Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 833

Last change on this file since 833 was 826, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.2 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 826 2012-02-19 03:41:34Z maronga $
11	!
12	! 824 2012-02-17 09:09:57Z raasch
13	! +curvature_solution_effects
14	!
15	! 626 2010-12-10 13:04:12Z suehring
16	! idum replaced by cdum in read_parts_of_var_list
17	!
18	! 622 2010-12-10 08:08:13Z raasch
19	! +collective_wait
20	!
21	! 600 2010-11-24 16:10:51Z raasch
22	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
23	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
24	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
25	! in routine skip_var_list (end of this file), variable ldum is replaced
26	! by cdum(LEN=1), because otherwise read errors (too few data on file)
27	! appear due to one of the additional parameters (cycle_mg) which are now
28	! stored on the restart file
29	!
30	! 591 2010-10-28 06:35:52Z helmke
31	! remove print command
32	!
33	! 587 2010-10-27 08:36:51Z helmke
34	! +time_domask
35	!
36	! 580 2010-10-05 13:59:11Z heinze
37	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
38	! ws_vertical_gradient_level to subs_vertical_gradient_level and
39	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
40	!
41	! 411 2009-12-11 14:15:58Z heinze
42	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
43	! ws_vertical_gradient_level_ind
44	!
45	! 345 2009-07-01 14:37:56Z heinze
46	! +output_for_t0
47	! dt_fixed is read into a dummy variable.
48	! Output of messages replaced by message handling routine.
49	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
50	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
51	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
52	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
53	!
54	! 216 2008-11-25 07:12:43Z raasch
55	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
56	!
57	! 173 2008-05-23 20:39:38Z raasch
58	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
59	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
60	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
61	! recycling_width, turbulent_inflow,
62	! -cross_ts_*, npex, npey,
63	! hom_sum, volume_flow_area, volume_flow_initial moved from
64	! read_3d_binary to here,
65	! routines read_parts_of_var_list and skip_var_list added at the end
66	!
67	! 138 2007-11-28 10:03:58Z letzel
68	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
69	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
70	! plant_canopy, time_sort_particles
71	!
72	! 102 2007-07-27 09:09:17Z raasch
73	! +time_coupling, top_momentumflux_u\|v
74	!
75	! 95 2007-06-02 16:48:38Z raasch
76	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
77	! sa_vertical_gradient_level, bottom/top_salinity_flux
78	!
79	! 87 2007-05-22 15:46:47Z raasch
80	! +max_pr_user (version 3.1), var_hom renamed pr_palm
81	!
82	! 75 2007-03-22 09:54:05Z raasch
83	! +loop_optimization, pt_reference, moisture renamed humidity
84	!
85	! 20 2007-02-26 00:12:32Z raasch
86	! +top_heatflux, use_top_fluxes
87	!
88	! RCS Log replace by Id keyword, revision history cleaned up
89	!
90	! Revision 1.34 2006/08/22 14:14:27 raasch
91	! +dz_max
92	!
93	! Revision 1.1 1998/03/18 20:18:48 raasch
94	! Initial revision
95	!
96	!
97	! Description:
98	! ------------
99	! Reading values of global control variables from restart-file (binary format)
100	!------------------------------------------------------------------------------!
101
102	USE arrays_3d
103	USE averaging
104	USE cloud_parameters
105	USE control_parameters
106	USE grid_variables
107	USE indices
108	USE model_1d
109	USE netcdf_control
110	USE particle_attributes
111	USE pegrid
112	USE profil_parameter
113	USE statistics
114
115	IMPLICIT NONE
116
117	CHARACTER (LEN=10) :: binary_version, version_on_file
118	CHARACTER (LEN=30) :: variable_chr
119
120	LOGICAL :: ldum
121
122
123	CALL check_open( 13 )
124
125	!
126	!-- Make version number check first
127	READ ( 13 ) version_on_file
128	binary_version = '3.5'
129	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
130	WRITE( message_string, * ) 'version mismatch concerning control ', &
131	'variables', &
132	'&version on file = "', &
133	TRIM( version_on_file ), '"', &
134	'&version on program = "', &
135	TRIM( binary_version ), '"'
136	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
137	ENDIF
138
139	!
140	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
141	!-- run
142	READ ( 13 ) variable_chr
143	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
144	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
145	'run on PE ', myid
146	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
147	ENDIF
148	READ ( 13 ) numprocs_previous_run
149
150	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
151	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
152	ENDIF
153
154	READ ( 13 ) variable_chr
155	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
156	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
157	'prior run on PE ', myid
158	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
159	ENDIF
160	READ ( 13 ) hor_index_bounds_previous_run
161
162	!
163	!-- Read vertical number of gridpoints and number of different areas used
164	!-- for computing statistics. Allocate arrays depending on these values,
165	!-- which are needed for the following read instructions.
166	READ ( 13 ) variable_chr
167	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
168	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
169	myid
170	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
171	ENDIF
172	READ ( 13 ) nz
173
174	READ ( 13 ) variable_chr
175	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
176	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
177	'prior run on PE ', myid
178	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
179	ENDIF
180	READ ( 13 ) max_pr_user ! This value is checked against the number of
181	! user profiles given for the current run
182	! in routine user_parin (it has to match)
183
184	READ ( 13 ) variable_chr
185	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
186	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
187	'prior run on PE ', myid
188	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
189	ENDIF
190	READ ( 13 ) statistic_regions
191	IF ( .NOT. ALLOCATED( ug ) ) THEN
192	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
193	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
194	sa_init(0:nz+1), &
195	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
196	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
197	ENDIF
198
199	!
200	!-- Now read all control parameters:
201	!-- Caution: When the following read instructions have been changed, the
202	!-- ------- version number stored in the variable binary_version has to be
203	!-- increased. The same changes must also be done in write_var_list.
204	READ ( 13 ) variable_chr
205	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
206
207	SELECT CASE ( TRIM( variable_chr ) )
208
209	CASE ( 'adjust_mixing_length' )
210	READ ( 13 ) adjust_mixing_length
211	CASE ( 'advected_distance_x' )
212	READ ( 13 ) advected_distance_x
213	CASE ( 'advected_distance_y' )
214	READ ( 13 ) advected_distance_y
215	CASE ( 'alpha_surface' )
216	READ ( 13 ) alpha_surface
217	CASE ( 'average_count_pr' )
218	READ ( 13 ) average_count_pr
219	CASE ( 'average_count_sp' )
220	READ ( 13 ) average_count_sp
221	CASE ( 'average_count_3d' )
222	READ ( 13 ) average_count_3d
223	CASE ( 'bc_e_b' )
224	READ ( 13 ) bc_e_b
225	CASE ( 'bc_lr' )
226	READ ( 13 ) bc_lr
227	CASE ( 'bc_ns' )
228	READ ( 13 ) bc_ns
229	CASE ( 'bc_p_b' )
230	READ ( 13 ) bc_p_b
231	CASE ( 'bc_p_t' )
232	READ ( 13 ) bc_p_t
233	CASE ( 'bc_pt_b' )
234	READ ( 13 ) bc_pt_b
235	CASE ( 'bc_pt_t' )
236	READ ( 13 ) bc_pt_t
237	CASE ( 'bc_pt_t_val' )
238	READ ( 13 ) bc_pt_t_val
239	CASE ( 'bc_q_b' )
240	READ ( 13 ) bc_q_b
241	CASE ( 'bc_q_t' )
242	READ ( 13 ) bc_q_t
243	CASE ( 'bc_q_t_val' )
244	READ ( 13 ) bc_q_t_val
245	CASE ( 'bc_s_b' )
246	READ ( 13 ) bc_s_b
247	CASE ( 'bc_s_t' )
248	READ ( 13 ) bc_s_t
249	CASE ( 'bc_sa_t' )
250	READ ( 13 ) bc_sa_t
251	CASE ( 'bc_uv_b' )
252	READ ( 13 ) bc_uv_b
253	CASE ( 'bc_uv_t' )
254	READ ( 13 ) bc_uv_t
255	CASE ( 'bottom_salinityflux' )
256	READ ( 13 ) bottom_salinityflux
257	CASE ( 'building_height' )
258	READ ( 13 ) building_height
259	CASE ( 'building_length_x' )
260	READ ( 13 ) building_length_x
261	CASE ( 'building_length_y' )
262	READ ( 13 ) building_length_y
263	CASE ( 'building_wall_left' )
264	READ ( 13 ) building_wall_left
265	CASE ( 'building_wall_south' )
266	READ ( 13 ) building_wall_south
267	CASE ( 'call_psolver_at_all_substeps' )
268	READ ( 13 ) call_psolver_at_all_substeps
269	CASE ( 'canopy_mode' )
270	READ ( 13 ) canopy_mode
271	CASE ( 'canyon_height' )
272	READ ( 13 ) canyon_height
273	CASE ( 'canyon_width_x' )
274	READ ( 13 ) canyon_width_x
275	CASE ( 'canyon_width_y' )
276	READ ( 13 ) canyon_width_y
277	CASE ( 'canyon_wall_left' )
278	READ ( 13 ) canyon_wall_left
279	CASE ( 'canyon_wall_south' )
280	READ ( 13 ) canyon_wall_south
281	CASE ( 'cfl_factor' )
282	READ ( 13 ) cfl_factor
283	CASE ( 'cloud_droplets' )
284	READ ( 13 ) cloud_droplets
285	CASE ( 'cloud_physics' )
286	READ ( 13 ) cloud_physics
287	CASE ( 'collective_wait' )
288	READ ( 13 ) collective_wait
289	CASE ( 'conserve_volume_flow' )
290	READ ( 13 ) conserve_volume_flow
291	CASE ( 'conserve_volume_flow_mode' )
292	READ ( 13 ) conserve_volume_flow_mode
293	CASE ( 'coupling_start_time' )
294	READ ( 13 ) coupling_start_time
295	CASE ( 'cthf' )
296	READ ( 13 ) cthf
297	CASE ( 'current_timestep_number' )
298	READ ( 13 ) current_timestep_number
299	CASE ( 'curvature_solution_effects' )
300	READ ( 13 ) curvature_solution_effects
301	CASE ( 'cut_spline_overshoot' )
302	READ ( 13 ) cut_spline_overshoot
303	CASE ( 'cycle_mg' )
304	READ ( 13 ) cycle_mg
305	CASE ( 'damp_level_1d' )
306	READ ( 13 ) damp_level_1d
307	CASE ( 'dissipation_1d' )
308	READ ( 13 ) dissipation_1d
309	CASE ( 'dp_external' )
310	READ ( 13 ) dp_external
311	CASE ( 'dp_level_b' )
312	READ ( 13 ) dp_level_b
313	CASE ( 'dp_smooth' )
314	READ ( 13 ) dp_smooth
315	CASE ( 'dpdxy' )
316	READ ( 13 ) dpdxy
317	CASE ( 'drag_coefficient' )
318	READ ( 13 ) drag_coefficient
319	CASE ( 'dt_fixed' )
320	READ ( 13 ) ldum ! restart files created before rev 333
321	! contained dt_fixed by mistake; it is still
322	! read here in order to allow usage of these
323	! older restart files; can be removed in a
324	! later version
325	CASE ( 'dt_pr_1d' )
326	READ ( 13 ) dt_pr_1d
327	CASE ( 'dt_run_control_1d' )
328	READ ( 13 ) dt_run_control_1d
329	CASE ( 'dt_3d' )
330	READ ( 13 ) dt_3d
331	CASE ( 'dvrp_filecount' )
332	READ ( 13 ) dvrp_filecount
333	CASE ( 'dx' )
334	READ ( 13 ) dx
335	CASE ( 'dy' )
336	READ ( 13 ) dy
337	CASE ( 'dz' )
338	READ ( 13 ) dz
339	CASE ( 'dz_max' )
340	READ ( 13 ) dz_max
341	CASE ( 'dz_stretch_factor' )
342	READ ( 13 ) dz_stretch_factor
343	CASE ( 'dz_stretch_level' )
344	READ ( 13 ) dz_stretch_level
345	CASE ( 'e_min' )
346	READ ( 13 ) e_min
347	CASE ( 'end_time_1d' )
348	READ ( 13 ) end_time_1d
349	CASE ( 'fft_method' )
350	READ ( 13 ) fft_method
351	CASE ( 'first_call_advec_particles' )
352	READ ( 13 ) first_call_advec_particles
353	CASE ( 'galilei_transformation' )
354	READ ( 13 ) galilei_transformation
355	CASE ( 'grid_matching' )
356	READ ( 13 ) grid_matching
357	CASE ( 'hom' )
358	READ ( 13 ) hom
359	CASE ( 'hom_sum' )
360	READ ( 13 ) hom_sum
361	CASE ( 'humidity' )
362	READ ( 13 ) humidity
363	CASE ( 'inflow_damping_factor' )
364	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
365	ALLOCATE( inflow_damping_factor(0:nz+1) )
366	ENDIF
367	READ ( 13 ) inflow_damping_factor
368	CASE ( 'inflow_damping_height' )
369	READ ( 13 ) inflow_damping_height
370	CASE ( 'inflow_damping_width' )
371	READ ( 13 ) inflow_damping_width
372	CASE ( 'inflow_disturbance_begin' )
373	READ ( 13 ) inflow_disturbance_begin
374	CASE ( 'inflow_disturbance_end' )
375	READ ( 13 ) inflow_disturbance_end
376	CASE ( 'km_constant' )
377	READ ( 13 ) km_constant
378	CASE ( 'km_damp_max' )
379	READ ( 13 ) km_damp_max
380	CASE ( 'lad' )
381	READ ( 13 ) lad
382	CASE ( 'lad_surface' )
383	READ ( 13 ) lad_surface
384	CASE ( 'lad_vertical_gradient' )
385	READ ( 13 ) lad_vertical_gradient
386	CASE ( 'lad_vertical_gradient_level' )
387	READ ( 13 ) lad_vertical_gradient_level
388	CASE ( 'lad_vertical_gradient_level_in' )
389	READ ( 13 ) lad_vertical_gradient_level_ind
390	CASE ( 'last_dt_change' )
391	READ ( 13 ) last_dt_change
392	CASE ( 'large_scale_subsidence' )
393	READ ( 13 ) large_scale_subsidence
394	CASE ( 'leaf_surface_concentration' )
395	READ ( 13 ) leaf_surface_concentration
396	CASE ( 'long_filter_factor' )
397	READ ( 13 ) long_filter_factor
398	CASE ( 'loop_optimization' )
399	READ ( 13 ) loop_optimization
400	CASE ( 'mean_inflow_profiles' )
401	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
402	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
403	ENDIF
404	READ ( 13 ) mean_inflow_profiles
405	CASE ( 'mg_cycles' )
406	READ ( 13 ) mg_cycles
407	CASE ( 'mg_switch_to_pe0_level' )
408	READ ( 13 ) mg_switch_to_pe0_level
409	CASE ( 'mixing_length_1d' )
410	READ ( 13 ) mixing_length_1d
411	CASE ( 'momentum_advec' )
412	READ ( 13 ) momentum_advec
413	CASE ( 'netcdf_precision' )
414	READ ( 13 ) netcdf_precision
415	CASE ( 'ngsrb' )
416	READ ( 13 ) ngsrb
417	CASE ( 'nsor' )
418	READ ( 13 ) nsor
419	CASE ( 'nsor_ini' )
420	READ ( 13 ) nsor_ini
421	CASE ( 'nx' )
422	READ ( 13 ) nx
423	nx_on_file = nx
424	CASE ( 'ny' )
425	READ ( 13 ) ny
426	ny_on_file = ny
427	CASE ( 'ocean' )
428	READ ( 13 ) ocean
429	CASE ( 'old_dt' )
430	READ ( 13 ) old_dt
431	CASE ( 'omega' )
432	READ ( 13 ) omega
433	CASE ( 'omega_sor' )
434	READ ( 13 ) omega_sor
435	CASE ( 'outflow_damping_width' )
436	READ ( 13 ) outflow_damping_width
437	CASE ( 'output_for_t0' )
438	READ (13) output_for_t0
439	CASE ( 'overshoot_limit_e' )
440	READ ( 13 ) overshoot_limit_e
441	CASE ( 'overshoot_limit_pt' )
442	READ ( 13 ) overshoot_limit_pt
443	CASE ( 'overshoot_limit_u' )
444	READ ( 13 ) overshoot_limit_u
445	CASE ( 'overshoot_limit_v' )
446	READ ( 13 ) overshoot_limit_v
447	CASE ( 'overshoot_limit_w' )
448	READ ( 13 ) overshoot_limit_w
449	CASE ( 'passive_scalar' )
450	READ ( 13 ) passive_scalar
451	CASE ( 'pch_index' )
452	READ ( 13 ) pch_index
453	CASE ( 'phi' )
454	READ ( 13 ) phi
455	CASE ( 'plant_canopy' )
456	READ ( 13 ) plant_canopy
457	CASE ( 'prandtl_layer' )
458	READ ( 13 ) prandtl_layer
459	CASE ( 'prandtl_number' )
460	READ ( 13 ) prandtl_number
461	CASE ( 'precipitation' )
462	READ ( 13 ) precipitation
463	CASE ( 'psolver' )
464	READ ( 13 ) psolver
465	CASE ( 'pt_init' )
466	READ ( 13 ) pt_init
467	CASE ( 'pt_reference' )
468	READ ( 13 ) pt_reference
469	CASE ( 'pt_surface' )
470	READ ( 13 ) pt_surface
471	CASE ( 'pt_surface_initial_change' )
472	READ ( 13 ) pt_surface_initial_change
473	CASE ( 'pt_vertical_gradient' )
474	READ ( 13 ) pt_vertical_gradient
475	CASE ( 'pt_vertical_gradient_level' )
476	READ ( 13 ) pt_vertical_gradient_level
477	CASE ( 'pt_vertical_gradient_level_ind' )
478	READ ( 13 ) pt_vertical_gradient_level_ind
479	CASE ( 'q_init' )
480	READ ( 13 ) q_init
481	CASE ( 'q_surface' )
482	READ ( 13 ) q_surface
483	CASE ( 'q_surface_initial_change' )
484	READ ( 13 ) q_surface_initial_change
485	CASE ( 'q_vertical_gradient' )
486	READ ( 13 ) q_vertical_gradient
487	CASE ( 'q_vertical_gradient_level' )
488	READ ( 13 ) q_vertical_gradient_level
489	CASE ( 'q_vertical_gradient_level_ind' )
490	READ ( 13 ) q_vertical_gradient_level_ind
491	CASE ( 'radiation' )
492	READ ( 13 ) radiation
493	CASE ( 'random_generator' )
494	READ ( 13 ) random_generator
495	CASE ( 'random_heatflux' )
496	READ ( 13 ) random_heatflux
497	CASE ( 'rayleigh_damping_factor' )
498	READ ( 13 ) rayleigh_damping_factor
499	CASE ( 'rayleigh_damping_height' )
500	READ ( 13 ) rayleigh_damping_height
501	CASE ( 'recycling_width' )
502	READ ( 13 ) recycling_width
503	CASE ( 'residual_limit' )
504	READ ( 13 ) residual_limit
505	CASE ( 'rif_max' )
506	READ ( 13 ) rif_max
507	CASE ( 'rif_min' )
508	READ ( 13 ) rif_min
509	CASE ( 'roughness_length' )
510	READ ( 13 ) roughness_length
511	CASE ( 'runnr' )
512	READ ( 13 ) runnr
513	CASE ( 'run_coupled' )
514	READ ( 13 ) run_coupled
515	CASE ( 'sa_init' )
516	READ ( 13 ) sa_init
517	CASE ( 'sa_surface' )
518	READ ( 13 ) sa_surface
519	CASE ( 'sa_vertical_gradient' )
520	READ ( 13 ) sa_vertical_gradient
521	CASE ( 'sa_vertical_gradient_level' )
522	READ ( 13 ) sa_vertical_gradient_level
523	CASE ( 'scalar_advec' )
524	READ ( 13 ) scalar_advec
525	CASE ( 'scalar_exchange_coefficient' )
526	READ ( 13 ) scalar_exchange_coefficient
527	CASE ( 'simulated_time' )
528	READ ( 13 ) simulated_time
529	CASE ( 'surface_heatflux' )
530	READ ( 13 ) surface_heatflux
531	CASE ( 'surface_pressure' )
532	READ ( 13 ) surface_pressure
533	CASE ( 'surface_scalarflux' )
534	READ ( 13 ) surface_scalarflux
535	CASE ( 'surface_waterflux' )
536	READ ( 13 ) surface_waterflux
537	CASE ( 's_surface' )
538	READ ( 13 ) s_surface
539	CASE ( 's_surface_initial_change' )
540	READ ( 13 ) s_surface_initial_change
541	CASE ( 's_vertical_gradient' )
542	READ ( 13 ) s_vertical_gradient
543	CASE ( 's_vertical_gradient_level' )
544	READ ( 13 ) s_vertical_gradient_level
545	CASE ( 'time_coupling' )
546	READ ( 13 ) time_coupling
547	CASE ( 'time_disturb' )
548	READ ( 13 ) time_disturb
549	CASE ( 'time_dopr' )
550	READ ( 13 ) time_dopr
551	CASE ( 'time_domask' )
552	READ ( 13 ) time_domask
553	CASE ( 'time_dopr_av' )
554	READ ( 13 ) time_dopr_av
555	CASE ( 'time_dopr_listing' )
556	READ ( 13 ) time_dopr_listing
557	CASE ( 'time_dopts' )
558	READ ( 13 ) time_dopts
559	CASE ( 'time_dosp' )
560	READ ( 13 ) time_dosp
561	CASE ( 'time_dots' )
562	READ ( 13 ) time_dots
563	CASE ( 'time_do2d_xy' )
564	READ ( 13 ) time_do2d_xy
565	CASE ( 'time_do2d_xz' )
566	READ ( 13 ) time_do2d_xz
567	CASE ( 'time_do2d_yz' )
568	READ ( 13 ) time_do2d_yz
569	CASE ( 'time_do3d' )
570	READ ( 13 ) time_do3d
571	CASE ( 'time_do_av' )
572	READ ( 13 ) time_do_av
573	CASE ( 'time_do_sla' )
574	READ ( 13 ) time_do_sla
575	CASE ( 'time_dvrp' )
576	READ ( 13 ) time_dvrp
577	CASE ( 'time_restart' )
578	READ ( 13 ) time_restart
579	CASE ( 'time_run_control' )
580	READ ( 13 ) time_run_control
581	CASE ( 'time_since_reference_point' )
582	READ ( 13 ) time_since_reference_point
583	CASE ( 'time_sort_particles' )
584	READ ( 13 ) time_sort_particles
585	CASE ( 'timestep_scheme' )
586	READ ( 13 ) timestep_scheme
587	CASE ( 'topography' )
588	READ ( 13 ) topography
589	CASE ( 'topography_grid_convention' )
590	READ ( 13 ) topography_grid_convention
591	CASE ( 'top_heatflux' )
592	READ ( 13 ) top_heatflux
593	CASE ( 'top_momentumflux_u' )
594	READ ( 13 ) top_momentumflux_u
595	CASE ( 'top_momentumflux_v' )
596	READ ( 13 ) top_momentumflux_v
597	CASE ( 'top_salinityflux' )
598	READ ( 13 ) top_salinityflux
599	CASE ( 'tsc' )
600	READ ( 13 ) tsc
601	CASE ( 'turbulent_inflow' )
602	READ ( 13 ) turbulent_inflow
603	CASE ( 'u_bulk' )
604	READ ( 13 ) u_bulk
605	CASE ( 'u_init' )
606	READ ( 13 ) u_init
607	CASE ( 'u_max' )
608	READ ( 13 ) u_max
609	CASE ( 'u_max_ijk' )
610	READ ( 13 ) u_max_ijk
611	CASE ( 'ug' )
612	READ ( 13 ) ug
613	CASE ( 'ug_surface' )
614	READ ( 13 ) ug_surface
615	CASE ( 'ug_vertical_gradient' )
616	READ ( 13 ) ug_vertical_gradient
617	CASE ( 'ug_vertical_gradient_level' )
618	READ ( 13 ) ug_vertical_gradient_level
619	CASE ( 'ug_vertical_gradient_level_ind' )
620	READ ( 13 ) ug_vertical_gradient_level_ind
621	CASE ( 'ups_limit_e' )
622	READ ( 13 ) ups_limit_e
623	CASE ( 'ups_limit_pt' )
624	READ ( 13 ) ups_limit_pt
625	CASE ( 'ups_limit_u' )
626	READ ( 13 ) ups_limit_u
627	CASE ( 'ups_limit_v' )
628	READ ( 13 ) ups_limit_v
629	CASE ( 'ups_limit_w' )
630	READ ( 13 ) ups_limit_w
631	CASE ( 'use_surface_fluxes' )
632	READ ( 13 ) use_surface_fluxes
633	CASE ( 'use_top_fluxes' )
634	READ ( 13 ) use_top_fluxes
635	CASE ( 'use_ug_for_galilei_tr' )
636	READ ( 13 ) use_ug_for_galilei_tr
637	CASE ( 'use_upstream_for_tke' )
638	READ ( 13 ) use_upstream_for_tke
639	CASE ( 'v_bulk' )
640	READ ( 13 ) v_bulk
641	CASE ( 'v_init' )
642	READ ( 13 ) v_init
643	CASE ( 'v_max' )
644	READ ( 13 ) v_max
645	CASE ( 'v_max_ijk' )
646	READ ( 13 ) v_max_ijk
647	CASE ( 'vg' )
648	READ ( 13 ) vg
649	CASE ( 'vg_surface' )
650	READ ( 13 ) vg_surface
651	CASE ( 'vg_vertical_gradient' )
652	READ ( 13 ) vg_vertical_gradient
653	CASE ( 'vg_vertical_gradient_level' )
654	READ ( 13 ) vg_vertical_gradient_level
655	CASE ( 'vg_vertical_gradient_level_ind' )
656	READ ( 13 ) vg_vertical_gradient_level_ind
657	CASE ( 'volume_flow_area' )
658	READ ( 13 ) volume_flow_area
659	CASE ( 'volume_flow_initial' )
660	READ ( 13 ) volume_flow_initial
661	CASE ( 'wall_adjustment' )
662	READ ( 13 ) wall_adjustment
663	CASE ( 'subs_vertical_gradient' )
664	READ ( 13 ) subs_vertical_gradient
665	CASE ( 'subs_vertical_gradient_level' )
666	READ ( 13 ) subs_vertical_gradient_level
667	CASE ( 'subs_vertical_gradient_level_i' )
668	READ ( 13 ) subs_vertical_gradient_level_i
669	CASE ( 'w_max' )
670	READ ( 13 ) w_max
671	CASE ( 'w_max_ijk' )
672	READ ( 13 ) w_max_ijk
673
674	CASE DEFAULT
675	WRITE( message_string, * ) 'unknown variable named "', &
676	TRIM( variable_chr ), '" found in', &
677	' data from prior run on PE ', myid
678	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
679	END SELECT
680	!
681	!-- Read next string
682	READ ( 13 ) variable_chr
683
684	ENDDO
685
686
687	END SUBROUTINE read_var_list
688
689
690
691	SUBROUTINE read_parts_of_var_list
692
693	!------------------------------------------------------------------------------!
694	! Description:
695	! ------------
696	! Skipping the global control variables from restart-file (binary format)
697	! except some informations needed when reading restart data from a previous
698	! run which used a smaller total domain or/and a different domain decomposition.
699	!------------------------------------------------------------------------------!
700
701	USE arrays_3d
702	USE control_parameters
703	USE indices
704	USE pegrid
705	USE statistics
706
707	IMPLICIT NONE
708
709	CHARACTER (LEN=10) :: version_on_file
710	CHARACTER (LEN=30) :: variable_chr
711	CHARACTER (LEN=1) :: cdum
712
713	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
714	statistic_regions_on_file, tmp_mpru, tmp_sr
715
716	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
717	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
718
719
720	CALL check_open( 13 )
721
722	WRITE (9,*) 'rpovl: after check open 13'
723	CALL local_flush( 9 )
724	READ ( 13 ) version_on_file
725
726	!
727	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
728	!-- run
729	READ ( 13 ) variable_chr
730	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
731	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
732	'run on PE ', myid
733	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
734	ENDIF
735	READ ( 13 ) numprocs_previous_run
736
737	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
738	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
739	ENDIF
740
741	READ ( 13 ) variable_chr
742	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
743	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
744	'prior run on PE ', myid
745	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
746	ENDIF
747	READ ( 13 ) hor_index_bounds_previous_run
748
749	!
750	!-- Read vertical number of gridpoints and number of different areas used
751	!-- for computing statistics. Allocate arrays depending on these values,
752	!-- which are needed for the following read instructions.
753	READ ( 13 ) variable_chr
754	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
755	message_string = 'nz not found in restart data file'
756	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
757	ENDIF
758	READ ( 13 ) nz_on_file
759	IF ( nz_on_file /= nz ) THEN
760	WRITE( message_string, * ) 'mismatch concerning number of ', &
761	'gridpoints along z', &
762	'&nz on file = "', nz_on_file, '"', &
763	'&nz from run = "', nz, '"'
764	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
765	ENDIF
766
767	READ ( 13 ) variable_chr
768	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
769	message_string = 'max_pr_user not found in restart data file'
770	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
771	ENDIF
772	READ ( 13 ) max_pr_user_on_file
773	IF ( max_pr_user_on_file /= max_pr_user ) THEN
774	WRITE( message_string, * ) 'number of user profiles on res', &
775	'tart data file differs from the current ', &
776	'run&max_pr_user on file = "', &
777	max_pr_user_on_file, '"', &
778	'&max_pr_user from run = "', &
779	max_pr_user, '"'
780	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
781	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
782	ELSE
783	tmp_mpru = max_pr_user
784	ENDIF
785
786	READ ( 13 ) variable_chr
787	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
788	message_string = 'statistic_regions not found in restart data file'
789	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
790	ENDIF
791	READ ( 13 ) statistic_regions_on_file
792	IF ( statistic_regions_on_file /= statistic_regions ) THEN
793	WRITE( message_string, * ) 'statistic regions on restart data file ',&
794	'differ from the current run', &
795	'&statistic regions on file = "', &
796	statistic_regions_on_file, '"', &
797	'&statistic regions from run = "', &
798	statistic_regions, '"', &
799	'&statistic data may be lost!'
800	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
801	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
802	ELSE
803	tmp_sr = statistic_regions
804	ENDIF
805
806
807	!
808	!-- Now read and check some control parameters and skip the rest
809	WRITE (9,*) 'wpovl: begin reading variables'
810	CALL local_flush( 9 )
811	READ ( 13 ) variable_chr
812
813	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
814
815	SELECT CASE ( TRIM( variable_chr ) )
816
817	CASE ( 'average_count_pr' )
818	READ ( 13 ) average_count_pr
819	IF ( average_count_pr /= 0 ) THEN
820	WRITE( message_string, * ) 'inflow profiles not temporally ', &
821	'averaged. &Averaging will be done now using ', &
822	average_count_pr, ' samples.'
823	CALL message( 'read_parts_of_var_list', 'PA0309', &
824	0, 1, 0, 6, 0 )
825	ENDIF
826
827	CASE ( 'hom' )
828	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
829	0:statistic_regions_on_file) )
830	READ ( 13 ) hom_on_file
831	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
832	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
833	DEALLOCATE( hom_on_file )
834
835	CASE ( 'hom_sum' )
836	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
837	0:statistic_regions_on_file) )
838	READ ( 13 ) hom_sum_on_file
839	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
840	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
841	DEALLOCATE( hom_sum_on_file )
842
843	CASE ( 'nx' )
844	READ ( 13 ) nx_on_file
845
846	CASE ( 'ny' )
847	READ ( 13 ) ny_on_file
848
849
850	CASE DEFAULT
851
852	READ ( 13 ) cdum
853
854	END SELECT
855
856	READ ( 13 ) variable_chr
857
858	ENDDO
859
860	!
861	!-- Calculate the temporal average of vertical profiles, if neccessary
862	IF ( average_count_pr /= 0 ) THEN
863	hom_sum = hom_sum / REAL( average_count_pr )
864	ENDIF
865
866
867	END SUBROUTINE read_parts_of_var_list
868
869
870
871	SUBROUTINE skip_var_list
872
873	!------------------------------------------------------------------------------!
874	! Description:
875	! ------------
876	! Skipping the global control variables from restart-file (binary format)
877	!------------------------------------------------------------------------------!
878
879	IMPLICIT NONE
880
881	CHARACTER (LEN=10) :: version_on_file
882	CHARACTER (LEN=30) :: variable_chr
883
884	CHARACTER (LEN=1) :: cdum
885
886
887	WRITE (9,*) 'skipvl #1'
888	CALL local_flush( 9 )
889	READ ( 13 ) version_on_file
890
891	WRITE (9,*) 'skipvl before variable_chr'
892	CALL local_flush( 9 )
893	READ ( 13 ) variable_chr
894	WRITE (9,*) 'skipvl after variable_chr'
895	CALL local_flush( 9 )
896
897	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
898
899	WRITE (9,*) 'skipvl chr = ', variable_chr
900	CALL local_flush( 9 )
901	READ ( 13 ) cdum
902	READ ( 13 ) variable_chr
903
904	ENDDO
905	WRITE (9,*) 'skipvl last'
906	CALL local_flush( 9 )
907
908
909	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |