Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2764

Last change on this file since 2764 was 2718, checked in by maronga, 7 years ago
deleting of deprecated files; headers updated where needed
Property svn:keywords set to `Id`
File size: 41.4 KB

Line
1	!> @file read_var_list.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2018 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: read_var_list.f90 2718 2018-01-02 08:49:38Z gronemeier $
27	! Corrected "Former revisions" section
28	!
29	! 2696 2017-12-14 17:12:51Z kanani
30	! Change in file header (GPL part)
31	! + rans_mode, turbulence_closure (TG)
32	!
33	! 2576 2017-10-24 13:49:46Z Giersch
34	! * end * marks the end of the standard parameter list of restart files
35	! like it was before revision 2563. To skip also the variables of the modules
36	! wind_turbine_model_mod, flight_mod and synthetic_turbulence_generator_mod
37	! three new functions has to be defined which are called in skip_var_list.
38	! Adapted binary version number
39	!
40	! 2575 2017-10-24 09:57:58Z maronga
41	! Renamed phi -> latitude, added longitude
42	!
43	! 2563 2017-10-19 15:36:10Z Giersch
44	! CALL stg_read_restart_data moved to synthetic_turbulence_generator_mod and
45	! CALL flight_read_restart_data moved to virtual_flights_mod. Furthermore
46	! * end default * marks the end of the standard parameter list of restart
47	! files and * end * marks the end of all parameter including module
48	! parameter. Therefore the call of flight_skip_var_list becomes unnecessary.
49	!
50	! 2372 2017-08-25 12:37:32Z sward
51	! y_shift added to vars, version no. increased
52	!
53	! 2365 2017-08-21 14:59:59Z kanani
54	! Vertical grid nesting implemented (SadiqHuq)
55	!
56	! 2339 2017-08-07 13:55:26Z gronemeier
57	! corrected timestamp in header
58	!
59	! 2338 2017-08-07 12:15:38Z gronemeier
60	! Modularize 1D model
61	!
62	! 2320 2017-07-21 12:47:43Z suehring
63	! Formatting adjustment
64	!
65	! 2265 2017-06-08 16:58:28Z schwenkel
66	! Unused variables removed.
67	!
68	! 2259 2017-06-08 09:09:11Z gronemeier
69	! Implemented synthetic turbulence generator
70	!
71	! 2233 2017-05-30 18:08:54Z suehring
72	!
73	! 2232 2017-05-30 17:47:52Z suehring
74	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
75	! wall_salinityflux
76	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
77	! tunnel_wall_depth
78	!
79	! 2042 2016-11-02 13:47:31Z suehring
80	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
81	!
82	! 2000 2016-08-20 18:09:15Z knoop
83	! Forced header and separation lines into 80 columns
84	!
85	! 1992 2016-08-12 15:14:59Z suehring
86	! top_scalarflux added
87	!
88	! 1960 2016-07-12 16:34:24Z suehring
89	! Separate humidity and passive scalar
90	! Remove unused variables from ONLY list
91	!
92	! 1957 2016-07-07 10:43:48Z suehring
93	! flight module added
94	!
95	! 1849 2016-04-08 11:33:18Z hoffmann
96	! Adapted for modularization of microphysics
97	!
98	! 1833 2016-04-07 14:23:03Z raasch
99	! spectra_mod added
100	!
101	! 1831 2016-04-07 13:15:51Z hoffmann
102	! turbulence renamed collision_turbulence, drizzle renamed
103	! cloud_water_sedimentation
104	!
105	! 1808 2016-04-05 19:44:00Z raasch
106	! test output removed
107	!
108	! 1783 2016-03-06 18:36:17Z raasch
109	! netcdf module name changed + related changes
110	!
111	! 1699 2015-10-29 08:02:35Z maronga
112	! Bugfix: update of binary version from 3.9b to 4.0 was missing
113	!
114	! 1691 2015-10-26 16:17:44Z maronga
115	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
116	! output of prandtl_layer and rif_min, rif_max.
117	!
118	! 1682 2015-10-07 23:56:08Z knoop
119	! Code annotations made doxygen readable
120	!
121	! 1615 2015-07-08 18:49:19Z suehring
122	! Enable turbulent inflow for passive_scalar and humidity
123	!
124	! 1585 2015-04-30 07:05:52Z maronga
125	! Adapted for RRTMG
126	!
127	! 1560 2015-03-06 10:48:54Z keck
128	! +recycling_yshift
129	!
130	! 1522 2015-01-14 10:53:12Z keck
131	! added query for checking if the advection scheme in the restart run is the
132	! same as the advection scheme in the corresponding initial run
133	!
134	! 1502 2014-12-03 18:22:31Z kanani
135	! Canopy module and parameters removed (parameters are always read from
136	! canopy_par NAMELIST for initial and restart runs)
137	!
138	! 1496 2014-12-02 17:25:50Z maronga
139	! Renamed "radiation" -> "cloud_top_radiation"
140	!
141	! 1484 2014-10-21 10:53:05Z kanani
142	! Changes in the course of the canopy-model modularization:
143	! parameters alpha_lad, beta_lad, lai_beta added,
144	! module plant_canopy_model_mod added,
145	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
146	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
147	!
148	! 1322 2014-03-20 16:38:49Z raasch
149	! REAL functions provided with KIND-attribute
150	!
151	! 1320 2014-03-20 08:40:49Z raasch
152	! ONLY-attribute added to USE-statements,
153	! kind-parameters added to all INTEGER and REAL declaration statements,
154	! kinds are defined in new module kinds,
155	! old module precision_kind is removed,
156	! revision history before 2012 removed,
157	! comment fields (!:) to be used for variable explanations added to
158	! all variable declaration statements
159	!
160	! 1308 2014-03-13 14:58:42Z fricke
161	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
162	! +do3d_time_count
163	!
164	! 1253 2013-11-07 10:48:12Z fricke
165	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
166	! is zero for initializing_actions = 'cyclic_fill'
167	!
168	! 1241 2013-10-30 11:36:58Z heinze
169	! +nudging
170	! +large_scale_forcing
171	!
172	! 1195 2013-07-01 12:27:57Z heinze
173	! Bugfix: allocate ref_state
174	!
175	! 1179 2013-06-14 05:57:58Z raasch
176	! +ref_state
177	!
178	! 1115 2013-03-26 18:16:16Z hoffmann
179	! unused variables removed
180	!
181	! 1092 2013-02-02 11:24:22Z raasch
182	! unused variables removed
183	!
184	! 1065 2012-11-22 17:42:36Z hoffmann
185	! +nc, c_sedimentation, limiter_sedimentation, turbulence
186	! -mu_constant, mu_constant_value
187	!
188	! 1053 2012-11-13 17:11:03Z hoffmann
189	! necessary expansions according to the two new prognostic equations (nr, qr)
190	! of the two-moment cloud physics scheme:
191	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
192	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
193	! +surface_waterflux_*
194	!
195	! in addition, steering parameters parameters of the two-moment cloud physics
196	! scheme:
197	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
198	!
199	! 1036 2012-10-22 13:43:42Z raasch
200	! code put under GPL (PALM 3.9)
201	!
202	! 1015 2012-09-27 09:23:24Z raasch
203	! -adjust_mixing_length
204	!
205	! 1003 2012-09-14 14:35:53Z raasch
206	! -grid_matching
207	!
208	! 1001 2012-09-13 14:08:46Z raasch
209	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
210	! overshoot_limit_, ups_limit_
211	!
212	! 978 2012-08-09 08:28:32Z fricke
213	! -km_damp_max, outflow_damping_width
214	! +pt_damping_factor, pt_damping_width
215	! +z0h_factor
216	!
217	! 940 2012-07-09 14:31:00Z raasch
218	! +neutral
219	!
220	! 927 2012-06-06 19:15:04Z raasch
221	! +masking_method
222	!
223	! 849 2012-03-15 10:35:09Z raasch
224	! first_call_advec_particles renamed first_call_lpm
225	!
226	! 824 2012-02-17 09:09:57Z raasch
227	! +curvature_solution_effects
228	!
229	! Revision 1.1 1998/03/18 20:18:48 raasch
230	! Initial revision
231	!
232	!
233	! Description:
234	! ------------
235	!> Reading values of global control variables from restart-file (binary format)
236	!------------------------------------------------------------------------------!
237	SUBROUTINE read_var_list
238
239
240	USE arrays_3d, &
241	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
242	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
243
244	USE control_parameters
245
246	USE grid_variables, &
247	ONLY: dx, dy
248
249	USE indices, &
250	ONLY: nz, nx, nx_on_file, ny, ny_on_file
251
252	USE microphysics_mod, &
253	ONLY: c_sedimentation, collision_turbulence, &
254	cloud_water_sedimentation, limiter_sedimentation, &
255	nc_const, ventilation_effect
256
257	USE model_1d_mod, &
258	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
259
260	USE netcdf_interface, &
261	ONLY: netcdf_precision, output_for_t0
262
263	USE particle_attributes, &
264	ONLY: curvature_solution_effects
265
266	USE pegrid
267
268	USE radiation_model_mod, &
269	ONLY: time_radiation
270
271	USE spectra_mod, &
272	ONLY: average_count_sp
273
274	USE statistics, &
275	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
276	v_max, v_max_ijk, w_max, w_max_ijk
277
278	USE vertical_nesting_mod, &
279	ONLY: vnest_init
280
281	IMPLICIT NONE
282
283	CHARACTER (LEN=10) :: binary_version, version_on_file
284	CHARACTER (LEN=30) :: variable_chr
285
286
287	CALL check_open( 13 )
288
289	!
290	!-- Make version number check first
291	READ ( 13 ) version_on_file
292	binary_version = '4.5'
293	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
294	WRITE( message_string, * ) 'version mismatch concerning control ', &
295	'variables', &
296	'&version on file = "', &
297	TRIM( version_on_file ), '"', &
298	'&version on program = "', &
299	TRIM( binary_version ), '"'
300	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
301	ENDIF
302
303	!
304	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
305	!-- run
306	READ ( 13 ) variable_chr
307	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
308	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
309	'run on PE ', myid
310	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
311	ENDIF
312	READ ( 13 ) numprocs_previous_run
313
314	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
315	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
316	ENDIF
317
318	READ ( 13 ) variable_chr
319	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
320	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
321	'prior run on PE ', myid
322	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
323	ENDIF
324	READ ( 13 ) hor_index_bounds_previous_run
325
326	!
327	!-- Read vertical number of gridpoints and number of different areas used
328	!-- for computing statistics. Allocate arrays depending on these values,
329	!-- which are needed for the following read instructions.
330	READ ( 13 ) variable_chr
331	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
332	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
333	myid
334	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
335	ENDIF
336	READ ( 13 ) nz
337
338	READ ( 13 ) variable_chr
339	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
340	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
341	'prior run on PE ', myid
342	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
343	ENDIF
344	READ ( 13 ) max_pr_user ! This value is checked against the number of
345	! user profiles given for the current run
346	! in routine user_parin (it has to match)
347
348	READ ( 13 ) variable_chr
349	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
350	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
351	'prior run on PE ', myid
352	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
353	ENDIF
354	READ ( 13 ) statistic_regions
355	IF ( .NOT. ALLOCATED( ug ) ) THEN
356	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
357	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
358	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
359	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
360	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
361	ENDIF
362
363	!
364	!-- Now read all control parameters:
365	!-- Caution: When the following read instructions have been changed, the
366	!-- ------- version number stored in the variable binary_version has to be
367	!-- increased. The same changes must also be done in write_var_list.
368	READ ( 13 ) variable_chr
369	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
370
371	SELECT CASE ( TRIM( variable_chr ) )
372
373	CASE ( 'advected_distance_x' )
374	READ ( 13 ) advected_distance_x
375	CASE ( 'advected_distance_y' )
376	READ ( 13 ) advected_distance_y
377	CASE ( 'alpha_surface' )
378	READ ( 13 ) alpha_surface
379	CASE ( 'average_count_pr' )
380	READ ( 13 ) average_count_pr
381	CASE ( 'average_count_sp' )
382	READ ( 13 ) average_count_sp
383	CASE ( 'average_count_3d' )
384	READ ( 13 ) average_count_3d
385	CASE ( 'bc_e_b' )
386	READ ( 13 ) bc_e_b
387	CASE ( 'bc_lr' )
388	READ ( 13 ) bc_lr
389	CASE ( 'bc_ns' )
390	READ ( 13 ) bc_ns
391	CASE ( 'bc_p_b' )
392	READ ( 13 ) bc_p_b
393	CASE ( 'bc_p_t' )
394	READ ( 13 ) bc_p_t
395	CASE ( 'bc_pt_b' )
396	READ ( 13 ) bc_pt_b
397	CASE ( 'bc_pt_t' )
398	READ ( 13 ) bc_pt_t
399	CASE ( 'bc_pt_t_val' )
400	READ ( 13 ) bc_pt_t_val
401	CASE ( 'bc_q_b' )
402	READ ( 13 ) bc_q_b
403	CASE ( 'bc_q_t' )
404	READ ( 13 ) bc_q_t
405	CASE ( 'bc_q_t_val' )
406	READ ( 13 ) bc_q_t_val
407	CASE ( 'bc_s_b' )
408	READ ( 13 ) bc_s_b
409	CASE ( 'bc_s_t' )
410	READ ( 13 ) bc_s_t
411	CASE ( 'bc_sa_t' )
412	READ ( 13 ) bc_sa_t
413	CASE ( 'bc_uv_b' )
414	READ ( 13 ) bc_uv_b
415	CASE ( 'bc_uv_t' )
416	READ ( 13 ) bc_uv_t
417	CASE ( 'bottom_salinityflux' )
418	READ ( 13 ) bottom_salinityflux
419	CASE ( 'building_height' )
420	READ ( 13 ) building_height
421	CASE ( 'building_length_x' )
422	READ ( 13 ) building_length_x
423	CASE ( 'building_length_y' )
424	READ ( 13 ) building_length_y
425	CASE ( 'building_wall_left' )
426	READ ( 13 ) building_wall_left
427	CASE ( 'building_wall_south' )
428	READ ( 13 ) building_wall_south
429	CASE ( 'call_psolver_at_all_substeps' )
430	READ ( 13 ) call_psolver_at_all_substeps
431	CASE ( 'canyon_height' )
432	READ ( 13 ) canyon_height
433	CASE ( 'canyon_width_x' )
434	READ ( 13 ) canyon_width_x
435	CASE ( 'canyon_width_y' )
436	READ ( 13 ) canyon_width_y
437	CASE ( 'canyon_wall_left' )
438	READ ( 13 ) canyon_wall_left
439	CASE ( 'canyon_wall_south' )
440	READ ( 13 ) canyon_wall_south
441	CASE ( 'c_sedimentation' )
442	READ ( 13 ) c_sedimentation
443	CASE ( 'cfl_factor' )
444	READ ( 13 ) cfl_factor
445	CASE ( 'cloud_droplets' )
446	READ ( 13 ) cloud_droplets
447	CASE ( 'cloud_physics' )
448	READ ( 13 ) cloud_physics
449	CASE ( 'cloud_scheme' )
450	READ ( 13 ) cloud_scheme
451	CASE ( 'collective_wait' )
452	READ ( 13 ) collective_wait
453	CASE ( 'conserve_volume_flow' )
454	READ ( 13 ) conserve_volume_flow
455	CASE ( 'conserve_volume_flow_mode' )
456	READ ( 13 ) conserve_volume_flow_mode
457	CASE ( 'constant_flux_layer' )
458	READ ( 13 ) constant_flux_layer
459	CASE ( 'coupling_start_time' )
460	READ ( 13 ) coupling_start_time
461	CASE ( 'current_timestep_number' )
462	READ ( 13 ) current_timestep_number
463	CASE ( 'curvature_solution_effects' )
464	READ ( 13 ) curvature_solution_effects
465	CASE ( 'cycle_mg' )
466	READ ( 13 ) cycle_mg
467	CASE ( 'damp_level_1d' )
468	READ ( 13 ) damp_level_1d
469	CASE ( 'dissipation_1d' )
470	READ ( 13 ) dissipation_1d
471	CASE ( 'do2d_xy_time_count' )
472	READ ( 13 ) do2d_xy_time_count
473	CASE ( 'do2d_xz_time_count' )
474	READ ( 13 ) do2d_xz_time_count
475	CASE ( 'do2d_yz_time_count' )
476	READ ( 13 ) do2d_yz_time_count
477	CASE ( 'do3d_time_count' )
478	READ ( 13 ) do3d_time_count
479	CASE ( 'dp_external' )
480	READ ( 13 ) dp_external
481	CASE ( 'dp_level_b' )
482	READ ( 13 ) dp_level_b
483	CASE ( 'dp_smooth' )
484	READ ( 13 ) dp_smooth
485	CASE ( 'dpdxy' )
486	READ ( 13 ) dpdxy
487	CASE ( 'cloud_water_sedimentation' )
488	READ ( 13 ) cloud_water_sedimentation
489	CASE ( 'dt_pr_1d' )
490	READ ( 13 ) dt_pr_1d
491	CASE ( 'dt_run_control_1d' )
492	READ ( 13 ) dt_run_control_1d
493	CASE ( 'dt_3d' )
494	READ ( 13 ) dt_3d
495	CASE ( 'dvrp_filecount' )
496	READ ( 13 ) dvrp_filecount
497	CASE ( 'dx' )
498	READ ( 13 ) dx
499	CASE ( 'dy' )
500	READ ( 13 ) dy
501	CASE ( 'dz' )
502	READ ( 13 ) dz
503	CASE ( 'dz_max' )
504	READ ( 13 ) dz_max
505	CASE ( 'dz_stretch_factor' )
506	READ ( 13 ) dz_stretch_factor
507	CASE ( 'dz_stretch_level' )
508	READ ( 13 ) dz_stretch_level
509	CASE ( 'e_min' )
510	READ ( 13 ) e_min
511	CASE ( 'end_time_1d' )
512	READ ( 13 ) end_time_1d
513	CASE ( 'fft_method' )
514	READ ( 13 ) fft_method
515	CASE ( 'first_call_lpm' )
516	READ ( 13 ) first_call_lpm
517	CASE ( 'galilei_transformation' )
518	READ ( 13 ) galilei_transformation
519	CASE ( 'hom' )
520	READ ( 13 ) hom
521	CASE ( 'hom_sum' )
522	READ ( 13 ) hom_sum
523	CASE ( 'humidity' )
524	READ ( 13 ) humidity
525	CASE ( 'inflow_damping_factor' )
526	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
527	ALLOCATE( inflow_damping_factor(0:nz+1) )
528	ENDIF
529	READ ( 13 ) inflow_damping_factor
530	CASE ( 'inflow_damping_height' )
531	READ ( 13 ) inflow_damping_height
532	CASE ( 'inflow_damping_width' )
533	READ ( 13 ) inflow_damping_width
534	CASE ( 'inflow_disturbance_begin' )
535	READ ( 13 ) inflow_disturbance_begin
536	CASE ( 'inflow_disturbance_end' )
537	READ ( 13 ) inflow_disturbance_end
538	CASE ( 'km_constant' )
539	READ ( 13 ) km_constant
540	CASE ( 'large_scale_forcing' )
541	READ ( 13 ) large_scale_forcing
542	CASE ( 'large_scale_subsidence' )
543	READ ( 13 ) large_scale_subsidence
544	CASE ( 'limiter_sedimentation' )
545	READ ( 13 ) limiter_sedimentation
546	CASE ( 'loop_optimization' )
547	READ ( 13 ) loop_optimization
548	CASE ( 'masking_method' )
549	READ ( 13 ) masking_method
550	CASE ( 'mean_inflow_profiles' )
551	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
552	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
553	ENDIF
554	READ ( 13 ) mean_inflow_profiles
555	CASE ( 'mg_cycles' )
556	READ ( 13 ) mg_cycles
557	CASE ( 'mg_switch_to_pe0_level' )
558	READ ( 13 ) mg_switch_to_pe0_level
559	CASE ( 'mixing_length_1d' )
560	READ ( 13 ) mixing_length_1d
561	CASE ( 'momentum_advec' )
562	READ ( 13 ) momentum_advec
563	CASE ( 'most_method' )
564	READ ( 13 ) most_method
565	CASE ( 'nc_const' )
566	READ ( 13 ) nc_const
567	CASE ( 'netcdf_precision' )
568	READ ( 13 ) netcdf_precision
569	CASE ( 'neutral' )
570	READ ( 13 ) neutral
571	CASE ( 'ngsrb' )
572	READ ( 13 ) ngsrb
573	CASE ( 'nsor' )
574	READ ( 13 ) nsor
575	CASE ( 'nsor_ini' )
576	READ ( 13 ) nsor_ini
577	CASE ( 'nudging' )
578	READ ( 13 ) nudging
579	CASE ( 'num_leg' )
580	READ ( 13 ) num_leg
581	CASE ( 'nx' )
582	READ ( 13 ) nx
583	nx_on_file = nx
584	CASE ( 'ny' )
585	READ ( 13 ) ny
586	ny_on_file = ny
587	CASE ( 'ocean' )
588	READ ( 13 ) ocean
589	CASE ( 'old_dt' )
590	READ ( 13 ) old_dt
591	CASE ( 'omega' )
592	READ ( 13 ) omega
593	CASE ( 'omega_sor' )
594	READ ( 13 ) omega_sor
595	CASE ( 'output_for_t0' )
596	READ (13) output_for_t0
597	CASE ( 'passive_scalar' )
598	READ ( 13 ) passive_scalar
599	CASE ( 'latitude' )
600	READ ( 13 ) latitude
601	CASE ( 'longitude' )
602	READ ( 13 ) longitude
603	CASE ( 'prandtl_number' )
604	READ ( 13 ) prandtl_number
605	CASE ( 'precipitation' )
606	READ ( 13 ) precipitation
607	CASE ( 'psolver' )
608	READ ( 13 ) psolver
609	CASE ( 'pt_damping_factor' )
610	READ ( 13 ) pt_damping_factor
611	CASE ( 'pt_damping_width' )
612	READ ( 13 ) pt_damping_width
613	CASE ( 'pt_init' )
614	READ ( 13 ) pt_init
615	CASE ( 'pt_reference' )
616	READ ( 13 ) pt_reference
617	CASE ( 'pt_surface' )
618	READ ( 13 ) pt_surface
619	CASE ( 'pt_surface_initial_change' )
620	READ ( 13 ) pt_surface_initial_change
621	CASE ( 'pt_vertical_gradient' )
622	READ ( 13 ) pt_vertical_gradient
623	CASE ( 'pt_vertical_gradient_level' )
624	READ ( 13 ) pt_vertical_gradient_level
625	CASE ( 'pt_vertical_gradient_level_ind' )
626	READ ( 13 ) pt_vertical_gradient_level_ind
627	CASE ( 'q_init' )
628	READ ( 13 ) q_init
629	CASE ( 'q_surface' )
630	READ ( 13 ) q_surface
631	CASE ( 'q_surface_initial_change' )
632	READ ( 13 ) q_surface_initial_change
633	CASE ( 'q_vertical_gradient' )
634	READ ( 13 ) q_vertical_gradient
635	CASE ( 'q_vertical_gradient_level' )
636	READ ( 13 ) q_vertical_gradient_level
637	CASE ( 'q_vertical_gradient_level_ind' )
638	READ ( 13 ) q_vertical_gradient_level_ind
639	CASE ( 'cloud_top_radiation' )
640	READ ( 13 ) cloud_top_radiation
641	CASE ( 'random_generator' )
642	READ ( 13 ) random_generator
643	CASE ( 'random_heatflux' )
644	READ ( 13 ) random_heatflux
645	CASE ( 'rans_mode' )
646	READ ( 13 ) rans_mode
647	CASE ( 'rayleigh_damping_factor' )
648	READ ( 13 ) rayleigh_damping_factor
649	CASE ( 'rayleigh_damping_height' )
650	READ ( 13 ) rayleigh_damping_height
651	CASE ( 'recycling_width' )
652	READ ( 13 ) recycling_width
653	CASE ( 'recycling_yshift' )
654	READ ( 13 ) recycling_yshift
655	CASE ( 'reference_state' )
656	READ ( 13 ) reference_state
657	CASE ( 'ref_state' )
658	READ ( 13 ) ref_state
659	CASE ( 'residual_limit' )
660	READ ( 13 ) residual_limit
661	CASE ( 'roughness_length' )
662	READ ( 13 ) roughness_length
663	CASE ( 'runnr' )
664	READ ( 13 ) runnr
665	CASE ( 'run_coupled' )
666	READ ( 13 ) run_coupled
667	CASE ( 's_init' )
668	READ ( 13 ) s_init
669	CASE ( 's_surface' )
670	READ ( 13 ) s_surface
671	CASE ( 's_surface_initial_change' )
672	READ ( 13 ) s_surface_initial_change
673	CASE ( 's_vertical_gradient' )
674	READ ( 13 ) s_vertical_gradient
675	CASE ( 's_vertical_gradient_level' )
676	READ ( 13 ) s_vertical_gradient_level
677	CASE ( 's_vertical_gradient_level_ind' )
678	READ ( 13 ) s_vertical_gradient_level_ind
679	CASE ( 'sa_init' )
680	READ ( 13 ) sa_init
681	CASE ( 'sa_surface' )
682	READ ( 13 ) sa_surface
683	CASE ( 'sa_vertical_gradient' )
684	READ ( 13 ) sa_vertical_gradient
685	CASE ( 'sa_vertical_gradient_level' )
686	READ ( 13 ) sa_vertical_gradient_level
687	CASE ( 'scalar_advec' )
688	READ ( 13 ) scalar_advec
689	CASE ( 'simulated_time' )
690	READ ( 13 ) simulated_time
691	CASE ( 'surface_heatflux' )
692	READ ( 13 ) surface_heatflux
693	CASE ( 'surface_pressure' )
694	READ ( 13 ) surface_pressure
695	CASE ( 'surface_scalarflux' )
696	READ ( 13 ) surface_scalarflux
697	CASE ( 'surface_waterflux' )
698	READ ( 13 ) surface_waterflux
699	CASE ( 'time_coupling' )
700	READ ( 13 ) time_coupling
701	CASE ( 'time_disturb' )
702	READ ( 13 ) time_disturb
703	CASE ( 'time_dopr' )
704	READ ( 13 ) time_dopr
705	CASE ( 'time_domask' )
706	READ ( 13 ) time_domask
707	CASE ( 'time_dopr_av' )
708	READ ( 13 ) time_dopr_av
709	CASE ( 'time_dopr_listing' )
710	READ ( 13 ) time_dopr_listing
711	CASE ( 'time_dopts' )
712	READ ( 13 ) time_dopts
713	CASE ( 'time_dosp' )
714	READ ( 13 ) time_dosp
715	CASE ( 'time_dots' )
716	READ ( 13 ) time_dots
717	CASE ( 'time_do2d_xy' )
718	READ ( 13 ) time_do2d_xy
719	CASE ( 'time_do2d_xz' )
720	READ ( 13 ) time_do2d_xz
721	CASE ( 'time_do2d_yz' )
722	READ ( 13 ) time_do2d_yz
723	CASE ( 'time_do3d' )
724	READ ( 13 ) time_do3d
725	CASE ( 'time_do_av' )
726	READ ( 13 ) time_do_av
727	CASE ( 'time_do_sla' )
728	READ ( 13 ) time_do_sla
729	CASE ( 'time_dvrp' )
730	READ ( 13 ) time_dvrp
731	CASE ( 'time_radiation' )
732	READ ( 13 ) time_radiation
733	CASE ( 'time_restart' )
734	READ ( 13 ) time_restart
735	CASE ( 'time_run_control' )
736	READ ( 13 ) time_run_control
737	CASE ( 'time_since_reference_point' )
738	READ ( 13 ) time_since_reference_point
739	CASE ( 'timestep_scheme' )
740	READ ( 13 ) timestep_scheme
741	CASE ( 'topography' )
742	READ ( 13 ) topography
743	CASE ( 'topography_grid_convention' )
744	READ ( 13 ) topography_grid_convention
745	CASE ( 'top_heatflux' )
746	READ ( 13 ) top_heatflux
747	CASE ( 'top_momentumflux_u' )
748	READ ( 13 ) top_momentumflux_u
749	CASE ( 'top_momentumflux_v' )
750	READ ( 13 ) top_momentumflux_v
751	CASE ( 'top_salinityflux' )
752	READ ( 13 ) top_salinityflux
753	CASE ( 'top_scalarflux' )
754	READ ( 13 ) top_scalarflux
755	CASE ( 'tsc' )
756	READ ( 13 ) tsc
757	CASE ( 'collision_turbulence' )
758	READ ( 13 ) collision_turbulence
759	CASE ( 'tunnel_height' )
760	READ ( 13 ) tunnel_height
761	CASE ( 'tunnel_length' )
762	READ ( 13 ) tunnel_length
763	CASE ( 'tunnel_width_x' )
764	READ ( 13 ) tunnel_width_x
765	CASE ( 'tunnel_width_y' )
766	READ ( 13 ) tunnel_width_y
767	CASE ( 'tunnel_wall_depth' )
768	READ ( 13 ) tunnel_wall_depth
769	CASE ( 'turbulence_closure' )
770	READ ( 13 ) turbulence_closure
771	CASE ( 'turbulent_inflow' )
772	READ ( 13 ) turbulent_inflow
773	CASE ( 'u_bulk' )
774	READ ( 13 ) u_bulk
775	CASE ( 'u_init' )
776	READ ( 13 ) u_init
777	CASE ( 'u_max' )
778	READ ( 13 ) u_max
779	CASE ( 'u_max_ijk' )
780	READ ( 13 ) u_max_ijk
781	CASE ( 'ug' )
782	READ ( 13 ) ug
783	CASE ( 'ug_surface' )
784	READ ( 13 ) ug_surface
785	CASE ( 'ug_vertical_gradient' )
786	READ ( 13 ) ug_vertical_gradient
787	CASE ( 'ug_vertical_gradient_level' )
788	READ ( 13 ) ug_vertical_gradient_level
789	CASE ( 'ug_vertical_gradient_level_ind' )
790	READ ( 13 ) ug_vertical_gradient_level_ind
791	CASE ( 'use_surface_fluxes' )
792	READ ( 13 ) use_surface_fluxes
793	CASE ( 'use_top_fluxes' )
794	READ ( 13 ) use_top_fluxes
795	CASE ( 'use_ug_for_galilei_tr' )
796	READ ( 13 ) use_ug_for_galilei_tr
797	CASE ( 'use_upstream_for_tke' )
798	READ ( 13 ) use_upstream_for_tke
799	CASE ( 'v_bulk' )
800	READ ( 13 ) v_bulk
801	CASE ( 'v_init' )
802	READ ( 13 ) v_init
803	CASE ( 'v_max' )
804	READ ( 13 ) v_max
805	CASE ( 'v_max_ijk' )
806	READ ( 13 ) v_max_ijk
807	CASE ( 'ventilation_effect' )
808	READ ( 13 ) ventilation_effect
809	CASE ( 'vg' )
810	READ ( 13 ) vg
811	CASE ( 'vg_surface' )
812	READ ( 13 ) vg_surface
813	CASE ( 'vg_vertical_gradient' )
814	READ ( 13 ) vg_vertical_gradient
815	CASE ( 'vg_vertical_gradient_level' )
816	READ ( 13 ) vg_vertical_gradient_level
817	CASE ( 'vg_vertical_gradient_level_ind' )
818	READ ( 13 ) vg_vertical_gradient_level_ind
819	CASE ( 'virtual_flight' )
820	READ ( 13 ) virtual_flight
821	CASE ( 'vnest_init' )
822	READ ( 13 ) vnest_init
823	CASE ( 'volume_flow_area' )
824	READ ( 13 ) volume_flow_area
825	CASE ( 'volume_flow_initial' )
826	READ ( 13 ) volume_flow_initial
827	CASE ( 'wall_adjustment' )
828	READ ( 13 ) wall_adjustment
829	CASE ( 'subs_vertical_gradient' )
830	READ ( 13 ) subs_vertical_gradient
831	CASE ( 'subs_vertical_gradient_level' )
832	READ ( 13 ) subs_vertical_gradient_level
833	CASE ( 'subs_vertical_gradient_level_i' )
834	READ ( 13 ) subs_vertical_gradient_level_i
835	CASE ( 'wall_heatflux' )
836	READ ( 13 ) wall_heatflux
837	CASE ( 'wall_humidityflux' )
838	READ ( 13 ) wall_humidityflux
839	CASE ( 'wall_scalarflux' )
840	READ ( 13 ) wall_scalarflux
841	CASE ( 'wall_salinityflux' )
842	READ ( 13 ) wall_salinityflux
843	CASE ( 'w_max' )
844	READ ( 13 ) w_max
845	CASE ( 'w_max_ijk' )
846	READ ( 13 ) w_max_ijk
847	CASE ( 'y_shift' )
848	READ ( 13 ) y_shift
849	CASE ( 'zeta_max' )
850	READ ( 13 ) zeta_max
851	CASE ( 'zeta_min' )
852	READ ( 13 ) zeta_min
853	CASE ( 'z0h_factor' )
854	READ ( 13 ) z0h_factor
855
856	CASE DEFAULT
857	WRITE( message_string, * ) 'unknown variable named "', &
858	TRIM( variable_chr ), '" found in', &
859	' data from prior run on PE ', myid
860	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
861	END SELECT
862	!
863	!-- Read next string
864	READ ( 13 ) variable_chr
865
866	ENDDO
867
868
869	END SUBROUTINE read_var_list
870
871
872
873	!------------------------------------------------------------------------------!
874	! Description:
875	! ------------
876	!> Skipping the global control variables from restart-file (binary format)
877	!> except some information needed when reading restart data from a previous
878	!> run which used a smaller total domain or/and a different domain decomposition.
879	!------------------------------------------------------------------------------!
880
881	SUBROUTINE read_parts_of_var_list
882
883
884	USE arrays_3d, &
885	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
886
887	USE control_parameters
888
889	USE indices, &
890	ONLY: nz, nx, nx_on_file, ny, ny_on_file
891
892	USE kinds
893
894	USE pegrid
895
896	USE statistics, &
897	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
898	v_max, v_max_ijk, w_max, w_max_ijk
899
900	IMPLICIT NONE
901
902	CHARACTER (LEN=10) :: version_on_file
903	CHARACTER (LEN=20) :: momentum_advec_check
904	CHARACTER (LEN=20) :: scalar_advec_check
905	CHARACTER (LEN=30) :: variable_chr
906	CHARACTER (LEN=1) :: cdum
907
908	INTEGER(iwp) :: max_pr_user_on_file
909	INTEGER(iwp) :: nz_on_file
910	INTEGER(iwp) :: statistic_regions_on_file
911	INTEGER(iwp) :: tmp_mpru
912	INTEGER(iwp) :: tmp_sr
913
914	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
915	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
916
917
918	CALL check_open( 13 )
919
920	READ ( 13 ) version_on_file
921
922
923	!
924	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
925	!-- run
926	READ ( 13 ) variable_chr
927	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
928	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
929	'run on PE ', myid
930	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
931	ENDIF
932	READ ( 13 ) numprocs_previous_run
933
934	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
935	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
936	ENDIF
937
938	READ ( 13 ) variable_chr
939	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
940	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
941	'prior run on PE ', myid
942	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
943	ENDIF
944	READ ( 13 ) hor_index_bounds_previous_run
945
946	!
947	!-- Read vertical number of gridpoints and number of different areas used
948	!-- for computing statistics. Allocate arrays depending on these values,
949	!-- which are needed for the following read instructions.
950	READ ( 13 ) variable_chr
951	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
952	message_string = 'nz not found in restart data file'
953	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
954	ENDIF
955	READ ( 13 ) nz_on_file
956	IF ( nz_on_file /= nz ) THEN
957	WRITE( message_string, * ) 'mismatch concerning number of ', &
958	'gridpoints along z', &
959	'&nz on file = "', nz_on_file, '"', &
960	'&nz from run = "', nz, '"'
961	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
962	ENDIF
963
964	READ ( 13 ) variable_chr
965	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
966	message_string = 'max_pr_user not found in restart data file'
967	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
968	ENDIF
969	READ ( 13 ) max_pr_user_on_file
970	IF ( max_pr_user_on_file /= max_pr_user ) THEN
971	WRITE( message_string, * ) 'number of user profiles on res', &
972	'tart data file differs from the current ', &
973	'run&max_pr_user on file = "', &
974	max_pr_user_on_file, '"', &
975	'&max_pr_user from run = "', &
976	max_pr_user, '"'
977	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
978	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
979	ELSE
980	tmp_mpru = max_pr_user
981	ENDIF
982
983	READ ( 13 ) variable_chr
984	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
985	message_string = 'statistic_regions not found in restart data file'
986	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
987	ENDIF
988	READ ( 13 ) statistic_regions_on_file
989	IF ( statistic_regions_on_file /= statistic_regions ) THEN
990	WRITE( message_string, * ) 'statistic regions on restart data file ',&
991	'differ from the current run', &
992	'&statistic regions on file = "', &
993	statistic_regions_on_file, '"', &
994	'&statistic regions from run = "', &
995	statistic_regions, '"', &
996	'&statistic data may be lost!'
997	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
998	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
999	ELSE
1000	tmp_sr = statistic_regions
1001	ENDIF
1002
1003	!
1004	!-- Now read and check some control parameters and skip the rest
1005	READ ( 13 ) variable_chr
1006
1007	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
1008
1009	SELECT CASE ( TRIM( variable_chr ) )
1010
1011	CASE ( 'average_count_pr' )
1012	READ ( 13 ) average_count_pr
1013	IF ( average_count_pr /= 0 ) THEN
1014	WRITE( message_string, * ) 'inflow profiles not temporally ', &
1015	'averaged. &Averaging will be done now using ', &
1016	average_count_pr, ' samples.'
1017	CALL message( 'read_parts_of_var_list', 'PA0309', &
1018	0, 1, 0, 6, 0 )
1019	ENDIF
1020
1021	CASE ( 'hom' )
1022	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
1023	0:statistic_regions_on_file) )
1024	READ ( 13 ) hom_on_file
1025	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
1026	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
1027	DEALLOCATE( hom_on_file )
1028
1029	CASE ( 'hom_sum' )
1030	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
1031	0:statistic_regions_on_file) )
1032	READ ( 13 ) hom_sum_on_file
1033	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
1034	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
1035	DEALLOCATE( hom_sum_on_file )
1036
1037	CASE ( 'momentum_advec' )
1038	momentum_advec_check = momentum_advec
1039	READ ( 13 ) momentum_advec
1040	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
1041	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
1042	'differs from momentum_advec of the initial run.'
1043	CALL message( 'read_parts_of_var_list', 'PA0100', &
1044	1, 2, 0, 6, 0 )
1045	END IF
1046
1047	CASE ( 'nx' )
1048	READ ( 13 ) nx_on_file
1049
1050	CASE ( 'ny' )
1051	READ ( 13 ) ny_on_file
1052
1053	CASE ( 'ref_state' )
1054	READ ( 13 ) ref_state
1055
1056	CASE ( 'scalar_advec' )
1057	scalar_advec_check = scalar_advec
1058	READ ( 13 ) scalar_advec
1059	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
1060	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
1061	'differs from scalar_advec of the initial run.'
1062	CALL message( 'read_parts_of_var_list', 'PA0101', &
1063	1, 2, 0, 6, 0 )
1064	END IF
1065
1066	CASE DEFAULT
1067
1068	READ ( 13 ) cdum
1069
1070	END SELECT
1071
1072	READ ( 13 ) variable_chr
1073
1074	ENDDO
1075
1076	!
1077	!-- Calculate the temporal average of vertical profiles, if neccessary
1078	IF ( average_count_pr /= 0 ) THEN
1079	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
1080	ENDIF
1081
1082
1083	END SUBROUTINE read_parts_of_var_list
1084
1085
1086
1087	!------------------------------------------------------------------------------!
1088	! Description:
1089	! ------------
1090	!> Skipping the global control variables from restart-file (binary format)
1091	!------------------------------------------------------------------------------!
1092
1093	SUBROUTINE skip_var_list
1094
1095	USE control_parameters, &
1096	ONLY: wind_turbine, virtual_flight, synthetic_turbulence_generator
1097
1098	USE wind_turbine_model_mod, &
1099	ONLY: wtm_skip_var_list
1100
1101	USE flight_mod, &
1102	ONLY: flight_skip_var_list
1103
1104	USE synthetic_turbulence_generator_mod, &
1105	ONLY: stg_skip_var_list
1106
1107
1108	IMPLICIT NONE
1109
1110	CHARACTER (LEN=10) :: version_on_file
1111	CHARACTER (LEN=30) :: variable_chr
1112
1113	CHARACTER (LEN=1) :: cdum
1114
1115
1116	READ ( 13 ) version_on_file
1117
1118	READ ( 13 ) variable_chr
1119
1120	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
1121
1122	READ ( 13 ) cdum
1123	READ ( 13 ) variable_chr
1124
1125	ENDDO
1126
1127	!
1128	!-- In case of virtual flights, skip also variables related to
1129	!-- this module.
1130	IF ( wind_turbine ) CALL wtm_skip_var_list
1131
1132	!
1133	!-- In case of virtual flights, skip also variables related to
1134	!-- this module.
1135	IF ( virtual_flight ) CALL flight_skip_var_list
1136
1137	!
1138	!-- In case of virtual flights, skip also variables related to
1139	!-- this module.
1140	IF ( synthetic_turbulence_generator ) CALL stg_skip_var_list
1141
1142
1143	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |