Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1189

Last change on this file since 1189 was 1182, checked in by raasch, 11 years ago
last commit documented, rc-file for example run updated
Property svn:keywords set to `Id`
File size: 34.7 KB

Line
1	SUBROUTINE read_var_list
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: read_var_list.f90 1182 2013-06-14 09:07:24Z heinze $
27	!
28	! 1179 2013-06-14 05:57:58Z raasch
29	! +ref_state
30	!
31	! 1115 2013-03-26 18:16:16Z hoffmann
32	! unused variables removed
33	!
34	! 1092 2013-02-02 11:24:22Z raasch
35	! unused variables removed
36	!
37	! 1065 2012-11-22 17:42:36Z hoffmann
38	! +nc, c_sedimentation, limiter_sedimentation, turbulence
39	! -mu_constant, mu_constant_value
40	!
41	! 1053 2012-11-13 17:11:03Z hoffmann
42	! necessary expansions according to the two new prognostic equations (nr, qr)
43	! of the two-moment cloud physics scheme:
44	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
45	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
46	! +surface_waterflux_*
47	!
48	! in addition, steering parameters parameters of the two-moment cloud physics
49	! scheme:
50	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
51	!
52	! 1036 2012-10-22 13:43:42Z raasch
53	! code put under GPL (PALM 3.9)
54	!
55	! 1015 2012-09-27 09:23:24Z raasch
56	! -adjust_mixing_length
57	!
58	! 1003 2012-09-14 14:35:53Z raasch
59	! -grid_matching
60	!
61	! 1001 2012-09-13 14:08:46Z raasch
62	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
63	! overshoot_limit_, ups_limit_
64	!
65	! 978 2012-08-09 08:28:32Z fricke
66	! -km_damp_max, outflow_damping_width
67	! +pt_damping_factor, pt_damping_width
68	! +z0h_factor
69	!
70	! 940 2012-07-09 14:31:00Z raasch
71	! +neutral
72	!
73	! 927 2012-06-06 19:15:04Z raasch
74	! +masking_method
75	!
76	! 849 2012-03-15 10:35:09Z raasch
77	! first_call_advec_particles renamed first_call_lpm
78	!
79	! 824 2012-02-17 09:09:57Z raasch
80	! +curvature_solution_effects
81	!
82	! 626 2010-12-10 13:04:12Z suehring
83	! idum replaced by cdum in read_parts_of_var_list
84	!
85	! 622 2010-12-10 08:08:13Z raasch
86	! +collective_wait
87	!
88	! 600 2010-11-24 16:10:51Z raasch
89	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
90	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
91	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
92	! in routine skip_var_list (end of this file), variable ldum is replaced
93	! by cdum(LEN=1), because otherwise read errors (too few data on file)
94	! appear due to one of the additional parameters (cycle_mg) which are now
95	! stored on the restart file
96	!
97	! 591 2010-10-28 06:35:52Z helmke
98	! remove print command
99	!
100	! 587 2010-10-27 08:36:51Z helmke
101	! +time_domask
102	!
103	! 580 2010-10-05 13:59:11Z heinze
104	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
105	! ws_vertical_gradient_level to subs_vertical_gradient_level and
106	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
107	!
108	! 411 2009-12-11 14:15:58Z heinze
109	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
110	! ws_vertical_gradient_level_ind
111	!
112	! 345 2009-07-01 14:37:56Z heinze
113	! +output_for_t0
114	! dt_fixed is read into a dummy variable.
115	! Output of messages replaced by message handling routine.
116	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
117	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
118	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
119	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
120	!
121	! 216 2008-11-25 07:12:43Z raasch
122	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
123	!
124	! 173 2008-05-23 20:39:38Z raasch
125	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
126	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
127	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
128	! recycling_width, turbulent_inflow,
129	! -cross_ts_*, npex, npey,
130	! hom_sum, volume_flow_area, volume_flow_initial moved from
131	! read_3d_binary to here,
132	! routines read_parts_of_var_list and skip_var_list added at the end
133	!
134	! 138 2007-11-28 10:03:58Z letzel
135	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
136	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
137	! plant_canopy, time_sort_particles
138	!
139	! 102 2007-07-27 09:09:17Z raasch
140	! +time_coupling, top_momentumflux_u\|v
141	!
142	! 95 2007-06-02 16:48:38Z raasch
143	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
144	! sa_vertical_gradient_level, bottom/top_salinity_flux
145	!
146	! 87 2007-05-22 15:46:47Z raasch
147	! +max_pr_user (version 3.1), var_hom renamed pr_palm
148	!
149	! 75 2007-03-22 09:54:05Z raasch
150	! +loop_optimization, pt_reference, moisture renamed humidity
151	!
152	! 20 2007-02-26 00:12:32Z raasch
153	! +top_heatflux, use_top_fluxes
154	!
155	! RCS Log replace by Id keyword, revision history cleaned up
156	!
157	! Revision 1.34 2006/08/22 14:14:27 raasch
158	! +dz_max
159	!
160	! Revision 1.1 1998/03/18 20:18:48 raasch
161	! Initial revision
162	!
163	!
164	! Description:
165	! ------------
166	! Reading values of global control variables from restart-file (binary format)
167	!------------------------------------------------------------------------------!
168
169	USE arrays_3d
170	USE averaging
171	USE cloud_parameters
172	USE control_parameters
173	USE grid_variables
174	USE indices
175	USE model_1d
176	USE netcdf_control
177	USE particle_attributes
178	USE pegrid
179	USE profil_parameter
180	USE statistics
181
182	IMPLICIT NONE
183
184	CHARACTER (LEN=10) :: binary_version, version_on_file
185	CHARACTER (LEN=30) :: variable_chr
186
187
188	CALL check_open( 13 )
189
190	!
191	!-- Make version number check first
192	READ ( 13 ) version_on_file
193	binary_version = '3.9a'
194	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
195	WRITE( message_string, * ) 'version mismatch concerning control ', &
196	'variables', &
197	'&version on file = "', &
198	TRIM( version_on_file ), '"', &
199	'&version on program = "', &
200	TRIM( binary_version ), '"'
201	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
202	ENDIF
203
204	!
205	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
206	!-- run
207	READ ( 13 ) variable_chr
208	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
209	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
210	'run on PE ', myid
211	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
212	ENDIF
213	READ ( 13 ) numprocs_previous_run
214
215	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
216	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
217	ENDIF
218
219	READ ( 13 ) variable_chr
220	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
221	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
222	'prior run on PE ', myid
223	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
224	ENDIF
225	READ ( 13 ) hor_index_bounds_previous_run
226
227	!
228	!-- Read vertical number of gridpoints and number of different areas used
229	!-- for computing statistics. Allocate arrays depending on these values,
230	!-- which are needed for the following read instructions.
231	READ ( 13 ) variable_chr
232	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
233	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
234	myid
235	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
236	ENDIF
237	READ ( 13 ) nz
238
239	READ ( 13 ) variable_chr
240	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
241	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
242	'prior run on PE ', myid
243	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
244	ENDIF
245	READ ( 13 ) max_pr_user ! This value is checked against the number of
246	! user profiles given for the current run
247	! in routine user_parin (it has to match)
248
249	READ ( 13 ) variable_chr
250	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
251	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
252	'prior run on PE ', myid
253	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
254	ENDIF
255	READ ( 13 ) statistic_regions
256	IF ( .NOT. ALLOCATED( ug ) ) THEN
257	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
258	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
259	sa_init(0:nz+1), &
260	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
261	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
262	ENDIF
263
264	!
265	!-- Now read all control parameters:
266	!-- Caution: When the following read instructions have been changed, the
267	!-- ------- version number stored in the variable binary_version has to be
268	!-- increased. The same changes must also be done in write_var_list.
269	READ ( 13 ) variable_chr
270	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
271
272	SELECT CASE ( TRIM( variable_chr ) )
273
274	CASE ( 'advected_distance_x' )
275	READ ( 13 ) advected_distance_x
276	CASE ( 'advected_distance_y' )
277	READ ( 13 ) advected_distance_y
278	CASE ( 'alpha_surface' )
279	READ ( 13 ) alpha_surface
280	CASE ( 'average_count_pr' )
281	READ ( 13 ) average_count_pr
282	CASE ( 'average_count_sp' )
283	READ ( 13 ) average_count_sp
284	CASE ( 'average_count_3d' )
285	READ ( 13 ) average_count_3d
286	CASE ( 'bc_e_b' )
287	READ ( 13 ) bc_e_b
288	CASE ( 'bc_lr' )
289	READ ( 13 ) bc_lr
290	CASE ( 'bc_ns' )
291	READ ( 13 ) bc_ns
292	CASE ( 'bc_p_b' )
293	READ ( 13 ) bc_p_b
294	CASE ( 'bc_p_t' )
295	READ ( 13 ) bc_p_t
296	CASE ( 'bc_pt_b' )
297	READ ( 13 ) bc_pt_b
298	CASE ( 'bc_pt_t' )
299	READ ( 13 ) bc_pt_t
300	CASE ( 'bc_pt_t_val' )
301	READ ( 13 ) bc_pt_t_val
302	CASE ( 'bc_q_b' )
303	READ ( 13 ) bc_q_b
304	CASE ( 'bc_q_t' )
305	READ ( 13 ) bc_q_t
306	CASE ( 'bc_q_t_val' )
307	READ ( 13 ) bc_q_t_val
308	CASE ( 'bc_s_b' )
309	READ ( 13 ) bc_s_b
310	CASE ( 'bc_s_t' )
311	READ ( 13 ) bc_s_t
312	CASE ( 'bc_sa_t' )
313	READ ( 13 ) bc_sa_t
314	CASE ( 'bc_uv_b' )
315	READ ( 13 ) bc_uv_b
316	CASE ( 'bc_uv_t' )
317	READ ( 13 ) bc_uv_t
318	CASE ( 'bottom_salinityflux' )
319	READ ( 13 ) bottom_salinityflux
320	CASE ( 'building_height' )
321	READ ( 13 ) building_height
322	CASE ( 'building_length_x' )
323	READ ( 13 ) building_length_x
324	CASE ( 'building_length_y' )
325	READ ( 13 ) building_length_y
326	CASE ( 'building_wall_left' )
327	READ ( 13 ) building_wall_left
328	CASE ( 'building_wall_south' )
329	READ ( 13 ) building_wall_south
330	CASE ( 'call_psolver_at_all_substeps' )
331	READ ( 13 ) call_psolver_at_all_substeps
332	CASE ( 'canopy_mode' )
333	READ ( 13 ) canopy_mode
334	CASE ( 'canyon_height' )
335	READ ( 13 ) canyon_height
336	CASE ( 'canyon_width_x' )
337	READ ( 13 ) canyon_width_x
338	CASE ( 'canyon_width_y' )
339	READ ( 13 ) canyon_width_y
340	CASE ( 'canyon_wall_left' )
341	READ ( 13 ) canyon_wall_left
342	CASE ( 'canyon_wall_south' )
343	READ ( 13 ) canyon_wall_south
344	CASE ( 'c_sedimentation' )
345	READ ( 13 ) c_sedimentation
346	CASE ( 'cfl_factor' )
347	READ ( 13 ) cfl_factor
348	CASE ( 'cloud_droplets' )
349	READ ( 13 ) cloud_droplets
350	CASE ( 'cloud_physics' )
351	READ ( 13 ) cloud_physics
352	CASE ( 'cloud_scheme' )
353	READ ( 13 ) cloud_scheme
354	CASE ( 'collective_wait' )
355	READ ( 13 ) collective_wait
356	CASE ( 'conserve_volume_flow' )
357	READ ( 13 ) conserve_volume_flow
358	CASE ( 'conserve_volume_flow_mode' )
359	READ ( 13 ) conserve_volume_flow_mode
360	CASE ( 'coupling_start_time' )
361	READ ( 13 ) coupling_start_time
362	CASE ( 'cthf' )
363	READ ( 13 ) cthf
364	CASE ( 'current_timestep_number' )
365	READ ( 13 ) current_timestep_number
366	CASE ( 'curvature_solution_effects' )
367	READ ( 13 ) curvature_solution_effects
368	CASE ( 'cycle_mg' )
369	READ ( 13 ) cycle_mg
370	CASE ( 'damp_level_1d' )
371	READ ( 13 ) damp_level_1d
372	CASE ( 'dissipation_1d' )
373	READ ( 13 ) dissipation_1d
374	CASE ( 'dp_external' )
375	READ ( 13 ) dp_external
376	CASE ( 'dp_level_b' )
377	READ ( 13 ) dp_level_b
378	CASE ( 'dp_smooth' )
379	READ ( 13 ) dp_smooth
380	CASE ( 'dpdxy' )
381	READ ( 13 ) dpdxy
382	CASE ( 'drag_coefficient' )
383	READ ( 13 ) drag_coefficient
384	CASE ( 'drizzle' )
385	READ ( 13 ) drizzle
386	CASE ( 'dt_pr_1d' )
387	READ ( 13 ) dt_pr_1d
388	CASE ( 'dt_run_control_1d' )
389	READ ( 13 ) dt_run_control_1d
390	CASE ( 'dt_3d' )
391	READ ( 13 ) dt_3d
392	CASE ( 'dvrp_filecount' )
393	READ ( 13 ) dvrp_filecount
394	CASE ( 'dx' )
395	READ ( 13 ) dx
396	CASE ( 'dy' )
397	READ ( 13 ) dy
398	CASE ( 'dz' )
399	READ ( 13 ) dz
400	CASE ( 'dz_max' )
401	READ ( 13 ) dz_max
402	CASE ( 'dz_stretch_factor' )
403	READ ( 13 ) dz_stretch_factor
404	CASE ( 'dz_stretch_level' )
405	READ ( 13 ) dz_stretch_level
406	CASE ( 'e_min' )
407	READ ( 13 ) e_min
408	CASE ( 'end_time_1d' )
409	READ ( 13 ) end_time_1d
410	CASE ( 'fft_method' )
411	READ ( 13 ) fft_method
412	CASE ( 'first_call_lpm' )
413	READ ( 13 ) first_call_lpm
414	CASE ( 'galilei_transformation' )
415	READ ( 13 ) galilei_transformation
416	CASE ( 'hom' )
417	READ ( 13 ) hom
418	CASE ( 'hom_sum' )
419	READ ( 13 ) hom_sum
420	CASE ( 'humidity' )
421	READ ( 13 ) humidity
422	CASE ( 'inflow_damping_factor' )
423	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
424	ALLOCATE( inflow_damping_factor(0:nz+1) )
425	ENDIF
426	READ ( 13 ) inflow_damping_factor
427	CASE ( 'inflow_damping_height' )
428	READ ( 13 ) inflow_damping_height
429	CASE ( 'inflow_damping_width' )
430	READ ( 13 ) inflow_damping_width
431	CASE ( 'inflow_disturbance_begin' )
432	READ ( 13 ) inflow_disturbance_begin
433	CASE ( 'inflow_disturbance_end' )
434	READ ( 13 ) inflow_disturbance_end
435	CASE ( 'km_constant' )
436	READ ( 13 ) km_constant
437	CASE ( 'lad' )
438	READ ( 13 ) lad
439	CASE ( 'lad_surface' )
440	READ ( 13 ) lad_surface
441	CASE ( 'lad_vertical_gradient' )
442	READ ( 13 ) lad_vertical_gradient
443	CASE ( 'lad_vertical_gradient_level' )
444	READ ( 13 ) lad_vertical_gradient_level
445	CASE ( 'lad_vertical_gradient_level_in' )
446	READ ( 13 ) lad_vertical_gradient_level_ind
447	CASE ( 'large_scale_subsidence' )
448	READ ( 13 ) large_scale_subsidence
449	CASE ( 'leaf_surface_concentration' )
450	READ ( 13 ) leaf_surface_concentration
451	CASE ( 'limiter_sedimentation' )
452	READ ( 13 ) limiter_sedimentation
453	CASE ( 'loop_optimization' )
454	READ ( 13 ) loop_optimization
455	CASE ( 'masking_method' )
456	READ ( 13 ) masking_method
457	CASE ( 'mean_inflow_profiles' )
458	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
459	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
460	ENDIF
461	READ ( 13 ) mean_inflow_profiles
462	CASE ( 'mg_cycles' )
463	READ ( 13 ) mg_cycles
464	CASE ( 'mg_switch_to_pe0_level' )
465	READ ( 13 ) mg_switch_to_pe0_level
466	CASE ( 'mixing_length_1d' )
467	READ ( 13 ) mixing_length_1d
468	CASE ( 'momentum_advec' )
469	READ ( 13 ) momentum_advec
470	CASE ( 'nc_const' )
471	READ ( 13 ) nc_const
472	CASE ( 'netcdf_precision' )
473	READ ( 13 ) netcdf_precision
474	CASE ( 'neutral' )
475	READ ( 13 ) neutral
476	CASE ( 'ngsrb' )
477	READ ( 13 ) ngsrb
478	CASE ( 'nsor' )
479	READ ( 13 ) nsor
480	CASE ( 'nsor_ini' )
481	READ ( 13 ) nsor_ini
482	CASE ( 'nx' )
483	READ ( 13 ) nx
484	nx_on_file = nx
485	CASE ( 'ny' )
486	READ ( 13 ) ny
487	ny_on_file = ny
488	CASE ( 'ocean' )
489	READ ( 13 ) ocean
490	CASE ( 'old_dt' )
491	READ ( 13 ) old_dt
492	CASE ( 'omega' )
493	READ ( 13 ) omega
494	CASE ( 'omega_sor' )
495	READ ( 13 ) omega_sor
496	CASE ( 'output_for_t0' )
497	READ (13) output_for_t0
498	CASE ( 'passive_scalar' )
499	READ ( 13 ) passive_scalar
500	CASE ( 'pch_index' )
501	READ ( 13 ) pch_index
502	CASE ( 'phi' )
503	READ ( 13 ) phi
504	CASE ( 'plant_canopy' )
505	READ ( 13 ) plant_canopy
506	CASE ( 'prandtl_layer' )
507	READ ( 13 ) prandtl_layer
508	CASE ( 'prandtl_number' )
509	READ ( 13 ) prandtl_number
510	CASE ( 'precipitation' )
511	READ ( 13 ) precipitation
512	CASE ( 'psolver' )
513	READ ( 13 ) psolver
514	CASE ( 'pt_damping_factor' )
515	READ ( 13 ) pt_damping_factor
516	CASE ( 'pt_damping_width' )
517	READ ( 13 ) pt_damping_width
518	CASE ( 'pt_init' )
519	READ ( 13 ) pt_init
520	CASE ( 'pt_reference' )
521	READ ( 13 ) pt_reference
522	CASE ( 'pt_surface' )
523	READ ( 13 ) pt_surface
524	CASE ( 'pt_surface_initial_change' )
525	READ ( 13 ) pt_surface_initial_change
526	CASE ( 'pt_vertical_gradient' )
527	READ ( 13 ) pt_vertical_gradient
528	CASE ( 'pt_vertical_gradient_level' )
529	READ ( 13 ) pt_vertical_gradient_level
530	CASE ( 'pt_vertical_gradient_level_ind' )
531	READ ( 13 ) pt_vertical_gradient_level_ind
532	CASE ( 'q_init' )
533	READ ( 13 ) q_init
534	CASE ( 'q_surface' )
535	READ ( 13 ) q_surface
536	CASE ( 'q_surface_initial_change' )
537	READ ( 13 ) q_surface_initial_change
538	CASE ( 'q_vertical_gradient' )
539	READ ( 13 ) q_vertical_gradient
540	CASE ( 'q_vertical_gradient_level' )
541	READ ( 13 ) q_vertical_gradient_level
542	CASE ( 'q_vertical_gradient_level_ind' )
543	READ ( 13 ) q_vertical_gradient_level_ind
544	CASE ( 'radiation' )
545	READ ( 13 ) radiation
546	CASE ( 'random_generator' )
547	READ ( 13 ) random_generator
548	CASE ( 'random_heatflux' )
549	READ ( 13 ) random_heatflux
550	CASE ( 'rayleigh_damping_factor' )
551	READ ( 13 ) rayleigh_damping_factor
552	CASE ( 'rayleigh_damping_height' )
553	READ ( 13 ) rayleigh_damping_height
554	CASE ( 'recycling_width' )
555	READ ( 13 ) recycling_width
556	CASE ( 'reference_state' )
557	READ ( 13 ) reference_state
558	CASE ( 'ref_state' )
559	READ ( 13 ) ref_state
560	CASE ( 'residual_limit' )
561	READ ( 13 ) residual_limit
562	CASE ( 'rif_max' )
563	READ ( 13 ) rif_max
564	CASE ( 'rif_min' )
565	READ ( 13 ) rif_min
566	CASE ( 'roughness_length' )
567	READ ( 13 ) roughness_length
568	CASE ( 'runnr' )
569	READ ( 13 ) runnr
570	CASE ( 'run_coupled' )
571	READ ( 13 ) run_coupled
572	CASE ( 'sa_init' )
573	READ ( 13 ) sa_init
574	CASE ( 'sa_surface' )
575	READ ( 13 ) sa_surface
576	CASE ( 'sa_vertical_gradient' )
577	READ ( 13 ) sa_vertical_gradient
578	CASE ( 'sa_vertical_gradient_level' )
579	READ ( 13 ) sa_vertical_gradient_level
580	CASE ( 'scalar_advec' )
581	READ ( 13 ) scalar_advec
582	CASE ( 'scalar_exchange_coefficient' )
583	READ ( 13 ) scalar_exchange_coefficient
584	CASE ( 'simulated_time' )
585	READ ( 13 ) simulated_time
586	CASE ( 'surface_heatflux' )
587	READ ( 13 ) surface_heatflux
588	CASE ( 'surface_pressure' )
589	READ ( 13 ) surface_pressure
590	CASE ( 'surface_scalarflux' )
591	READ ( 13 ) surface_scalarflux
592	CASE ( 'surface_waterflux' )
593	READ ( 13 ) surface_waterflux
594	CASE ( 's_surface' )
595	READ ( 13 ) s_surface
596	CASE ( 's_surface_initial_change' )
597	READ ( 13 ) s_surface_initial_change
598	CASE ( 's_vertical_gradient' )
599	READ ( 13 ) s_vertical_gradient
600	CASE ( 's_vertical_gradient_level' )
601	READ ( 13 ) s_vertical_gradient_level
602	CASE ( 'time_coupling' )
603	READ ( 13 ) time_coupling
604	CASE ( 'time_disturb' )
605	READ ( 13 ) time_disturb
606	CASE ( 'time_dopr' )
607	READ ( 13 ) time_dopr
608	CASE ( 'time_domask' )
609	READ ( 13 ) time_domask
610	CASE ( 'time_dopr_av' )
611	READ ( 13 ) time_dopr_av
612	CASE ( 'time_dopr_listing' )
613	READ ( 13 ) time_dopr_listing
614	CASE ( 'time_dopts' )
615	READ ( 13 ) time_dopts
616	CASE ( 'time_dosp' )
617	READ ( 13 ) time_dosp
618	CASE ( 'time_dots' )
619	READ ( 13 ) time_dots
620	CASE ( 'time_do2d_xy' )
621	READ ( 13 ) time_do2d_xy
622	CASE ( 'time_do2d_xz' )
623	READ ( 13 ) time_do2d_xz
624	CASE ( 'time_do2d_yz' )
625	READ ( 13 ) time_do2d_yz
626	CASE ( 'time_do3d' )
627	READ ( 13 ) time_do3d
628	CASE ( 'time_do_av' )
629	READ ( 13 ) time_do_av
630	CASE ( 'time_do_sla' )
631	READ ( 13 ) time_do_sla
632	CASE ( 'time_dvrp' )
633	READ ( 13 ) time_dvrp
634	CASE ( 'time_restart' )
635	READ ( 13 ) time_restart
636	CASE ( 'time_run_control' )
637	READ ( 13 ) time_run_control
638	CASE ( 'time_since_reference_point' )
639	READ ( 13 ) time_since_reference_point
640	CASE ( 'time_sort_particles' )
641	READ ( 13 ) time_sort_particles
642	CASE ( 'timestep_scheme' )
643	READ ( 13 ) timestep_scheme
644	CASE ( 'topography' )
645	READ ( 13 ) topography
646	CASE ( 'topography_grid_convention' )
647	READ ( 13 ) topography_grid_convention
648	CASE ( 'top_heatflux' )
649	READ ( 13 ) top_heatflux
650	CASE ( 'top_momentumflux_u' )
651	READ ( 13 ) top_momentumflux_u
652	CASE ( 'top_momentumflux_v' )
653	READ ( 13 ) top_momentumflux_v
654	CASE ( 'top_salinityflux' )
655	READ ( 13 ) top_salinityflux
656	CASE ( 'tsc' )
657	READ ( 13 ) tsc
658	CASE ( 'turbulence' )
659	READ ( 13 ) turbulence
660	CASE ( 'turbulent_inflow' )
661	READ ( 13 ) turbulent_inflow
662	CASE ( 'u_bulk' )
663	READ ( 13 ) u_bulk
664	CASE ( 'u_init' )
665	READ ( 13 ) u_init
666	CASE ( 'u_max' )
667	READ ( 13 ) u_max
668	CASE ( 'u_max_ijk' )
669	READ ( 13 ) u_max_ijk
670	CASE ( 'ug' )
671	READ ( 13 ) ug
672	CASE ( 'ug_surface' )
673	READ ( 13 ) ug_surface
674	CASE ( 'ug_vertical_gradient' )
675	READ ( 13 ) ug_vertical_gradient
676	CASE ( 'ug_vertical_gradient_level' )
677	READ ( 13 ) ug_vertical_gradient_level
678	CASE ( 'ug_vertical_gradient_level_ind' )
679	READ ( 13 ) ug_vertical_gradient_level_ind
680	CASE ( 'use_surface_fluxes' )
681	READ ( 13 ) use_surface_fluxes
682	CASE ( 'use_top_fluxes' )
683	READ ( 13 ) use_top_fluxes
684	CASE ( 'use_ug_for_galilei_tr' )
685	READ ( 13 ) use_ug_for_galilei_tr
686	CASE ( 'use_upstream_for_tke' )
687	READ ( 13 ) use_upstream_for_tke
688	CASE ( 'v_bulk' )
689	READ ( 13 ) v_bulk
690	CASE ( 'v_init' )
691	READ ( 13 ) v_init
692	CASE ( 'v_max' )
693	READ ( 13 ) v_max
694	CASE ( 'v_max_ijk' )
695	READ ( 13 ) v_max_ijk
696	CASE ( 'ventilation_effect' )
697	READ ( 13 ) ventilation_effect
698	CASE ( 'vg' )
699	READ ( 13 ) vg
700	CASE ( 'vg_surface' )
701	READ ( 13 ) vg_surface
702	CASE ( 'vg_vertical_gradient' )
703	READ ( 13 ) vg_vertical_gradient
704	CASE ( 'vg_vertical_gradient_level' )
705	READ ( 13 ) vg_vertical_gradient_level
706	CASE ( 'vg_vertical_gradient_level_ind' )
707	READ ( 13 ) vg_vertical_gradient_level_ind
708	CASE ( 'volume_flow_area' )
709	READ ( 13 ) volume_flow_area
710	CASE ( 'volume_flow_initial' )
711	READ ( 13 ) volume_flow_initial
712	CASE ( 'wall_adjustment' )
713	READ ( 13 ) wall_adjustment
714	CASE ( 'subs_vertical_gradient' )
715	READ ( 13 ) subs_vertical_gradient
716	CASE ( 'subs_vertical_gradient_level' )
717	READ ( 13 ) subs_vertical_gradient_level
718	CASE ( 'subs_vertical_gradient_level_i' )
719	READ ( 13 ) subs_vertical_gradient_level_i
720	CASE ( 'w_max' )
721	READ ( 13 ) w_max
722	CASE ( 'w_max_ijk' )
723	READ ( 13 ) w_max_ijk
724	CASE ( 'z0h_factor' )
725	READ ( 13 ) z0h_factor
726
727	CASE DEFAULT
728	WRITE( message_string, * ) 'unknown variable named "', &
729	TRIM( variable_chr ), '" found in', &
730	' data from prior run on PE ', myid
731	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
732	END SELECT
733	!
734	!-- Read next string
735	READ ( 13 ) variable_chr
736
737	ENDDO
738
739
740	END SUBROUTINE read_var_list
741
742
743
744	SUBROUTINE read_parts_of_var_list
745
746	!------------------------------------------------------------------------------!
747	! Description:
748	! ------------
749	! Skipping the global control variables from restart-file (binary format)
750	! except some informations needed when reading restart data from a previous
751	! run which used a smaller total domain or/and a different domain decomposition.
752	!------------------------------------------------------------------------------!
753
754	USE arrays_3d
755	USE control_parameters
756	USE indices
757	USE pegrid
758	USE statistics
759
760	IMPLICIT NONE
761
762	CHARACTER (LEN=10) :: version_on_file
763	CHARACTER (LEN=30) :: variable_chr
764	CHARACTER (LEN=1) :: cdum
765
766	INTEGER :: max_pr_user_on_file, nz_on_file, &
767	statistic_regions_on_file, tmp_mpru, tmp_sr
768
769	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
770	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
771
772
773	CALL check_open( 13 )
774
775	WRITE (9,*) 'rpovl: after check open 13'
776	CALL local_flush( 9 )
777	READ ( 13 ) version_on_file
778
779	!
780	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
781	!-- run
782	READ ( 13 ) variable_chr
783	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
784	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
785	'run on PE ', myid
786	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
787	ENDIF
788	READ ( 13 ) numprocs_previous_run
789
790	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
791	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
792	ENDIF
793
794	READ ( 13 ) variable_chr
795	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
796	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
797	'prior run on PE ', myid
798	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
799	ENDIF
800	READ ( 13 ) hor_index_bounds_previous_run
801
802	!
803	!-- Read vertical number of gridpoints and number of different areas used
804	!-- for computing statistics. Allocate arrays depending on these values,
805	!-- which are needed for the following read instructions.
806	READ ( 13 ) variable_chr
807	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
808	message_string = 'nz not found in restart data file'
809	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
810	ENDIF
811	READ ( 13 ) nz_on_file
812	IF ( nz_on_file /= nz ) THEN
813	WRITE( message_string, * ) 'mismatch concerning number of ', &
814	'gridpoints along z', &
815	'&nz on file = "', nz_on_file, '"', &
816	'&nz from run = "', nz, '"'
817	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
818	ENDIF
819
820	READ ( 13 ) variable_chr
821	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
822	message_string = 'max_pr_user not found in restart data file'
823	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
824	ENDIF
825	READ ( 13 ) max_pr_user_on_file
826	IF ( max_pr_user_on_file /= max_pr_user ) THEN
827	WRITE( message_string, * ) 'number of user profiles on res', &
828	'tart data file differs from the current ', &
829	'run&max_pr_user on file = "', &
830	max_pr_user_on_file, '"', &
831	'&max_pr_user from run = "', &
832	max_pr_user, '"'
833	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
834	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
835	ELSE
836	tmp_mpru = max_pr_user
837	ENDIF
838
839	READ ( 13 ) variable_chr
840	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
841	message_string = 'statistic_regions not found in restart data file'
842	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
843	ENDIF
844	READ ( 13 ) statistic_regions_on_file
845	IF ( statistic_regions_on_file /= statistic_regions ) THEN
846	WRITE( message_string, * ) 'statistic regions on restart data file ',&
847	'differ from the current run', &
848	'&statistic regions on file = "', &
849	statistic_regions_on_file, '"', &
850	'&statistic regions from run = "', &
851	statistic_regions, '"', &
852	'&statistic data may be lost!'
853	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
854	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
855	ELSE
856	tmp_sr = statistic_regions
857	ENDIF
858
859
860	!
861	!-- Now read and check some control parameters and skip the rest
862	WRITE (9,*) 'wpovl: begin reading variables'
863	CALL local_flush( 9 )
864	READ ( 13 ) variable_chr
865
866	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
867
868	SELECT CASE ( TRIM( variable_chr ) )
869
870	CASE ( 'average_count_pr' )
871	READ ( 13 ) average_count_pr
872	IF ( average_count_pr /= 0 ) THEN
873	WRITE( message_string, * ) 'inflow profiles not temporally ', &
874	'averaged. &Averaging will be done now using ', &
875	average_count_pr, ' samples.'
876	CALL message( 'read_parts_of_var_list', 'PA0309', &
877	0, 1, 0, 6, 0 )
878	ENDIF
879
880	CASE ( 'hom' )
881	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
882	0:statistic_regions_on_file) )
883	READ ( 13 ) hom_on_file
884	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
885	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
886	DEALLOCATE( hom_on_file )
887
888	CASE ( 'hom_sum' )
889	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
890	0:statistic_regions_on_file) )
891	READ ( 13 ) hom_sum_on_file
892	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
893	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
894	DEALLOCATE( hom_sum_on_file )
895
896	CASE ( 'nx' )
897	READ ( 13 ) nx_on_file
898
899	CASE ( 'ny' )
900	READ ( 13 ) ny_on_file
901
902
903	CASE DEFAULT
904
905	READ ( 13 ) cdum
906
907	END SELECT
908
909	READ ( 13 ) variable_chr
910
911	ENDDO
912
913	!
914	!-- Calculate the temporal average of vertical profiles, if neccessary
915	IF ( average_count_pr /= 0 ) THEN
916	hom_sum = hom_sum / REAL( average_count_pr )
917	ENDIF
918
919
920	END SUBROUTINE read_parts_of_var_list
921
922
923
924	SUBROUTINE skip_var_list
925
926	!------------------------------------------------------------------------------!
927	! Description:
928	! ------------
929	! Skipping the global control variables from restart-file (binary format)
930	!------------------------------------------------------------------------------!
931
932	IMPLICIT NONE
933
934	CHARACTER (LEN=10) :: version_on_file
935	CHARACTER (LEN=30) :: variable_chr
936
937	CHARACTER (LEN=1) :: cdum
938
939
940	WRITE (9,*) 'skipvl #1'
941	CALL local_flush( 9 )
942	READ ( 13 ) version_on_file
943
944	WRITE (9,*) 'skipvl before variable_chr'
945	CALL local_flush( 9 )
946	READ ( 13 ) variable_chr
947	WRITE (9,*) 'skipvl after variable_chr'
948	CALL local_flush( 9 )
949
950	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
951
952	WRITE (9,*) 'skipvl chr = ', variable_chr
953	CALL local_flush( 9 )
954	READ ( 13 ) cdum
955	READ ( 13 ) variable_chr
956
957	ENDDO
958	WRITE (9,*) 'skipvl last'
959	CALL local_flush( 9 )
960
961
962	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |