Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 883

Last change on this file since 883 was 850, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.3 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 850 2012-03-15 12:09:25Z suehring $
11	!
12	! 849 2012-03-15 10:35:09Z raasch
13	! first_call_advec_particles renamed first_call_lpm
14	!
15	! 824 2012-02-17 09:09:57Z raasch
16	! +curvature_solution_effects
17	!
18	! 626 2010-12-10 13:04:12Z suehring
19	! idum replaced by cdum in read_parts_of_var_list
20	!
21	! 622 2010-12-10 08:08:13Z raasch
22	! +collective_wait
23	!
24	! 600 2010-11-24 16:10:51Z raasch
25	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
26	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
27	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
28	! in routine skip_var_list (end of this file), variable ldum is replaced
29	! by cdum(LEN=1), because otherwise read errors (too few data on file)
30	! appear due to one of the additional parameters (cycle_mg) which are now
31	! stored on the restart file
32	!
33	! 591 2010-10-28 06:35:52Z helmke
34	! remove print command
35	!
36	! 587 2010-10-27 08:36:51Z helmke
37	! +time_domask
38	!
39	! 580 2010-10-05 13:59:11Z heinze
40	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
41	! ws_vertical_gradient_level to subs_vertical_gradient_level and
42	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
43	!
44	! 411 2009-12-11 14:15:58Z heinze
45	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
46	! ws_vertical_gradient_level_ind
47	!
48	! 345 2009-07-01 14:37:56Z heinze
49	! +output_for_t0
50	! dt_fixed is read into a dummy variable.
51	! Output of messages replaced by message handling routine.
52	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
53	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
54	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
55	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
56	!
57	! 216 2008-11-25 07:12:43Z raasch
58	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
59	!
60	! 173 2008-05-23 20:39:38Z raasch
61	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
62	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
63	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
64	! recycling_width, turbulent_inflow,
65	! -cross_ts_*, npex, npey,
66	! hom_sum, volume_flow_area, volume_flow_initial moved from
67	! read_3d_binary to here,
68	! routines read_parts_of_var_list and skip_var_list added at the end
69	!
70	! 138 2007-11-28 10:03:58Z letzel
71	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
72	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
73	! plant_canopy, time_sort_particles
74	!
75	! 102 2007-07-27 09:09:17Z raasch
76	! +time_coupling, top_momentumflux_u\|v
77	!
78	! 95 2007-06-02 16:48:38Z raasch
79	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
80	! sa_vertical_gradient_level, bottom/top_salinity_flux
81	!
82	! 87 2007-05-22 15:46:47Z raasch
83	! +max_pr_user (version 3.1), var_hom renamed pr_palm
84	!
85	! 75 2007-03-22 09:54:05Z raasch
86	! +loop_optimization, pt_reference, moisture renamed humidity
87	!
88	! 20 2007-02-26 00:12:32Z raasch
89	! +top_heatflux, use_top_fluxes
90	!
91	! RCS Log replace by Id keyword, revision history cleaned up
92	!
93	! Revision 1.34 2006/08/22 14:14:27 raasch
94	! +dz_max
95	!
96	! Revision 1.1 1998/03/18 20:18:48 raasch
97	! Initial revision
98	!
99	!
100	! Description:
101	! ------------
102	! Reading values of global control variables from restart-file (binary format)
103	!------------------------------------------------------------------------------!
104
105	USE arrays_3d
106	USE averaging
107	USE cloud_parameters
108	USE control_parameters
109	USE grid_variables
110	USE indices
111	USE model_1d
112	USE netcdf_control
113	USE particle_attributes
114	USE pegrid
115	USE profil_parameter
116	USE statistics
117
118	IMPLICIT NONE
119
120	CHARACTER (LEN=10) :: binary_version, version_on_file
121	CHARACTER (LEN=30) :: variable_chr
122
123	LOGICAL :: ldum
124
125
126	CALL check_open( 13 )
127
128	!
129	!-- Make version number check first
130	READ ( 13 ) version_on_file
131	binary_version = '3.5'
132	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
133	WRITE( message_string, * ) 'version mismatch concerning control ', &
134	'variables', &
135	'&version on file = "', &
136	TRIM( version_on_file ), '"', &
137	'&version on program = "', &
138	TRIM( binary_version ), '"'
139	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
140	ENDIF
141
142	!
143	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
144	!-- run
145	READ ( 13 ) variable_chr
146	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
147	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
148	'run on PE ', myid
149	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
150	ENDIF
151	READ ( 13 ) numprocs_previous_run
152
153	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
154	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
155	ENDIF
156
157	READ ( 13 ) variable_chr
158	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
159	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
160	'prior run on PE ', myid
161	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
162	ENDIF
163	READ ( 13 ) hor_index_bounds_previous_run
164
165	!
166	!-- Read vertical number of gridpoints and number of different areas used
167	!-- for computing statistics. Allocate arrays depending on these values,
168	!-- which are needed for the following read instructions.
169	READ ( 13 ) variable_chr
170	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
171	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
172	myid
173	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
174	ENDIF
175	READ ( 13 ) nz
176
177	READ ( 13 ) variable_chr
178	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
179	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
180	'prior run on PE ', myid
181	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
182	ENDIF
183	READ ( 13 ) max_pr_user ! This value is checked against the number of
184	! user profiles given for the current run
185	! in routine user_parin (it has to match)
186
187	READ ( 13 ) variable_chr
188	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
189	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
190	'prior run on PE ', myid
191	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
192	ENDIF
193	READ ( 13 ) statistic_regions
194	IF ( .NOT. ALLOCATED( ug ) ) THEN
195	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
196	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
197	sa_init(0:nz+1), &
198	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
199	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
200	ENDIF
201
202	!
203	!-- Now read all control parameters:
204	!-- Caution: When the following read instructions have been changed, the
205	!-- ------- version number stored in the variable binary_version has to be
206	!-- increased. The same changes must also be done in write_var_list.
207	READ ( 13 ) variable_chr
208	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
209
210	SELECT CASE ( TRIM( variable_chr ) )
211
212	CASE ( 'adjust_mixing_length' )
213	READ ( 13 ) adjust_mixing_length
214	CASE ( 'advected_distance_x' )
215	READ ( 13 ) advected_distance_x
216	CASE ( 'advected_distance_y' )
217	READ ( 13 ) advected_distance_y
218	CASE ( 'alpha_surface' )
219	READ ( 13 ) alpha_surface
220	CASE ( 'average_count_pr' )
221	READ ( 13 ) average_count_pr
222	CASE ( 'average_count_sp' )
223	READ ( 13 ) average_count_sp
224	CASE ( 'average_count_3d' )
225	READ ( 13 ) average_count_3d
226	CASE ( 'bc_e_b' )
227	READ ( 13 ) bc_e_b
228	CASE ( 'bc_lr' )
229	READ ( 13 ) bc_lr
230	CASE ( 'bc_ns' )
231	READ ( 13 ) bc_ns
232	CASE ( 'bc_p_b' )
233	READ ( 13 ) bc_p_b
234	CASE ( 'bc_p_t' )
235	READ ( 13 ) bc_p_t
236	CASE ( 'bc_pt_b' )
237	READ ( 13 ) bc_pt_b
238	CASE ( 'bc_pt_t' )
239	READ ( 13 ) bc_pt_t
240	CASE ( 'bc_pt_t_val' )
241	READ ( 13 ) bc_pt_t_val
242	CASE ( 'bc_q_b' )
243	READ ( 13 ) bc_q_b
244	CASE ( 'bc_q_t' )
245	READ ( 13 ) bc_q_t
246	CASE ( 'bc_q_t_val' )
247	READ ( 13 ) bc_q_t_val
248	CASE ( 'bc_s_b' )
249	READ ( 13 ) bc_s_b
250	CASE ( 'bc_s_t' )
251	READ ( 13 ) bc_s_t
252	CASE ( 'bc_sa_t' )
253	READ ( 13 ) bc_sa_t
254	CASE ( 'bc_uv_b' )
255	READ ( 13 ) bc_uv_b
256	CASE ( 'bc_uv_t' )
257	READ ( 13 ) bc_uv_t
258	CASE ( 'bottom_salinityflux' )
259	READ ( 13 ) bottom_salinityflux
260	CASE ( 'building_height' )
261	READ ( 13 ) building_height
262	CASE ( 'building_length_x' )
263	READ ( 13 ) building_length_x
264	CASE ( 'building_length_y' )
265	READ ( 13 ) building_length_y
266	CASE ( 'building_wall_left' )
267	READ ( 13 ) building_wall_left
268	CASE ( 'building_wall_south' )
269	READ ( 13 ) building_wall_south
270	CASE ( 'call_psolver_at_all_substeps' )
271	READ ( 13 ) call_psolver_at_all_substeps
272	CASE ( 'canopy_mode' )
273	READ ( 13 ) canopy_mode
274	CASE ( 'canyon_height' )
275	READ ( 13 ) canyon_height
276	CASE ( 'canyon_width_x' )
277	READ ( 13 ) canyon_width_x
278	CASE ( 'canyon_width_y' )
279	READ ( 13 ) canyon_width_y
280	CASE ( 'canyon_wall_left' )
281	READ ( 13 ) canyon_wall_left
282	CASE ( 'canyon_wall_south' )
283	READ ( 13 ) canyon_wall_south
284	CASE ( 'cfl_factor' )
285	READ ( 13 ) cfl_factor
286	CASE ( 'cloud_droplets' )
287	READ ( 13 ) cloud_droplets
288	CASE ( 'cloud_physics' )
289	READ ( 13 ) cloud_physics
290	CASE ( 'collective_wait' )
291	READ ( 13 ) collective_wait
292	CASE ( 'conserve_volume_flow' )
293	READ ( 13 ) conserve_volume_flow
294	CASE ( 'conserve_volume_flow_mode' )
295	READ ( 13 ) conserve_volume_flow_mode
296	CASE ( 'coupling_start_time' )
297	READ ( 13 ) coupling_start_time
298	CASE ( 'cthf' )
299	READ ( 13 ) cthf
300	CASE ( 'current_timestep_number' )
301	READ ( 13 ) current_timestep_number
302	CASE ( 'curvature_solution_effects' )
303	READ ( 13 ) curvature_solution_effects
304	CASE ( 'cut_spline_overshoot' )
305	READ ( 13 ) cut_spline_overshoot
306	CASE ( 'cycle_mg' )
307	READ ( 13 ) cycle_mg
308	CASE ( 'damp_level_1d' )
309	READ ( 13 ) damp_level_1d
310	CASE ( 'dissipation_1d' )
311	READ ( 13 ) dissipation_1d
312	CASE ( 'dp_external' )
313	READ ( 13 ) dp_external
314	CASE ( 'dp_level_b' )
315	READ ( 13 ) dp_level_b
316	CASE ( 'dp_smooth' )
317	READ ( 13 ) dp_smooth
318	CASE ( 'dpdxy' )
319	READ ( 13 ) dpdxy
320	CASE ( 'drag_coefficient' )
321	READ ( 13 ) drag_coefficient
322	CASE ( 'dt_fixed' )
323	READ ( 13 ) ldum ! restart files created before rev 333
324	! contained dt_fixed by mistake; it is still
325	! read here in order to allow usage of these
326	! older restart files; can be removed in a
327	! later version
328	CASE ( 'dt_pr_1d' )
329	READ ( 13 ) dt_pr_1d
330	CASE ( 'dt_run_control_1d' )
331	READ ( 13 ) dt_run_control_1d
332	CASE ( 'dt_3d' )
333	READ ( 13 ) dt_3d
334	CASE ( 'dvrp_filecount' )
335	READ ( 13 ) dvrp_filecount
336	CASE ( 'dx' )
337	READ ( 13 ) dx
338	CASE ( 'dy' )
339	READ ( 13 ) dy
340	CASE ( 'dz' )
341	READ ( 13 ) dz
342	CASE ( 'dz_max' )
343	READ ( 13 ) dz_max
344	CASE ( 'dz_stretch_factor' )
345	READ ( 13 ) dz_stretch_factor
346	CASE ( 'dz_stretch_level' )
347	READ ( 13 ) dz_stretch_level
348	CASE ( 'e_min' )
349	READ ( 13 ) e_min
350	CASE ( 'end_time_1d' )
351	READ ( 13 ) end_time_1d
352	CASE ( 'fft_method' )
353	READ ( 13 ) fft_method
354	CASE ( 'first_call_lpm' )
355	READ ( 13 ) first_call_lpm
356	CASE ( 'galilei_transformation' )
357	READ ( 13 ) galilei_transformation
358	CASE ( 'grid_matching' )
359	READ ( 13 ) grid_matching
360	CASE ( 'hom' )
361	READ ( 13 ) hom
362	CASE ( 'hom_sum' )
363	READ ( 13 ) hom_sum
364	CASE ( 'humidity' )
365	READ ( 13 ) humidity
366	CASE ( 'inflow_damping_factor' )
367	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
368	ALLOCATE( inflow_damping_factor(0:nz+1) )
369	ENDIF
370	READ ( 13 ) inflow_damping_factor
371	CASE ( 'inflow_damping_height' )
372	READ ( 13 ) inflow_damping_height
373	CASE ( 'inflow_damping_width' )
374	READ ( 13 ) inflow_damping_width
375	CASE ( 'inflow_disturbance_begin' )
376	READ ( 13 ) inflow_disturbance_begin
377	CASE ( 'inflow_disturbance_end' )
378	READ ( 13 ) inflow_disturbance_end
379	CASE ( 'km_constant' )
380	READ ( 13 ) km_constant
381	CASE ( 'km_damp_max' )
382	READ ( 13 ) km_damp_max
383	CASE ( 'lad' )
384	READ ( 13 ) lad
385	CASE ( 'lad_surface' )
386	READ ( 13 ) lad_surface
387	CASE ( 'lad_vertical_gradient' )
388	READ ( 13 ) lad_vertical_gradient
389	CASE ( 'lad_vertical_gradient_level' )
390	READ ( 13 ) lad_vertical_gradient_level
391	CASE ( 'lad_vertical_gradient_level_in' )
392	READ ( 13 ) lad_vertical_gradient_level_ind
393	CASE ( 'last_dt_change' )
394	READ ( 13 ) last_dt_change
395	CASE ( 'large_scale_subsidence' )
396	READ ( 13 ) large_scale_subsidence
397	CASE ( 'leaf_surface_concentration' )
398	READ ( 13 ) leaf_surface_concentration
399	CASE ( 'long_filter_factor' )
400	READ ( 13 ) long_filter_factor
401	CASE ( 'loop_optimization' )
402	READ ( 13 ) loop_optimization
403	CASE ( 'mean_inflow_profiles' )
404	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
405	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
406	ENDIF
407	READ ( 13 ) mean_inflow_profiles
408	CASE ( 'mg_cycles' )
409	READ ( 13 ) mg_cycles
410	CASE ( 'mg_switch_to_pe0_level' )
411	READ ( 13 ) mg_switch_to_pe0_level
412	CASE ( 'mixing_length_1d' )
413	READ ( 13 ) mixing_length_1d
414	CASE ( 'momentum_advec' )
415	READ ( 13 ) momentum_advec
416	CASE ( 'netcdf_precision' )
417	READ ( 13 ) netcdf_precision
418	CASE ( 'ngsrb' )
419	READ ( 13 ) ngsrb
420	CASE ( 'nsor' )
421	READ ( 13 ) nsor
422	CASE ( 'nsor_ini' )
423	READ ( 13 ) nsor_ini
424	CASE ( 'nx' )
425	READ ( 13 ) nx
426	nx_on_file = nx
427	CASE ( 'ny' )
428	READ ( 13 ) ny
429	ny_on_file = ny
430	CASE ( 'ocean' )
431	READ ( 13 ) ocean
432	CASE ( 'old_dt' )
433	READ ( 13 ) old_dt
434	CASE ( 'omega' )
435	READ ( 13 ) omega
436	CASE ( 'omega_sor' )
437	READ ( 13 ) omega_sor
438	CASE ( 'outflow_damping_width' )
439	READ ( 13 ) outflow_damping_width
440	CASE ( 'output_for_t0' )
441	READ (13) output_for_t0
442	CASE ( 'overshoot_limit_e' )
443	READ ( 13 ) overshoot_limit_e
444	CASE ( 'overshoot_limit_pt' )
445	READ ( 13 ) overshoot_limit_pt
446	CASE ( 'overshoot_limit_u' )
447	READ ( 13 ) overshoot_limit_u
448	CASE ( 'overshoot_limit_v' )
449	READ ( 13 ) overshoot_limit_v
450	CASE ( 'overshoot_limit_w' )
451	READ ( 13 ) overshoot_limit_w
452	CASE ( 'passive_scalar' )
453	READ ( 13 ) passive_scalar
454	CASE ( 'pch_index' )
455	READ ( 13 ) pch_index
456	CASE ( 'phi' )
457	READ ( 13 ) phi
458	CASE ( 'plant_canopy' )
459	READ ( 13 ) plant_canopy
460	CASE ( 'prandtl_layer' )
461	READ ( 13 ) prandtl_layer
462	CASE ( 'prandtl_number' )
463	READ ( 13 ) prandtl_number
464	CASE ( 'precipitation' )
465	READ ( 13 ) precipitation
466	CASE ( 'psolver' )
467	READ ( 13 ) psolver
468	CASE ( 'pt_init' )
469	READ ( 13 ) pt_init
470	CASE ( 'pt_reference' )
471	READ ( 13 ) pt_reference
472	CASE ( 'pt_surface' )
473	READ ( 13 ) pt_surface
474	CASE ( 'pt_surface_initial_change' )
475	READ ( 13 ) pt_surface_initial_change
476	CASE ( 'pt_vertical_gradient' )
477	READ ( 13 ) pt_vertical_gradient
478	CASE ( 'pt_vertical_gradient_level' )
479	READ ( 13 ) pt_vertical_gradient_level
480	CASE ( 'pt_vertical_gradient_level_ind' )
481	READ ( 13 ) pt_vertical_gradient_level_ind
482	CASE ( 'q_init' )
483	READ ( 13 ) q_init
484	CASE ( 'q_surface' )
485	READ ( 13 ) q_surface
486	CASE ( 'q_surface_initial_change' )
487	READ ( 13 ) q_surface_initial_change
488	CASE ( 'q_vertical_gradient' )
489	READ ( 13 ) q_vertical_gradient
490	CASE ( 'q_vertical_gradient_level' )
491	READ ( 13 ) q_vertical_gradient_level
492	CASE ( 'q_vertical_gradient_level_ind' )
493	READ ( 13 ) q_vertical_gradient_level_ind
494	CASE ( 'radiation' )
495	READ ( 13 ) radiation
496	CASE ( 'random_generator' )
497	READ ( 13 ) random_generator
498	CASE ( 'random_heatflux' )
499	READ ( 13 ) random_heatflux
500	CASE ( 'rayleigh_damping_factor' )
501	READ ( 13 ) rayleigh_damping_factor
502	CASE ( 'rayleigh_damping_height' )
503	READ ( 13 ) rayleigh_damping_height
504	CASE ( 'recycling_width' )
505	READ ( 13 ) recycling_width
506	CASE ( 'residual_limit' )
507	READ ( 13 ) residual_limit
508	CASE ( 'rif_max' )
509	READ ( 13 ) rif_max
510	CASE ( 'rif_min' )
511	READ ( 13 ) rif_min
512	CASE ( 'roughness_length' )
513	READ ( 13 ) roughness_length
514	CASE ( 'runnr' )
515	READ ( 13 ) runnr
516	CASE ( 'run_coupled' )
517	READ ( 13 ) run_coupled
518	CASE ( 'sa_init' )
519	READ ( 13 ) sa_init
520	CASE ( 'sa_surface' )
521	READ ( 13 ) sa_surface
522	CASE ( 'sa_vertical_gradient' )
523	READ ( 13 ) sa_vertical_gradient
524	CASE ( 'sa_vertical_gradient_level' )
525	READ ( 13 ) sa_vertical_gradient_level
526	CASE ( 'scalar_advec' )
527	READ ( 13 ) scalar_advec
528	CASE ( 'scalar_exchange_coefficient' )
529	READ ( 13 ) scalar_exchange_coefficient
530	CASE ( 'simulated_time' )
531	READ ( 13 ) simulated_time
532	CASE ( 'surface_heatflux' )
533	READ ( 13 ) surface_heatflux
534	CASE ( 'surface_pressure' )
535	READ ( 13 ) surface_pressure
536	CASE ( 'surface_scalarflux' )
537	READ ( 13 ) surface_scalarflux
538	CASE ( 'surface_waterflux' )
539	READ ( 13 ) surface_waterflux
540	CASE ( 's_surface' )
541	READ ( 13 ) s_surface
542	CASE ( 's_surface_initial_change' )
543	READ ( 13 ) s_surface_initial_change
544	CASE ( 's_vertical_gradient' )
545	READ ( 13 ) s_vertical_gradient
546	CASE ( 's_vertical_gradient_level' )
547	READ ( 13 ) s_vertical_gradient_level
548	CASE ( 'time_coupling' )
549	READ ( 13 ) time_coupling
550	CASE ( 'time_disturb' )
551	READ ( 13 ) time_disturb
552	CASE ( 'time_dopr' )
553	READ ( 13 ) time_dopr
554	CASE ( 'time_domask' )
555	READ ( 13 ) time_domask
556	CASE ( 'time_dopr_av' )
557	READ ( 13 ) time_dopr_av
558	CASE ( 'time_dopr_listing' )
559	READ ( 13 ) time_dopr_listing
560	CASE ( 'time_dopts' )
561	READ ( 13 ) time_dopts
562	CASE ( 'time_dosp' )
563	READ ( 13 ) time_dosp
564	CASE ( 'time_dots' )
565	READ ( 13 ) time_dots
566	CASE ( 'time_do2d_xy' )
567	READ ( 13 ) time_do2d_xy
568	CASE ( 'time_do2d_xz' )
569	READ ( 13 ) time_do2d_xz
570	CASE ( 'time_do2d_yz' )
571	READ ( 13 ) time_do2d_yz
572	CASE ( 'time_do3d' )
573	READ ( 13 ) time_do3d
574	CASE ( 'time_do_av' )
575	READ ( 13 ) time_do_av
576	CASE ( 'time_do_sla' )
577	READ ( 13 ) time_do_sla
578	CASE ( 'time_dvrp' )
579	READ ( 13 ) time_dvrp
580	CASE ( 'time_restart' )
581	READ ( 13 ) time_restart
582	CASE ( 'time_run_control' )
583	READ ( 13 ) time_run_control
584	CASE ( 'time_since_reference_point' )
585	READ ( 13 ) time_since_reference_point
586	CASE ( 'time_sort_particles' )
587	READ ( 13 ) time_sort_particles
588	CASE ( 'timestep_scheme' )
589	READ ( 13 ) timestep_scheme
590	CASE ( 'topography' )
591	READ ( 13 ) topography
592	CASE ( 'topography_grid_convention' )
593	READ ( 13 ) topography_grid_convention
594	CASE ( 'top_heatflux' )
595	READ ( 13 ) top_heatflux
596	CASE ( 'top_momentumflux_u' )
597	READ ( 13 ) top_momentumflux_u
598	CASE ( 'top_momentumflux_v' )
599	READ ( 13 ) top_momentumflux_v
600	CASE ( 'top_salinityflux' )
601	READ ( 13 ) top_salinityflux
602	CASE ( 'tsc' )
603	READ ( 13 ) tsc
604	CASE ( 'turbulent_inflow' )
605	READ ( 13 ) turbulent_inflow
606	CASE ( 'u_bulk' )
607	READ ( 13 ) u_bulk
608	CASE ( 'u_init' )
609	READ ( 13 ) u_init
610	CASE ( 'u_max' )
611	READ ( 13 ) u_max
612	CASE ( 'u_max_ijk' )
613	READ ( 13 ) u_max_ijk
614	CASE ( 'ug' )
615	READ ( 13 ) ug
616	CASE ( 'ug_surface' )
617	READ ( 13 ) ug_surface
618	CASE ( 'ug_vertical_gradient' )
619	READ ( 13 ) ug_vertical_gradient
620	CASE ( 'ug_vertical_gradient_level' )
621	READ ( 13 ) ug_vertical_gradient_level
622	CASE ( 'ug_vertical_gradient_level_ind' )
623	READ ( 13 ) ug_vertical_gradient_level_ind
624	CASE ( 'ups_limit_e' )
625	READ ( 13 ) ups_limit_e
626	CASE ( 'ups_limit_pt' )
627	READ ( 13 ) ups_limit_pt
628	CASE ( 'ups_limit_u' )
629	READ ( 13 ) ups_limit_u
630	CASE ( 'ups_limit_v' )
631	READ ( 13 ) ups_limit_v
632	CASE ( 'ups_limit_w' )
633	READ ( 13 ) ups_limit_w
634	CASE ( 'use_surface_fluxes' )
635	READ ( 13 ) use_surface_fluxes
636	CASE ( 'use_top_fluxes' )
637	READ ( 13 ) use_top_fluxes
638	CASE ( 'use_ug_for_galilei_tr' )
639	READ ( 13 ) use_ug_for_galilei_tr
640	CASE ( 'use_upstream_for_tke' )
641	READ ( 13 ) use_upstream_for_tke
642	CASE ( 'v_bulk' )
643	READ ( 13 ) v_bulk
644	CASE ( 'v_init' )
645	READ ( 13 ) v_init
646	CASE ( 'v_max' )
647	READ ( 13 ) v_max
648	CASE ( 'v_max_ijk' )
649	READ ( 13 ) v_max_ijk
650	CASE ( 'vg' )
651	READ ( 13 ) vg
652	CASE ( 'vg_surface' )
653	READ ( 13 ) vg_surface
654	CASE ( 'vg_vertical_gradient' )
655	READ ( 13 ) vg_vertical_gradient
656	CASE ( 'vg_vertical_gradient_level' )
657	READ ( 13 ) vg_vertical_gradient_level
658	CASE ( 'vg_vertical_gradient_level_ind' )
659	READ ( 13 ) vg_vertical_gradient_level_ind
660	CASE ( 'volume_flow_area' )
661	READ ( 13 ) volume_flow_area
662	CASE ( 'volume_flow_initial' )
663	READ ( 13 ) volume_flow_initial
664	CASE ( 'wall_adjustment' )
665	READ ( 13 ) wall_adjustment
666	CASE ( 'subs_vertical_gradient' )
667	READ ( 13 ) subs_vertical_gradient
668	CASE ( 'subs_vertical_gradient_level' )
669	READ ( 13 ) subs_vertical_gradient_level
670	CASE ( 'subs_vertical_gradient_level_i' )
671	READ ( 13 ) subs_vertical_gradient_level_i
672	CASE ( 'w_max' )
673	READ ( 13 ) w_max
674	CASE ( 'w_max_ijk' )
675	READ ( 13 ) w_max_ijk
676
677	CASE DEFAULT
678	WRITE( message_string, * ) 'unknown variable named "', &
679	TRIM( variable_chr ), '" found in', &
680	' data from prior run on PE ', myid
681	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
682	END SELECT
683	!
684	!-- Read next string
685	READ ( 13 ) variable_chr
686
687	ENDDO
688
689
690	END SUBROUTINE read_var_list
691
692
693
694	SUBROUTINE read_parts_of_var_list
695
696	!------------------------------------------------------------------------------!
697	! Description:
698	! ------------
699	! Skipping the global control variables from restart-file (binary format)
700	! except some informations needed when reading restart data from a previous
701	! run which used a smaller total domain or/and a different domain decomposition.
702	!------------------------------------------------------------------------------!
703
704	USE arrays_3d
705	USE control_parameters
706	USE indices
707	USE pegrid
708	USE statistics
709
710	IMPLICIT NONE
711
712	CHARACTER (LEN=10) :: version_on_file
713	CHARACTER (LEN=30) :: variable_chr
714	CHARACTER (LEN=1) :: cdum
715
716	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
717	statistic_regions_on_file, tmp_mpru, tmp_sr
718
719	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
720	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
721
722
723	CALL check_open( 13 )
724
725	WRITE (9,*) 'rpovl: after check open 13'
726	CALL local_flush( 9 )
727	READ ( 13 ) version_on_file
728
729	!
730	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
731	!-- run
732	READ ( 13 ) variable_chr
733	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
734	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
735	'run on PE ', myid
736	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
737	ENDIF
738	READ ( 13 ) numprocs_previous_run
739
740	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
741	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
742	ENDIF
743
744	READ ( 13 ) variable_chr
745	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
746	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
747	'prior run on PE ', myid
748	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
749	ENDIF
750	READ ( 13 ) hor_index_bounds_previous_run
751
752	!
753	!-- Read vertical number of gridpoints and number of different areas used
754	!-- for computing statistics. Allocate arrays depending on these values,
755	!-- which are needed for the following read instructions.
756	READ ( 13 ) variable_chr
757	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
758	message_string = 'nz not found in restart data file'
759	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
760	ENDIF
761	READ ( 13 ) nz_on_file
762	IF ( nz_on_file /= nz ) THEN
763	WRITE( message_string, * ) 'mismatch concerning number of ', &
764	'gridpoints along z', &
765	'&nz on file = "', nz_on_file, '"', &
766	'&nz from run = "', nz, '"'
767	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
768	ENDIF
769
770	READ ( 13 ) variable_chr
771	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
772	message_string = 'max_pr_user not found in restart data file'
773	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
774	ENDIF
775	READ ( 13 ) max_pr_user_on_file
776	IF ( max_pr_user_on_file /= max_pr_user ) THEN
777	WRITE( message_string, * ) 'number of user profiles on res', &
778	'tart data file differs from the current ', &
779	'run&max_pr_user on file = "', &
780	max_pr_user_on_file, '"', &
781	'&max_pr_user from run = "', &
782	max_pr_user, '"'
783	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
784	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
785	ELSE
786	tmp_mpru = max_pr_user
787	ENDIF
788
789	READ ( 13 ) variable_chr
790	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
791	message_string = 'statistic_regions not found in restart data file'
792	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
793	ENDIF
794	READ ( 13 ) statistic_regions_on_file
795	IF ( statistic_regions_on_file /= statistic_regions ) THEN
796	WRITE( message_string, * ) 'statistic regions on restart data file ',&
797	'differ from the current run', &
798	'&statistic regions on file = "', &
799	statistic_regions_on_file, '"', &
800	'&statistic regions from run = "', &
801	statistic_regions, '"', &
802	'&statistic data may be lost!'
803	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
804	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
805	ELSE
806	tmp_sr = statistic_regions
807	ENDIF
808
809
810	!
811	!-- Now read and check some control parameters and skip the rest
812	WRITE (9,*) 'wpovl: begin reading variables'
813	CALL local_flush( 9 )
814	READ ( 13 ) variable_chr
815
816	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
817
818	SELECT CASE ( TRIM( variable_chr ) )
819
820	CASE ( 'average_count_pr' )
821	READ ( 13 ) average_count_pr
822	IF ( average_count_pr /= 0 ) THEN
823	WRITE( message_string, * ) 'inflow profiles not temporally ', &
824	'averaged. &Averaging will be done now using ', &
825	average_count_pr, ' samples.'
826	CALL message( 'read_parts_of_var_list', 'PA0309', &
827	0, 1, 0, 6, 0 )
828	ENDIF
829
830	CASE ( 'hom' )
831	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
832	0:statistic_regions_on_file) )
833	READ ( 13 ) hom_on_file
834	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
835	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
836	DEALLOCATE( hom_on_file )
837
838	CASE ( 'hom_sum' )
839	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
840	0:statistic_regions_on_file) )
841	READ ( 13 ) hom_sum_on_file
842	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
843	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
844	DEALLOCATE( hom_sum_on_file )
845
846	CASE ( 'nx' )
847	READ ( 13 ) nx_on_file
848
849	CASE ( 'ny' )
850	READ ( 13 ) ny_on_file
851
852
853	CASE DEFAULT
854
855	READ ( 13 ) cdum
856
857	END SELECT
858
859	READ ( 13 ) variable_chr
860
861	ENDDO
862
863	!
864	!-- Calculate the temporal average of vertical profiles, if neccessary
865	IF ( average_count_pr /= 0 ) THEN
866	hom_sum = hom_sum / REAL( average_count_pr )
867	ENDIF
868
869
870	END SUBROUTINE read_parts_of_var_list
871
872
873
874	SUBROUTINE skip_var_list
875
876	!------------------------------------------------------------------------------!
877	! Description:
878	! ------------
879	! Skipping the global control variables from restart-file (binary format)
880	!------------------------------------------------------------------------------!
881
882	IMPLICIT NONE
883
884	CHARACTER (LEN=10) :: version_on_file
885	CHARACTER (LEN=30) :: variable_chr
886
887	CHARACTER (LEN=1) :: cdum
888
889
890	WRITE (9,*) 'skipvl #1'
891	CALL local_flush( 9 )
892	READ ( 13 ) version_on_file
893
894	WRITE (9,*) 'skipvl before variable_chr'
895	CALL local_flush( 9 )
896	READ ( 13 ) variable_chr
897	WRITE (9,*) 'skipvl after variable_chr'
898	CALL local_flush( 9 )
899
900	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
901
902	WRITE (9,*) 'skipvl chr = ', variable_chr
903	CALL local_flush( 9 )
904	READ ( 13 ) cdum
905	READ ( 13 ) variable_chr
906
907	ENDDO
908	WRITE (9,*) 'skipvl last'
909	CALL local_flush( 9 )
910
911
912	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |