Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1242

Last change on this file since 1242 was 1242, checked in by heinze, 10 years ago
Last commmit documented
Property svn:keywords set to `Id`
File size: 34.9 KB

Line
1	SUBROUTINE read_var_list
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: read_var_list.f90 1242 2013-10-30 11:50:11Z heinze $
27	!
28	! 1241 2013-10-30 11:36:58Z heinze
29	! +nudging
30	! +large_scale_forcing
31	!
32	! 1195 2013-07-01 12:27:57Z heinze
33	! Bugfix: allocate ref_state
34	!
35	! 1179 2013-06-14 05:57:58Z raasch
36	! +ref_state
37	!
38	! 1115 2013-03-26 18:16:16Z hoffmann
39	! unused variables removed
40	!
41	! 1092 2013-02-02 11:24:22Z raasch
42	! unused variables removed
43	!
44	! 1065 2012-11-22 17:42:36Z hoffmann
45	! +nc, c_sedimentation, limiter_sedimentation, turbulence
46	! -mu_constant, mu_constant_value
47	!
48	! 1053 2012-11-13 17:11:03Z hoffmann
49	! necessary expansions according to the two new prognostic equations (nr, qr)
50	! of the two-moment cloud physics scheme:
51	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
52	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
53	! +surface_waterflux_*
54	!
55	! in addition, steering parameters parameters of the two-moment cloud physics
56	! scheme:
57	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
58	!
59	! 1036 2012-10-22 13:43:42Z raasch
60	! code put under GPL (PALM 3.9)
61	!
62	! 1015 2012-09-27 09:23:24Z raasch
63	! -adjust_mixing_length
64	!
65	! 1003 2012-09-14 14:35:53Z raasch
66	! -grid_matching
67	!
68	! 1001 2012-09-13 14:08:46Z raasch
69	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
70	! overshoot_limit_, ups_limit_
71	!
72	! 978 2012-08-09 08:28:32Z fricke
73	! -km_damp_max, outflow_damping_width
74	! +pt_damping_factor, pt_damping_width
75	! +z0h_factor
76	!
77	! 940 2012-07-09 14:31:00Z raasch
78	! +neutral
79	!
80	! 927 2012-06-06 19:15:04Z raasch
81	! +masking_method
82	!
83	! 849 2012-03-15 10:35:09Z raasch
84	! first_call_advec_particles renamed first_call_lpm
85	!
86	! 824 2012-02-17 09:09:57Z raasch
87	! +curvature_solution_effects
88	!
89	! 626 2010-12-10 13:04:12Z suehring
90	! idum replaced by cdum in read_parts_of_var_list
91	!
92	! 622 2010-12-10 08:08:13Z raasch
93	! +collective_wait
94	!
95	! 600 2010-11-24 16:10:51Z raasch
96	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
97	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
98	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
99	! in routine skip_var_list (end of this file), variable ldum is replaced
100	! by cdum(LEN=1), because otherwise read errors (too few data on file)
101	! appear due to one of the additional parameters (cycle_mg) which are now
102	! stored on the restart file
103	!
104	! 591 2010-10-28 06:35:52Z helmke
105	! remove print command
106	!
107	! 587 2010-10-27 08:36:51Z helmke
108	! +time_domask
109	!
110	! 580 2010-10-05 13:59:11Z heinze
111	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
112	! ws_vertical_gradient_level to subs_vertical_gradient_level and
113	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
114	!
115	! 411 2009-12-11 14:15:58Z heinze
116	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
117	! ws_vertical_gradient_level_ind
118	!
119	! 345 2009-07-01 14:37:56Z heinze
120	! +output_for_t0
121	! dt_fixed is read into a dummy variable.
122	! Output of messages replaced by message handling routine.
123	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
124	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
125	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
126	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
127	!
128	! 216 2008-11-25 07:12:43Z raasch
129	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
130	!
131	! 173 2008-05-23 20:39:38Z raasch
132	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
133	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
134	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
135	! recycling_width, turbulent_inflow,
136	! -cross_ts_*, npex, npey,
137	! hom_sum, volume_flow_area, volume_flow_initial moved from
138	! read_3d_binary to here,
139	! routines read_parts_of_var_list and skip_var_list added at the end
140	!
141	! 138 2007-11-28 10:03:58Z letzel
142	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
143	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
144	! plant_canopy, time_sort_particles
145	!
146	! 102 2007-07-27 09:09:17Z raasch
147	! +time_coupling, top_momentumflux_u\|v
148	!
149	! 95 2007-06-02 16:48:38Z raasch
150	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
151	! sa_vertical_gradient_level, bottom/top_salinity_flux
152	!
153	! 87 2007-05-22 15:46:47Z raasch
154	! +max_pr_user (version 3.1), var_hom renamed pr_palm
155	!
156	! 75 2007-03-22 09:54:05Z raasch
157	! +loop_optimization, pt_reference, moisture renamed humidity
158	!
159	! 20 2007-02-26 00:12:32Z raasch
160	! +top_heatflux, use_top_fluxes
161	!
162	! RCS Log replace by Id keyword, revision history cleaned up
163	!
164	! Revision 1.34 2006/08/22 14:14:27 raasch
165	! +dz_max
166	!
167	! Revision 1.1 1998/03/18 20:18:48 raasch
168	! Initial revision
169	!
170	!
171	! Description:
172	! ------------
173	! Reading values of global control variables from restart-file (binary format)
174	!------------------------------------------------------------------------------!
175
176	USE arrays_3d
177	USE averaging
178	USE cloud_parameters
179	USE control_parameters
180	USE grid_variables
181	USE indices
182	USE model_1d
183	USE netcdf_control
184	USE particle_attributes
185	USE pegrid
186	USE profil_parameter
187	USE statistics
188
189	IMPLICIT NONE
190
191	CHARACTER (LEN=10) :: binary_version, version_on_file
192	CHARACTER (LEN=30) :: variable_chr
193
194
195	CALL check_open( 13 )
196
197	!
198	!-- Make version number check first
199	READ ( 13 ) version_on_file
200	binary_version = '3.9a'
201	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
202	WRITE( message_string, * ) 'version mismatch concerning control ', &
203	'variables', &
204	'&version on file = "', &
205	TRIM( version_on_file ), '"', &
206	'&version on program = "', &
207	TRIM( binary_version ), '"'
208	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
209	ENDIF
210
211	!
212	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
213	!-- run
214	READ ( 13 ) variable_chr
215	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
216	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
217	'run on PE ', myid
218	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
219	ENDIF
220	READ ( 13 ) numprocs_previous_run
221
222	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
223	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
224	ENDIF
225
226	READ ( 13 ) variable_chr
227	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
228	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
229	'prior run on PE ', myid
230	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
231	ENDIF
232	READ ( 13 ) hor_index_bounds_previous_run
233
234	!
235	!-- Read vertical number of gridpoints and number of different areas used
236	!-- for computing statistics. Allocate arrays depending on these values,
237	!-- which are needed for the following read instructions.
238	READ ( 13 ) variable_chr
239	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
240	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
241	myid
242	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
243	ENDIF
244	READ ( 13 ) nz
245
246	READ ( 13 ) variable_chr
247	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
248	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
249	'prior run on PE ', myid
250	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
251	ENDIF
252	READ ( 13 ) max_pr_user ! This value is checked against the number of
253	! user profiles given for the current run
254	! in routine user_parin (it has to match)
255
256	READ ( 13 ) variable_chr
257	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
258	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
259	'prior run on PE ', myid
260	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
261	ENDIF
262	READ ( 13 ) statistic_regions
263	IF ( .NOT. ALLOCATED( ug ) ) THEN
264	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
265	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
266	ref_state(0:nz+1), sa_init(0:nz+1), &
267	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
268	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
269	ENDIF
270
271	!
272	!-- Now read all control parameters:
273	!-- Caution: When the following read instructions have been changed, the
274	!-- ------- version number stored in the variable binary_version has to be
275	!-- increased. The same changes must also be done in write_var_list.
276	READ ( 13 ) variable_chr
277	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
278
279	SELECT CASE ( TRIM( variable_chr ) )
280
281	CASE ( 'advected_distance_x' )
282	READ ( 13 ) advected_distance_x
283	CASE ( 'advected_distance_y' )
284	READ ( 13 ) advected_distance_y
285	CASE ( 'alpha_surface' )
286	READ ( 13 ) alpha_surface
287	CASE ( 'average_count_pr' )
288	READ ( 13 ) average_count_pr
289	CASE ( 'average_count_sp' )
290	READ ( 13 ) average_count_sp
291	CASE ( 'average_count_3d' )
292	READ ( 13 ) average_count_3d
293	CASE ( 'bc_e_b' )
294	READ ( 13 ) bc_e_b
295	CASE ( 'bc_lr' )
296	READ ( 13 ) bc_lr
297	CASE ( 'bc_ns' )
298	READ ( 13 ) bc_ns
299	CASE ( 'bc_p_b' )
300	READ ( 13 ) bc_p_b
301	CASE ( 'bc_p_t' )
302	READ ( 13 ) bc_p_t
303	CASE ( 'bc_pt_b' )
304	READ ( 13 ) bc_pt_b
305	CASE ( 'bc_pt_t' )
306	READ ( 13 ) bc_pt_t
307	CASE ( 'bc_pt_t_val' )
308	READ ( 13 ) bc_pt_t_val
309	CASE ( 'bc_q_b' )
310	READ ( 13 ) bc_q_b
311	CASE ( 'bc_q_t' )
312	READ ( 13 ) bc_q_t
313	CASE ( 'bc_q_t_val' )
314	READ ( 13 ) bc_q_t_val
315	CASE ( 'bc_s_b' )
316	READ ( 13 ) bc_s_b
317	CASE ( 'bc_s_t' )
318	READ ( 13 ) bc_s_t
319	CASE ( 'bc_sa_t' )
320	READ ( 13 ) bc_sa_t
321	CASE ( 'bc_uv_b' )
322	READ ( 13 ) bc_uv_b
323	CASE ( 'bc_uv_t' )
324	READ ( 13 ) bc_uv_t
325	CASE ( 'bottom_salinityflux' )
326	READ ( 13 ) bottom_salinityflux
327	CASE ( 'building_height' )
328	READ ( 13 ) building_height
329	CASE ( 'building_length_x' )
330	READ ( 13 ) building_length_x
331	CASE ( 'building_length_y' )
332	READ ( 13 ) building_length_y
333	CASE ( 'building_wall_left' )
334	READ ( 13 ) building_wall_left
335	CASE ( 'building_wall_south' )
336	READ ( 13 ) building_wall_south
337	CASE ( 'call_psolver_at_all_substeps' )
338	READ ( 13 ) call_psolver_at_all_substeps
339	CASE ( 'canopy_mode' )
340	READ ( 13 ) canopy_mode
341	CASE ( 'canyon_height' )
342	READ ( 13 ) canyon_height
343	CASE ( 'canyon_width_x' )
344	READ ( 13 ) canyon_width_x
345	CASE ( 'canyon_width_y' )
346	READ ( 13 ) canyon_width_y
347	CASE ( 'canyon_wall_left' )
348	READ ( 13 ) canyon_wall_left
349	CASE ( 'canyon_wall_south' )
350	READ ( 13 ) canyon_wall_south
351	CASE ( 'c_sedimentation' )
352	READ ( 13 ) c_sedimentation
353	CASE ( 'cfl_factor' )
354	READ ( 13 ) cfl_factor
355	CASE ( 'cloud_droplets' )
356	READ ( 13 ) cloud_droplets
357	CASE ( 'cloud_physics' )
358	READ ( 13 ) cloud_physics
359	CASE ( 'cloud_scheme' )
360	READ ( 13 ) cloud_scheme
361	CASE ( 'collective_wait' )
362	READ ( 13 ) collective_wait
363	CASE ( 'conserve_volume_flow' )
364	READ ( 13 ) conserve_volume_flow
365	CASE ( 'conserve_volume_flow_mode' )
366	READ ( 13 ) conserve_volume_flow_mode
367	CASE ( 'coupling_start_time' )
368	READ ( 13 ) coupling_start_time
369	CASE ( 'cthf' )
370	READ ( 13 ) cthf
371	CASE ( 'current_timestep_number' )
372	READ ( 13 ) current_timestep_number
373	CASE ( 'curvature_solution_effects' )
374	READ ( 13 ) curvature_solution_effects
375	CASE ( 'cycle_mg' )
376	READ ( 13 ) cycle_mg
377	CASE ( 'damp_level_1d' )
378	READ ( 13 ) damp_level_1d
379	CASE ( 'dissipation_1d' )
380	READ ( 13 ) dissipation_1d
381	CASE ( 'dp_external' )
382	READ ( 13 ) dp_external
383	CASE ( 'dp_level_b' )
384	READ ( 13 ) dp_level_b
385	CASE ( 'dp_smooth' )
386	READ ( 13 ) dp_smooth
387	CASE ( 'dpdxy' )
388	READ ( 13 ) dpdxy
389	CASE ( 'drag_coefficient' )
390	READ ( 13 ) drag_coefficient
391	CASE ( 'drizzle' )
392	READ ( 13 ) drizzle
393	CASE ( 'dt_pr_1d' )
394	READ ( 13 ) dt_pr_1d
395	CASE ( 'dt_run_control_1d' )
396	READ ( 13 ) dt_run_control_1d
397	CASE ( 'dt_3d' )
398	READ ( 13 ) dt_3d
399	CASE ( 'dvrp_filecount' )
400	READ ( 13 ) dvrp_filecount
401	CASE ( 'dx' )
402	READ ( 13 ) dx
403	CASE ( 'dy' )
404	READ ( 13 ) dy
405	CASE ( 'dz' )
406	READ ( 13 ) dz
407	CASE ( 'dz_max' )
408	READ ( 13 ) dz_max
409	CASE ( 'dz_stretch_factor' )
410	READ ( 13 ) dz_stretch_factor
411	CASE ( 'dz_stretch_level' )
412	READ ( 13 ) dz_stretch_level
413	CASE ( 'e_min' )
414	READ ( 13 ) e_min
415	CASE ( 'end_time_1d' )
416	READ ( 13 ) end_time_1d
417	CASE ( 'fft_method' )
418	READ ( 13 ) fft_method
419	CASE ( 'first_call_lpm' )
420	READ ( 13 ) first_call_lpm
421	CASE ( 'galilei_transformation' )
422	READ ( 13 ) galilei_transformation
423	CASE ( 'hom' )
424	READ ( 13 ) hom
425	CASE ( 'hom_sum' )
426	READ ( 13 ) hom_sum
427	CASE ( 'humidity' )
428	READ ( 13 ) humidity
429	CASE ( 'inflow_damping_factor' )
430	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
431	ALLOCATE( inflow_damping_factor(0:nz+1) )
432	ENDIF
433	READ ( 13 ) inflow_damping_factor
434	CASE ( 'inflow_damping_height' )
435	READ ( 13 ) inflow_damping_height
436	CASE ( 'inflow_damping_width' )
437	READ ( 13 ) inflow_damping_width
438	CASE ( 'inflow_disturbance_begin' )
439	READ ( 13 ) inflow_disturbance_begin
440	CASE ( 'inflow_disturbance_end' )
441	READ ( 13 ) inflow_disturbance_end
442	CASE ( 'km_constant' )
443	READ ( 13 ) km_constant
444	CASE ( 'lad' )
445	READ ( 13 ) lad
446	CASE ( 'lad_surface' )
447	READ ( 13 ) lad_surface
448	CASE ( 'lad_vertical_gradient' )
449	READ ( 13 ) lad_vertical_gradient
450	CASE ( 'lad_vertical_gradient_level' )
451	READ ( 13 ) lad_vertical_gradient_level
452	CASE ( 'lad_vertical_gradient_level_in' )
453	READ ( 13 ) lad_vertical_gradient_level_ind
454	CASE ( 'large_scale_forcing' )
455	READ ( 13 ) large_scale_forcing
456	CASE ( 'large_scale_subsidence' )
457	READ ( 13 ) large_scale_subsidence
458	CASE ( 'leaf_surface_concentration' )
459	READ ( 13 ) leaf_surface_concentration
460	CASE ( 'limiter_sedimentation' )
461	READ ( 13 ) limiter_sedimentation
462	CASE ( 'loop_optimization' )
463	READ ( 13 ) loop_optimization
464	CASE ( 'masking_method' )
465	READ ( 13 ) masking_method
466	CASE ( 'mean_inflow_profiles' )
467	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
468	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
469	ENDIF
470	READ ( 13 ) mean_inflow_profiles
471	CASE ( 'mg_cycles' )
472	READ ( 13 ) mg_cycles
473	CASE ( 'mg_switch_to_pe0_level' )
474	READ ( 13 ) mg_switch_to_pe0_level
475	CASE ( 'mixing_length_1d' )
476	READ ( 13 ) mixing_length_1d
477	CASE ( 'momentum_advec' )
478	READ ( 13 ) momentum_advec
479	CASE ( 'nc_const' )
480	READ ( 13 ) nc_const
481	CASE ( 'netcdf_precision' )
482	READ ( 13 ) netcdf_precision
483	CASE ( 'neutral' )
484	READ ( 13 ) neutral
485	CASE ( 'ngsrb' )
486	READ ( 13 ) ngsrb
487	CASE ( 'nsor' )
488	READ ( 13 ) nsor
489	CASE ( 'nsor_ini' )
490	READ ( 13 ) nsor_ini
491	CASE ( 'nudging' )
492	READ ( 13 ) nudging
493	CASE ( 'nx' )
494	READ ( 13 ) nx
495	nx_on_file = nx
496	CASE ( 'ny' )
497	READ ( 13 ) ny
498	ny_on_file = ny
499	CASE ( 'ocean' )
500	READ ( 13 ) ocean
501	CASE ( 'old_dt' )
502	READ ( 13 ) old_dt
503	CASE ( 'omega' )
504	READ ( 13 ) omega
505	CASE ( 'omega_sor' )
506	READ ( 13 ) omega_sor
507	CASE ( 'output_for_t0' )
508	READ (13) output_for_t0
509	CASE ( 'passive_scalar' )
510	READ ( 13 ) passive_scalar
511	CASE ( 'pch_index' )
512	READ ( 13 ) pch_index
513	CASE ( 'phi' )
514	READ ( 13 ) phi
515	CASE ( 'plant_canopy' )
516	READ ( 13 ) plant_canopy
517	CASE ( 'prandtl_layer' )
518	READ ( 13 ) prandtl_layer
519	CASE ( 'prandtl_number' )
520	READ ( 13 ) prandtl_number
521	CASE ( 'precipitation' )
522	READ ( 13 ) precipitation
523	CASE ( 'psolver' )
524	READ ( 13 ) psolver
525	CASE ( 'pt_damping_factor' )
526	READ ( 13 ) pt_damping_factor
527	CASE ( 'pt_damping_width' )
528	READ ( 13 ) pt_damping_width
529	CASE ( 'pt_init' )
530	READ ( 13 ) pt_init
531	CASE ( 'pt_reference' )
532	READ ( 13 ) pt_reference
533	CASE ( 'pt_surface' )
534	READ ( 13 ) pt_surface
535	CASE ( 'pt_surface_initial_change' )
536	READ ( 13 ) pt_surface_initial_change
537	CASE ( 'pt_vertical_gradient' )
538	READ ( 13 ) pt_vertical_gradient
539	CASE ( 'pt_vertical_gradient_level' )
540	READ ( 13 ) pt_vertical_gradient_level
541	CASE ( 'pt_vertical_gradient_level_ind' )
542	READ ( 13 ) pt_vertical_gradient_level_ind
543	CASE ( 'q_init' )
544	READ ( 13 ) q_init
545	CASE ( 'q_surface' )
546	READ ( 13 ) q_surface
547	CASE ( 'q_surface_initial_change' )
548	READ ( 13 ) q_surface_initial_change
549	CASE ( 'q_vertical_gradient' )
550	READ ( 13 ) q_vertical_gradient
551	CASE ( 'q_vertical_gradient_level' )
552	READ ( 13 ) q_vertical_gradient_level
553	CASE ( 'q_vertical_gradient_level_ind' )
554	READ ( 13 ) q_vertical_gradient_level_ind
555	CASE ( 'radiation' )
556	READ ( 13 ) radiation
557	CASE ( 'random_generator' )
558	READ ( 13 ) random_generator
559	CASE ( 'random_heatflux' )
560	READ ( 13 ) random_heatflux
561	CASE ( 'rayleigh_damping_factor' )
562	READ ( 13 ) rayleigh_damping_factor
563	CASE ( 'rayleigh_damping_height' )
564	READ ( 13 ) rayleigh_damping_height
565	CASE ( 'recycling_width' )
566	READ ( 13 ) recycling_width
567	CASE ( 'reference_state' )
568	READ ( 13 ) reference_state
569	CASE ( 'ref_state' )
570	READ ( 13 ) ref_state
571	CASE ( 'residual_limit' )
572	READ ( 13 ) residual_limit
573	CASE ( 'rif_max' )
574	READ ( 13 ) rif_max
575	CASE ( 'rif_min' )
576	READ ( 13 ) rif_min
577	CASE ( 'roughness_length' )
578	READ ( 13 ) roughness_length
579	CASE ( 'runnr' )
580	READ ( 13 ) runnr
581	CASE ( 'run_coupled' )
582	READ ( 13 ) run_coupled
583	CASE ( 'sa_init' )
584	READ ( 13 ) sa_init
585	CASE ( 'sa_surface' )
586	READ ( 13 ) sa_surface
587	CASE ( 'sa_vertical_gradient' )
588	READ ( 13 ) sa_vertical_gradient
589	CASE ( 'sa_vertical_gradient_level' )
590	READ ( 13 ) sa_vertical_gradient_level
591	CASE ( 'scalar_advec' )
592	READ ( 13 ) scalar_advec
593	CASE ( 'scalar_exchange_coefficient' )
594	READ ( 13 ) scalar_exchange_coefficient
595	CASE ( 'simulated_time' )
596	READ ( 13 ) simulated_time
597	CASE ( 'surface_heatflux' )
598	READ ( 13 ) surface_heatflux
599	CASE ( 'surface_pressure' )
600	READ ( 13 ) surface_pressure
601	CASE ( 'surface_scalarflux' )
602	READ ( 13 ) surface_scalarflux
603	CASE ( 'surface_waterflux' )
604	READ ( 13 ) surface_waterflux
605	CASE ( 's_surface' )
606	READ ( 13 ) s_surface
607	CASE ( 's_surface_initial_change' )
608	READ ( 13 ) s_surface_initial_change
609	CASE ( 's_vertical_gradient' )
610	READ ( 13 ) s_vertical_gradient
611	CASE ( 's_vertical_gradient_level' )
612	READ ( 13 ) s_vertical_gradient_level
613	CASE ( 'time_coupling' )
614	READ ( 13 ) time_coupling
615	CASE ( 'time_disturb' )
616	READ ( 13 ) time_disturb
617	CASE ( 'time_dopr' )
618	READ ( 13 ) time_dopr
619	CASE ( 'time_domask' )
620	READ ( 13 ) time_domask
621	CASE ( 'time_dopr_av' )
622	READ ( 13 ) time_dopr_av
623	CASE ( 'time_dopr_listing' )
624	READ ( 13 ) time_dopr_listing
625	CASE ( 'time_dopts' )
626	READ ( 13 ) time_dopts
627	CASE ( 'time_dosp' )
628	READ ( 13 ) time_dosp
629	CASE ( 'time_dots' )
630	READ ( 13 ) time_dots
631	CASE ( 'time_do2d_xy' )
632	READ ( 13 ) time_do2d_xy
633	CASE ( 'time_do2d_xz' )
634	READ ( 13 ) time_do2d_xz
635	CASE ( 'time_do2d_yz' )
636	READ ( 13 ) time_do2d_yz
637	CASE ( 'time_do3d' )
638	READ ( 13 ) time_do3d
639	CASE ( 'time_do_av' )
640	READ ( 13 ) time_do_av
641	CASE ( 'time_do_sla' )
642	READ ( 13 ) time_do_sla
643	CASE ( 'time_dvrp' )
644	READ ( 13 ) time_dvrp
645	CASE ( 'time_restart' )
646	READ ( 13 ) time_restart
647	CASE ( 'time_run_control' )
648	READ ( 13 ) time_run_control
649	CASE ( 'time_since_reference_point' )
650	READ ( 13 ) time_since_reference_point
651	CASE ( 'time_sort_particles' )
652	READ ( 13 ) time_sort_particles
653	CASE ( 'timestep_scheme' )
654	READ ( 13 ) timestep_scheme
655	CASE ( 'topography' )
656	READ ( 13 ) topography
657	CASE ( 'topography_grid_convention' )
658	READ ( 13 ) topography_grid_convention
659	CASE ( 'top_heatflux' )
660	READ ( 13 ) top_heatflux
661	CASE ( 'top_momentumflux_u' )
662	READ ( 13 ) top_momentumflux_u
663	CASE ( 'top_momentumflux_v' )
664	READ ( 13 ) top_momentumflux_v
665	CASE ( 'top_salinityflux' )
666	READ ( 13 ) top_salinityflux
667	CASE ( 'tsc' )
668	READ ( 13 ) tsc
669	CASE ( 'turbulence' )
670	READ ( 13 ) turbulence
671	CASE ( 'turbulent_inflow' )
672	READ ( 13 ) turbulent_inflow
673	CASE ( 'u_bulk' )
674	READ ( 13 ) u_bulk
675	CASE ( 'u_init' )
676	READ ( 13 ) u_init
677	CASE ( 'u_max' )
678	READ ( 13 ) u_max
679	CASE ( 'u_max_ijk' )
680	READ ( 13 ) u_max_ijk
681	CASE ( 'ug' )
682	READ ( 13 ) ug
683	CASE ( 'ug_surface' )
684	READ ( 13 ) ug_surface
685	CASE ( 'ug_vertical_gradient' )
686	READ ( 13 ) ug_vertical_gradient
687	CASE ( 'ug_vertical_gradient_level' )
688	READ ( 13 ) ug_vertical_gradient_level
689	CASE ( 'ug_vertical_gradient_level_ind' )
690	READ ( 13 ) ug_vertical_gradient_level_ind
691	CASE ( 'use_surface_fluxes' )
692	READ ( 13 ) use_surface_fluxes
693	CASE ( 'use_top_fluxes' )
694	READ ( 13 ) use_top_fluxes
695	CASE ( 'use_ug_for_galilei_tr' )
696	READ ( 13 ) use_ug_for_galilei_tr
697	CASE ( 'use_upstream_for_tke' )
698	READ ( 13 ) use_upstream_for_tke
699	CASE ( 'v_bulk' )
700	READ ( 13 ) v_bulk
701	CASE ( 'v_init' )
702	READ ( 13 ) v_init
703	CASE ( 'v_max' )
704	READ ( 13 ) v_max
705	CASE ( 'v_max_ijk' )
706	READ ( 13 ) v_max_ijk
707	CASE ( 'ventilation_effect' )
708	READ ( 13 ) ventilation_effect
709	CASE ( 'vg' )
710	READ ( 13 ) vg
711	CASE ( 'vg_surface' )
712	READ ( 13 ) vg_surface
713	CASE ( 'vg_vertical_gradient' )
714	READ ( 13 ) vg_vertical_gradient
715	CASE ( 'vg_vertical_gradient_level' )
716	READ ( 13 ) vg_vertical_gradient_level
717	CASE ( 'vg_vertical_gradient_level_ind' )
718	READ ( 13 ) vg_vertical_gradient_level_ind
719	CASE ( 'volume_flow_area' )
720	READ ( 13 ) volume_flow_area
721	CASE ( 'volume_flow_initial' )
722	READ ( 13 ) volume_flow_initial
723	CASE ( 'wall_adjustment' )
724	READ ( 13 ) wall_adjustment
725	CASE ( 'subs_vertical_gradient' )
726	READ ( 13 ) subs_vertical_gradient
727	CASE ( 'subs_vertical_gradient_level' )
728	READ ( 13 ) subs_vertical_gradient_level
729	CASE ( 'subs_vertical_gradient_level_i' )
730	READ ( 13 ) subs_vertical_gradient_level_i
731	CASE ( 'w_max' )
732	READ ( 13 ) w_max
733	CASE ( 'w_max_ijk' )
734	READ ( 13 ) w_max_ijk
735	CASE ( 'z0h_factor' )
736	READ ( 13 ) z0h_factor
737
738	CASE DEFAULT
739	WRITE( message_string, * ) 'unknown variable named "', &
740	TRIM( variable_chr ), '" found in', &
741	' data from prior run on PE ', myid
742	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
743	END SELECT
744	!
745	!-- Read next string
746	READ ( 13 ) variable_chr
747
748	ENDDO
749
750
751	END SUBROUTINE read_var_list
752
753
754
755	SUBROUTINE read_parts_of_var_list
756
757	!------------------------------------------------------------------------------!
758	! Description:
759	! ------------
760	! Skipping the global control variables from restart-file (binary format)
761	! except some informations needed when reading restart data from a previous
762	! run which used a smaller total domain or/and a different domain decomposition.
763	!------------------------------------------------------------------------------!
764
765	USE arrays_3d
766	USE control_parameters
767	USE indices
768	USE pegrid
769	USE statistics
770
771	IMPLICIT NONE
772
773	CHARACTER (LEN=10) :: version_on_file
774	CHARACTER (LEN=30) :: variable_chr
775	CHARACTER (LEN=1) :: cdum
776
777	INTEGER :: max_pr_user_on_file, nz_on_file, &
778	statistic_regions_on_file, tmp_mpru, tmp_sr
779
780	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
781	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
782
783
784	CALL check_open( 13 )
785
786	WRITE (9,*) 'rpovl: after check open 13'
787	CALL local_flush( 9 )
788	READ ( 13 ) version_on_file
789
790	!
791	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
792	!-- run
793	READ ( 13 ) variable_chr
794	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
795	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
796	'run on PE ', myid
797	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
798	ENDIF
799	READ ( 13 ) numprocs_previous_run
800
801	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
802	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
803	ENDIF
804
805	READ ( 13 ) variable_chr
806	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
807	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
808	'prior run on PE ', myid
809	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
810	ENDIF
811	READ ( 13 ) hor_index_bounds_previous_run
812
813	!
814	!-- Read vertical number of gridpoints and number of different areas used
815	!-- for computing statistics. Allocate arrays depending on these values,
816	!-- which are needed for the following read instructions.
817	READ ( 13 ) variable_chr
818	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
819	message_string = 'nz not found in restart data file'
820	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
821	ENDIF
822	READ ( 13 ) nz_on_file
823	IF ( nz_on_file /= nz ) THEN
824	WRITE( message_string, * ) 'mismatch concerning number of ', &
825	'gridpoints along z', &
826	'&nz on file = "', nz_on_file, '"', &
827	'&nz from run = "', nz, '"'
828	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
829	ENDIF
830
831	READ ( 13 ) variable_chr
832	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
833	message_string = 'max_pr_user not found in restart data file'
834	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
835	ENDIF
836	READ ( 13 ) max_pr_user_on_file
837	IF ( max_pr_user_on_file /= max_pr_user ) THEN
838	WRITE( message_string, * ) 'number of user profiles on res', &
839	'tart data file differs from the current ', &
840	'run&max_pr_user on file = "', &
841	max_pr_user_on_file, '"', &
842	'&max_pr_user from run = "', &
843	max_pr_user, '"'
844	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
845	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
846	ELSE
847	tmp_mpru = max_pr_user
848	ENDIF
849
850	READ ( 13 ) variable_chr
851	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
852	message_string = 'statistic_regions not found in restart data file'
853	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
854	ENDIF
855	READ ( 13 ) statistic_regions_on_file
856	IF ( statistic_regions_on_file /= statistic_regions ) THEN
857	WRITE( message_string, * ) 'statistic regions on restart data file ',&
858	'differ from the current run', &
859	'&statistic regions on file = "', &
860	statistic_regions_on_file, '"', &
861	'&statistic regions from run = "', &
862	statistic_regions, '"', &
863	'&statistic data may be lost!'
864	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
865	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
866	ELSE
867	tmp_sr = statistic_regions
868	ENDIF
869
870
871	!
872	!-- Now read and check some control parameters and skip the rest
873	WRITE (9,*) 'wpovl: begin reading variables'
874	CALL local_flush( 9 )
875	READ ( 13 ) variable_chr
876
877	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
878
879	SELECT CASE ( TRIM( variable_chr ) )
880
881	CASE ( 'average_count_pr' )
882	READ ( 13 ) average_count_pr
883	IF ( average_count_pr /= 0 ) THEN
884	WRITE( message_string, * ) 'inflow profiles not temporally ', &
885	'averaged. &Averaging will be done now using ', &
886	average_count_pr, ' samples.'
887	CALL message( 'read_parts_of_var_list', 'PA0309', &
888	0, 1, 0, 6, 0 )
889	ENDIF
890
891	CASE ( 'hom' )
892	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
893	0:statistic_regions_on_file) )
894	READ ( 13 ) hom_on_file
895	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
896	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
897	DEALLOCATE( hom_on_file )
898
899	CASE ( 'hom_sum' )
900	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
901	0:statistic_regions_on_file) )
902	READ ( 13 ) hom_sum_on_file
903	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
904	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
905	DEALLOCATE( hom_sum_on_file )
906
907	CASE ( 'nx' )
908	READ ( 13 ) nx_on_file
909
910	CASE ( 'ny' )
911	READ ( 13 ) ny_on_file
912
913
914	CASE DEFAULT
915
916	READ ( 13 ) cdum
917
918	END SELECT
919
920	READ ( 13 ) variable_chr
921
922	ENDDO
923
924	!
925	!-- Calculate the temporal average of vertical profiles, if neccessary
926	IF ( average_count_pr /= 0 ) THEN
927	hom_sum = hom_sum / REAL( average_count_pr )
928	ENDIF
929
930
931	END SUBROUTINE read_parts_of_var_list
932
933
934
935	SUBROUTINE skip_var_list
936
937	!------------------------------------------------------------------------------!
938	! Description:
939	! ------------
940	! Skipping the global control variables from restart-file (binary format)
941	!------------------------------------------------------------------------------!
942
943	IMPLICIT NONE
944
945	CHARACTER (LEN=10) :: version_on_file
946	CHARACTER (LEN=30) :: variable_chr
947
948	CHARACTER (LEN=1) :: cdum
949
950
951	WRITE (9,*) 'skipvl #1'
952	CALL local_flush( 9 )
953	READ ( 13 ) version_on_file
954
955	WRITE (9,*) 'skipvl before variable_chr'
956	CALL local_flush( 9 )
957	READ ( 13 ) variable_chr
958	WRITE (9,*) 'skipvl after variable_chr'
959	CALL local_flush( 9 )
960
961	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
962
963	WRITE (9,*) 'skipvl chr = ', variable_chr
964	CALL local_flush( 9 )
965	READ ( 13 ) cdum
966	READ ( 13 ) variable_chr
967
968	ENDDO
969	WRITE (9,*) 'skipvl last'
970	CALL local_flush( 9 )
971
972
973	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |