Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2572

Last change on this file since 2572 was 2563, checked in by Giersch, 7 years ago
Restart runs with the usage of the wind turbine model are possible now. Further small at reading/writing restart data
Property svn:keywords set to `Id`
File size: 39.7 KB

Line
1	!> @file read_var_list.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of PALM.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2017 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: read_var_list.f90 2563 2017-10-19 15:36:10Z scharf $
27	! CALL stg_read_restart_data moved to synthetic_turbulence_generator_mod and
28	! CALL flight_read_restart_data moved to virtual_flights_mod. Furthermore
29	! * end default * marks the end of the standard parameter list of restart
30	! files and * end * marks the end of all parameter including module
31	! parameter. Therefore the call of flight_skip_var_list becomes unnecessary.
32	!
33	! 2372 2017-08-25 12:37:32Z sward
34	! y_shift added to vars, version no. increased
35	!
36	! 2365 2017-08-21 14:59:59Z kanani
37	! Vertical grid nesting implemented (SadiqHuq)
38	!
39	! 2339 2017-08-07 13:55:26Z gronemeier
40	! corrected timestamp in header
41	!
42	! 2338 2017-08-07 12:15:38Z gronemeier
43	! Modularize 1D model
44	!
45	! 2320 2017-07-21 12:47:43Z suehring
46	! Formatting adjustment
47	!
48	! 2265 2017-06-08 16:58:28Z schwenkel
49	! Unused variables removed.
50	!
51	! 2259 2017-06-08 09:09:11Z gronemeier
52	! Implemented synthetic turbulence generator
53	!
54	! 2233 2017-05-30 18:08:54Z suehring
55	!
56	! 2232 2017-05-30 17:47:52Z suehring
57	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
58	! wall_salinityflux
59	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
60	! tunnel_wall_depth
61	!
62	! 2042 2016-11-02 13:47:31Z suehring
63	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
64	!
65	! 2000 2016-08-20 18:09:15Z knoop
66	! Forced header and separation lines into 80 columns
67	!
68	! 1992 2016-08-12 15:14:59Z suehring
69	! top_scalarflux added
70	!
71	! 1960 2016-07-12 16:34:24Z suehring
72	! Separate humidity and passive scalar
73	! Remove unused variables from ONLY list
74	!
75	! 1957 2016-07-07 10:43:48Z suehring
76	! flight module added
77	!
78	! 1849 2016-04-08 11:33:18Z hoffmann
79	! Adapted for modularization of microphysics
80	!
81	! 1833 2016-04-07 14:23:03Z raasch
82	! spectra_mod added
83	!
84	! 1831 2016-04-07 13:15:51Z hoffmann
85	! turbulence renamed collision_turbulence, drizzle renamed
86	! cloud_water_sedimentation
87	!
88	! 1808 2016-04-05 19:44:00Z raasch
89	! test output removed
90	!
91	! 1783 2016-03-06 18:36:17Z raasch
92	! netcdf module name changed + related changes
93	!
94	! 1699 2015-10-29 08:02:35Z maronga
95	! Bugfix: update of binary version from 3.9b to 4.0 was missing
96	!
97	! 1691 2015-10-26 16:17:44Z maronga
98	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
99	! output of prandtl_layer and rif_min, rif_max.
100	!
101	! 1682 2015-10-07 23:56:08Z knoop
102	! Code annotations made doxygen readable
103	!
104	! 1615 2015-07-08 18:49:19Z suehring
105	! Enable turbulent inflow for passive_scalar and humidity
106	!
107	! 1585 2015-04-30 07:05:52Z maronga
108	! Adapted for RRTMG
109	!
110	! 1560 2015-03-06 10:48:54Z keck
111	! +recycling_yshift
112	!
113	! 1522 2015-01-14 10:53:12Z keck
114	! added query for checking if the advection scheme in the restart run is the
115	! same as the advection scheme in the corresponding initial run
116	!
117	! 1502 2014-12-03 18:22:31Z kanani
118	! Canopy module and parameters removed (parameters are always read from
119	! canopy_par NAMELIST for initial and restart runs)
120	!
121	! 1496 2014-12-02 17:25:50Z maronga
122	! Renamed "radiation" -> "cloud_top_radiation"
123	!
124	! 1484 2014-10-21 10:53:05Z kanani
125	! Changes in the course of the canopy-model modularization:
126	! parameters alpha_lad, beta_lad, lai_beta added,
127	! module plant_canopy_model_mod added,
128	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
129	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
130	!
131	! 1322 2014-03-20 16:38:49Z raasch
132	! REAL functions provided with KIND-attribute
133	!
134	! 1320 2014-03-20 08:40:49Z raasch
135	! ONLY-attribute added to USE-statements,
136	! kind-parameters added to all INTEGER and REAL declaration statements,
137	! kinds are defined in new module kinds,
138	! old module precision_kind is removed,
139	! revision history before 2012 removed,
140	! comment fields (!:) to be used for variable explanations added to
141	! all variable declaration statements
142	!
143	! 1308 2014-03-13 14:58:42Z fricke
144	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
145	! +do3d_time_count
146	!
147	! 1253 2013-11-07 10:48:12Z fricke
148	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
149	! is zero for initializing_actions = 'cyclic_fill'
150	!
151	! 1241 2013-10-30 11:36:58Z heinze
152	! +nudging
153	! +large_scale_forcing
154	!
155	! 1195 2013-07-01 12:27:57Z heinze
156	! Bugfix: allocate ref_state
157	!
158	! 1179 2013-06-14 05:57:58Z raasch
159	! +ref_state
160	!
161	! 1115 2013-03-26 18:16:16Z hoffmann
162	! unused variables removed
163	!
164	! 1092 2013-02-02 11:24:22Z raasch
165	! unused variables removed
166	!
167	! 1065 2012-11-22 17:42:36Z hoffmann
168	! +nc, c_sedimentation, limiter_sedimentation, turbulence
169	! -mu_constant, mu_constant_value
170	!
171	! 1053 2012-11-13 17:11:03Z hoffmann
172	! necessary expansions according to the two new prognostic equations (nr, qr)
173	! of the two-moment cloud physics scheme:
174	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
175	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
176	! +surface_waterflux_*
177	!
178	! in addition, steering parameters parameters of the two-moment cloud physics
179	! scheme:
180	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
181	!
182	! 1036 2012-10-22 13:43:42Z raasch
183	! code put under GPL (PALM 3.9)
184	!
185	! 1015 2012-09-27 09:23:24Z raasch
186	! -adjust_mixing_length
187	!
188	! 1003 2012-09-14 14:35:53Z raasch
189	! -grid_matching
190	!
191	! 1001 2012-09-13 14:08:46Z raasch
192	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
193	! overshoot_limit_, ups_limit_
194	!
195	! 978 2012-08-09 08:28:32Z fricke
196	! -km_damp_max, outflow_damping_width
197	! +pt_damping_factor, pt_damping_width
198	! +z0h_factor
199	!
200	! 940 2012-07-09 14:31:00Z raasch
201	! +neutral
202	!
203	! 927 2012-06-06 19:15:04Z raasch
204	! +masking_method
205	!
206	! 849 2012-03-15 10:35:09Z raasch
207	! first_call_advec_particles renamed first_call_lpm
208	!
209	! 824 2012-02-17 09:09:57Z raasch
210	! +curvature_solution_effects
211	!
212	! Revision 1.1 1998/03/18 20:18:48 raasch
213	! Initial revision
214	!
215	!
216	! Description:
217	! ------------
218	!> Reading values of global control variables from restart-file (binary format)
219	!------------------------------------------------------------------------------!
220	SUBROUTINE read_var_list
221
222
223	USE arrays_3d, &
224	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
225	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
226
227	USE control_parameters
228
229	USE grid_variables, &
230	ONLY: dx, dy
231
232	USE indices, &
233	ONLY: nz, nx, nx_on_file, ny, ny_on_file
234
235	USE microphysics_mod, &
236	ONLY: c_sedimentation, collision_turbulence, &
237	cloud_water_sedimentation, limiter_sedimentation, &
238	nc_const, ventilation_effect
239
240	USE model_1d_mod, &
241	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
242
243	USE netcdf_interface, &
244	ONLY: netcdf_precision, output_for_t0
245
246	USE particle_attributes, &
247	ONLY: curvature_solution_effects
248
249	USE pegrid
250
251	USE radiation_model_mod, &
252	ONLY: time_radiation
253
254	USE spectra_mod, &
255	ONLY: average_count_sp
256
257	USE statistics, &
258	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
259	v_max, v_max_ijk, w_max, w_max_ijk
260
261	USE vertical_nesting_mod, &
262	ONLY: vnest_init
263
264	IMPLICIT NONE
265
266	CHARACTER (LEN=10) :: binary_version, version_on_file
267	CHARACTER (LEN=30) :: variable_chr
268
269
270	CALL check_open( 13 )
271
272	!
273	!-- Make version number check first
274	READ ( 13 ) version_on_file
275	binary_version = '4.3'
276	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
277	WRITE( message_string, * ) 'version mismatch concerning control ', &
278	'variables', &
279	'&version on file = "', &
280	TRIM( version_on_file ), '"', &
281	'&version on program = "', &
282	TRIM( binary_version ), '"'
283	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
284	ENDIF
285
286	!
287	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
288	!-- run
289	READ ( 13 ) variable_chr
290	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
291	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
292	'run on PE ', myid
293	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
294	ENDIF
295	READ ( 13 ) numprocs_previous_run
296
297	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
298	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
299	ENDIF
300
301	READ ( 13 ) variable_chr
302	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
303	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
304	'prior run on PE ', myid
305	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
306	ENDIF
307	READ ( 13 ) hor_index_bounds_previous_run
308
309	!
310	!-- Read vertical number of gridpoints and number of different areas used
311	!-- for computing statistics. Allocate arrays depending on these values,
312	!-- which are needed for the following read instructions.
313	READ ( 13 ) variable_chr
314	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
315	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
316	myid
317	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
318	ENDIF
319	READ ( 13 ) nz
320
321	READ ( 13 ) variable_chr
322	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
323	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
324	'prior run on PE ', myid
325	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
326	ENDIF
327	READ ( 13 ) max_pr_user ! This value is checked against the number of
328	! user profiles given for the current run
329	! in routine user_parin (it has to match)
330
331	READ ( 13 ) variable_chr
332	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
333	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
334	'prior run on PE ', myid
335	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
336	ENDIF
337	READ ( 13 ) statistic_regions
338	IF ( .NOT. ALLOCATED( ug ) ) THEN
339	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
340	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
341	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
342	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
343	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
344	ENDIF
345
346	!
347	!-- Now read all control parameters:
348	!-- Caution: When the following read instructions have been changed, the
349	!-- ------- version number stored in the variable binary_version has to be
350	!-- increased. The same changes must also be done in write_var_list.
351	READ ( 13 ) variable_chr
352	DO WHILE ( TRIM( variable_chr ) /= '* end default *' )
353
354	SELECT CASE ( TRIM( variable_chr ) )
355
356	CASE ( 'advected_distance_x' )
357	READ ( 13 ) advected_distance_x
358	CASE ( 'advected_distance_y' )
359	READ ( 13 ) advected_distance_y
360	CASE ( 'alpha_surface' )
361	READ ( 13 ) alpha_surface
362	CASE ( 'average_count_pr' )
363	READ ( 13 ) average_count_pr
364	CASE ( 'average_count_sp' )
365	READ ( 13 ) average_count_sp
366	CASE ( 'average_count_3d' )
367	READ ( 13 ) average_count_3d
368	CASE ( 'bc_e_b' )
369	READ ( 13 ) bc_e_b
370	CASE ( 'bc_lr' )
371	READ ( 13 ) bc_lr
372	CASE ( 'bc_ns' )
373	READ ( 13 ) bc_ns
374	CASE ( 'bc_p_b' )
375	READ ( 13 ) bc_p_b
376	CASE ( 'bc_p_t' )
377	READ ( 13 ) bc_p_t
378	CASE ( 'bc_pt_b' )
379	READ ( 13 ) bc_pt_b
380	CASE ( 'bc_pt_t' )
381	READ ( 13 ) bc_pt_t
382	CASE ( 'bc_pt_t_val' )
383	READ ( 13 ) bc_pt_t_val
384	CASE ( 'bc_q_b' )
385	READ ( 13 ) bc_q_b
386	CASE ( 'bc_q_t' )
387	READ ( 13 ) bc_q_t
388	CASE ( 'bc_q_t_val' )
389	READ ( 13 ) bc_q_t_val
390	CASE ( 'bc_s_b' )
391	READ ( 13 ) bc_s_b
392	CASE ( 'bc_s_t' )
393	READ ( 13 ) bc_s_t
394	CASE ( 'bc_sa_t' )
395	READ ( 13 ) bc_sa_t
396	CASE ( 'bc_uv_b' )
397	READ ( 13 ) bc_uv_b
398	CASE ( 'bc_uv_t' )
399	READ ( 13 ) bc_uv_t
400	CASE ( 'bottom_salinityflux' )
401	READ ( 13 ) bottom_salinityflux
402	CASE ( 'building_height' )
403	READ ( 13 ) building_height
404	CASE ( 'building_length_x' )
405	READ ( 13 ) building_length_x
406	CASE ( 'building_length_y' )
407	READ ( 13 ) building_length_y
408	CASE ( 'building_wall_left' )
409	READ ( 13 ) building_wall_left
410	CASE ( 'building_wall_south' )
411	READ ( 13 ) building_wall_south
412	CASE ( 'call_psolver_at_all_substeps' )
413	READ ( 13 ) call_psolver_at_all_substeps
414	CASE ( 'canyon_height' )
415	READ ( 13 ) canyon_height
416	CASE ( 'canyon_width_x' )
417	READ ( 13 ) canyon_width_x
418	CASE ( 'canyon_width_y' )
419	READ ( 13 ) canyon_width_y
420	CASE ( 'canyon_wall_left' )
421	READ ( 13 ) canyon_wall_left
422	CASE ( 'canyon_wall_south' )
423	READ ( 13 ) canyon_wall_south
424	CASE ( 'c_sedimentation' )
425	READ ( 13 ) c_sedimentation
426	CASE ( 'cfl_factor' )
427	READ ( 13 ) cfl_factor
428	CASE ( 'cloud_droplets' )
429	READ ( 13 ) cloud_droplets
430	CASE ( 'cloud_physics' )
431	READ ( 13 ) cloud_physics
432	CASE ( 'cloud_scheme' )
433	READ ( 13 ) cloud_scheme
434	CASE ( 'collective_wait' )
435	READ ( 13 ) collective_wait
436	CASE ( 'conserve_volume_flow' )
437	READ ( 13 ) conserve_volume_flow
438	CASE ( 'conserve_volume_flow_mode' )
439	READ ( 13 ) conserve_volume_flow_mode
440	CASE ( 'constant_flux_layer' )
441	READ ( 13 ) constant_flux_layer
442	CASE ( 'coupling_start_time' )
443	READ ( 13 ) coupling_start_time
444	CASE ( 'current_timestep_number' )
445	READ ( 13 ) current_timestep_number
446	CASE ( 'curvature_solution_effects' )
447	READ ( 13 ) curvature_solution_effects
448	CASE ( 'cycle_mg' )
449	READ ( 13 ) cycle_mg
450	CASE ( 'damp_level_1d' )
451	READ ( 13 ) damp_level_1d
452	CASE ( 'dissipation_1d' )
453	READ ( 13 ) dissipation_1d
454	CASE ( 'do2d_xy_time_count' )
455	READ ( 13 ) do2d_xy_time_count
456	CASE ( 'do2d_xz_time_count' )
457	READ ( 13 ) do2d_xz_time_count
458	CASE ( 'do2d_yz_time_count' )
459	READ ( 13 ) do2d_yz_time_count
460	CASE ( 'do3d_time_count' )
461	READ ( 13 ) do3d_time_count
462	CASE ( 'dp_external' )
463	READ ( 13 ) dp_external
464	CASE ( 'dp_level_b' )
465	READ ( 13 ) dp_level_b
466	CASE ( 'dp_smooth' )
467	READ ( 13 ) dp_smooth
468	CASE ( 'dpdxy' )
469	READ ( 13 ) dpdxy
470	CASE ( 'cloud_water_sedimentation' )
471	READ ( 13 ) cloud_water_sedimentation
472	CASE ( 'dt_pr_1d' )
473	READ ( 13 ) dt_pr_1d
474	CASE ( 'dt_run_control_1d' )
475	READ ( 13 ) dt_run_control_1d
476	CASE ( 'dt_3d' )
477	READ ( 13 ) dt_3d
478	CASE ( 'dvrp_filecount' )
479	READ ( 13 ) dvrp_filecount
480	CASE ( 'dx' )
481	READ ( 13 ) dx
482	CASE ( 'dy' )
483	READ ( 13 ) dy
484	CASE ( 'dz' )
485	READ ( 13 ) dz
486	CASE ( 'dz_max' )
487	READ ( 13 ) dz_max
488	CASE ( 'dz_stretch_factor' )
489	READ ( 13 ) dz_stretch_factor
490	CASE ( 'dz_stretch_level' )
491	READ ( 13 ) dz_stretch_level
492	CASE ( 'e_min' )
493	READ ( 13 ) e_min
494	CASE ( 'end_time_1d' )
495	READ ( 13 ) end_time_1d
496	CASE ( 'fft_method' )
497	READ ( 13 ) fft_method
498	CASE ( 'first_call_lpm' )
499	READ ( 13 ) first_call_lpm
500	CASE ( 'galilei_transformation' )
501	READ ( 13 ) galilei_transformation
502	CASE ( 'hom' )
503	READ ( 13 ) hom
504	CASE ( 'hom_sum' )
505	READ ( 13 ) hom_sum
506	CASE ( 'humidity' )
507	READ ( 13 ) humidity
508	CASE ( 'inflow_damping_factor' )
509	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
510	ALLOCATE( inflow_damping_factor(0:nz+1) )
511	ENDIF
512	READ ( 13 ) inflow_damping_factor
513	CASE ( 'inflow_damping_height' )
514	READ ( 13 ) inflow_damping_height
515	CASE ( 'inflow_damping_width' )
516	READ ( 13 ) inflow_damping_width
517	CASE ( 'inflow_disturbance_begin' )
518	READ ( 13 ) inflow_disturbance_begin
519	CASE ( 'inflow_disturbance_end' )
520	READ ( 13 ) inflow_disturbance_end
521	CASE ( 'km_constant' )
522	READ ( 13 ) km_constant
523	CASE ( 'large_scale_forcing' )
524	READ ( 13 ) large_scale_forcing
525	CASE ( 'large_scale_subsidence' )
526	READ ( 13 ) large_scale_subsidence
527	CASE ( 'limiter_sedimentation' )
528	READ ( 13 ) limiter_sedimentation
529	CASE ( 'loop_optimization' )
530	READ ( 13 ) loop_optimization
531	CASE ( 'masking_method' )
532	READ ( 13 ) masking_method
533	CASE ( 'mean_inflow_profiles' )
534	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
535	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
536	ENDIF
537	READ ( 13 ) mean_inflow_profiles
538	CASE ( 'mg_cycles' )
539	READ ( 13 ) mg_cycles
540	CASE ( 'mg_switch_to_pe0_level' )
541	READ ( 13 ) mg_switch_to_pe0_level
542	CASE ( 'mixing_length_1d' )
543	READ ( 13 ) mixing_length_1d
544	CASE ( 'momentum_advec' )
545	READ ( 13 ) momentum_advec
546	CASE ( 'most_method' )
547	READ ( 13 ) most_method
548	CASE ( 'nc_const' )
549	READ ( 13 ) nc_const
550	CASE ( 'netcdf_precision' )
551	READ ( 13 ) netcdf_precision
552	CASE ( 'neutral' )
553	READ ( 13 ) neutral
554	CASE ( 'ngsrb' )
555	READ ( 13 ) ngsrb
556	CASE ( 'nsor' )
557	READ ( 13 ) nsor
558	CASE ( 'nsor_ini' )
559	READ ( 13 ) nsor_ini
560	CASE ( 'nudging' )
561	READ ( 13 ) nudging
562	CASE ( 'num_leg' )
563	READ ( 13 ) num_leg
564	CASE ( 'nx' )
565	READ ( 13 ) nx
566	nx_on_file = nx
567	CASE ( 'ny' )
568	READ ( 13 ) ny
569	ny_on_file = ny
570	CASE ( 'ocean' )
571	READ ( 13 ) ocean
572	CASE ( 'old_dt' )
573	READ ( 13 ) old_dt
574	CASE ( 'omega' )
575	READ ( 13 ) omega
576	CASE ( 'omega_sor' )
577	READ ( 13 ) omega_sor
578	CASE ( 'output_for_t0' )
579	READ (13) output_for_t0
580	CASE ( 'passive_scalar' )
581	READ ( 13 ) passive_scalar
582	CASE ( 'phi' )
583	READ ( 13 ) phi
584	CASE ( 'prandtl_number' )
585	READ ( 13 ) prandtl_number
586	CASE ( 'precipitation' )
587	READ ( 13 ) precipitation
588	CASE ( 'psolver' )
589	READ ( 13 ) psolver
590	CASE ( 'pt_damping_factor' )
591	READ ( 13 ) pt_damping_factor
592	CASE ( 'pt_damping_width' )
593	READ ( 13 ) pt_damping_width
594	CASE ( 'pt_init' )
595	READ ( 13 ) pt_init
596	CASE ( 'pt_reference' )
597	READ ( 13 ) pt_reference
598	CASE ( 'pt_surface' )
599	READ ( 13 ) pt_surface
600	CASE ( 'pt_surface_initial_change' )
601	READ ( 13 ) pt_surface_initial_change
602	CASE ( 'pt_vertical_gradient' )
603	READ ( 13 ) pt_vertical_gradient
604	CASE ( 'pt_vertical_gradient_level' )
605	READ ( 13 ) pt_vertical_gradient_level
606	CASE ( 'pt_vertical_gradient_level_ind' )
607	READ ( 13 ) pt_vertical_gradient_level_ind
608	CASE ( 'q_init' )
609	READ ( 13 ) q_init
610	CASE ( 'q_surface' )
611	READ ( 13 ) q_surface
612	CASE ( 'q_surface_initial_change' )
613	READ ( 13 ) q_surface_initial_change
614	CASE ( 'q_vertical_gradient' )
615	READ ( 13 ) q_vertical_gradient
616	CASE ( 'q_vertical_gradient_level' )
617	READ ( 13 ) q_vertical_gradient_level
618	CASE ( 'q_vertical_gradient_level_ind' )
619	READ ( 13 ) q_vertical_gradient_level_ind
620	CASE ( 'cloud_top_radiation' )
621	READ ( 13 ) cloud_top_radiation
622	CASE ( 'random_generator' )
623	READ ( 13 ) random_generator
624	CASE ( 'random_heatflux' )
625	READ ( 13 ) random_heatflux
626	CASE ( 'rayleigh_damping_factor' )
627	READ ( 13 ) rayleigh_damping_factor
628	CASE ( 'rayleigh_damping_height' )
629	READ ( 13 ) rayleigh_damping_height
630	CASE ( 'recycling_width' )
631	READ ( 13 ) recycling_width
632	CASE ( 'recycling_yshift' )
633	READ ( 13 ) recycling_yshift
634	CASE ( 'reference_state' )
635	READ ( 13 ) reference_state
636	CASE ( 'ref_state' )
637	READ ( 13 ) ref_state
638	CASE ( 'residual_limit' )
639	READ ( 13 ) residual_limit
640	CASE ( 'roughness_length' )
641	READ ( 13 ) roughness_length
642	CASE ( 'runnr' )
643	READ ( 13 ) runnr
644	CASE ( 'run_coupled' )
645	READ ( 13 ) run_coupled
646	CASE ( 's_init' )
647	READ ( 13 ) s_init
648	CASE ( 's_surface' )
649	READ ( 13 ) s_surface
650	CASE ( 's_surface_initial_change' )
651	READ ( 13 ) s_surface_initial_change
652	CASE ( 's_vertical_gradient' )
653	READ ( 13 ) s_vertical_gradient
654	CASE ( 's_vertical_gradient_level' )
655	READ ( 13 ) s_vertical_gradient_level
656	CASE ( 's_vertical_gradient_level_ind' )
657	READ ( 13 ) s_vertical_gradient_level_ind
658	CASE ( 'sa_init' )
659	READ ( 13 ) sa_init
660	CASE ( 'sa_surface' )
661	READ ( 13 ) sa_surface
662	CASE ( 'sa_vertical_gradient' )
663	READ ( 13 ) sa_vertical_gradient
664	CASE ( 'sa_vertical_gradient_level' )
665	READ ( 13 ) sa_vertical_gradient_level
666	CASE ( 'scalar_advec' )
667	READ ( 13 ) scalar_advec
668	CASE ( 'simulated_time' )
669	READ ( 13 ) simulated_time
670	CASE ( 'surface_heatflux' )
671	READ ( 13 ) surface_heatflux
672	CASE ( 'surface_pressure' )
673	READ ( 13 ) surface_pressure
674	CASE ( 'surface_scalarflux' )
675	READ ( 13 ) surface_scalarflux
676	CASE ( 'surface_waterflux' )
677	READ ( 13 ) surface_waterflux
678	CASE ( 'time_coupling' )
679	READ ( 13 ) time_coupling
680	CASE ( 'time_disturb' )
681	READ ( 13 ) time_disturb
682	CASE ( 'time_dopr' )
683	READ ( 13 ) time_dopr
684	CASE ( 'time_domask' )
685	READ ( 13 ) time_domask
686	CASE ( 'time_dopr_av' )
687	READ ( 13 ) time_dopr_av
688	CASE ( 'time_dopr_listing' )
689	READ ( 13 ) time_dopr_listing
690	CASE ( 'time_dopts' )
691	READ ( 13 ) time_dopts
692	CASE ( 'time_dosp' )
693	READ ( 13 ) time_dosp
694	CASE ( 'time_dots' )
695	READ ( 13 ) time_dots
696	CASE ( 'time_do2d_xy' )
697	READ ( 13 ) time_do2d_xy
698	CASE ( 'time_do2d_xz' )
699	READ ( 13 ) time_do2d_xz
700	CASE ( 'time_do2d_yz' )
701	READ ( 13 ) time_do2d_yz
702	CASE ( 'time_do3d' )
703	READ ( 13 ) time_do3d
704	CASE ( 'time_do_av' )
705	READ ( 13 ) time_do_av
706	CASE ( 'time_do_sla' )
707	READ ( 13 ) time_do_sla
708	CASE ( 'time_dvrp' )
709	READ ( 13 ) time_dvrp
710	CASE ( 'time_radiation' )
711	READ ( 13 ) time_radiation
712	CASE ( 'time_restart' )
713	READ ( 13 ) time_restart
714	CASE ( 'time_run_control' )
715	READ ( 13 ) time_run_control
716	CASE ( 'time_since_reference_point' )
717	READ ( 13 ) time_since_reference_point
718	CASE ( 'timestep_scheme' )
719	READ ( 13 ) timestep_scheme
720	CASE ( 'topography' )
721	READ ( 13 ) topography
722	CASE ( 'topography_grid_convention' )
723	READ ( 13 ) topography_grid_convention
724	CASE ( 'top_heatflux' )
725	READ ( 13 ) top_heatflux
726	CASE ( 'top_momentumflux_u' )
727	READ ( 13 ) top_momentumflux_u
728	CASE ( 'top_momentumflux_v' )
729	READ ( 13 ) top_momentumflux_v
730	CASE ( 'top_salinityflux' )
731	READ ( 13 ) top_salinityflux
732	CASE ( 'top_scalarflux' )
733	READ ( 13 ) top_scalarflux
734	CASE ( 'tsc' )
735	READ ( 13 ) tsc
736	CASE ( 'collision_turbulence' )
737	READ ( 13 ) collision_turbulence
738	CASE ( 'tunnel_height' )
739	READ ( 13 ) tunnel_height
740	CASE ( 'tunnel_length' )
741	READ ( 13 ) tunnel_length
742	CASE ( 'tunnel_width_x' )
743	READ ( 13 ) tunnel_width_x
744	CASE ( 'tunnel_width_y' )
745	READ ( 13 ) tunnel_width_y
746	CASE ( 'tunnel_wall_depth' )
747	READ ( 13 ) tunnel_wall_depth
748	CASE ( 'turbulent_inflow' )
749	READ ( 13 ) turbulent_inflow
750	CASE ( 'u_bulk' )
751	READ ( 13 ) u_bulk
752	CASE ( 'u_init' )
753	READ ( 13 ) u_init
754	CASE ( 'u_max' )
755	READ ( 13 ) u_max
756	CASE ( 'u_max_ijk' )
757	READ ( 13 ) u_max_ijk
758	CASE ( 'ug' )
759	READ ( 13 ) ug
760	CASE ( 'ug_surface' )
761	READ ( 13 ) ug_surface
762	CASE ( 'ug_vertical_gradient' )
763	READ ( 13 ) ug_vertical_gradient
764	CASE ( 'ug_vertical_gradient_level' )
765	READ ( 13 ) ug_vertical_gradient_level
766	CASE ( 'ug_vertical_gradient_level_ind' )
767	READ ( 13 ) ug_vertical_gradient_level_ind
768	CASE ( 'use_surface_fluxes' )
769	READ ( 13 ) use_surface_fluxes
770	CASE ( 'use_top_fluxes' )
771	READ ( 13 ) use_top_fluxes
772	CASE ( 'use_ug_for_galilei_tr' )
773	READ ( 13 ) use_ug_for_galilei_tr
774	CASE ( 'use_upstream_for_tke' )
775	READ ( 13 ) use_upstream_for_tke
776	CASE ( 'v_bulk' )
777	READ ( 13 ) v_bulk
778	CASE ( 'v_init' )
779	READ ( 13 ) v_init
780	CASE ( 'v_max' )
781	READ ( 13 ) v_max
782	CASE ( 'v_max_ijk' )
783	READ ( 13 ) v_max_ijk
784	CASE ( 'ventilation_effect' )
785	READ ( 13 ) ventilation_effect
786	CASE ( 'vg' )
787	READ ( 13 ) vg
788	CASE ( 'vg_surface' )
789	READ ( 13 ) vg_surface
790	CASE ( 'vg_vertical_gradient' )
791	READ ( 13 ) vg_vertical_gradient
792	CASE ( 'vg_vertical_gradient_level' )
793	READ ( 13 ) vg_vertical_gradient_level
794	CASE ( 'vg_vertical_gradient_level_ind' )
795	READ ( 13 ) vg_vertical_gradient_level_ind
796	CASE ( 'virtual_flight' )
797	READ ( 13 ) virtual_flight
798	CASE ( 'vnest_init' )
799	READ ( 13 ) vnest_init
800	CASE ( 'volume_flow_area' )
801	READ ( 13 ) volume_flow_area
802	CASE ( 'volume_flow_initial' )
803	READ ( 13 ) volume_flow_initial
804	CASE ( 'wall_adjustment' )
805	READ ( 13 ) wall_adjustment
806	CASE ( 'subs_vertical_gradient' )
807	READ ( 13 ) subs_vertical_gradient
808	CASE ( 'subs_vertical_gradient_level' )
809	READ ( 13 ) subs_vertical_gradient_level
810	CASE ( 'subs_vertical_gradient_level_i' )
811	READ ( 13 ) subs_vertical_gradient_level_i
812	CASE ( 'wall_heatflux' )
813	READ ( 13 ) wall_heatflux
814	CASE ( 'wall_humidityflux' )
815	READ ( 13 ) wall_humidityflux
816	CASE ( 'wall_scalarflux' )
817	READ ( 13 ) wall_scalarflux
818	CASE ( 'wall_salinityflux' )
819	READ ( 13 ) wall_salinityflux
820	CASE ( 'w_max' )
821	READ ( 13 ) w_max
822	CASE ( 'w_max_ijk' )
823	READ ( 13 ) w_max_ijk
824	CASE ( 'y_shift' )
825	READ ( 13 ) y_shift
826	CASE ( 'zeta_max' )
827	READ ( 13 ) zeta_max
828	CASE ( 'zeta_min' )
829	READ ( 13 ) zeta_min
830	CASE ( 'z0h_factor' )
831	READ ( 13 ) z0h_factor
832
833	CASE DEFAULT
834	WRITE( message_string, * ) 'unknown variable named "', &
835	TRIM( variable_chr ), '" found in', &
836	' data from prior run on PE ', myid
837	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
838	END SELECT
839	!
840	!-- Read next string
841	READ ( 13 ) variable_chr
842
843	ENDDO
844
845
846	END SUBROUTINE read_var_list
847
848
849
850	!------------------------------------------------------------------------------!
851	! Description:
852	! ------------
853	!> Skipping the global control variables from restart-file (binary format)
854	!> except some information needed when reading restart data from a previous
855	!> run which used a smaller total domain or/and a different domain decomposition.
856	!------------------------------------------------------------------------------!
857
858	SUBROUTINE read_parts_of_var_list
859
860
861	USE arrays_3d, &
862	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
863
864	USE control_parameters
865
866	USE indices, &
867	ONLY: nz, nx, nx_on_file, ny, ny_on_file
868
869	USE kinds
870
871	USE pegrid
872
873	USE statistics, &
874	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
875	v_max, v_max_ijk, w_max, w_max_ijk
876
877	IMPLICIT NONE
878
879	CHARACTER (LEN=10) :: version_on_file
880	CHARACTER (LEN=20) :: momentum_advec_check
881	CHARACTER (LEN=20) :: scalar_advec_check
882	CHARACTER (LEN=30) :: variable_chr
883	CHARACTER (LEN=1) :: cdum
884
885	INTEGER(iwp) :: max_pr_user_on_file
886	INTEGER(iwp) :: nz_on_file
887	INTEGER(iwp) :: statistic_regions_on_file
888	INTEGER(iwp) :: tmp_mpru
889	INTEGER(iwp) :: tmp_sr
890
891	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
892	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
893
894
895	CALL check_open( 13 )
896
897	READ ( 13 ) version_on_file
898
899
900	!
901	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
902	!-- run
903	READ ( 13 ) variable_chr
904	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
905	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
906	'run on PE ', myid
907	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
908	ENDIF
909	READ ( 13 ) numprocs_previous_run
910
911	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
912	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
913	ENDIF
914
915	READ ( 13 ) variable_chr
916	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
917	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
918	'prior run on PE ', myid
919	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
920	ENDIF
921	READ ( 13 ) hor_index_bounds_previous_run
922
923	!
924	!-- Read vertical number of gridpoints and number of different areas used
925	!-- for computing statistics. Allocate arrays depending on these values,
926	!-- which are needed for the following read instructions.
927	READ ( 13 ) variable_chr
928	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
929	message_string = 'nz not found in restart data file'
930	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
931	ENDIF
932	READ ( 13 ) nz_on_file
933	IF ( nz_on_file /= nz ) THEN
934	WRITE( message_string, * ) 'mismatch concerning number of ', &
935	'gridpoints along z', &
936	'&nz on file = "', nz_on_file, '"', &
937	'&nz from run = "', nz, '"'
938	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
939	ENDIF
940
941	READ ( 13 ) variable_chr
942	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
943	message_string = 'max_pr_user not found in restart data file'
944	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
945	ENDIF
946	READ ( 13 ) max_pr_user_on_file
947	IF ( max_pr_user_on_file /= max_pr_user ) THEN
948	WRITE( message_string, * ) 'number of user profiles on res', &
949	'tart data file differs from the current ', &
950	'run&max_pr_user on file = "', &
951	max_pr_user_on_file, '"', &
952	'&max_pr_user from run = "', &
953	max_pr_user, '"'
954	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
955	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
956	ELSE
957	tmp_mpru = max_pr_user
958	ENDIF
959
960	READ ( 13 ) variable_chr
961	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
962	message_string = 'statistic_regions not found in restart data file'
963	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
964	ENDIF
965	READ ( 13 ) statistic_regions_on_file
966	IF ( statistic_regions_on_file /= statistic_regions ) THEN
967	WRITE( message_string, * ) 'statistic regions on restart data file ',&
968	'differ from the current run', &
969	'&statistic regions on file = "', &
970	statistic_regions_on_file, '"', &
971	'&statistic regions from run = "', &
972	statistic_regions, '"', &
973	'&statistic data may be lost!'
974	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
975	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
976	ELSE
977	tmp_sr = statistic_regions
978	ENDIF
979
980	!
981	!-- Now read and check some control parameters and skip the rest
982	READ ( 13 ) variable_chr
983
984	DO WHILE ( TRIM( variable_chr ) /= '* end default *' )
985
986	SELECT CASE ( TRIM( variable_chr ) )
987
988	CASE ( 'average_count_pr' )
989	READ ( 13 ) average_count_pr
990	IF ( average_count_pr /= 0 ) THEN
991	WRITE( message_string, * ) 'inflow profiles not temporally ', &
992	'averaged. &Averaging will be done now using ', &
993	average_count_pr, ' samples.'
994	CALL message( 'read_parts_of_var_list', 'PA0309', &
995	0, 1, 0, 6, 0 )
996	ENDIF
997
998	CASE ( 'hom' )
999	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
1000	0:statistic_regions_on_file) )
1001	READ ( 13 ) hom_on_file
1002	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
1003	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
1004	DEALLOCATE( hom_on_file )
1005
1006	CASE ( 'hom_sum' )
1007	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
1008	0:statistic_regions_on_file) )
1009	READ ( 13 ) hom_sum_on_file
1010	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
1011	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
1012	DEALLOCATE( hom_sum_on_file )
1013
1014	CASE ( 'momentum_advec' )
1015	momentum_advec_check = momentum_advec
1016	READ ( 13 ) momentum_advec
1017	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
1018	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
1019	'differs from momentum_advec of the initial run.'
1020	CALL message( 'read_parts_of_var_list', 'PA0100', &
1021	1, 2, 0, 6, 0 )
1022	END IF
1023
1024	CASE ( 'nx' )
1025	READ ( 13 ) nx_on_file
1026
1027	CASE ( 'ny' )
1028	READ ( 13 ) ny_on_file
1029
1030	CASE ( 'ref_state' )
1031	READ ( 13 ) ref_state
1032
1033	CASE ( 'scalar_advec' )
1034	scalar_advec_check = scalar_advec
1035	READ ( 13 ) scalar_advec
1036	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
1037	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
1038	'differs from scalar_advec of the initial run.'
1039	CALL message( 'read_parts_of_var_list', 'PA0101', &
1040	1, 2, 0, 6, 0 )
1041	END IF
1042
1043	CASE DEFAULT
1044
1045	READ ( 13 ) cdum
1046
1047	END SELECT
1048
1049	READ ( 13 ) variable_chr
1050
1051	ENDDO
1052
1053	!
1054	!-- Calculate the temporal average of vertical profiles, if neccessary
1055	IF ( average_count_pr /= 0 ) THEN
1056	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
1057	ENDIF
1058
1059
1060	END SUBROUTINE read_parts_of_var_list
1061
1062
1063
1064	!------------------------------------------------------------------------------!
1065	! Description:
1066	! ------------
1067	!> Skipping the global control variables from restart-file (binary format)
1068	!------------------------------------------------------------------------------!
1069
1070	SUBROUTINE skip_var_list
1071
1072
1073	IMPLICIT NONE
1074
1075	CHARACTER (LEN=10) :: version_on_file
1076	CHARACTER (LEN=30) :: variable_chr
1077
1078	CHARACTER (LEN=1) :: cdum
1079
1080
1081	READ ( 13 ) version_on_file
1082
1083	READ ( 13 ) variable_chr
1084
1085	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
1086
1087	READ ( 13 ) cdum
1088	READ ( 13 ) variable_chr
1089
1090	ENDDO
1091
1092
1093	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |