Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 420

Last change on this file since 420 was 411, checked in by heinze, 15 years ago
Large scale vertical motion (subsidence/ascent) can be applied to the prognostic equation for the potential temperature
Property svn:keywords set to `Id`
File size: 30.9 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
7	! ws_vertical_gradient_level_ind
8	!
9	! Former revisions:
10	! -----------------
11	! $Id: read_var_list.f90 411 2009-12-11 14:15:58Z franke $
12	!
13	! 345 2009-07-01 14:37:56Z heinze
14	! +output_for_t0
15	! dt_fixed is read into a dummy variable.
16	! Output of messages replaced by message handling routine.
17	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
18	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
19	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
20	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
21	!
22	! 216 2008-11-25 07:12:43Z raasch
23	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
24	!
25	! 173 2008-05-23 20:39:38Z raasch
26	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
27	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
28	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
29	! recycling_width, turbulent_inflow,
30	! -cross_ts_*, npex, npey,
31	! hom_sum, volume_flow_area, volume_flow_initial moved from
32	! read_3d_binary to here,
33	! routines read_parts_of_var_list and skip_var_list added at the end
34	!
35	! 138 2007-11-28 10:03:58Z letzel
36	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
37	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
38	! plant_canopy, time_sort_particles
39	!
40	! 102 2007-07-27 09:09:17Z raasch
41	! +time_coupling, top_momentumflux_u\|v
42	!
43	! 95 2007-06-02 16:48:38Z raasch
44	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
45	! sa_vertical_gradient_level, bottom/top_salinity_flux
46	!
47	! 87 2007-05-22 15:46:47Z raasch
48	! +max_pr_user (version 3.1), var_hom renamed pr_palm
49	!
50	! 75 2007-03-22 09:54:05Z raasch
51	! +loop_optimization, pt_reference, moisture renamed humidity
52	!
53	! 20 2007-02-26 00:12:32Z raasch
54	! +top_heatflux, use_top_fluxes
55	!
56	! RCS Log replace by Id keyword, revision history cleaned up
57	!
58	! Revision 1.34 2006/08/22 14:14:27 raasch
59	! +dz_max
60	!
61	! Revision 1.1 1998/03/18 20:18:48 raasch
62	! Initial revision
63	!
64	!
65	! Description:
66	! ------------
67	! Reading values of global control variables from restart-file (binary format)
68	!------------------------------------------------------------------------------!
69
70	USE arrays_3d
71	USE averaging
72	USE control_parameters
73	USE grid_variables
74	USE indices
75	USE model_1d
76	USE netcdf_control
77	USE particle_attributes
78	USE pegrid
79	USE profil_parameter
80	USE statistics
81
82	IMPLICIT NONE
83
84	CHARACTER (LEN=10) :: binary_version, version_on_file
85	CHARACTER (LEN=30) :: variable_chr
86
87	LOGICAL :: ldum
88
89
90	CALL check_open( 13 )
91
92	!
93	!-- Make version number check first
94	READ ( 13 ) version_on_file
95	binary_version = '3.4'
96	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
97	WRITE( message_string, * ) 'version mismatch concerning control ', &
98	'variables', &
99	'&version on file = "', &
100	TRIM( version_on_file ), '"', &
101	'&version on program = "', &
102	TRIM( binary_version ), '"'
103	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
104	ENDIF
105
106	!
107	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
108	!-- run
109	READ ( 13 ) variable_chr
110	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
111	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
112	'run on PE ', myid
113	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
114	ENDIF
115	READ ( 13 ) numprocs_previous_run
116
117	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
118	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
119	ENDIF
120
121	READ ( 13 ) variable_chr
122	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
123	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
124	'prior run on PE ', myid
125	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
126	ENDIF
127	READ ( 13 ) hor_index_bounds_previous_run
128
129	!
130	!-- Read vertical number of gridpoints and number of different areas used
131	!-- for computing statistics. Allocate arrays depending on these values,
132	!-- which are needed for the following read instructions.
133	READ ( 13 ) variable_chr
134	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
135	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
136	myid
137	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
138	ENDIF
139	READ ( 13 ) nz
140
141	READ ( 13 ) variable_chr
142	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
143	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
144	'prior run on PE ', myid
145	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
146	ENDIF
147	READ ( 13 ) max_pr_user ! This value is checked against the number of
148	! user profiles given for the current run
149	! in routine user_parin (it has to match)
150
151	READ ( 13 ) variable_chr
152	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
153	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
154	'prior run on PE ', myid
155	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
156	ENDIF
157	READ ( 13 ) statistic_regions
158	IF ( .NOT. ALLOCATED( ug ) ) THEN
159	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
160	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
161	sa_init(0:nz+1), &
162	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
163	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
164	ENDIF
165
166	!
167	!-- Now read all control parameters:
168	!-- Caution: When the following read instructions have been changed, the
169	!-- ------- version number stored in the variable binary_version has to be
170	!-- increased. The same changes must also be done in write_var_list.
171	READ ( 13 ) variable_chr
172	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
173
174	SELECT CASE ( TRIM( variable_chr ) )
175
176	CASE ( 'adjust_mixing_length' )
177	READ ( 13 ) adjust_mixing_length
178	CASE ( 'advected_distance_x' )
179	READ ( 13 ) advected_distance_x
180	CASE ( 'advected_distance_y' )
181	READ ( 13 ) advected_distance_y
182	CASE ( 'alpha_surface' )
183	READ ( 13 ) alpha_surface
184	CASE ( 'average_count_pr' )
185	READ ( 13 ) average_count_pr
186	CASE ( 'average_count_sp' )
187	READ ( 13 ) average_count_sp
188	CASE ( 'average_count_3d' )
189	READ ( 13 ) average_count_3d
190	CASE ( 'bc_e_b' )
191	READ ( 13 ) bc_e_b
192	CASE ( 'bc_lr' )
193	READ ( 13 ) bc_lr
194	CASE ( 'bc_ns' )
195	READ ( 13 ) bc_ns
196	CASE ( 'bc_p_b' )
197	READ ( 13 ) bc_p_b
198	CASE ( 'bc_p_t' )
199	READ ( 13 ) bc_p_t
200	CASE ( 'bc_pt_b' )
201	READ ( 13 ) bc_pt_b
202	CASE ( 'bc_pt_t' )
203	READ ( 13 ) bc_pt_t
204	CASE ( 'bc_pt_t_val' )
205	READ ( 13 ) bc_pt_t_val
206	CASE ( 'bc_q_b' )
207	READ ( 13 ) bc_q_b
208	CASE ( 'bc_q_t' )
209	READ ( 13 ) bc_q_t
210	CASE ( 'bc_q_t_val' )
211	READ ( 13 ) bc_q_t_val
212	CASE ( 'bc_s_b' )
213	READ ( 13 ) bc_s_b
214	CASE ( 'bc_s_t' )
215	READ ( 13 ) bc_s_t
216	CASE ( 'bc_sa_t' )
217	READ ( 13 ) bc_sa_t
218	CASE ( 'bc_uv_b' )
219	READ ( 13 ) bc_uv_b
220	CASE ( 'bc_uv_t' )
221	READ ( 13 ) bc_uv_t
222	CASE ( 'bottom_salinityflux' )
223	READ ( 13 ) bottom_salinityflux
224	CASE ( 'building_height' )
225	READ ( 13 ) building_height
226	CASE ( 'building_length_x' )
227	READ ( 13 ) building_length_x
228	CASE ( 'building_length_y' )
229	READ ( 13 ) building_length_y
230	CASE ( 'building_wall_left' )
231	READ ( 13 ) building_wall_left
232	CASE ( 'building_wall_south' )
233	READ ( 13 ) building_wall_south
234	CASE ( 'canopy_mode' )
235	READ ( 13 ) canopy_mode
236	CASE ( 'canyon_height' )
237	READ ( 13 ) canyon_height
238	CASE ( 'canyon_width_x' )
239	READ ( 13 ) canyon_width_x
240	CASE ( 'canyon_width_y' )
241	READ ( 13 ) canyon_width_y
242	CASE ( 'canyon_wall_left' )
243	READ ( 13 ) canyon_wall_left
244	CASE ( 'canyon_wall_south' )
245	READ ( 13 ) canyon_wall_south
246	CASE ( 'cloud_droplets' )
247	READ ( 13 ) cloud_droplets
248	CASE ( 'cloud_physics' )
249	READ ( 13 ) cloud_physics
250	CASE ( 'conserve_volume_flow' )
251	READ ( 13 ) conserve_volume_flow
252	CASE ( 'conserve_volume_flow_mode' )
253	READ ( 13 ) conserve_volume_flow_mode
254	CASE ( 'coupling_start_time' )
255	READ ( 13 ) coupling_start_time
256	CASE ( 'cthf' )
257	READ ( 13 ) cthf
258	CASE ( 'current_timestep_number' )
259	READ ( 13 ) current_timestep_number
260	CASE ( 'cut_spline_overshoot' )
261	READ ( 13 ) cut_spline_overshoot
262	CASE ( 'damp_level_1d' )
263	READ ( 13 ) damp_level_1d
264	CASE ( 'dissipation_1d' )
265	READ ( 13 ) dissipation_1d
266	CASE ( 'dp_external' )
267	READ ( 13 ) dp_external
268	CASE ( 'dp_level_b' )
269	READ ( 13 ) dp_level_b
270	CASE ( 'dp_smooth' )
271	READ ( 13 ) dp_smooth
272	CASE ( 'dpdxy' )
273	READ ( 13 ) dpdxy
274	CASE ( 'drag_coefficient' )
275	READ ( 13 ) drag_coefficient
276	CASE ( 'dt_fixed' )
277	READ ( 13 ) ldum ! restart files created before rev 333
278	! contained dt_fixed by mistake; it is still
279	! read here in order to allow usage of these
280	! older restart files; can be removed in a
281	! later version
282	CASE ( 'dt_pr_1d' )
283	READ ( 13 ) dt_pr_1d
284	CASE ( 'dt_run_control_1d' )
285	READ ( 13 ) dt_run_control_1d
286	CASE ( 'dt_3d' )
287	READ ( 13 ) dt_3d
288	CASE ( 'dvrp_filecount' )
289	READ ( 13 ) dvrp_filecount
290	CASE ( 'dx' )
291	READ ( 13 ) dx
292	CASE ( 'dy' )
293	READ ( 13 ) dy
294	CASE ( 'dz' )
295	READ ( 13 ) dz
296	CASE ( 'dz_max' )
297	READ ( 13 ) dz_max
298	CASE ( 'dz_stretch_factor' )
299	READ ( 13 ) dz_stretch_factor
300	CASE ( 'dz_stretch_level' )
301	READ ( 13 ) dz_stretch_level
302	CASE ( 'e_min' )
303	READ ( 13 ) e_min
304	CASE ( 'end_time_1d' )
305	READ ( 13 ) end_time_1d
306	CASE ( 'fft_method' )
307	READ ( 13 ) fft_method
308	CASE ( 'first_call_advec_particles' )
309	READ ( 13 ) first_call_advec_particles
310	CASE ( 'galilei_transformation' )
311	READ ( 13 ) galilei_transformation
312	CASE ( 'grid_matching' )
313	READ ( 13 ) grid_matching
314	CASE ( 'hom' )
315	READ ( 13 ) hom
316	CASE ( 'hom_sum' )
317	READ ( 13 ) hom_sum
318	CASE ( 'humidity' )
319	READ ( 13 ) humidity
320	CASE ( 'inflow_damping_factor' )
321	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
322	ALLOCATE( inflow_damping_factor(0:nz+1) )
323	ENDIF
324	READ ( 13 ) inflow_damping_factor
325	CASE ( 'inflow_damping_height' )
326	READ ( 13 ) inflow_damping_height
327	CASE ( 'inflow_damping_width' )
328	READ ( 13 ) inflow_damping_width
329	CASE ( 'inflow_disturbance_begin' )
330	READ ( 13 ) inflow_disturbance_begin
331	CASE ( 'inflow_disturbance_end' )
332	READ ( 13 ) inflow_disturbance_end
333	CASE ( 'km_constant' )
334	READ ( 13 ) km_constant
335	CASE ( 'km_damp_max' )
336	READ ( 13 ) km_damp_max
337	CASE ( 'lad' )
338	READ ( 13 ) lad
339	CASE ( 'lad_surface' )
340	READ ( 13 ) lad_surface
341	CASE ( 'lad_vertical_gradient' )
342	READ ( 13 ) lad_vertical_gradient
343	CASE ( 'lad_vertical_gradient_level' )
344	READ ( 13 ) lad_vertical_gradient_level
345	CASE ( 'lad_vertical_gradient_level_in' )
346	READ ( 13 ) lad_vertical_gradient_level_ind
347	CASE ( 'last_dt_change' )
348	READ ( 13 ) last_dt_change
349	CASE ( 'large_scale_subsidence' )
350	READ ( 13 ) large_scale_subsidence
351	CASE ( 'leaf_surface_concentration' )
352	READ ( 13 ) leaf_surface_concentration
353	CASE ( 'long_filter_factor' )
354	READ ( 13 ) long_filter_factor
355	CASE ( 'loop_optimization' )
356	READ ( 13 ) loop_optimization
357	CASE ( 'mean_inflow_profiles' )
358	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
359	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
360	ENDIF
361	READ ( 13 ) mean_inflow_profiles
362	CASE ( 'mixing_length_1d' )
363	READ ( 13 ) mixing_length_1d
364	CASE ( 'momentum_advec' )
365	READ ( 13 ) momentum_advec
366	CASE ( 'netcdf_precision' )
367	READ ( 13 ) netcdf_precision
368	CASE ( 'nsor_ini' )
369	READ ( 13 ) nsor_ini
370	CASE ( 'nx' )
371	READ ( 13 ) nx
372	nx_on_file = nx
373	CASE ( 'ny' )
374	READ ( 13 ) ny
375	ny_on_file = ny
376	CASE ( 'ocean' )
377	READ ( 13 ) ocean
378	CASE ( 'old_dt' )
379	READ ( 13 ) old_dt
380	CASE ( 'omega' )
381	READ ( 13 ) omega
382	CASE ( 'outflow_damping_width' )
383	READ ( 13 ) outflow_damping_width
384	CASE ( 'output_for_t0' )
385	READ (13) output_for_t0
386	CASE ( 'overshoot_limit_e' )
387	READ ( 13 ) overshoot_limit_e
388	CASE ( 'overshoot_limit_pt' )
389	READ ( 13 ) overshoot_limit_pt
390	CASE ( 'overshoot_limit_u' )
391	READ ( 13 ) overshoot_limit_u
392	CASE ( 'overshoot_limit_v' )
393	READ ( 13 ) overshoot_limit_v
394	CASE ( 'overshoot_limit_w' )
395	READ ( 13 ) overshoot_limit_w
396	CASE ( 'passive_scalar' )
397	READ ( 13 ) passive_scalar
398	CASE ( 'pch_index' )
399	READ ( 13 ) pch_index
400	CASE ( 'phi' )
401	READ ( 13 ) phi
402	CASE ( 'plant_canopy' )
403	READ ( 13 ) plant_canopy
404	CASE ( 'prandtl_layer' )
405	READ ( 13 ) prandtl_layer
406	CASE ( 'precipitation' )
407	READ ( 13 ) precipitation
408	CASE ( 'pt_init' )
409	READ ( 13 ) pt_init
410	CASE ( 'pt_reference' )
411	READ ( 13 ) pt_reference
412	CASE ( 'pt_surface' )
413	READ ( 13 ) pt_surface
414	CASE ( 'pt_surface_initial_change' )
415	READ ( 13 ) pt_surface_initial_change
416	CASE ( 'pt_vertical_gradient' )
417	READ ( 13 ) pt_vertical_gradient
418	CASE ( 'pt_vertical_gradient_level' )
419	READ ( 13 ) pt_vertical_gradient_level
420	CASE ( 'pt_vertical_gradient_level_ind' )
421	READ ( 13 ) pt_vertical_gradient_level_ind
422	CASE ( 'q_init' )
423	READ ( 13 ) q_init
424	CASE ( 'q_surface' )
425	READ ( 13 ) q_surface
426	CASE ( 'q_surface_initial_change' )
427	READ ( 13 ) q_surface_initial_change
428	CASE ( 'q_vertical_gradient' )
429	READ ( 13 ) q_vertical_gradient
430	CASE ( 'q_vertical_gradient_level' )
431	READ ( 13 ) q_vertical_gradient_level
432	CASE ( 'q_vertical_gradient_level_ind' )
433	READ ( 13 ) q_vertical_gradient_level_ind
434	CASE ( 'radiation' )
435	READ ( 13 ) radiation
436	CASE ( 'random_generator' )
437	READ ( 13 ) random_generator
438	CASE ( 'random_heatflux' )
439	READ ( 13 ) random_heatflux
440	CASE ( 'recycling_width' )
441	READ ( 13 ) recycling_width
442	CASE ( 'rif_max' )
443	READ ( 13 ) rif_max
444	CASE ( 'rif_min' )
445	READ ( 13 ) rif_min
446	CASE ( 'roughness_length' )
447	READ ( 13 ) roughness_length
448	CASE ( 'runnr' )
449	READ ( 13 ) runnr
450	CASE ( 'run_coupled' )
451	READ ( 13 ) run_coupled
452	CASE ( 'sa_init' )
453	READ ( 13 ) sa_init
454	CASE ( 'sa_surface' )
455	READ ( 13 ) sa_surface
456	CASE ( 'sa_vertical_gradient' )
457	READ ( 13 ) sa_vertical_gradient
458	CASE ( 'sa_vertical_gradient_level' )
459	READ ( 13 ) sa_vertical_gradient_level
460	CASE ( 'scalar_advec' )
461	READ ( 13 ) scalar_advec
462	CASE ( 'scalar_exchange_coefficient' )
463	READ ( 13 ) scalar_exchange_coefficient
464	CASE ( 'simulated_time' )
465	READ ( 13 ) simulated_time
466	CASE ( 'surface_heatflux' )
467	READ ( 13 ) surface_heatflux
468	CASE ( 'surface_pressure' )
469	READ ( 13 ) surface_pressure
470	CASE ( 'surface_scalarflux' )
471	READ ( 13 ) surface_scalarflux
472	CASE ( 'surface_waterflux' )
473	READ ( 13 ) surface_waterflux
474	CASE ( 's_surface' )
475	READ ( 13 ) s_surface
476	CASE ( 's_surface_initial_change' )
477	READ ( 13 ) s_surface_initial_change
478	CASE ( 's_vertical_gradient' )
479	READ ( 13 ) s_vertical_gradient
480	CASE ( 's_vertical_gradient_level' )
481	READ ( 13 ) s_vertical_gradient_level
482	CASE ( 'time_coupling' )
483	READ ( 13 ) time_coupling
484	CASE ( 'time_disturb' )
485	READ ( 13 ) time_disturb
486	CASE ( 'time_dopr' )
487	READ ( 13 ) time_dopr
488	CASE ( 'time_dopr_av' )
489	READ ( 13 ) time_dopr_av
490	CASE ( 'time_dopr_listing' )
491	READ ( 13 ) time_dopr_listing
492	CASE ( 'time_dopts' )
493	READ ( 13 ) time_dopts
494	CASE ( 'time_dosp' )
495	READ ( 13 ) time_dosp
496	CASE ( 'time_dots' )
497	READ ( 13 ) time_dots
498	CASE ( 'time_do2d_xy' )
499	READ ( 13 ) time_do2d_xy
500	CASE ( 'time_do2d_xz' )
501	READ ( 13 ) time_do2d_xz
502	CASE ( 'time_do2d_yz' )
503	READ ( 13 ) time_do2d_yz
504	CASE ( 'time_do3d' )
505	READ ( 13 ) time_do3d
506	CASE ( 'time_do_av' )
507	READ ( 13 ) time_do_av
508	CASE ( 'time_do_sla' )
509	READ ( 13 ) time_do_sla
510	CASE ( 'time_dvrp' )
511	READ ( 13 ) time_dvrp
512	CASE ( 'time_restart' )
513	READ ( 13 ) time_restart
514	CASE ( 'time_run_control' )
515	READ ( 13 ) time_run_control
516	CASE ( 'time_since_reference_point' )
517	READ ( 13 ) time_since_reference_point
518	CASE ( 'time_sort_particles' )
519	READ ( 13 ) time_sort_particles
520	CASE ( 'timestep_scheme' )
521	READ ( 13 ) timestep_scheme
522	CASE ( 'topography' )
523	READ ( 13 ) topography
524	CASE ( 'topography_grid_convention' )
525	READ ( 13 ) topography_grid_convention
526	CASE ( 'top_heatflux' )
527	READ ( 13 ) top_heatflux
528	CASE ( 'top_momentumflux_u' )
529	READ ( 13 ) top_momentumflux_u
530	CASE ( 'top_momentumflux_v' )
531	READ ( 13 ) top_momentumflux_v
532	CASE ( 'top_salinityflux' )
533	READ ( 13 ) top_salinityflux
534	CASE ( 'tsc' )
535	READ ( 13 ) tsc
536	CASE ( 'turbulent_inflow' )
537	READ ( 13 ) turbulent_inflow
538	CASE ( 'u_bulk' )
539	READ ( 13 ) u_bulk
540	CASE ( 'u_init' )
541	READ ( 13 ) u_init
542	CASE ( 'u_max' )
543	READ ( 13 ) u_max
544	CASE ( 'u_max_ijk' )
545	READ ( 13 ) u_max_ijk
546	CASE ( 'ug' )
547	READ ( 13 ) ug
548	CASE ( 'ug_surface' )
549	READ ( 13 ) ug_surface
550	CASE ( 'ug_vertical_gradient' )
551	READ ( 13 ) ug_vertical_gradient
552	CASE ( 'ug_vertical_gradient_level' )
553	READ ( 13 ) ug_vertical_gradient_level
554	CASE ( 'ug_vertical_gradient_level_ind' )
555	READ ( 13 ) ug_vertical_gradient_level_ind
556	CASE ( 'ups_limit_e' )
557	READ ( 13 ) ups_limit_e
558	CASE ( 'ups_limit_pt' )
559	READ ( 13 ) ups_limit_pt
560	CASE ( 'ups_limit_u' )
561	READ ( 13 ) ups_limit_u
562	CASE ( 'ups_limit_v' )
563	READ ( 13 ) ups_limit_v
564	CASE ( 'ups_limit_w' )
565	READ ( 13 ) ups_limit_w
566	CASE ( 'use_surface_fluxes' )
567	READ ( 13 ) use_surface_fluxes
568	CASE ( 'use_top_fluxes' )
569	READ ( 13 ) use_top_fluxes
570	CASE ( 'use_ug_for_galilei_tr' )
571	READ ( 13 ) use_ug_for_galilei_tr
572	CASE ( 'use_upstream_for_tke' )
573	READ ( 13 ) use_upstream_for_tke
574	CASE ( 'v_bulk' )
575	READ ( 13 ) v_bulk
576	CASE ( 'v_init' )
577	READ ( 13 ) v_init
578	CASE ( 'v_max' )
579	READ ( 13 ) v_max
580	CASE ( 'v_max_ijk' )
581	READ ( 13 ) v_max_ijk
582	CASE ( 'vg' )
583	READ ( 13 ) vg
584	CASE ( 'vg_surface' )
585	READ ( 13 ) vg_surface
586	CASE ( 'vg_vertical_gradient' )
587	READ ( 13 ) vg_vertical_gradient
588	CASE ( 'vg_vertical_gradient_level' )
589	READ ( 13 ) vg_vertical_gradient_level
590	CASE ( 'vg_vertical_gradient_level_ind' )
591	READ ( 13 ) vg_vertical_gradient_level_ind
592	CASE ( 'volume_flow_area' )
593	READ ( 13 ) volume_flow_area
594	CASE ( 'volume_flow_initial' )
595	READ ( 13 ) volume_flow_initial
596	CASE ( 'wall_adjustment' )
597	READ ( 13 ) wall_adjustment
598	CASE ( 'ws_vertical_gradient' )
599	READ ( 13 ) ws_vertical_gradient
600	CASE ( 'ws_vertical_gradient_level' )
601	READ ( 13 ) ws_vertical_gradient_level
602	CASE ( 'ws_vertical_gradient_level_ind' )
603	READ ( 13 ) ws_vertical_gradient_level_ind
604	CASE ( 'w_max' )
605	READ ( 13 ) w_max
606	CASE ( 'w_max_ijk' )
607	READ ( 13 ) w_max_ijk
608
609	CASE DEFAULT
610	WRITE( message_string, * ) 'unknown variable named "', &
611	TRIM( variable_chr ), '" found in', &
612	' data from prior run on PE ', myid
613	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
614	END SELECT
615	!
616	!-- Read next string
617	READ ( 13 ) variable_chr
618
619	ENDDO
620
621
622	END SUBROUTINE read_var_list
623
624
625
626	SUBROUTINE read_parts_of_var_list
627
628	!------------------------------------------------------------------------------!
629	! Description:
630	! ------------
631	! Skipping the global control variables from restart-file (binary format)
632	! except some informations needed when reading restart data from a previous
633	! run which used a smaller total domain or/and a different domain decomposition.
634	!------------------------------------------------------------------------------!
635
636	USE arrays_3d
637	USE control_parameters
638	USE indices
639	USE pegrid
640	USE statistics
641
642	IMPLICIT NONE
643
644	CHARACTER (LEN=10) :: version_on_file
645	CHARACTER (LEN=30) :: variable_chr
646
647	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
648	statistic_regions_on_file, tmp_mpru, tmp_sr
649
650	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
651	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
652
653
654	CALL check_open( 13 )
655
656	WRITE (9,*) 'rpovl: after check open 13'
657	CALL local_flush( 9 )
658	READ ( 13 ) version_on_file
659
660	!
661	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
662	!-- run
663	READ ( 13 ) variable_chr
664	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
665	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
666	'run on PE ', myid
667	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
668	ENDIF
669	READ ( 13 ) numprocs_previous_run
670
671	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
672	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
673	ENDIF
674
675	READ ( 13 ) variable_chr
676	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
677	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
678	'prior run on PE ', myid
679	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
680	ENDIF
681	READ ( 13 ) hor_index_bounds_previous_run
682
683	!
684	!-- Read vertical number of gridpoints and number of different areas used
685	!-- for computing statistics. Allocate arrays depending on these values,
686	!-- which are needed for the following read instructions.
687	READ ( 13 ) variable_chr
688	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
689	message_string = 'nz not found in restart data file'
690	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
691	ENDIF
692	READ ( 13 ) nz_on_file
693	IF ( nz_on_file /= nz ) THEN
694	WRITE( message_string, * ) 'mismatch concerning number of ', &
695	'gridpoints along z', &
696	'&nz on file = "', nz_on_file, '"', &
697	'&nz from run = "', nz, '"'
698	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
699	ENDIF
700
701	READ ( 13 ) variable_chr
702	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
703	message_string = 'max_pr_user not found in restart data file'
704	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
705	ENDIF
706	READ ( 13 ) max_pr_user_on_file
707	IF ( max_pr_user_on_file /= max_pr_user ) THEN
708	WRITE( message_string, * ) 'number of user profiles on res', &
709	'tart data file differs from the current ', &
710	'run&max_pr_user on file = "', &
711	max_pr_user_on_file, '"', &
712	'&max_pr_user from run = "', &
713	max_pr_user, '"'
714	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
715	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
716	ELSE
717	tmp_mpru = max_pr_user
718	ENDIF
719
720	READ ( 13 ) variable_chr
721	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
722	message_string = 'statistic_regions not found in restart data file'
723	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
724	ENDIF
725	READ ( 13 ) statistic_regions_on_file
726	IF ( statistic_regions_on_file /= statistic_regions ) THEN
727	WRITE( message_string, * ) 'statistic regions on restart data file ',&
728	'differ from the current run', &
729	'&statistic regions on file = "', &
730	statistic_regions_on_file, '"', &
731	'&statistic regions from run = "', &
732	statistic_regions, '"', &
733	'&statistic data may be lost!'
734	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
735	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
736	ELSE
737	tmp_sr = statistic_regions
738	ENDIF
739
740
741	!
742	!-- Now read and check some control parameters and skip the rest
743	WRITE (9,*) 'wpovl: begin reading variables'
744	CALL local_flush( 9 )
745	READ ( 13 ) variable_chr
746
747	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
748
749	SELECT CASE ( TRIM( variable_chr ) )
750
751	CASE ( 'average_count_pr' )
752	READ ( 13 ) average_count_pr
753	IF ( average_count_pr /= 0 ) THEN
754	WRITE( message_string, * ) 'inflow profiles not temporally ', &
755	'averaged. &Averaging will be done now using ', &
756	average_count_pr, ' samples.'
757	CALL message( 'read_parts_of_var_list', 'PA0309', &
758	0, 1, 0, 6, 0 )
759	ENDIF
760
761	CASE ( 'hom' )
762	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
763	0:statistic_regions_on_file) )
764	READ ( 13 ) hom_on_file
765	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
766	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
767	DEALLOCATE( hom_on_file )
768
769	CASE ( 'hom_sum' )
770	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
771	0:statistic_regions_on_file) )
772	READ ( 13 ) hom_sum_on_file
773	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
774	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
775	DEALLOCATE( hom_sum_on_file )
776
777	CASE ( 'nx' )
778	READ ( 13 ) nx_on_file
779
780	CASE ( 'ny' )
781	READ ( 13 ) ny_on_file
782
783
784	CASE DEFAULT
785
786	READ ( 13 ) idum
787
788	END SELECT
789
790	READ ( 13 ) variable_chr
791
792	ENDDO
793
794	!
795	!-- Calculate the temporal average of vertical profiles, if neccessary
796	IF ( average_count_pr /= 0 ) THEN
797	hom_sum = hom_sum / REAL( average_count_pr )
798	ENDIF
799
800
801	END SUBROUTINE read_parts_of_var_list
802
803
804
805	SUBROUTINE skip_var_list
806
807	!------------------------------------------------------------------------------!
808	! Description:
809	! ------------
810	! Skipping the global control variables from restart-file (binary format)
811	!------------------------------------------------------------------------------!
812
813	IMPLICIT NONE
814
815	CHARACTER (LEN=10) :: version_on_file
816	CHARACTER (LEN=30) :: variable_chr
817
818	INTEGER :: idum
819
820
821	WRITE (9,*) 'skipvl #1'
822	CALL local_flush( 9 )
823	READ ( 13 ) version_on_file
824
825	WRITE (9,*) 'skipvl before variable_chr'
826	CALL local_flush( 9 )
827	READ ( 13 ) variable_chr
828	WRITE (9,*) 'skipvl after variable_chr'
829	CALL local_flush( 9 )
830
831	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
832
833	WRITE (9,*) 'skipvl chr = ', variable_chr
834	CALL local_flush( 9 )
835	READ ( 13 ) idum
836	READ ( 13 ) variable_chr
837
838	ENDDO
839	WRITE (9,*) 'skipvl last'
840	CALL local_flush( 9 )
841
842
843	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |