ENDDO
900	DO m = 1, surf_usm_h%ns
901	i = surf_usm_h%i(m)
902	j = surf_usm_h%j(m)
903	shf_av(j,i) = shf_av(j,i) + surf_usm_h%shf(m) * cp
904	ENDDO
905
906	CASE ( 'ssws*' )
907	DO m = 1, surf_def_h(0)%ns
908	i = surf_def_h(0)%i(m)
909	j = surf_def_h(0)%j(m)
910	ssws_av(j,i) = ssws_av(j,i) + surf_def_h(0)%ssws(m)
911	ENDDO
912	DO m = 1, surf_lsm_h%ns
913	i = surf_lsm_h%i(m)
914	j = surf_lsm_h%j(m)
915	ssws_av(j,i) = ssws_av(j,i) + surf_lsm_h%ssws(m)
916	ENDDO
917	DO m = 1, surf_usm_h%ns
918	i = surf_usm_h%i(m)
919	j = surf_usm_h%j(m)
920	ssws_av(j,i) = ssws_av(j,i) + surf_usm_h%ssws(m)
921	ENDDO
922
923	CASE ( 't*' )
924	DO m = 1, surf_def_h(0)%ns
925	i = surf_def_h(0)%i(m)
926	j = surf_def_h(0)%j(m)
927	ts_av(j,i) = ts_av(j,i) + surf_def_h(0)%ts(m)
928	ENDDO
929	DO m = 1, surf_lsm_h%ns
930	i = surf_lsm_h%i(m)
931	j = surf_lsm_h%j(m)
932	ts_av(j,i) = ts_av(j,i) + surf_lsm_h%ts(m)
933	ENDDO
934	DO m = 1, surf_usm_h%ns
935	i = surf_usm_h%i(m)
936	j = surf_usm_h%j(m)
937	ts_av(j,i) = ts_av(j,i) + surf_usm_h%ts(m)
938	ENDDO
939
940	CASE ( 'tsurf*' )
941	DO m = 1, surf_def_h(0)%ns
942	i = surf_def_h(0)%i(m)
943	j = surf_def_h(0)%j(m)
944	tsurf_av(j,i) = tsurf_av(j,i) + surf_def_h(0)%pt_surface(m)
945	ENDDO
946
947	DO m = 1, surf_lsm_h%ns
948	i = surf_lsm_h%i(m)
949	j = surf_lsm_h%j(m)
950	tsurf_av(j,i) = tsurf_av(j,i) + surf_lsm_h%pt_surface(m)
951	ENDDO
952
953	DO m = 1, surf_usm_h%ns
954	i = surf_usm_h%i(m)
955	j = surf_usm_h%j(m)
956	tsurf_av(j,i) = tsurf_av(j,i) + surf_usm_h%pt_surface(m)
957	ENDDO
958
959	CASE ( 'u' )
960	DO i = nxlg, nxrg
961	DO j = nysg, nyng
962	DO k = nzb, nzt+1
963	u_av(k,j,i) = u_av(k,j,i) + u(k,j,i)
964	ENDDO
965	ENDDO
966	ENDDO
967
968	CASE ( 'u*' )
969	DO m = 1, surf_def_h(0)%ns
970	i = surf_def_h(0)%i(m)
971	j = surf_def_h(0)%j(m)
972	us_av(j,i) = us_av(j,i) + surf_def_h(0)%us(m)
973	ENDDO
974	DO m = 1, surf_lsm_h%ns
975	i = surf_lsm_h%i(m)
976	j = surf_lsm_h%j(m)
977	us_av(j,i) = us_av(j,i) + surf_lsm_h%us(m)
978	ENDDO
979	DO m = 1, surf_usm_h%ns
980	i = surf_usm_h%i(m)
981	j = surf_usm_h%j(m)
982	us_av(j,i) = us_av(j,i) + surf_usm_h%us(m)
983	ENDDO
984
985	CASE ( 'v' )
986	DO i = nxlg, nxrg
987	DO j = nysg, nyng
988	DO k = nzb, nzt+1
989	v_av(k,j,i) = v_av(k,j,i) + v(k,j,i)
990	ENDDO
991	ENDDO
992	ENDDO
993
994	CASE ( 'vpt' )
995	DO i = nxlg, nxrg
996	DO j = nysg, nyng
997	DO k = nzb, nzt+1
998	vpt_av(k,j,i) = vpt_av(k,j,i) + vpt(k,j,i)
999	ENDDO
1000	ENDDO
1001	ENDDO
1002
1003	CASE ( 'w' )
1004	DO i = nxlg, nxrg
1005	DO j = nysg, nyng
1006	DO k = nzb, nzt+1
1007	w_av(k,j,i) = w_av(k,j,i) + w(k,j,i)
1008	ENDDO
1009	ENDDO
1010	ENDDO
1011
1012	CASE ( 'z0*' )
1013	DO m = 1, surf_def_h(0)%ns
1014	i = surf_def_h(0)%i(m)
1015	j = surf_def_h(0)%j(m)
1016	z0_av(j,i) = z0_av(j,i) + surf_def_h(0)%z0(m)
1017	ENDDO
1018	DO m = 1, surf_lsm_h%ns
1019	i = surf_lsm_h%i(m)
1020	j = surf_lsm_h%j(m)
1021	z0_av(j,i) = z0_av(j,i) + surf_lsm_h%z0(m)
1022	ENDDO
1023	DO m = 1, surf_usm_h%ns
1024	i = surf_usm_h%i(m)
1025	j = surf_usm_h%j(m)
1026	z0_av(j,i) = z0_av(j,i) + surf_usm_h%z0(m)
1027	ENDDO
1028
1029	CASE ( 'z0h*' )
1030	DO m = 1, surf_def_h(0)%ns
1031	i = surf_def_h(0)%i(m)
1032	j = surf_def_h(0)%j(m)
1033	z0h_av(j,i) = z0h_av(j,i) + surf_def_h(0)%z0h(m)
1034	ENDDO
1035	DO m = 1, surf_lsm_h%ns
1036	i = surf_lsm_h%i(m)
1037	j = surf_lsm_h%j(m)
1038	z0h_av(j,i) = z0h_av(j,i) + surf_lsm_h%z0h(m)
1039	ENDDO
1040	DO m = 1, surf_usm_h%ns
1041	i = surf_usm_h%i(m)
1042	j = surf_usm_h%j(m)
1043	z0h_av(j,i) = z0h_av(j,i) + surf_usm_h%z0h(m)
1044	ENDDO
1045
1046	CASE ( 'z0q*' )
1047	DO m = 1, surf_def_h(0)%ns
1048	i = surf_def_h(0)%i(m)
1049	j = surf_def_h(0)%j(m)
1050	z0q_av(j,i) = z0q_av(j,i) + surf_def_h(0)%z0q(m)
1051	ENDDO
1052	DO m = 1, surf_lsm_h%ns
1053	i = surf_lsm_h%i(m)
1054	j = surf_lsm_h%j(m)
1055	z0q_av(j,i) = z0q_av(j,i) + surf_lsm_h%z0q(m)
1056	ENDDO
1057	DO m = 1, surf_usm_h%ns
1058	i = surf_usm_h%i(m)
1059	j = surf_usm_h%j(m)
1060	z0q_av(j,i) = z0q_av(j,i) + surf_usm_h%z0q(m)
1061	ENDDO
1062	!
1063	!-- Block of urban surface model outputs.
1064	!-- In case of urban surface variables it should be always checked
1065	!-- if respective arrays are allocated, at least in case of a restart
1066	!-- run, as usm arrays are not read from file at the moment.
1067	CASE ( 'usm_output' )
1068	CALL usm_average_3d_data( 'allocate', doav(ii) )
1069	CALL usm_average_3d_data( 'sum', doav(ii) )
1070
1071	CASE DEFAULT
1072	!
1073	!-- Turbulence closure module
1074	CALL tcm_3d_data_averaging( 'sum', doav(ii) )
1075
1076	!
1077	!-- Land surface quantity
1078	IF ( land_surface ) THEN
1079	CALL lsm_3d_data_averaging( 'sum', doav(ii) )
1080	ENDIF
1081
1082	!
1083	!-- Radiation quantity
1084	IF ( radiation ) THEN
1085	CALL radiation_3d_data_averaging( 'sum', doav(ii) )
1086	ENDIF
1087
1088	!
1089	!-- Gust module quantities
1090	IF ( gust_module_enabled ) THEN
1091	CALL gust_3d_data_averaging( 'sum', doav(ii) )
1092	ENDIF
1093
1094	!
1095	!-- Chemical quantity
1096	IF ( air_chemistry .AND. trimvar(1:3) == 'kc_') THEN
1097	CALL chem_3d_data_averaging( 'sum',doav(ii) )
1098	ENDIF
1099
1100	!
1101	!-- UV exposure quantity
1102	IF ( uv_exposure ) THEN
1103	CALL uvem_3d_data_averaging( 'sum', doav(ii) )
1104	ENDIF
1105
1106	!
1107	!-- User-defined quantity
1108	CALL user_3d_data_averaging( 'sum', doav(ii) )
1109
1110	END SELECT
1111
1112	ENDDO
1113
1114	CALL cpu_log( log_point(34), 'sum_up_3d_data', 'stop' )
1115
1116
1117	END SUBROUTINE sum_up_3d_data

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |