| 1 | !> @file read_var_list.f90 |
|---|
| 2 | !------------------------------------------------------------------------------! |
|---|
| 3 | ! This file is part of PALM. |
|---|
| 4 | ! |
|---|
| 5 | ! PALM is free software: you can redistribute it and/or modify it under the |
|---|
| 6 | ! terms of the GNU General Public License as published by the Free Software |
|---|
| 7 | ! Foundation, either version 3 of the License, or (at your option) any later |
|---|
| 8 | ! version. |
|---|
| 9 | ! |
|---|
| 10 | ! PALM is distributed in the hope that it will be useful, but WITHOUT ANY |
|---|
| 11 | ! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
|---|
| 12 | ! A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
|---|
| 13 | ! |
|---|
| 14 | ! You should have received a copy of the GNU General Public License along with |
|---|
| 15 | ! PALM. If not, see <http://www.gnu.org/licenses/>. |
|---|
| 16 | ! |
|---|
| 17 | ! Copyright 1997-2017 Leibniz Universitaet Hannover |
|---|
| 18 | !------------------------------------------------------------------------------! |
|---|
| 19 | ! |
|---|
| 20 | ! Current revisions: |
|---|
| 21 | ! ------------------ |
|---|
| 22 | ! |
|---|
| 23 | ! |
|---|
| 24 | ! Former revisions: |
|---|
| 25 | ! ----------------- |
|---|
| 26 | ! $Id: read_var_list.f90 2265 2017-06-08 16:58:28Z raasch $ |
|---|
| 27 | ! Unused variables removed. |
|---|
| 28 | ! |
|---|
| 29 | ! 2259 2017-06-08 09:09:11Z gronemeier |
|---|
| 30 | ! Implemented synthetic turbulence generator |
|---|
| 31 | ! |
|---|
| 32 | ! 2233 2017-05-30 18:08:54Z suehring |
|---|
| 33 | ! |
|---|
| 34 | ! 2232 2017-05-30 17:47:52Z suehring |
|---|
| 35 | ! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add |
|---|
| 36 | ! wall_salinityflux |
|---|
| 37 | ! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y, |
|---|
| 38 | ! tunnel_wall_depth |
|---|
| 39 | ! |
|---|
| 40 | ! 2042 2016-11-02 13:47:31Z suehring |
|---|
| 41 | ! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux |
|---|
| 42 | ! |
|---|
| 43 | ! 2000 2016-08-20 18:09:15Z knoop |
|---|
| 44 | ! Forced header and separation lines into 80 columns |
|---|
| 45 | ! |
|---|
| 46 | ! 1992 2016-08-12 15:14:59Z suehring |
|---|
| 47 | ! top_scalarflux added |
|---|
| 48 | ! |
|---|
| 49 | ! 1960 2016-07-12 16:34:24Z suehring |
|---|
| 50 | ! Separate humidity and passive scalar |
|---|
| 51 | ! Remove unused variables from ONLY list |
|---|
| 52 | ! |
|---|
| 53 | ! 1957 2016-07-07 10:43:48Z suehring |
|---|
| 54 | ! flight module added |
|---|
| 55 | ! |
|---|
| 56 | ! 1849 2016-04-08 11:33:18Z hoffmann |
|---|
| 57 | ! Adapted for modularization of microphysics |
|---|
| 58 | ! |
|---|
| 59 | ! 1833 2016-04-07 14:23:03Z raasch |
|---|
| 60 | ! spectra_mod added |
|---|
| 61 | ! |
|---|
| 62 | ! 1831 2016-04-07 13:15:51Z hoffmann |
|---|
| 63 | ! turbulence renamed collision_turbulence, drizzle renamed |
|---|
| 64 | ! cloud_water_sedimentation |
|---|
| 65 | ! |
|---|
| 66 | ! 1808 2016-04-05 19:44:00Z raasch |
|---|
| 67 | ! test output removed |
|---|
| 68 | ! |
|---|
| 69 | ! 1783 2016-03-06 18:36:17Z raasch |
|---|
| 70 | ! netcdf module name changed + related changes |
|---|
| 71 | ! |
|---|
| 72 | ! 1699 2015-10-29 08:02:35Z maronga |
|---|
| 73 | ! Bugfix: update of binary version from 3.9b to 4.0 was missing |
|---|
| 74 | ! |
|---|
| 75 | ! 1691 2015-10-26 16:17:44Z maronga |
|---|
| 76 | ! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed |
|---|
| 77 | ! output of prandtl_layer and rif_min, rif_max. |
|---|
| 78 | ! |
|---|
| 79 | ! 1682 2015-10-07 23:56:08Z knoop |
|---|
| 80 | ! Code annotations made doxygen readable |
|---|
| 81 | ! |
|---|
| 82 | ! 1615 2015-07-08 18:49:19Z suehring |
|---|
| 83 | ! Enable turbulent inflow for passive_scalar and humidity |
|---|
| 84 | ! |
|---|
| 85 | ! 1585 2015-04-30 07:05:52Z maronga |
|---|
| 86 | ! Adapted for RRTMG |
|---|
| 87 | ! |
|---|
| 88 | ! 1560 2015-03-06 10:48:54Z keck |
|---|
| 89 | ! +recycling_yshift |
|---|
| 90 | ! |
|---|
| 91 | ! 1522 2015-01-14 10:53:12Z keck |
|---|
| 92 | ! added query for checking if the advection scheme in the restart run is the |
|---|
| 93 | ! same as the advection scheme in the corresponding initial run |
|---|
| 94 | ! |
|---|
| 95 | ! 1502 2014-12-03 18:22:31Z kanani |
|---|
| 96 | ! Canopy module and parameters removed (parameters are always read from |
|---|
| 97 | ! canopy_par NAMELIST for initial and restart runs) |
|---|
| 98 | ! |
|---|
| 99 | ! 1496 2014-12-02 17:25:50Z maronga |
|---|
| 100 | ! Renamed "radiation" -> "cloud_top_radiation" |
|---|
| 101 | ! |
|---|
| 102 | ! 1484 2014-10-21 10:53:05Z kanani |
|---|
| 103 | ! Changes in the course of the canopy-model modularization: |
|---|
| 104 | ! parameters alpha_lad, beta_lad, lai_beta added, |
|---|
| 105 | ! module plant_canopy_model_mod added, |
|---|
| 106 | ! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient |
|---|
| 107 | ! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff |
|---|
| 108 | ! |
|---|
| 109 | ! 1322 2014-03-20 16:38:49Z raasch |
|---|
| 110 | ! REAL functions provided with KIND-attribute |
|---|
| 111 | ! |
|---|
| 112 | ! 1320 2014-03-20 08:40:49Z raasch |
|---|
| 113 | ! ONLY-attribute added to USE-statements, |
|---|
| 114 | ! kind-parameters added to all INTEGER and REAL declaration statements, |
|---|
| 115 | ! kinds are defined in new module kinds, |
|---|
| 116 | ! old module precision_kind is removed, |
|---|
| 117 | ! revision history before 2012 removed, |
|---|
| 118 | ! comment fields (!:) to be used for variable explanations added to |
|---|
| 119 | ! all variable declaration statements |
|---|
| 120 | ! |
|---|
| 121 | ! 1308 2014-03-13 14:58:42Z fricke |
|---|
| 122 | ! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count, |
|---|
| 123 | ! +do3d_time_count |
|---|
| 124 | ! |
|---|
| 125 | ! 1253 2013-11-07 10:48:12Z fricke |
|---|
| 126 | ! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state |
|---|
| 127 | ! is zero for initializing_actions = 'cyclic_fill' |
|---|
| 128 | ! |
|---|
| 129 | ! 1241 2013-10-30 11:36:58Z heinze |
|---|
| 130 | ! +nudging |
|---|
| 131 | ! +large_scale_forcing |
|---|
| 132 | ! |
|---|
| 133 | ! 1195 2013-07-01 12:27:57Z heinze |
|---|
| 134 | ! Bugfix: allocate ref_state |
|---|
| 135 | ! |
|---|
| 136 | ! 1179 2013-06-14 05:57:58Z raasch |
|---|
| 137 | ! +ref_state |
|---|
| 138 | ! |
|---|
| 139 | ! 1115 2013-03-26 18:16:16Z hoffmann |
|---|
| 140 | ! unused variables removed |
|---|
| 141 | ! |
|---|
| 142 | ! 1092 2013-02-02 11:24:22Z raasch |
|---|
| 143 | ! unused variables removed |
|---|
| 144 | ! |
|---|
| 145 | ! 1065 2012-11-22 17:42:36Z hoffmann |
|---|
| 146 | ! +nc, c_sedimentation, limiter_sedimentation, turbulence |
|---|
| 147 | ! -mu_constant, mu_constant_value |
|---|
| 148 | ! |
|---|
| 149 | ! 1053 2012-11-13 17:11:03Z hoffmann |
|---|
| 150 | ! necessary expansions according to the two new prognostic equations (nr, qr) |
|---|
| 151 | ! of the two-moment cloud physics scheme: |
|---|
| 152 | ! +bc_*_b, +bc_*_t, +bc_*_t_val, *_init, *_surface, *_surface_initial_change, |
|---|
| 153 | ! +*_vertical_gradient, +*_vertical_gradient_level, *_vertical_gradient_level_ind, |
|---|
| 154 | ! +surface_waterflux_* |
|---|
| 155 | ! |
|---|
| 156 | ! in addition, steering parameters parameters of the two-moment cloud physics |
|---|
| 157 | ! scheme: |
|---|
| 158 | ! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect |
|---|
| 159 | ! |
|---|
| 160 | ! 1036 2012-10-22 13:43:42Z raasch |
|---|
| 161 | ! code put under GPL (PALM 3.9) |
|---|
| 162 | ! |
|---|
| 163 | ! 1015 2012-09-27 09:23:24Z raasch |
|---|
| 164 | ! -adjust_mixing_length |
|---|
| 165 | ! |
|---|
| 166 | ! 1003 2012-09-14 14:35:53Z raasch |
|---|
| 167 | ! -grid_matching |
|---|
| 168 | ! |
|---|
| 169 | ! 1001 2012-09-13 14:08:46Z raasch |
|---|
| 170 | ! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor, |
|---|
| 171 | ! overshoot_limit_*, ups_limit_* |
|---|
| 172 | ! |
|---|
| 173 | ! 978 2012-08-09 08:28:32Z fricke |
|---|
| 174 | ! -km_damp_max, outflow_damping_width |
|---|
| 175 | ! +pt_damping_factor, pt_damping_width |
|---|
| 176 | ! +z0h_factor |
|---|
| 177 | ! |
|---|
| 178 | ! 940 2012-07-09 14:31:00Z raasch |
|---|
| 179 | ! +neutral |
|---|
| 180 | ! |
|---|
| 181 | ! 927 2012-06-06 19:15:04Z raasch |
|---|
| 182 | ! +masking_method |
|---|
| 183 | ! |
|---|
| 184 | ! 849 2012-03-15 10:35:09Z raasch |
|---|
| 185 | ! first_call_advec_particles renamed first_call_lpm |
|---|
| 186 | ! |
|---|
| 187 | ! 824 2012-02-17 09:09:57Z raasch |
|---|
| 188 | ! +curvature_solution_effects |
|---|
| 189 | ! |
|---|
| 190 | ! Revision 1.1 1998/03/18 20:18:48 raasch |
|---|
| 191 | ! Initial revision |
|---|
| 192 | ! |
|---|
| 193 | ! |
|---|
| 194 | ! Description: |
|---|
| 195 | ! ------------ |
|---|
| 196 | !> Reading values of global control variables from restart-file (binary format) |
|---|
| 197 | !------------------------------------------------------------------------------! |
|---|
| 198 | SUBROUTINE read_var_list |
|---|
| 199 | |
|---|
| 200 | |
|---|
| 201 | USE arrays_3d, & |
|---|
| 202 | ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, & |
|---|
| 203 | q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg |
|---|
| 204 | |
|---|
| 205 | USE control_parameters |
|---|
| 206 | |
|---|
| 207 | USE flight_mod, & |
|---|
| 208 | ONLY: flight_read_restart_data |
|---|
| 209 | |
|---|
| 210 | USE grid_variables, & |
|---|
| 211 | ONLY: dx, dy |
|---|
| 212 | |
|---|
| 213 | USE indices, & |
|---|
| 214 | ONLY: nz, nx, nx_on_file, ny, ny_on_file |
|---|
| 215 | |
|---|
| 216 | USE microphysics_mod, & |
|---|
| 217 | ONLY: c_sedimentation, collision_turbulence, & |
|---|
| 218 | cloud_water_sedimentation, limiter_sedimentation, & |
|---|
| 219 | nc_const, ventilation_effect |
|---|
| 220 | |
|---|
| 221 | USE model_1d, & |
|---|
| 222 | ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d |
|---|
| 223 | |
|---|
| 224 | USE netcdf_interface, & |
|---|
| 225 | ONLY: netcdf_precision, output_for_t0 |
|---|
| 226 | |
|---|
| 227 | USE particle_attributes, & |
|---|
| 228 | ONLY: curvature_solution_effects |
|---|
| 229 | |
|---|
| 230 | USE pegrid |
|---|
| 231 | |
|---|
| 232 | USE radiation_model_mod, & |
|---|
| 233 | ONLY: time_radiation |
|---|
| 234 | |
|---|
| 235 | USE spectra_mod, & |
|---|
| 236 | ONLY: average_count_sp |
|---|
| 237 | |
|---|
| 238 | USE statistics, & |
|---|
| 239 | ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, & |
|---|
| 240 | v_max, v_max_ijk, w_max, w_max_ijk |
|---|
| 241 | |
|---|
| 242 | USE synthetic_turbulence_generator_mod, & |
|---|
| 243 | ONLY: stg_read_restart_data |
|---|
| 244 | |
|---|
| 245 | IMPLICIT NONE |
|---|
| 246 | |
|---|
| 247 | CHARACTER (LEN=10) :: binary_version, version_on_file |
|---|
| 248 | CHARACTER (LEN=30) :: variable_chr |
|---|
| 249 | |
|---|
| 250 | |
|---|
| 251 | CALL check_open( 13 ) |
|---|
| 252 | |
|---|
| 253 | ! |
|---|
| 254 | !-- Make version number check first |
|---|
| 255 | READ ( 13 ) version_on_file |
|---|
| 256 | binary_version = '4.1' |
|---|
| 257 | IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN |
|---|
| 258 | WRITE( message_string, * ) 'version mismatch concerning control ', & |
|---|
| 259 | 'variables', & |
|---|
| 260 | '&version on file = "', & |
|---|
| 261 | TRIM( version_on_file ), '"', & |
|---|
| 262 | '&version on program = "', & |
|---|
| 263 | TRIM( binary_version ), '"' |
|---|
| 264 | CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 ) |
|---|
| 265 | ENDIF |
|---|
| 266 | |
|---|
| 267 | ! |
|---|
| 268 | !-- Read number of PEs and horizontal index bounds of all PEs used in previous |
|---|
| 269 | !-- run |
|---|
| 270 | READ ( 13 ) variable_chr |
|---|
| 271 | IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN |
|---|
| 272 | WRITE( message_string, * ) 'numprocs not found in data from prior ', & |
|---|
| 273 | 'run on PE ', myid |
|---|
| 274 | CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 ) |
|---|
| 275 | ENDIF |
|---|
| 276 | READ ( 13 ) numprocs_previous_run |
|---|
| 277 | |
|---|
| 278 | IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN |
|---|
| 279 | ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) ) |
|---|
| 280 | ENDIF |
|---|
| 281 | |
|---|
| 282 | READ ( 13 ) variable_chr |
|---|
| 283 | IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN |
|---|
| 284 | WRITE( message_string, * ) 'hor_index_bounds not found in data from ', & |
|---|
| 285 | 'prior run on PE ', myid |
|---|
| 286 | CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 ) |
|---|
| 287 | ENDIF |
|---|
| 288 | READ ( 13 ) hor_index_bounds_previous_run |
|---|
| 289 | |
|---|
| 290 | ! |
|---|
| 291 | !-- Read vertical number of gridpoints and number of different areas used |
|---|
| 292 | !-- for computing statistics. Allocate arrays depending on these values, |
|---|
| 293 | !-- which are needed for the following read instructions. |
|---|
| 294 | READ ( 13 ) variable_chr |
|---|
| 295 | IF ( TRIM( variable_chr ) /= 'nz' ) THEN |
|---|
| 296 | WRITE( message_string, * ) 'nz not found in data from prior run on PE ',& |
|---|
| 297 | myid |
|---|
| 298 | CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 ) |
|---|
| 299 | ENDIF |
|---|
| 300 | READ ( 13 ) nz |
|---|
| 301 | |
|---|
| 302 | READ ( 13 ) variable_chr |
|---|
| 303 | IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN |
|---|
| 304 | WRITE( message_string, * ) 'max_pr_user not found in data from ', & |
|---|
| 305 | 'prior run on PE ', myid |
|---|
| 306 | CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 ) |
|---|
| 307 | ENDIF |
|---|
| 308 | READ ( 13 ) max_pr_user ! This value is checked against the number of |
|---|
| 309 | ! user profiles given for the current run |
|---|
| 310 | ! in routine user_parin (it has to match) |
|---|
| 311 | |
|---|
| 312 | READ ( 13 ) variable_chr |
|---|
| 313 | IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN |
|---|
| 314 | WRITE( message_string, * ) 'statistic_regions not found in data from ', & |
|---|
| 315 | 'prior run on PE ', myid |
|---|
| 316 | CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 ) |
|---|
| 317 | ENDIF |
|---|
| 318 | READ ( 13 ) statistic_regions |
|---|
| 319 | IF ( .NOT. ALLOCATED( ug ) ) THEN |
|---|
| 320 | ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), & |
|---|
| 321 | v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), & |
|---|
| 322 | ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), & |
|---|
| 323 | hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), & |
|---|
| 324 | hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) ) |
|---|
| 325 | ENDIF |
|---|
| 326 | |
|---|
| 327 | ! |
|---|
| 328 | !-- Now read all control parameters: |
|---|
| 329 | !-- Caution: When the following read instructions have been changed, the |
|---|
| 330 | !-- ------- version number stored in the variable binary_version has to be |
|---|
| 331 | !-- increased. The same changes must also be done in write_var_list. |
|---|
| 332 | READ ( 13 ) variable_chr |
|---|
| 333 | DO WHILE ( TRIM( variable_chr ) /= '*** end ***' ) |
|---|
| 334 | |
|---|
| 335 | SELECT CASE ( TRIM( variable_chr ) ) |
|---|
| 336 | |
|---|
| 337 | CASE ( 'advected_distance_x' ) |
|---|
| 338 | READ ( 13 ) advected_distance_x |
|---|
| 339 | CASE ( 'advected_distance_y' ) |
|---|
| 340 | READ ( 13 ) advected_distance_y |
|---|
| 341 | CASE ( 'alpha_surface' ) |
|---|
| 342 | READ ( 13 ) alpha_surface |
|---|
| 343 | CASE ( 'average_count_pr' ) |
|---|
| 344 | READ ( 13 ) average_count_pr |
|---|
| 345 | CASE ( 'average_count_sp' ) |
|---|
| 346 | READ ( 13 ) average_count_sp |
|---|
| 347 | CASE ( 'average_count_3d' ) |
|---|
| 348 | READ ( 13 ) average_count_3d |
|---|
| 349 | CASE ( 'bc_e_b' ) |
|---|
| 350 | READ ( 13 ) bc_e_b |
|---|
| 351 | CASE ( 'bc_lr' ) |
|---|
| 352 | READ ( 13 ) bc_lr |
|---|
| 353 | CASE ( 'bc_ns' ) |
|---|
| 354 | READ ( 13 ) bc_ns |
|---|
| 355 | CASE ( 'bc_p_b' ) |
|---|
| 356 | READ ( 13 ) bc_p_b |
|---|
| 357 | CASE ( 'bc_p_t' ) |
|---|
| 358 | READ ( 13 ) bc_p_t |
|---|
| 359 | CASE ( 'bc_pt_b' ) |
|---|
| 360 | READ ( 13 ) bc_pt_b |
|---|
| 361 | CASE ( 'bc_pt_t' ) |
|---|
| 362 | READ ( 13 ) bc_pt_t |
|---|
| 363 | CASE ( 'bc_pt_t_val' ) |
|---|
| 364 | READ ( 13 ) bc_pt_t_val |
|---|
| 365 | CASE ( 'bc_q_b' ) |
|---|
| 366 | READ ( 13 ) bc_q_b |
|---|
| 367 | CASE ( 'bc_q_t' ) |
|---|
| 368 | READ ( 13 ) bc_q_t |
|---|
| 369 | CASE ( 'bc_q_t_val' ) |
|---|
| 370 | READ ( 13 ) bc_q_t_val |
|---|
| 371 | CASE ( 'bc_s_b' ) |
|---|
| 372 | READ ( 13 ) bc_s_b |
|---|
| 373 | CASE ( 'bc_s_t' ) |
|---|
| 374 | READ ( 13 ) bc_s_t |
|---|
| 375 | CASE ( 'bc_sa_t' ) |
|---|
| 376 | READ ( 13 ) bc_sa_t |
|---|
| 377 | CASE ( 'bc_uv_b' ) |
|---|
| 378 | READ ( 13 ) bc_uv_b |
|---|
| 379 | CASE ( 'bc_uv_t' ) |
|---|
| 380 | READ ( 13 ) bc_uv_t |
|---|
| 381 | CASE ( 'bottom_salinityflux' ) |
|---|
| 382 | READ ( 13 ) bottom_salinityflux |
|---|
| 383 | CASE ( 'building_height' ) |
|---|
| 384 | READ ( 13 ) building_height |
|---|
| 385 | CASE ( 'building_length_x' ) |
|---|
| 386 | READ ( 13 ) building_length_x |
|---|
| 387 | CASE ( 'building_length_y' ) |
|---|
| 388 | READ ( 13 ) building_length_y |
|---|
| 389 | CASE ( 'building_wall_left' ) |
|---|
| 390 | READ ( 13 ) building_wall_left |
|---|
| 391 | CASE ( 'building_wall_south' ) |
|---|
| 392 | READ ( 13 ) building_wall_south |
|---|
| 393 | CASE ( 'call_psolver_at_all_substeps' ) |
|---|
| 394 | READ ( 13 ) call_psolver_at_all_substeps |
|---|
| 395 | CASE ( 'canyon_height' ) |
|---|
| 396 | READ ( 13 ) canyon_height |
|---|
| 397 | CASE ( 'canyon_width_x' ) |
|---|
| 398 | READ ( 13 ) canyon_width_x |
|---|
| 399 | CASE ( 'canyon_width_y' ) |
|---|
| 400 | READ ( 13 ) canyon_width_y |
|---|
| 401 | CASE ( 'canyon_wall_left' ) |
|---|
| 402 | READ ( 13 ) canyon_wall_left |
|---|
| 403 | CASE ( 'canyon_wall_south' ) |
|---|
| 404 | READ ( 13 ) canyon_wall_south |
|---|
| 405 | CASE ( 'c_sedimentation' ) |
|---|
| 406 | READ ( 13 ) c_sedimentation |
|---|
| 407 | CASE ( 'cfl_factor' ) |
|---|
| 408 | READ ( 13 ) cfl_factor |
|---|
| 409 | CASE ( 'cloud_droplets' ) |
|---|
| 410 | READ ( 13 ) cloud_droplets |
|---|
| 411 | CASE ( 'cloud_physics' ) |
|---|
| 412 | READ ( 13 ) cloud_physics |
|---|
| 413 | CASE ( 'cloud_scheme' ) |
|---|
| 414 | READ ( 13 ) cloud_scheme |
|---|
| 415 | CASE ( 'collective_wait' ) |
|---|
| 416 | READ ( 13 ) collective_wait |
|---|
| 417 | CASE ( 'conserve_volume_flow' ) |
|---|
| 418 | READ ( 13 ) conserve_volume_flow |
|---|
| 419 | CASE ( 'conserve_volume_flow_mode' ) |
|---|
| 420 | READ ( 13 ) conserve_volume_flow_mode |
|---|
| 421 | CASE ( 'constant_flux_layer' ) |
|---|
| 422 | READ ( 13 ) constant_flux_layer |
|---|
| 423 | CASE ( 'coupling_start_time' ) |
|---|
| 424 | READ ( 13 ) coupling_start_time |
|---|
| 425 | CASE ( 'current_timestep_number' ) |
|---|
| 426 | READ ( 13 ) current_timestep_number |
|---|
| 427 | CASE ( 'curvature_solution_effects' ) |
|---|
| 428 | READ ( 13 ) curvature_solution_effects |
|---|
| 429 | CASE ( 'cycle_mg' ) |
|---|
| 430 | READ ( 13 ) cycle_mg |
|---|
| 431 | CASE ( 'damp_level_1d' ) |
|---|
| 432 | READ ( 13 ) damp_level_1d |
|---|
| 433 | CASE ( 'dissipation_1d' ) |
|---|
| 434 | READ ( 13 ) dissipation_1d |
|---|
| 435 | CASE ( 'do2d_xy_time_count' ) |
|---|
| 436 | READ ( 13 ) do2d_xy_time_count |
|---|
| 437 | CASE ( 'do2d_xz_time_count' ) |
|---|
| 438 | READ ( 13 ) do2d_xz_time_count |
|---|
| 439 | CASE ( 'do2d_yz_time_count' ) |
|---|
| 440 | READ ( 13 ) do2d_yz_time_count |
|---|
| 441 | CASE ( 'do3d_time_count' ) |
|---|
| 442 | READ ( 13 ) do3d_time_count |
|---|
| 443 | CASE ( 'dp_external' ) |
|---|
| 444 | READ ( 13 ) dp_external |
|---|
| 445 | CASE ( 'dp_level_b' ) |
|---|
| 446 | READ ( 13 ) dp_level_b |
|---|
| 447 | CASE ( 'dp_smooth' ) |
|---|
| 448 | READ ( 13 ) dp_smooth |
|---|
| 449 | CASE ( 'dpdxy' ) |
|---|
| 450 | READ ( 13 ) dpdxy |
|---|
| 451 | CASE ( 'cloud_water_sedimentation' ) |
|---|
| 452 | READ ( 13 ) cloud_water_sedimentation |
|---|
| 453 | CASE ( 'dt_pr_1d' ) |
|---|
| 454 | READ ( 13 ) dt_pr_1d |
|---|
| 455 | CASE ( 'dt_run_control_1d' ) |
|---|
| 456 | READ ( 13 ) dt_run_control_1d |
|---|
| 457 | CASE ( 'dt_3d' ) |
|---|
| 458 | READ ( 13 ) dt_3d |
|---|
| 459 | CASE ( 'dvrp_filecount' ) |
|---|
| 460 | READ ( 13 ) dvrp_filecount |
|---|
| 461 | CASE ( 'dx' ) |
|---|
| 462 | READ ( 13 ) dx |
|---|
| 463 | CASE ( 'dy' ) |
|---|
| 464 | READ ( 13 ) dy |
|---|
| 465 | CASE ( 'dz' ) |
|---|
| 466 | READ ( 13 ) dz |
|---|
| 467 | CASE ( 'dz_max' ) |
|---|
| 468 | READ ( 13 ) dz_max |
|---|
| 469 | CASE ( 'dz_stretch_factor' ) |
|---|
| 470 | READ ( 13 ) dz_stretch_factor |
|---|
| 471 | CASE ( 'dz_stretch_level' ) |
|---|
| 472 | READ ( 13 ) dz_stretch_level |
|---|
| 473 | CASE ( 'e_min' ) |
|---|
| 474 | READ ( 13 ) e_min |
|---|
| 475 | CASE ( 'end_time_1d' ) |
|---|
| 476 | READ ( 13 ) end_time_1d |
|---|
| 477 | CASE ( 'fft_method' ) |
|---|
| 478 | READ ( 13 ) fft_method |
|---|
| 479 | CASE ( 'first_call_lpm' ) |
|---|
| 480 | READ ( 13 ) first_call_lpm |
|---|
| 481 | CASE ( 'galilei_transformation' ) |
|---|
| 482 | READ ( 13 ) galilei_transformation |
|---|
| 483 | CASE ( 'hom' ) |
|---|
| 484 | READ ( 13 ) hom |
|---|
| 485 | CASE ( 'hom_sum' ) |
|---|
| 486 | READ ( 13 ) hom_sum |
|---|
| 487 | CASE ( 'humidity' ) |
|---|
| 488 | READ ( 13 ) humidity |
|---|
| 489 | CASE ( 'inflow_damping_factor' ) |
|---|
| 490 | IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN |
|---|
| 491 | ALLOCATE( inflow_damping_factor(0:nz+1) ) |
|---|
| 492 | ENDIF |
|---|
| 493 | READ ( 13 ) inflow_damping_factor |
|---|
| 494 | CASE ( 'inflow_damping_height' ) |
|---|
| 495 | READ ( 13 ) inflow_damping_height |
|---|
| 496 | CASE ( 'inflow_damping_width' ) |
|---|
| 497 | READ ( 13 ) inflow_damping_width |
|---|
| 498 | CASE ( 'inflow_disturbance_begin' ) |
|---|
| 499 | READ ( 13 ) inflow_disturbance_begin |
|---|
| 500 | CASE ( 'inflow_disturbance_end' ) |
|---|
| 501 | READ ( 13 ) inflow_disturbance_end |
|---|
| 502 | CASE ( 'km_constant' ) |
|---|
| 503 | READ ( 13 ) km_constant |
|---|
| 504 | CASE ( 'large_scale_forcing' ) |
|---|
| 505 | READ ( 13 ) large_scale_forcing |
|---|
| 506 | CASE ( 'large_scale_subsidence' ) |
|---|
| 507 | READ ( 13 ) large_scale_subsidence |
|---|
| 508 | CASE ( 'limiter_sedimentation' ) |
|---|
| 509 | READ ( 13 ) limiter_sedimentation |
|---|
| 510 | CASE ( 'loop_optimization' ) |
|---|
| 511 | READ ( 13 ) loop_optimization |
|---|
| 512 | CASE ( 'masking_method' ) |
|---|
| 513 | READ ( 13 ) masking_method |
|---|
| 514 | CASE ( 'mean_inflow_profiles' ) |
|---|
| 515 | IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN |
|---|
| 516 | ALLOCATE( mean_inflow_profiles(0:nz+1,7) ) |
|---|
| 517 | ENDIF |
|---|
| 518 | READ ( 13 ) mean_inflow_profiles |
|---|
| 519 | CASE ( 'mg_cycles' ) |
|---|
| 520 | READ ( 13 ) mg_cycles |
|---|
| 521 | CASE ( 'mg_switch_to_pe0_level' ) |
|---|
| 522 | READ ( 13 ) mg_switch_to_pe0_level |
|---|
| 523 | CASE ( 'mixing_length_1d' ) |
|---|
| 524 | READ ( 13 ) mixing_length_1d |
|---|
| 525 | CASE ( 'momentum_advec' ) |
|---|
| 526 | READ ( 13 ) momentum_advec |
|---|
| 527 | CASE ( 'most_method' ) |
|---|
| 528 | READ ( 13 ) most_method |
|---|
| 529 | CASE ( 'nc_const' ) |
|---|
| 530 | READ ( 13 ) nc_const |
|---|
| 531 | CASE ( 'netcdf_precision' ) |
|---|
| 532 | READ ( 13 ) netcdf_precision |
|---|
| 533 | CASE ( 'neutral' ) |
|---|
| 534 | READ ( 13 ) neutral |
|---|
| 535 | CASE ( 'ngsrb' ) |
|---|
| 536 | READ ( 13 ) ngsrb |
|---|
| 537 | CASE ( 'nsor' ) |
|---|
| 538 | READ ( 13 ) nsor |
|---|
| 539 | CASE ( 'nsor_ini' ) |
|---|
| 540 | READ ( 13 ) nsor_ini |
|---|
| 541 | CASE ( 'nudging' ) |
|---|
| 542 | READ ( 13 ) nudging |
|---|
| 543 | CASE ( 'num_leg' ) |
|---|
| 544 | READ ( 13 ) num_leg |
|---|
| 545 | CASE ( 'nx' ) |
|---|
| 546 | READ ( 13 ) nx |
|---|
| 547 | nx_on_file = nx |
|---|
| 548 | CASE ( 'ny' ) |
|---|
| 549 | READ ( 13 ) ny |
|---|
| 550 | ny_on_file = ny |
|---|
| 551 | CASE ( 'ocean' ) |
|---|
| 552 | READ ( 13 ) ocean |
|---|
| 553 | CASE ( 'old_dt' ) |
|---|
| 554 | READ ( 13 ) old_dt |
|---|
| 555 | CASE ( 'omega' ) |
|---|
| 556 | READ ( 13 ) omega |
|---|
| 557 | CASE ( 'omega_sor' ) |
|---|
| 558 | READ ( 13 ) omega_sor |
|---|
| 559 | CASE ( 'output_for_t0' ) |
|---|
| 560 | READ (13) output_for_t0 |
|---|
| 561 | CASE ( 'passive_scalar' ) |
|---|
| 562 | READ ( 13 ) passive_scalar |
|---|
| 563 | CASE ( 'phi' ) |
|---|
| 564 | READ ( 13 ) phi |
|---|
| 565 | CASE ( 'prandtl_number' ) |
|---|
| 566 | READ ( 13 ) prandtl_number |
|---|
| 567 | CASE ( 'precipitation' ) |
|---|
| 568 | READ ( 13 ) precipitation |
|---|
| 569 | CASE ( 'psolver' ) |
|---|
| 570 | READ ( 13 ) psolver |
|---|
| 571 | CASE ( 'pt_damping_factor' ) |
|---|
| 572 | READ ( 13 ) pt_damping_factor |
|---|
| 573 | CASE ( 'pt_damping_width' ) |
|---|
| 574 | READ ( 13 ) pt_damping_width |
|---|
| 575 | CASE ( 'pt_init' ) |
|---|
| 576 | READ ( 13 ) pt_init |
|---|
| 577 | CASE ( 'pt_reference' ) |
|---|
| 578 | READ ( 13 ) pt_reference |
|---|
| 579 | CASE ( 'pt_surface' ) |
|---|
| 580 | READ ( 13 ) pt_surface |
|---|
| 581 | CASE ( 'pt_surface_initial_change' ) |
|---|
| 582 | READ ( 13 ) pt_surface_initial_change |
|---|
| 583 | CASE ( 'pt_vertical_gradient' ) |
|---|
| 584 | READ ( 13 ) pt_vertical_gradient |
|---|
| 585 | CASE ( 'pt_vertical_gradient_level' ) |
|---|
| 586 | READ ( 13 ) pt_vertical_gradient_level |
|---|
| 587 | CASE ( 'pt_vertical_gradient_level_ind' ) |
|---|
| 588 | READ ( 13 ) pt_vertical_gradient_level_ind |
|---|
| 589 | CASE ( 'q_init' ) |
|---|
| 590 | READ ( 13 ) q_init |
|---|
| 591 | CASE ( 'q_surface' ) |
|---|
| 592 | READ ( 13 ) q_surface |
|---|
| 593 | CASE ( 'q_surface_initial_change' ) |
|---|
| 594 | READ ( 13 ) q_surface_initial_change |
|---|
| 595 | CASE ( 'q_vertical_gradient' ) |
|---|
| 596 | READ ( 13 ) q_vertical_gradient |
|---|
| 597 | CASE ( 'q_vertical_gradient_level' ) |
|---|
| 598 | READ ( 13 ) q_vertical_gradient_level |
|---|
| 599 | CASE ( 'q_vertical_gradient_level_ind' ) |
|---|
| 600 | READ ( 13 ) q_vertical_gradient_level_ind |
|---|
| 601 | CASE ( 'cloud_top_radiation' ) |
|---|
| 602 | READ ( 13 ) cloud_top_radiation |
|---|
| 603 | CASE ( 'random_generator' ) |
|---|
| 604 | READ ( 13 ) random_generator |
|---|
| 605 | CASE ( 'random_heatflux' ) |
|---|
| 606 | READ ( 13 ) random_heatflux |
|---|
| 607 | CASE ( 'rayleigh_damping_factor' ) |
|---|
| 608 | READ ( 13 ) rayleigh_damping_factor |
|---|
| 609 | CASE ( 'rayleigh_damping_height' ) |
|---|
| 610 | READ ( 13 ) rayleigh_damping_height |
|---|
| 611 | CASE ( 'recycling_width' ) |
|---|
| 612 | READ ( 13 ) recycling_width |
|---|
| 613 | CASE ( 'recycling_yshift' ) |
|---|
| 614 | READ ( 13 ) recycling_yshift |
|---|
| 615 | CASE ( 'reference_state' ) |
|---|
| 616 | READ ( 13 ) reference_state |
|---|
| 617 | CASE ( 'ref_state' ) |
|---|
| 618 | READ ( 13 ) ref_state |
|---|
| 619 | CASE ( 'residual_limit' ) |
|---|
| 620 | READ ( 13 ) residual_limit |
|---|
| 621 | CASE ( 'roughness_length' ) |
|---|
| 622 | READ ( 13 ) roughness_length |
|---|
| 623 | CASE ( 'runnr' ) |
|---|
| 624 | READ ( 13 ) runnr |
|---|
| 625 | CASE ( 'run_coupled' ) |
|---|
| 626 | READ ( 13 ) run_coupled |
|---|
| 627 | CASE ( 's_init' ) |
|---|
| 628 | READ ( 13 ) s_init |
|---|
| 629 | CASE ( 's_surface' ) |
|---|
| 630 | READ ( 13 ) s_surface |
|---|
| 631 | CASE ( 's_surface_initial_change' ) |
|---|
| 632 | READ ( 13 ) s_surface_initial_change |
|---|
| 633 | CASE ( 's_vertical_gradient' ) |
|---|
| 634 | READ ( 13 ) s_vertical_gradient |
|---|
| 635 | CASE ( 's_vertical_gradient_level' ) |
|---|
| 636 | READ ( 13 ) s_vertical_gradient_level |
|---|
| 637 | CASE ( 's_vertical_gradient_level_ind' ) |
|---|
| 638 | READ ( 13 ) s_vertical_gradient_level_ind |
|---|
| 639 | CASE ( 'sa_init' ) |
|---|
| 640 | READ ( 13 ) sa_init |
|---|
| 641 | CASE ( 'sa_surface' ) |
|---|
| 642 | READ ( 13 ) sa_surface |
|---|
| 643 | CASE ( 'sa_vertical_gradient' ) |
|---|
| 644 | READ ( 13 ) sa_vertical_gradient |
|---|
| 645 | CASE ( 'sa_vertical_gradient_level' ) |
|---|
| 646 | READ ( 13 ) sa_vertical_gradient_level |
|---|
| 647 | CASE ( 'scalar_advec' ) |
|---|
| 648 | READ ( 13 ) scalar_advec |
|---|
| 649 | CASE ( 'simulated_time' ) |
|---|
| 650 | READ ( 13 ) simulated_time |
|---|
| 651 | CASE ( 'surface_heatflux' ) |
|---|
| 652 | READ ( 13 ) surface_heatflux |
|---|
| 653 | CASE ( 'surface_pressure' ) |
|---|
| 654 | READ ( 13 ) surface_pressure |
|---|
| 655 | CASE ( 'surface_scalarflux' ) |
|---|
| 656 | READ ( 13 ) surface_scalarflux |
|---|
| 657 | CASE ( 'surface_waterflux' ) |
|---|
| 658 | READ ( 13 ) surface_waterflux |
|---|
| 659 | CASE ( 'time_coupling' ) |
|---|
| 660 | READ ( 13 ) time_coupling |
|---|
| 661 | CASE ( 'time_disturb' ) |
|---|
| 662 | READ ( 13 ) time_disturb |
|---|
| 663 | CASE ( 'time_dopr' ) |
|---|
| 664 | READ ( 13 ) time_dopr |
|---|
| 665 | CASE ( 'time_domask' ) |
|---|
| 666 | READ ( 13 ) time_domask |
|---|
| 667 | CASE ( 'time_dopr_av' ) |
|---|
| 668 | READ ( 13 ) time_dopr_av |
|---|
| 669 | CASE ( 'time_dopr_listing' ) |
|---|
| 670 | READ ( 13 ) time_dopr_listing |
|---|
| 671 | CASE ( 'time_dopts' ) |
|---|
| 672 | READ ( 13 ) time_dopts |
|---|
| 673 | CASE ( 'time_dosp' ) |
|---|
| 674 | READ ( 13 ) time_dosp |
|---|
| 675 | CASE ( 'time_dots' ) |
|---|
| 676 | READ ( 13 ) time_dots |
|---|
| 677 | CASE ( 'time_do2d_xy' ) |
|---|
| 678 | READ ( 13 ) time_do2d_xy |
|---|
| 679 | CASE ( 'time_do2d_xz' ) |
|---|
| 680 | READ ( 13 ) time_do2d_xz |
|---|
| 681 | CASE ( 'time_do2d_yz' ) |
|---|
| 682 | READ ( 13 ) time_do2d_yz |
|---|
| 683 | CASE ( 'time_do3d' ) |
|---|
| 684 | READ ( 13 ) time_do3d |
|---|
| 685 | CASE ( 'time_do_av' ) |
|---|
| 686 | READ ( 13 ) time_do_av |
|---|
| 687 | CASE ( 'time_do_sla' ) |
|---|
| 688 | READ ( 13 ) time_do_sla |
|---|
| 689 | CASE ( 'time_dvrp' ) |
|---|
| 690 | READ ( 13 ) time_dvrp |
|---|
| 691 | CASE ( 'time_radiation' ) |
|---|
| 692 | READ ( 13 ) time_radiation |
|---|
| 693 | CASE ( 'time_restart' ) |
|---|
| 694 | READ ( 13 ) time_restart |
|---|
| 695 | CASE ( 'time_run_control' ) |
|---|
| 696 | READ ( 13 ) time_run_control |
|---|
| 697 | CASE ( 'time_since_reference_point' ) |
|---|
| 698 | READ ( 13 ) time_since_reference_point |
|---|
| 699 | CASE ( 'timestep_scheme' ) |
|---|
| 700 | READ ( 13 ) timestep_scheme |
|---|
| 701 | CASE ( 'topography' ) |
|---|
| 702 | READ ( 13 ) topography |
|---|
| 703 | CASE ( 'topography_grid_convention' ) |
|---|
| 704 | READ ( 13 ) topography_grid_convention |
|---|
| 705 | CASE ( 'top_heatflux' ) |
|---|
| 706 | READ ( 13 ) top_heatflux |
|---|
| 707 | CASE ( 'top_momentumflux_u' ) |
|---|
| 708 | READ ( 13 ) top_momentumflux_u |
|---|
| 709 | CASE ( 'top_momentumflux_v' ) |
|---|
| 710 | READ ( 13 ) top_momentumflux_v |
|---|
| 711 | CASE ( 'top_salinityflux' ) |
|---|
| 712 | READ ( 13 ) top_salinityflux |
|---|
| 713 | CASE ( 'top_scalarflux' ) |
|---|
| 714 | READ ( 13 ) top_scalarflux |
|---|
| 715 | CASE ( 'tsc' ) |
|---|
| 716 | READ ( 13 ) tsc |
|---|
| 717 | CASE ( 'collision_turbulence' ) |
|---|
| 718 | READ ( 13 ) collision_turbulence |
|---|
| 719 | CASE ( 'tunnel_height' ) |
|---|
| 720 | READ ( 13 ) tunnel_height |
|---|
| 721 | CASE ( 'tunnel_length' ) |
|---|
| 722 | READ ( 13 ) tunnel_length |
|---|
| 723 | CASE ( 'tunnel_width_x' ) |
|---|
| 724 | READ ( 13 ) tunnel_width_x |
|---|
| 725 | CASE ( 'tunnel_width_y' ) |
|---|
| 726 | READ ( 13 ) tunnel_width_y |
|---|
| 727 | CASE ( 'tunnel_wall_depth' ) |
|---|
| 728 | READ ( 13 ) tunnel_wall_depth |
|---|
| 729 | CASE ( 'turbulent_inflow' ) |
|---|
| 730 | READ ( 13 ) turbulent_inflow |
|---|
| 731 | CASE ( 'u_bulk' ) |
|---|
| 732 | READ ( 13 ) u_bulk |
|---|
| 733 | CASE ( 'u_init' ) |
|---|
| 734 | READ ( 13 ) u_init |
|---|
| 735 | CASE ( 'u_max' ) |
|---|
| 736 | READ ( 13 ) u_max |
|---|
| 737 | CASE ( 'u_max_ijk' ) |
|---|
| 738 | READ ( 13 ) u_max_ijk |
|---|
| 739 | CASE ( 'ug' ) |
|---|
| 740 | READ ( 13 ) ug |
|---|
| 741 | CASE ( 'ug_surface' ) |
|---|
| 742 | READ ( 13 ) ug_surface |
|---|
| 743 | CASE ( 'ug_vertical_gradient' ) |
|---|
| 744 | READ ( 13 ) ug_vertical_gradient |
|---|
| 745 | CASE ( 'ug_vertical_gradient_level' ) |
|---|
| 746 | READ ( 13 ) ug_vertical_gradient_level |
|---|
| 747 | CASE ( 'ug_vertical_gradient_level_ind' ) |
|---|
| 748 | READ ( 13 ) ug_vertical_gradient_level_ind |
|---|
| 749 | CASE ( 'use_surface_fluxes' ) |
|---|
| 750 | READ ( 13 ) use_surface_fluxes |
|---|
| 751 | CASE ( 'use_top_fluxes' ) |
|---|
| 752 | READ ( 13 ) use_top_fluxes |
|---|
| 753 | CASE ( 'use_ug_for_galilei_tr' ) |
|---|
| 754 | READ ( 13 ) use_ug_for_galilei_tr |
|---|
| 755 | CASE ( 'use_upstream_for_tke' ) |
|---|
| 756 | READ ( 13 ) use_upstream_for_tke |
|---|
| 757 | CASE ( 'v_bulk' ) |
|---|
| 758 | READ ( 13 ) v_bulk |
|---|
| 759 | CASE ( 'v_init' ) |
|---|
| 760 | READ ( 13 ) v_init |
|---|
| 761 | CASE ( 'v_max' ) |
|---|
| 762 | READ ( 13 ) v_max |
|---|
| 763 | CASE ( 'v_max_ijk' ) |
|---|
| 764 | READ ( 13 ) v_max_ijk |
|---|
| 765 | CASE ( 'ventilation_effect' ) |
|---|
| 766 | READ ( 13 ) ventilation_effect |
|---|
| 767 | CASE ( 'vg' ) |
|---|
| 768 | READ ( 13 ) vg |
|---|
| 769 | CASE ( 'vg_surface' ) |
|---|
| 770 | READ ( 13 ) vg_surface |
|---|
| 771 | CASE ( 'vg_vertical_gradient' ) |
|---|
| 772 | READ ( 13 ) vg_vertical_gradient |
|---|
| 773 | CASE ( 'vg_vertical_gradient_level' ) |
|---|
| 774 | READ ( 13 ) vg_vertical_gradient_level |
|---|
| 775 | CASE ( 'vg_vertical_gradient_level_ind' ) |
|---|
| 776 | READ ( 13 ) vg_vertical_gradient_level_ind |
|---|
| 777 | CASE ( 'virtual_flight' ) |
|---|
| 778 | READ ( 13 ) virtual_flight |
|---|
| 779 | CASE ( 'volume_flow_area' ) |
|---|
| 780 | READ ( 13 ) volume_flow_area |
|---|
| 781 | CASE ( 'volume_flow_initial' ) |
|---|
| 782 | READ ( 13 ) volume_flow_initial |
|---|
| 783 | CASE ( 'wall_adjustment' ) |
|---|
| 784 | READ ( 13 ) wall_adjustment |
|---|
| 785 | CASE ( 'subs_vertical_gradient' ) |
|---|
| 786 | READ ( 13 ) subs_vertical_gradient |
|---|
| 787 | CASE ( 'subs_vertical_gradient_level' ) |
|---|
| 788 | READ ( 13 ) subs_vertical_gradient_level |
|---|
| 789 | CASE ( 'subs_vertical_gradient_level_i' ) |
|---|
| 790 | READ ( 13 ) subs_vertical_gradient_level_i |
|---|
| 791 | CASE ( 'wall_heatflux' ) |
|---|
| 792 | READ ( 13 ) wall_heatflux |
|---|
| 793 | CASE ( 'wall_humidityflux' ) |
|---|
| 794 | READ ( 13 ) wall_humidityflux |
|---|
| 795 | CASE ( 'wall_scalarflux' ) |
|---|
| 796 | READ ( 13 ) wall_scalarflux |
|---|
| 797 | CASE ( 'wall_salinityflux' ) |
|---|
| 798 | READ ( 13 ) wall_salinityflux |
|---|
| 799 | CASE ( 'w_max' ) |
|---|
| 800 | READ ( 13 ) w_max |
|---|
| 801 | CASE ( 'w_max_ijk' ) |
|---|
| 802 | READ ( 13 ) w_max_ijk |
|---|
| 803 | CASE ( 'zeta_max' ) |
|---|
| 804 | READ ( 13 ) zeta_max |
|---|
| 805 | CASE ( 'zeta_min' ) |
|---|
| 806 | READ ( 13 ) zeta_min |
|---|
| 807 | CASE ( 'z0h_factor' ) |
|---|
| 808 | READ ( 13 ) z0h_factor |
|---|
| 809 | |
|---|
| 810 | CASE DEFAULT |
|---|
| 811 | WRITE( message_string, * ) 'unknown variable named "', & |
|---|
| 812 | TRIM( variable_chr ), '" found in', & |
|---|
| 813 | ' data from prior run on PE ', myid |
|---|
| 814 | CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 ) |
|---|
| 815 | END SELECT |
|---|
| 816 | ! |
|---|
| 817 | !-- Read next string |
|---|
| 818 | READ ( 13 ) variable_chr |
|---|
| 819 | |
|---|
| 820 | ENDDO |
|---|
| 821 | |
|---|
| 822 | IF ( virtual_flight ) CALL flight_read_restart_data |
|---|
| 823 | |
|---|
| 824 | IF ( synthetic_turbulence_generator ) CALL stg_read_restart_data |
|---|
| 825 | |
|---|
| 826 | END SUBROUTINE read_var_list |
|---|
| 827 | |
|---|
| 828 | |
|---|
| 829 | |
|---|
| 830 | !------------------------------------------------------------------------------! |
|---|
| 831 | ! Description: |
|---|
| 832 | ! ------------ |
|---|
| 833 | !> Skipping the global control variables from restart-file (binary format) |
|---|
| 834 | !> except some information needed when reading restart data from a previous |
|---|
| 835 | !> run which used a smaller total domain or/and a different domain decomposition. |
|---|
| 836 | !------------------------------------------------------------------------------! |
|---|
| 837 | |
|---|
| 838 | SUBROUTINE read_parts_of_var_list |
|---|
| 839 | |
|---|
| 840 | |
|---|
| 841 | USE arrays_3d, & |
|---|
| 842 | ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg |
|---|
| 843 | |
|---|
| 844 | USE control_parameters |
|---|
| 845 | |
|---|
| 846 | USE indices, & |
|---|
| 847 | ONLY: nz, nx, nx_on_file, ny, ny_on_file |
|---|
| 848 | |
|---|
| 849 | USE kinds |
|---|
| 850 | |
|---|
| 851 | USE pegrid |
|---|
| 852 | |
|---|
| 853 | USE statistics, & |
|---|
| 854 | ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, & |
|---|
| 855 | v_max, v_max_ijk, w_max, w_max_ijk |
|---|
| 856 | |
|---|
| 857 | IMPLICIT NONE |
|---|
| 858 | |
|---|
| 859 | CHARACTER (LEN=10) :: version_on_file |
|---|
| 860 | CHARACTER (LEN=20) :: momentum_advec_check |
|---|
| 861 | CHARACTER (LEN=20) :: scalar_advec_check |
|---|
| 862 | CHARACTER (LEN=30) :: variable_chr |
|---|
| 863 | CHARACTER (LEN=1) :: cdum |
|---|
| 864 | |
|---|
| 865 | INTEGER(iwp) :: max_pr_user_on_file |
|---|
| 866 | INTEGER(iwp) :: nz_on_file |
|---|
| 867 | INTEGER(iwp) :: statistic_regions_on_file |
|---|
| 868 | INTEGER(iwp) :: tmp_mpru |
|---|
| 869 | INTEGER(iwp) :: tmp_sr |
|---|
| 870 | |
|---|
| 871 | REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file |
|---|
| 872 | REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file |
|---|
| 873 | |
|---|
| 874 | |
|---|
| 875 | CALL check_open( 13 ) |
|---|
| 876 | |
|---|
| 877 | READ ( 13 ) version_on_file |
|---|
| 878 | |
|---|
| 879 | |
|---|
| 880 | ! |
|---|
| 881 | !-- Read number of PEs and horizontal index bounds of all PEs used in previous |
|---|
| 882 | !-- run |
|---|
| 883 | READ ( 13 ) variable_chr |
|---|
| 884 | IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN |
|---|
| 885 | WRITE( message_string, * ) 'numprocs not found in data from prior ', & |
|---|
| 886 | 'run on PE ', myid |
|---|
| 887 | CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 ) |
|---|
| 888 | ENDIF |
|---|
| 889 | READ ( 13 ) numprocs_previous_run |
|---|
| 890 | |
|---|
| 891 | IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN |
|---|
| 892 | ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) ) |
|---|
| 893 | ENDIF |
|---|
| 894 | |
|---|
| 895 | READ ( 13 ) variable_chr |
|---|
| 896 | IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN |
|---|
| 897 | WRITE( message_string, * ) 'hor_index_bounds not found in data from ', & |
|---|
| 898 | 'prior run on PE ', myid |
|---|
| 899 | CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 ) |
|---|
| 900 | ENDIF |
|---|
| 901 | READ ( 13 ) hor_index_bounds_previous_run |
|---|
| 902 | |
|---|
| 903 | ! |
|---|
| 904 | !-- Read vertical number of gridpoints and number of different areas used |
|---|
| 905 | !-- for computing statistics. Allocate arrays depending on these values, |
|---|
| 906 | !-- which are needed for the following read instructions. |
|---|
| 907 | READ ( 13 ) variable_chr |
|---|
| 908 | IF ( TRIM( variable_chr ) /= 'nz' ) THEN |
|---|
| 909 | message_string = 'nz not found in restart data file' |
|---|
| 910 | CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 ) |
|---|
| 911 | ENDIF |
|---|
| 912 | READ ( 13 ) nz_on_file |
|---|
| 913 | IF ( nz_on_file /= nz ) THEN |
|---|
| 914 | WRITE( message_string, * ) 'mismatch concerning number of ', & |
|---|
| 915 | 'gridpoints along z', & |
|---|
| 916 | '&nz on file = "', nz_on_file, '"', & |
|---|
| 917 | '&nz from run = "', nz, '"' |
|---|
| 918 | CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 ) |
|---|
| 919 | ENDIF |
|---|
| 920 | |
|---|
| 921 | READ ( 13 ) variable_chr |
|---|
| 922 | IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN |
|---|
| 923 | message_string = 'max_pr_user not found in restart data file' |
|---|
| 924 | CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 ) |
|---|
| 925 | ENDIF |
|---|
| 926 | READ ( 13 ) max_pr_user_on_file |
|---|
| 927 | IF ( max_pr_user_on_file /= max_pr_user ) THEN |
|---|
| 928 | WRITE( message_string, * ) 'number of user profiles on res', & |
|---|
| 929 | 'tart data file differs from the current ', & |
|---|
| 930 | 'run&max_pr_user on file = "', & |
|---|
| 931 | max_pr_user_on_file, '"', & |
|---|
| 932 | '&max_pr_user from run = "', & |
|---|
| 933 | max_pr_user, '"' |
|---|
| 934 | CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 ) |
|---|
| 935 | tmp_mpru = MIN( max_pr_user_on_file, max_pr_user ) |
|---|
| 936 | ELSE |
|---|
| 937 | tmp_mpru = max_pr_user |
|---|
| 938 | ENDIF |
|---|
| 939 | |
|---|
| 940 | READ ( 13 ) variable_chr |
|---|
| 941 | IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN |
|---|
| 942 | message_string = 'statistic_regions not found in restart data file' |
|---|
| 943 | CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 ) |
|---|
| 944 | ENDIF |
|---|
| 945 | READ ( 13 ) statistic_regions_on_file |
|---|
| 946 | IF ( statistic_regions_on_file /= statistic_regions ) THEN |
|---|
| 947 | WRITE( message_string, * ) 'statistic regions on restart data file ',& |
|---|
| 948 | 'differ from the current run', & |
|---|
| 949 | '&statistic regions on file = "', & |
|---|
| 950 | statistic_regions_on_file, '"', & |
|---|
| 951 | '&statistic regions from run = "', & |
|---|
| 952 | statistic_regions, '"', & |
|---|
| 953 | '&statistic data may be lost!' |
|---|
| 954 | CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 ) |
|---|
| 955 | tmp_sr = MIN( statistic_regions_on_file, statistic_regions ) |
|---|
| 956 | ELSE |
|---|
| 957 | tmp_sr = statistic_regions |
|---|
| 958 | ENDIF |
|---|
| 959 | |
|---|
| 960 | ! |
|---|
| 961 | !-- Now read and check some control parameters and skip the rest |
|---|
| 962 | READ ( 13 ) variable_chr |
|---|
| 963 | |
|---|
| 964 | DO WHILE ( TRIM( variable_chr ) /= '*** end ***' ) |
|---|
| 965 | |
|---|
| 966 | SELECT CASE ( TRIM( variable_chr ) ) |
|---|
| 967 | |
|---|
| 968 | CASE ( 'average_count_pr' ) |
|---|
| 969 | READ ( 13 ) average_count_pr |
|---|
| 970 | IF ( average_count_pr /= 0 ) THEN |
|---|
| 971 | WRITE( message_string, * ) 'inflow profiles not temporally ', & |
|---|
| 972 | 'averaged. &Averaging will be done now using ', & |
|---|
| 973 | average_count_pr, ' samples.' |
|---|
| 974 | CALL message( 'read_parts_of_var_list', 'PA0309', & |
|---|
| 975 | 0, 1, 0, 6, 0 ) |
|---|
| 976 | ENDIF |
|---|
| 977 | |
|---|
| 978 | CASE ( 'hom' ) |
|---|
| 979 | ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, & |
|---|
| 980 | 0:statistic_regions_on_file) ) |
|---|
| 981 | READ ( 13 ) hom_on_file |
|---|
| 982 | hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = & |
|---|
| 983 | hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) |
|---|
| 984 | DEALLOCATE( hom_on_file ) |
|---|
| 985 | |
|---|
| 986 | CASE ( 'hom_sum' ) |
|---|
| 987 | ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, & |
|---|
| 988 | 0:statistic_regions_on_file) ) |
|---|
| 989 | READ ( 13 ) hom_sum_on_file |
|---|
| 990 | hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = & |
|---|
| 991 | hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr) |
|---|
| 992 | DEALLOCATE( hom_sum_on_file ) |
|---|
| 993 | |
|---|
| 994 | CASE ( 'momentum_advec' ) |
|---|
| 995 | momentum_advec_check = momentum_advec |
|---|
| 996 | READ ( 13 ) momentum_advec |
|---|
| 997 | IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN |
|---|
| 998 | WRITE( message_string, * ) 'momentum_advec of the restart run ',& |
|---|
| 999 | 'differs from momentum_advec of the initial run.' |
|---|
| 1000 | CALL message( 'read_parts_of_var_list', 'PA0100', & |
|---|
| 1001 | 1, 2, 0, 6, 0 ) |
|---|
| 1002 | END IF |
|---|
| 1003 | |
|---|
| 1004 | CASE ( 'nx' ) |
|---|
| 1005 | READ ( 13 ) nx_on_file |
|---|
| 1006 | |
|---|
| 1007 | CASE ( 'ny' ) |
|---|
| 1008 | READ ( 13 ) ny_on_file |
|---|
| 1009 | |
|---|
| 1010 | CASE ( 'ref_state' ) |
|---|
| 1011 | READ ( 13 ) ref_state |
|---|
| 1012 | |
|---|
| 1013 | CASE ( 'scalar_advec' ) |
|---|
| 1014 | scalar_advec_check = scalar_advec |
|---|
| 1015 | READ ( 13 ) scalar_advec |
|---|
| 1016 | IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN |
|---|
| 1017 | WRITE( message_string, * ) 'scalar_advec of the restart run ', & |
|---|
| 1018 | 'differs from scalar_advec of the initial run.' |
|---|
| 1019 | CALL message( 'read_parts_of_var_list', 'PA0101', & |
|---|
| 1020 | 1, 2, 0, 6, 0 ) |
|---|
| 1021 | END IF |
|---|
| 1022 | |
|---|
| 1023 | CASE DEFAULT |
|---|
| 1024 | |
|---|
| 1025 | READ ( 13 ) cdum |
|---|
| 1026 | |
|---|
| 1027 | END SELECT |
|---|
| 1028 | |
|---|
| 1029 | READ ( 13 ) variable_chr |
|---|
| 1030 | |
|---|
| 1031 | ENDDO |
|---|
| 1032 | |
|---|
| 1033 | ! |
|---|
| 1034 | !-- Calculate the temporal average of vertical profiles, if neccessary |
|---|
| 1035 | IF ( average_count_pr /= 0 ) THEN |
|---|
| 1036 | hom_sum = hom_sum / REAL( average_count_pr, KIND=wp ) |
|---|
| 1037 | ENDIF |
|---|
| 1038 | |
|---|
| 1039 | |
|---|
| 1040 | END SUBROUTINE read_parts_of_var_list |
|---|
| 1041 | |
|---|
| 1042 | |
|---|
| 1043 | |
|---|
| 1044 | !------------------------------------------------------------------------------! |
|---|
| 1045 | ! Description: |
|---|
| 1046 | ! ------------ |
|---|
| 1047 | !> Skipping the global control variables from restart-file (binary format) |
|---|
| 1048 | !------------------------------------------------------------------------------! |
|---|
| 1049 | |
|---|
| 1050 | SUBROUTINE skip_var_list |
|---|
| 1051 | |
|---|
| 1052 | USE control_parameters, & |
|---|
| 1053 | ONLY: virtual_flight |
|---|
| 1054 | |
|---|
| 1055 | USE flight_mod, & |
|---|
| 1056 | ONLY: flight_skip_var_list |
|---|
| 1057 | |
|---|
| 1058 | IMPLICIT NONE |
|---|
| 1059 | |
|---|
| 1060 | CHARACTER (LEN=10) :: version_on_file |
|---|
| 1061 | CHARACTER (LEN=30) :: variable_chr |
|---|
| 1062 | |
|---|
| 1063 | CHARACTER (LEN=1) :: cdum |
|---|
| 1064 | |
|---|
| 1065 | |
|---|
| 1066 | READ ( 13 ) version_on_file |
|---|
| 1067 | |
|---|
| 1068 | READ ( 13 ) variable_chr |
|---|
| 1069 | |
|---|
| 1070 | DO WHILE ( TRIM( variable_chr ) /= '*** end ***' ) |
|---|
| 1071 | |
|---|
| 1072 | READ ( 13 ) cdum |
|---|
| 1073 | READ ( 13 ) variable_chr |
|---|
| 1074 | |
|---|
| 1075 | ENDDO |
|---|
| 1076 | ! |
|---|
| 1077 | !-- In case of virtual flights, skip also variables related to |
|---|
| 1078 | !-- this module. |
|---|
| 1079 | IF ( virtual_flight ) CALL flight_skip_var_list |
|---|
| 1080 | |
|---|
| 1081 | |
|---|
| 1082 | END SUBROUTINE skip_var_list |
|---|
