Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 988

Last change on this file since 988 was 979, checked in by fricke, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.7 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 979 2012-08-09 08:50:11Z heinze $
11	!
12	! 978 2012-08-09 08:28:32Z fricke
13	! -km_damp_max, outflow_damping_width
14	! +pt_damping_factor, pt_damping_width
15	! +z0h_factor
16	!
17	! 940 2012-07-09 14:31:00Z raasch
18	! +neutral
19	!
20	! 927 2012-06-06 19:15:04Z raasch
21	! +masking_method
22	!
23	! 849 2012-03-15 10:35:09Z raasch
24	! first_call_advec_particles renamed first_call_lpm
25	!
26	! 824 2012-02-17 09:09:57Z raasch
27	! +curvature_solution_effects
28	!
29	! 626 2010-12-10 13:04:12Z suehring
30	! idum replaced by cdum in read_parts_of_var_list
31	!
32	! 622 2010-12-10 08:08:13Z raasch
33	! +collective_wait
34	!
35	! 600 2010-11-24 16:10:51Z raasch
36	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
37	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
38	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
39	! in routine skip_var_list (end of this file), variable ldum is replaced
40	! by cdum(LEN=1), because otherwise read errors (too few data on file)
41	! appear due to one of the additional parameters (cycle_mg) which are now
42	! stored on the restart file
43	!
44	! 591 2010-10-28 06:35:52Z helmke
45	! remove print command
46	!
47	! 587 2010-10-27 08:36:51Z helmke
48	! +time_domask
49	!
50	! 580 2010-10-05 13:59:11Z heinze
51	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
52	! ws_vertical_gradient_level to subs_vertical_gradient_level and
53	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
54	!
55	! 411 2009-12-11 14:15:58Z heinze
56	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
57	! ws_vertical_gradient_level_ind
58	!
59	! 345 2009-07-01 14:37:56Z heinze
60	! +output_for_t0
61	! dt_fixed is read into a dummy variable.
62	! Output of messages replaced by message handling routine.
63	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
64	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
65	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
66	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
67	!
68	! 216 2008-11-25 07:12:43Z raasch
69	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
70	!
71	! 173 2008-05-23 20:39:38Z raasch
72	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
73	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
74	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
75	! recycling_width, turbulent_inflow,
76	! -cross_ts_*, npex, npey,
77	! hom_sum, volume_flow_area, volume_flow_initial moved from
78	! read_3d_binary to here,
79	! routines read_parts_of_var_list and skip_var_list added at the end
80	!
81	! 138 2007-11-28 10:03:58Z letzel
82	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
83	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
84	! plant_canopy, time_sort_particles
85	!
86	! 102 2007-07-27 09:09:17Z raasch
87	! +time_coupling, top_momentumflux_u\|v
88	!
89	! 95 2007-06-02 16:48:38Z raasch
90	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
91	! sa_vertical_gradient_level, bottom/top_salinity_flux
92	!
93	! 87 2007-05-22 15:46:47Z raasch
94	! +max_pr_user (version 3.1), var_hom renamed pr_palm
95	!
96	! 75 2007-03-22 09:54:05Z raasch
97	! +loop_optimization, pt_reference, moisture renamed humidity
98	!
99	! 20 2007-02-26 00:12:32Z raasch
100	! +top_heatflux, use_top_fluxes
101	!
102	! RCS Log replace by Id keyword, revision history cleaned up
103	!
104	! Revision 1.34 2006/08/22 14:14:27 raasch
105	! +dz_max
106	!
107	! Revision 1.1 1998/03/18 20:18:48 raasch
108	! Initial revision
109	!
110	!
111	! Description:
112	! ------------
113	! Reading values of global control variables from restart-file (binary format)
114	!------------------------------------------------------------------------------!
115
116	USE arrays_3d
117	USE averaging
118	USE cloud_parameters
119	USE control_parameters
120	USE grid_variables
121	USE indices
122	USE model_1d
123	USE netcdf_control
124	USE particle_attributes
125	USE pegrid
126	USE profil_parameter
127	USE statistics
128
129	IMPLICIT NONE
130
131	CHARACTER (LEN=10) :: binary_version, version_on_file
132	CHARACTER (LEN=30) :: variable_chr
133
134	LOGICAL :: ldum
135
136
137	CALL check_open( 13 )
138
139	!
140	!-- Make version number check first
141	READ ( 13 ) version_on_file
142	binary_version = '3.5'
143	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
144	WRITE( message_string, * ) 'version mismatch concerning control ', &
145	'variables', &
146	'&version on file = "', &
147	TRIM( version_on_file ), '"', &
148	'&version on program = "', &
149	TRIM( binary_version ), '"'
150	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
151	ENDIF
152
153	!
154	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
155	!-- run
156	READ ( 13 ) variable_chr
157	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
158	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
159	'run on PE ', myid
160	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
161	ENDIF
162	READ ( 13 ) numprocs_previous_run
163
164	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
165	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
166	ENDIF
167
168	READ ( 13 ) variable_chr
169	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
170	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
171	'prior run on PE ', myid
172	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
173	ENDIF
174	READ ( 13 ) hor_index_bounds_previous_run
175
176	!
177	!-- Read vertical number of gridpoints and number of different areas used
178	!-- for computing statistics. Allocate arrays depending on these values,
179	!-- which are needed for the following read instructions.
180	READ ( 13 ) variable_chr
181	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
182	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
183	myid
184	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
185	ENDIF
186	READ ( 13 ) nz
187
188	READ ( 13 ) variable_chr
189	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
190	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
191	'prior run on PE ', myid
192	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
193	ENDIF
194	READ ( 13 ) max_pr_user ! This value is checked against the number of
195	! user profiles given for the current run
196	! in routine user_parin (it has to match)
197
198	READ ( 13 ) variable_chr
199	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
200	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
201	'prior run on PE ', myid
202	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
203	ENDIF
204	READ ( 13 ) statistic_regions
205	IF ( .NOT. ALLOCATED( ug ) ) THEN
206	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
207	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
208	sa_init(0:nz+1), &
209	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
210	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
211	ENDIF
212
213	!
214	!-- Now read all control parameters:
215	!-- Caution: When the following read instructions have been changed, the
216	!-- ------- version number stored in the variable binary_version has to be
217	!-- increased. The same changes must also be done in write_var_list.
218	READ ( 13 ) variable_chr
219	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
220
221	SELECT CASE ( TRIM( variable_chr ) )
222
223	CASE ( 'adjust_mixing_length' )
224	READ ( 13 ) adjust_mixing_length
225	CASE ( 'advected_distance_x' )
226	READ ( 13 ) advected_distance_x
227	CASE ( 'advected_distance_y' )
228	READ ( 13 ) advected_distance_y
229	CASE ( 'alpha_surface' )
230	READ ( 13 ) alpha_surface
231	CASE ( 'average_count_pr' )
232	READ ( 13 ) average_count_pr
233	CASE ( 'average_count_sp' )
234	READ ( 13 ) average_count_sp
235	CASE ( 'average_count_3d' )
236	READ ( 13 ) average_count_3d
237	CASE ( 'bc_e_b' )
238	READ ( 13 ) bc_e_b
239	CASE ( 'bc_lr' )
240	READ ( 13 ) bc_lr
241	CASE ( 'bc_ns' )
242	READ ( 13 ) bc_ns
243	CASE ( 'bc_p_b' )
244	READ ( 13 ) bc_p_b
245	CASE ( 'bc_p_t' )
246	READ ( 13 ) bc_p_t
247	CASE ( 'bc_pt_b' )
248	READ ( 13 ) bc_pt_b
249	CASE ( 'bc_pt_t' )
250	READ ( 13 ) bc_pt_t
251	CASE ( 'bc_pt_t_val' )
252	READ ( 13 ) bc_pt_t_val
253	CASE ( 'bc_q_b' )
254	READ ( 13 ) bc_q_b
255	CASE ( 'bc_q_t' )
256	READ ( 13 ) bc_q_t
257	CASE ( 'bc_q_t_val' )
258	READ ( 13 ) bc_q_t_val
259	CASE ( 'bc_s_b' )
260	READ ( 13 ) bc_s_b
261	CASE ( 'bc_s_t' )
262	READ ( 13 ) bc_s_t
263	CASE ( 'bc_sa_t' )
264	READ ( 13 ) bc_sa_t
265	CASE ( 'bc_uv_b' )
266	READ ( 13 ) bc_uv_b
267	CASE ( 'bc_uv_t' )
268	READ ( 13 ) bc_uv_t
269	CASE ( 'bottom_salinityflux' )
270	READ ( 13 ) bottom_salinityflux
271	CASE ( 'building_height' )
272	READ ( 13 ) building_height
273	CASE ( 'building_length_x' )
274	READ ( 13 ) building_length_x
275	CASE ( 'building_length_y' )
276	READ ( 13 ) building_length_y
277	CASE ( 'building_wall_left' )
278	READ ( 13 ) building_wall_left
279	CASE ( 'building_wall_south' )
280	READ ( 13 ) building_wall_south
281	CASE ( 'call_psolver_at_all_substeps' )
282	READ ( 13 ) call_psolver_at_all_substeps
283	CASE ( 'canopy_mode' )
284	READ ( 13 ) canopy_mode
285	CASE ( 'canyon_height' )
286	READ ( 13 ) canyon_height
287	CASE ( 'canyon_width_x' )
288	READ ( 13 ) canyon_width_x
289	CASE ( 'canyon_width_y' )
290	READ ( 13 ) canyon_width_y
291	CASE ( 'canyon_wall_left' )
292	READ ( 13 ) canyon_wall_left
293	CASE ( 'canyon_wall_south' )
294	READ ( 13 ) canyon_wall_south
295	CASE ( 'cfl_factor' )
296	READ ( 13 ) cfl_factor
297	CASE ( 'cloud_droplets' )
298	READ ( 13 ) cloud_droplets
299	CASE ( 'cloud_physics' )
300	READ ( 13 ) cloud_physics
301	CASE ( 'collective_wait' )
302	READ ( 13 ) collective_wait
303	CASE ( 'conserve_volume_flow' )
304	READ ( 13 ) conserve_volume_flow
305	CASE ( 'conserve_volume_flow_mode' )
306	READ ( 13 ) conserve_volume_flow_mode
307	CASE ( 'coupling_start_time' )
308	READ ( 13 ) coupling_start_time
309	CASE ( 'cthf' )
310	READ ( 13 ) cthf
311	CASE ( 'current_timestep_number' )
312	READ ( 13 ) current_timestep_number
313	CASE ( 'curvature_solution_effects' )
314	READ ( 13 ) curvature_solution_effects
315	CASE ( 'cut_spline_overshoot' )
316	READ ( 13 ) cut_spline_overshoot
317	CASE ( 'cycle_mg' )
318	READ ( 13 ) cycle_mg
319	CASE ( 'damp_level_1d' )
320	READ ( 13 ) damp_level_1d
321	CASE ( 'dissipation_1d' )
322	READ ( 13 ) dissipation_1d
323	CASE ( 'dp_external' )
324	READ ( 13 ) dp_external
325	CASE ( 'dp_level_b' )
326	READ ( 13 ) dp_level_b
327	CASE ( 'dp_smooth' )
328	READ ( 13 ) dp_smooth
329	CASE ( 'dpdxy' )
330	READ ( 13 ) dpdxy
331	CASE ( 'drag_coefficient' )
332	READ ( 13 ) drag_coefficient
333	CASE ( 'dt_fixed' )
334	READ ( 13 ) ldum ! restart files created before rev 333
335	! contained dt_fixed by mistake; it is still
336	! read here in order to allow usage of these
337	! older restart files; can be removed in a
338	! later version
339	CASE ( 'dt_pr_1d' )
340	READ ( 13 ) dt_pr_1d
341	CASE ( 'dt_run_control_1d' )
342	READ ( 13 ) dt_run_control_1d
343	CASE ( 'dt_3d' )
344	READ ( 13 ) dt_3d
345	CASE ( 'dvrp_filecount' )
346	READ ( 13 ) dvrp_filecount
347	CASE ( 'dx' )
348	READ ( 13 ) dx
349	CASE ( 'dy' )
350	READ ( 13 ) dy
351	CASE ( 'dz' )
352	READ ( 13 ) dz
353	CASE ( 'dz_max' )
354	READ ( 13 ) dz_max
355	CASE ( 'dz_stretch_factor' )
356	READ ( 13 ) dz_stretch_factor
357	CASE ( 'dz_stretch_level' )
358	READ ( 13 ) dz_stretch_level
359	CASE ( 'e_min' )
360	READ ( 13 ) e_min
361	CASE ( 'end_time_1d' )
362	READ ( 13 ) end_time_1d
363	CASE ( 'fft_method' )
364	READ ( 13 ) fft_method
365	CASE ( 'first_call_lpm' )
366	READ ( 13 ) first_call_lpm
367	CASE ( 'galilei_transformation' )
368	READ ( 13 ) galilei_transformation
369	CASE ( 'grid_matching' )
370	READ ( 13 ) grid_matching
371	CASE ( 'hom' )
372	READ ( 13 ) hom
373	CASE ( 'hom_sum' )
374	READ ( 13 ) hom_sum
375	CASE ( 'humidity' )
376	READ ( 13 ) humidity
377	CASE ( 'inflow_damping_factor' )
378	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
379	ALLOCATE( inflow_damping_factor(0:nz+1) )
380	ENDIF
381	READ ( 13 ) inflow_damping_factor
382	CASE ( 'inflow_damping_height' )
383	READ ( 13 ) inflow_damping_height
384	CASE ( 'inflow_damping_width' )
385	READ ( 13 ) inflow_damping_width
386	CASE ( 'inflow_disturbance_begin' )
387	READ ( 13 ) inflow_disturbance_begin
388	CASE ( 'inflow_disturbance_end' )
389	READ ( 13 ) inflow_disturbance_end
390	CASE ( 'km_constant' )
391	READ ( 13 ) km_constant
392	CASE ( 'lad' )
393	READ ( 13 ) lad
394	CASE ( 'lad_surface' )
395	READ ( 13 ) lad_surface
396	CASE ( 'lad_vertical_gradient' )
397	READ ( 13 ) lad_vertical_gradient
398	CASE ( 'lad_vertical_gradient_level' )
399	READ ( 13 ) lad_vertical_gradient_level
400	CASE ( 'lad_vertical_gradient_level_in' )
401	READ ( 13 ) lad_vertical_gradient_level_ind
402	CASE ( 'last_dt_change' )
403	READ ( 13 ) last_dt_change
404	CASE ( 'large_scale_subsidence' )
405	READ ( 13 ) large_scale_subsidence
406	CASE ( 'leaf_surface_concentration' )
407	READ ( 13 ) leaf_surface_concentration
408	CASE ( 'long_filter_factor' )
409	READ ( 13 ) long_filter_factor
410	CASE ( 'loop_optimization' )
411	READ ( 13 ) loop_optimization
412	CASE ( 'masking_method' )
413	READ ( 13 ) masking_method
414	CASE ( 'mean_inflow_profiles' )
415	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
416	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
417	ENDIF
418	READ ( 13 ) mean_inflow_profiles
419	CASE ( 'mg_cycles' )
420	READ ( 13 ) mg_cycles
421	CASE ( 'mg_switch_to_pe0_level' )
422	READ ( 13 ) mg_switch_to_pe0_level
423	CASE ( 'mixing_length_1d' )
424	READ ( 13 ) mixing_length_1d
425	CASE ( 'momentum_advec' )
426	READ ( 13 ) momentum_advec
427	CASE ( 'netcdf_precision' )
428	READ ( 13 ) netcdf_precision
429	CASE ( 'neutral' )
430	READ ( 13 ) neutral
431	CASE ( 'ngsrb' )
432	READ ( 13 ) ngsrb
433	CASE ( 'nsor' )
434	READ ( 13 ) nsor
435	CASE ( 'nsor_ini' )
436	READ ( 13 ) nsor_ini
437	CASE ( 'nx' )
438	READ ( 13 ) nx
439	nx_on_file = nx
440	CASE ( 'ny' )
441	READ ( 13 ) ny
442	ny_on_file = ny
443	CASE ( 'ocean' )
444	READ ( 13 ) ocean
445	CASE ( 'old_dt' )
446	READ ( 13 ) old_dt
447	CASE ( 'omega' )
448	READ ( 13 ) omega
449	CASE ( 'omega_sor' )
450	READ ( 13 ) omega_sor
451	CASE ( 'output_for_t0' )
452	READ (13) output_for_t0
453	CASE ( 'overshoot_limit_e' )
454	READ ( 13 ) overshoot_limit_e
455	CASE ( 'overshoot_limit_pt' )
456	READ ( 13 ) overshoot_limit_pt
457	CASE ( 'overshoot_limit_u' )
458	READ ( 13 ) overshoot_limit_u
459	CASE ( 'overshoot_limit_v' )
460	READ ( 13 ) overshoot_limit_v
461	CASE ( 'overshoot_limit_w' )
462	READ ( 13 ) overshoot_limit_w
463	CASE ( 'passive_scalar' )
464	READ ( 13 ) passive_scalar
465	CASE ( 'pch_index' )
466	READ ( 13 ) pch_index
467	CASE ( 'phi' )
468	READ ( 13 ) phi
469	CASE ( 'plant_canopy' )
470	READ ( 13 ) plant_canopy
471	CASE ( 'prandtl_layer' )
472	READ ( 13 ) prandtl_layer
473	CASE ( 'prandtl_number' )
474	READ ( 13 ) prandtl_number
475	CASE ( 'precipitation' )
476	READ ( 13 ) precipitation
477	CASE ( 'psolver' )
478	READ ( 13 ) psolver
479	CASE ( 'pt_damping_factor' )
480	READ ( 13 ) pt_damping_factor
481	CASE ( 'pt_damping_width' )
482	READ ( 13 ) pt_damping_width
483	CASE ( 'pt_init' )
484	READ ( 13 ) pt_init
485	CASE ( 'pt_reference' )
486	READ ( 13 ) pt_reference
487	CASE ( 'pt_surface' )
488	READ ( 13 ) pt_surface
489	CASE ( 'pt_surface_initial_change' )
490	READ ( 13 ) pt_surface_initial_change
491	CASE ( 'pt_vertical_gradient' )
492	READ ( 13 ) pt_vertical_gradient
493	CASE ( 'pt_vertical_gradient_level' )
494	READ ( 13 ) pt_vertical_gradient_level
495	CASE ( 'pt_vertical_gradient_level_ind' )
496	READ ( 13 ) pt_vertical_gradient_level_ind
497	CASE ( 'q_init' )
498	READ ( 13 ) q_init
499	CASE ( 'q_surface' )
500	READ ( 13 ) q_surface
501	CASE ( 'q_surface_initial_change' )
502	READ ( 13 ) q_surface_initial_change
503	CASE ( 'q_vertical_gradient' )
504	READ ( 13 ) q_vertical_gradient
505	CASE ( 'q_vertical_gradient_level' )
506	READ ( 13 ) q_vertical_gradient_level
507	CASE ( 'q_vertical_gradient_level_ind' )
508	READ ( 13 ) q_vertical_gradient_level_ind
509	CASE ( 'radiation' )
510	READ ( 13 ) radiation
511	CASE ( 'random_generator' )
512	READ ( 13 ) random_generator
513	CASE ( 'random_heatflux' )
514	READ ( 13 ) random_heatflux
515	CASE ( 'rayleigh_damping_factor' )
516	READ ( 13 ) rayleigh_damping_factor
517	CASE ( 'rayleigh_damping_height' )
518	READ ( 13 ) rayleigh_damping_height
519	CASE ( 'recycling_width' )
520	READ ( 13 ) recycling_width
521	CASE ( 'residual_limit' )
522	READ ( 13 ) residual_limit
523	CASE ( 'rif_max' )
524	READ ( 13 ) rif_max
525	CASE ( 'rif_min' )
526	READ ( 13 ) rif_min
527	CASE ( 'roughness_length' )
528	READ ( 13 ) roughness_length
529	CASE ( 'runnr' )
530	READ ( 13 ) runnr
531	CASE ( 'run_coupled' )
532	READ ( 13 ) run_coupled
533	CASE ( 'sa_init' )
534	READ ( 13 ) sa_init
535	CASE ( 'sa_surface' )
536	READ ( 13 ) sa_surface
537	CASE ( 'sa_vertical_gradient' )
538	READ ( 13 ) sa_vertical_gradient
539	CASE ( 'sa_vertical_gradient_level' )
540	READ ( 13 ) sa_vertical_gradient_level
541	CASE ( 'scalar_advec' )
542	READ ( 13 ) scalar_advec
543	CASE ( 'scalar_exchange_coefficient' )
544	READ ( 13 ) scalar_exchange_coefficient
545	CASE ( 'simulated_time' )
546	READ ( 13 ) simulated_time
547	CASE ( 'surface_heatflux' )
548	READ ( 13 ) surface_heatflux
549	CASE ( 'surface_pressure' )
550	READ ( 13 ) surface_pressure
551	CASE ( 'surface_scalarflux' )
552	READ ( 13 ) surface_scalarflux
553	CASE ( 'surface_waterflux' )
554	READ ( 13 ) surface_waterflux
555	CASE ( 's_surface' )
556	READ ( 13 ) s_surface
557	CASE ( 's_surface_initial_change' )
558	READ ( 13 ) s_surface_initial_change
559	CASE ( 's_vertical_gradient' )
560	READ ( 13 ) s_vertical_gradient
561	CASE ( 's_vertical_gradient_level' )
562	READ ( 13 ) s_vertical_gradient_level
563	CASE ( 'time_coupling' )
564	READ ( 13 ) time_coupling
565	CASE ( 'time_disturb' )
566	READ ( 13 ) time_disturb
567	CASE ( 'time_dopr' )
568	READ ( 13 ) time_dopr
569	CASE ( 'time_domask' )
570	READ ( 13 ) time_domask
571	CASE ( 'time_dopr_av' )
572	READ ( 13 ) time_dopr_av
573	CASE ( 'time_dopr_listing' )
574	READ ( 13 ) time_dopr_listing
575	CASE ( 'time_dopts' )
576	READ ( 13 ) time_dopts
577	CASE ( 'time_dosp' )
578	READ ( 13 ) time_dosp
579	CASE ( 'time_dots' )
580	READ ( 13 ) time_dots
581	CASE ( 'time_do2d_xy' )
582	READ ( 13 ) time_do2d_xy
583	CASE ( 'time_do2d_xz' )
584	READ ( 13 ) time_do2d_xz
585	CASE ( 'time_do2d_yz' )
586	READ ( 13 ) time_do2d_yz
587	CASE ( 'time_do3d' )
588	READ ( 13 ) time_do3d
589	CASE ( 'time_do_av' )
590	READ ( 13 ) time_do_av
591	CASE ( 'time_do_sla' )
592	READ ( 13 ) time_do_sla
593	CASE ( 'time_dvrp' )
594	READ ( 13 ) time_dvrp
595	CASE ( 'time_restart' )
596	READ ( 13 ) time_restart
597	CASE ( 'time_run_control' )
598	READ ( 13 ) time_run_control
599	CASE ( 'time_since_reference_point' )
600	READ ( 13 ) time_since_reference_point
601	CASE ( 'time_sort_particles' )
602	READ ( 13 ) time_sort_particles
603	CASE ( 'timestep_scheme' )
604	READ ( 13 ) timestep_scheme
605	CASE ( 'topography' )
606	READ ( 13 ) topography
607	CASE ( 'topography_grid_convention' )
608	READ ( 13 ) topography_grid_convention
609	CASE ( 'top_heatflux' )
610	READ ( 13 ) top_heatflux
611	CASE ( 'top_momentumflux_u' )
612	READ ( 13 ) top_momentumflux_u
613	CASE ( 'top_momentumflux_v' )
614	READ ( 13 ) top_momentumflux_v
615	CASE ( 'top_salinityflux' )
616	READ ( 13 ) top_salinityflux
617	CASE ( 'tsc' )
618	READ ( 13 ) tsc
619	CASE ( 'turbulent_inflow' )
620	READ ( 13 ) turbulent_inflow
621	CASE ( 'u_bulk' )
622	READ ( 13 ) u_bulk
623	CASE ( 'u_init' )
624	READ ( 13 ) u_init
625	CASE ( 'u_max' )
626	READ ( 13 ) u_max
627	CASE ( 'u_max_ijk' )
628	READ ( 13 ) u_max_ijk
629	CASE ( 'ug' )
630	READ ( 13 ) ug
631	CASE ( 'ug_surface' )
632	READ ( 13 ) ug_surface
633	CASE ( 'ug_vertical_gradient' )
634	READ ( 13 ) ug_vertical_gradient
635	CASE ( 'ug_vertical_gradient_level' )
636	READ ( 13 ) ug_vertical_gradient_level
637	CASE ( 'ug_vertical_gradient_level_ind' )
638	READ ( 13 ) ug_vertical_gradient_level_ind
639	CASE ( 'ups_limit_e' )
640	READ ( 13 ) ups_limit_e
641	CASE ( 'ups_limit_pt' )
642	READ ( 13 ) ups_limit_pt
643	CASE ( 'ups_limit_u' )
644	READ ( 13 ) ups_limit_u
645	CASE ( 'ups_limit_v' )
646	READ ( 13 ) ups_limit_v
647	CASE ( 'ups_limit_w' )
648	READ ( 13 ) ups_limit_w
649	CASE ( 'use_surface_fluxes' )
650	READ ( 13 ) use_surface_fluxes
651	CASE ( 'use_top_fluxes' )
652	READ ( 13 ) use_top_fluxes
653	CASE ( 'use_ug_for_galilei_tr' )
654	READ ( 13 ) use_ug_for_galilei_tr
655	CASE ( 'use_upstream_for_tke' )
656	READ ( 13 ) use_upstream_for_tke
657	CASE ( 'v_bulk' )
658	READ ( 13 ) v_bulk
659	CASE ( 'v_init' )
660	READ ( 13 ) v_init
661	CASE ( 'v_max' )
662	READ ( 13 ) v_max
663	CASE ( 'v_max_ijk' )
664	READ ( 13 ) v_max_ijk
665	CASE ( 'vg' )
666	READ ( 13 ) vg
667	CASE ( 'vg_surface' )
668	READ ( 13 ) vg_surface
669	CASE ( 'vg_vertical_gradient' )
670	READ ( 13 ) vg_vertical_gradient
671	CASE ( 'vg_vertical_gradient_level' )
672	READ ( 13 ) vg_vertical_gradient_level
673	CASE ( 'vg_vertical_gradient_level_ind' )
674	READ ( 13 ) vg_vertical_gradient_level_ind
675	CASE ( 'volume_flow_area' )
676	READ ( 13 ) volume_flow_area
677	CASE ( 'volume_flow_initial' )
678	READ ( 13 ) volume_flow_initial
679	CASE ( 'wall_adjustment' )
680	READ ( 13 ) wall_adjustment
681	CASE ( 'subs_vertical_gradient' )
682	READ ( 13 ) subs_vertical_gradient
683	CASE ( 'subs_vertical_gradient_level' )
684	READ ( 13 ) subs_vertical_gradient_level
685	CASE ( 'subs_vertical_gradient_level_i' )
686	READ ( 13 ) subs_vertical_gradient_level_i
687	CASE ( 'w_max' )
688	READ ( 13 ) w_max
689	CASE ( 'w_max_ijk' )
690	READ ( 13 ) w_max_ijk
691	CASE ( 'z0h_factor' )
692	READ ( 13 ) z0h_factor
693
694	CASE DEFAULT
695	WRITE( message_string, * ) 'unknown variable named "', &
696	TRIM( variable_chr ), '" found in', &
697	' data from prior run on PE ', myid
698	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
699	END SELECT
700	!
701	!-- Read next string
702	READ ( 13 ) variable_chr
703
704	ENDDO
705
706
707	END SUBROUTINE read_var_list
708
709
710
711	SUBROUTINE read_parts_of_var_list
712
713	!------------------------------------------------------------------------------!
714	! Description:
715	! ------------
716	! Skipping the global control variables from restart-file (binary format)
717	! except some informations needed when reading restart data from a previous
718	! run which used a smaller total domain or/and a different domain decomposition.
719	!------------------------------------------------------------------------------!
720
721	USE arrays_3d
722	USE control_parameters
723	USE indices
724	USE pegrid
725	USE statistics
726
727	IMPLICIT NONE
728
729	CHARACTER (LEN=10) :: version_on_file
730	CHARACTER (LEN=30) :: variable_chr
731	CHARACTER (LEN=1) :: cdum
732
733	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
734	statistic_regions_on_file, tmp_mpru, tmp_sr
735
736	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
737	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
738
739
740	CALL check_open( 13 )
741
742	WRITE (9,*) 'rpovl: after check open 13'
743	CALL local_flush( 9 )
744	READ ( 13 ) version_on_file
745
746	!
747	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
748	!-- run
749	READ ( 13 ) variable_chr
750	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
751	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
752	'run on PE ', myid
753	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
754	ENDIF
755	READ ( 13 ) numprocs_previous_run
756
757	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
758	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
759	ENDIF
760
761	READ ( 13 ) variable_chr
762	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
763	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
764	'prior run on PE ', myid
765	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
766	ENDIF
767	READ ( 13 ) hor_index_bounds_previous_run
768
769	!
770	!-- Read vertical number of gridpoints and number of different areas used
771	!-- for computing statistics. Allocate arrays depending on these values,
772	!-- which are needed for the following read instructions.
773	READ ( 13 ) variable_chr
774	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
775	message_string = 'nz not found in restart data file'
776	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
777	ENDIF
778	READ ( 13 ) nz_on_file
779	IF ( nz_on_file /= nz ) THEN
780	WRITE( message_string, * ) 'mismatch concerning number of ', &
781	'gridpoints along z', &
782	'&nz on file = "', nz_on_file, '"', &
783	'&nz from run = "', nz, '"'
784	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
785	ENDIF
786
787	READ ( 13 ) variable_chr
788	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
789	message_string = 'max_pr_user not found in restart data file'
790	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
791	ENDIF
792	READ ( 13 ) max_pr_user_on_file
793	IF ( max_pr_user_on_file /= max_pr_user ) THEN
794	WRITE( message_string, * ) 'number of user profiles on res', &
795	'tart data file differs from the current ', &
796	'run&max_pr_user on file = "', &
797	max_pr_user_on_file, '"', &
798	'&max_pr_user from run = "', &
799	max_pr_user, '"'
800	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
801	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
802	ELSE
803	tmp_mpru = max_pr_user
804	ENDIF
805
806	READ ( 13 ) variable_chr
807	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
808	message_string = 'statistic_regions not found in restart data file'
809	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
810	ENDIF
811	READ ( 13 ) statistic_regions_on_file
812	IF ( statistic_regions_on_file /= statistic_regions ) THEN
813	WRITE( message_string, * ) 'statistic regions on restart data file ',&
814	'differ from the current run', &
815	'&statistic regions on file = "', &
816	statistic_regions_on_file, '"', &
817	'&statistic regions from run = "', &
818	statistic_regions, '"', &
819	'&statistic data may be lost!'
820	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
821	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
822	ELSE
823	tmp_sr = statistic_regions
824	ENDIF
825
826
827	!
828	!-- Now read and check some control parameters and skip the rest
829	WRITE (9,*) 'wpovl: begin reading variables'
830	CALL local_flush( 9 )
831	READ ( 13 ) variable_chr
832
833	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
834
835	SELECT CASE ( TRIM( variable_chr ) )
836
837	CASE ( 'average_count_pr' )
838	READ ( 13 ) average_count_pr
839	IF ( average_count_pr /= 0 ) THEN
840	WRITE( message_string, * ) 'inflow profiles not temporally ', &
841	'averaged. &Averaging will be done now using ', &
842	average_count_pr, ' samples.'
843	CALL message( 'read_parts_of_var_list', 'PA0309', &
844	0, 1, 0, 6, 0 )
845	ENDIF
846
847	CASE ( 'hom' )
848	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
849	0:statistic_regions_on_file) )
850	READ ( 13 ) hom_on_file
851	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
852	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
853	DEALLOCATE( hom_on_file )
854
855	CASE ( 'hom_sum' )
856	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
857	0:statistic_regions_on_file) )
858	READ ( 13 ) hom_sum_on_file
859	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
860	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
861	DEALLOCATE( hom_sum_on_file )
862
863	CASE ( 'nx' )
864	READ ( 13 ) nx_on_file
865
866	CASE ( 'ny' )
867	READ ( 13 ) ny_on_file
868
869
870	CASE DEFAULT
871
872	READ ( 13 ) cdum
873
874	END SELECT
875
876	READ ( 13 ) variable_chr
877
878	ENDDO
879
880	!
881	!-- Calculate the temporal average of vertical profiles, if neccessary
882	IF ( average_count_pr /= 0 ) THEN
883	hom_sum = hom_sum / REAL( average_count_pr )
884	ENDIF
885
886
887	END SUBROUTINE read_parts_of_var_list
888
889
890
891	SUBROUTINE skip_var_list
892
893	!------------------------------------------------------------------------------!
894	! Description:
895	! ------------
896	! Skipping the global control variables from restart-file (binary format)
897	!------------------------------------------------------------------------------!
898
899	IMPLICIT NONE
900
901	CHARACTER (LEN=10) :: version_on_file
902	CHARACTER (LEN=30) :: variable_chr
903
904	CHARACTER (LEN=1) :: cdum
905
906
907	WRITE (9,*) 'skipvl #1'
908	CALL local_flush( 9 )
909	READ ( 13 ) version_on_file
910
911	WRITE (9,*) 'skipvl before variable_chr'
912	CALL local_flush( 9 )
913	READ ( 13 ) variable_chr
914	WRITE (9,*) 'skipvl after variable_chr'
915	CALL local_flush( 9 )
916
917	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
918
919	WRITE (9,*) 'skipvl chr = ', variable_chr
920	CALL local_flush( 9 )
921	READ ( 13 ) cdum
922	READ ( 13 ) variable_chr
923
924	ENDDO
925	WRITE (9,*) 'skipvl last'
926	CALL local_flush( 9 )
927
928
929	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |