Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 580

Last change on this file since 580 was 580, checked in by heinze, 14 years ago
Renaming of ws_vertical_gradient to subs_vertical_gradient, ws_vertical_gradient_level to subs_vertical_gradient_level and ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
Property svn:keywords set to `Id`
File size: 31.1 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
7	! ws_vertical_gradient_level to subs_vertical_gradient_level and
8	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: read_var_list.f90 580 2010-10-05 13:59:11Z heinze $
13	!
14	! 411 2009-12-11 14:15:58Z heinze
15	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
16	! ws_vertical_gradient_level_ind
17	!
18	! 345 2009-07-01 14:37:56Z heinze
19	! +output_for_t0
20	! dt_fixed is read into a dummy variable.
21	! Output of messages replaced by message handling routine.
22	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
23	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
24	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
25	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
26	!
27	! 216 2008-11-25 07:12:43Z raasch
28	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
29	!
30	! 173 2008-05-23 20:39:38Z raasch
31	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
32	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
33	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
34	! recycling_width, turbulent_inflow,
35	! -cross_ts_*, npex, npey,
36	! hom_sum, volume_flow_area, volume_flow_initial moved from
37	! read_3d_binary to here,
38	! routines read_parts_of_var_list and skip_var_list added at the end
39	!
40	! 138 2007-11-28 10:03:58Z letzel
41	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
42	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
43	! plant_canopy, time_sort_particles
44	!
45	! 102 2007-07-27 09:09:17Z raasch
46	! +time_coupling, top_momentumflux_u\|v
47	!
48	! 95 2007-06-02 16:48:38Z raasch
49	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
50	! sa_vertical_gradient_level, bottom/top_salinity_flux
51	!
52	! 87 2007-05-22 15:46:47Z raasch
53	! +max_pr_user (version 3.1), var_hom renamed pr_palm
54	!
55	! 75 2007-03-22 09:54:05Z raasch
56	! +loop_optimization, pt_reference, moisture renamed humidity
57	!
58	! 20 2007-02-26 00:12:32Z raasch
59	! +top_heatflux, use_top_fluxes
60	!
61	! RCS Log replace by Id keyword, revision history cleaned up
62	!
63	! Revision 1.34 2006/08/22 14:14:27 raasch
64	! +dz_max
65	!
66	! Revision 1.1 1998/03/18 20:18:48 raasch
67	! Initial revision
68	!
69	!
70	! Description:
71	! ------------
72	! Reading values of global control variables from restart-file (binary format)
73	!------------------------------------------------------------------------------!
74
75	USE arrays_3d
76	USE averaging
77	USE control_parameters
78	USE grid_variables
79	USE indices
80	USE model_1d
81	USE netcdf_control
82	USE particle_attributes
83	USE pegrid
84	USE profil_parameter
85	USE statistics
86
87	IMPLICIT NONE
88
89	CHARACTER (LEN=10) :: binary_version, version_on_file
90	CHARACTER (LEN=30) :: variable_chr
91
92	LOGICAL :: ldum
93
94
95	CALL check_open( 13 )
96
97	!
98	!-- Make version number check first
99	READ ( 13 ) version_on_file
100	binary_version = '3.4'
101	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
102	WRITE( message_string, * ) 'version mismatch concerning control ', &
103	'variables', &
104	'&version on file = "', &
105	TRIM( version_on_file ), '"', &
106	'&version on program = "', &
107	TRIM( binary_version ), '"'
108	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
109	ENDIF
110
111	!
112	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
113	!-- run
114	READ ( 13 ) variable_chr
115	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
116	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
117	'run on PE ', myid
118	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
119	ENDIF
120	READ ( 13 ) numprocs_previous_run
121
122	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
123	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
124	ENDIF
125
126	READ ( 13 ) variable_chr
127	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
128	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
129	'prior run on PE ', myid
130	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
131	ENDIF
132	READ ( 13 ) hor_index_bounds_previous_run
133
134	!
135	!-- Read vertical number of gridpoints and number of different areas used
136	!-- for computing statistics. Allocate arrays depending on these values,
137	!-- which are needed for the following read instructions.
138	READ ( 13 ) variable_chr
139	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
140	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
141	myid
142	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
143	ENDIF
144	READ ( 13 ) nz
145
146	READ ( 13 ) variable_chr
147	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
148	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
149	'prior run on PE ', myid
150	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
151	ENDIF
152	READ ( 13 ) max_pr_user ! This value is checked against the number of
153	! user profiles given for the current run
154	! in routine user_parin (it has to match)
155
156	READ ( 13 ) variable_chr
157	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
158	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
159	'prior run on PE ', myid
160	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
161	ENDIF
162	READ ( 13 ) statistic_regions
163	IF ( .NOT. ALLOCATED( ug ) ) THEN
164	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
165	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
166	sa_init(0:nz+1), &
167	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
168	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
169	ENDIF
170
171	!
172	!-- Now read all control parameters:
173	!-- Caution: When the following read instructions have been changed, the
174	!-- ------- version number stored in the variable binary_version has to be
175	!-- increased. The same changes must also be done in write_var_list.
176	READ ( 13 ) variable_chr
177	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
178
179	SELECT CASE ( TRIM( variable_chr ) )
180
181	CASE ( 'adjust_mixing_length' )
182	READ ( 13 ) adjust_mixing_length
183	CASE ( 'advected_distance_x' )
184	READ ( 13 ) advected_distance_x
185	CASE ( 'advected_distance_y' )
186	READ ( 13 ) advected_distance_y
187	CASE ( 'alpha_surface' )
188	READ ( 13 ) alpha_surface
189	CASE ( 'average_count_pr' )
190	READ ( 13 ) average_count_pr
191	CASE ( 'average_count_sp' )
192	READ ( 13 ) average_count_sp
193	CASE ( 'average_count_3d' )
194	READ ( 13 ) average_count_3d
195	CASE ( 'bc_e_b' )
196	READ ( 13 ) bc_e_b
197	CASE ( 'bc_lr' )
198	READ ( 13 ) bc_lr
199	CASE ( 'bc_ns' )
200	READ ( 13 ) bc_ns
201	CASE ( 'bc_p_b' )
202	READ ( 13 ) bc_p_b
203	CASE ( 'bc_p_t' )
204	READ ( 13 ) bc_p_t
205	CASE ( 'bc_pt_b' )
206	READ ( 13 ) bc_pt_b
207	CASE ( 'bc_pt_t' )
208	READ ( 13 ) bc_pt_t
209	CASE ( 'bc_pt_t_val' )
210	READ ( 13 ) bc_pt_t_val
211	CASE ( 'bc_q_b' )
212	READ ( 13 ) bc_q_b
213	CASE ( 'bc_q_t' )
214	READ ( 13 ) bc_q_t
215	CASE ( 'bc_q_t_val' )
216	READ ( 13 ) bc_q_t_val
217	CASE ( 'bc_s_b' )
218	READ ( 13 ) bc_s_b
219	CASE ( 'bc_s_t' )
220	READ ( 13 ) bc_s_t
221	CASE ( 'bc_sa_t' )
222	READ ( 13 ) bc_sa_t
223	CASE ( 'bc_uv_b' )
224	READ ( 13 ) bc_uv_b
225	CASE ( 'bc_uv_t' )
226	READ ( 13 ) bc_uv_t
227	CASE ( 'bottom_salinityflux' )
228	READ ( 13 ) bottom_salinityflux
229	CASE ( 'building_height' )
230	READ ( 13 ) building_height
231	CASE ( 'building_length_x' )
232	READ ( 13 ) building_length_x
233	CASE ( 'building_length_y' )
234	READ ( 13 ) building_length_y
235	CASE ( 'building_wall_left' )
236	READ ( 13 ) building_wall_left
237	CASE ( 'building_wall_south' )
238	READ ( 13 ) building_wall_south
239	CASE ( 'canopy_mode' )
240	READ ( 13 ) canopy_mode
241	CASE ( 'canyon_height' )
242	READ ( 13 ) canyon_height
243	CASE ( 'canyon_width_x' )
244	READ ( 13 ) canyon_width_x
245	CASE ( 'canyon_width_y' )
246	READ ( 13 ) canyon_width_y
247	CASE ( 'canyon_wall_left' )
248	READ ( 13 ) canyon_wall_left
249	CASE ( 'canyon_wall_south' )
250	READ ( 13 ) canyon_wall_south
251	CASE ( 'cloud_droplets' )
252	READ ( 13 ) cloud_droplets
253	CASE ( 'cloud_physics' )
254	READ ( 13 ) cloud_physics
255	CASE ( 'conserve_volume_flow' )
256	READ ( 13 ) conserve_volume_flow
257	CASE ( 'conserve_volume_flow_mode' )
258	READ ( 13 ) conserve_volume_flow_mode
259	CASE ( 'coupling_start_time' )
260	READ ( 13 ) coupling_start_time
261	CASE ( 'cthf' )
262	READ ( 13 ) cthf
263	CASE ( 'current_timestep_number' )
264	READ ( 13 ) current_timestep_number
265	CASE ( 'cut_spline_overshoot' )
266	READ ( 13 ) cut_spline_overshoot
267	CASE ( 'damp_level_1d' )
268	READ ( 13 ) damp_level_1d
269	CASE ( 'dissipation_1d' )
270	READ ( 13 ) dissipation_1d
271	CASE ( 'dp_external' )
272	READ ( 13 ) dp_external
273	CASE ( 'dp_level_b' )
274	READ ( 13 ) dp_level_b
275	CASE ( 'dp_smooth' )
276	READ ( 13 ) dp_smooth
277	CASE ( 'dpdxy' )
278	READ ( 13 ) dpdxy
279	CASE ( 'drag_coefficient' )
280	READ ( 13 ) drag_coefficient
281	CASE ( 'dt_fixed' )
282	READ ( 13 ) ldum ! restart files created before rev 333
283	! contained dt_fixed by mistake; it is still
284	! read here in order to allow usage of these
285	! older restart files; can be removed in a
286	! later version
287	CASE ( 'dt_pr_1d' )
288	READ ( 13 ) dt_pr_1d
289	CASE ( 'dt_run_control_1d' )
290	READ ( 13 ) dt_run_control_1d
291	CASE ( 'dt_3d' )
292	READ ( 13 ) dt_3d
293	CASE ( 'dvrp_filecount' )
294	READ ( 13 ) dvrp_filecount
295	CASE ( 'dx' )
296	READ ( 13 ) dx
297	CASE ( 'dy' )
298	READ ( 13 ) dy
299	CASE ( 'dz' )
300	READ ( 13 ) dz
301	CASE ( 'dz_max' )
302	READ ( 13 ) dz_max
303	CASE ( 'dz_stretch_factor' )
304	READ ( 13 ) dz_stretch_factor
305	CASE ( 'dz_stretch_level' )
306	READ ( 13 ) dz_stretch_level
307	CASE ( 'e_min' )
308	READ ( 13 ) e_min
309	CASE ( 'end_time_1d' )
310	READ ( 13 ) end_time_1d
311	CASE ( 'fft_method' )
312	READ ( 13 ) fft_method
313	CASE ( 'first_call_advec_particles' )
314	READ ( 13 ) first_call_advec_particles
315	CASE ( 'galilei_transformation' )
316	READ ( 13 ) galilei_transformation
317	CASE ( 'grid_matching' )
318	READ ( 13 ) grid_matching
319	CASE ( 'hom' )
320	READ ( 13 ) hom
321	CASE ( 'hom_sum' )
322	READ ( 13 ) hom_sum
323	CASE ( 'humidity' )
324	READ ( 13 ) humidity
325	CASE ( 'inflow_damping_factor' )
326	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
327	ALLOCATE( inflow_damping_factor(0:nz+1) )
328	ENDIF
329	READ ( 13 ) inflow_damping_factor
330	CASE ( 'inflow_damping_height' )
331	READ ( 13 ) inflow_damping_height
332	CASE ( 'inflow_damping_width' )
333	READ ( 13 ) inflow_damping_width
334	CASE ( 'inflow_disturbance_begin' )
335	READ ( 13 ) inflow_disturbance_begin
336	CASE ( 'inflow_disturbance_end' )
337	READ ( 13 ) inflow_disturbance_end
338	CASE ( 'km_constant' )
339	READ ( 13 ) km_constant
340	CASE ( 'km_damp_max' )
341	READ ( 13 ) km_damp_max
342	CASE ( 'lad' )
343	READ ( 13 ) lad
344	CASE ( 'lad_surface' )
345	READ ( 13 ) lad_surface
346	CASE ( 'lad_vertical_gradient' )
347	READ ( 13 ) lad_vertical_gradient
348	CASE ( 'lad_vertical_gradient_level' )
349	READ ( 13 ) lad_vertical_gradient_level
350	CASE ( 'lad_vertical_gradient_level_in' )
351	READ ( 13 ) lad_vertical_gradient_level_ind
352	CASE ( 'last_dt_change' )
353	READ ( 13 ) last_dt_change
354	CASE ( 'large_scale_subsidence' )
355	READ ( 13 ) large_scale_subsidence
356	CASE ( 'leaf_surface_concentration' )
357	READ ( 13 ) leaf_surface_concentration
358	CASE ( 'long_filter_factor' )
359	READ ( 13 ) long_filter_factor
360	CASE ( 'loop_optimization' )
361	READ ( 13 ) loop_optimization
362	CASE ( 'mean_inflow_profiles' )
363	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
364	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
365	ENDIF
366	READ ( 13 ) mean_inflow_profiles
367	CASE ( 'mixing_length_1d' )
368	READ ( 13 ) mixing_length_1d
369	CASE ( 'momentum_advec' )
370	READ ( 13 ) momentum_advec
371	CASE ( 'netcdf_precision' )
372	READ ( 13 ) netcdf_precision
373	CASE ( 'nsor_ini' )
374	READ ( 13 ) nsor_ini
375	CASE ( 'nx' )
376	READ ( 13 ) nx
377	nx_on_file = nx
378	CASE ( 'ny' )
379	READ ( 13 ) ny
380	ny_on_file = ny
381	CASE ( 'ocean' )
382	READ ( 13 ) ocean
383	CASE ( 'old_dt' )
384	READ ( 13 ) old_dt
385	CASE ( 'omega' )
386	READ ( 13 ) omega
387	CASE ( 'outflow_damping_width' )
388	READ ( 13 ) outflow_damping_width
389	CASE ( 'output_for_t0' )
390	READ (13) output_for_t0
391	CASE ( 'overshoot_limit_e' )
392	READ ( 13 ) overshoot_limit_e
393	CASE ( 'overshoot_limit_pt' )
394	READ ( 13 ) overshoot_limit_pt
395	CASE ( 'overshoot_limit_u' )
396	READ ( 13 ) overshoot_limit_u
397	CASE ( 'overshoot_limit_v' )
398	READ ( 13 ) overshoot_limit_v
399	CASE ( 'overshoot_limit_w' )
400	READ ( 13 ) overshoot_limit_w
401	CASE ( 'passive_scalar' )
402	READ ( 13 ) passive_scalar
403	CASE ( 'pch_index' )
404	READ ( 13 ) pch_index
405	CASE ( 'phi' )
406	READ ( 13 ) phi
407	CASE ( 'plant_canopy' )
408	READ ( 13 ) plant_canopy
409	CASE ( 'prandtl_layer' )
410	READ ( 13 ) prandtl_layer
411	CASE ( 'precipitation' )
412	READ ( 13 ) precipitation
413	CASE ( 'pt_init' )
414	READ ( 13 ) pt_init
415	CASE ( 'pt_reference' )
416	READ ( 13 ) pt_reference
417	CASE ( 'pt_surface' )
418	READ ( 13 ) pt_surface
419	CASE ( 'pt_surface_initial_change' )
420	READ ( 13 ) pt_surface_initial_change
421	CASE ( 'pt_vertical_gradient' )
422	READ ( 13 ) pt_vertical_gradient
423	CASE ( 'pt_vertical_gradient_level' )
424	READ ( 13 ) pt_vertical_gradient_level
425	CASE ( 'pt_vertical_gradient_level_ind' )
426	READ ( 13 ) pt_vertical_gradient_level_ind
427	CASE ( 'q_init' )
428	READ ( 13 ) q_init
429	CASE ( 'q_surface' )
430	READ ( 13 ) q_surface
431	CASE ( 'q_surface_initial_change' )
432	READ ( 13 ) q_surface_initial_change
433	CASE ( 'q_vertical_gradient' )
434	READ ( 13 ) q_vertical_gradient
435	CASE ( 'q_vertical_gradient_level' )
436	READ ( 13 ) q_vertical_gradient_level
437	CASE ( 'q_vertical_gradient_level_ind' )
438	READ ( 13 ) q_vertical_gradient_level_ind
439	CASE ( 'radiation' )
440	READ ( 13 ) radiation
441	CASE ( 'random_generator' )
442	READ ( 13 ) random_generator
443	CASE ( 'random_heatflux' )
444	READ ( 13 ) random_heatflux
445	CASE ( 'recycling_width' )
446	READ ( 13 ) recycling_width
447	CASE ( 'rif_max' )
448	READ ( 13 ) rif_max
449	CASE ( 'rif_min' )
450	READ ( 13 ) rif_min
451	CASE ( 'roughness_length' )
452	READ ( 13 ) roughness_length
453	CASE ( 'runnr' )
454	READ ( 13 ) runnr
455	CASE ( 'run_coupled' )
456	READ ( 13 ) run_coupled
457	CASE ( 'sa_init' )
458	READ ( 13 ) sa_init
459	CASE ( 'sa_surface' )
460	READ ( 13 ) sa_surface
461	CASE ( 'sa_vertical_gradient' )
462	READ ( 13 ) sa_vertical_gradient
463	CASE ( 'sa_vertical_gradient_level' )
464	READ ( 13 ) sa_vertical_gradient_level
465	CASE ( 'scalar_advec' )
466	READ ( 13 ) scalar_advec
467	CASE ( 'scalar_exchange_coefficient' )
468	READ ( 13 ) scalar_exchange_coefficient
469	CASE ( 'simulated_time' )
470	READ ( 13 ) simulated_time
471	CASE ( 'surface_heatflux' )
472	READ ( 13 ) surface_heatflux
473	CASE ( 'surface_pressure' )
474	READ ( 13 ) surface_pressure
475	CASE ( 'surface_scalarflux' )
476	READ ( 13 ) surface_scalarflux
477	CASE ( 'surface_waterflux' )
478	READ ( 13 ) surface_waterflux
479	CASE ( 's_surface' )
480	READ ( 13 ) s_surface
481	CASE ( 's_surface_initial_change' )
482	READ ( 13 ) s_surface_initial_change
483	CASE ( 's_vertical_gradient' )
484	READ ( 13 ) s_vertical_gradient
485	CASE ( 's_vertical_gradient_level' )
486	READ ( 13 ) s_vertical_gradient_level
487	CASE ( 'time_coupling' )
488	READ ( 13 ) time_coupling
489	CASE ( 'time_disturb' )
490	READ ( 13 ) time_disturb
491	CASE ( 'time_dopr' )
492	READ ( 13 ) time_dopr
493	CASE ( 'time_dopr_av' )
494	READ ( 13 ) time_dopr_av
495	CASE ( 'time_dopr_listing' )
496	READ ( 13 ) time_dopr_listing
497	CASE ( 'time_dopts' )
498	READ ( 13 ) time_dopts
499	CASE ( 'time_dosp' )
500	READ ( 13 ) time_dosp
501	CASE ( 'time_dots' )
502	READ ( 13 ) time_dots
503	CASE ( 'time_do2d_xy' )
504	READ ( 13 ) time_do2d_xy
505	CASE ( 'time_do2d_xz' )
506	READ ( 13 ) time_do2d_xz
507	CASE ( 'time_do2d_yz' )
508	READ ( 13 ) time_do2d_yz
509	CASE ( 'time_do3d' )
510	READ ( 13 ) time_do3d
511	CASE ( 'time_do_av' )
512	READ ( 13 ) time_do_av
513	CASE ( 'time_do_sla' )
514	READ ( 13 ) time_do_sla
515	CASE ( 'time_dvrp' )
516	READ ( 13 ) time_dvrp
517	CASE ( 'time_restart' )
518	READ ( 13 ) time_restart
519	CASE ( 'time_run_control' )
520	READ ( 13 ) time_run_control
521	CASE ( 'time_since_reference_point' )
522	READ ( 13 ) time_since_reference_point
523	CASE ( 'time_sort_particles' )
524	READ ( 13 ) time_sort_particles
525	CASE ( 'timestep_scheme' )
526	READ ( 13 ) timestep_scheme
527	CASE ( 'topography' )
528	READ ( 13 ) topography
529	CASE ( 'topography_grid_convention' )
530	READ ( 13 ) topography_grid_convention
531	CASE ( 'top_heatflux' )
532	READ ( 13 ) top_heatflux
533	CASE ( 'top_momentumflux_u' )
534	READ ( 13 ) top_momentumflux_u
535	CASE ( 'top_momentumflux_v' )
536	READ ( 13 ) top_momentumflux_v
537	CASE ( 'top_salinityflux' )
538	READ ( 13 ) top_salinityflux
539	CASE ( 'tsc' )
540	READ ( 13 ) tsc
541	CASE ( 'turbulent_inflow' )
542	READ ( 13 ) turbulent_inflow
543	CASE ( 'u_bulk' )
544	READ ( 13 ) u_bulk
545	CASE ( 'u_init' )
546	READ ( 13 ) u_init
547	CASE ( 'u_max' )
548	READ ( 13 ) u_max
549	CASE ( 'u_max_ijk' )
550	READ ( 13 ) u_max_ijk
551	CASE ( 'ug' )
552	READ ( 13 ) ug
553	CASE ( 'ug_surface' )
554	READ ( 13 ) ug_surface
555	CASE ( 'ug_vertical_gradient' )
556	READ ( 13 ) ug_vertical_gradient
557	CASE ( 'ug_vertical_gradient_level' )
558	READ ( 13 ) ug_vertical_gradient_level
559	CASE ( 'ug_vertical_gradient_level_ind' )
560	READ ( 13 ) ug_vertical_gradient_level_ind
561	CASE ( 'ups_limit_e' )
562	READ ( 13 ) ups_limit_e
563	CASE ( 'ups_limit_pt' )
564	READ ( 13 ) ups_limit_pt
565	CASE ( 'ups_limit_u' )
566	READ ( 13 ) ups_limit_u
567	CASE ( 'ups_limit_v' )
568	READ ( 13 ) ups_limit_v
569	CASE ( 'ups_limit_w' )
570	READ ( 13 ) ups_limit_w
571	CASE ( 'use_surface_fluxes' )
572	READ ( 13 ) use_surface_fluxes
573	CASE ( 'use_top_fluxes' )
574	READ ( 13 ) use_top_fluxes
575	CASE ( 'use_ug_for_galilei_tr' )
576	READ ( 13 ) use_ug_for_galilei_tr
577	CASE ( 'use_upstream_for_tke' )
578	READ ( 13 ) use_upstream_for_tke
579	CASE ( 'v_bulk' )
580	READ ( 13 ) v_bulk
581	CASE ( 'v_init' )
582	READ ( 13 ) v_init
583	CASE ( 'v_max' )
584	READ ( 13 ) v_max
585	CASE ( 'v_max_ijk' )
586	READ ( 13 ) v_max_ijk
587	CASE ( 'vg' )
588	READ ( 13 ) vg
589	CASE ( 'vg_surface' )
590	READ ( 13 ) vg_surface
591	CASE ( 'vg_vertical_gradient' )
592	READ ( 13 ) vg_vertical_gradient
593	CASE ( 'vg_vertical_gradient_level' )
594	READ ( 13 ) vg_vertical_gradient_level
595	CASE ( 'vg_vertical_gradient_level_ind' )
596	READ ( 13 ) vg_vertical_gradient_level_ind
597	CASE ( 'volume_flow_area' )
598	READ ( 13 ) volume_flow_area
599	CASE ( 'volume_flow_initial' )
600	READ ( 13 ) volume_flow_initial
601	CASE ( 'wall_adjustment' )
602	READ ( 13 ) wall_adjustment
603	CASE ( 'subs_vertical_gradient' )
604	READ ( 13 ) subs_vertical_gradient
605	CASE ( 'subs_vertical_gradient_level' )
606	READ ( 13 ) subs_vertical_gradient_level
607	CASE ( 'subs_vertical_gradient_level_i' )
608	READ ( 13 ) subs_vertical_gradient_level_i
609	CASE ( 'w_max' )
610	READ ( 13 ) w_max
611	CASE ( 'w_max_ijk' )
612	READ ( 13 ) w_max_ijk
613
614	CASE DEFAULT
615	WRITE( message_string, * ) 'unknown variable named "', &
616	TRIM( variable_chr ), '" found in', &
617	' data from prior run on PE ', myid
618	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
619	END SELECT
620	!
621	!-- Read next string
622	READ ( 13 ) variable_chr
623
624	ENDDO
625
626
627	END SUBROUTINE read_var_list
628
629
630
631	SUBROUTINE read_parts_of_var_list
632
633	!------------------------------------------------------------------------------!
634	! Description:
635	! ------------
636	! Skipping the global control variables from restart-file (binary format)
637	! except some informations needed when reading restart data from a previous
638	! run which used a smaller total domain or/and a different domain decomposition.
639	!------------------------------------------------------------------------------!
640
641	USE arrays_3d
642	USE control_parameters
643	USE indices
644	USE pegrid
645	USE statistics
646
647	IMPLICIT NONE
648
649	CHARACTER (LEN=10) :: version_on_file
650	CHARACTER (LEN=30) :: variable_chr
651
652	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
653	statistic_regions_on_file, tmp_mpru, tmp_sr
654
655	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
656	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
657
658
659	CALL check_open( 13 )
660
661	WRITE (9,*) 'rpovl: after check open 13'
662	CALL local_flush( 9 )
663	READ ( 13 ) version_on_file
664
665	!
666	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
667	!-- run
668	READ ( 13 ) variable_chr
669	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
670	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
671	'run on PE ', myid
672	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
673	ENDIF
674	READ ( 13 ) numprocs_previous_run
675
676	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
677	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
678	ENDIF
679
680	READ ( 13 ) variable_chr
681	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
682	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
683	'prior run on PE ', myid
684	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
685	ENDIF
686	READ ( 13 ) hor_index_bounds_previous_run
687
688	!
689	!-- Read vertical number of gridpoints and number of different areas used
690	!-- for computing statistics. Allocate arrays depending on these values,
691	!-- which are needed for the following read instructions.
692	READ ( 13 ) variable_chr
693	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
694	message_string = 'nz not found in restart data file'
695	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
696	ENDIF
697	READ ( 13 ) nz_on_file
698	IF ( nz_on_file /= nz ) THEN
699	WRITE( message_string, * ) 'mismatch concerning number of ', &
700	'gridpoints along z', &
701	'&nz on file = "', nz_on_file, '"', &
702	'&nz from run = "', nz, '"'
703	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
704	ENDIF
705
706	READ ( 13 ) variable_chr
707	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
708	message_string = 'max_pr_user not found in restart data file'
709	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
710	ENDIF
711	READ ( 13 ) max_pr_user_on_file
712	IF ( max_pr_user_on_file /= max_pr_user ) THEN
713	WRITE( message_string, * ) 'number of user profiles on res', &
714	'tart data file differs from the current ', &
715	'run&max_pr_user on file = "', &
716	max_pr_user_on_file, '"', &
717	'&max_pr_user from run = "', &
718	max_pr_user, '"'
719	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
720	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
721	ELSE
722	tmp_mpru = max_pr_user
723	ENDIF
724
725	READ ( 13 ) variable_chr
726	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
727	message_string = 'statistic_regions not found in restart data file'
728	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
729	ENDIF
730	READ ( 13 ) statistic_regions_on_file
731	IF ( statistic_regions_on_file /= statistic_regions ) THEN
732	WRITE( message_string, * ) 'statistic regions on restart data file ',&
733	'differ from the current run', &
734	'&statistic regions on file = "', &
735	statistic_regions_on_file, '"', &
736	'&statistic regions from run = "', &
737	statistic_regions, '"', &
738	'&statistic data may be lost!'
739	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
740	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
741	ELSE
742	tmp_sr = statistic_regions
743	ENDIF
744
745
746	!
747	!-- Now read and check some control parameters and skip the rest
748	WRITE (9,*) 'wpovl: begin reading variables'
749	CALL local_flush( 9 )
750	READ ( 13 ) variable_chr
751
752	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
753
754	SELECT CASE ( TRIM( variable_chr ) )
755
756	CASE ( 'average_count_pr' )
757	READ ( 13 ) average_count_pr
758	IF ( average_count_pr /= 0 ) THEN
759	WRITE( message_string, * ) 'inflow profiles not temporally ', &
760	'averaged. &Averaging will be done now using ', &
761	average_count_pr, ' samples.'
762	CALL message( 'read_parts_of_var_list', 'PA0309', &
763	0, 1, 0, 6, 0 )
764	ENDIF
765
766	CASE ( 'hom' )
767	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
768	0:statistic_regions_on_file) )
769	READ ( 13 ) hom_on_file
770	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
771	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
772	DEALLOCATE( hom_on_file )
773
774	CASE ( 'hom_sum' )
775	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
776	0:statistic_regions_on_file) )
777	READ ( 13 ) hom_sum_on_file
778	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
779	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
780	DEALLOCATE( hom_sum_on_file )
781
782	CASE ( 'nx' )
783	READ ( 13 ) nx_on_file
784
785	CASE ( 'ny' )
786	READ ( 13 ) ny_on_file
787
788
789	CASE DEFAULT
790
791	READ ( 13 ) idum
792
793	END SELECT
794
795	READ ( 13 ) variable_chr
796
797	ENDDO
798
799	!
800	!-- Calculate the temporal average of vertical profiles, if neccessary
801	IF ( average_count_pr /= 0 ) THEN
802	hom_sum = hom_sum / REAL( average_count_pr )
803	ENDIF
804
805
806	END SUBROUTINE read_parts_of_var_list
807
808
809
810	SUBROUTINE skip_var_list
811
812	!------------------------------------------------------------------------------!
813	! Description:
814	! ------------
815	! Skipping the global control variables from restart-file (binary format)
816	!------------------------------------------------------------------------------!
817
818	IMPLICIT NONE
819
820	CHARACTER (LEN=10) :: version_on_file
821	CHARACTER (LEN=30) :: variable_chr
822
823	INTEGER :: idum
824
825
826	WRITE (9,*) 'skipvl #1'
827	CALL local_flush( 9 )
828	READ ( 13 ) version_on_file
829
830	WRITE (9,*) 'skipvl before variable_chr'
831	CALL local_flush( 9 )
832	READ ( 13 ) variable_chr
833	WRITE (9,*) 'skipvl after variable_chr'
834	CALL local_flush( 9 )
835
836	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
837
838	WRITE (9,*) 'skipvl chr = ', variable_chr
839	CALL local_flush( 9 )
840	READ ( 13 ) idum
841	READ ( 13 ) variable_chr
842
843	ENDDO
844	WRITE (9,*) 'skipvl last'
845	CALL local_flush( 9 )
846
847
848	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |