Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 734

Last change on this file since 734 was 627, checked in by suehring, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.0 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 627 2010-12-10 13:07:59Z raasch $
11	!
12	! 626 2010-12-10 13:04:12Z suehring
13	! idum replaced by cdum in read_parts_of_var_list
14	!
15	! 622 2010-12-10 08:08:13Z raasch
16	! +collective_wait
17	!
18	! 600 2010-11-24 16:10:51Z raasch
19	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
20	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
21	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
22	! in routine skip_var_list (end of this file), variable ldum is replaced
23	! by cdum(LEN=1), because otherwise read errors (too few data on file)
24	! appear due to one of the additional parameters (cycle_mg) which are now
25	! stored on the restart file
26	!
27	! 591 2010-10-28 06:35:52Z helmke
28	! remove print command
29	!
30	! 587 2010-10-27 08:36:51Z helmke
31	! +time_domask
32	!
33	! 580 2010-10-05 13:59:11Z heinze
34	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
35	! ws_vertical_gradient_level to subs_vertical_gradient_level and
36	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
37	!
38	! 411 2009-12-11 14:15:58Z heinze
39	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
40	! ws_vertical_gradient_level_ind
41	!
42	! 345 2009-07-01 14:37:56Z heinze
43	! +output_for_t0
44	! dt_fixed is read into a dummy variable.
45	! Output of messages replaced by message handling routine.
46	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
47	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
48	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
49	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
50	!
51	! 216 2008-11-25 07:12:43Z raasch
52	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
53	!
54	! 173 2008-05-23 20:39:38Z raasch
55	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
56	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
57	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
58	! recycling_width, turbulent_inflow,
59	! -cross_ts_*, npex, npey,
60	! hom_sum, volume_flow_area, volume_flow_initial moved from
61	! read_3d_binary to here,
62	! routines read_parts_of_var_list and skip_var_list added at the end
63	!
64	! 138 2007-11-28 10:03:58Z letzel
65	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
66	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
67	! plant_canopy, time_sort_particles
68	!
69	! 102 2007-07-27 09:09:17Z raasch
70	! +time_coupling, top_momentumflux_u\|v
71	!
72	! 95 2007-06-02 16:48:38Z raasch
73	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
74	! sa_vertical_gradient_level, bottom/top_salinity_flux
75	!
76	! 87 2007-05-22 15:46:47Z raasch
77	! +max_pr_user (version 3.1), var_hom renamed pr_palm
78	!
79	! 75 2007-03-22 09:54:05Z raasch
80	! +loop_optimization, pt_reference, moisture renamed humidity
81	!
82	! 20 2007-02-26 00:12:32Z raasch
83	! +top_heatflux, use_top_fluxes
84	!
85	! RCS Log replace by Id keyword, revision history cleaned up
86	!
87	! Revision 1.34 2006/08/22 14:14:27 raasch
88	! +dz_max
89	!
90	! Revision 1.1 1998/03/18 20:18:48 raasch
91	! Initial revision
92	!
93	!
94	! Description:
95	! ------------
96	! Reading values of global control variables from restart-file (binary format)
97	!------------------------------------------------------------------------------!
98
99	USE arrays_3d
100	USE averaging
101	USE control_parameters
102	USE grid_variables
103	USE indices
104	USE model_1d
105	USE netcdf_control
106	USE particle_attributes
107	USE pegrid
108	USE profil_parameter
109	USE statistics
110
111	IMPLICIT NONE
112
113	CHARACTER (LEN=10) :: binary_version, version_on_file
114	CHARACTER (LEN=30) :: variable_chr
115
116	LOGICAL :: ldum
117
118
119	CALL check_open( 13 )
120
121	!
122	!-- Make version number check first
123	READ ( 13 ) version_on_file
124	binary_version = '3.5'
125	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
126	WRITE( message_string, * ) 'version mismatch concerning control ', &
127	'variables', &
128	'&version on file = "', &
129	TRIM( version_on_file ), '"', &
130	'&version on program = "', &
131	TRIM( binary_version ), '"'
132	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
133	ENDIF
134
135	!
136	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
137	!-- run
138	READ ( 13 ) variable_chr
139	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
140	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
141	'run on PE ', myid
142	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
143	ENDIF
144	READ ( 13 ) numprocs_previous_run
145
146	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
147	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
148	ENDIF
149
150	READ ( 13 ) variable_chr
151	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
152	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
153	'prior run on PE ', myid
154	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
155	ENDIF
156	READ ( 13 ) hor_index_bounds_previous_run
157
158	!
159	!-- Read vertical number of gridpoints and number of different areas used
160	!-- for computing statistics. Allocate arrays depending on these values,
161	!-- which are needed for the following read instructions.
162	READ ( 13 ) variable_chr
163	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
164	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
165	myid
166	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
167	ENDIF
168	READ ( 13 ) nz
169
170	READ ( 13 ) variable_chr
171	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
172	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
173	'prior run on PE ', myid
174	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
175	ENDIF
176	READ ( 13 ) max_pr_user ! This value is checked against the number of
177	! user profiles given for the current run
178	! in routine user_parin (it has to match)
179
180	READ ( 13 ) variable_chr
181	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
182	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
183	'prior run on PE ', myid
184	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
185	ENDIF
186	READ ( 13 ) statistic_regions
187	IF ( .NOT. ALLOCATED( ug ) ) THEN
188	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
189	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
190	sa_init(0:nz+1), &
191	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
192	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
193	ENDIF
194
195	!
196	!-- Now read all control parameters:
197	!-- Caution: When the following read instructions have been changed, the
198	!-- ------- version number stored in the variable binary_version has to be
199	!-- increased. The same changes must also be done in write_var_list.
200	READ ( 13 ) variable_chr
201	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
202
203	SELECT CASE ( TRIM( variable_chr ) )
204
205	CASE ( 'adjust_mixing_length' )
206	READ ( 13 ) adjust_mixing_length
207	CASE ( 'advected_distance_x' )
208	READ ( 13 ) advected_distance_x
209	CASE ( 'advected_distance_y' )
210	READ ( 13 ) advected_distance_y
211	CASE ( 'alpha_surface' )
212	READ ( 13 ) alpha_surface
213	CASE ( 'average_count_pr' )
214	READ ( 13 ) average_count_pr
215	CASE ( 'average_count_sp' )
216	READ ( 13 ) average_count_sp
217	CASE ( 'average_count_3d' )
218	READ ( 13 ) average_count_3d
219	CASE ( 'bc_e_b' )
220	READ ( 13 ) bc_e_b
221	CASE ( 'bc_lr' )
222	READ ( 13 ) bc_lr
223	CASE ( 'bc_ns' )
224	READ ( 13 ) bc_ns
225	CASE ( 'bc_p_b' )
226	READ ( 13 ) bc_p_b
227	CASE ( 'bc_p_t' )
228	READ ( 13 ) bc_p_t
229	CASE ( 'bc_pt_b' )
230	READ ( 13 ) bc_pt_b
231	CASE ( 'bc_pt_t' )
232	READ ( 13 ) bc_pt_t
233	CASE ( 'bc_pt_t_val' )
234	READ ( 13 ) bc_pt_t_val
235	CASE ( 'bc_q_b' )
236	READ ( 13 ) bc_q_b
237	CASE ( 'bc_q_t' )
238	READ ( 13 ) bc_q_t
239	CASE ( 'bc_q_t_val' )
240	READ ( 13 ) bc_q_t_val
241	CASE ( 'bc_s_b' )
242	READ ( 13 ) bc_s_b
243	CASE ( 'bc_s_t' )
244	READ ( 13 ) bc_s_t
245	CASE ( 'bc_sa_t' )
246	READ ( 13 ) bc_sa_t
247	CASE ( 'bc_uv_b' )
248	READ ( 13 ) bc_uv_b
249	CASE ( 'bc_uv_t' )
250	READ ( 13 ) bc_uv_t
251	CASE ( 'bottom_salinityflux' )
252	READ ( 13 ) bottom_salinityflux
253	CASE ( 'building_height' )
254	READ ( 13 ) building_height
255	CASE ( 'building_length_x' )
256	READ ( 13 ) building_length_x
257	CASE ( 'building_length_y' )
258	READ ( 13 ) building_length_y
259	CASE ( 'building_wall_left' )
260	READ ( 13 ) building_wall_left
261	CASE ( 'building_wall_south' )
262	READ ( 13 ) building_wall_south
263	CASE ( 'call_psolver_at_all_substeps' )
264	READ ( 13 ) call_psolver_at_all_substeps
265	CASE ( 'canopy_mode' )
266	READ ( 13 ) canopy_mode
267	CASE ( 'canyon_height' )
268	READ ( 13 ) canyon_height
269	CASE ( 'canyon_width_x' )
270	READ ( 13 ) canyon_width_x
271	CASE ( 'canyon_width_y' )
272	READ ( 13 ) canyon_width_y
273	CASE ( 'canyon_wall_left' )
274	READ ( 13 ) canyon_wall_left
275	CASE ( 'canyon_wall_south' )
276	READ ( 13 ) canyon_wall_south
277	CASE ( 'cfl_factor' )
278	READ ( 13 ) cfl_factor
279	CASE ( 'cloud_droplets' )
280	READ ( 13 ) cloud_droplets
281	CASE ( 'cloud_physics' )
282	READ ( 13 ) cloud_physics
283	CASE ( 'collective_wait' )
284	READ ( 13 ) collective_wait
285	CASE ( 'conserve_volume_flow' )
286	READ ( 13 ) conserve_volume_flow
287	CASE ( 'conserve_volume_flow_mode' )
288	READ ( 13 ) conserve_volume_flow_mode
289	CASE ( 'coupling_start_time' )
290	READ ( 13 ) coupling_start_time
291	CASE ( 'cthf' )
292	READ ( 13 ) cthf
293	CASE ( 'current_timestep_number' )
294	READ ( 13 ) current_timestep_number
295	CASE ( 'cut_spline_overshoot' )
296	READ ( 13 ) cut_spline_overshoot
297	CASE ( 'cycle_mg' )
298	READ ( 13 ) cycle_mg
299	CASE ( 'damp_level_1d' )
300	READ ( 13 ) damp_level_1d
301	CASE ( 'dissipation_1d' )
302	READ ( 13 ) dissipation_1d
303	CASE ( 'dp_external' )
304	READ ( 13 ) dp_external
305	CASE ( 'dp_level_b' )
306	READ ( 13 ) dp_level_b
307	CASE ( 'dp_smooth' )
308	READ ( 13 ) dp_smooth
309	CASE ( 'dpdxy' )
310	READ ( 13 ) dpdxy
311	CASE ( 'drag_coefficient' )
312	READ ( 13 ) drag_coefficient
313	CASE ( 'dt_fixed' )
314	READ ( 13 ) ldum ! restart files created before rev 333
315	! contained dt_fixed by mistake; it is still
316	! read here in order to allow usage of these
317	! older restart files; can be removed in a
318	! later version
319	CASE ( 'dt_pr_1d' )
320	READ ( 13 ) dt_pr_1d
321	CASE ( 'dt_run_control_1d' )
322	READ ( 13 ) dt_run_control_1d
323	CASE ( 'dt_3d' )
324	READ ( 13 ) dt_3d
325	CASE ( 'dvrp_filecount' )
326	READ ( 13 ) dvrp_filecount
327	CASE ( 'dx' )
328	READ ( 13 ) dx
329	CASE ( 'dy' )
330	READ ( 13 ) dy
331	CASE ( 'dz' )
332	READ ( 13 ) dz
333	CASE ( 'dz_max' )
334	READ ( 13 ) dz_max
335	CASE ( 'dz_stretch_factor' )
336	READ ( 13 ) dz_stretch_factor
337	CASE ( 'dz_stretch_level' )
338	READ ( 13 ) dz_stretch_level
339	CASE ( 'e_min' )
340	READ ( 13 ) e_min
341	CASE ( 'end_time_1d' )
342	READ ( 13 ) end_time_1d
343	CASE ( 'fft_method' )
344	READ ( 13 ) fft_method
345	CASE ( 'first_call_advec_particles' )
346	READ ( 13 ) first_call_advec_particles
347	CASE ( 'galilei_transformation' )
348	READ ( 13 ) galilei_transformation
349	CASE ( 'grid_matching' )
350	READ ( 13 ) grid_matching
351	CASE ( 'hom' )
352	READ ( 13 ) hom
353	CASE ( 'hom_sum' )
354	READ ( 13 ) hom_sum
355	CASE ( 'humidity' )
356	READ ( 13 ) humidity
357	CASE ( 'inflow_damping_factor' )
358	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
359	ALLOCATE( inflow_damping_factor(0:nz+1) )
360	ENDIF
361	READ ( 13 ) inflow_damping_factor
362	CASE ( 'inflow_damping_height' )
363	READ ( 13 ) inflow_damping_height
364	CASE ( 'inflow_damping_width' )
365	READ ( 13 ) inflow_damping_width
366	CASE ( 'inflow_disturbance_begin' )
367	READ ( 13 ) inflow_disturbance_begin
368	CASE ( 'inflow_disturbance_end' )
369	READ ( 13 ) inflow_disturbance_end
370	CASE ( 'km_constant' )
371	READ ( 13 ) km_constant
372	CASE ( 'km_damp_max' )
373	READ ( 13 ) km_damp_max
374	CASE ( 'lad' )
375	READ ( 13 ) lad
376	CASE ( 'lad_surface' )
377	READ ( 13 ) lad_surface
378	CASE ( 'lad_vertical_gradient' )
379	READ ( 13 ) lad_vertical_gradient
380	CASE ( 'lad_vertical_gradient_level' )
381	READ ( 13 ) lad_vertical_gradient_level
382	CASE ( 'lad_vertical_gradient_level_in' )
383	READ ( 13 ) lad_vertical_gradient_level_ind
384	CASE ( 'last_dt_change' )
385	READ ( 13 ) last_dt_change
386	CASE ( 'large_scale_subsidence' )
387	READ ( 13 ) large_scale_subsidence
388	CASE ( 'leaf_surface_concentration' )
389	READ ( 13 ) leaf_surface_concentration
390	CASE ( 'long_filter_factor' )
391	READ ( 13 ) long_filter_factor
392	CASE ( 'loop_optimization' )
393	READ ( 13 ) loop_optimization
394	CASE ( 'mean_inflow_profiles' )
395	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
396	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
397	ENDIF
398	READ ( 13 ) mean_inflow_profiles
399	CASE ( 'mg_cycles' )
400	READ ( 13 ) mg_cycles
401	CASE ( 'mg_switch_to_pe0_level' )
402	READ ( 13 ) mg_switch_to_pe0_level
403	CASE ( 'mixing_length_1d' )
404	READ ( 13 ) mixing_length_1d
405	CASE ( 'momentum_advec' )
406	READ ( 13 ) momentum_advec
407	CASE ( 'netcdf_precision' )
408	READ ( 13 ) netcdf_precision
409	CASE ( 'ngsrb' )
410	READ ( 13 ) ngsrb
411	CASE ( 'nsor' )
412	READ ( 13 ) nsor
413	CASE ( 'nsor_ini' )
414	READ ( 13 ) nsor_ini
415	CASE ( 'nx' )
416	READ ( 13 ) nx
417	nx_on_file = nx
418	CASE ( 'ny' )
419	READ ( 13 ) ny
420	ny_on_file = ny
421	CASE ( 'ocean' )
422	READ ( 13 ) ocean
423	CASE ( 'old_dt' )
424	READ ( 13 ) old_dt
425	CASE ( 'omega' )
426	READ ( 13 ) omega
427	CASE ( 'omega_sor' )
428	READ ( 13 ) omega_sor
429	CASE ( 'outflow_damping_width' )
430	READ ( 13 ) outflow_damping_width
431	CASE ( 'output_for_t0' )
432	READ (13) output_for_t0
433	CASE ( 'overshoot_limit_e' )
434	READ ( 13 ) overshoot_limit_e
435	CASE ( 'overshoot_limit_pt' )
436	READ ( 13 ) overshoot_limit_pt
437	CASE ( 'overshoot_limit_u' )
438	READ ( 13 ) overshoot_limit_u
439	CASE ( 'overshoot_limit_v' )
440	READ ( 13 ) overshoot_limit_v
441	CASE ( 'overshoot_limit_w' )
442	READ ( 13 ) overshoot_limit_w
443	CASE ( 'passive_scalar' )
444	READ ( 13 ) passive_scalar
445	CASE ( 'pch_index' )
446	READ ( 13 ) pch_index
447	CASE ( 'phi' )
448	READ ( 13 ) phi
449	CASE ( 'plant_canopy' )
450	READ ( 13 ) plant_canopy
451	CASE ( 'prandtl_layer' )
452	READ ( 13 ) prandtl_layer
453	CASE ( 'prandtl_number' )
454	READ ( 13 ) prandtl_number
455	CASE ( 'precipitation' )
456	READ ( 13 ) precipitation
457	CASE ( 'psolver' )
458	READ ( 13 ) psolver
459	CASE ( 'pt_init' )
460	READ ( 13 ) pt_init
461	CASE ( 'pt_reference' )
462	READ ( 13 ) pt_reference
463	CASE ( 'pt_surface' )
464	READ ( 13 ) pt_surface
465	CASE ( 'pt_surface_initial_change' )
466	READ ( 13 ) pt_surface_initial_change
467	CASE ( 'pt_vertical_gradient' )
468	READ ( 13 ) pt_vertical_gradient
469	CASE ( 'pt_vertical_gradient_level' )
470	READ ( 13 ) pt_vertical_gradient_level
471	CASE ( 'pt_vertical_gradient_level_ind' )
472	READ ( 13 ) pt_vertical_gradient_level_ind
473	CASE ( 'q_init' )
474	READ ( 13 ) q_init
475	CASE ( 'q_surface' )
476	READ ( 13 ) q_surface
477	CASE ( 'q_surface_initial_change' )
478	READ ( 13 ) q_surface_initial_change
479	CASE ( 'q_vertical_gradient' )
480	READ ( 13 ) q_vertical_gradient
481	CASE ( 'q_vertical_gradient_level' )
482	READ ( 13 ) q_vertical_gradient_level
483	CASE ( 'q_vertical_gradient_level_ind' )
484	READ ( 13 ) q_vertical_gradient_level_ind
485	CASE ( 'radiation' )
486	READ ( 13 ) radiation
487	CASE ( 'random_generator' )
488	READ ( 13 ) random_generator
489	CASE ( 'random_heatflux' )
490	READ ( 13 ) random_heatflux
491	CASE ( 'rayleigh_damping_factor' )
492	READ ( 13 ) rayleigh_damping_factor
493	CASE ( 'rayleigh_damping_height' )
494	READ ( 13 ) rayleigh_damping_height
495	CASE ( 'recycling_width' )
496	READ ( 13 ) recycling_width
497	CASE ( 'residual_limit' )
498	READ ( 13 ) residual_limit
499	CASE ( 'rif_max' )
500	READ ( 13 ) rif_max
501	CASE ( 'rif_min' )
502	READ ( 13 ) rif_min
503	CASE ( 'roughness_length' )
504	READ ( 13 ) roughness_length
505	CASE ( 'runnr' )
506	READ ( 13 ) runnr
507	CASE ( 'run_coupled' )
508	READ ( 13 ) run_coupled
509	CASE ( 'sa_init' )
510	READ ( 13 ) sa_init
511	CASE ( 'sa_surface' )
512	READ ( 13 ) sa_surface
513	CASE ( 'sa_vertical_gradient' )
514	READ ( 13 ) sa_vertical_gradient
515	CASE ( 'sa_vertical_gradient_level' )
516	READ ( 13 ) sa_vertical_gradient_level
517	CASE ( 'scalar_advec' )
518	READ ( 13 ) scalar_advec
519	CASE ( 'scalar_exchange_coefficient' )
520	READ ( 13 ) scalar_exchange_coefficient
521	CASE ( 'simulated_time' )
522	READ ( 13 ) simulated_time
523	CASE ( 'surface_heatflux' )
524	READ ( 13 ) surface_heatflux
525	CASE ( 'surface_pressure' )
526	READ ( 13 ) surface_pressure
527	CASE ( 'surface_scalarflux' )
528	READ ( 13 ) surface_scalarflux
529	CASE ( 'surface_waterflux' )
530	READ ( 13 ) surface_waterflux
531	CASE ( 's_surface' )
532	READ ( 13 ) s_surface
533	CASE ( 's_surface_initial_change' )
534	READ ( 13 ) s_surface_initial_change
535	CASE ( 's_vertical_gradient' )
536	READ ( 13 ) s_vertical_gradient
537	CASE ( 's_vertical_gradient_level' )
538	READ ( 13 ) s_vertical_gradient_level
539	CASE ( 'time_coupling' )
540	READ ( 13 ) time_coupling
541	CASE ( 'time_disturb' )
542	READ ( 13 ) time_disturb
543	CASE ( 'time_dopr' )
544	READ ( 13 ) time_dopr
545	CASE ( 'time_domask' )
546	READ ( 13 ) time_domask
547	CASE ( 'time_dopr_av' )
548	READ ( 13 ) time_dopr_av
549	CASE ( 'time_dopr_listing' )
550	READ ( 13 ) time_dopr_listing
551	CASE ( 'time_dopts' )
552	READ ( 13 ) time_dopts
553	CASE ( 'time_dosp' )
554	READ ( 13 ) time_dosp
555	CASE ( 'time_dots' )
556	READ ( 13 ) time_dots
557	CASE ( 'time_do2d_xy' )
558	READ ( 13 ) time_do2d_xy
559	CASE ( 'time_do2d_xz' )
560	READ ( 13 ) time_do2d_xz
561	CASE ( 'time_do2d_yz' )
562	READ ( 13 ) time_do2d_yz
563	CASE ( 'time_do3d' )
564	READ ( 13 ) time_do3d
565	CASE ( 'time_do_av' )
566	READ ( 13 ) time_do_av
567	CASE ( 'time_do_sla' )
568	READ ( 13 ) time_do_sla
569	CASE ( 'time_dvrp' )
570	READ ( 13 ) time_dvrp
571	CASE ( 'time_restart' )
572	READ ( 13 ) time_restart
573	CASE ( 'time_run_control' )
574	READ ( 13 ) time_run_control
575	CASE ( 'time_since_reference_point' )
576	READ ( 13 ) time_since_reference_point
577	CASE ( 'time_sort_particles' )
578	READ ( 13 ) time_sort_particles
579	CASE ( 'timestep_scheme' )
580	READ ( 13 ) timestep_scheme
581	CASE ( 'topography' )
582	READ ( 13 ) topography
583	CASE ( 'topography_grid_convention' )
584	READ ( 13 ) topography_grid_convention
585	CASE ( 'top_heatflux' )
586	READ ( 13 ) top_heatflux
587	CASE ( 'top_momentumflux_u' )
588	READ ( 13 ) top_momentumflux_u
589	CASE ( 'top_momentumflux_v' )
590	READ ( 13 ) top_momentumflux_v
591	CASE ( 'top_salinityflux' )
592	READ ( 13 ) top_salinityflux
593	CASE ( 'tsc' )
594	READ ( 13 ) tsc
595	CASE ( 'turbulent_inflow' )
596	READ ( 13 ) turbulent_inflow
597	CASE ( 'u_bulk' )
598	READ ( 13 ) u_bulk
599	CASE ( 'u_init' )
600	READ ( 13 ) u_init
601	CASE ( 'u_max' )
602	READ ( 13 ) u_max
603	CASE ( 'u_max_ijk' )
604	READ ( 13 ) u_max_ijk
605	CASE ( 'ug' )
606	READ ( 13 ) ug
607	CASE ( 'ug_surface' )
608	READ ( 13 ) ug_surface
609	CASE ( 'ug_vertical_gradient' )
610	READ ( 13 ) ug_vertical_gradient
611	CASE ( 'ug_vertical_gradient_level' )
612	READ ( 13 ) ug_vertical_gradient_level
613	CASE ( 'ug_vertical_gradient_level_ind' )
614	READ ( 13 ) ug_vertical_gradient_level_ind
615	CASE ( 'ups_limit_e' )
616	READ ( 13 ) ups_limit_e
617	CASE ( 'ups_limit_pt' )
618	READ ( 13 ) ups_limit_pt
619	CASE ( 'ups_limit_u' )
620	READ ( 13 ) ups_limit_u
621	CASE ( 'ups_limit_v' )
622	READ ( 13 ) ups_limit_v
623	CASE ( 'ups_limit_w' )
624	READ ( 13 ) ups_limit_w
625	CASE ( 'use_surface_fluxes' )
626	READ ( 13 ) use_surface_fluxes
627	CASE ( 'use_top_fluxes' )
628	READ ( 13 ) use_top_fluxes
629	CASE ( 'use_ug_for_galilei_tr' )
630	READ ( 13 ) use_ug_for_galilei_tr
631	CASE ( 'use_upstream_for_tke' )
632	READ ( 13 ) use_upstream_for_tke
633	CASE ( 'v_bulk' )
634	READ ( 13 ) v_bulk
635	CASE ( 'v_init' )
636	READ ( 13 ) v_init
637	CASE ( 'v_max' )
638	READ ( 13 ) v_max
639	CASE ( 'v_max_ijk' )
640	READ ( 13 ) v_max_ijk
641	CASE ( 'vg' )
642	READ ( 13 ) vg
643	CASE ( 'vg_surface' )
644	READ ( 13 ) vg_surface
645	CASE ( 'vg_vertical_gradient' )
646	READ ( 13 ) vg_vertical_gradient
647	CASE ( 'vg_vertical_gradient_level' )
648	READ ( 13 ) vg_vertical_gradient_level
649	CASE ( 'vg_vertical_gradient_level_ind' )
650	READ ( 13 ) vg_vertical_gradient_level_ind
651	CASE ( 'volume_flow_area' )
652	READ ( 13 ) volume_flow_area
653	CASE ( 'volume_flow_initial' )
654	READ ( 13 ) volume_flow_initial
655	CASE ( 'wall_adjustment' )
656	READ ( 13 ) wall_adjustment
657	CASE ( 'subs_vertical_gradient' )
658	READ ( 13 ) subs_vertical_gradient
659	CASE ( 'subs_vertical_gradient_level' )
660	READ ( 13 ) subs_vertical_gradient_level
661	CASE ( 'subs_vertical_gradient_level_i' )
662	READ ( 13 ) subs_vertical_gradient_level_i
663	CASE ( 'w_max' )
664	READ ( 13 ) w_max
665	CASE ( 'w_max_ijk' )
666	READ ( 13 ) w_max_ijk
667
668	CASE DEFAULT
669	WRITE( message_string, * ) 'unknown variable named "', &
670	TRIM( variable_chr ), '" found in', &
671	' data from prior run on PE ', myid
672	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
673	END SELECT
674	!
675	!-- Read next string
676	READ ( 13 ) variable_chr
677
678	ENDDO
679
680
681	END SUBROUTINE read_var_list
682
683
684
685	SUBROUTINE read_parts_of_var_list
686
687	!------------------------------------------------------------------------------!
688	! Description:
689	! ------------
690	! Skipping the global control variables from restart-file (binary format)
691	! except some informations needed when reading restart data from a previous
692	! run which used a smaller total domain or/and a different domain decomposition.
693	!------------------------------------------------------------------------------!
694
695	USE arrays_3d
696	USE control_parameters
697	USE indices
698	USE pegrid
699	USE statistics
700
701	IMPLICIT NONE
702
703	CHARACTER (LEN=10) :: version_on_file
704	CHARACTER (LEN=30) :: variable_chr
705	CHARACTER (LEN=1) :: cdum
706
707	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
708	statistic_regions_on_file, tmp_mpru, tmp_sr
709
710	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
711	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
712
713
714	CALL check_open( 13 )
715
716	WRITE (9,*) 'rpovl: after check open 13'
717	CALL local_flush( 9 )
718	READ ( 13 ) version_on_file
719
720	!
721	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
722	!-- run
723	READ ( 13 ) variable_chr
724	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
725	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
726	'run on PE ', myid
727	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
728	ENDIF
729	READ ( 13 ) numprocs_previous_run
730
731	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
732	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
733	ENDIF
734
735	READ ( 13 ) variable_chr
736	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
737	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
738	'prior run on PE ', myid
739	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
740	ENDIF
741	READ ( 13 ) hor_index_bounds_previous_run
742
743	!
744	!-- Read vertical number of gridpoints and number of different areas used
745	!-- for computing statistics. Allocate arrays depending on these values,
746	!-- which are needed for the following read instructions.
747	READ ( 13 ) variable_chr
748	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
749	message_string = 'nz not found in restart data file'
750	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
751	ENDIF
752	READ ( 13 ) nz_on_file
753	IF ( nz_on_file /= nz ) THEN
754	WRITE( message_string, * ) 'mismatch concerning number of ', &
755	'gridpoints along z', &
756	'&nz on file = "', nz_on_file, '"', &
757	'&nz from run = "', nz, '"'
758	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
759	ENDIF
760
761	READ ( 13 ) variable_chr
762	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
763	message_string = 'max_pr_user not found in restart data file'
764	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
765	ENDIF
766	READ ( 13 ) max_pr_user_on_file
767	IF ( max_pr_user_on_file /= max_pr_user ) THEN
768	WRITE( message_string, * ) 'number of user profiles on res', &
769	'tart data file differs from the current ', &
770	'run&max_pr_user on file = "', &
771	max_pr_user_on_file, '"', &
772	'&max_pr_user from run = "', &
773	max_pr_user, '"'
774	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
775	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
776	ELSE
777	tmp_mpru = max_pr_user
778	ENDIF
779
780	READ ( 13 ) variable_chr
781	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
782	message_string = 'statistic_regions not found in restart data file'
783	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
784	ENDIF
785	READ ( 13 ) statistic_regions_on_file
786	IF ( statistic_regions_on_file /= statistic_regions ) THEN
787	WRITE( message_string, * ) 'statistic regions on restart data file ',&
788	'differ from the current run', &
789	'&statistic regions on file = "', &
790	statistic_regions_on_file, '"', &
791	'&statistic regions from run = "', &
792	statistic_regions, '"', &
793	'&statistic data may be lost!'
794	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
795	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
796	ELSE
797	tmp_sr = statistic_regions
798	ENDIF
799
800
801	!
802	!-- Now read and check some control parameters and skip the rest
803	WRITE (9,*) 'wpovl: begin reading variables'
804	CALL local_flush( 9 )
805	READ ( 13 ) variable_chr
806
807	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
808
809	SELECT CASE ( TRIM( variable_chr ) )
810
811	CASE ( 'average_count_pr' )
812	READ ( 13 ) average_count_pr
813	IF ( average_count_pr /= 0 ) THEN
814	WRITE( message_string, * ) 'inflow profiles not temporally ', &
815	'averaged. &Averaging will be done now using ', &
816	average_count_pr, ' samples.'
817	CALL message( 'read_parts_of_var_list', 'PA0309', &
818	0, 1, 0, 6, 0 )
819	ENDIF
820
821	CASE ( 'hom' )
822	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
823	0:statistic_regions_on_file) )
824	READ ( 13 ) hom_on_file
825	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
826	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
827	DEALLOCATE( hom_on_file )
828
829	CASE ( 'hom_sum' )
830	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
831	0:statistic_regions_on_file) )
832	READ ( 13 ) hom_sum_on_file
833	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
834	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
835	DEALLOCATE( hom_sum_on_file )
836
837	CASE ( 'nx' )
838	READ ( 13 ) nx_on_file
839
840	CASE ( 'ny' )
841	READ ( 13 ) ny_on_file
842
843
844	CASE DEFAULT
845
846	READ ( 13 ) cdum
847
848	END SELECT
849
850	READ ( 13 ) variable_chr
851
852	ENDDO
853
854	!
855	!-- Calculate the temporal average of vertical profiles, if neccessary
856	IF ( average_count_pr /= 0 ) THEN
857	hom_sum = hom_sum / REAL( average_count_pr )
858	ENDIF
859
860
861	END SUBROUTINE read_parts_of_var_list
862
863
864
865	SUBROUTINE skip_var_list
866
867	!------------------------------------------------------------------------------!
868	! Description:
869	! ------------
870	! Skipping the global control variables from restart-file (binary format)
871	!------------------------------------------------------------------------------!
872
873	IMPLICIT NONE
874
875	CHARACTER (LEN=10) :: version_on_file
876	CHARACTER (LEN=30) :: variable_chr
877
878	CHARACTER (LEN=1) :: cdum
879
880
881	WRITE (9,*) 'skipvl #1'
882	CALL local_flush( 9 )
883	READ ( 13 ) version_on_file
884
885	WRITE (9,*) 'skipvl before variable_chr'
886	CALL local_flush( 9 )
887	READ ( 13 ) variable_chr
888	WRITE (9,*) 'skipvl after variable_chr'
889	CALL local_flush( 9 )
890
891	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
892
893	WRITE (9,*) 'skipvl chr = ', variable_chr
894	CALL local_flush( 9 )
895	READ ( 13 ) cdum
896	READ ( 13 ) variable_chr
897
898	ENDDO
899	WRITE (9,*) 'skipvl last'
900	CALL local_flush( 9 )
901
902
903	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |