Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 593

Last change on this file since 593 was 592, checked in by helmke, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 31.3 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 592 2010-10-28 06:39:22Z heinze $
11	!
12	! 591 2010-10-28 06:35:52Z helmke
13	! remove print command
14	!
15	! 587 2010-10-27 08:36:51Z helmke
16	! +time_domask
17	!
18	! 580 2010-10-05 13:59:11Z heinze
19	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
20	! ws_vertical_gradient_level to subs_vertical_gradient_level and
21	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
22	!
23	! 411 2009-12-11 14:15:58Z heinze
24	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
25	! ws_vertical_gradient_level_ind
26	!
27	! 345 2009-07-01 14:37:56Z heinze
28	! +output_for_t0
29	! dt_fixed is read into a dummy variable.
30	! Output of messages replaced by message handling routine.
31	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
32	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
33	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
34	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
35	!
36	! 216 2008-11-25 07:12:43Z raasch
37	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
38	!
39	! 173 2008-05-23 20:39:38Z raasch
40	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
41	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
42	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
43	! recycling_width, turbulent_inflow,
44	! -cross_ts_*, npex, npey,
45	! hom_sum, volume_flow_area, volume_flow_initial moved from
46	! read_3d_binary to here,
47	! routines read_parts_of_var_list and skip_var_list added at the end
48	!
49	! 138 2007-11-28 10:03:58Z letzel
50	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
51	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
52	! plant_canopy, time_sort_particles
53	!
54	! 102 2007-07-27 09:09:17Z raasch
55	! +time_coupling, top_momentumflux_u\|v
56	!
57	! 95 2007-06-02 16:48:38Z raasch
58	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
59	! sa_vertical_gradient_level, bottom/top_salinity_flux
60	!
61	! 87 2007-05-22 15:46:47Z raasch
62	! +max_pr_user (version 3.1), var_hom renamed pr_palm
63	!
64	! 75 2007-03-22 09:54:05Z raasch
65	! +loop_optimization, pt_reference, moisture renamed humidity
66	!
67	! 20 2007-02-26 00:12:32Z raasch
68	! +top_heatflux, use_top_fluxes
69	!
70	! RCS Log replace by Id keyword, revision history cleaned up
71	!
72	! Revision 1.34 2006/08/22 14:14:27 raasch
73	! +dz_max
74	!
75	! Revision 1.1 1998/03/18 20:18:48 raasch
76	! Initial revision
77	!
78	!
79	! Description:
80	! ------------
81	! Reading values of global control variables from restart-file (binary format)
82	!------------------------------------------------------------------------------!
83
84	USE arrays_3d
85	USE averaging
86	USE control_parameters
87	USE grid_variables
88	USE indices
89	USE model_1d
90	USE netcdf_control
91	USE particle_attributes
92	USE pegrid
93	USE profil_parameter
94	USE statistics
95
96	IMPLICIT NONE
97
98	CHARACTER (LEN=10) :: binary_version, version_on_file
99	CHARACTER (LEN=30) :: variable_chr
100
101	LOGICAL :: ldum
102
103
104	CALL check_open( 13 )
105
106	!
107	!-- Make version number check first
108	READ ( 13 ) version_on_file
109	binary_version = '3.4'
110	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
111	WRITE( message_string, * ) 'version mismatch concerning control ', &
112	'variables', &
113	'&version on file = "', &
114	TRIM( version_on_file ), '"', &
115	'&version on program = "', &
116	TRIM( binary_version ), '"'
117	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
118	ENDIF
119
120	!
121	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
122	!-- run
123	READ ( 13 ) variable_chr
124	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
125	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
126	'run on PE ', myid
127	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
128	ENDIF
129	READ ( 13 ) numprocs_previous_run
130
131	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
132	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
133	ENDIF
134
135	READ ( 13 ) variable_chr
136	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
137	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
138	'prior run on PE ', myid
139	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
140	ENDIF
141	READ ( 13 ) hor_index_bounds_previous_run
142
143	!
144	!-- Read vertical number of gridpoints and number of different areas used
145	!-- for computing statistics. Allocate arrays depending on these values,
146	!-- which are needed for the following read instructions.
147	READ ( 13 ) variable_chr
148	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
149	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
150	myid
151	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
152	ENDIF
153	READ ( 13 ) nz
154
155	READ ( 13 ) variable_chr
156	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
157	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
158	'prior run on PE ', myid
159	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
160	ENDIF
161	READ ( 13 ) max_pr_user ! This value is checked against the number of
162	! user profiles given for the current run
163	! in routine user_parin (it has to match)
164
165	READ ( 13 ) variable_chr
166	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
167	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
168	'prior run on PE ', myid
169	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
170	ENDIF
171	READ ( 13 ) statistic_regions
172	IF ( .NOT. ALLOCATED( ug ) ) THEN
173	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
174	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
175	sa_init(0:nz+1), &
176	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
177	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
178	ENDIF
179
180	!
181	!-- Now read all control parameters:
182	!-- Caution: When the following read instructions have been changed, the
183	!-- ------- version number stored in the variable binary_version has to be
184	!-- increased. The same changes must also be done in write_var_list.
185	READ ( 13 ) variable_chr
186	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
187
188	SELECT CASE ( TRIM( variable_chr ) )
189
190	CASE ( 'adjust_mixing_length' )
191	READ ( 13 ) adjust_mixing_length
192	CASE ( 'advected_distance_x' )
193	READ ( 13 ) advected_distance_x
194	CASE ( 'advected_distance_y' )
195	READ ( 13 ) advected_distance_y
196	CASE ( 'alpha_surface' )
197	READ ( 13 ) alpha_surface
198	CASE ( 'average_count_pr' )
199	READ ( 13 ) average_count_pr
200	CASE ( 'average_count_sp' )
201	READ ( 13 ) average_count_sp
202	CASE ( 'average_count_3d' )
203	READ ( 13 ) average_count_3d
204	CASE ( 'bc_e_b' )
205	READ ( 13 ) bc_e_b
206	CASE ( 'bc_lr' )
207	READ ( 13 ) bc_lr
208	CASE ( 'bc_ns' )
209	READ ( 13 ) bc_ns
210	CASE ( 'bc_p_b' )
211	READ ( 13 ) bc_p_b
212	CASE ( 'bc_p_t' )
213	READ ( 13 ) bc_p_t
214	CASE ( 'bc_pt_b' )
215	READ ( 13 ) bc_pt_b
216	CASE ( 'bc_pt_t' )
217	READ ( 13 ) bc_pt_t
218	CASE ( 'bc_pt_t_val' )
219	READ ( 13 ) bc_pt_t_val
220	CASE ( 'bc_q_b' )
221	READ ( 13 ) bc_q_b
222	CASE ( 'bc_q_t' )
223	READ ( 13 ) bc_q_t
224	CASE ( 'bc_q_t_val' )
225	READ ( 13 ) bc_q_t_val
226	CASE ( 'bc_s_b' )
227	READ ( 13 ) bc_s_b
228	CASE ( 'bc_s_t' )
229	READ ( 13 ) bc_s_t
230	CASE ( 'bc_sa_t' )
231	READ ( 13 ) bc_sa_t
232	CASE ( 'bc_uv_b' )
233	READ ( 13 ) bc_uv_b
234	CASE ( 'bc_uv_t' )
235	READ ( 13 ) bc_uv_t
236	CASE ( 'bottom_salinityflux' )
237	READ ( 13 ) bottom_salinityflux
238	CASE ( 'building_height' )
239	READ ( 13 ) building_height
240	CASE ( 'building_length_x' )
241	READ ( 13 ) building_length_x
242	CASE ( 'building_length_y' )
243	READ ( 13 ) building_length_y
244	CASE ( 'building_wall_left' )
245	READ ( 13 ) building_wall_left
246	CASE ( 'building_wall_south' )
247	READ ( 13 ) building_wall_south
248	CASE ( 'canopy_mode' )
249	READ ( 13 ) canopy_mode
250	CASE ( 'canyon_height' )
251	READ ( 13 ) canyon_height
252	CASE ( 'canyon_width_x' )
253	READ ( 13 ) canyon_width_x
254	CASE ( 'canyon_width_y' )
255	READ ( 13 ) canyon_width_y
256	CASE ( 'canyon_wall_left' )
257	READ ( 13 ) canyon_wall_left
258	CASE ( 'canyon_wall_south' )
259	READ ( 13 ) canyon_wall_south
260	CASE ( 'cloud_droplets' )
261	READ ( 13 ) cloud_droplets
262	CASE ( 'cloud_physics' )
263	READ ( 13 ) cloud_physics
264	CASE ( 'conserve_volume_flow' )
265	READ ( 13 ) conserve_volume_flow
266	CASE ( 'conserve_volume_flow_mode' )
267	READ ( 13 ) conserve_volume_flow_mode
268	CASE ( 'coupling_start_time' )
269	READ ( 13 ) coupling_start_time
270	CASE ( 'cthf' )
271	READ ( 13 ) cthf
272	CASE ( 'current_timestep_number' )
273	READ ( 13 ) current_timestep_number
274	CASE ( 'cut_spline_overshoot' )
275	READ ( 13 ) cut_spline_overshoot
276	CASE ( 'damp_level_1d' )
277	READ ( 13 ) damp_level_1d
278	CASE ( 'dissipation_1d' )
279	READ ( 13 ) dissipation_1d
280	CASE ( 'dp_external' )
281	READ ( 13 ) dp_external
282	CASE ( 'dp_level_b' )
283	READ ( 13 ) dp_level_b
284	CASE ( 'dp_smooth' )
285	READ ( 13 ) dp_smooth
286	CASE ( 'dpdxy' )
287	READ ( 13 ) dpdxy
288	CASE ( 'drag_coefficient' )
289	READ ( 13 ) drag_coefficient
290	CASE ( 'dt_fixed' )
291	READ ( 13 ) ldum ! restart files created before rev 333
292	! contained dt_fixed by mistake; it is still
293	! read here in order to allow usage of these
294	! older restart files; can be removed in a
295	! later version
296	CASE ( 'dt_pr_1d' )
297	READ ( 13 ) dt_pr_1d
298	CASE ( 'dt_run_control_1d' )
299	READ ( 13 ) dt_run_control_1d
300	CASE ( 'dt_3d' )
301	READ ( 13 ) dt_3d
302	CASE ( 'dvrp_filecount' )
303	READ ( 13 ) dvrp_filecount
304	CASE ( 'dx' )
305	READ ( 13 ) dx
306	CASE ( 'dy' )
307	READ ( 13 ) dy
308	CASE ( 'dz' )
309	READ ( 13 ) dz
310	CASE ( 'dz_max' )
311	READ ( 13 ) dz_max
312	CASE ( 'dz_stretch_factor' )
313	READ ( 13 ) dz_stretch_factor
314	CASE ( 'dz_stretch_level' )
315	READ ( 13 ) dz_stretch_level
316	CASE ( 'e_min' )
317	READ ( 13 ) e_min
318	CASE ( 'end_time_1d' )
319	READ ( 13 ) end_time_1d
320	CASE ( 'fft_method' )
321	READ ( 13 ) fft_method
322	CASE ( 'first_call_advec_particles' )
323	READ ( 13 ) first_call_advec_particles
324	CASE ( 'galilei_transformation' )
325	READ ( 13 ) galilei_transformation
326	CASE ( 'grid_matching' )
327	READ ( 13 ) grid_matching
328	CASE ( 'hom' )
329	READ ( 13 ) hom
330	CASE ( 'hom_sum' )
331	READ ( 13 ) hom_sum
332	CASE ( 'humidity' )
333	READ ( 13 ) humidity
334	CASE ( 'inflow_damping_factor' )
335	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
336	ALLOCATE( inflow_damping_factor(0:nz+1) )
337	ENDIF
338	READ ( 13 ) inflow_damping_factor
339	CASE ( 'inflow_damping_height' )
340	READ ( 13 ) inflow_damping_height
341	CASE ( 'inflow_damping_width' )
342	READ ( 13 ) inflow_damping_width
343	CASE ( 'inflow_disturbance_begin' )
344	READ ( 13 ) inflow_disturbance_begin
345	CASE ( 'inflow_disturbance_end' )
346	READ ( 13 ) inflow_disturbance_end
347	CASE ( 'km_constant' )
348	READ ( 13 ) km_constant
349	CASE ( 'km_damp_max' )
350	READ ( 13 ) km_damp_max
351	CASE ( 'lad' )
352	READ ( 13 ) lad
353	CASE ( 'lad_surface' )
354	READ ( 13 ) lad_surface
355	CASE ( 'lad_vertical_gradient' )
356	READ ( 13 ) lad_vertical_gradient
357	CASE ( 'lad_vertical_gradient_level' )
358	READ ( 13 ) lad_vertical_gradient_level
359	CASE ( 'lad_vertical_gradient_level_in' )
360	READ ( 13 ) lad_vertical_gradient_level_ind
361	CASE ( 'last_dt_change' )
362	READ ( 13 ) last_dt_change
363	CASE ( 'large_scale_subsidence' )
364	READ ( 13 ) large_scale_subsidence
365	CASE ( 'leaf_surface_concentration' )
366	READ ( 13 ) leaf_surface_concentration
367	CASE ( 'long_filter_factor' )
368	READ ( 13 ) long_filter_factor
369	CASE ( 'loop_optimization' )
370	READ ( 13 ) loop_optimization
371	CASE ( 'mean_inflow_profiles' )
372	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
373	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
374	ENDIF
375	READ ( 13 ) mean_inflow_profiles
376	CASE ( 'mixing_length_1d' )
377	READ ( 13 ) mixing_length_1d
378	CASE ( 'momentum_advec' )
379	READ ( 13 ) momentum_advec
380	CASE ( 'netcdf_precision' )
381	READ ( 13 ) netcdf_precision
382	CASE ( 'nsor_ini' )
383	READ ( 13 ) nsor_ini
384	CASE ( 'nx' )
385	READ ( 13 ) nx
386	nx_on_file = nx
387	CASE ( 'ny' )
388	READ ( 13 ) ny
389	ny_on_file = ny
390	CASE ( 'ocean' )
391	READ ( 13 ) ocean
392	CASE ( 'old_dt' )
393	READ ( 13 ) old_dt
394	CASE ( 'omega' )
395	READ ( 13 ) omega
396	CASE ( 'outflow_damping_width' )
397	READ ( 13 ) outflow_damping_width
398	CASE ( 'output_for_t0' )
399	READ (13) output_for_t0
400	CASE ( 'overshoot_limit_e' )
401	READ ( 13 ) overshoot_limit_e
402	CASE ( 'overshoot_limit_pt' )
403	READ ( 13 ) overshoot_limit_pt
404	CASE ( 'overshoot_limit_u' )
405	READ ( 13 ) overshoot_limit_u
406	CASE ( 'overshoot_limit_v' )
407	READ ( 13 ) overshoot_limit_v
408	CASE ( 'overshoot_limit_w' )
409	READ ( 13 ) overshoot_limit_w
410	CASE ( 'passive_scalar' )
411	READ ( 13 ) passive_scalar
412	CASE ( 'pch_index' )
413	READ ( 13 ) pch_index
414	CASE ( 'phi' )
415	READ ( 13 ) phi
416	CASE ( 'plant_canopy' )
417	READ ( 13 ) plant_canopy
418	CASE ( 'prandtl_layer' )
419	READ ( 13 ) prandtl_layer
420	CASE ( 'precipitation' )
421	READ ( 13 ) precipitation
422	CASE ( 'pt_init' )
423	READ ( 13 ) pt_init
424	CASE ( 'pt_reference' )
425	READ ( 13 ) pt_reference
426	CASE ( 'pt_surface' )
427	READ ( 13 ) pt_surface
428	CASE ( 'pt_surface_initial_change' )
429	READ ( 13 ) pt_surface_initial_change
430	CASE ( 'pt_vertical_gradient' )
431	READ ( 13 ) pt_vertical_gradient
432	CASE ( 'pt_vertical_gradient_level' )
433	READ ( 13 ) pt_vertical_gradient_level
434	CASE ( 'pt_vertical_gradient_level_ind' )
435	READ ( 13 ) pt_vertical_gradient_level_ind
436	CASE ( 'q_init' )
437	READ ( 13 ) q_init
438	CASE ( 'q_surface' )
439	READ ( 13 ) q_surface
440	CASE ( 'q_surface_initial_change' )
441	READ ( 13 ) q_surface_initial_change
442	CASE ( 'q_vertical_gradient' )
443	READ ( 13 ) q_vertical_gradient
444	CASE ( 'q_vertical_gradient_level' )
445	READ ( 13 ) q_vertical_gradient_level
446	CASE ( 'q_vertical_gradient_level_ind' )
447	READ ( 13 ) q_vertical_gradient_level_ind
448	CASE ( 'radiation' )
449	READ ( 13 ) radiation
450	CASE ( 'random_generator' )
451	READ ( 13 ) random_generator
452	CASE ( 'random_heatflux' )
453	READ ( 13 ) random_heatflux
454	CASE ( 'recycling_width' )
455	READ ( 13 ) recycling_width
456	CASE ( 'rif_max' )
457	READ ( 13 ) rif_max
458	CASE ( 'rif_min' )
459	READ ( 13 ) rif_min
460	CASE ( 'roughness_length' )
461	READ ( 13 ) roughness_length
462	CASE ( 'runnr' )
463	READ ( 13 ) runnr
464	CASE ( 'run_coupled' )
465	READ ( 13 ) run_coupled
466	CASE ( 'sa_init' )
467	READ ( 13 ) sa_init
468	CASE ( 'sa_surface' )
469	READ ( 13 ) sa_surface
470	CASE ( 'sa_vertical_gradient' )
471	READ ( 13 ) sa_vertical_gradient
472	CASE ( 'sa_vertical_gradient_level' )
473	READ ( 13 ) sa_vertical_gradient_level
474	CASE ( 'scalar_advec' )
475	READ ( 13 ) scalar_advec
476	CASE ( 'scalar_exchange_coefficient' )
477	READ ( 13 ) scalar_exchange_coefficient
478	CASE ( 'simulated_time' )
479	READ ( 13 ) simulated_time
480	CASE ( 'surface_heatflux' )
481	READ ( 13 ) surface_heatflux
482	CASE ( 'surface_pressure' )
483	READ ( 13 ) surface_pressure
484	CASE ( 'surface_scalarflux' )
485	READ ( 13 ) surface_scalarflux
486	CASE ( 'surface_waterflux' )
487	READ ( 13 ) surface_waterflux
488	CASE ( 's_surface' )
489	READ ( 13 ) s_surface
490	CASE ( 's_surface_initial_change' )
491	READ ( 13 ) s_surface_initial_change
492	CASE ( 's_vertical_gradient' )
493	READ ( 13 ) s_vertical_gradient
494	CASE ( 's_vertical_gradient_level' )
495	READ ( 13 ) s_vertical_gradient_level
496	CASE ( 'time_coupling' )
497	READ ( 13 ) time_coupling
498	CASE ( 'time_disturb' )
499	READ ( 13 ) time_disturb
500	CASE ( 'time_dopr' )
501	READ ( 13 ) time_dopr
502	CASE ( 'time_domask' )
503	READ ( 13 ) time_domask
504	CASE ( 'time_dopr_av' )
505	READ ( 13 ) time_dopr_av
506	CASE ( 'time_dopr_listing' )
507	READ ( 13 ) time_dopr_listing
508	CASE ( 'time_dopts' )
509	READ ( 13 ) time_dopts
510	CASE ( 'time_dosp' )
511	READ ( 13 ) time_dosp
512	CASE ( 'time_dots' )
513	READ ( 13 ) time_dots
514	CASE ( 'time_do2d_xy' )
515	READ ( 13 ) time_do2d_xy
516	CASE ( 'time_do2d_xz' )
517	READ ( 13 ) time_do2d_xz
518	CASE ( 'time_do2d_yz' )
519	READ ( 13 ) time_do2d_yz
520	CASE ( 'time_do3d' )
521	READ ( 13 ) time_do3d
522	CASE ( 'time_do_av' )
523	READ ( 13 ) time_do_av
524	CASE ( 'time_do_sla' )
525	READ ( 13 ) time_do_sla
526	CASE ( 'time_dvrp' )
527	READ ( 13 ) time_dvrp
528	CASE ( 'time_restart' )
529	READ ( 13 ) time_restart
530	CASE ( 'time_run_control' )
531	READ ( 13 ) time_run_control
532	CASE ( 'time_since_reference_point' )
533	READ ( 13 ) time_since_reference_point
534	CASE ( 'time_sort_particles' )
535	READ ( 13 ) time_sort_particles
536	CASE ( 'timestep_scheme' )
537	READ ( 13 ) timestep_scheme
538	CASE ( 'topography' )
539	READ ( 13 ) topography
540	CASE ( 'topography_grid_convention' )
541	READ ( 13 ) topography_grid_convention
542	CASE ( 'top_heatflux' )
543	READ ( 13 ) top_heatflux
544	CASE ( 'top_momentumflux_u' )
545	READ ( 13 ) top_momentumflux_u
546	CASE ( 'top_momentumflux_v' )
547	READ ( 13 ) top_momentumflux_v
548	CASE ( 'top_salinityflux' )
549	READ ( 13 ) top_salinityflux
550	CASE ( 'tsc' )
551	READ ( 13 ) tsc
552	CASE ( 'turbulent_inflow' )
553	READ ( 13 ) turbulent_inflow
554	CASE ( 'u_bulk' )
555	READ ( 13 ) u_bulk
556	CASE ( 'u_init' )
557	READ ( 13 ) u_init
558	CASE ( 'u_max' )
559	READ ( 13 ) u_max
560	CASE ( 'u_max_ijk' )
561	READ ( 13 ) u_max_ijk
562	CASE ( 'ug' )
563	READ ( 13 ) ug
564	CASE ( 'ug_surface' )
565	READ ( 13 ) ug_surface
566	CASE ( 'ug_vertical_gradient' )
567	READ ( 13 ) ug_vertical_gradient
568	CASE ( 'ug_vertical_gradient_level' )
569	READ ( 13 ) ug_vertical_gradient_level
570	CASE ( 'ug_vertical_gradient_level_ind' )
571	READ ( 13 ) ug_vertical_gradient_level_ind
572	CASE ( 'ups_limit_e' )
573	READ ( 13 ) ups_limit_e
574	CASE ( 'ups_limit_pt' )
575	READ ( 13 ) ups_limit_pt
576	CASE ( 'ups_limit_u' )
577	READ ( 13 ) ups_limit_u
578	CASE ( 'ups_limit_v' )
579	READ ( 13 ) ups_limit_v
580	CASE ( 'ups_limit_w' )
581	READ ( 13 ) ups_limit_w
582	CASE ( 'use_surface_fluxes' )
583	READ ( 13 ) use_surface_fluxes
584	CASE ( 'use_top_fluxes' )
585	READ ( 13 ) use_top_fluxes
586	CASE ( 'use_ug_for_galilei_tr' )
587	READ ( 13 ) use_ug_for_galilei_tr
588	CASE ( 'use_upstream_for_tke' )
589	READ ( 13 ) use_upstream_for_tke
590	CASE ( 'v_bulk' )
591	READ ( 13 ) v_bulk
592	CASE ( 'v_init' )
593	READ ( 13 ) v_init
594	CASE ( 'v_max' )
595	READ ( 13 ) v_max
596	CASE ( 'v_max_ijk' )
597	READ ( 13 ) v_max_ijk
598	CASE ( 'vg' )
599	READ ( 13 ) vg
600	CASE ( 'vg_surface' )
601	READ ( 13 ) vg_surface
602	CASE ( 'vg_vertical_gradient' )
603	READ ( 13 ) vg_vertical_gradient
604	CASE ( 'vg_vertical_gradient_level' )
605	READ ( 13 ) vg_vertical_gradient_level
606	CASE ( 'vg_vertical_gradient_level_ind' )
607	READ ( 13 ) vg_vertical_gradient_level_ind
608	CASE ( 'volume_flow_area' )
609	READ ( 13 ) volume_flow_area
610	CASE ( 'volume_flow_initial' )
611	READ ( 13 ) volume_flow_initial
612	CASE ( 'wall_adjustment' )
613	READ ( 13 ) wall_adjustment
614	CASE ( 'subs_vertical_gradient' )
615	READ ( 13 ) subs_vertical_gradient
616	CASE ( 'subs_vertical_gradient_level' )
617	READ ( 13 ) subs_vertical_gradient_level
618	CASE ( 'subs_vertical_gradient_level_i' )
619	READ ( 13 ) subs_vertical_gradient_level_i
620	CASE ( 'w_max' )
621	READ ( 13 ) w_max
622	CASE ( 'w_max_ijk' )
623	READ ( 13 ) w_max_ijk
624
625	CASE DEFAULT
626	WRITE( message_string, * ) 'unknown variable named "', &
627	TRIM( variable_chr ), '" found in', &
628	' data from prior run on PE ', myid
629	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
630	END SELECT
631	!
632	!-- Read next string
633	READ ( 13 ) variable_chr
634
635	ENDDO
636
637
638	END SUBROUTINE read_var_list
639
640
641
642	SUBROUTINE read_parts_of_var_list
643
644	!------------------------------------------------------------------------------!
645	! Description:
646	! ------------
647	! Skipping the global control variables from restart-file (binary format)
648	! except some informations needed when reading restart data from a previous
649	! run which used a smaller total domain or/and a different domain decomposition.
650	!------------------------------------------------------------------------------!
651
652	USE arrays_3d
653	USE control_parameters
654	USE indices
655	USE pegrid
656	USE statistics
657
658	IMPLICIT NONE
659
660	CHARACTER (LEN=10) :: version_on_file
661	CHARACTER (LEN=30) :: variable_chr
662
663	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
664	statistic_regions_on_file, tmp_mpru, tmp_sr
665
666	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
667	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
668
669
670	CALL check_open( 13 )
671
672	WRITE (9,*) 'rpovl: after check open 13'
673	CALL local_flush( 9 )
674	READ ( 13 ) version_on_file
675
676	!
677	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
678	!-- run
679	READ ( 13 ) variable_chr
680	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
681	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
682	'run on PE ', myid
683	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
684	ENDIF
685	READ ( 13 ) numprocs_previous_run
686
687	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
688	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
689	ENDIF
690
691	READ ( 13 ) variable_chr
692	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
693	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
694	'prior run on PE ', myid
695	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
696	ENDIF
697	READ ( 13 ) hor_index_bounds_previous_run
698
699	!
700	!-- Read vertical number of gridpoints and number of different areas used
701	!-- for computing statistics. Allocate arrays depending on these values,
702	!-- which are needed for the following read instructions.
703	READ ( 13 ) variable_chr
704	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
705	message_string = 'nz not found in restart data file'
706	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
707	ENDIF
708	READ ( 13 ) nz_on_file
709	IF ( nz_on_file /= nz ) THEN
710	WRITE( message_string, * ) 'mismatch concerning number of ', &
711	'gridpoints along z', &
712	'&nz on file = "', nz_on_file, '"', &
713	'&nz from run = "', nz, '"'
714	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
715	ENDIF
716
717	READ ( 13 ) variable_chr
718	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
719	message_string = 'max_pr_user not found in restart data file'
720	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
721	ENDIF
722	READ ( 13 ) max_pr_user_on_file
723	IF ( max_pr_user_on_file /= max_pr_user ) THEN
724	WRITE( message_string, * ) 'number of user profiles on res', &
725	'tart data file differs from the current ', &
726	'run&max_pr_user on file = "', &
727	max_pr_user_on_file, '"', &
728	'&max_pr_user from run = "', &
729	max_pr_user, '"'
730	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
731	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
732	ELSE
733	tmp_mpru = max_pr_user
734	ENDIF
735
736	READ ( 13 ) variable_chr
737	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
738	message_string = 'statistic_regions not found in restart data file'
739	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
740	ENDIF
741	READ ( 13 ) statistic_regions_on_file
742	IF ( statistic_regions_on_file /= statistic_regions ) THEN
743	WRITE( message_string, * ) 'statistic regions on restart data file ',&
744	'differ from the current run', &
745	'&statistic regions on file = "', &
746	statistic_regions_on_file, '"', &
747	'&statistic regions from run = "', &
748	statistic_regions, '"', &
749	'&statistic data may be lost!'
750	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
751	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
752	ELSE
753	tmp_sr = statistic_regions
754	ENDIF
755
756
757	!
758	!-- Now read and check some control parameters and skip the rest
759	WRITE (9,*) 'wpovl: begin reading variables'
760	CALL local_flush( 9 )
761	READ ( 13 ) variable_chr
762
763	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
764
765	SELECT CASE ( TRIM( variable_chr ) )
766
767	CASE ( 'average_count_pr' )
768	READ ( 13 ) average_count_pr
769	IF ( average_count_pr /= 0 ) THEN
770	WRITE( message_string, * ) 'inflow profiles not temporally ', &
771	'averaged. &Averaging will be done now using ', &
772	average_count_pr, ' samples.'
773	CALL message( 'read_parts_of_var_list', 'PA0309', &
774	0, 1, 0, 6, 0 )
775	ENDIF
776
777	CASE ( 'hom' )
778	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
779	0:statistic_regions_on_file) )
780	READ ( 13 ) hom_on_file
781	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
782	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
783	DEALLOCATE( hom_on_file )
784
785	CASE ( 'hom_sum' )
786	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
787	0:statistic_regions_on_file) )
788	READ ( 13 ) hom_sum_on_file
789	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
790	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
791	DEALLOCATE( hom_sum_on_file )
792
793	CASE ( 'nx' )
794	READ ( 13 ) nx_on_file
795
796	CASE ( 'ny' )
797	READ ( 13 ) ny_on_file
798
799
800	CASE DEFAULT
801
802	READ ( 13 ) idum
803
804	END SELECT
805
806	READ ( 13 ) variable_chr
807
808	ENDDO
809
810	!
811	!-- Calculate the temporal average of vertical profiles, if neccessary
812	IF ( average_count_pr /= 0 ) THEN
813	hom_sum = hom_sum / REAL( average_count_pr )
814	ENDIF
815
816
817	END SUBROUTINE read_parts_of_var_list
818
819
820
821	SUBROUTINE skip_var_list
822
823	!------------------------------------------------------------------------------!
824	! Description:
825	! ------------
826	! Skipping the global control variables from restart-file (binary format)
827	!------------------------------------------------------------------------------!
828
829	IMPLICIT NONE
830
831	CHARACTER (LEN=10) :: version_on_file
832	CHARACTER (LEN=30) :: variable_chr
833
834	INTEGER :: idum
835
836
837	WRITE (9,*) 'skipvl #1'
838	CALL local_flush( 9 )
839	READ ( 13 ) version_on_file
840
841	WRITE (9,*) 'skipvl before variable_chr'
842	CALL local_flush( 9 )
843	READ ( 13 ) variable_chr
844	WRITE (9,*) 'skipvl after variable_chr'
845	CALL local_flush( 9 )
846
847	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
848
849	WRITE (9,*) 'skipvl chr = ', variable_chr
850	CALL local_flush( 9 )
851	READ ( 13 ) idum
852	READ ( 13 ) variable_chr
853
854	ENDDO
855	WRITE (9,*) 'skipvl last'
856	CALL local_flush( 9 )
857
858
859	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |