Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 623

Last change on this file since 623 was 623, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 32.9 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 623 2010-12-10 08:52:17Z raasch $
11	!
12	! 622 2010-12-10 08:08:13Z raasch
13	! +collective_wait
14	!
15	! 600 2010-11-24 16:10:51Z raasch
16	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
17	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
18	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
19	! in routine skip_var_list (end of this file), variable ldum is replaced
20	! by cdum(LEN=1), because otherwise read errors (too few data on file)
21	! appear due to one of the additional parameters (cycle_mg) which are now
22	! stored on the restart file
23	!
24	! 591 2010-10-28 06:35:52Z helmke
25	! remove print command
26	!
27	! 587 2010-10-27 08:36:51Z helmke
28	! +time_domask
29	!
30	! 580 2010-10-05 13:59:11Z heinze
31	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
32	! ws_vertical_gradient_level to subs_vertical_gradient_level and
33	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
34	!
35	! 411 2009-12-11 14:15:58Z heinze
36	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
37	! ws_vertical_gradient_level_ind
38	!
39	! 345 2009-07-01 14:37:56Z heinze
40	! +output_for_t0
41	! dt_fixed is read into a dummy variable.
42	! Output of messages replaced by message handling routine.
43	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
44	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
45	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
46	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
47	!
48	! 216 2008-11-25 07:12:43Z raasch
49	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
50	!
51	! 173 2008-05-23 20:39:38Z raasch
52	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
53	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
54	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
55	! recycling_width, turbulent_inflow,
56	! -cross_ts_*, npex, npey,
57	! hom_sum, volume_flow_area, volume_flow_initial moved from
58	! read_3d_binary to here,
59	! routines read_parts_of_var_list and skip_var_list added at the end
60	!
61	! 138 2007-11-28 10:03:58Z letzel
62	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
63	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
64	! plant_canopy, time_sort_particles
65	!
66	! 102 2007-07-27 09:09:17Z raasch
67	! +time_coupling, top_momentumflux_u\|v
68	!
69	! 95 2007-06-02 16:48:38Z raasch
70	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
71	! sa_vertical_gradient_level, bottom/top_salinity_flux
72	!
73	! 87 2007-05-22 15:46:47Z raasch
74	! +max_pr_user (version 3.1), var_hom renamed pr_palm
75	!
76	! 75 2007-03-22 09:54:05Z raasch
77	! +loop_optimization, pt_reference, moisture renamed humidity
78	!
79	! 20 2007-02-26 00:12:32Z raasch
80	! +top_heatflux, use_top_fluxes
81	!
82	! RCS Log replace by Id keyword, revision history cleaned up
83	!
84	! Revision 1.34 2006/08/22 14:14:27 raasch
85	! +dz_max
86	!
87	! Revision 1.1 1998/03/18 20:18:48 raasch
88	! Initial revision
89	!
90	!
91	! Description:
92	! ------------
93	! Reading values of global control variables from restart-file (binary format)
94	!------------------------------------------------------------------------------!
95
96	USE arrays_3d
97	USE averaging
98	USE control_parameters
99	USE grid_variables
100	USE indices
101	USE model_1d
102	USE netcdf_control
103	USE particle_attributes
104	USE pegrid
105	USE profil_parameter
106	USE statistics
107
108	IMPLICIT NONE
109
110	CHARACTER (LEN=10) :: binary_version, version_on_file
111	CHARACTER (LEN=30) :: variable_chr
112
113	LOGICAL :: ldum
114
115
116	CALL check_open( 13 )
117
118	!
119	!-- Make version number check first
120	READ ( 13 ) version_on_file
121	binary_version = '3.5'
122	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
123	WRITE( message_string, * ) 'version mismatch concerning control ', &
124	'variables', &
125	'&version on file = "', &
126	TRIM( version_on_file ), '"', &
127	'&version on program = "', &
128	TRIM( binary_version ), '"'
129	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
130	ENDIF
131
132	!
133	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
134	!-- run
135	READ ( 13 ) variable_chr
136	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
137	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
138	'run on PE ', myid
139	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
140	ENDIF
141	READ ( 13 ) numprocs_previous_run
142
143	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
144	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
145	ENDIF
146
147	READ ( 13 ) variable_chr
148	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
149	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
150	'prior run on PE ', myid
151	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
152	ENDIF
153	READ ( 13 ) hor_index_bounds_previous_run
154
155	!
156	!-- Read vertical number of gridpoints and number of different areas used
157	!-- for computing statistics. Allocate arrays depending on these values,
158	!-- which are needed for the following read instructions.
159	READ ( 13 ) variable_chr
160	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
161	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
162	myid
163	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
164	ENDIF
165	READ ( 13 ) nz
166
167	READ ( 13 ) variable_chr
168	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
169	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
170	'prior run on PE ', myid
171	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
172	ENDIF
173	READ ( 13 ) max_pr_user ! This value is checked against the number of
174	! user profiles given for the current run
175	! in routine user_parin (it has to match)
176
177	READ ( 13 ) variable_chr
178	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
179	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
180	'prior run on PE ', myid
181	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
182	ENDIF
183	READ ( 13 ) statistic_regions
184	IF ( .NOT. ALLOCATED( ug ) ) THEN
185	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
186	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
187	sa_init(0:nz+1), &
188	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
189	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
190	ENDIF
191
192	!
193	!-- Now read all control parameters:
194	!-- Caution: When the following read instructions have been changed, the
195	!-- ------- version number stored in the variable binary_version has to be
196	!-- increased. The same changes must also be done in write_var_list.
197	READ ( 13 ) variable_chr
198	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
199
200	SELECT CASE ( TRIM( variable_chr ) )
201
202	CASE ( 'adjust_mixing_length' )
203	READ ( 13 ) adjust_mixing_length
204	CASE ( 'advected_distance_x' )
205	READ ( 13 ) advected_distance_x
206	CASE ( 'advected_distance_y' )
207	READ ( 13 ) advected_distance_y
208	CASE ( 'alpha_surface' )
209	READ ( 13 ) alpha_surface
210	CASE ( 'average_count_pr' )
211	READ ( 13 ) average_count_pr
212	CASE ( 'average_count_sp' )
213	READ ( 13 ) average_count_sp
214	CASE ( 'average_count_3d' )
215	READ ( 13 ) average_count_3d
216	CASE ( 'bc_e_b' )
217	READ ( 13 ) bc_e_b
218	CASE ( 'bc_lr' )
219	READ ( 13 ) bc_lr
220	CASE ( 'bc_ns' )
221	READ ( 13 ) bc_ns
222	CASE ( 'bc_p_b' )
223	READ ( 13 ) bc_p_b
224	CASE ( 'bc_p_t' )
225	READ ( 13 ) bc_p_t
226	CASE ( 'bc_pt_b' )
227	READ ( 13 ) bc_pt_b
228	CASE ( 'bc_pt_t' )
229	READ ( 13 ) bc_pt_t
230	CASE ( 'bc_pt_t_val' )
231	READ ( 13 ) bc_pt_t_val
232	CASE ( 'bc_q_b' )
233	READ ( 13 ) bc_q_b
234	CASE ( 'bc_q_t' )
235	READ ( 13 ) bc_q_t
236	CASE ( 'bc_q_t_val' )
237	READ ( 13 ) bc_q_t_val
238	CASE ( 'bc_s_b' )
239	READ ( 13 ) bc_s_b
240	CASE ( 'bc_s_t' )
241	READ ( 13 ) bc_s_t
242	CASE ( 'bc_sa_t' )
243	READ ( 13 ) bc_sa_t
244	CASE ( 'bc_uv_b' )
245	READ ( 13 ) bc_uv_b
246	CASE ( 'bc_uv_t' )
247	READ ( 13 ) bc_uv_t
248	CASE ( 'bottom_salinityflux' )
249	READ ( 13 ) bottom_salinityflux
250	CASE ( 'building_height' )
251	READ ( 13 ) building_height
252	CASE ( 'building_length_x' )
253	READ ( 13 ) building_length_x
254	CASE ( 'building_length_y' )
255	READ ( 13 ) building_length_y
256	CASE ( 'building_wall_left' )
257	READ ( 13 ) building_wall_left
258	CASE ( 'building_wall_south' )
259	READ ( 13 ) building_wall_south
260	CASE ( 'call_psolver_at_all_substeps' )
261	READ ( 13 ) call_psolver_at_all_substeps
262	CASE ( 'canopy_mode' )
263	READ ( 13 ) canopy_mode
264	CASE ( 'canyon_height' )
265	READ ( 13 ) canyon_height
266	CASE ( 'canyon_width_x' )
267	READ ( 13 ) canyon_width_x
268	CASE ( 'canyon_width_y' )
269	READ ( 13 ) canyon_width_y
270	CASE ( 'canyon_wall_left' )
271	READ ( 13 ) canyon_wall_left
272	CASE ( 'canyon_wall_south' )
273	READ ( 13 ) canyon_wall_south
274	CASE ( 'cfl_factor' )
275	READ ( 13 ) cfl_factor
276	CASE ( 'cloud_droplets' )
277	READ ( 13 ) cloud_droplets
278	CASE ( 'cloud_physics' )
279	READ ( 13 ) cloud_physics
280	CASE ( 'collective_wait' )
281	READ ( 13 ) collective_wait
282	CASE ( 'conserve_volume_flow' )
283	READ ( 13 ) conserve_volume_flow
284	CASE ( 'conserve_volume_flow_mode' )
285	READ ( 13 ) conserve_volume_flow_mode
286	CASE ( 'coupling_start_time' )
287	READ ( 13 ) coupling_start_time
288	CASE ( 'cthf' )
289	READ ( 13 ) cthf
290	CASE ( 'current_timestep_number' )
291	READ ( 13 ) current_timestep_number
292	CASE ( 'cut_spline_overshoot' )
293	READ ( 13 ) cut_spline_overshoot
294	CASE ( 'cycle_mg' )
295	READ ( 13 ) cycle_mg
296	CASE ( 'damp_level_1d' )
297	READ ( 13 ) damp_level_1d
298	CASE ( 'dissipation_1d' )
299	READ ( 13 ) dissipation_1d
300	CASE ( 'dp_external' )
301	READ ( 13 ) dp_external
302	CASE ( 'dp_level_b' )
303	READ ( 13 ) dp_level_b
304	CASE ( 'dp_smooth' )
305	READ ( 13 ) dp_smooth
306	CASE ( 'dpdxy' )
307	READ ( 13 ) dpdxy
308	CASE ( 'drag_coefficient' )
309	READ ( 13 ) drag_coefficient
310	CASE ( 'dt_fixed' )
311	READ ( 13 ) ldum ! restart files created before rev 333
312	! contained dt_fixed by mistake; it is still
313	! read here in order to allow usage of these
314	! older restart files; can be removed in a
315	! later version
316	CASE ( 'dt_pr_1d' )
317	READ ( 13 ) dt_pr_1d
318	CASE ( 'dt_run_control_1d' )
319	READ ( 13 ) dt_run_control_1d
320	CASE ( 'dt_3d' )
321	READ ( 13 ) dt_3d
322	CASE ( 'dvrp_filecount' )
323	READ ( 13 ) dvrp_filecount
324	CASE ( 'dx' )
325	READ ( 13 ) dx
326	CASE ( 'dy' )
327	READ ( 13 ) dy
328	CASE ( 'dz' )
329	READ ( 13 ) dz
330	CASE ( 'dz_max' )
331	READ ( 13 ) dz_max
332	CASE ( 'dz_stretch_factor' )
333	READ ( 13 ) dz_stretch_factor
334	CASE ( 'dz_stretch_level' )
335	READ ( 13 ) dz_stretch_level
336	CASE ( 'e_min' )
337	READ ( 13 ) e_min
338	CASE ( 'end_time_1d' )
339	READ ( 13 ) end_time_1d
340	CASE ( 'fft_method' )
341	READ ( 13 ) fft_method
342	CASE ( 'first_call_advec_particles' )
343	READ ( 13 ) first_call_advec_particles
344	CASE ( 'galilei_transformation' )
345	READ ( 13 ) galilei_transformation
346	CASE ( 'grid_matching' )
347	READ ( 13 ) grid_matching
348	CASE ( 'hom' )
349	READ ( 13 ) hom
350	CASE ( 'hom_sum' )
351	READ ( 13 ) hom_sum
352	CASE ( 'humidity' )
353	READ ( 13 ) humidity
354	CASE ( 'inflow_damping_factor' )
355	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
356	ALLOCATE( inflow_damping_factor(0:nz+1) )
357	ENDIF
358	READ ( 13 ) inflow_damping_factor
359	CASE ( 'inflow_damping_height' )
360	READ ( 13 ) inflow_damping_height
361	CASE ( 'inflow_damping_width' )
362	READ ( 13 ) inflow_damping_width
363	CASE ( 'inflow_disturbance_begin' )
364	READ ( 13 ) inflow_disturbance_begin
365	CASE ( 'inflow_disturbance_end' )
366	READ ( 13 ) inflow_disturbance_end
367	CASE ( 'km_constant' )
368	READ ( 13 ) km_constant
369	CASE ( 'km_damp_max' )
370	READ ( 13 ) km_damp_max
371	CASE ( 'lad' )
372	READ ( 13 ) lad
373	CASE ( 'lad_surface' )
374	READ ( 13 ) lad_surface
375	CASE ( 'lad_vertical_gradient' )
376	READ ( 13 ) lad_vertical_gradient
377	CASE ( 'lad_vertical_gradient_level' )
378	READ ( 13 ) lad_vertical_gradient_level
379	CASE ( 'lad_vertical_gradient_level_in' )
380	READ ( 13 ) lad_vertical_gradient_level_ind
381	CASE ( 'last_dt_change' )
382	READ ( 13 ) last_dt_change
383	CASE ( 'large_scale_subsidence' )
384	READ ( 13 ) large_scale_subsidence
385	CASE ( 'leaf_surface_concentration' )
386	READ ( 13 ) leaf_surface_concentration
387	CASE ( 'long_filter_factor' )
388	READ ( 13 ) long_filter_factor
389	CASE ( 'loop_optimization' )
390	READ ( 13 ) loop_optimization
391	CASE ( 'mean_inflow_profiles' )
392	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
393	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
394	ENDIF
395	READ ( 13 ) mean_inflow_profiles
396	CASE ( 'mg_cycles' )
397	READ ( 13 ) mg_cycles
398	CASE ( 'mg_switch_to_pe0_level' )
399	READ ( 13 ) mg_switch_to_pe0_level
400	CASE ( 'mixing_length_1d' )
401	READ ( 13 ) mixing_length_1d
402	CASE ( 'momentum_advec' )
403	READ ( 13 ) momentum_advec
404	CASE ( 'netcdf_precision' )
405	READ ( 13 ) netcdf_precision
406	CASE ( 'ngsrb' )
407	READ ( 13 ) ngsrb
408	CASE ( 'nsor' )
409	READ ( 13 ) nsor
410	CASE ( 'nsor_ini' )
411	READ ( 13 ) nsor_ini
412	CASE ( 'nx' )
413	READ ( 13 ) nx
414	nx_on_file = nx
415	CASE ( 'ny' )
416	READ ( 13 ) ny
417	ny_on_file = ny
418	CASE ( 'ocean' )
419	READ ( 13 ) ocean
420	CASE ( 'old_dt' )
421	READ ( 13 ) old_dt
422	CASE ( 'omega' )
423	READ ( 13 ) omega
424	CASE ( 'omega_sor' )
425	READ ( 13 ) omega_sor
426	CASE ( 'outflow_damping_width' )
427	READ ( 13 ) outflow_damping_width
428	CASE ( 'output_for_t0' )
429	READ (13) output_for_t0
430	CASE ( 'overshoot_limit_e' )
431	READ ( 13 ) overshoot_limit_e
432	CASE ( 'overshoot_limit_pt' )
433	READ ( 13 ) overshoot_limit_pt
434	CASE ( 'overshoot_limit_u' )
435	READ ( 13 ) overshoot_limit_u
436	CASE ( 'overshoot_limit_v' )
437	READ ( 13 ) overshoot_limit_v
438	CASE ( 'overshoot_limit_w' )
439	READ ( 13 ) overshoot_limit_w
440	CASE ( 'passive_scalar' )
441	READ ( 13 ) passive_scalar
442	CASE ( 'pch_index' )
443	READ ( 13 ) pch_index
444	CASE ( 'phi' )
445	READ ( 13 ) phi
446	CASE ( 'plant_canopy' )
447	READ ( 13 ) plant_canopy
448	CASE ( 'prandtl_layer' )
449	READ ( 13 ) prandtl_layer
450	CASE ( 'prandtl_number' )
451	READ ( 13 ) prandtl_number
452	CASE ( 'precipitation' )
453	READ ( 13 ) precipitation
454	CASE ( 'psolver' )
455	READ ( 13 ) psolver
456	CASE ( 'pt_init' )
457	READ ( 13 ) pt_init
458	CASE ( 'pt_reference' )
459	READ ( 13 ) pt_reference
460	CASE ( 'pt_surface' )
461	READ ( 13 ) pt_surface
462	CASE ( 'pt_surface_initial_change' )
463	READ ( 13 ) pt_surface_initial_change
464	CASE ( 'pt_vertical_gradient' )
465	READ ( 13 ) pt_vertical_gradient
466	CASE ( 'pt_vertical_gradient_level' )
467	READ ( 13 ) pt_vertical_gradient_level
468	CASE ( 'pt_vertical_gradient_level_ind' )
469	READ ( 13 ) pt_vertical_gradient_level_ind
470	CASE ( 'q_init' )
471	READ ( 13 ) q_init
472	CASE ( 'q_surface' )
473	READ ( 13 ) q_surface
474	CASE ( 'q_surface_initial_change' )
475	READ ( 13 ) q_surface_initial_change
476	CASE ( 'q_vertical_gradient' )
477	READ ( 13 ) q_vertical_gradient
478	CASE ( 'q_vertical_gradient_level' )
479	READ ( 13 ) q_vertical_gradient_level
480	CASE ( 'q_vertical_gradient_level_ind' )
481	READ ( 13 ) q_vertical_gradient_level_ind
482	CASE ( 'radiation' )
483	READ ( 13 ) radiation
484	CASE ( 'random_generator' )
485	READ ( 13 ) random_generator
486	CASE ( 'random_heatflux' )
487	READ ( 13 ) random_heatflux
488	CASE ( 'rayleigh_damping_factor' )
489	READ ( 13 ) rayleigh_damping_factor
490	CASE ( 'rayleigh_damping_height' )
491	READ ( 13 ) rayleigh_damping_height
492	CASE ( 'recycling_width' )
493	READ ( 13 ) recycling_width
494	CASE ( 'residual_limit' )
495	READ ( 13 ) residual_limit
496	CASE ( 'rif_max' )
497	READ ( 13 ) rif_max
498	CASE ( 'rif_min' )
499	READ ( 13 ) rif_min
500	CASE ( 'roughness_length' )
501	READ ( 13 ) roughness_length
502	CASE ( 'runnr' )
503	READ ( 13 ) runnr
504	CASE ( 'run_coupled' )
505	READ ( 13 ) run_coupled
506	CASE ( 'sa_init' )
507	READ ( 13 ) sa_init
508	CASE ( 'sa_surface' )
509	READ ( 13 ) sa_surface
510	CASE ( 'sa_vertical_gradient' )
511	READ ( 13 ) sa_vertical_gradient
512	CASE ( 'sa_vertical_gradient_level' )
513	READ ( 13 ) sa_vertical_gradient_level
514	CASE ( 'scalar_advec' )
515	READ ( 13 ) scalar_advec
516	CASE ( 'scalar_exchange_coefficient' )
517	READ ( 13 ) scalar_exchange_coefficient
518	CASE ( 'simulated_time' )
519	READ ( 13 ) simulated_time
520	CASE ( 'surface_heatflux' )
521	READ ( 13 ) surface_heatflux
522	CASE ( 'surface_pressure' )
523	READ ( 13 ) surface_pressure
524	CASE ( 'surface_scalarflux' )
525	READ ( 13 ) surface_scalarflux
526	CASE ( 'surface_waterflux' )
527	READ ( 13 ) surface_waterflux
528	CASE ( 's_surface' )
529	READ ( 13 ) s_surface
530	CASE ( 's_surface_initial_change' )
531	READ ( 13 ) s_surface_initial_change
532	CASE ( 's_vertical_gradient' )
533	READ ( 13 ) s_vertical_gradient
534	CASE ( 's_vertical_gradient_level' )
535	READ ( 13 ) s_vertical_gradient_level
536	CASE ( 'time_coupling' )
537	READ ( 13 ) time_coupling
538	CASE ( 'time_disturb' )
539	READ ( 13 ) time_disturb
540	CASE ( 'time_dopr' )
541	READ ( 13 ) time_dopr
542	CASE ( 'time_domask' )
543	READ ( 13 ) time_domask
544	CASE ( 'time_dopr_av' )
545	READ ( 13 ) time_dopr_av
546	CASE ( 'time_dopr_listing' )
547	READ ( 13 ) time_dopr_listing
548	CASE ( 'time_dopts' )
549	READ ( 13 ) time_dopts
550	CASE ( 'time_dosp' )
551	READ ( 13 ) time_dosp
552	CASE ( 'time_dots' )
553	READ ( 13 ) time_dots
554	CASE ( 'time_do2d_xy' )
555	READ ( 13 ) time_do2d_xy
556	CASE ( 'time_do2d_xz' )
557	READ ( 13 ) time_do2d_xz
558	CASE ( 'time_do2d_yz' )
559	READ ( 13 ) time_do2d_yz
560	CASE ( 'time_do3d' )
561	READ ( 13 ) time_do3d
562	CASE ( 'time_do_av' )
563	READ ( 13 ) time_do_av
564	CASE ( 'time_do_sla' )
565	READ ( 13 ) time_do_sla
566	CASE ( 'time_dvrp' )
567	READ ( 13 ) time_dvrp
568	CASE ( 'time_restart' )
569	READ ( 13 ) time_restart
570	CASE ( 'time_run_control' )
571	READ ( 13 ) time_run_control
572	CASE ( 'time_since_reference_point' )
573	READ ( 13 ) time_since_reference_point
574	CASE ( 'time_sort_particles' )
575	READ ( 13 ) time_sort_particles
576	CASE ( 'timestep_scheme' )
577	READ ( 13 ) timestep_scheme
578	CASE ( 'topography' )
579	READ ( 13 ) topography
580	CASE ( 'topography_grid_convention' )
581	READ ( 13 ) topography_grid_convention
582	CASE ( 'top_heatflux' )
583	READ ( 13 ) top_heatflux
584	CASE ( 'top_momentumflux_u' )
585	READ ( 13 ) top_momentumflux_u
586	CASE ( 'top_momentumflux_v' )
587	READ ( 13 ) top_momentumflux_v
588	CASE ( 'top_salinityflux' )
589	READ ( 13 ) top_salinityflux
590	CASE ( 'tsc' )
591	READ ( 13 ) tsc
592	CASE ( 'turbulent_inflow' )
593	READ ( 13 ) turbulent_inflow
594	CASE ( 'u_bulk' )
595	READ ( 13 ) u_bulk
596	CASE ( 'u_init' )
597	READ ( 13 ) u_init
598	CASE ( 'u_max' )
599	READ ( 13 ) u_max
600	CASE ( 'u_max_ijk' )
601	READ ( 13 ) u_max_ijk
602	CASE ( 'ug' )
603	READ ( 13 ) ug
604	CASE ( 'ug_surface' )
605	READ ( 13 ) ug_surface
606	CASE ( 'ug_vertical_gradient' )
607	READ ( 13 ) ug_vertical_gradient
608	CASE ( 'ug_vertical_gradient_level' )
609	READ ( 13 ) ug_vertical_gradient_level
610	CASE ( 'ug_vertical_gradient_level_ind' )
611	READ ( 13 ) ug_vertical_gradient_level_ind
612	CASE ( 'ups_limit_e' )
613	READ ( 13 ) ups_limit_e
614	CASE ( 'ups_limit_pt' )
615	READ ( 13 ) ups_limit_pt
616	CASE ( 'ups_limit_u' )
617	READ ( 13 ) ups_limit_u
618	CASE ( 'ups_limit_v' )
619	READ ( 13 ) ups_limit_v
620	CASE ( 'ups_limit_w' )
621	READ ( 13 ) ups_limit_w
622	CASE ( 'use_surface_fluxes' )
623	READ ( 13 ) use_surface_fluxes
624	CASE ( 'use_top_fluxes' )
625	READ ( 13 ) use_top_fluxes
626	CASE ( 'use_ug_for_galilei_tr' )
627	READ ( 13 ) use_ug_for_galilei_tr
628	CASE ( 'use_upstream_for_tke' )
629	READ ( 13 ) use_upstream_for_tke
630	CASE ( 'v_bulk' )
631	READ ( 13 ) v_bulk
632	CASE ( 'v_init' )
633	READ ( 13 ) v_init
634	CASE ( 'v_max' )
635	READ ( 13 ) v_max
636	CASE ( 'v_max_ijk' )
637	READ ( 13 ) v_max_ijk
638	CASE ( 'vg' )
639	READ ( 13 ) vg
640	CASE ( 'vg_surface' )
641	READ ( 13 ) vg_surface
642	CASE ( 'vg_vertical_gradient' )
643	READ ( 13 ) vg_vertical_gradient
644	CASE ( 'vg_vertical_gradient_level' )
645	READ ( 13 ) vg_vertical_gradient_level
646	CASE ( 'vg_vertical_gradient_level_ind' )
647	READ ( 13 ) vg_vertical_gradient_level_ind
648	CASE ( 'volume_flow_area' )
649	READ ( 13 ) volume_flow_area
650	CASE ( 'volume_flow_initial' )
651	READ ( 13 ) volume_flow_initial
652	CASE ( 'wall_adjustment' )
653	READ ( 13 ) wall_adjustment
654	CASE ( 'subs_vertical_gradient' )
655	READ ( 13 ) subs_vertical_gradient
656	CASE ( 'subs_vertical_gradient_level' )
657	READ ( 13 ) subs_vertical_gradient_level
658	CASE ( 'subs_vertical_gradient_level_i' )
659	READ ( 13 ) subs_vertical_gradient_level_i
660	CASE ( 'w_max' )
661	READ ( 13 ) w_max
662	CASE ( 'w_max_ijk' )
663	READ ( 13 ) w_max_ijk
664
665	CASE DEFAULT
666	WRITE( message_string, * ) 'unknown variable named "', &
667	TRIM( variable_chr ), '" found in', &
668	' data from prior run on PE ', myid
669	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
670	END SELECT
671	!
672	!-- Read next string
673	READ ( 13 ) variable_chr
674
675	ENDDO
676
677
678	END SUBROUTINE read_var_list
679
680
681
682	SUBROUTINE read_parts_of_var_list
683
684	!------------------------------------------------------------------------------!
685	! Description:
686	! ------------
687	! Skipping the global control variables from restart-file (binary format)
688	! except some informations needed when reading restart data from a previous
689	! run which used a smaller total domain or/and a different domain decomposition.
690	!------------------------------------------------------------------------------!
691
692	USE arrays_3d
693	USE control_parameters
694	USE indices
695	USE pegrid
696	USE statistics
697
698	IMPLICIT NONE
699
700	CHARACTER (LEN=10) :: version_on_file
701	CHARACTER (LEN=30) :: variable_chr
702
703	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
704	statistic_regions_on_file, tmp_mpru, tmp_sr
705
706	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
707	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
708
709
710	CALL check_open( 13 )
711
712	WRITE (9,*) 'rpovl: after check open 13'
713	CALL local_flush( 9 )
714	READ ( 13 ) version_on_file
715
716	!
717	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
718	!-- run
719	READ ( 13 ) variable_chr
720	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
721	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
722	'run on PE ', myid
723	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
724	ENDIF
725	READ ( 13 ) numprocs_previous_run
726
727	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
728	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
729	ENDIF
730
731	READ ( 13 ) variable_chr
732	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
733	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
734	'prior run on PE ', myid
735	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
736	ENDIF
737	READ ( 13 ) hor_index_bounds_previous_run
738
739	!
740	!-- Read vertical number of gridpoints and number of different areas used
741	!-- for computing statistics. Allocate arrays depending on these values,
742	!-- which are needed for the following read instructions.
743	READ ( 13 ) variable_chr
744	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
745	message_string = 'nz not found in restart data file'
746	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
747	ENDIF
748	READ ( 13 ) nz_on_file
749	IF ( nz_on_file /= nz ) THEN
750	WRITE( message_string, * ) 'mismatch concerning number of ', &
751	'gridpoints along z', &
752	'&nz on file = "', nz_on_file, '"', &
753	'&nz from run = "', nz, '"'
754	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
755	ENDIF
756
757	READ ( 13 ) variable_chr
758	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
759	message_string = 'max_pr_user not found in restart data file'
760	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
761	ENDIF
762	READ ( 13 ) max_pr_user_on_file
763	IF ( max_pr_user_on_file /= max_pr_user ) THEN
764	WRITE( message_string, * ) 'number of user profiles on res', &
765	'tart data file differs from the current ', &
766	'run&max_pr_user on file = "', &
767	max_pr_user_on_file, '"', &
768	'&max_pr_user from run = "', &
769	max_pr_user, '"'
770	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
771	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
772	ELSE
773	tmp_mpru = max_pr_user
774	ENDIF
775
776	READ ( 13 ) variable_chr
777	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
778	message_string = 'statistic_regions not found in restart data file'
779	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
780	ENDIF
781	READ ( 13 ) statistic_regions_on_file
782	IF ( statistic_regions_on_file /= statistic_regions ) THEN
783	WRITE( message_string, * ) 'statistic regions on restart data file ',&
784	'differ from the current run', &
785	'&statistic regions on file = "', &
786	statistic_regions_on_file, '"', &
787	'&statistic regions from run = "', &
788	statistic_regions, '"', &
789	'&statistic data may be lost!'
790	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
791	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
792	ELSE
793	tmp_sr = statistic_regions
794	ENDIF
795
796
797	!
798	!-- Now read and check some control parameters and skip the rest
799	WRITE (9,*) 'wpovl: begin reading variables'
800	CALL local_flush( 9 )
801	READ ( 13 ) variable_chr
802
803	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
804
805	SELECT CASE ( TRIM( variable_chr ) )
806
807	CASE ( 'average_count_pr' )
808	READ ( 13 ) average_count_pr
809	IF ( average_count_pr /= 0 ) THEN
810	WRITE( message_string, * ) 'inflow profiles not temporally ', &
811	'averaged. &Averaging will be done now using ', &
812	average_count_pr, ' samples.'
813	CALL message( 'read_parts_of_var_list', 'PA0309', &
814	0, 1, 0, 6, 0 )
815	ENDIF
816
817	CASE ( 'hom' )
818	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
819	0:statistic_regions_on_file) )
820	READ ( 13 ) hom_on_file
821	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
822	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
823	DEALLOCATE( hom_on_file )
824
825	CASE ( 'hom_sum' )
826	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
827	0:statistic_regions_on_file) )
828	READ ( 13 ) hom_sum_on_file
829	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
830	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
831	DEALLOCATE( hom_sum_on_file )
832
833	CASE ( 'nx' )
834	READ ( 13 ) nx_on_file
835
836	CASE ( 'ny' )
837	READ ( 13 ) ny_on_file
838
839
840	CASE DEFAULT
841
842	READ ( 13 ) idum
843
844	END SELECT
845
846	READ ( 13 ) variable_chr
847
848	ENDDO
849
850	!
851	!-- Calculate the temporal average of vertical profiles, if neccessary
852	IF ( average_count_pr /= 0 ) THEN
853	hom_sum = hom_sum / REAL( average_count_pr )
854	ENDIF
855
856
857	END SUBROUTINE read_parts_of_var_list
858
859
860
861	SUBROUTINE skip_var_list
862
863	!------------------------------------------------------------------------------!
864	! Description:
865	! ------------
866	! Skipping the global control variables from restart-file (binary format)
867	!------------------------------------------------------------------------------!
868
869	IMPLICIT NONE
870
871	CHARACTER (LEN=10) :: version_on_file
872	CHARACTER (LEN=30) :: variable_chr
873
874	CHARACTER (LEN=1) :: cdum
875
876
877	WRITE (9,*) 'skipvl #1'
878	CALL local_flush( 9 )
879	READ ( 13 ) version_on_file
880
881	WRITE (9,*) 'skipvl before variable_chr'
882	CALL local_flush( 9 )
883	READ ( 13 ) variable_chr
884	WRITE (9,*) 'skipvl after variable_chr'
885	CALL local_flush( 9 )
886
887	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
888
889	WRITE (9,*) 'skipvl chr = ', variable_chr
890	CALL local_flush( 9 )
891	READ ( 13 ) cdum
892	READ ( 13 ) variable_chr
893
894	ENDDO
895	WRITE (9,*) 'skipvl last'
896	CALL local_flush( 9 )
897
898
899	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |