Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 974

Last change on this file since 974 was 941, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.5 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 941 2012-07-09 14:50:21Z maronga $
11	!
12	! 940 2012-07-09 14:31:00Z raasch
13	! +neutral
14	!
15	! 927 2012-06-06 19:15:04Z raasch
16	! +masking_method
17	!
18	! 849 2012-03-15 10:35:09Z raasch
19	! first_call_advec_particles renamed first_call_lpm
20	!
21	! 824 2012-02-17 09:09:57Z raasch
22	! +curvature_solution_effects
23	!
24	! 626 2010-12-10 13:04:12Z suehring
25	! idum replaced by cdum in read_parts_of_var_list
26	!
27	! 622 2010-12-10 08:08:13Z raasch
28	! +collective_wait
29	!
30	! 600 2010-11-24 16:10:51Z raasch
31	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
32	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
33	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
34	! in routine skip_var_list (end of this file), variable ldum is replaced
35	! by cdum(LEN=1), because otherwise read errors (too few data on file)
36	! appear due to one of the additional parameters (cycle_mg) which are now
37	! stored on the restart file
38	!
39	! 591 2010-10-28 06:35:52Z helmke
40	! remove print command
41	!
42	! 587 2010-10-27 08:36:51Z helmke
43	! +time_domask
44	!
45	! 580 2010-10-05 13:59:11Z heinze
46	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
47	! ws_vertical_gradient_level to subs_vertical_gradient_level and
48	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
49	!
50	! 411 2009-12-11 14:15:58Z heinze
51	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
52	! ws_vertical_gradient_level_ind
53	!
54	! 345 2009-07-01 14:37:56Z heinze
55	! +output_for_t0
56	! dt_fixed is read into a dummy variable.
57	! Output of messages replaced by message handling routine.
58	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
59	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
60	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
61	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
62	!
63	! 216 2008-11-25 07:12:43Z raasch
64	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
65	!
66	! 173 2008-05-23 20:39:38Z raasch
67	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
68	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
69	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
70	! recycling_width, turbulent_inflow,
71	! -cross_ts_*, npex, npey,
72	! hom_sum, volume_flow_area, volume_flow_initial moved from
73	! read_3d_binary to here,
74	! routines read_parts_of_var_list and skip_var_list added at the end
75	!
76	! 138 2007-11-28 10:03:58Z letzel
77	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
78	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
79	! plant_canopy, time_sort_particles
80	!
81	! 102 2007-07-27 09:09:17Z raasch
82	! +time_coupling, top_momentumflux_u\|v
83	!
84	! 95 2007-06-02 16:48:38Z raasch
85	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
86	! sa_vertical_gradient_level, bottom/top_salinity_flux
87	!
88	! 87 2007-05-22 15:46:47Z raasch
89	! +max_pr_user (version 3.1), var_hom renamed pr_palm
90	!
91	! 75 2007-03-22 09:54:05Z raasch
92	! +loop_optimization, pt_reference, moisture renamed humidity
93	!
94	! 20 2007-02-26 00:12:32Z raasch
95	! +top_heatflux, use_top_fluxes
96	!
97	! RCS Log replace by Id keyword, revision history cleaned up
98	!
99	! Revision 1.34 2006/08/22 14:14:27 raasch
100	! +dz_max
101	!
102	! Revision 1.1 1998/03/18 20:18:48 raasch
103	! Initial revision
104	!
105	!
106	! Description:
107	! ------------
108	! Reading values of global control variables from restart-file (binary format)
109	!------------------------------------------------------------------------------!
110
111	USE arrays_3d
112	USE averaging
113	USE cloud_parameters
114	USE control_parameters
115	USE grid_variables
116	USE indices
117	USE model_1d
118	USE netcdf_control
119	USE particle_attributes
120	USE pegrid
121	USE profil_parameter
122	USE statistics
123
124	IMPLICIT NONE
125
126	CHARACTER (LEN=10) :: binary_version, version_on_file
127	CHARACTER (LEN=30) :: variable_chr
128
129	LOGICAL :: ldum
130
131
132	CALL check_open( 13 )
133
134	!
135	!-- Make version number check first
136	READ ( 13 ) version_on_file
137	binary_version = '3.5'
138	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
139	WRITE( message_string, * ) 'version mismatch concerning control ', &
140	'variables', &
141	'&version on file = "', &
142	TRIM( version_on_file ), '"', &
143	'&version on program = "', &
144	TRIM( binary_version ), '"'
145	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
146	ENDIF
147
148	!
149	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
150	!-- run
151	READ ( 13 ) variable_chr
152	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
153	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
154	'run on PE ', myid
155	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
156	ENDIF
157	READ ( 13 ) numprocs_previous_run
158
159	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
160	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
161	ENDIF
162
163	READ ( 13 ) variable_chr
164	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
165	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
166	'prior run on PE ', myid
167	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
168	ENDIF
169	READ ( 13 ) hor_index_bounds_previous_run
170
171	!
172	!-- Read vertical number of gridpoints and number of different areas used
173	!-- for computing statistics. Allocate arrays depending on these values,
174	!-- which are needed for the following read instructions.
175	READ ( 13 ) variable_chr
176	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
177	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
178	myid
179	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
180	ENDIF
181	READ ( 13 ) nz
182
183	READ ( 13 ) variable_chr
184	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
185	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
186	'prior run on PE ', myid
187	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
188	ENDIF
189	READ ( 13 ) max_pr_user ! This value is checked against the number of
190	! user profiles given for the current run
191	! in routine user_parin (it has to match)
192
193	READ ( 13 ) variable_chr
194	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
195	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
196	'prior run on PE ', myid
197	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
198	ENDIF
199	READ ( 13 ) statistic_regions
200	IF ( .NOT. ALLOCATED( ug ) ) THEN
201	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
202	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
203	sa_init(0:nz+1), &
204	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
205	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
206	ENDIF
207
208	!
209	!-- Now read all control parameters:
210	!-- Caution: When the following read instructions have been changed, the
211	!-- ------- version number stored in the variable binary_version has to be
212	!-- increased. The same changes must also be done in write_var_list.
213	READ ( 13 ) variable_chr
214	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
215
216	SELECT CASE ( TRIM( variable_chr ) )
217
218	CASE ( 'adjust_mixing_length' )
219	READ ( 13 ) adjust_mixing_length
220	CASE ( 'advected_distance_x' )
221	READ ( 13 ) advected_distance_x
222	CASE ( 'advected_distance_y' )
223	READ ( 13 ) advected_distance_y
224	CASE ( 'alpha_surface' )
225	READ ( 13 ) alpha_surface
226	CASE ( 'average_count_pr' )
227	READ ( 13 ) average_count_pr
228	CASE ( 'average_count_sp' )
229	READ ( 13 ) average_count_sp
230	CASE ( 'average_count_3d' )
231	READ ( 13 ) average_count_3d
232	CASE ( 'bc_e_b' )
233	READ ( 13 ) bc_e_b
234	CASE ( 'bc_lr' )
235	READ ( 13 ) bc_lr
236	CASE ( 'bc_ns' )
237	READ ( 13 ) bc_ns
238	CASE ( 'bc_p_b' )
239	READ ( 13 ) bc_p_b
240	CASE ( 'bc_p_t' )
241	READ ( 13 ) bc_p_t
242	CASE ( 'bc_pt_b' )
243	READ ( 13 ) bc_pt_b
244	CASE ( 'bc_pt_t' )
245	READ ( 13 ) bc_pt_t
246	CASE ( 'bc_pt_t_val' )
247	READ ( 13 ) bc_pt_t_val
248	CASE ( 'bc_q_b' )
249	READ ( 13 ) bc_q_b
250	CASE ( 'bc_q_t' )
251	READ ( 13 ) bc_q_t
252	CASE ( 'bc_q_t_val' )
253	READ ( 13 ) bc_q_t_val
254	CASE ( 'bc_s_b' )
255	READ ( 13 ) bc_s_b
256	CASE ( 'bc_s_t' )
257	READ ( 13 ) bc_s_t
258	CASE ( 'bc_sa_t' )
259	READ ( 13 ) bc_sa_t
260	CASE ( 'bc_uv_b' )
261	READ ( 13 ) bc_uv_b
262	CASE ( 'bc_uv_t' )
263	READ ( 13 ) bc_uv_t
264	CASE ( 'bottom_salinityflux' )
265	READ ( 13 ) bottom_salinityflux
266	CASE ( 'building_height' )
267	READ ( 13 ) building_height
268	CASE ( 'building_length_x' )
269	READ ( 13 ) building_length_x
270	CASE ( 'building_length_y' )
271	READ ( 13 ) building_length_y
272	CASE ( 'building_wall_left' )
273	READ ( 13 ) building_wall_left
274	CASE ( 'building_wall_south' )
275	READ ( 13 ) building_wall_south
276	CASE ( 'call_psolver_at_all_substeps' )
277	READ ( 13 ) call_psolver_at_all_substeps
278	CASE ( 'canopy_mode' )
279	READ ( 13 ) canopy_mode
280	CASE ( 'canyon_height' )
281	READ ( 13 ) canyon_height
282	CASE ( 'canyon_width_x' )
283	READ ( 13 ) canyon_width_x
284	CASE ( 'canyon_width_y' )
285	READ ( 13 ) canyon_width_y
286	CASE ( 'canyon_wall_left' )
287	READ ( 13 ) canyon_wall_left
288	CASE ( 'canyon_wall_south' )
289	READ ( 13 ) canyon_wall_south
290	CASE ( 'cfl_factor' )
291	READ ( 13 ) cfl_factor
292	CASE ( 'cloud_droplets' )
293	READ ( 13 ) cloud_droplets
294	CASE ( 'cloud_physics' )
295	READ ( 13 ) cloud_physics
296	CASE ( 'collective_wait' )
297	READ ( 13 ) collective_wait
298	CASE ( 'conserve_volume_flow' )
299	READ ( 13 ) conserve_volume_flow
300	CASE ( 'conserve_volume_flow_mode' )
301	READ ( 13 ) conserve_volume_flow_mode
302	CASE ( 'coupling_start_time' )
303	READ ( 13 ) coupling_start_time
304	CASE ( 'cthf' )
305	READ ( 13 ) cthf
306	CASE ( 'current_timestep_number' )
307	READ ( 13 ) current_timestep_number
308	CASE ( 'curvature_solution_effects' )
309	READ ( 13 ) curvature_solution_effects
310	CASE ( 'cut_spline_overshoot' )
311	READ ( 13 ) cut_spline_overshoot
312	CASE ( 'cycle_mg' )
313	READ ( 13 ) cycle_mg
314	CASE ( 'damp_level_1d' )
315	READ ( 13 ) damp_level_1d
316	CASE ( 'dissipation_1d' )
317	READ ( 13 ) dissipation_1d
318	CASE ( 'dp_external' )
319	READ ( 13 ) dp_external
320	CASE ( 'dp_level_b' )
321	READ ( 13 ) dp_level_b
322	CASE ( 'dp_smooth' )
323	READ ( 13 ) dp_smooth
324	CASE ( 'dpdxy' )
325	READ ( 13 ) dpdxy
326	CASE ( 'drag_coefficient' )
327	READ ( 13 ) drag_coefficient
328	CASE ( 'dt_fixed' )
329	READ ( 13 ) ldum ! restart files created before rev 333
330	! contained dt_fixed by mistake; it is still
331	! read here in order to allow usage of these
332	! older restart files; can be removed in a
333	! later version
334	CASE ( 'dt_pr_1d' )
335	READ ( 13 ) dt_pr_1d
336	CASE ( 'dt_run_control_1d' )
337	READ ( 13 ) dt_run_control_1d
338	CASE ( 'dt_3d' )
339	READ ( 13 ) dt_3d
340	CASE ( 'dvrp_filecount' )
341	READ ( 13 ) dvrp_filecount
342	CASE ( 'dx' )
343	READ ( 13 ) dx
344	CASE ( 'dy' )
345	READ ( 13 ) dy
346	CASE ( 'dz' )
347	READ ( 13 ) dz
348	CASE ( 'dz_max' )
349	READ ( 13 ) dz_max
350	CASE ( 'dz_stretch_factor' )
351	READ ( 13 ) dz_stretch_factor
352	CASE ( 'dz_stretch_level' )
353	READ ( 13 ) dz_stretch_level
354	CASE ( 'e_min' )
355	READ ( 13 ) e_min
356	CASE ( 'end_time_1d' )
357	READ ( 13 ) end_time_1d
358	CASE ( 'fft_method' )
359	READ ( 13 ) fft_method
360	CASE ( 'first_call_lpm' )
361	READ ( 13 ) first_call_lpm
362	CASE ( 'galilei_transformation' )
363	READ ( 13 ) galilei_transformation
364	CASE ( 'grid_matching' )
365	READ ( 13 ) grid_matching
366	CASE ( 'hom' )
367	READ ( 13 ) hom
368	CASE ( 'hom_sum' )
369	READ ( 13 ) hom_sum
370	CASE ( 'humidity' )
371	READ ( 13 ) humidity
372	CASE ( 'inflow_damping_factor' )
373	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
374	ALLOCATE( inflow_damping_factor(0:nz+1) )
375	ENDIF
376	READ ( 13 ) inflow_damping_factor
377	CASE ( 'inflow_damping_height' )
378	READ ( 13 ) inflow_damping_height
379	CASE ( 'inflow_damping_width' )
380	READ ( 13 ) inflow_damping_width
381	CASE ( 'inflow_disturbance_begin' )
382	READ ( 13 ) inflow_disturbance_begin
383	CASE ( 'inflow_disturbance_end' )
384	READ ( 13 ) inflow_disturbance_end
385	CASE ( 'km_constant' )
386	READ ( 13 ) km_constant
387	CASE ( 'km_damp_max' )
388	READ ( 13 ) km_damp_max
389	CASE ( 'lad' )
390	READ ( 13 ) lad
391	CASE ( 'lad_surface' )
392	READ ( 13 ) lad_surface
393	CASE ( 'lad_vertical_gradient' )
394	READ ( 13 ) lad_vertical_gradient
395	CASE ( 'lad_vertical_gradient_level' )
396	READ ( 13 ) lad_vertical_gradient_level
397	CASE ( 'lad_vertical_gradient_level_in' )
398	READ ( 13 ) lad_vertical_gradient_level_ind
399	CASE ( 'last_dt_change' )
400	READ ( 13 ) last_dt_change
401	CASE ( 'large_scale_subsidence' )
402	READ ( 13 ) large_scale_subsidence
403	CASE ( 'leaf_surface_concentration' )
404	READ ( 13 ) leaf_surface_concentration
405	CASE ( 'long_filter_factor' )
406	READ ( 13 ) long_filter_factor
407	CASE ( 'loop_optimization' )
408	READ ( 13 ) loop_optimization
409	CASE ( 'masking_method' )
410	READ ( 13 ) masking_method
411	CASE ( 'mean_inflow_profiles' )
412	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
413	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
414	ENDIF
415	READ ( 13 ) mean_inflow_profiles
416	CASE ( 'mg_cycles' )
417	READ ( 13 ) mg_cycles
418	CASE ( 'mg_switch_to_pe0_level' )
419	READ ( 13 ) mg_switch_to_pe0_level
420	CASE ( 'mixing_length_1d' )
421	READ ( 13 ) mixing_length_1d
422	CASE ( 'momentum_advec' )
423	READ ( 13 ) momentum_advec
424	CASE ( 'netcdf_precision' )
425	READ ( 13 ) netcdf_precision
426	CASE ( 'neutral' )
427	READ ( 13 ) neutral
428	CASE ( 'ngsrb' )
429	READ ( 13 ) ngsrb
430	CASE ( 'nsor' )
431	READ ( 13 ) nsor
432	CASE ( 'nsor_ini' )
433	READ ( 13 ) nsor_ini
434	CASE ( 'nx' )
435	READ ( 13 ) nx
436	nx_on_file = nx
437	CASE ( 'ny' )
438	READ ( 13 ) ny
439	ny_on_file = ny
440	CASE ( 'ocean' )
441	READ ( 13 ) ocean
442	CASE ( 'old_dt' )
443	READ ( 13 ) old_dt
444	CASE ( 'omega' )
445	READ ( 13 ) omega
446	CASE ( 'omega_sor' )
447	READ ( 13 ) omega_sor
448	CASE ( 'outflow_damping_width' )
449	READ ( 13 ) outflow_damping_width
450	CASE ( 'output_for_t0' )
451	READ (13) output_for_t0
452	CASE ( 'overshoot_limit_e' )
453	READ ( 13 ) overshoot_limit_e
454	CASE ( 'overshoot_limit_pt' )
455	READ ( 13 ) overshoot_limit_pt
456	CASE ( 'overshoot_limit_u' )
457	READ ( 13 ) overshoot_limit_u
458	CASE ( 'overshoot_limit_v' )
459	READ ( 13 ) overshoot_limit_v
460	CASE ( 'overshoot_limit_w' )
461	READ ( 13 ) overshoot_limit_w
462	CASE ( 'passive_scalar' )
463	READ ( 13 ) passive_scalar
464	CASE ( 'pch_index' )
465	READ ( 13 ) pch_index
466	CASE ( 'phi' )
467	READ ( 13 ) phi
468	CASE ( 'plant_canopy' )
469	READ ( 13 ) plant_canopy
470	CASE ( 'prandtl_layer' )
471	READ ( 13 ) prandtl_layer
472	CASE ( 'prandtl_number' )
473	READ ( 13 ) prandtl_number
474	CASE ( 'precipitation' )
475	READ ( 13 ) precipitation
476	CASE ( 'psolver' )
477	READ ( 13 ) psolver
478	CASE ( 'pt_init' )
479	READ ( 13 ) pt_init
480	CASE ( 'pt_reference' )
481	READ ( 13 ) pt_reference
482	CASE ( 'pt_surface' )
483	READ ( 13 ) pt_surface
484	CASE ( 'pt_surface_initial_change' )
485	READ ( 13 ) pt_surface_initial_change
486	CASE ( 'pt_vertical_gradient' )
487	READ ( 13 ) pt_vertical_gradient
488	CASE ( 'pt_vertical_gradient_level' )
489	READ ( 13 ) pt_vertical_gradient_level
490	CASE ( 'pt_vertical_gradient_level_ind' )
491	READ ( 13 ) pt_vertical_gradient_level_ind
492	CASE ( 'q_init' )
493	READ ( 13 ) q_init
494	CASE ( 'q_surface' )
495	READ ( 13 ) q_surface
496	CASE ( 'q_surface_initial_change' )
497	READ ( 13 ) q_surface_initial_change
498	CASE ( 'q_vertical_gradient' )
499	READ ( 13 ) q_vertical_gradient
500	CASE ( 'q_vertical_gradient_level' )
501	READ ( 13 ) q_vertical_gradient_level
502	CASE ( 'q_vertical_gradient_level_ind' )
503	READ ( 13 ) q_vertical_gradient_level_ind
504	CASE ( 'radiation' )
505	READ ( 13 ) radiation
506	CASE ( 'random_generator' )
507	READ ( 13 ) random_generator
508	CASE ( 'random_heatflux' )
509	READ ( 13 ) random_heatflux
510	CASE ( 'rayleigh_damping_factor' )
511	READ ( 13 ) rayleigh_damping_factor
512	CASE ( 'rayleigh_damping_height' )
513	READ ( 13 ) rayleigh_damping_height
514	CASE ( 'recycling_width' )
515	READ ( 13 ) recycling_width
516	CASE ( 'residual_limit' )
517	READ ( 13 ) residual_limit
518	CASE ( 'rif_max' )
519	READ ( 13 ) rif_max
520	CASE ( 'rif_min' )
521	READ ( 13 ) rif_min
522	CASE ( 'roughness_length' )
523	READ ( 13 ) roughness_length
524	CASE ( 'runnr' )
525	READ ( 13 ) runnr
526	CASE ( 'run_coupled' )
527	READ ( 13 ) run_coupled
528	CASE ( 'sa_init' )
529	READ ( 13 ) sa_init
530	CASE ( 'sa_surface' )
531	READ ( 13 ) sa_surface
532	CASE ( 'sa_vertical_gradient' )
533	READ ( 13 ) sa_vertical_gradient
534	CASE ( 'sa_vertical_gradient_level' )
535	READ ( 13 ) sa_vertical_gradient_level
536	CASE ( 'scalar_advec' )
537	READ ( 13 ) scalar_advec
538	CASE ( 'scalar_exchange_coefficient' )
539	READ ( 13 ) scalar_exchange_coefficient
540	CASE ( 'simulated_time' )
541	READ ( 13 ) simulated_time
542	CASE ( 'surface_heatflux' )
543	READ ( 13 ) surface_heatflux
544	CASE ( 'surface_pressure' )
545	READ ( 13 ) surface_pressure
546	CASE ( 'surface_scalarflux' )
547	READ ( 13 ) surface_scalarflux
548	CASE ( 'surface_waterflux' )
549	READ ( 13 ) surface_waterflux
550	CASE ( 's_surface' )
551	READ ( 13 ) s_surface
552	CASE ( 's_surface_initial_change' )
553	READ ( 13 ) s_surface_initial_change
554	CASE ( 's_vertical_gradient' )
555	READ ( 13 ) s_vertical_gradient
556	CASE ( 's_vertical_gradient_level' )
557	READ ( 13 ) s_vertical_gradient_level
558	CASE ( 'time_coupling' )
559	READ ( 13 ) time_coupling
560	CASE ( 'time_disturb' )
561	READ ( 13 ) time_disturb
562	CASE ( 'time_dopr' )
563	READ ( 13 ) time_dopr
564	CASE ( 'time_domask' )
565	READ ( 13 ) time_domask
566	CASE ( 'time_dopr_av' )
567	READ ( 13 ) time_dopr_av
568	CASE ( 'time_dopr_listing' )
569	READ ( 13 ) time_dopr_listing
570	CASE ( 'time_dopts' )
571	READ ( 13 ) time_dopts
572	CASE ( 'time_dosp' )
573	READ ( 13 ) time_dosp
574	CASE ( 'time_dots' )
575	READ ( 13 ) time_dots
576	CASE ( 'time_do2d_xy' )
577	READ ( 13 ) time_do2d_xy
578	CASE ( 'time_do2d_xz' )
579	READ ( 13 ) time_do2d_xz
580	CASE ( 'time_do2d_yz' )
581	READ ( 13 ) time_do2d_yz
582	CASE ( 'time_do3d' )
583	READ ( 13 ) time_do3d
584	CASE ( 'time_do_av' )
585	READ ( 13 ) time_do_av
586	CASE ( 'time_do_sla' )
587	READ ( 13 ) time_do_sla
588	CASE ( 'time_dvrp' )
589	READ ( 13 ) time_dvrp
590	CASE ( 'time_restart' )
591	READ ( 13 ) time_restart
592	CASE ( 'time_run_control' )
593	READ ( 13 ) time_run_control
594	CASE ( 'time_since_reference_point' )
595	READ ( 13 ) time_since_reference_point
596	CASE ( 'time_sort_particles' )
597	READ ( 13 ) time_sort_particles
598	CASE ( 'timestep_scheme' )
599	READ ( 13 ) timestep_scheme
600	CASE ( 'topography' )
601	READ ( 13 ) topography
602	CASE ( 'topography_grid_convention' )
603	READ ( 13 ) topography_grid_convention
604	CASE ( 'top_heatflux' )
605	READ ( 13 ) top_heatflux
606	CASE ( 'top_momentumflux_u' )
607	READ ( 13 ) top_momentumflux_u
608	CASE ( 'top_momentumflux_v' )
609	READ ( 13 ) top_momentumflux_v
610	CASE ( 'top_salinityflux' )
611	READ ( 13 ) top_salinityflux
612	CASE ( 'tsc' )
613	READ ( 13 ) tsc
614	CASE ( 'turbulent_inflow' )
615	READ ( 13 ) turbulent_inflow
616	CASE ( 'u_bulk' )
617	READ ( 13 ) u_bulk
618	CASE ( 'u_init' )
619	READ ( 13 ) u_init
620	CASE ( 'u_max' )
621	READ ( 13 ) u_max
622	CASE ( 'u_max_ijk' )
623	READ ( 13 ) u_max_ijk
624	CASE ( 'ug' )
625	READ ( 13 ) ug
626	CASE ( 'ug_surface' )
627	READ ( 13 ) ug_surface
628	CASE ( 'ug_vertical_gradient' )
629	READ ( 13 ) ug_vertical_gradient
630	CASE ( 'ug_vertical_gradient_level' )
631	READ ( 13 ) ug_vertical_gradient_level
632	CASE ( 'ug_vertical_gradient_level_ind' )
633	READ ( 13 ) ug_vertical_gradient_level_ind
634	CASE ( 'ups_limit_e' )
635	READ ( 13 ) ups_limit_e
636	CASE ( 'ups_limit_pt' )
637	READ ( 13 ) ups_limit_pt
638	CASE ( 'ups_limit_u' )
639	READ ( 13 ) ups_limit_u
640	CASE ( 'ups_limit_v' )
641	READ ( 13 ) ups_limit_v
642	CASE ( 'ups_limit_w' )
643	READ ( 13 ) ups_limit_w
644	CASE ( 'use_surface_fluxes' )
645	READ ( 13 ) use_surface_fluxes
646	CASE ( 'use_top_fluxes' )
647	READ ( 13 ) use_top_fluxes
648	CASE ( 'use_ug_for_galilei_tr' )
649	READ ( 13 ) use_ug_for_galilei_tr
650	CASE ( 'use_upstream_for_tke' )
651	READ ( 13 ) use_upstream_for_tke
652	CASE ( 'v_bulk' )
653	READ ( 13 ) v_bulk
654	CASE ( 'v_init' )
655	READ ( 13 ) v_init
656	CASE ( 'v_max' )
657	READ ( 13 ) v_max
658	CASE ( 'v_max_ijk' )
659	READ ( 13 ) v_max_ijk
660	CASE ( 'vg' )
661	READ ( 13 ) vg
662	CASE ( 'vg_surface' )
663	READ ( 13 ) vg_surface
664	CASE ( 'vg_vertical_gradient' )
665	READ ( 13 ) vg_vertical_gradient
666	CASE ( 'vg_vertical_gradient_level' )
667	READ ( 13 ) vg_vertical_gradient_level
668	CASE ( 'vg_vertical_gradient_level_ind' )
669	READ ( 13 ) vg_vertical_gradient_level_ind
670	CASE ( 'volume_flow_area' )
671	READ ( 13 ) volume_flow_area
672	CASE ( 'volume_flow_initial' )
673	READ ( 13 ) volume_flow_initial
674	CASE ( 'wall_adjustment' )
675	READ ( 13 ) wall_adjustment
676	CASE ( 'subs_vertical_gradient' )
677	READ ( 13 ) subs_vertical_gradient
678	CASE ( 'subs_vertical_gradient_level' )
679	READ ( 13 ) subs_vertical_gradient_level
680	CASE ( 'subs_vertical_gradient_level_i' )
681	READ ( 13 ) subs_vertical_gradient_level_i
682	CASE ( 'w_max' )
683	READ ( 13 ) w_max
684	CASE ( 'w_max_ijk' )
685	READ ( 13 ) w_max_ijk
686
687	CASE DEFAULT
688	WRITE( message_string, * ) 'unknown variable named "', &
689	TRIM( variable_chr ), '" found in', &
690	' data from prior run on PE ', myid
691	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
692	END SELECT
693	!
694	!-- Read next string
695	READ ( 13 ) variable_chr
696
697	ENDDO
698
699
700	END SUBROUTINE read_var_list
701
702
703
704	SUBROUTINE read_parts_of_var_list
705
706	!------------------------------------------------------------------------------!
707	! Description:
708	! ------------
709	! Skipping the global control variables from restart-file (binary format)
710	! except some informations needed when reading restart data from a previous
711	! run which used a smaller total domain or/and a different domain decomposition.
712	!------------------------------------------------------------------------------!
713
714	USE arrays_3d
715	USE control_parameters
716	USE indices
717	USE pegrid
718	USE statistics
719
720	IMPLICIT NONE
721
722	CHARACTER (LEN=10) :: version_on_file
723	CHARACTER (LEN=30) :: variable_chr
724	CHARACTER (LEN=1) :: cdum
725
726	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
727	statistic_regions_on_file, tmp_mpru, tmp_sr
728
729	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
730	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
731
732
733	CALL check_open( 13 )
734
735	WRITE (9,*) 'rpovl: after check open 13'
736	CALL local_flush( 9 )
737	READ ( 13 ) version_on_file
738
739	!
740	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
741	!-- run
742	READ ( 13 ) variable_chr
743	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
744	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
745	'run on PE ', myid
746	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
747	ENDIF
748	READ ( 13 ) numprocs_previous_run
749
750	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
751	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
752	ENDIF
753
754	READ ( 13 ) variable_chr
755	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
756	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
757	'prior run on PE ', myid
758	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
759	ENDIF
760	READ ( 13 ) hor_index_bounds_previous_run
761
762	!
763	!-- Read vertical number of gridpoints and number of different areas used
764	!-- for computing statistics. Allocate arrays depending on these values,
765	!-- which are needed for the following read instructions.
766	READ ( 13 ) variable_chr
767	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
768	message_string = 'nz not found in restart data file'
769	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
770	ENDIF
771	READ ( 13 ) nz_on_file
772	IF ( nz_on_file /= nz ) THEN
773	WRITE( message_string, * ) 'mismatch concerning number of ', &
774	'gridpoints along z', &
775	'&nz on file = "', nz_on_file, '"', &
776	'&nz from run = "', nz, '"'
777	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
778	ENDIF
779
780	READ ( 13 ) variable_chr
781	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
782	message_string = 'max_pr_user not found in restart data file'
783	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
784	ENDIF
785	READ ( 13 ) max_pr_user_on_file
786	IF ( max_pr_user_on_file /= max_pr_user ) THEN
787	WRITE( message_string, * ) 'number of user profiles on res', &
788	'tart data file differs from the current ', &
789	'run&max_pr_user on file = "', &
790	max_pr_user_on_file, '"', &
791	'&max_pr_user from run = "', &
792	max_pr_user, '"'
793	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
794	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
795	ELSE
796	tmp_mpru = max_pr_user
797	ENDIF
798
799	READ ( 13 ) variable_chr
800	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
801	message_string = 'statistic_regions not found in restart data file'
802	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
803	ENDIF
804	READ ( 13 ) statistic_regions_on_file
805	IF ( statistic_regions_on_file /= statistic_regions ) THEN
806	WRITE( message_string, * ) 'statistic regions on restart data file ',&
807	'differ from the current run', &
808	'&statistic regions on file = "', &
809	statistic_regions_on_file, '"', &
810	'&statistic regions from run = "', &
811	statistic_regions, '"', &
812	'&statistic data may be lost!'
813	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
814	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
815	ELSE
816	tmp_sr = statistic_regions
817	ENDIF
818
819
820	!
821	!-- Now read and check some control parameters and skip the rest
822	WRITE (9,*) 'wpovl: begin reading variables'
823	CALL local_flush( 9 )
824	READ ( 13 ) variable_chr
825
826	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
827
828	SELECT CASE ( TRIM( variable_chr ) )
829
830	CASE ( 'average_count_pr' )
831	READ ( 13 ) average_count_pr
832	IF ( average_count_pr /= 0 ) THEN
833	WRITE( message_string, * ) 'inflow profiles not temporally ', &
834	'averaged. &Averaging will be done now using ', &
835	average_count_pr, ' samples.'
836	CALL message( 'read_parts_of_var_list', 'PA0309', &
837	0, 1, 0, 6, 0 )
838	ENDIF
839
840	CASE ( 'hom' )
841	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
842	0:statistic_regions_on_file) )
843	READ ( 13 ) hom_on_file
844	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
845	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
846	DEALLOCATE( hom_on_file )
847
848	CASE ( 'hom_sum' )
849	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
850	0:statistic_regions_on_file) )
851	READ ( 13 ) hom_sum_on_file
852	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
853	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
854	DEALLOCATE( hom_sum_on_file )
855
856	CASE ( 'nx' )
857	READ ( 13 ) nx_on_file
858
859	CASE ( 'ny' )
860	READ ( 13 ) ny_on_file
861
862
863	CASE DEFAULT
864
865	READ ( 13 ) cdum
866
867	END SELECT
868
869	READ ( 13 ) variable_chr
870
871	ENDDO
872
873	!
874	!-- Calculate the temporal average of vertical profiles, if neccessary
875	IF ( average_count_pr /= 0 ) THEN
876	hom_sum = hom_sum / REAL( average_count_pr )
877	ENDIF
878
879
880	END SUBROUTINE read_parts_of_var_list
881
882
883
884	SUBROUTINE skip_var_list
885
886	!------------------------------------------------------------------------------!
887	! Description:
888	! ------------
889	! Skipping the global control variables from restart-file (binary format)
890	!------------------------------------------------------------------------------!
891
892	IMPLICIT NONE
893
894	CHARACTER (LEN=10) :: version_on_file
895	CHARACTER (LEN=30) :: variable_chr
896
897	CHARACTER (LEN=1) :: cdum
898
899
900	WRITE (9,*) 'skipvl #1'
901	CALL local_flush( 9 )
902	READ ( 13 ) version_on_file
903
904	WRITE (9,*) 'skipvl before variable_chr'
905	CALL local_flush( 9 )
906	READ ( 13 ) variable_chr
907	WRITE (9,*) 'skipvl after variable_chr'
908	CALL local_flush( 9 )
909
910	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
911
912	WRITE (9,*) 'skipvl chr = ', variable_chr
913	CALL local_flush( 9 )
914	READ ( 13 ) cdum
915	READ ( 13 ) variable_chr
916
917	ENDDO
918	WRITE (9,*) 'skipvl last'
919	CALL local_flush( 9 )
920
921
922	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |