Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2809

Last change on this file since 2809 was 2776, checked in by Giersch, 7 years ago
Skipping of module related restart data changed + adapting synthetic turbulence generator to current restart procedure
Property svn:keywords set to `Id`
File size: 41.7 KB

Line
1	!> @file read_var_list.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2018 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: read_var_list.f90 2776 2018-01-31 10:44:42Z schwenkel $
27	! Change skip_var_list: Skipping of module related parameter is only necessary
28	! if restart data was outputted at the end of the precursor run
29	!
30	! 2718 2018-01-02 08:49:38Z maronga
31	! Corrected "Former revisions" section
32	!
33	! 2696 2017-12-14 17:12:51Z kanani
34	! Change in file header (GPL part)
35	! + rans_mode, turbulence_closure (TG)
36	!
37	! 2576 2017-10-24 13:49:46Z Giersch
38	! * end * marks the end of the standard parameter list of restart files
39	! like it was before revision 2563. To skip also the variables of the modules
40	! wind_turbine_model_mod, flight_mod and synthetic_turbulence_generator_mod
41	! three new functions has to be defined which are called in skip_var_list.
42	! Adapted binary version number
43	!
44	! 2575 2017-10-24 09:57:58Z maronga
45	! Renamed phi -> latitude, added longitude
46	!
47	! 2563 2017-10-19 15:36:10Z Giersch
48	! CALL stg_read_restart_data moved to synthetic_turbulence_generator_mod and
49	! CALL flight_read_restart_data moved to virtual_flights_mod. Furthermore
50	! * end default * marks the end of the standard parameter list of restart
51	! files and * end * marks the end of all parameter including module
52	! parameter. Therefore the call of flight_skip_var_list becomes unnecessary.
53	!
54	! 2372 2017-08-25 12:37:32Z sward
55	! y_shift added to vars, version no. increased
56	!
57	! 2365 2017-08-21 14:59:59Z kanani
58	! Vertical grid nesting implemented (SadiqHuq)
59	!
60	! 2339 2017-08-07 13:55:26Z gronemeier
61	! corrected timestamp in header
62	!
63	! 2338 2017-08-07 12:15:38Z gronemeier
64	! Modularize 1D model
65	!
66	! 2320 2017-07-21 12:47:43Z suehring
67	! Formatting adjustment
68	!
69	! 2265 2017-06-08 16:58:28Z schwenkel
70	! Unused variables removed.
71	!
72	! 2259 2017-06-08 09:09:11Z gronemeier
73	! Implemented synthetic turbulence generator
74	!
75	! 2233 2017-05-30 18:08:54Z suehring
76	!
77	! 2232 2017-05-30 17:47:52Z suehring
78	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
79	! wall_salinityflux
80	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
81	! tunnel_wall_depth
82	!
83	! 2042 2016-11-02 13:47:31Z suehring
84	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
85	!
86	! 2000 2016-08-20 18:09:15Z knoop
87	! Forced header and separation lines into 80 columns
88	!
89	! 1992 2016-08-12 15:14:59Z suehring
90	! top_scalarflux added
91	!
92	! 1960 2016-07-12 16:34:24Z suehring
93	! Separate humidity and passive scalar
94	! Remove unused variables from ONLY list
95	!
96	! 1957 2016-07-07 10:43:48Z suehring
97	! flight module added
98	!
99	! 1849 2016-04-08 11:33:18Z hoffmann
100	! Adapted for modularization of microphysics
101	!
102	! 1833 2016-04-07 14:23:03Z raasch
103	! spectra_mod added
104	!
105	! 1831 2016-04-07 13:15:51Z hoffmann
106	! turbulence renamed collision_turbulence, drizzle renamed
107	! cloud_water_sedimentation
108	!
109	! 1808 2016-04-05 19:44:00Z raasch
110	! test output removed
111	!
112	! 1783 2016-03-06 18:36:17Z raasch
113	! netcdf module name changed + related changes
114	!
115	! 1699 2015-10-29 08:02:35Z maronga
116	! Bugfix: update of binary version from 3.9b to 4.0 was missing
117	!
118	! 1691 2015-10-26 16:17:44Z maronga
119	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
120	! output of prandtl_layer and rif_min, rif_max.
121	!
122	! 1682 2015-10-07 23:56:08Z knoop
123	! Code annotations made doxygen readable
124	!
125	! 1615 2015-07-08 18:49:19Z suehring
126	! Enable turbulent inflow for passive_scalar and humidity
127	!
128	! 1585 2015-04-30 07:05:52Z maronga
129	! Adapted for RRTMG
130	!
131	! 1560 2015-03-06 10:48:54Z keck
132	! +recycling_yshift
133	!
134	! 1522 2015-01-14 10:53:12Z keck
135	! added query for checking if the advection scheme in the restart run is the
136	! same as the advection scheme in the corresponding initial run
137	!
138	! 1502 2014-12-03 18:22:31Z kanani
139	! Canopy module and parameters removed (parameters are always read from
140	! canopy_par NAMELIST for initial and restart runs)
141	!
142	! 1496 2014-12-02 17:25:50Z maronga
143	! Renamed "radiation" -> "cloud_top_radiation"
144	!
145	! 1484 2014-10-21 10:53:05Z kanani
146	! Changes in the course of the canopy-model modularization:
147	! parameters alpha_lad, beta_lad, lai_beta added,
148	! module plant_canopy_model_mod added,
149	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
150	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
151	!
152	! 1322 2014-03-20 16:38:49Z raasch
153	! REAL functions provided with KIND-attribute
154	!
155	! 1320 2014-03-20 08:40:49Z raasch
156	! ONLY-attribute added to USE-statements,
157	! kind-parameters added to all INTEGER and REAL declaration statements,
158	! kinds are defined in new module kinds,
159	! old module precision_kind is removed,
160	! revision history before 2012 removed,
161	! comment fields (!:) to be used for variable explanations added to
162	! all variable declaration statements
163	!
164	! 1308 2014-03-13 14:58:42Z fricke
165	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
166	! +do3d_time_count
167	!
168	! 1253 2013-11-07 10:48:12Z fricke
169	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
170	! is zero for initializing_actions = 'cyclic_fill'
171	!
172	! 1241 2013-10-30 11:36:58Z heinze
173	! +nudging
174	! +large_scale_forcing
175	!
176	! 1195 2013-07-01 12:27:57Z heinze
177	! Bugfix: allocate ref_state
178	!
179	! 1179 2013-06-14 05:57:58Z raasch
180	! +ref_state
181	!
182	! 1115 2013-03-26 18:16:16Z hoffmann
183	! unused variables removed
184	!
185	! 1092 2013-02-02 11:24:22Z raasch
186	! unused variables removed
187	!
188	! 1065 2012-11-22 17:42:36Z hoffmann
189	! +nc, c_sedimentation, limiter_sedimentation, turbulence
190	! -mu_constant, mu_constant_value
191	!
192	! 1053 2012-11-13 17:11:03Z hoffmann
193	! necessary expansions according to the two new prognostic equations (nr, qr)
194	! of the two-moment cloud physics scheme:
195	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
196	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
197	! +surface_waterflux_*
198	!
199	! in addition, steering parameters parameters of the two-moment cloud physics
200	! scheme:
201	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
202	!
203	! 1036 2012-10-22 13:43:42Z raasch
204	! code put under GPL (PALM 3.9)
205	!
206	! 1015 2012-09-27 09:23:24Z raasch
207	! -adjust_mixing_length
208	!
209	! 1003 2012-09-14 14:35:53Z raasch
210	! -grid_matching
211	!
212	! 1001 2012-09-13 14:08:46Z raasch
213	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
214	! overshoot_limit_, ups_limit_
215	!
216	! 978 2012-08-09 08:28:32Z fricke
217	! -km_damp_max, outflow_damping_width
218	! +pt_damping_factor, pt_damping_width
219	! +z0h_factor
220	!
221	! 940 2012-07-09 14:31:00Z raasch
222	! +neutral
223	!
224	! 927 2012-06-06 19:15:04Z raasch
225	! +masking_method
226	!
227	! 849 2012-03-15 10:35:09Z raasch
228	! first_call_advec_particles renamed first_call_lpm
229	!
230	! 824 2012-02-17 09:09:57Z raasch
231	! +curvature_solution_effects
232	!
233	! Revision 1.1 1998/03/18 20:18:48 raasch
234	! Initial revision
235	!
236	!
237	! Description:
238	! ------------
239	!> Reading values of global control variables from restart-file (binary format)
240	!------------------------------------------------------------------------------!
241	SUBROUTINE read_var_list
242
243
244	USE arrays_3d, &
245	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
246	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
247
248	USE control_parameters
249
250	USE grid_variables, &
251	ONLY: dx, dy
252
253	USE indices, &
254	ONLY: nz, nx, nx_on_file, ny, ny_on_file
255
256	USE microphysics_mod, &
257	ONLY: c_sedimentation, collision_turbulence, &
258	cloud_water_sedimentation, limiter_sedimentation, &
259	nc_const, ventilation_effect
260
261	USE model_1d_mod, &
262	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
263
264	USE netcdf_interface, &
265	ONLY: netcdf_precision, output_for_t0
266
267	USE particle_attributes, &
268	ONLY: curvature_solution_effects
269
270	USE pegrid
271
272	USE radiation_model_mod, &
273	ONLY: time_radiation
274
275	USE spectra_mod, &
276	ONLY: average_count_sp
277
278	USE statistics, &
279	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
280	v_max, v_max_ijk, w_max, w_max_ijk
281
282	USE vertical_nesting_mod, &
283	ONLY: vnest_init
284
285	IMPLICIT NONE
286
287	CHARACTER (LEN=10) :: binary_version, version_on_file
288	CHARACTER (LEN=30) :: variable_chr
289
290
291	CALL check_open( 13 )
292
293	!
294	!-- Make version number check first
295	READ ( 13 ) version_on_file
296	binary_version = '4.5'
297	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
298	WRITE( message_string, * ) 'version mismatch concerning control ', &
299	'variables', &
300	'&version on file = "', &
301	TRIM( version_on_file ), '"', &
302	'&version on program = "', &
303	TRIM( binary_version ), '"'
304	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
305	ENDIF
306
307	!
308	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
309	!-- run
310	READ ( 13 ) variable_chr
311	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
312	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
313	'run on PE ', myid
314	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
315	ENDIF
316	READ ( 13 ) numprocs_previous_run
317
318	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
319	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
320	ENDIF
321
322	READ ( 13 ) variable_chr
323	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
324	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
325	'prior run on PE ', myid
326	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
327	ENDIF
328	READ ( 13 ) hor_index_bounds_previous_run
329
330	!
331	!-- Read vertical number of gridpoints and number of different areas used
332	!-- for computing statistics. Allocate arrays depending on these values,
333	!-- which are needed for the following read instructions.
334	READ ( 13 ) variable_chr
335	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
336	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
337	myid
338	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
339	ENDIF
340	READ ( 13 ) nz
341
342	READ ( 13 ) variable_chr
343	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
344	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
345	'prior run on PE ', myid
346	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
347	ENDIF
348	READ ( 13 ) max_pr_user ! This value is checked against the number of
349	! user profiles given for the current run
350	! in routine user_parin (it has to match)
351
352	READ ( 13 ) variable_chr
353	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
354	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
355	'prior run on PE ', myid
356	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
357	ENDIF
358	READ ( 13 ) statistic_regions
359	IF ( .NOT. ALLOCATED( ug ) ) THEN
360	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
361	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
362	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
363	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
364	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
365	ENDIF
366
367	!
368	!-- Now read all control parameters:
369	!-- Caution: When the following read instructions have been changed, the
370	!-- ------- version number stored in the variable binary_version has to be
371	!-- increased. The same changes must also be done in write_var_list.
372	READ ( 13 ) variable_chr
373	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
374
375	SELECT CASE ( TRIM( variable_chr ) )
376
377	CASE ( 'advected_distance_x' )
378	READ ( 13 ) advected_distance_x
379	CASE ( 'advected_distance_y' )
380	READ ( 13 ) advected_distance_y
381	CASE ( 'alpha_surface' )
382	READ ( 13 ) alpha_surface
383	CASE ( 'average_count_pr' )
384	READ ( 13 ) average_count_pr
385	CASE ( 'average_count_sp' )
386	READ ( 13 ) average_count_sp
387	CASE ( 'average_count_3d' )
388	READ ( 13 ) average_count_3d
389	CASE ( 'bc_e_b' )
390	READ ( 13 ) bc_e_b
391	CASE ( 'bc_lr' )
392	READ ( 13 ) bc_lr
393	CASE ( 'bc_ns' )
394	READ ( 13 ) bc_ns
395	CASE ( 'bc_p_b' )
396	READ ( 13 ) bc_p_b
397	CASE ( 'bc_p_t' )
398	READ ( 13 ) bc_p_t
399	CASE ( 'bc_pt_b' )
400	READ ( 13 ) bc_pt_b
401	CASE ( 'bc_pt_t' )
402	READ ( 13 ) bc_pt_t
403	CASE ( 'bc_pt_t_val' )
404	READ ( 13 ) bc_pt_t_val
405	CASE ( 'bc_q_b' )
406	READ ( 13 ) bc_q_b
407	CASE ( 'bc_q_t' )
408	READ ( 13 ) bc_q_t
409	CASE ( 'bc_q_t_val' )
410	READ ( 13 ) bc_q_t_val
411	CASE ( 'bc_s_b' )
412	READ ( 13 ) bc_s_b
413	CASE ( 'bc_s_t' )
414	READ ( 13 ) bc_s_t
415	CASE ( 'bc_sa_t' )
416	READ ( 13 ) bc_sa_t
417	CASE ( 'bc_uv_b' )
418	READ ( 13 ) bc_uv_b
419	CASE ( 'bc_uv_t' )
420	READ ( 13 ) bc_uv_t
421	CASE ( 'bottom_salinityflux' )
422	READ ( 13 ) bottom_salinityflux
423	CASE ( 'building_height' )
424	READ ( 13 ) building_height
425	CASE ( 'building_length_x' )
426	READ ( 13 ) building_length_x
427	CASE ( 'building_length_y' )
428	READ ( 13 ) building_length_y
429	CASE ( 'building_wall_left' )
430	READ ( 13 ) building_wall_left
431	CASE ( 'building_wall_south' )
432	READ ( 13 ) building_wall_south
433	CASE ( 'call_psolver_at_all_substeps' )
434	READ ( 13 ) call_psolver_at_all_substeps
435	CASE ( 'canyon_height' )
436	READ ( 13 ) canyon_height
437	CASE ( 'canyon_width_x' )
438	READ ( 13 ) canyon_width_x
439	CASE ( 'canyon_width_y' )
440	READ ( 13 ) canyon_width_y
441	CASE ( 'canyon_wall_left' )
442	READ ( 13 ) canyon_wall_left
443	CASE ( 'canyon_wall_south' )
444	READ ( 13 ) canyon_wall_south
445	CASE ( 'c_sedimentation' )
446	READ ( 13 ) c_sedimentation
447	CASE ( 'cfl_factor' )
448	READ ( 13 ) cfl_factor
449	CASE ( 'cloud_droplets' )
450	READ ( 13 ) cloud_droplets
451	CASE ( 'cloud_physics' )
452	READ ( 13 ) cloud_physics
453	CASE ( 'cloud_scheme' )
454	READ ( 13 ) cloud_scheme
455	CASE ( 'collective_wait' )
456	READ ( 13 ) collective_wait
457	CASE ( 'conserve_volume_flow' )
458	READ ( 13 ) conserve_volume_flow
459	CASE ( 'conserve_volume_flow_mode' )
460	READ ( 13 ) conserve_volume_flow_mode
461	CASE ( 'constant_flux_layer' )
462	READ ( 13 ) constant_flux_layer
463	CASE ( 'coupling_start_time' )
464	READ ( 13 ) coupling_start_time
465	CASE ( 'current_timestep_number' )
466	READ ( 13 ) current_timestep_number
467	CASE ( 'curvature_solution_effects' )
468	READ ( 13 ) curvature_solution_effects
469	CASE ( 'cycle_mg' )
470	READ ( 13 ) cycle_mg
471	CASE ( 'damp_level_1d' )
472	READ ( 13 ) damp_level_1d
473	CASE ( 'dissipation_1d' )
474	READ ( 13 ) dissipation_1d
475	CASE ( 'do2d_xy_time_count' )
476	READ ( 13 ) do2d_xy_time_count
477	CASE ( 'do2d_xz_time_count' )
478	READ ( 13 ) do2d_xz_time_count
479	CASE ( 'do2d_yz_time_count' )
480	READ ( 13 ) do2d_yz_time_count
481	CASE ( 'do3d_time_count' )
482	READ ( 13 ) do3d_time_count
483	CASE ( 'dp_external' )
484	READ ( 13 ) dp_external
485	CASE ( 'dp_level_b' )
486	READ ( 13 ) dp_level_b
487	CASE ( 'dp_smooth' )
488	READ ( 13 ) dp_smooth
489	CASE ( 'dpdxy' )
490	READ ( 13 ) dpdxy
491	CASE ( 'cloud_water_sedimentation' )
492	READ ( 13 ) cloud_water_sedimentation
493	CASE ( 'dt_pr_1d' )
494	READ ( 13 ) dt_pr_1d
495	CASE ( 'dt_run_control_1d' )
496	READ ( 13 ) dt_run_control_1d
497	CASE ( 'dt_3d' )
498	READ ( 13 ) dt_3d
499	CASE ( 'dvrp_filecount' )
500	READ ( 13 ) dvrp_filecount
501	CASE ( 'dx' )
502	READ ( 13 ) dx
503	CASE ( 'dy' )
504	READ ( 13 ) dy
505	CASE ( 'dz' )
506	READ ( 13 ) dz
507	CASE ( 'dz_max' )
508	READ ( 13 ) dz_max
509	CASE ( 'dz_stretch_factor' )
510	READ ( 13 ) dz_stretch_factor
511	CASE ( 'dz_stretch_level' )
512	READ ( 13 ) dz_stretch_level
513	CASE ( 'e_min' )
514	READ ( 13 ) e_min
515	CASE ( 'end_time_1d' )
516	READ ( 13 ) end_time_1d
517	CASE ( 'fft_method' )
518	READ ( 13 ) fft_method
519	CASE ( 'first_call_lpm' )
520	READ ( 13 ) first_call_lpm
521	CASE ( 'galilei_transformation' )
522	READ ( 13 ) galilei_transformation
523	CASE ( 'hom' )
524	READ ( 13 ) hom
525	CASE ( 'hom_sum' )
526	READ ( 13 ) hom_sum
527	CASE ( 'humidity' )
528	READ ( 13 ) humidity
529	CASE ( 'inflow_damping_factor' )
530	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
531	ALLOCATE( inflow_damping_factor(0:nz+1) )
532	ENDIF
533	READ ( 13 ) inflow_damping_factor
534	CASE ( 'inflow_damping_height' )
535	READ ( 13 ) inflow_damping_height
536	CASE ( 'inflow_damping_width' )
537	READ ( 13 ) inflow_damping_width
538	CASE ( 'inflow_disturbance_begin' )
539	READ ( 13 ) inflow_disturbance_begin
540	CASE ( 'inflow_disturbance_end' )
541	READ ( 13 ) inflow_disturbance_end
542	CASE ( 'km_constant' )
543	READ ( 13 ) km_constant
544	CASE ( 'large_scale_forcing' )
545	READ ( 13 ) large_scale_forcing
546	CASE ( 'large_scale_subsidence' )
547	READ ( 13 ) large_scale_subsidence
548	CASE ( 'limiter_sedimentation' )
549	READ ( 13 ) limiter_sedimentation
550	CASE ( 'loop_optimization' )
551	READ ( 13 ) loop_optimization
552	CASE ( 'masking_method' )
553	READ ( 13 ) masking_method
554	CASE ( 'mean_inflow_profiles' )
555	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
556	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
557	ENDIF
558	READ ( 13 ) mean_inflow_profiles
559	CASE ( 'mg_cycles' )
560	READ ( 13 ) mg_cycles
561	CASE ( 'mg_switch_to_pe0_level' )
562	READ ( 13 ) mg_switch_to_pe0_level
563	CASE ( 'mixing_length_1d' )
564	READ ( 13 ) mixing_length_1d
565	CASE ( 'momentum_advec' )
566	READ ( 13 ) momentum_advec
567	CASE ( 'most_method' )
568	READ ( 13 ) most_method
569	CASE ( 'nc_const' )
570	READ ( 13 ) nc_const
571	CASE ( 'netcdf_precision' )
572	READ ( 13 ) netcdf_precision
573	CASE ( 'neutral' )
574	READ ( 13 ) neutral
575	CASE ( 'ngsrb' )
576	READ ( 13 ) ngsrb
577	CASE ( 'nsor' )
578	READ ( 13 ) nsor
579	CASE ( 'nsor_ini' )
580	READ ( 13 ) nsor_ini
581	CASE ( 'nudging' )
582	READ ( 13 ) nudging
583	CASE ( 'num_leg' )
584	READ ( 13 ) num_leg
585	CASE ( 'nx' )
586	READ ( 13 ) nx
587	nx_on_file = nx
588	CASE ( 'ny' )
589	READ ( 13 ) ny
590	ny_on_file = ny
591	CASE ( 'ocean' )
592	READ ( 13 ) ocean
593	CASE ( 'old_dt' )
594	READ ( 13 ) old_dt
595	CASE ( 'omega' )
596	READ ( 13 ) omega
597	CASE ( 'omega_sor' )
598	READ ( 13 ) omega_sor
599	CASE ( 'output_for_t0' )
600	READ (13) output_for_t0
601	CASE ( 'passive_scalar' )
602	READ ( 13 ) passive_scalar
603	CASE ( 'latitude' )
604	READ ( 13 ) latitude
605	CASE ( 'longitude' )
606	READ ( 13 ) longitude
607	CASE ( 'prandtl_number' )
608	READ ( 13 ) prandtl_number
609	CASE ( 'precipitation' )
610	READ ( 13 ) precipitation
611	CASE ( 'psolver' )
612	READ ( 13 ) psolver
613	CASE ( 'pt_damping_factor' )
614	READ ( 13 ) pt_damping_factor
615	CASE ( 'pt_damping_width' )
616	READ ( 13 ) pt_damping_width
617	CASE ( 'pt_init' )
618	READ ( 13 ) pt_init
619	CASE ( 'pt_reference' )
620	READ ( 13 ) pt_reference
621	CASE ( 'pt_surface' )
622	READ ( 13 ) pt_surface
623	CASE ( 'pt_surface_initial_change' )
624	READ ( 13 ) pt_surface_initial_change
625	CASE ( 'pt_vertical_gradient' )
626	READ ( 13 ) pt_vertical_gradient
627	CASE ( 'pt_vertical_gradient_level' )
628	READ ( 13 ) pt_vertical_gradient_level
629	CASE ( 'pt_vertical_gradient_level_ind' )
630	READ ( 13 ) pt_vertical_gradient_level_ind
631	CASE ( 'q_init' )
632	READ ( 13 ) q_init
633	CASE ( 'q_surface' )
634	READ ( 13 ) q_surface
635	CASE ( 'q_surface_initial_change' )
636	READ ( 13 ) q_surface_initial_change
637	CASE ( 'q_vertical_gradient' )
638	READ ( 13 ) q_vertical_gradient
639	CASE ( 'q_vertical_gradient_level' )
640	READ ( 13 ) q_vertical_gradient_level
641	CASE ( 'q_vertical_gradient_level_ind' )
642	READ ( 13 ) q_vertical_gradient_level_ind
643	CASE ( 'cloud_top_radiation' )
644	READ ( 13 ) cloud_top_radiation
645	CASE ( 'random_generator' )
646	READ ( 13 ) random_generator
647	CASE ( 'random_heatflux' )
648	READ ( 13 ) random_heatflux
649	CASE ( 'rans_mode' )
650	READ ( 13 ) rans_mode
651	CASE ( 'rayleigh_damping_factor' )
652	READ ( 13 ) rayleigh_damping_factor
653	CASE ( 'rayleigh_damping_height' )
654	READ ( 13 ) rayleigh_damping_height
655	CASE ( 'recycling_width' )
656	READ ( 13 ) recycling_width
657	CASE ( 'recycling_yshift' )
658	READ ( 13 ) recycling_yshift
659	CASE ( 'reference_state' )
660	READ ( 13 ) reference_state
661	CASE ( 'ref_state' )
662	READ ( 13 ) ref_state
663	CASE ( 'residual_limit' )
664	READ ( 13 ) residual_limit
665	CASE ( 'roughness_length' )
666	READ ( 13 ) roughness_length
667	CASE ( 'runnr' )
668	READ ( 13 ) runnr
669	CASE ( 'run_coupled' )
670	READ ( 13 ) run_coupled
671	CASE ( 's_init' )
672	READ ( 13 ) s_init
673	CASE ( 's_surface' )
674	READ ( 13 ) s_surface
675	CASE ( 's_surface_initial_change' )
676	READ ( 13 ) s_surface_initial_change
677	CASE ( 's_vertical_gradient' )
678	READ ( 13 ) s_vertical_gradient
679	CASE ( 's_vertical_gradient_level' )
680	READ ( 13 ) s_vertical_gradient_level
681	CASE ( 's_vertical_gradient_level_ind' )
682	READ ( 13 ) s_vertical_gradient_level_ind
683	CASE ( 'sa_init' )
684	READ ( 13 ) sa_init
685	CASE ( 'sa_surface' )
686	READ ( 13 ) sa_surface
687	CASE ( 'sa_vertical_gradient' )
688	READ ( 13 ) sa_vertical_gradient
689	CASE ( 'sa_vertical_gradient_level' )
690	READ ( 13 ) sa_vertical_gradient_level
691	CASE ( 'scalar_advec' )
692	READ ( 13 ) scalar_advec
693	CASE ( 'simulated_time' )
694	READ ( 13 ) simulated_time
695	CASE ( 'surface_heatflux' )
696	READ ( 13 ) surface_heatflux
697	CASE ( 'surface_pressure' )
698	READ ( 13 ) surface_pressure
699	CASE ( 'surface_scalarflux' )
700	READ ( 13 ) surface_scalarflux
701	CASE ( 'surface_waterflux' )
702	READ ( 13 ) surface_waterflux
703	CASE ( 'time_coupling' )
704	READ ( 13 ) time_coupling
705	CASE ( 'time_disturb' )
706	READ ( 13 ) time_disturb
707	CASE ( 'time_dopr' )
708	READ ( 13 ) time_dopr
709	CASE ( 'time_domask' )
710	READ ( 13 ) time_domask
711	CASE ( 'time_dopr_av' )
712	READ ( 13 ) time_dopr_av
713	CASE ( 'time_dopr_listing' )
714	READ ( 13 ) time_dopr_listing
715	CASE ( 'time_dopts' )
716	READ ( 13 ) time_dopts
717	CASE ( 'time_dosp' )
718	READ ( 13 ) time_dosp
719	CASE ( 'time_dots' )
720	READ ( 13 ) time_dots
721	CASE ( 'time_do2d_xy' )
722	READ ( 13 ) time_do2d_xy
723	CASE ( 'time_do2d_xz' )
724	READ ( 13 ) time_do2d_xz
725	CASE ( 'time_do2d_yz' )
726	READ ( 13 ) time_do2d_yz
727	CASE ( 'time_do3d' )
728	READ ( 13 ) time_do3d
729	CASE ( 'time_do_av' )
730	READ ( 13 ) time_do_av
731	CASE ( 'time_do_sla' )
732	READ ( 13 ) time_do_sla
733	CASE ( 'time_dvrp' )
734	READ ( 13 ) time_dvrp
735	CASE ( 'time_radiation' )
736	READ ( 13 ) time_radiation
737	CASE ( 'time_restart' )
738	READ ( 13 ) time_restart
739	CASE ( 'time_run_control' )
740	READ ( 13 ) time_run_control
741	CASE ( 'time_since_reference_point' )
742	READ ( 13 ) time_since_reference_point
743	CASE ( 'timestep_scheme' )
744	READ ( 13 ) timestep_scheme
745	CASE ( 'topography' )
746	READ ( 13 ) topography
747	CASE ( 'topography_grid_convention' )
748	READ ( 13 ) topography_grid_convention
749	CASE ( 'top_heatflux' )
750	READ ( 13 ) top_heatflux
751	CASE ( 'top_momentumflux_u' )
752	READ ( 13 ) top_momentumflux_u
753	CASE ( 'top_momentumflux_v' )
754	READ ( 13 ) top_momentumflux_v
755	CASE ( 'top_salinityflux' )
756	READ ( 13 ) top_salinityflux
757	CASE ( 'top_scalarflux' )
758	READ ( 13 ) top_scalarflux
759	CASE ( 'tsc' )
760	READ ( 13 ) tsc
761	CASE ( 'collision_turbulence' )
762	READ ( 13 ) collision_turbulence
763	CASE ( 'tunnel_height' )
764	READ ( 13 ) tunnel_height
765	CASE ( 'tunnel_length' )
766	READ ( 13 ) tunnel_length
767	CASE ( 'tunnel_width_x' )
768	READ ( 13 ) tunnel_width_x
769	CASE ( 'tunnel_width_y' )
770	READ ( 13 ) tunnel_width_y
771	CASE ( 'tunnel_wall_depth' )
772	READ ( 13 ) tunnel_wall_depth
773	CASE ( 'turbulence_closure' )
774	READ ( 13 ) turbulence_closure
775	CASE ( 'turbulent_inflow' )
776	READ ( 13 ) turbulent_inflow
777	CASE ( 'u_bulk' )
778	READ ( 13 ) u_bulk
779	CASE ( 'u_init' )
780	READ ( 13 ) u_init
781	CASE ( 'u_max' )
782	READ ( 13 ) u_max
783	CASE ( 'u_max_ijk' )
784	READ ( 13 ) u_max_ijk
785	CASE ( 'ug' )
786	READ ( 13 ) ug
787	CASE ( 'ug_surface' )
788	READ ( 13 ) ug_surface
789	CASE ( 'ug_vertical_gradient' )
790	READ ( 13 ) ug_vertical_gradient
791	CASE ( 'ug_vertical_gradient_level' )
792	READ ( 13 ) ug_vertical_gradient_level
793	CASE ( 'ug_vertical_gradient_level_ind' )
794	READ ( 13 ) ug_vertical_gradient_level_ind
795	CASE ( 'use_surface_fluxes' )
796	READ ( 13 ) use_surface_fluxes
797	CASE ( 'use_top_fluxes' )
798	READ ( 13 ) use_top_fluxes
799	CASE ( 'use_ug_for_galilei_tr' )
800	READ ( 13 ) use_ug_for_galilei_tr
801	CASE ( 'use_upstream_for_tke' )
802	READ ( 13 ) use_upstream_for_tke
803	CASE ( 'v_bulk' )
804	READ ( 13 ) v_bulk
805	CASE ( 'v_init' )
806	READ ( 13 ) v_init
807	CASE ( 'v_max' )
808	READ ( 13 ) v_max
809	CASE ( 'v_max_ijk' )
810	READ ( 13 ) v_max_ijk
811	CASE ( 'ventilation_effect' )
812	READ ( 13 ) ventilation_effect
813	CASE ( 'vg' )
814	READ ( 13 ) vg
815	CASE ( 'vg_surface' )
816	READ ( 13 ) vg_surface
817	CASE ( 'vg_vertical_gradient' )
818	READ ( 13 ) vg_vertical_gradient
819	CASE ( 'vg_vertical_gradient_level' )
820	READ ( 13 ) vg_vertical_gradient_level
821	CASE ( 'vg_vertical_gradient_level_ind' )
822	READ ( 13 ) vg_vertical_gradient_level_ind
823	CASE ( 'virtual_flight' )
824	READ ( 13 ) virtual_flight
825	CASE ( 'vnest_init' )
826	READ ( 13 ) vnest_init
827	CASE ( 'volume_flow_area' )
828	READ ( 13 ) volume_flow_area
829	CASE ( 'volume_flow_initial' )
830	READ ( 13 ) volume_flow_initial
831	CASE ( 'wall_adjustment' )
832	READ ( 13 ) wall_adjustment
833	CASE ( 'subs_vertical_gradient' )
834	READ ( 13 ) subs_vertical_gradient
835	CASE ( 'subs_vertical_gradient_level' )
836	READ ( 13 ) subs_vertical_gradient_level
837	CASE ( 'subs_vertical_gradient_level_i' )
838	READ ( 13 ) subs_vertical_gradient_level_i
839	CASE ( 'wall_heatflux' )
840	READ ( 13 ) wall_heatflux
841	CASE ( 'wall_humidityflux' )
842	READ ( 13 ) wall_humidityflux
843	CASE ( 'wall_scalarflux' )
844	READ ( 13 ) wall_scalarflux
845	CASE ( 'wall_salinityflux' )
846	READ ( 13 ) wall_salinityflux
847	CASE ( 'w_max' )
848	READ ( 13 ) w_max
849	CASE ( 'w_max_ijk' )
850	READ ( 13 ) w_max_ijk
851	CASE ( 'y_shift' )
852	READ ( 13 ) y_shift
853	CASE ( 'zeta_max' )
854	READ ( 13 ) zeta_max
855	CASE ( 'zeta_min' )
856	READ ( 13 ) zeta_min
857	CASE ( 'z0h_factor' )
858	READ ( 13 ) z0h_factor
859
860	CASE DEFAULT
861	WRITE( message_string, * ) 'unknown variable named "', &
862	TRIM( variable_chr ), '" found in', &
863	' data from prior run on PE ', myid
864	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
865	END SELECT
866	!
867	!-- Read next string
868	READ ( 13 ) variable_chr
869
870	ENDDO
871
872
873	END SUBROUTINE read_var_list
874
875
876
877	!------------------------------------------------------------------------------!
878	! Description:
879	! ------------
880	!> Skipping the global control variables from restart-file (binary format)
881	!> except some information needed when reading restart data from a previous
882	!> run which used a smaller total domain or/and a different domain decomposition.
883	!------------------------------------------------------------------------------!
884
885	SUBROUTINE read_parts_of_var_list
886
887
888	USE arrays_3d, &
889	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
890
891	USE control_parameters
892
893	USE indices, &
894	ONLY: nz, nx, nx_on_file, ny, ny_on_file
895
896	USE kinds
897
898	USE pegrid
899
900	USE statistics, &
901	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
902	v_max, v_max_ijk, w_max, w_max_ijk
903
904	IMPLICIT NONE
905
906	CHARACTER (LEN=10) :: version_on_file
907	CHARACTER (LEN=20) :: momentum_advec_check
908	CHARACTER (LEN=20) :: scalar_advec_check
909	CHARACTER (LEN=30) :: variable_chr
910	CHARACTER (LEN=1) :: cdum
911
912	INTEGER(iwp) :: max_pr_user_on_file
913	INTEGER(iwp) :: nz_on_file
914	INTEGER(iwp) :: statistic_regions_on_file
915	INTEGER(iwp) :: tmp_mpru
916	INTEGER(iwp) :: tmp_sr
917
918	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
919	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
920
921
922	CALL check_open( 13 )
923
924	READ ( 13 ) version_on_file
925
926
927	!
928	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
929	!-- run
930	READ ( 13 ) variable_chr
931	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
932	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
933	'run on PE ', myid
934	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
935	ENDIF
936	READ ( 13 ) numprocs_previous_run
937
938	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
939	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
940	ENDIF
941
942	READ ( 13 ) variable_chr
943	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
944	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
945	'prior run on PE ', myid
946	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
947	ENDIF
948	READ ( 13 ) hor_index_bounds_previous_run
949
950	!
951	!-- Read vertical number of gridpoints and number of different areas used
952	!-- for computing statistics. Allocate arrays depending on these values,
953	!-- which are needed for the following read instructions.
954	READ ( 13 ) variable_chr
955	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
956	message_string = 'nz not found in restart data file'
957	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
958	ENDIF
959	READ ( 13 ) nz_on_file
960	IF ( nz_on_file /= nz ) THEN
961	WRITE( message_string, * ) 'mismatch concerning number of ', &
962	'gridpoints along z', &
963	'&nz on file = "', nz_on_file, '"', &
964	'&nz from run = "', nz, '"'
965	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
966	ENDIF
967
968	READ ( 13 ) variable_chr
969	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
970	message_string = 'max_pr_user not found in restart data file'
971	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
972	ENDIF
973	READ ( 13 ) max_pr_user_on_file
974	IF ( max_pr_user_on_file /= max_pr_user ) THEN
975	WRITE( message_string, * ) 'number of user profiles on res', &
976	'tart data file differs from the current ', &
977	'run&max_pr_user on file = "', &
978	max_pr_user_on_file, '"', &
979	'&max_pr_user from run = "', &
980	max_pr_user, '"'
981	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
982	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
983	ELSE
984	tmp_mpru = max_pr_user
985	ENDIF
986
987	READ ( 13 ) variable_chr
988	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
989	message_string = 'statistic_regions not found in restart data file'
990	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
991	ENDIF
992	READ ( 13 ) statistic_regions_on_file
993	IF ( statistic_regions_on_file /= statistic_regions ) THEN
994	WRITE( message_string, * ) 'statistic regions on restart data file ',&
995	'differ from the current run', &
996	'&statistic regions on file = "', &
997	statistic_regions_on_file, '"', &
998	'&statistic regions from run = "', &
999	statistic_regions, '"', &
1000	'&statistic data may be lost!'
1001	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
1002	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
1003	ELSE
1004	tmp_sr = statistic_regions
1005	ENDIF
1006
1007	!
1008	!-- Now read and check some control parameters and skip the rest
1009	READ ( 13 ) variable_chr
1010
1011	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
1012
1013	SELECT CASE ( TRIM( variable_chr ) )
1014
1015	CASE ( 'average_count_pr' )
1016	READ ( 13 ) average_count_pr
1017	IF ( average_count_pr /= 0 ) THEN
1018	WRITE( message_string, * ) 'inflow profiles not temporally ', &
1019	'averaged. &Averaging will be done now using ', &
1020	average_count_pr, ' samples.'
1021	CALL message( 'read_parts_of_var_list', 'PA0309', &
1022	0, 1, 0, 6, 0 )
1023	ENDIF
1024
1025	CASE ( 'hom' )
1026	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
1027	0:statistic_regions_on_file) )
1028	READ ( 13 ) hom_on_file
1029	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
1030	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
1031	DEALLOCATE( hom_on_file )
1032
1033	CASE ( 'hom_sum' )
1034	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
1035	0:statistic_regions_on_file) )
1036	READ ( 13 ) hom_sum_on_file
1037	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
1038	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
1039	DEALLOCATE( hom_sum_on_file )
1040
1041	CASE ( 'momentum_advec' )
1042	momentum_advec_check = momentum_advec
1043	READ ( 13 ) momentum_advec
1044	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
1045	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
1046	'differs from momentum_advec of the initial run.'
1047	CALL message( 'read_parts_of_var_list', 'PA0100', &
1048	1, 2, 0, 6, 0 )
1049	END IF
1050
1051	CASE ( 'nx' )
1052	READ ( 13 ) nx_on_file
1053
1054	CASE ( 'ny' )
1055	READ ( 13 ) ny_on_file
1056
1057	CASE ( 'ref_state' )
1058	READ ( 13 ) ref_state
1059
1060	CASE ( 'scalar_advec' )
1061	scalar_advec_check = scalar_advec
1062	READ ( 13 ) scalar_advec
1063	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
1064	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
1065	'differs from scalar_advec of the initial run.'
1066	CALL message( 'read_parts_of_var_list', 'PA0101', &
1067	1, 2, 0, 6, 0 )
1068	END IF
1069
1070	CASE DEFAULT
1071
1072	READ ( 13 ) cdum
1073
1074	END SELECT
1075
1076	READ ( 13 ) variable_chr
1077
1078	ENDDO
1079
1080	!
1081	!-- Calculate the temporal average of vertical profiles, if neccessary
1082	IF ( average_count_pr /= 0 ) THEN
1083	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
1084	ENDIF
1085
1086
1087	END SUBROUTINE read_parts_of_var_list
1088
1089
1090
1091	!------------------------------------------------------------------------------!
1092	! Description:
1093	! ------------
1094	!> Skipping the global control variables from restart-file (binary format)
1095	!------------------------------------------------------------------------------!
1096
1097	SUBROUTINE skip_var_list
1098
1099	USE control_parameters, &
1100	ONLY: wind_turbine, wind_turbine_prerun, virtual_flight, &
1101	virtual_flight_prerun, syn_turb_gen, syn_turb_gen_prerun
1102
1103	USE wind_turbine_model_mod, &
1104	ONLY: wtm_skip_var_list
1105
1106	USE flight_mod, &
1107	ONLY: flight_skip_var_list
1108
1109	USE synthetic_turbulence_generator_mod, &
1110	ONLY: stg_skip_var_list
1111
1112
1113	IMPLICIT NONE
1114
1115	CHARACTER (LEN=10) :: version_on_file
1116	CHARACTER (LEN=30) :: variable_chr
1117
1118	CHARACTER (LEN=1) :: cdum
1119
1120
1121	READ ( 13 ) version_on_file
1122
1123	READ ( 13 ) variable_chr
1124
1125	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
1126
1127	READ ( 13 ) cdum
1128	READ ( 13 ) variable_chr
1129
1130	ENDDO
1131
1132	!
1133	!-- In case of virtual flights, skip also variables related to
1134	!-- this module.
1135	IF ( wind_turbine_prerun ) CALL wtm_skip_var_list
1136
1137	!
1138	!-- In case of virtual flights, skip also variables related to
1139	!-- this module.
1140	IF ( virtual_flight_prerun) CALL flight_skip_var_list
1141
1142	!
1143	!-- In case of virtual flights, skip also variables related to
1144	!-- this module.
1145	IF ( syn_turb_gen_prerun ) CALL stg_skip_var_list
1146
1147
1148	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |