Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 364

Last change on this file since 364 was 345, checked in by heinze, 15 years ago
In case of restart runs without extension, initial profiles are not written to NetCDF-file anymore.
Property svn:keywords set to `Id`
File size: 30.4 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! +output_for_t0
7	! dt_fixed is read into a dummy variable.
8	! Output of messages replaced by message handling routine.
9	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
10	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
11	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
12	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
13	!
14	! Former revisions:
15	! -----------------
16	! $Id: read_var_list.f90 345 2009-07-01 14:37:56Z letzel $
17	!
18	! 216 2008-11-25 07:12:43Z raasch
19	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
20	!
21	! 173 2008-05-23 20:39:38Z raasch
22	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
23	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
24	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
25	! recycling_width, turbulent_inflow,
26	! -cross_ts_*, npex, npey,
27	! hom_sum, volume_flow_area, volume_flow_initial moved from
28	! read_3d_binary to here,
29	! routines read_parts_of_var_list and skip_var_list added at the end
30	!
31	! 138 2007-11-28 10:03:58Z letzel
32	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
33	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
34	! plant_canopy, time_sort_particles
35	!
36	! 102 2007-07-27 09:09:17Z raasch
37	! +time_coupling, top_momentumflux_u\|v
38	!
39	! 95 2007-06-02 16:48:38Z raasch
40	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
41	! sa_vertical_gradient_level, bottom/top_salinity_flux
42	!
43	! 87 2007-05-22 15:46:47Z raasch
44	! +max_pr_user (version 3.1), var_hom renamed pr_palm
45	!
46	! 75 2007-03-22 09:54:05Z raasch
47	! +loop_optimization, pt_reference, moisture renamed humidity
48	!
49	! 20 2007-02-26 00:12:32Z raasch
50	! +top_heatflux, use_top_fluxes
51	!
52	! RCS Log replace by Id keyword, revision history cleaned up
53	!
54	! Revision 1.34 2006/08/22 14:14:27 raasch
55	! +dz_max
56	!
57	! Revision 1.1 1998/03/18 20:18:48 raasch
58	! Initial revision
59	!
60	!
61	! Description:
62	! ------------
63	! Reading values of global control variables from restart-file (binary format)
64	!------------------------------------------------------------------------------!
65
66	USE arrays_3d
67	USE averaging
68	USE control_parameters
69	USE grid_variables
70	USE indices
71	USE model_1d
72	USE netcdf_control
73	USE particle_attributes
74	USE pegrid
75	USE profil_parameter
76	USE statistics
77
78	IMPLICIT NONE
79
80	CHARACTER (LEN=10) :: binary_version, version_on_file
81	CHARACTER (LEN=30) :: variable_chr
82
83	LOGICAL :: ldum
84
85
86	CALL check_open( 13 )
87
88	!
89	!-- Make version number check first
90	READ ( 13 ) version_on_file
91	binary_version = '3.4'
92	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
93	WRITE( message_string, * ) 'version mismatch concerning control ', &
94	'variables', &
95	'&version on file = "', &
96	TRIM( version_on_file ), '"', &
97	'&version on program = "', &
98	TRIM( binary_version ), '"'
99	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
100	ENDIF
101
102	!
103	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
104	!-- run
105	READ ( 13 ) variable_chr
106	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
107	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
108	'run on PE ', myid
109	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
110	ENDIF
111	READ ( 13 ) numprocs_previous_run
112
113	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
114	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
115	ENDIF
116
117	READ ( 13 ) variable_chr
118	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
119	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
120	'prior run on PE ', myid
121	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
122	ENDIF
123	READ ( 13 ) hor_index_bounds_previous_run
124
125	!
126	!-- Read vertical number of gridpoints and number of different areas used
127	!-- for computing statistics. Allocate arrays depending on these values,
128	!-- which are needed for the following read instructions.
129	READ ( 13 ) variable_chr
130	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
131	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
132	myid
133	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
134	ENDIF
135	READ ( 13 ) nz
136
137	READ ( 13 ) variable_chr
138	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
139	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
140	'prior run on PE ', myid
141	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
142	ENDIF
143	READ ( 13 ) max_pr_user ! This value is checked against the number of
144	! user profiles given for the current run
145	! in routine user_parin (it has to match)
146
147	READ ( 13 ) variable_chr
148	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
149	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
150	'prior run on PE ', myid
151	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
152	ENDIF
153	READ ( 13 ) statistic_regions
154	IF ( .NOT. ALLOCATED( ug ) ) THEN
155	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
156	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
157	sa_init(0:nz+1), &
158	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
159	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
160	ENDIF
161
162	!
163	!-- Now read all control parameters:
164	!-- Caution: When the following read instructions have been changed, the
165	!-- ------- version number stored in the variable binary_version has to be
166	!-- increased. The same changes must also be done in write_var_list.
167	READ ( 13 ) variable_chr
168	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
169
170	SELECT CASE ( TRIM( variable_chr ) )
171
172	CASE ( 'adjust_mixing_length' )
173	READ ( 13 ) adjust_mixing_length
174	CASE ( 'advected_distance_x' )
175	READ ( 13 ) advected_distance_x
176	CASE ( 'advected_distance_y' )
177	READ ( 13 ) advected_distance_y
178	CASE ( 'alpha_surface' )
179	READ ( 13 ) alpha_surface
180	CASE ( 'average_count_pr' )
181	READ ( 13 ) average_count_pr
182	CASE ( 'average_count_sp' )
183	READ ( 13 ) average_count_sp
184	CASE ( 'average_count_3d' )
185	READ ( 13 ) average_count_3d
186	CASE ( 'bc_e_b' )
187	READ ( 13 ) bc_e_b
188	CASE ( 'bc_lr' )
189	READ ( 13 ) bc_lr
190	CASE ( 'bc_ns' )
191	READ ( 13 ) bc_ns
192	CASE ( 'bc_p_b' )
193	READ ( 13 ) bc_p_b
194	CASE ( 'bc_p_t' )
195	READ ( 13 ) bc_p_t
196	CASE ( 'bc_pt_b' )
197	READ ( 13 ) bc_pt_b
198	CASE ( 'bc_pt_t' )
199	READ ( 13 ) bc_pt_t
200	CASE ( 'bc_pt_t_val' )
201	READ ( 13 ) bc_pt_t_val
202	CASE ( 'bc_q_b' )
203	READ ( 13 ) bc_q_b
204	CASE ( 'bc_q_t' )
205	READ ( 13 ) bc_q_t
206	CASE ( 'bc_q_t_val' )
207	READ ( 13 ) bc_q_t_val
208	CASE ( 'bc_s_b' )
209	READ ( 13 ) bc_s_b
210	CASE ( 'bc_s_t' )
211	READ ( 13 ) bc_s_t
212	CASE ( 'bc_sa_t' )
213	READ ( 13 ) bc_sa_t
214	CASE ( 'bc_uv_b' )
215	READ ( 13 ) bc_uv_b
216	CASE ( 'bc_uv_t' )
217	READ ( 13 ) bc_uv_t
218	CASE ( 'bottom_salinityflux' )
219	READ ( 13 ) bottom_salinityflux
220	CASE ( 'building_height' )
221	READ ( 13 ) building_height
222	CASE ( 'building_length_x' )
223	READ ( 13 ) building_length_x
224	CASE ( 'building_length_y' )
225	READ ( 13 ) building_length_y
226	CASE ( 'building_wall_left' )
227	READ ( 13 ) building_wall_left
228	CASE ( 'building_wall_south' )
229	READ ( 13 ) building_wall_south
230	CASE ( 'canopy_mode' )
231	READ ( 13 ) canopy_mode
232	CASE ( 'canyon_height' )
233	READ ( 13 ) canyon_height
234	CASE ( 'canyon_width_x' )
235	READ ( 13 ) canyon_width_x
236	CASE ( 'canyon_width_y' )
237	READ ( 13 ) canyon_width_y
238	CASE ( 'canyon_wall_left' )
239	READ ( 13 ) canyon_wall_left
240	CASE ( 'canyon_wall_south' )
241	READ ( 13 ) canyon_wall_south
242	CASE ( 'cloud_droplets' )
243	READ ( 13 ) cloud_droplets
244	CASE ( 'cloud_physics' )
245	READ ( 13 ) cloud_physics
246	CASE ( 'conserve_volume_flow' )
247	READ ( 13 ) conserve_volume_flow
248	CASE ( 'conserve_volume_flow_mode' )
249	READ ( 13 ) conserve_volume_flow_mode
250	CASE ( 'coupling_start_time' )
251	READ ( 13 ) coupling_start_time
252	CASE ( 'cthf' )
253	READ ( 13 ) cthf
254	CASE ( 'current_timestep_number' )
255	READ ( 13 ) current_timestep_number
256	CASE ( 'cut_spline_overshoot' )
257	READ ( 13 ) cut_spline_overshoot
258	CASE ( 'damp_level_1d' )
259	READ ( 13 ) damp_level_1d
260	CASE ( 'dissipation_1d' )
261	READ ( 13 ) dissipation_1d
262	CASE ( 'dp_external' )
263	READ ( 13 ) dp_external
264	CASE ( 'dp_level_b' )
265	READ ( 13 ) dp_level_b
266	CASE ( 'dp_smooth' )
267	READ ( 13 ) dp_smooth
268	CASE ( 'dpdxy' )
269	READ ( 13 ) dpdxy
270	CASE ( 'drag_coefficient' )
271	READ ( 13 ) drag_coefficient
272	CASE ( 'dt_fixed' )
273	READ ( 13 ) ldum ! restart files created before rev 333
274	! contained dt_fixed by mistake; it is still
275	! read here in order to allow usage of these
276	! older restart files; can be removed in a
277	! later version
278	CASE ( 'dt_pr_1d' )
279	READ ( 13 ) dt_pr_1d
280	CASE ( 'dt_run_control_1d' )
281	READ ( 13 ) dt_run_control_1d
282	CASE ( 'dt_3d' )
283	READ ( 13 ) dt_3d
284	CASE ( 'dvrp_filecount' )
285	READ ( 13 ) dvrp_filecount
286	CASE ( 'dx' )
287	READ ( 13 ) dx
288	CASE ( 'dy' )
289	READ ( 13 ) dy
290	CASE ( 'dz' )
291	READ ( 13 ) dz
292	CASE ( 'dz_max' )
293	READ ( 13 ) dz_max
294	CASE ( 'dz_stretch_factor' )
295	READ ( 13 ) dz_stretch_factor
296	CASE ( 'dz_stretch_level' )
297	READ ( 13 ) dz_stretch_level
298	CASE ( 'e_min' )
299	READ ( 13 ) e_min
300	CASE ( 'end_time_1d' )
301	READ ( 13 ) end_time_1d
302	CASE ( 'fft_method' )
303	READ ( 13 ) fft_method
304	CASE ( 'first_call_advec_particles' )
305	READ ( 13 ) first_call_advec_particles
306	CASE ( 'galilei_transformation' )
307	READ ( 13 ) galilei_transformation
308	CASE ( 'grid_matching' )
309	READ ( 13 ) grid_matching
310	CASE ( 'hom' )
311	READ ( 13 ) hom
312	CASE ( 'hom_sum' )
313	READ ( 13 ) hom_sum
314	CASE ( 'humidity' )
315	READ ( 13 ) humidity
316	CASE ( 'inflow_damping_factor' )
317	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
318	ALLOCATE( inflow_damping_factor(0:nz+1) )
319	ENDIF
320	READ ( 13 ) inflow_damping_factor
321	CASE ( 'inflow_damping_height' )
322	READ ( 13 ) inflow_damping_height
323	CASE ( 'inflow_damping_width' )
324	READ ( 13 ) inflow_damping_width
325	CASE ( 'inflow_disturbance_begin' )
326	READ ( 13 ) inflow_disturbance_begin
327	CASE ( 'inflow_disturbance_end' )
328	READ ( 13 ) inflow_disturbance_end
329	CASE ( 'km_constant' )
330	READ ( 13 ) km_constant
331	CASE ( 'km_damp_max' )
332	READ ( 13 ) km_damp_max
333	CASE ( 'lad' )
334	READ ( 13 ) lad
335	CASE ( 'lad_surface' )
336	READ ( 13 ) lad_surface
337	CASE ( 'lad_vertical_gradient' )
338	READ ( 13 ) lad_vertical_gradient
339	CASE ( 'lad_vertical_gradient_level' )
340	READ ( 13 ) lad_vertical_gradient_level
341	CASE ( 'lad_vertical_gradient_level_in' )
342	READ ( 13 ) lad_vertical_gradient_level_ind
343	CASE ( 'last_dt_change' )
344	READ ( 13 ) last_dt_change
345	CASE ( 'leaf_surface_concentration' )
346	READ ( 13 ) leaf_surface_concentration
347	CASE ( 'long_filter_factor' )
348	READ ( 13 ) long_filter_factor
349	CASE ( 'loop_optimization' )
350	READ ( 13 ) loop_optimization
351	CASE ( 'mean_inflow_profiles' )
352	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
353	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
354	ENDIF
355	READ ( 13 ) mean_inflow_profiles
356	CASE ( 'mixing_length_1d' )
357	READ ( 13 ) mixing_length_1d
358	CASE ( 'momentum_advec' )
359	READ ( 13 ) momentum_advec
360	CASE ( 'netcdf_precision' )
361	READ ( 13 ) netcdf_precision
362	CASE ( 'nsor_ini' )
363	READ ( 13 ) nsor_ini
364	CASE ( 'nx' )
365	READ ( 13 ) nx
366	nx_on_file = nx
367	CASE ( 'ny' )
368	READ ( 13 ) ny
369	ny_on_file = ny
370	CASE ( 'ocean' )
371	READ ( 13 ) ocean
372	CASE ( 'old_dt' )
373	READ ( 13 ) old_dt
374	CASE ( 'omega' )
375	READ ( 13 ) omega
376	CASE ( 'outflow_damping_width' )
377	READ ( 13 ) outflow_damping_width
378	CASE ( 'output_for_t0' )
379	READ (13) output_for_t0
380	CASE ( 'overshoot_limit_e' )
381	READ ( 13 ) overshoot_limit_e
382	CASE ( 'overshoot_limit_pt' )
383	READ ( 13 ) overshoot_limit_pt
384	CASE ( 'overshoot_limit_u' )
385	READ ( 13 ) overshoot_limit_u
386	CASE ( 'overshoot_limit_v' )
387	READ ( 13 ) overshoot_limit_v
388	CASE ( 'overshoot_limit_w' )
389	READ ( 13 ) overshoot_limit_w
390	CASE ( 'passive_scalar' )
391	READ ( 13 ) passive_scalar
392	CASE ( 'pch_index' )
393	READ ( 13 ) pch_index
394	CASE ( 'phi' )
395	READ ( 13 ) phi
396	CASE ( 'plant_canopy' )
397	READ ( 13 ) plant_canopy
398	CASE ( 'prandtl_layer' )
399	READ ( 13 ) prandtl_layer
400	CASE ( 'precipitation' )
401	READ ( 13 ) precipitation
402	CASE ( 'pt_init' )
403	READ ( 13 ) pt_init
404	CASE ( 'pt_reference' )
405	READ ( 13 ) pt_reference
406	CASE ( 'pt_surface' )
407	READ ( 13 ) pt_surface
408	CASE ( 'pt_surface_initial_change' )
409	READ ( 13 ) pt_surface_initial_change
410	CASE ( 'pt_vertical_gradient' )
411	READ ( 13 ) pt_vertical_gradient
412	CASE ( 'pt_vertical_gradient_level' )
413	READ ( 13 ) pt_vertical_gradient_level
414	CASE ( 'pt_vertical_gradient_level_ind' )
415	READ ( 13 ) pt_vertical_gradient_level_ind
416	CASE ( 'q_init' )
417	READ ( 13 ) q_init
418	CASE ( 'q_surface' )
419	READ ( 13 ) q_surface
420	CASE ( 'q_surface_initial_change' )
421	READ ( 13 ) q_surface_initial_change
422	CASE ( 'q_vertical_gradient' )
423	READ ( 13 ) q_vertical_gradient
424	CASE ( 'q_vertical_gradient_level' )
425	READ ( 13 ) q_vertical_gradient_level
426	CASE ( 'q_vertical_gradient_level_ind' )
427	READ ( 13 ) q_vertical_gradient_level_ind
428	CASE ( 'radiation' )
429	READ ( 13 ) radiation
430	CASE ( 'random_generator' )
431	READ ( 13 ) random_generator
432	CASE ( 'random_heatflux' )
433	READ ( 13 ) random_heatflux
434	CASE ( 'recycling_width' )
435	READ ( 13 ) recycling_width
436	CASE ( 'rif_max' )
437	READ ( 13 ) rif_max
438	CASE ( 'rif_min' )
439	READ ( 13 ) rif_min
440	CASE ( 'roughness_length' )
441	READ ( 13 ) roughness_length
442	CASE ( 'runnr' )
443	READ ( 13 ) runnr
444	CASE ( 'run_coupled' )
445	READ ( 13 ) run_coupled
446	CASE ( 'sa_init' )
447	READ ( 13 ) sa_init
448	CASE ( 'sa_surface' )
449	READ ( 13 ) sa_surface
450	CASE ( 'sa_vertical_gradient' )
451	READ ( 13 ) sa_vertical_gradient
452	CASE ( 'sa_vertical_gradient_level' )
453	READ ( 13 ) sa_vertical_gradient_level
454	CASE ( 'scalar_advec' )
455	READ ( 13 ) scalar_advec
456	CASE ( 'scalar_exchange_coefficient' )
457	READ ( 13 ) scalar_exchange_coefficient
458	CASE ( 'simulated_time' )
459	READ ( 13 ) simulated_time
460	CASE ( 'surface_heatflux' )
461	READ ( 13 ) surface_heatflux
462	CASE ( 'surface_pressure' )
463	READ ( 13 ) surface_pressure
464	CASE ( 'surface_scalarflux' )
465	READ ( 13 ) surface_scalarflux
466	CASE ( 'surface_waterflux' )
467	READ ( 13 ) surface_waterflux
468	CASE ( 's_surface' )
469	READ ( 13 ) s_surface
470	CASE ( 's_surface_initial_change' )
471	READ ( 13 ) s_surface_initial_change
472	CASE ( 's_vertical_gradient' )
473	READ ( 13 ) s_vertical_gradient
474	CASE ( 's_vertical_gradient_level' )
475	READ ( 13 ) s_vertical_gradient_level
476	CASE ( 'time_coupling' )
477	READ ( 13 ) time_coupling
478	CASE ( 'time_disturb' )
479	READ ( 13 ) time_disturb
480	CASE ( 'time_dopr' )
481	READ ( 13 ) time_dopr
482	CASE ( 'time_dopr_av' )
483	READ ( 13 ) time_dopr_av
484	CASE ( 'time_dopr_listing' )
485	READ ( 13 ) time_dopr_listing
486	CASE ( 'time_dopts' )
487	READ ( 13 ) time_dopts
488	CASE ( 'time_dosp' )
489	READ ( 13 ) time_dosp
490	CASE ( 'time_dots' )
491	READ ( 13 ) time_dots
492	CASE ( 'time_do2d_xy' )
493	READ ( 13 ) time_do2d_xy
494	CASE ( 'time_do2d_xz' )
495	READ ( 13 ) time_do2d_xz
496	CASE ( 'time_do2d_yz' )
497	READ ( 13 ) time_do2d_yz
498	CASE ( 'time_do3d' )
499	READ ( 13 ) time_do3d
500	CASE ( 'time_do_av' )
501	READ ( 13 ) time_do_av
502	CASE ( 'time_do_sla' )
503	READ ( 13 ) time_do_sla
504	CASE ( 'time_dvrp' )
505	READ ( 13 ) time_dvrp
506	CASE ( 'time_restart' )
507	READ ( 13 ) time_restart
508	CASE ( 'time_run_control' )
509	READ ( 13 ) time_run_control
510	CASE ( 'time_since_reference_point' )
511	READ ( 13 ) time_since_reference_point
512	CASE ( 'time_sort_particles' )
513	READ ( 13 ) time_sort_particles
514	CASE ( 'timestep_scheme' )
515	READ ( 13 ) timestep_scheme
516	CASE ( 'topography' )
517	READ ( 13 ) topography
518	CASE ( 'topography_grid_convention' )
519	READ ( 13 ) topography_grid_convention
520	CASE ( 'top_heatflux' )
521	READ ( 13 ) top_heatflux
522	CASE ( 'top_momentumflux_u' )
523	READ ( 13 ) top_momentumflux_u
524	CASE ( 'top_momentumflux_v' )
525	READ ( 13 ) top_momentumflux_v
526	CASE ( 'top_salinityflux' )
527	READ ( 13 ) top_salinityflux
528	CASE ( 'tsc' )
529	READ ( 13 ) tsc
530	CASE ( 'turbulent_inflow' )
531	READ ( 13 ) turbulent_inflow
532	CASE ( 'u_bulk' )
533	READ ( 13 ) u_bulk
534	CASE ( 'u_init' )
535	READ ( 13 ) u_init
536	CASE ( 'u_max' )
537	READ ( 13 ) u_max
538	CASE ( 'u_max_ijk' )
539	READ ( 13 ) u_max_ijk
540	CASE ( 'ug' )
541	READ ( 13 ) ug
542	CASE ( 'ug_surface' )
543	READ ( 13 ) ug_surface
544	CASE ( 'ug_vertical_gradient' )
545	READ ( 13 ) ug_vertical_gradient
546	CASE ( 'ug_vertical_gradient_level' )
547	READ ( 13 ) ug_vertical_gradient_level
548	CASE ( 'ug_vertical_gradient_level_ind' )
549	READ ( 13 ) ug_vertical_gradient_level_ind
550	CASE ( 'ups_limit_e' )
551	READ ( 13 ) ups_limit_e
552	CASE ( 'ups_limit_pt' )
553	READ ( 13 ) ups_limit_pt
554	CASE ( 'ups_limit_u' )
555	READ ( 13 ) ups_limit_u
556	CASE ( 'ups_limit_v' )
557	READ ( 13 ) ups_limit_v
558	CASE ( 'ups_limit_w' )
559	READ ( 13 ) ups_limit_w
560	CASE ( 'use_surface_fluxes' )
561	READ ( 13 ) use_surface_fluxes
562	CASE ( 'use_top_fluxes' )
563	READ ( 13 ) use_top_fluxes
564	CASE ( 'use_ug_for_galilei_tr' )
565	READ ( 13 ) use_ug_for_galilei_tr
566	CASE ( 'use_upstream_for_tke' )
567	READ ( 13 ) use_upstream_for_tke
568	CASE ( 'v_bulk' )
569	READ ( 13 ) v_bulk
570	CASE ( 'v_init' )
571	READ ( 13 ) v_init
572	CASE ( 'v_max' )
573	READ ( 13 ) v_max
574	CASE ( 'v_max_ijk' )
575	READ ( 13 ) v_max_ijk
576	CASE ( 'vg' )
577	READ ( 13 ) vg
578	CASE ( 'vg_surface' )
579	READ ( 13 ) vg_surface
580	CASE ( 'vg_vertical_gradient' )
581	READ ( 13 ) vg_vertical_gradient
582	CASE ( 'vg_vertical_gradient_level' )
583	READ ( 13 ) vg_vertical_gradient_level
584	CASE ( 'vg_vertical_gradient_level_ind' )
585	READ ( 13 ) vg_vertical_gradient_level_ind
586	CASE ( 'volume_flow_area' )
587	READ ( 13 ) volume_flow_area
588	CASE ( 'volume_flow_initial' )
589	READ ( 13 ) volume_flow_initial
590	CASE ( 'wall_adjustment' )
591	READ ( 13 ) wall_adjustment
592	CASE ( 'w_max' )
593	READ ( 13 ) w_max
594	CASE ( 'w_max_ijk' )
595	READ ( 13 ) w_max_ijk
596
597	CASE DEFAULT
598	WRITE( message_string, * ) 'unknown variable named "', &
599	TRIM( variable_chr ), '" found in', &
600	' data from prior run on PE ', myid
601	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
602	END SELECT
603	!
604	!-- Read next string
605	READ ( 13 ) variable_chr
606
607	ENDDO
608
609
610	END SUBROUTINE read_var_list
611
612
613
614	SUBROUTINE read_parts_of_var_list
615
616	!------------------------------------------------------------------------------!
617	! Description:
618	! ------------
619	! Skipping the global control variables from restart-file (binary format)
620	! except some informations needed when reading restart data from a previous
621	! run which used a smaller total domain or/and a different domain decomposition.
622	!------------------------------------------------------------------------------!
623
624	USE arrays_3d
625	USE control_parameters
626	USE indices
627	USE pegrid
628	USE statistics
629
630	IMPLICIT NONE
631
632	CHARACTER (LEN=10) :: version_on_file
633	CHARACTER (LEN=30) :: variable_chr
634
635	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
636	statistic_regions_on_file, tmp_mpru, tmp_sr
637
638	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
639	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
640
641
642	CALL check_open( 13 )
643
644	WRITE (9,*) 'rpovl: after check open 13'
645	CALL local_flush( 9 )
646	READ ( 13 ) version_on_file
647
648	!
649	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
650	!-- run
651	READ ( 13 ) variable_chr
652	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
653	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
654	'run on PE ', myid
655	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
656	ENDIF
657	READ ( 13 ) numprocs_previous_run
658
659	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
660	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
661	ENDIF
662
663	READ ( 13 ) variable_chr
664	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
665	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
666	'prior run on PE ', myid
667	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
668	ENDIF
669	READ ( 13 ) hor_index_bounds_previous_run
670
671	!
672	!-- Read vertical number of gridpoints and number of different areas used
673	!-- for computing statistics. Allocate arrays depending on these values,
674	!-- which are needed for the following read instructions.
675	READ ( 13 ) variable_chr
676	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
677	message_string = 'nz not found in restart data file'
678	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
679	ENDIF
680	READ ( 13 ) nz_on_file
681	IF ( nz_on_file /= nz ) THEN
682	WRITE( message_string, * ) 'mismatch concerning number of ', &
683	'gridpoints along z', &
684	'&nz on file = "', nz_on_file, '"', &
685	'&nz from run = "', nz, '"'
686	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
687	ENDIF
688
689	READ ( 13 ) variable_chr
690	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
691	message_string = 'max_pr_user not found in restart data file'
692	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
693	ENDIF
694	READ ( 13 ) max_pr_user_on_file
695	IF ( max_pr_user_on_file /= max_pr_user ) THEN
696	WRITE( message_string, * ) 'number of user profiles on res', &
697	'tart data file differs from the current ', &
698	'run&max_pr_user on file = "', &
699	max_pr_user_on_file, '"', &
700	'&max_pr_user from run = "', &
701	max_pr_user, '"'
702	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
703	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
704	ELSE
705	tmp_mpru = max_pr_user
706	ENDIF
707
708	READ ( 13 ) variable_chr
709	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
710	message_string = 'statistic_regions not found in restart data file'
711	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
712	ENDIF
713	READ ( 13 ) statistic_regions_on_file
714	IF ( statistic_regions_on_file /= statistic_regions ) THEN
715	WRITE( message_string, * ) 'statistic regions on restart data file ',&
716	'differ from the current run', &
717	'&statistic regions on file = "', &
718	statistic_regions_on_file, '"', &
719	'&statistic regions from run = "', &
720	statistic_regions, '"', &
721	'&statistic data may be lost!'
722	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
723	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
724	ELSE
725	tmp_sr = statistic_regions
726	ENDIF
727
728
729	!
730	!-- Now read and check some control parameters and skip the rest
731	WRITE (9,*) 'wpovl: begin reading variables'
732	CALL local_flush( 9 )
733	READ ( 13 ) variable_chr
734
735	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
736
737	SELECT CASE ( TRIM( variable_chr ) )
738
739	CASE ( 'average_count_pr' )
740	READ ( 13 ) average_count_pr
741	IF ( average_count_pr /= 0 ) THEN
742	WRITE( message_string, * ) 'inflow profiles not temporally ', &
743	'averaged. &Averaging will be done now using ', &
744	average_count_pr, ' samples.'
745	CALL message( 'read_parts_of_var_list', 'PA0309', &
746	0, 1, 0, 6, 0 )
747	ENDIF
748
749	CASE ( 'hom' )
750	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
751	0:statistic_regions_on_file) )
752	READ ( 13 ) hom_on_file
753	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
754	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
755	DEALLOCATE( hom_on_file )
756
757	CASE ( 'hom_sum' )
758	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
759	0:statistic_regions_on_file) )
760	READ ( 13 ) hom_sum_on_file
761	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
762	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
763	DEALLOCATE( hom_sum_on_file )
764
765	CASE ( 'nx' )
766	READ ( 13 ) nx_on_file
767
768	CASE ( 'ny' )
769	READ ( 13 ) ny_on_file
770
771
772	CASE DEFAULT
773
774	READ ( 13 ) idum
775
776	END SELECT
777
778	READ ( 13 ) variable_chr
779
780	ENDDO
781
782	!
783	!-- Calculate the temporal average of vertical profiles, if neccessary
784	IF ( average_count_pr /= 0 ) THEN
785	hom_sum = hom_sum / REAL( average_count_pr )
786	ENDIF
787
788
789	END SUBROUTINE read_parts_of_var_list
790
791
792
793	SUBROUTINE skip_var_list
794
795	!------------------------------------------------------------------------------!
796	! Description:
797	! ------------
798	! Skipping the global control variables from restart-file (binary format)
799	!------------------------------------------------------------------------------!
800
801	IMPLICIT NONE
802
803	CHARACTER (LEN=10) :: version_on_file
804	CHARACTER (LEN=30) :: variable_chr
805
806	INTEGER :: idum
807
808
809	WRITE (9,*) 'skipvl #1'
810	CALL local_flush( 9 )
811	READ ( 13 ) version_on_file
812
813	WRITE (9,*) 'skipvl before variable_chr'
814	CALL local_flush( 9 )
815	READ ( 13 ) variable_chr
816	WRITE (9,*) 'skipvl after variable_chr'
817	CALL local_flush( 9 )
818
819	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
820
821	WRITE (9,*) 'skipvl chr = ', variable_chr
822	CALL local_flush( 9 )
823	READ ( 13 ) idum
824	READ ( 13 ) variable_chr
825
826	ENDDO
827	WRITE (9,*) 'skipvl last'
828	CALL local_flush( 9 )
829
830
831	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |