Home

Context Navigation

read_var_list.f90 @ 513

Last change on this file since 513 was 482, checked in by raasch, 15 years ago

New:
---
compare_palm_logs is additionally compiled with mbuild -u (Makefile in trunk/UTIL)

make options (mopts) to be set by configuration file implemented (mrun, mbuild)

humidity=.T. is now usable for runs with topography. wall_humidityflux and
wall_scalarflux are the corresponding new parin arrays.
(check_parameters, init_3d_model, parin)

Large scale vertical motion (subsidence/ascent) can be applied to the
prognostic equation for the potential temperature. (check_parameters, header,
Makefile, modules, parin, prognostic_equations, read_var_list, subsidence,
write_var_list)

A simple method for installing and running palm (with limited features)
has been added. (Makefile, palm_simple_install, palm_simple_run)

Changed:

2d-decomposition is default for Cray-XT machines (init_pegrid)

var_ts is replaced by dots_max (modules,init_3d_model)

Every cloud droplet has now an own weighting factor and can be deleted due to
collisions. Condensation and collision of cloud droplets are adjusted
accordingly. (advec_particles)

Collision efficiency for large cloud droplets has changed according to table of
Rogers and Yau. (collision_efficiency)

Errors:

Bugfix for generating serial jobs (subjob)

Bugfix: index problem concerning gradient_level indices removed (header)

Dimension of array stat in cascade change to prevent type problems with
mpi2 libraries (poisfft_hybrid)

Loop was split to make runs reproducible when using ifort compiler.
(disturb_field)

Bugfix: exchange of ghost points for prho included (time_integration)

Bugfix: calculation of time-averaged surface heatfluxes (sum_up_3d_data)

Bugfix: calculation of precipitation_rate (calc_precipitation)

Bugfix: initial data assignments to some dvrp arrays changed due to error
messages from gfortran compiler (modules)

Bugfix: calculation of cloud droplet velocity (advec_particles)

Bugfix: transfer of particles at south/left edge (advec_particles)

Bugfix: calculation of collision_efficiency (collision_efficiency)

Bugfix: initialisation of var_mod (subsidence)

Property svn:keywords set to Id

File size: 30.9 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 482 2010-02-05 06:37:03Z heinze $
11	!
12	! 411 2009-12-11 14:15:58Z heinze
13	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
14	! ws_vertical_gradient_level_ind
15	!
16	! 345 2009-07-01 14:37:56Z heinze
17	! +output_for_t0
18	! dt_fixed is read into a dummy variable.
19	! Output of messages replaced by message handling routine.
20	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
21	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
22	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
23	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
24	!
25	! 216 2008-11-25 07:12:43Z raasch
26	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
27	!
28	! 173 2008-05-23 20:39:38Z raasch
29	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
30	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
31	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
32	! recycling_width, turbulent_inflow,
33	! -cross_ts_*, npex, npey,
34	! hom_sum, volume_flow_area, volume_flow_initial moved from
35	! read_3d_binary to here,
36	! routines read_parts_of_var_list and skip_var_list added at the end
37	!
38	! 138 2007-11-28 10:03:58Z letzel
39	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
40	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
41	! plant_canopy, time_sort_particles
42	!
43	! 102 2007-07-27 09:09:17Z raasch
44	! +time_coupling, top_momentumflux_u\|v
45	!
46	! 95 2007-06-02 16:48:38Z raasch
47	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
48	! sa_vertical_gradient_level, bottom/top_salinity_flux
49	!
50	! 87 2007-05-22 15:46:47Z raasch
51	! +max_pr_user (version 3.1), var_hom renamed pr_palm
52	!
53	! 75 2007-03-22 09:54:05Z raasch
54	! +loop_optimization, pt_reference, moisture renamed humidity
55	!
56	! 20 2007-02-26 00:12:32Z raasch
57	! +top_heatflux, use_top_fluxes
58	!
59	! RCS Log replace by Id keyword, revision history cleaned up
60	!
61	! Revision 1.34 2006/08/22 14:14:27 raasch
62	! +dz_max
63	!
64	! Revision 1.1 1998/03/18 20:18:48 raasch
65	! Initial revision
66	!
67	!
68	! Description:
69	! ------------
70	! Reading values of global control variables from restart-file (binary format)
71	!------------------------------------------------------------------------------!
72
73	USE arrays_3d
74	USE averaging
75	USE control_parameters
76	USE grid_variables
77	USE indices
78	USE model_1d
79	USE netcdf_control
80	USE particle_attributes
81	USE pegrid
82	USE profil_parameter
83	USE statistics
84
85	IMPLICIT NONE
86
87	CHARACTER (LEN=10) :: binary_version, version_on_file
88	CHARACTER (LEN=30) :: variable_chr
89
90	LOGICAL :: ldum
91
92
93	CALL check_open( 13 )
94
95	!
96	!-- Make version number check first
97	READ ( 13 ) version_on_file
98	binary_version = '3.4'
99	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
100	WRITE( message_string, * ) 'version mismatch concerning control ', &
101	'variables', &
102	'&version on file = "', &
103	TRIM( version_on_file ), '"', &
104	'&version on program = "', &
105	TRIM( binary_version ), '"'
106	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
107	ENDIF
108
109	!
110	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
111	!-- run
112	READ ( 13 ) variable_chr
113	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
114	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
115	'run on PE ', myid
116	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
117	ENDIF
118	READ ( 13 ) numprocs_previous_run
119
120	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
121	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
122	ENDIF
123
124	READ ( 13 ) variable_chr
125	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
126	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
127	'prior run on PE ', myid
128	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
129	ENDIF
130	READ ( 13 ) hor_index_bounds_previous_run
131
132	!
133	!-- Read vertical number of gridpoints and number of different areas used
134	!-- for computing statistics. Allocate arrays depending on these values,
135	!-- which are needed for the following read instructions.
136	READ ( 13 ) variable_chr
137	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
138	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
139	myid
140	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
141	ENDIF
142	READ ( 13 ) nz
143
144	READ ( 13 ) variable_chr
145	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
146	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
147	'prior run on PE ', myid
148	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
149	ENDIF
150	READ ( 13 ) max_pr_user ! This value is checked against the number of
151	! user profiles given for the current run
152	! in routine user_parin (it has to match)
153
154	READ ( 13 ) variable_chr
155	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
156	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
157	'prior run on PE ', myid
158	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
159	ENDIF
160	READ ( 13 ) statistic_regions
161	IF ( .NOT. ALLOCATED( ug ) ) THEN
162	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
163	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
164	sa_init(0:nz+1), &
165	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
166	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
167	ENDIF
168
169	!
170	!-- Now read all control parameters:
171	!-- Caution: When the following read instructions have been changed, the
172	!-- ------- version number stored in the variable binary_version has to be
173	!-- increased. The same changes must also be done in write_var_list.
174	READ ( 13 ) variable_chr
175	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
176
177	SELECT CASE ( TRIM( variable_chr ) )
178
179	CASE ( 'adjust_mixing_length' )
180	READ ( 13 ) adjust_mixing_length
181	CASE ( 'advected_distance_x' )
182	READ ( 13 ) advected_distance_x
183	CASE ( 'advected_distance_y' )
184	READ ( 13 ) advected_distance_y
185	CASE ( 'alpha_surface' )
186	READ ( 13 ) alpha_surface
187	CASE ( 'average_count_pr' )
188	READ ( 13 ) average_count_pr
189	CASE ( 'average_count_sp' )
190	READ ( 13 ) average_count_sp
191	CASE ( 'average_count_3d' )
192	READ ( 13 ) average_count_3d
193	CASE ( 'bc_e_b' )
194	READ ( 13 ) bc_e_b
195	CASE ( 'bc_lr' )
196	READ ( 13 ) bc_lr
197	CASE ( 'bc_ns' )
198	READ ( 13 ) bc_ns
199	CASE ( 'bc_p_b' )
200	READ ( 13 ) bc_p_b
201	CASE ( 'bc_p_t' )
202	READ ( 13 ) bc_p_t
203	CASE ( 'bc_pt_b' )
204	READ ( 13 ) bc_pt_b
205	CASE ( 'bc_pt_t' )
206	READ ( 13 ) bc_pt_t
207	CASE ( 'bc_pt_t_val' )
208	READ ( 13 ) bc_pt_t_val
209	CASE ( 'bc_q_b' )
210	READ ( 13 ) bc_q_b
211	CASE ( 'bc_q_t' )
212	READ ( 13 ) bc_q_t
213	CASE ( 'bc_q_t_val' )
214	READ ( 13 ) bc_q_t_val
215	CASE ( 'bc_s_b' )
216	READ ( 13 ) bc_s_b
217	CASE ( 'bc_s_t' )
218	READ ( 13 ) bc_s_t
219	CASE ( 'bc_sa_t' )
220	READ ( 13 ) bc_sa_t
221	CASE ( 'bc_uv_b' )
222	READ ( 13 ) bc_uv_b
223	CASE ( 'bc_uv_t' )
224	READ ( 13 ) bc_uv_t
225	CASE ( 'bottom_salinityflux' )
226	READ ( 13 ) bottom_salinityflux
227	CASE ( 'building_height' )
228	READ ( 13 ) building_height
229	CASE ( 'building_length_x' )
230	READ ( 13 ) building_length_x
231	CASE ( 'building_length_y' )
232	READ ( 13 ) building_length_y
233	CASE ( 'building_wall_left' )
234	READ ( 13 ) building_wall_left
235	CASE ( 'building_wall_south' )
236	READ ( 13 ) building_wall_south
237	CASE ( 'canopy_mode' )
238	READ ( 13 ) canopy_mode
239	CASE ( 'canyon_height' )
240	READ ( 13 ) canyon_height
241	CASE ( 'canyon_width_x' )
242	READ ( 13 ) canyon_width_x
243	CASE ( 'canyon_width_y' )
244	READ ( 13 ) canyon_width_y
245	CASE ( 'canyon_wall_left' )
246	READ ( 13 ) canyon_wall_left
247	CASE ( 'canyon_wall_south' )
248	READ ( 13 ) canyon_wall_south
249	CASE ( 'cloud_droplets' )
250	READ ( 13 ) cloud_droplets
251	CASE ( 'cloud_physics' )
252	READ ( 13 ) cloud_physics
253	CASE ( 'conserve_volume_flow' )
254	READ ( 13 ) conserve_volume_flow
255	CASE ( 'conserve_volume_flow_mode' )
256	READ ( 13 ) conserve_volume_flow_mode
257	CASE ( 'coupling_start_time' )
258	READ ( 13 ) coupling_start_time
259	CASE ( 'cthf' )
260	READ ( 13 ) cthf
261	CASE ( 'current_timestep_number' )
262	READ ( 13 ) current_timestep_number
263	CASE ( 'cut_spline_overshoot' )
264	READ ( 13 ) cut_spline_overshoot
265	CASE ( 'damp_level_1d' )
266	READ ( 13 ) damp_level_1d
267	CASE ( 'dissipation_1d' )
268	READ ( 13 ) dissipation_1d
269	CASE ( 'dp_external' )
270	READ ( 13 ) dp_external
271	CASE ( 'dp_level_b' )
272	READ ( 13 ) dp_level_b
273	CASE ( 'dp_smooth' )
274	READ ( 13 ) dp_smooth
275	CASE ( 'dpdxy' )
276	READ ( 13 ) dpdxy
277	CASE ( 'drag_coefficient' )
278	READ ( 13 ) drag_coefficient
279	CASE ( 'dt_fixed' )
280	READ ( 13 ) ldum ! restart files created before rev 333
281	! contained dt_fixed by mistake; it is still
282	! read here in order to allow usage of these
283	! older restart files; can be removed in a
284	! later version
285	CASE ( 'dt_pr_1d' )
286	READ ( 13 ) dt_pr_1d
287	CASE ( 'dt_run_control_1d' )
288	READ ( 13 ) dt_run_control_1d
289	CASE ( 'dt_3d' )
290	READ ( 13 ) dt_3d
291	CASE ( 'dvrp_filecount' )
292	READ ( 13 ) dvrp_filecount
293	CASE ( 'dx' )
294	READ ( 13 ) dx
295	CASE ( 'dy' )
296	READ ( 13 ) dy
297	CASE ( 'dz' )
298	READ ( 13 ) dz
299	CASE ( 'dz_max' )
300	READ ( 13 ) dz_max
301	CASE ( 'dz_stretch_factor' )
302	READ ( 13 ) dz_stretch_factor
303	CASE ( 'dz_stretch_level' )
304	READ ( 13 ) dz_stretch_level
305	CASE ( 'e_min' )
306	READ ( 13 ) e_min
307	CASE ( 'end_time_1d' )
308	READ ( 13 ) end_time_1d
309	CASE ( 'fft_method' )
310	READ ( 13 ) fft_method
311	CASE ( 'first_call_advec_particles' )
312	READ ( 13 ) first_call_advec_particles
313	CASE ( 'galilei_transformation' )
314	READ ( 13 ) galilei_transformation
315	CASE ( 'grid_matching' )
316	READ ( 13 ) grid_matching
317	CASE ( 'hom' )
318	READ ( 13 ) hom
319	CASE ( 'hom_sum' )
320	READ ( 13 ) hom_sum
321	CASE ( 'humidity' )
322	READ ( 13 ) humidity
323	CASE ( 'inflow_damping_factor' )
324	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
325	ALLOCATE( inflow_damping_factor(0:nz+1) )
326	ENDIF
327	READ ( 13 ) inflow_damping_factor
328	CASE ( 'inflow_damping_height' )
329	READ ( 13 ) inflow_damping_height
330	CASE ( 'inflow_damping_width' )
331	READ ( 13 ) inflow_damping_width
332	CASE ( 'inflow_disturbance_begin' )
333	READ ( 13 ) inflow_disturbance_begin
334	CASE ( 'inflow_disturbance_end' )
335	READ ( 13 ) inflow_disturbance_end
336	CASE ( 'km_constant' )
337	READ ( 13 ) km_constant
338	CASE ( 'km_damp_max' )
339	READ ( 13 ) km_damp_max
340	CASE ( 'lad' )
341	READ ( 13 ) lad
342	CASE ( 'lad_surface' )
343	READ ( 13 ) lad_surface
344	CASE ( 'lad_vertical_gradient' )
345	READ ( 13 ) lad_vertical_gradient
346	CASE ( 'lad_vertical_gradient_level' )
347	READ ( 13 ) lad_vertical_gradient_level
348	CASE ( 'lad_vertical_gradient_level_in' )
349	READ ( 13 ) lad_vertical_gradient_level_ind
350	CASE ( 'last_dt_change' )
351	READ ( 13 ) last_dt_change
352	CASE ( 'large_scale_subsidence' )
353	READ ( 13 ) large_scale_subsidence
354	CASE ( 'leaf_surface_concentration' )
355	READ ( 13 ) leaf_surface_concentration
356	CASE ( 'long_filter_factor' )
357	READ ( 13 ) long_filter_factor
358	CASE ( 'loop_optimization' )
359	READ ( 13 ) loop_optimization
360	CASE ( 'mean_inflow_profiles' )
361	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
362	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
363	ENDIF
364	READ ( 13 ) mean_inflow_profiles
365	CASE ( 'mixing_length_1d' )
366	READ ( 13 ) mixing_length_1d
367	CASE ( 'momentum_advec' )
368	READ ( 13 ) momentum_advec
369	CASE ( 'netcdf_precision' )
370	READ ( 13 ) netcdf_precision
371	CASE ( 'nsor_ini' )
372	READ ( 13 ) nsor_ini
373	CASE ( 'nx' )
374	READ ( 13 ) nx
375	nx_on_file = nx
376	CASE ( 'ny' )
377	READ ( 13 ) ny
378	ny_on_file = ny
379	CASE ( 'ocean' )
380	READ ( 13 ) ocean
381	CASE ( 'old_dt' )
382	READ ( 13 ) old_dt
383	CASE ( 'omega' )
384	READ ( 13 ) omega
385	CASE ( 'outflow_damping_width' )
386	READ ( 13 ) outflow_damping_width
387	CASE ( 'output_for_t0' )
388	READ (13) output_for_t0
389	CASE ( 'overshoot_limit_e' )
390	READ ( 13 ) overshoot_limit_e
391	CASE ( 'overshoot_limit_pt' )
392	READ ( 13 ) overshoot_limit_pt
393	CASE ( 'overshoot_limit_u' )
394	READ ( 13 ) overshoot_limit_u
395	CASE ( 'overshoot_limit_v' )
396	READ ( 13 ) overshoot_limit_v
397	CASE ( 'overshoot_limit_w' )
398	READ ( 13 ) overshoot_limit_w
399	CASE ( 'passive_scalar' )
400	READ ( 13 ) passive_scalar
401	CASE ( 'pch_index' )
402	READ ( 13 ) pch_index
403	CASE ( 'phi' )
404	READ ( 13 ) phi
405	CASE ( 'plant_canopy' )
406	READ ( 13 ) plant_canopy
407	CASE ( 'prandtl_layer' )
408	READ ( 13 ) prandtl_layer
409	CASE ( 'precipitation' )
410	READ ( 13 ) precipitation
411	CASE ( 'pt_init' )
412	READ ( 13 ) pt_init
413	CASE ( 'pt_reference' )
414	READ ( 13 ) pt_reference
415	CASE ( 'pt_surface' )
416	READ ( 13 ) pt_surface
417	CASE ( 'pt_surface_initial_change' )
418	READ ( 13 ) pt_surface_initial_change
419	CASE ( 'pt_vertical_gradient' )
420	READ ( 13 ) pt_vertical_gradient
421	CASE ( 'pt_vertical_gradient_level' )
422	READ ( 13 ) pt_vertical_gradient_level
423	CASE ( 'pt_vertical_gradient_level_ind' )
424	READ ( 13 ) pt_vertical_gradient_level_ind
425	CASE ( 'q_init' )
426	READ ( 13 ) q_init
427	CASE ( 'q_surface' )
428	READ ( 13 ) q_surface
429	CASE ( 'q_surface_initial_change' )
430	READ ( 13 ) q_surface_initial_change
431	CASE ( 'q_vertical_gradient' )
432	READ ( 13 ) q_vertical_gradient
433	CASE ( 'q_vertical_gradient_level' )
434	READ ( 13 ) q_vertical_gradient_level
435	CASE ( 'q_vertical_gradient_level_ind' )
436	READ ( 13 ) q_vertical_gradient_level_ind
437	CASE ( 'radiation' )
438	READ ( 13 ) radiation
439	CASE ( 'random_generator' )
440	READ ( 13 ) random_generator
441	CASE ( 'random_heatflux' )
442	READ ( 13 ) random_heatflux
443	CASE ( 'recycling_width' )
444	READ ( 13 ) recycling_width
445	CASE ( 'rif_max' )
446	READ ( 13 ) rif_max
447	CASE ( 'rif_min' )
448	READ ( 13 ) rif_min
449	CASE ( 'roughness_length' )
450	READ ( 13 ) roughness_length
451	CASE ( 'runnr' )
452	READ ( 13 ) runnr
453	CASE ( 'run_coupled' )
454	READ ( 13 ) run_coupled
455	CASE ( 'sa_init' )
456	READ ( 13 ) sa_init
457	CASE ( 'sa_surface' )
458	READ ( 13 ) sa_surface
459	CASE ( 'sa_vertical_gradient' )
460	READ ( 13 ) sa_vertical_gradient
461	CASE ( 'sa_vertical_gradient_level' )
462	READ ( 13 ) sa_vertical_gradient_level
463	CASE ( 'scalar_advec' )
464	READ ( 13 ) scalar_advec
465	CASE ( 'scalar_exchange_coefficient' )
466	READ ( 13 ) scalar_exchange_coefficient
467	CASE ( 'simulated_time' )
468	READ ( 13 ) simulated_time
469	CASE ( 'surface_heatflux' )
470	READ ( 13 ) surface_heatflux
471	CASE ( 'surface_pressure' )
472	READ ( 13 ) surface_pressure
473	CASE ( 'surface_scalarflux' )
474	READ ( 13 ) surface_scalarflux
475	CASE ( 'surface_waterflux' )
476	READ ( 13 ) surface_waterflux
477	CASE ( 's_surface' )
478	READ ( 13 ) s_surface
479	CASE ( 's_surface_initial_change' )
480	READ ( 13 ) s_surface_initial_change
481	CASE ( 's_vertical_gradient' )
482	READ ( 13 ) s_vertical_gradient
483	CASE ( 's_vertical_gradient_level' )
484	READ ( 13 ) s_vertical_gradient_level
485	CASE ( 'time_coupling' )
486	READ ( 13 ) time_coupling
487	CASE ( 'time_disturb' )
488	READ ( 13 ) time_disturb
489	CASE ( 'time_dopr' )
490	READ ( 13 ) time_dopr
491	CASE ( 'time_dopr_av' )
492	READ ( 13 ) time_dopr_av
493	CASE ( 'time_dopr_listing' )
494	READ ( 13 ) time_dopr_listing
495	CASE ( 'time_dopts' )
496	READ ( 13 ) time_dopts
497	CASE ( 'time_dosp' )
498	READ ( 13 ) time_dosp
499	CASE ( 'time_dots' )
500	READ ( 13 ) time_dots
501	CASE ( 'time_do2d_xy' )
502	READ ( 13 ) time_do2d_xy
503	CASE ( 'time_do2d_xz' )
504	READ ( 13 ) time_do2d_xz
505	CASE ( 'time_do2d_yz' )
506	READ ( 13 ) time_do2d_yz
507	CASE ( 'time_do3d' )
508	READ ( 13 ) time_do3d
509	CASE ( 'time_do_av' )
510	READ ( 13 ) time_do_av
511	CASE ( 'time_do_sla' )
512	READ ( 13 ) time_do_sla
513	CASE ( 'time_dvrp' )
514	READ ( 13 ) time_dvrp
515	CASE ( 'time_restart' )
516	READ ( 13 ) time_restart
517	CASE ( 'time_run_control' )
518	READ ( 13 ) time_run_control
519	CASE ( 'time_since_reference_point' )
520	READ ( 13 ) time_since_reference_point
521	CASE ( 'time_sort_particles' )
522	READ ( 13 ) time_sort_particles
523	CASE ( 'timestep_scheme' )
524	READ ( 13 ) timestep_scheme
525	CASE ( 'topography' )
526	READ ( 13 ) topography
527	CASE ( 'topography_grid_convention' )
528	READ ( 13 ) topography_grid_convention
529	CASE ( 'top_heatflux' )
530	READ ( 13 ) top_heatflux
531	CASE ( 'top_momentumflux_u' )
532	READ ( 13 ) top_momentumflux_u
533	CASE ( 'top_momentumflux_v' )
534	READ ( 13 ) top_momentumflux_v
535	CASE ( 'top_salinityflux' )
536	READ ( 13 ) top_salinityflux
537	CASE ( 'tsc' )
538	READ ( 13 ) tsc
539	CASE ( 'turbulent_inflow' )
540	READ ( 13 ) turbulent_inflow
541	CASE ( 'u_bulk' )
542	READ ( 13 ) u_bulk
543	CASE ( 'u_init' )
544	READ ( 13 ) u_init
545	CASE ( 'u_max' )
546	READ ( 13 ) u_max
547	CASE ( 'u_max_ijk' )
548	READ ( 13 ) u_max_ijk
549	CASE ( 'ug' )
550	READ ( 13 ) ug
551	CASE ( 'ug_surface' )
552	READ ( 13 ) ug_surface
553	CASE ( 'ug_vertical_gradient' )
554	READ ( 13 ) ug_vertical_gradient
555	CASE ( 'ug_vertical_gradient_level' )
556	READ ( 13 ) ug_vertical_gradient_level
557	CASE ( 'ug_vertical_gradient_level_ind' )
558	READ ( 13 ) ug_vertical_gradient_level_ind
559	CASE ( 'ups_limit_e' )
560	READ ( 13 ) ups_limit_e
561	CASE ( 'ups_limit_pt' )
562	READ ( 13 ) ups_limit_pt
563	CASE ( 'ups_limit_u' )
564	READ ( 13 ) ups_limit_u
565	CASE ( 'ups_limit_v' )
566	READ ( 13 ) ups_limit_v
567	CASE ( 'ups_limit_w' )
568	READ ( 13 ) ups_limit_w
569	CASE ( 'use_surface_fluxes' )
570	READ ( 13 ) use_surface_fluxes
571	CASE ( 'use_top_fluxes' )
572	READ ( 13 ) use_top_fluxes
573	CASE ( 'use_ug_for_galilei_tr' )
574	READ ( 13 ) use_ug_for_galilei_tr
575	CASE ( 'use_upstream_for_tke' )
576	READ ( 13 ) use_upstream_for_tke
577	CASE ( 'v_bulk' )
578	READ ( 13 ) v_bulk
579	CASE ( 'v_init' )
580	READ ( 13 ) v_init
581	CASE ( 'v_max' )
582	READ ( 13 ) v_max
583	CASE ( 'v_max_ijk' )
584	READ ( 13 ) v_max_ijk
585	CASE ( 'vg' )
586	READ ( 13 ) vg
587	CASE ( 'vg_surface' )
588	READ ( 13 ) vg_surface
589	CASE ( 'vg_vertical_gradient' )
590	READ ( 13 ) vg_vertical_gradient
591	CASE ( 'vg_vertical_gradient_level' )
592	READ ( 13 ) vg_vertical_gradient_level
593	CASE ( 'vg_vertical_gradient_level_ind' )
594	READ ( 13 ) vg_vertical_gradient_level_ind
595	CASE ( 'volume_flow_area' )
596	READ ( 13 ) volume_flow_area
597	CASE ( 'volume_flow_initial' )
598	READ ( 13 ) volume_flow_initial
599	CASE ( 'wall_adjustment' )
600	READ ( 13 ) wall_adjustment
601	CASE ( 'ws_vertical_gradient' )
602	READ ( 13 ) ws_vertical_gradient
603	CASE ( 'ws_vertical_gradient_level' )
604	READ ( 13 ) ws_vertical_gradient_level
605	CASE ( 'ws_vertical_gradient_level_ind' )
606	READ ( 13 ) ws_vertical_gradient_level_ind
607	CASE ( 'w_max' )
608	READ ( 13 ) w_max
609	CASE ( 'w_max_ijk' )
610	READ ( 13 ) w_max_ijk
611
612	CASE DEFAULT
613	WRITE( message_string, * ) 'unknown variable named "', &
614	TRIM( variable_chr ), '" found in', &
615	' data from prior run on PE ', myid
616	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
617	END SELECT
618	!
619	!-- Read next string
620	READ ( 13 ) variable_chr
621
622	ENDDO
623
624
625	END SUBROUTINE read_var_list
626
627
628
629	SUBROUTINE read_parts_of_var_list
630
631	!------------------------------------------------------------------------------!
632	! Description:
633	! ------------
634	! Skipping the global control variables from restart-file (binary format)
635	! except some informations needed when reading restart data from a previous
636	! run which used a smaller total domain or/and a different domain decomposition.
637	!------------------------------------------------------------------------------!
638
639	USE arrays_3d
640	USE control_parameters
641	USE indices
642	USE pegrid
643	USE statistics
644
645	IMPLICIT NONE
646
647	CHARACTER (LEN=10) :: version_on_file
648	CHARACTER (LEN=30) :: variable_chr
649
650	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
651	statistic_regions_on_file, tmp_mpru, tmp_sr
652
653	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
654	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
655
656
657	CALL check_open( 13 )
658
659	WRITE (9,*) 'rpovl: after check open 13'
660	CALL local_flush( 9 )
661	READ ( 13 ) version_on_file
662
663	!
664	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
665	!-- run
666	READ ( 13 ) variable_chr
667	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
668	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
669	'run on PE ', myid
670	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
671	ENDIF
672	READ ( 13 ) numprocs_previous_run
673
674	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
675	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
676	ENDIF
677
678	READ ( 13 ) variable_chr
679	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
680	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
681	'prior run on PE ', myid
682	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
683	ENDIF
684	READ ( 13 ) hor_index_bounds_previous_run
685
686	!
687	!-- Read vertical number of gridpoints and number of different areas used
688	!-- for computing statistics. Allocate arrays depending on these values,
689	!-- which are needed for the following read instructions.
690	READ ( 13 ) variable_chr
691	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
692	message_string = 'nz not found in restart data file'
693	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
694	ENDIF
695	READ ( 13 ) nz_on_file
696	IF ( nz_on_file /= nz ) THEN
697	WRITE( message_string, * ) 'mismatch concerning number of ', &
698	'gridpoints along z', &
699	'&nz on file = "', nz_on_file, '"', &
700	'&nz from run = "', nz, '"'
701	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
702	ENDIF
703
704	READ ( 13 ) variable_chr
705	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
706	message_string = 'max_pr_user not found in restart data file'
707	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
708	ENDIF
709	READ ( 13 ) max_pr_user_on_file
710	IF ( max_pr_user_on_file /= max_pr_user ) THEN
711	WRITE( message_string, * ) 'number of user profiles on res', &
712	'tart data file differs from the current ', &
713	'run&max_pr_user on file = "', &
714	max_pr_user_on_file, '"', &
715	'&max_pr_user from run = "', &
716	max_pr_user, '"'
717	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
718	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
719	ELSE
720	tmp_mpru = max_pr_user
721	ENDIF
722
723	READ ( 13 ) variable_chr
724	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
725	message_string = 'statistic_regions not found in restart data file'
726	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
727	ENDIF
728	READ ( 13 ) statistic_regions_on_file
729	IF ( statistic_regions_on_file /= statistic_regions ) THEN
730	WRITE( message_string, * ) 'statistic regions on restart data file ',&
731	'differ from the current run', &
732	'&statistic regions on file = "', &
733	statistic_regions_on_file, '"', &
734	'&statistic regions from run = "', &
735	statistic_regions, '"', &
736	'&statistic data may be lost!'
737	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
738	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
739	ELSE
740	tmp_sr = statistic_regions
741	ENDIF
742
743
744	!
745	!-- Now read and check some control parameters and skip the rest
746	WRITE (9,*) 'wpovl: begin reading variables'
747	CALL local_flush( 9 )
748	READ ( 13 ) variable_chr
749
750	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
751
752	SELECT CASE ( TRIM( variable_chr ) )
753
754	CASE ( 'average_count_pr' )
755	READ ( 13 ) average_count_pr
756	IF ( average_count_pr /= 0 ) THEN
757	WRITE( message_string, * ) 'inflow profiles not temporally ', &
758	'averaged. &Averaging will be done now using ', &
759	average_count_pr, ' samples.'
760	CALL message( 'read_parts_of_var_list', 'PA0309', &
761	0, 1, 0, 6, 0 )
762	ENDIF
763
764	CASE ( 'hom' )
765	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
766	0:statistic_regions_on_file) )
767	READ ( 13 ) hom_on_file
768	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
769	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
770	DEALLOCATE( hom_on_file )
771
772	CASE ( 'hom_sum' )
773	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
774	0:statistic_regions_on_file) )
775	READ ( 13 ) hom_sum_on_file
776	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
777	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
778	DEALLOCATE( hom_sum_on_file )
779
780	CASE ( 'nx' )
781	READ ( 13 ) nx_on_file
782
783	CASE ( 'ny' )
784	READ ( 13 ) ny_on_file
785
786
787	CASE DEFAULT
788
789	READ ( 13 ) idum
790
791	END SELECT
792
793	READ ( 13 ) variable_chr
794
795	ENDDO
796
797	!
798	!-- Calculate the temporal average of vertical profiles, if neccessary
799	IF ( average_count_pr /= 0 ) THEN
800	hom_sum = hom_sum / REAL( average_count_pr )
801	ENDIF
802
803
804	END SUBROUTINE read_parts_of_var_list
805
806
807
808	SUBROUTINE skip_var_list
809
810	!------------------------------------------------------------------------------!
811	! Description:
812	! ------------
813	! Skipping the global control variables from restart-file (binary format)
814	!------------------------------------------------------------------------------!
815
816	IMPLICIT NONE
817
818	CHARACTER (LEN=10) :: version_on_file
819	CHARACTER (LEN=30) :: variable_chr
820
821	INTEGER :: idum
822
823
824	WRITE (9,*) 'skipvl #1'
825	CALL local_flush( 9 )
826	READ ( 13 ) version_on_file
827
828	WRITE (9,*) 'skipvl before variable_chr'
829	CALL local_flush( 9 )
830	READ ( 13 ) variable_chr
831	WRITE (9,*) 'skipvl after variable_chr'
832	CALL local_flush( 9 )
833
834	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
835
836	WRITE (9,*) 'skipvl chr = ', variable_chr
837	CALL local_flush( 9 )
838	READ ( 13 ) idum
839	READ ( 13 ) variable_chr
840
841	ENDDO
842	WRITE (9,*) 'skipvl last'
843	CALL local_flush( 9 )
844
845
846	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 513

Download in other formats: