Home

Context Navigation

read_var_list.f90 @ 600

Last change on this file since 600 was 600, checked in by raasch, 14 years ago

New:
---

Changed:

Parameters moved from d3par to inipar: call_psolver_at_all_substeps,
cfl_factor, cycle_mg, mg_cycles,mg_switch_to_pe0_level, ngsrb, nsor,
omega_sor, prandtl_number, psolver, rayleigh_damping_factor,
rayleigh_damping_height, residual_limit (parin, read_var_list, write_var_list)

Due to this change, in routine skip_var_list (end of file read_var_list.f90),
variable ldum is replaced by cdum(LEN=1), because otherwise read errors (too
few data on file) would appear due to one of the additional parameters
(cycle_mg, which is a string of one single character) which are now stored
on the restart file.

Weblink to error message database changed to new trac server (message)

Errors:

Bugfix concerning check of cross-section levels on netcdf-files to be
extended (xz,yz) (netcdf)

Bugfix in opening of cross section netcdf-files (parallel opening with
netcdf4 only works for netcdf_data_format > 2) (check_open)

Default values of surface_scalarflux and surface_waterflux changed from 0.0
to 9999999.9. Giving the parameter the default values means, that the
respective surface fluxes are calculated by the MO-relations, so the old default
value did not allow to set the surface fluxes to zero explicitly.

Property svn:keywords set to Id

File size: 32.7 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------_
6	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
7	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
8	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
9	! in routine skip_var_list (end of this file), variable ldum is replaced
10	! by cdum(LEN=1), because otherwise read errors (too few data on file)
11	! appear due to one of the additional parameters (cycle_mg) which are now
12	! stored on the restart file
13	!
14	! Former revisions:
15	! -----------------
16	! $Id: read_var_list.f90 600 2010-11-24 16:10:51Z raasch $
17	!
18	! 591 2010-10-28 06:35:52Z helmke
19	! remove print command
20	!
21	! 587 2010-10-27 08:36:51Z helmke
22	! +time_domask
23	!
24	! 580 2010-10-05 13:59:11Z heinze
25	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
26	! ws_vertical_gradient_level to subs_vertical_gradient_level and
27	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
28	!
29	! 411 2009-12-11 14:15:58Z heinze
30	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
31	! ws_vertical_gradient_level_ind
32	!
33	! 345 2009-07-01 14:37:56Z heinze
34	! +output_for_t0
35	! dt_fixed is read into a dummy variable.
36	! Output of messages replaced by message handling routine.
37	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
38	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
39	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
40	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
41	!
42	! 216 2008-11-25 07:12:43Z raasch
43	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
44	!
45	! 173 2008-05-23 20:39:38Z raasch
46	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
47	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
48	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
49	! recycling_width, turbulent_inflow,
50	! -cross_ts_*, npex, npey,
51	! hom_sum, volume_flow_area, volume_flow_initial moved from
52	! read_3d_binary to here,
53	! routines read_parts_of_var_list and skip_var_list added at the end
54	!
55	! 138 2007-11-28 10:03:58Z letzel
56	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
57	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
58	! plant_canopy, time_sort_particles
59	!
60	! 102 2007-07-27 09:09:17Z raasch
61	! +time_coupling, top_momentumflux_u\|v
62	!
63	! 95 2007-06-02 16:48:38Z raasch
64	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
65	! sa_vertical_gradient_level, bottom/top_salinity_flux
66	!
67	! 87 2007-05-22 15:46:47Z raasch
68	! +max_pr_user (version 3.1), var_hom renamed pr_palm
69	!
70	! 75 2007-03-22 09:54:05Z raasch
71	! +loop_optimization, pt_reference, moisture renamed humidity
72	!
73	! 20 2007-02-26 00:12:32Z raasch
74	! +top_heatflux, use_top_fluxes
75	!
76	! RCS Log replace by Id keyword, revision history cleaned up
77	!
78	! Revision 1.34 2006/08/22 14:14:27 raasch
79	! +dz_max
80	!
81	! Revision 1.1 1998/03/18 20:18:48 raasch
82	! Initial revision
83	!
84	!
85	! Description:
86	! ------------
87	! Reading values of global control variables from restart-file (binary format)
88	!------------------------------------------------------------------------------!
89
90	USE arrays_3d
91	USE averaging
92	USE control_parameters
93	USE grid_variables
94	USE indices
95	USE model_1d
96	USE netcdf_control
97	USE particle_attributes
98	USE pegrid
99	USE profil_parameter
100	USE statistics
101
102	IMPLICIT NONE
103
104	CHARACTER (LEN=10) :: binary_version, version_on_file
105	CHARACTER (LEN=30) :: variable_chr
106
107	LOGICAL :: ldum
108
109
110	CALL check_open( 13 )
111
112	!
113	!-- Make version number check first
114	READ ( 13 ) version_on_file
115	binary_version = '3.5'
116	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
117	WRITE( message_string, * ) 'version mismatch concerning control ', &
118	'variables', &
119	'&version on file = "', &
120	TRIM( version_on_file ), '"', &
121	'&version on program = "', &
122	TRIM( binary_version ), '"'
123	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
124	ENDIF
125
126	!
127	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
128	!-- run
129	READ ( 13 ) variable_chr
130	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
131	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
132	'run on PE ', myid
133	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
134	ENDIF
135	READ ( 13 ) numprocs_previous_run
136
137	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
138	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
139	ENDIF
140
141	READ ( 13 ) variable_chr
142	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
143	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
144	'prior run on PE ', myid
145	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
146	ENDIF
147	READ ( 13 ) hor_index_bounds_previous_run
148
149	!
150	!-- Read vertical number of gridpoints and number of different areas used
151	!-- for computing statistics. Allocate arrays depending on these values,
152	!-- which are needed for the following read instructions.
153	READ ( 13 ) variable_chr
154	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
155	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
156	myid
157	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
158	ENDIF
159	READ ( 13 ) nz
160
161	READ ( 13 ) variable_chr
162	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
163	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
164	'prior run on PE ', myid
165	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
166	ENDIF
167	READ ( 13 ) max_pr_user ! This value is checked against the number of
168	! user profiles given for the current run
169	! in routine user_parin (it has to match)
170
171	READ ( 13 ) variable_chr
172	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
173	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
174	'prior run on PE ', myid
175	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
176	ENDIF
177	READ ( 13 ) statistic_regions
178	IF ( .NOT. ALLOCATED( ug ) ) THEN
179	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
180	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
181	sa_init(0:nz+1), &
182	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
183	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
184	ENDIF
185
186	!
187	!-- Now read all control parameters:
188	!-- Caution: When the following read instructions have been changed, the
189	!-- ------- version number stored in the variable binary_version has to be
190	!-- increased. The same changes must also be done in write_var_list.
191	READ ( 13 ) variable_chr
192	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
193
194	SELECT CASE ( TRIM( variable_chr ) )
195
196	CASE ( 'adjust_mixing_length' )
197	READ ( 13 ) adjust_mixing_length
198	CASE ( 'advected_distance_x' )
199	READ ( 13 ) advected_distance_x
200	CASE ( 'advected_distance_y' )
201	READ ( 13 ) advected_distance_y
202	CASE ( 'alpha_surface' )
203	READ ( 13 ) alpha_surface
204	CASE ( 'average_count_pr' )
205	READ ( 13 ) average_count_pr
206	CASE ( 'average_count_sp' )
207	READ ( 13 ) average_count_sp
208	CASE ( 'average_count_3d' )
209	READ ( 13 ) average_count_3d
210	CASE ( 'bc_e_b' )
211	READ ( 13 ) bc_e_b
212	CASE ( 'bc_lr' )
213	READ ( 13 ) bc_lr
214	CASE ( 'bc_ns' )
215	READ ( 13 ) bc_ns
216	CASE ( 'bc_p_b' )
217	READ ( 13 ) bc_p_b
218	CASE ( 'bc_p_t' )
219	READ ( 13 ) bc_p_t
220	CASE ( 'bc_pt_b' )
221	READ ( 13 ) bc_pt_b
222	CASE ( 'bc_pt_t' )
223	READ ( 13 ) bc_pt_t
224	CASE ( 'bc_pt_t_val' )
225	READ ( 13 ) bc_pt_t_val
226	CASE ( 'bc_q_b' )
227	READ ( 13 ) bc_q_b
228	CASE ( 'bc_q_t' )
229	READ ( 13 ) bc_q_t
230	CASE ( 'bc_q_t_val' )
231	READ ( 13 ) bc_q_t_val
232	CASE ( 'bc_s_b' )
233	READ ( 13 ) bc_s_b
234	CASE ( 'bc_s_t' )
235	READ ( 13 ) bc_s_t
236	CASE ( 'bc_sa_t' )
237	READ ( 13 ) bc_sa_t
238	CASE ( 'bc_uv_b' )
239	READ ( 13 ) bc_uv_b
240	CASE ( 'bc_uv_t' )
241	READ ( 13 ) bc_uv_t
242	CASE ( 'bottom_salinityflux' )
243	READ ( 13 ) bottom_salinityflux
244	CASE ( 'building_height' )
245	READ ( 13 ) building_height
246	CASE ( 'building_length_x' )
247	READ ( 13 ) building_length_x
248	CASE ( 'building_length_y' )
249	READ ( 13 ) building_length_y
250	CASE ( 'building_wall_left' )
251	READ ( 13 ) building_wall_left
252	CASE ( 'building_wall_south' )
253	READ ( 13 ) building_wall_south
254	CASE ( 'call_psolver_at_all_substeps' )
255	READ ( 13 ) call_psolver_at_all_substeps
256	CASE ( 'canopy_mode' )
257	READ ( 13 ) canopy_mode
258	CASE ( 'canyon_height' )
259	READ ( 13 ) canyon_height
260	CASE ( 'canyon_width_x' )
261	READ ( 13 ) canyon_width_x
262	CASE ( 'canyon_width_y' )
263	READ ( 13 ) canyon_width_y
264	CASE ( 'canyon_wall_left' )
265	READ ( 13 ) canyon_wall_left
266	CASE ( 'canyon_wall_south' )
267	READ ( 13 ) canyon_wall_south
268	CASE ( 'cfl_factor' )
269	READ ( 13 ) cfl_factor
270	CASE ( 'cloud_droplets' )
271	READ ( 13 ) cloud_droplets
272	CASE ( 'cloud_physics' )
273	READ ( 13 ) cloud_physics
274	CASE ( 'conserve_volume_flow' )
275	READ ( 13 ) conserve_volume_flow
276	CASE ( 'conserve_volume_flow_mode' )
277	READ ( 13 ) conserve_volume_flow_mode
278	CASE ( 'coupling_start_time' )
279	READ ( 13 ) coupling_start_time
280	CASE ( 'cthf' )
281	READ ( 13 ) cthf
282	CASE ( 'current_timestep_number' )
283	READ ( 13 ) current_timestep_number
284	CASE ( 'cut_spline_overshoot' )
285	READ ( 13 ) cut_spline_overshoot
286	CASE ( 'cycle_mg' )
287	READ ( 13 ) cycle_mg
288	CASE ( 'damp_level_1d' )
289	READ ( 13 ) damp_level_1d
290	CASE ( 'dissipation_1d' )
291	READ ( 13 ) dissipation_1d
292	CASE ( 'dp_external' )
293	READ ( 13 ) dp_external
294	CASE ( 'dp_level_b' )
295	READ ( 13 ) dp_level_b
296	CASE ( 'dp_smooth' )
297	READ ( 13 ) dp_smooth
298	CASE ( 'dpdxy' )
299	READ ( 13 ) dpdxy
300	CASE ( 'drag_coefficient' )
301	READ ( 13 ) drag_coefficient
302	CASE ( 'dt_fixed' )
303	READ ( 13 ) ldum ! restart files created before rev 333
304	! contained dt_fixed by mistake; it is still
305	! read here in order to allow usage of these
306	! older restart files; can be removed in a
307	! later version
308	CASE ( 'dt_pr_1d' )
309	READ ( 13 ) dt_pr_1d
310	CASE ( 'dt_run_control_1d' )
311	READ ( 13 ) dt_run_control_1d
312	CASE ( 'dt_3d' )
313	READ ( 13 ) dt_3d
314	CASE ( 'dvrp_filecount' )
315	READ ( 13 ) dvrp_filecount
316	CASE ( 'dx' )
317	READ ( 13 ) dx
318	CASE ( 'dy' )
319	READ ( 13 ) dy
320	CASE ( 'dz' )
321	READ ( 13 ) dz
322	CASE ( 'dz_max' )
323	READ ( 13 ) dz_max
324	CASE ( 'dz_stretch_factor' )
325	READ ( 13 ) dz_stretch_factor
326	CASE ( 'dz_stretch_level' )
327	READ ( 13 ) dz_stretch_level
328	CASE ( 'e_min' )
329	READ ( 13 ) e_min
330	CASE ( 'end_time_1d' )
331	READ ( 13 ) end_time_1d
332	CASE ( 'fft_method' )
333	READ ( 13 ) fft_method
334	CASE ( 'first_call_advec_particles' )
335	READ ( 13 ) first_call_advec_particles
336	CASE ( 'galilei_transformation' )
337	READ ( 13 ) galilei_transformation
338	CASE ( 'grid_matching' )
339	READ ( 13 ) grid_matching
340	CASE ( 'hom' )
341	READ ( 13 ) hom
342	CASE ( 'hom_sum' )
343	READ ( 13 ) hom_sum
344	CASE ( 'humidity' )
345	READ ( 13 ) humidity
346	CASE ( 'inflow_damping_factor' )
347	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
348	ALLOCATE( inflow_damping_factor(0:nz+1) )
349	ENDIF
350	READ ( 13 ) inflow_damping_factor
351	CASE ( 'inflow_damping_height' )
352	READ ( 13 ) inflow_damping_height
353	CASE ( 'inflow_damping_width' )
354	READ ( 13 ) inflow_damping_width
355	CASE ( 'inflow_disturbance_begin' )
356	READ ( 13 ) inflow_disturbance_begin
357	CASE ( 'inflow_disturbance_end' )
358	READ ( 13 ) inflow_disturbance_end
359	CASE ( 'km_constant' )
360	READ ( 13 ) km_constant
361	CASE ( 'km_damp_max' )
362	READ ( 13 ) km_damp_max
363	CASE ( 'lad' )
364	READ ( 13 ) lad
365	CASE ( 'lad_surface' )
366	READ ( 13 ) lad_surface
367	CASE ( 'lad_vertical_gradient' )
368	READ ( 13 ) lad_vertical_gradient
369	CASE ( 'lad_vertical_gradient_level' )
370	READ ( 13 ) lad_vertical_gradient_level
371	CASE ( 'lad_vertical_gradient_level_in' )
372	READ ( 13 ) lad_vertical_gradient_level_ind
373	CASE ( 'last_dt_change' )
374	READ ( 13 ) last_dt_change
375	CASE ( 'large_scale_subsidence' )
376	READ ( 13 ) large_scale_subsidence
377	CASE ( 'leaf_surface_concentration' )
378	READ ( 13 ) leaf_surface_concentration
379	CASE ( 'long_filter_factor' )
380	READ ( 13 ) long_filter_factor
381	CASE ( 'loop_optimization' )
382	READ ( 13 ) loop_optimization
383	CASE ( 'mean_inflow_profiles' )
384	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
385	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
386	ENDIF
387	READ ( 13 ) mean_inflow_profiles
388	CASE ( 'mg_cycles' )
389	READ ( 13 ) mg_cycles
390	CASE ( 'mg_switch_to_pe0_level' )
391	READ ( 13 ) mg_switch_to_pe0_level
392	CASE ( 'mixing_length_1d' )
393	READ ( 13 ) mixing_length_1d
394	CASE ( 'momentum_advec' )
395	READ ( 13 ) momentum_advec
396	CASE ( 'netcdf_precision' )
397	READ ( 13 ) netcdf_precision
398	CASE ( 'ngsrb' )
399	READ ( 13 ) ngsrb
400	CASE ( 'nsor' )
401	READ ( 13 ) nsor
402	CASE ( 'nsor_ini' )
403	READ ( 13 ) nsor_ini
404	CASE ( 'nx' )
405	READ ( 13 ) nx
406	nx_on_file = nx
407	CASE ( 'ny' )
408	READ ( 13 ) ny
409	ny_on_file = ny
410	CASE ( 'ocean' )
411	READ ( 13 ) ocean
412	CASE ( 'old_dt' )
413	READ ( 13 ) old_dt
414	CASE ( 'omega' )
415	READ ( 13 ) omega
416	CASE ( 'omega_sor' )
417	READ ( 13 ) omega_sor
418	CASE ( 'outflow_damping_width' )
419	READ ( 13 ) outflow_damping_width
420	CASE ( 'output_for_t0' )
421	READ (13) output_for_t0
422	CASE ( 'overshoot_limit_e' )
423	READ ( 13 ) overshoot_limit_e
424	CASE ( 'overshoot_limit_pt' )
425	READ ( 13 ) overshoot_limit_pt
426	CASE ( 'overshoot_limit_u' )
427	READ ( 13 ) overshoot_limit_u
428	CASE ( 'overshoot_limit_v' )
429	READ ( 13 ) overshoot_limit_v
430	CASE ( 'overshoot_limit_w' )
431	READ ( 13 ) overshoot_limit_w
432	CASE ( 'passive_scalar' )
433	READ ( 13 ) passive_scalar
434	CASE ( 'pch_index' )
435	READ ( 13 ) pch_index
436	CASE ( 'phi' )
437	READ ( 13 ) phi
438	CASE ( 'plant_canopy' )
439	READ ( 13 ) plant_canopy
440	CASE ( 'prandtl_layer' )
441	READ ( 13 ) prandtl_layer
442	CASE ( 'prandtl_number' )
443	READ ( 13 ) prandtl_number
444	CASE ( 'precipitation' )
445	READ ( 13 ) precipitation
446	CASE ( 'psolver' )
447	READ ( 13 ) psolver
448	CASE ( 'pt_init' )
449	READ ( 13 ) pt_init
450	CASE ( 'pt_reference' )
451	READ ( 13 ) pt_reference
452	CASE ( 'pt_surface' )
453	READ ( 13 ) pt_surface
454	CASE ( 'pt_surface_initial_change' )
455	READ ( 13 ) pt_surface_initial_change
456	CASE ( 'pt_vertical_gradient' )
457	READ ( 13 ) pt_vertical_gradient
458	CASE ( 'pt_vertical_gradient_level' )
459	READ ( 13 ) pt_vertical_gradient_level
460	CASE ( 'pt_vertical_gradient_level_ind' )
461	READ ( 13 ) pt_vertical_gradient_level_ind
462	CASE ( 'q_init' )
463	READ ( 13 ) q_init
464	CASE ( 'q_surface' )
465	READ ( 13 ) q_surface
466	CASE ( 'q_surface_initial_change' )
467	READ ( 13 ) q_surface_initial_change
468	CASE ( 'q_vertical_gradient' )
469	READ ( 13 ) q_vertical_gradient
470	CASE ( 'q_vertical_gradient_level' )
471	READ ( 13 ) q_vertical_gradient_level
472	CASE ( 'q_vertical_gradient_level_ind' )
473	READ ( 13 ) q_vertical_gradient_level_ind
474	CASE ( 'radiation' )
475	READ ( 13 ) radiation
476	CASE ( 'random_generator' )
477	READ ( 13 ) random_generator
478	CASE ( 'random_heatflux' )
479	READ ( 13 ) random_heatflux
480	CASE ( 'rayleigh_damping_factor' )
481	READ ( 13 ) rayleigh_damping_factor
482	CASE ( 'rayleigh_damping_height' )
483	READ ( 13 ) rayleigh_damping_height
484	CASE ( 'recycling_width' )
485	READ ( 13 ) recycling_width
486	CASE ( 'residual_limit' )
487	READ ( 13 ) residual_limit
488	CASE ( 'rif_max' )
489	READ ( 13 ) rif_max
490	CASE ( 'rif_min' )
491	READ ( 13 ) rif_min
492	CASE ( 'roughness_length' )
493	READ ( 13 ) roughness_length
494	CASE ( 'runnr' )
495	READ ( 13 ) runnr
496	CASE ( 'run_coupled' )
497	READ ( 13 ) run_coupled
498	CASE ( 'sa_init' )
499	READ ( 13 ) sa_init
500	CASE ( 'sa_surface' )
501	READ ( 13 ) sa_surface
502	CASE ( 'sa_vertical_gradient' )
503	READ ( 13 ) sa_vertical_gradient
504	CASE ( 'sa_vertical_gradient_level' )
505	READ ( 13 ) sa_vertical_gradient_level
506	CASE ( 'scalar_advec' )
507	READ ( 13 ) scalar_advec
508	CASE ( 'scalar_exchange_coefficient' )
509	READ ( 13 ) scalar_exchange_coefficient
510	CASE ( 'simulated_time' )
511	READ ( 13 ) simulated_time
512	CASE ( 'surface_heatflux' )
513	READ ( 13 ) surface_heatflux
514	CASE ( 'surface_pressure' )
515	READ ( 13 ) surface_pressure
516	CASE ( 'surface_scalarflux' )
517	READ ( 13 ) surface_scalarflux
518	CASE ( 'surface_waterflux' )
519	READ ( 13 ) surface_waterflux
520	CASE ( 's_surface' )
521	READ ( 13 ) s_surface
522	CASE ( 's_surface_initial_change' )
523	READ ( 13 ) s_surface_initial_change
524	CASE ( 's_vertical_gradient' )
525	READ ( 13 ) s_vertical_gradient
526	CASE ( 's_vertical_gradient_level' )
527	READ ( 13 ) s_vertical_gradient_level
528	CASE ( 'time_coupling' )
529	READ ( 13 ) time_coupling
530	CASE ( 'time_disturb' )
531	READ ( 13 ) time_disturb
532	CASE ( 'time_dopr' )
533	READ ( 13 ) time_dopr
534	CASE ( 'time_domask' )
535	READ ( 13 ) time_domask
536	CASE ( 'time_dopr_av' )
537	READ ( 13 ) time_dopr_av
538	CASE ( 'time_dopr_listing' )
539	READ ( 13 ) time_dopr_listing
540	CASE ( 'time_dopts' )
541	READ ( 13 ) time_dopts
542	CASE ( 'time_dosp' )
543	READ ( 13 ) time_dosp
544	CASE ( 'time_dots' )
545	READ ( 13 ) time_dots
546	CASE ( 'time_do2d_xy' )
547	READ ( 13 ) time_do2d_xy
548	CASE ( 'time_do2d_xz' )
549	READ ( 13 ) time_do2d_xz
550	CASE ( 'time_do2d_yz' )
551	READ ( 13 ) time_do2d_yz
552	CASE ( 'time_do3d' )
553	READ ( 13 ) time_do3d
554	CASE ( 'time_do_av' )
555	READ ( 13 ) time_do_av
556	CASE ( 'time_do_sla' )
557	READ ( 13 ) time_do_sla
558	CASE ( 'time_dvrp' )
559	READ ( 13 ) time_dvrp
560	CASE ( 'time_restart' )
561	READ ( 13 ) time_restart
562	CASE ( 'time_run_control' )
563	READ ( 13 ) time_run_control
564	CASE ( 'time_since_reference_point' )
565	READ ( 13 ) time_since_reference_point
566	CASE ( 'time_sort_particles' )
567	READ ( 13 ) time_sort_particles
568	CASE ( 'timestep_scheme' )
569	READ ( 13 ) timestep_scheme
570	CASE ( 'topography' )
571	READ ( 13 ) topography
572	CASE ( 'topography_grid_convention' )
573	READ ( 13 ) topography_grid_convention
574	CASE ( 'top_heatflux' )
575	READ ( 13 ) top_heatflux
576	CASE ( 'top_momentumflux_u' )
577	READ ( 13 ) top_momentumflux_u
578	CASE ( 'top_momentumflux_v' )
579	READ ( 13 ) top_momentumflux_v
580	CASE ( 'top_salinityflux' )
581	READ ( 13 ) top_salinityflux
582	CASE ( 'tsc' )
583	READ ( 13 ) tsc
584	CASE ( 'turbulent_inflow' )
585	READ ( 13 ) turbulent_inflow
586	CASE ( 'u_bulk' )
587	READ ( 13 ) u_bulk
588	CASE ( 'u_init' )
589	READ ( 13 ) u_init
590	CASE ( 'u_max' )
591	READ ( 13 ) u_max
592	CASE ( 'u_max_ijk' )
593	READ ( 13 ) u_max_ijk
594	CASE ( 'ug' )
595	READ ( 13 ) ug
596	CASE ( 'ug_surface' )
597	READ ( 13 ) ug_surface
598	CASE ( 'ug_vertical_gradient' )
599	READ ( 13 ) ug_vertical_gradient
600	CASE ( 'ug_vertical_gradient_level' )
601	READ ( 13 ) ug_vertical_gradient_level
602	CASE ( 'ug_vertical_gradient_level_ind' )
603	READ ( 13 ) ug_vertical_gradient_level_ind
604	CASE ( 'ups_limit_e' )
605	READ ( 13 ) ups_limit_e
606	CASE ( 'ups_limit_pt' )
607	READ ( 13 ) ups_limit_pt
608	CASE ( 'ups_limit_u' )
609	READ ( 13 ) ups_limit_u
610	CASE ( 'ups_limit_v' )
611	READ ( 13 ) ups_limit_v
612	CASE ( 'ups_limit_w' )
613	READ ( 13 ) ups_limit_w
614	CASE ( 'use_surface_fluxes' )
615	READ ( 13 ) use_surface_fluxes
616	CASE ( 'use_top_fluxes' )
617	READ ( 13 ) use_top_fluxes
618	CASE ( 'use_ug_for_galilei_tr' )
619	READ ( 13 ) use_ug_for_galilei_tr
620	CASE ( 'use_upstream_for_tke' )
621	READ ( 13 ) use_upstream_for_tke
622	CASE ( 'v_bulk' )
623	READ ( 13 ) v_bulk
624	CASE ( 'v_init' )
625	READ ( 13 ) v_init
626	CASE ( 'v_max' )
627	READ ( 13 ) v_max
628	CASE ( 'v_max_ijk' )
629	READ ( 13 ) v_max_ijk
630	CASE ( 'vg' )
631	READ ( 13 ) vg
632	CASE ( 'vg_surface' )
633	READ ( 13 ) vg_surface
634	CASE ( 'vg_vertical_gradient' )
635	READ ( 13 ) vg_vertical_gradient
636	CASE ( 'vg_vertical_gradient_level' )
637	READ ( 13 ) vg_vertical_gradient_level
638	CASE ( 'vg_vertical_gradient_level_ind' )
639	READ ( 13 ) vg_vertical_gradient_level_ind
640	CASE ( 'volume_flow_area' )
641	READ ( 13 ) volume_flow_area
642	CASE ( 'volume_flow_initial' )
643	READ ( 13 ) volume_flow_initial
644	CASE ( 'wall_adjustment' )
645	READ ( 13 ) wall_adjustment
646	CASE ( 'subs_vertical_gradient' )
647	READ ( 13 ) subs_vertical_gradient
648	CASE ( 'subs_vertical_gradient_level' )
649	READ ( 13 ) subs_vertical_gradient_level
650	CASE ( 'subs_vertical_gradient_level_i' )
651	READ ( 13 ) subs_vertical_gradient_level_i
652	CASE ( 'w_max' )
653	READ ( 13 ) w_max
654	CASE ( 'w_max_ijk' )
655	READ ( 13 ) w_max_ijk
656
657	CASE DEFAULT
658	WRITE( message_string, * ) 'unknown variable named "', &
659	TRIM( variable_chr ), '" found in', &
660	' data from prior run on PE ', myid
661	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
662	END SELECT
663	!
664	!-- Read next string
665	READ ( 13 ) variable_chr
666
667	ENDDO
668
669
670	END SUBROUTINE read_var_list
671
672
673
674	SUBROUTINE read_parts_of_var_list
675
676	!------------------------------------------------------------------------------!
677	! Description:
678	! ------------
679	! Skipping the global control variables from restart-file (binary format)
680	! except some informations needed when reading restart data from a previous
681	! run which used a smaller total domain or/and a different domain decomposition.
682	!------------------------------------------------------------------------------!
683
684	USE arrays_3d
685	USE control_parameters
686	USE indices
687	USE pegrid
688	USE statistics
689
690	IMPLICIT NONE
691
692	CHARACTER (LEN=10) :: version_on_file
693	CHARACTER (LEN=30) :: variable_chr
694
695	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
696	statistic_regions_on_file, tmp_mpru, tmp_sr
697
698	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
699	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
700
701
702	CALL check_open( 13 )
703
704	WRITE (9,*) 'rpovl: after check open 13'
705	CALL local_flush( 9 )
706	READ ( 13 ) version_on_file
707
708	!
709	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
710	!-- run
711	READ ( 13 ) variable_chr
712	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
713	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
714	'run on PE ', myid
715	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
716	ENDIF
717	READ ( 13 ) numprocs_previous_run
718
719	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
720	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
721	ENDIF
722
723	READ ( 13 ) variable_chr
724	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
725	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
726	'prior run on PE ', myid
727	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
728	ENDIF
729	READ ( 13 ) hor_index_bounds_previous_run
730
731	!
732	!-- Read vertical number of gridpoints and number of different areas used
733	!-- for computing statistics. Allocate arrays depending on these values,
734	!-- which are needed for the following read instructions.
735	READ ( 13 ) variable_chr
736	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
737	message_string = 'nz not found in restart data file'
738	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
739	ENDIF
740	READ ( 13 ) nz_on_file
741	IF ( nz_on_file /= nz ) THEN
742	WRITE( message_string, * ) 'mismatch concerning number of ', &
743	'gridpoints along z', &
744	'&nz on file = "', nz_on_file, '"', &
745	'&nz from run = "', nz, '"'
746	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
747	ENDIF
748
749	READ ( 13 ) variable_chr
750	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
751	message_string = 'max_pr_user not found in restart data file'
752	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
753	ENDIF
754	READ ( 13 ) max_pr_user_on_file
755	IF ( max_pr_user_on_file /= max_pr_user ) THEN
756	WRITE( message_string, * ) 'number of user profiles on res', &
757	'tart data file differs from the current ', &
758	'run&max_pr_user on file = "', &
759	max_pr_user_on_file, '"', &
760	'&max_pr_user from run = "', &
761	max_pr_user, '"'
762	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
763	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
764	ELSE
765	tmp_mpru = max_pr_user
766	ENDIF
767
768	READ ( 13 ) variable_chr
769	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
770	message_string = 'statistic_regions not found in restart data file'
771	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
772	ENDIF
773	READ ( 13 ) statistic_regions_on_file
774	IF ( statistic_regions_on_file /= statistic_regions ) THEN
775	WRITE( message_string, * ) 'statistic regions on restart data file ',&
776	'differ from the current run', &
777	'&statistic regions on file = "', &
778	statistic_regions_on_file, '"', &
779	'&statistic regions from run = "', &
780	statistic_regions, '"', &
781	'&statistic data may be lost!'
782	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
783	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
784	ELSE
785	tmp_sr = statistic_regions
786	ENDIF
787
788
789	!
790	!-- Now read and check some control parameters and skip the rest
791	WRITE (9,*) 'wpovl: begin reading variables'
792	CALL local_flush( 9 )
793	READ ( 13 ) variable_chr
794
795	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
796
797	SELECT CASE ( TRIM( variable_chr ) )
798
799	CASE ( 'average_count_pr' )
800	READ ( 13 ) average_count_pr
801	IF ( average_count_pr /= 0 ) THEN
802	WRITE( message_string, * ) 'inflow profiles not temporally ', &
803	'averaged. &Averaging will be done now using ', &
804	average_count_pr, ' samples.'
805	CALL message( 'read_parts_of_var_list', 'PA0309', &
806	0, 1, 0, 6, 0 )
807	ENDIF
808
809	CASE ( 'hom' )
810	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
811	0:statistic_regions_on_file) )
812	READ ( 13 ) hom_on_file
813	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
814	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
815	DEALLOCATE( hom_on_file )
816
817	CASE ( 'hom_sum' )
818	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
819	0:statistic_regions_on_file) )
820	READ ( 13 ) hom_sum_on_file
821	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
822	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
823	DEALLOCATE( hom_sum_on_file )
824
825	CASE ( 'nx' )
826	READ ( 13 ) nx_on_file
827
828	CASE ( 'ny' )
829	READ ( 13 ) ny_on_file
830
831
832	CASE DEFAULT
833
834	READ ( 13 ) idum
835
836	END SELECT
837
838	READ ( 13 ) variable_chr
839
840	ENDDO
841
842	!
843	!-- Calculate the temporal average of vertical profiles, if neccessary
844	IF ( average_count_pr /= 0 ) THEN
845	hom_sum = hom_sum / REAL( average_count_pr )
846	ENDIF
847
848
849	END SUBROUTINE read_parts_of_var_list
850
851
852
853	SUBROUTINE skip_var_list
854
855	!------------------------------------------------------------------------------!
856	! Description:
857	! ------------
858	! Skipping the global control variables from restart-file (binary format)
859	!------------------------------------------------------------------------------!
860
861	IMPLICIT NONE
862
863	CHARACTER (LEN=10) :: version_on_file
864	CHARACTER (LEN=30) :: variable_chr
865
866	CHARACTER (LEN=1) :: cdum
867
868
869	WRITE (9,*) 'skipvl #1'
870	CALL local_flush( 9 )
871	READ ( 13 ) version_on_file
872
873	WRITE (9,*) 'skipvl before variable_chr'
874	CALL local_flush( 9 )
875	READ ( 13 ) variable_chr
876	WRITE (9,*) 'skipvl after variable_chr'
877	CALL local_flush( 9 )
878
879	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
880
881	WRITE (9,*) 'skipvl chr = ', variable_chr
882	CALL local_flush( 9 )
883	READ ( 13 ) cdum
884	READ ( 13 ) variable_chr
885
886	ENDDO
887	WRITE (9,*) 'skipvl last'
888	CALL local_flush( 9 )
889
890
891	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 600

Download in other formats: