Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1227

Last change on this file since 1227 was 1196, checked in by heinze, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 34.7 KB

Line
1	SUBROUTINE read_var_list
2
3	!--------------------------------------------------------------------------------!
4	! This file is part of PALM.
5	!
6	! PALM is free software: you can redistribute it and/or modify it under the terms
7	! of the GNU General Public License as published by the Free Software Foundation,
8	! either version 3 of the License, or (at your option) any later version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2012 Leibniz University Hannover
18	!--------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! ------------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: read_var_list.f90 1196 2013-07-01 12:31:31Z fuhrmann $
27	!
28	! 1195 2013-07-01 12:27:57Z heinze
29	! Bugfix: allocate ref_state
30	!
31	! 1179 2013-06-14 05:57:58Z raasch
32	! +ref_state
33	!
34	! 1115 2013-03-26 18:16:16Z hoffmann
35	! unused variables removed
36	!
37	! 1092 2013-02-02 11:24:22Z raasch
38	! unused variables removed
39	!
40	! 1065 2012-11-22 17:42:36Z hoffmann
41	! +nc, c_sedimentation, limiter_sedimentation, turbulence
42	! -mu_constant, mu_constant_value
43	!
44	! 1053 2012-11-13 17:11:03Z hoffmann
45	! necessary expansions according to the two new prognostic equations (nr, qr)
46	! of the two-moment cloud physics scheme:
47	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
48	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
49	! +surface_waterflux_*
50	!
51	! in addition, steering parameters parameters of the two-moment cloud physics
52	! scheme:
53	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
54	!
55	! 1036 2012-10-22 13:43:42Z raasch
56	! code put under GPL (PALM 3.9)
57	!
58	! 1015 2012-09-27 09:23:24Z raasch
59	! -adjust_mixing_length
60	!
61	! 1003 2012-09-14 14:35:53Z raasch
62	! -grid_matching
63	!
64	! 1001 2012-09-13 14:08:46Z raasch
65	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
66	! overshoot_limit_, ups_limit_
67	!
68	! 978 2012-08-09 08:28:32Z fricke
69	! -km_damp_max, outflow_damping_width
70	! +pt_damping_factor, pt_damping_width
71	! +z0h_factor
72	!
73	! 940 2012-07-09 14:31:00Z raasch
74	! +neutral
75	!
76	! 927 2012-06-06 19:15:04Z raasch
77	! +masking_method
78	!
79	! 849 2012-03-15 10:35:09Z raasch
80	! first_call_advec_particles renamed first_call_lpm
81	!
82	! 824 2012-02-17 09:09:57Z raasch
83	! +curvature_solution_effects
84	!
85	! 626 2010-12-10 13:04:12Z suehring
86	! idum replaced by cdum in read_parts_of_var_list
87	!
88	! 622 2010-12-10 08:08:13Z raasch
89	! +collective_wait
90	!
91	! 600 2010-11-24 16:10:51Z raasch
92	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
93	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
94	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
95	! in routine skip_var_list (end of this file), variable ldum is replaced
96	! by cdum(LEN=1), because otherwise read errors (too few data on file)
97	! appear due to one of the additional parameters (cycle_mg) which are now
98	! stored on the restart file
99	!
100	! 591 2010-10-28 06:35:52Z helmke
101	! remove print command
102	!
103	! 587 2010-10-27 08:36:51Z helmke
104	! +time_domask
105	!
106	! 580 2010-10-05 13:59:11Z heinze
107	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
108	! ws_vertical_gradient_level to subs_vertical_gradient_level and
109	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
110	!
111	! 411 2009-12-11 14:15:58Z heinze
112	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
113	! ws_vertical_gradient_level_ind
114	!
115	! 345 2009-07-01 14:37:56Z heinze
116	! +output_for_t0
117	! dt_fixed is read into a dummy variable.
118	! Output of messages replaced by message handling routine.
119	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
120	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
121	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
122	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
123	!
124	! 216 2008-11-25 07:12:43Z raasch
125	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
126	!
127	! 173 2008-05-23 20:39:38Z raasch
128	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
129	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
130	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
131	! recycling_width, turbulent_inflow,
132	! -cross_ts_*, npex, npey,
133	! hom_sum, volume_flow_area, volume_flow_initial moved from
134	! read_3d_binary to here,
135	! routines read_parts_of_var_list and skip_var_list added at the end
136	!
137	! 138 2007-11-28 10:03:58Z letzel
138	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
139	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
140	! plant_canopy, time_sort_particles
141	!
142	! 102 2007-07-27 09:09:17Z raasch
143	! +time_coupling, top_momentumflux_u\|v
144	!
145	! 95 2007-06-02 16:48:38Z raasch
146	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
147	! sa_vertical_gradient_level, bottom/top_salinity_flux
148	!
149	! 87 2007-05-22 15:46:47Z raasch
150	! +max_pr_user (version 3.1), var_hom renamed pr_palm
151	!
152	! 75 2007-03-22 09:54:05Z raasch
153	! +loop_optimization, pt_reference, moisture renamed humidity
154	!
155	! 20 2007-02-26 00:12:32Z raasch
156	! +top_heatflux, use_top_fluxes
157	!
158	! RCS Log replace by Id keyword, revision history cleaned up
159	!
160	! Revision 1.34 2006/08/22 14:14:27 raasch
161	! +dz_max
162	!
163	! Revision 1.1 1998/03/18 20:18:48 raasch
164	! Initial revision
165	!
166	!
167	! Description:
168	! ------------
169	! Reading values of global control variables from restart-file (binary format)
170	!------------------------------------------------------------------------------!
171
172	USE arrays_3d
173	USE averaging
174	USE cloud_parameters
175	USE control_parameters
176	USE grid_variables
177	USE indices
178	USE model_1d
179	USE netcdf_control
180	USE particle_attributes
181	USE pegrid
182	USE profil_parameter
183	USE statistics
184
185	IMPLICIT NONE
186
187	CHARACTER (LEN=10) :: binary_version, version_on_file
188	CHARACTER (LEN=30) :: variable_chr
189
190
191	CALL check_open( 13 )
192
193	!
194	!-- Make version number check first
195	READ ( 13 ) version_on_file
196	binary_version = '3.9a'
197	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
198	WRITE( message_string, * ) 'version mismatch concerning control ', &
199	'variables', &
200	'&version on file = "', &
201	TRIM( version_on_file ), '"', &
202	'&version on program = "', &
203	TRIM( binary_version ), '"'
204	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
205	ENDIF
206
207	!
208	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
209	!-- run
210	READ ( 13 ) variable_chr
211	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
212	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
213	'run on PE ', myid
214	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
215	ENDIF
216	READ ( 13 ) numprocs_previous_run
217
218	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
219	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
220	ENDIF
221
222	READ ( 13 ) variable_chr
223	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
224	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
225	'prior run on PE ', myid
226	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
227	ENDIF
228	READ ( 13 ) hor_index_bounds_previous_run
229
230	!
231	!-- Read vertical number of gridpoints and number of different areas used
232	!-- for computing statistics. Allocate arrays depending on these values,
233	!-- which are needed for the following read instructions.
234	READ ( 13 ) variable_chr
235	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
236	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
237	myid
238	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
239	ENDIF
240	READ ( 13 ) nz
241
242	READ ( 13 ) variable_chr
243	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
244	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
245	'prior run on PE ', myid
246	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
247	ENDIF
248	READ ( 13 ) max_pr_user ! This value is checked against the number of
249	! user profiles given for the current run
250	! in routine user_parin (it has to match)
251
252	READ ( 13 ) variable_chr
253	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
254	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
255	'prior run on PE ', myid
256	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
257	ENDIF
258	READ ( 13 ) statistic_regions
259	IF ( .NOT. ALLOCATED( ug ) ) THEN
260	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
261	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
262	ref_state(0:nz+1), sa_init(0:nz+1), &
263	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
264	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
265	ENDIF
266
267	!
268	!-- Now read all control parameters:
269	!-- Caution: When the following read instructions have been changed, the
270	!-- ------- version number stored in the variable binary_version has to be
271	!-- increased. The same changes must also be done in write_var_list.
272	READ ( 13 ) variable_chr
273	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
274
275	SELECT CASE ( TRIM( variable_chr ) )
276
277	CASE ( 'advected_distance_x' )
278	READ ( 13 ) advected_distance_x
279	CASE ( 'advected_distance_y' )
280	READ ( 13 ) advected_distance_y
281	CASE ( 'alpha_surface' )
282	READ ( 13 ) alpha_surface
283	CASE ( 'average_count_pr' )
284	READ ( 13 ) average_count_pr
285	CASE ( 'average_count_sp' )
286	READ ( 13 ) average_count_sp
287	CASE ( 'average_count_3d' )
288	READ ( 13 ) average_count_3d
289	CASE ( 'bc_e_b' )
290	READ ( 13 ) bc_e_b
291	CASE ( 'bc_lr' )
292	READ ( 13 ) bc_lr
293	CASE ( 'bc_ns' )
294	READ ( 13 ) bc_ns
295	CASE ( 'bc_p_b' )
296	READ ( 13 ) bc_p_b
297	CASE ( 'bc_p_t' )
298	READ ( 13 ) bc_p_t
299	CASE ( 'bc_pt_b' )
300	READ ( 13 ) bc_pt_b
301	CASE ( 'bc_pt_t' )
302	READ ( 13 ) bc_pt_t
303	CASE ( 'bc_pt_t_val' )
304	READ ( 13 ) bc_pt_t_val
305	CASE ( 'bc_q_b' )
306	READ ( 13 ) bc_q_b
307	CASE ( 'bc_q_t' )
308	READ ( 13 ) bc_q_t
309	CASE ( 'bc_q_t_val' )
310	READ ( 13 ) bc_q_t_val
311	CASE ( 'bc_s_b' )
312	READ ( 13 ) bc_s_b
313	CASE ( 'bc_s_t' )
314	READ ( 13 ) bc_s_t
315	CASE ( 'bc_sa_t' )
316	READ ( 13 ) bc_sa_t
317	CASE ( 'bc_uv_b' )
318	READ ( 13 ) bc_uv_b
319	CASE ( 'bc_uv_t' )
320	READ ( 13 ) bc_uv_t
321	CASE ( 'bottom_salinityflux' )
322	READ ( 13 ) bottom_salinityflux
323	CASE ( 'building_height' )
324	READ ( 13 ) building_height
325	CASE ( 'building_length_x' )
326	READ ( 13 ) building_length_x
327	CASE ( 'building_length_y' )
328	READ ( 13 ) building_length_y
329	CASE ( 'building_wall_left' )
330	READ ( 13 ) building_wall_left
331	CASE ( 'building_wall_south' )
332	READ ( 13 ) building_wall_south
333	CASE ( 'call_psolver_at_all_substeps' )
334	READ ( 13 ) call_psolver_at_all_substeps
335	CASE ( 'canopy_mode' )
336	READ ( 13 ) canopy_mode
337	CASE ( 'canyon_height' )
338	READ ( 13 ) canyon_height
339	CASE ( 'canyon_width_x' )
340	READ ( 13 ) canyon_width_x
341	CASE ( 'canyon_width_y' )
342	READ ( 13 ) canyon_width_y
343	CASE ( 'canyon_wall_left' )
344	READ ( 13 ) canyon_wall_left
345	CASE ( 'canyon_wall_south' )
346	READ ( 13 ) canyon_wall_south
347	CASE ( 'c_sedimentation' )
348	READ ( 13 ) c_sedimentation
349	CASE ( 'cfl_factor' )
350	READ ( 13 ) cfl_factor
351	CASE ( 'cloud_droplets' )
352	READ ( 13 ) cloud_droplets
353	CASE ( 'cloud_physics' )
354	READ ( 13 ) cloud_physics
355	CASE ( 'cloud_scheme' )
356	READ ( 13 ) cloud_scheme
357	CASE ( 'collective_wait' )
358	READ ( 13 ) collective_wait
359	CASE ( 'conserve_volume_flow' )
360	READ ( 13 ) conserve_volume_flow
361	CASE ( 'conserve_volume_flow_mode' )
362	READ ( 13 ) conserve_volume_flow_mode
363	CASE ( 'coupling_start_time' )
364	READ ( 13 ) coupling_start_time
365	CASE ( 'cthf' )
366	READ ( 13 ) cthf
367	CASE ( 'current_timestep_number' )
368	READ ( 13 ) current_timestep_number
369	CASE ( 'curvature_solution_effects' )
370	READ ( 13 ) curvature_solution_effects
371	CASE ( 'cycle_mg' )
372	READ ( 13 ) cycle_mg
373	CASE ( 'damp_level_1d' )
374	READ ( 13 ) damp_level_1d
375	CASE ( 'dissipation_1d' )
376	READ ( 13 ) dissipation_1d
377	CASE ( 'dp_external' )
378	READ ( 13 ) dp_external
379	CASE ( 'dp_level_b' )
380	READ ( 13 ) dp_level_b
381	CASE ( 'dp_smooth' )
382	READ ( 13 ) dp_smooth
383	CASE ( 'dpdxy' )
384	READ ( 13 ) dpdxy
385	CASE ( 'drag_coefficient' )
386	READ ( 13 ) drag_coefficient
387	CASE ( 'drizzle' )
388	READ ( 13 ) drizzle
389	CASE ( 'dt_pr_1d' )
390	READ ( 13 ) dt_pr_1d
391	CASE ( 'dt_run_control_1d' )
392	READ ( 13 ) dt_run_control_1d
393	CASE ( 'dt_3d' )
394	READ ( 13 ) dt_3d
395	CASE ( 'dvrp_filecount' )
396	READ ( 13 ) dvrp_filecount
397	CASE ( 'dx' )
398	READ ( 13 ) dx
399	CASE ( 'dy' )
400	READ ( 13 ) dy
401	CASE ( 'dz' )
402	READ ( 13 ) dz
403	CASE ( 'dz_max' )
404	READ ( 13 ) dz_max
405	CASE ( 'dz_stretch_factor' )
406	READ ( 13 ) dz_stretch_factor
407	CASE ( 'dz_stretch_level' )
408	READ ( 13 ) dz_stretch_level
409	CASE ( 'e_min' )
410	READ ( 13 ) e_min
411	CASE ( 'end_time_1d' )
412	READ ( 13 ) end_time_1d
413	CASE ( 'fft_method' )
414	READ ( 13 ) fft_method
415	CASE ( 'first_call_lpm' )
416	READ ( 13 ) first_call_lpm
417	CASE ( 'galilei_transformation' )
418	READ ( 13 ) galilei_transformation
419	CASE ( 'hom' )
420	READ ( 13 ) hom
421	CASE ( 'hom_sum' )
422	READ ( 13 ) hom_sum
423	CASE ( 'humidity' )
424	READ ( 13 ) humidity
425	CASE ( 'inflow_damping_factor' )
426	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
427	ALLOCATE( inflow_damping_factor(0:nz+1) )
428	ENDIF
429	READ ( 13 ) inflow_damping_factor
430	CASE ( 'inflow_damping_height' )
431	READ ( 13 ) inflow_damping_height
432	CASE ( 'inflow_damping_width' )
433	READ ( 13 ) inflow_damping_width
434	CASE ( 'inflow_disturbance_begin' )
435	READ ( 13 ) inflow_disturbance_begin
436	CASE ( 'inflow_disturbance_end' )
437	READ ( 13 ) inflow_disturbance_end
438	CASE ( 'km_constant' )
439	READ ( 13 ) km_constant
440	CASE ( 'lad' )
441	READ ( 13 ) lad
442	CASE ( 'lad_surface' )
443	READ ( 13 ) lad_surface
444	CASE ( 'lad_vertical_gradient' )
445	READ ( 13 ) lad_vertical_gradient
446	CASE ( 'lad_vertical_gradient_level' )
447	READ ( 13 ) lad_vertical_gradient_level
448	CASE ( 'lad_vertical_gradient_level_in' )
449	READ ( 13 ) lad_vertical_gradient_level_ind
450	CASE ( 'large_scale_subsidence' )
451	READ ( 13 ) large_scale_subsidence
452	CASE ( 'leaf_surface_concentration' )
453	READ ( 13 ) leaf_surface_concentration
454	CASE ( 'limiter_sedimentation' )
455	READ ( 13 ) limiter_sedimentation
456	CASE ( 'loop_optimization' )
457	READ ( 13 ) loop_optimization
458	CASE ( 'masking_method' )
459	READ ( 13 ) masking_method
460	CASE ( 'mean_inflow_profiles' )
461	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
462	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
463	ENDIF
464	READ ( 13 ) mean_inflow_profiles
465	CASE ( 'mg_cycles' )
466	READ ( 13 ) mg_cycles
467	CASE ( 'mg_switch_to_pe0_level' )
468	READ ( 13 ) mg_switch_to_pe0_level
469	CASE ( 'mixing_length_1d' )
470	READ ( 13 ) mixing_length_1d
471	CASE ( 'momentum_advec' )
472	READ ( 13 ) momentum_advec
473	CASE ( 'nc_const' )
474	READ ( 13 ) nc_const
475	CASE ( 'netcdf_precision' )
476	READ ( 13 ) netcdf_precision
477	CASE ( 'neutral' )
478	READ ( 13 ) neutral
479	CASE ( 'ngsrb' )
480	READ ( 13 ) ngsrb
481	CASE ( 'nsor' )
482	READ ( 13 ) nsor
483	CASE ( 'nsor_ini' )
484	READ ( 13 ) nsor_ini
485	CASE ( 'nx' )
486	READ ( 13 ) nx
487	nx_on_file = nx
488	CASE ( 'ny' )
489	READ ( 13 ) ny
490	ny_on_file = ny
491	CASE ( 'ocean' )
492	READ ( 13 ) ocean
493	CASE ( 'old_dt' )
494	READ ( 13 ) old_dt
495	CASE ( 'omega' )
496	READ ( 13 ) omega
497	CASE ( 'omega_sor' )
498	READ ( 13 ) omega_sor
499	CASE ( 'output_for_t0' )
500	READ (13) output_for_t0
501	CASE ( 'passive_scalar' )
502	READ ( 13 ) passive_scalar
503	CASE ( 'pch_index' )
504	READ ( 13 ) pch_index
505	CASE ( 'phi' )
506	READ ( 13 ) phi
507	CASE ( 'plant_canopy' )
508	READ ( 13 ) plant_canopy
509	CASE ( 'prandtl_layer' )
510	READ ( 13 ) prandtl_layer
511	CASE ( 'prandtl_number' )
512	READ ( 13 ) prandtl_number
513	CASE ( 'precipitation' )
514	READ ( 13 ) precipitation
515	CASE ( 'psolver' )
516	READ ( 13 ) psolver
517	CASE ( 'pt_damping_factor' )
518	READ ( 13 ) pt_damping_factor
519	CASE ( 'pt_damping_width' )
520	READ ( 13 ) pt_damping_width
521	CASE ( 'pt_init' )
522	READ ( 13 ) pt_init
523	CASE ( 'pt_reference' )
524	READ ( 13 ) pt_reference
525	CASE ( 'pt_surface' )
526	READ ( 13 ) pt_surface
527	CASE ( 'pt_surface_initial_change' )
528	READ ( 13 ) pt_surface_initial_change
529	CASE ( 'pt_vertical_gradient' )
530	READ ( 13 ) pt_vertical_gradient
531	CASE ( 'pt_vertical_gradient_level' )
532	READ ( 13 ) pt_vertical_gradient_level
533	CASE ( 'pt_vertical_gradient_level_ind' )
534	READ ( 13 ) pt_vertical_gradient_level_ind
535	CASE ( 'q_init' )
536	READ ( 13 ) q_init
537	CASE ( 'q_surface' )
538	READ ( 13 ) q_surface
539	CASE ( 'q_surface_initial_change' )
540	READ ( 13 ) q_surface_initial_change
541	CASE ( 'q_vertical_gradient' )
542	READ ( 13 ) q_vertical_gradient
543	CASE ( 'q_vertical_gradient_level' )
544	READ ( 13 ) q_vertical_gradient_level
545	CASE ( 'q_vertical_gradient_level_ind' )
546	READ ( 13 ) q_vertical_gradient_level_ind
547	CASE ( 'radiation' )
548	READ ( 13 ) radiation
549	CASE ( 'random_generator' )
550	READ ( 13 ) random_generator
551	CASE ( 'random_heatflux' )
552	READ ( 13 ) random_heatflux
553	CASE ( 'rayleigh_damping_factor' )
554	READ ( 13 ) rayleigh_damping_factor
555	CASE ( 'rayleigh_damping_height' )
556	READ ( 13 ) rayleigh_damping_height
557	CASE ( 'recycling_width' )
558	READ ( 13 ) recycling_width
559	CASE ( 'reference_state' )
560	READ ( 13 ) reference_state
561	CASE ( 'ref_state' )
562	READ ( 13 ) ref_state
563	CASE ( 'residual_limit' )
564	READ ( 13 ) residual_limit
565	CASE ( 'rif_max' )
566	READ ( 13 ) rif_max
567	CASE ( 'rif_min' )
568	READ ( 13 ) rif_min
569	CASE ( 'roughness_length' )
570	READ ( 13 ) roughness_length
571	CASE ( 'runnr' )
572	READ ( 13 ) runnr
573	CASE ( 'run_coupled' )
574	READ ( 13 ) run_coupled
575	CASE ( 'sa_init' )
576	READ ( 13 ) sa_init
577	CASE ( 'sa_surface' )
578	READ ( 13 ) sa_surface
579	CASE ( 'sa_vertical_gradient' )
580	READ ( 13 ) sa_vertical_gradient
581	CASE ( 'sa_vertical_gradient_level' )
582	READ ( 13 ) sa_vertical_gradient_level
583	CASE ( 'scalar_advec' )
584	READ ( 13 ) scalar_advec
585	CASE ( 'scalar_exchange_coefficient' )
586	READ ( 13 ) scalar_exchange_coefficient
587	CASE ( 'simulated_time' )
588	READ ( 13 ) simulated_time
589	CASE ( 'surface_heatflux' )
590	READ ( 13 ) surface_heatflux
591	CASE ( 'surface_pressure' )
592	READ ( 13 ) surface_pressure
593	CASE ( 'surface_scalarflux' )
594	READ ( 13 ) surface_scalarflux
595	CASE ( 'surface_waterflux' )
596	READ ( 13 ) surface_waterflux
597	CASE ( 's_surface' )
598	READ ( 13 ) s_surface
599	CASE ( 's_surface_initial_change' )
600	READ ( 13 ) s_surface_initial_change
601	CASE ( 's_vertical_gradient' )
602	READ ( 13 ) s_vertical_gradient
603	CASE ( 's_vertical_gradient_level' )
604	READ ( 13 ) s_vertical_gradient_level
605	CASE ( 'time_coupling' )
606	READ ( 13 ) time_coupling
607	CASE ( 'time_disturb' )
608	READ ( 13 ) time_disturb
609	CASE ( 'time_dopr' )
610	READ ( 13 ) time_dopr
611	CASE ( 'time_domask' )
612	READ ( 13 ) time_domask
613	CASE ( 'time_dopr_av' )
614	READ ( 13 ) time_dopr_av
615	CASE ( 'time_dopr_listing' )
616	READ ( 13 ) time_dopr_listing
617	CASE ( 'time_dopts' )
618	READ ( 13 ) time_dopts
619	CASE ( 'time_dosp' )
620	READ ( 13 ) time_dosp
621	CASE ( 'time_dots' )
622	READ ( 13 ) time_dots
623	CASE ( 'time_do2d_xy' )
624	READ ( 13 ) time_do2d_xy
625	CASE ( 'time_do2d_xz' )
626	READ ( 13 ) time_do2d_xz
627	CASE ( 'time_do2d_yz' )
628	READ ( 13 ) time_do2d_yz
629	CASE ( 'time_do3d' )
630	READ ( 13 ) time_do3d
631	CASE ( 'time_do_av' )
632	READ ( 13 ) time_do_av
633	CASE ( 'time_do_sla' )
634	READ ( 13 ) time_do_sla
635	CASE ( 'time_dvrp' )
636	READ ( 13 ) time_dvrp
637	CASE ( 'time_restart' )
638	READ ( 13 ) time_restart
639	CASE ( 'time_run_control' )
640	READ ( 13 ) time_run_control
641	CASE ( 'time_since_reference_point' )
642	READ ( 13 ) time_since_reference_point
643	CASE ( 'time_sort_particles' )
644	READ ( 13 ) time_sort_particles
645	CASE ( 'timestep_scheme' )
646	READ ( 13 ) timestep_scheme
647	CASE ( 'topography' )
648	READ ( 13 ) topography
649	CASE ( 'topography_grid_convention' )
650	READ ( 13 ) topography_grid_convention
651	CASE ( 'top_heatflux' )
652	READ ( 13 ) top_heatflux
653	CASE ( 'top_momentumflux_u' )
654	READ ( 13 ) top_momentumflux_u
655	CASE ( 'top_momentumflux_v' )
656	READ ( 13 ) top_momentumflux_v
657	CASE ( 'top_salinityflux' )
658	READ ( 13 ) top_salinityflux
659	CASE ( 'tsc' )
660	READ ( 13 ) tsc
661	CASE ( 'turbulence' )
662	READ ( 13 ) turbulence
663	CASE ( 'turbulent_inflow' )
664	READ ( 13 ) turbulent_inflow
665	CASE ( 'u_bulk' )
666	READ ( 13 ) u_bulk
667	CASE ( 'u_init' )
668	READ ( 13 ) u_init
669	CASE ( 'u_max' )
670	READ ( 13 ) u_max
671	CASE ( 'u_max_ijk' )
672	READ ( 13 ) u_max_ijk
673	CASE ( 'ug' )
674	READ ( 13 ) ug
675	CASE ( 'ug_surface' )
676	READ ( 13 ) ug_surface
677	CASE ( 'ug_vertical_gradient' )
678	READ ( 13 ) ug_vertical_gradient
679	CASE ( 'ug_vertical_gradient_level' )
680	READ ( 13 ) ug_vertical_gradient_level
681	CASE ( 'ug_vertical_gradient_level_ind' )
682	READ ( 13 ) ug_vertical_gradient_level_ind
683	CASE ( 'use_surface_fluxes' )
684	READ ( 13 ) use_surface_fluxes
685	CASE ( 'use_top_fluxes' )
686	READ ( 13 ) use_top_fluxes
687	CASE ( 'use_ug_for_galilei_tr' )
688	READ ( 13 ) use_ug_for_galilei_tr
689	CASE ( 'use_upstream_for_tke' )
690	READ ( 13 ) use_upstream_for_tke
691	CASE ( 'v_bulk' )
692	READ ( 13 ) v_bulk
693	CASE ( 'v_init' )
694	READ ( 13 ) v_init
695	CASE ( 'v_max' )
696	READ ( 13 ) v_max
697	CASE ( 'v_max_ijk' )
698	READ ( 13 ) v_max_ijk
699	CASE ( 'ventilation_effect' )
700	READ ( 13 ) ventilation_effect
701	CASE ( 'vg' )
702	READ ( 13 ) vg
703	CASE ( 'vg_surface' )
704	READ ( 13 ) vg_surface
705	CASE ( 'vg_vertical_gradient' )
706	READ ( 13 ) vg_vertical_gradient
707	CASE ( 'vg_vertical_gradient_level' )
708	READ ( 13 ) vg_vertical_gradient_level
709	CASE ( 'vg_vertical_gradient_level_ind' )
710	READ ( 13 ) vg_vertical_gradient_level_ind
711	CASE ( 'volume_flow_area' )
712	READ ( 13 ) volume_flow_area
713	CASE ( 'volume_flow_initial' )
714	READ ( 13 ) volume_flow_initial
715	CASE ( 'wall_adjustment' )
716	READ ( 13 ) wall_adjustment
717	CASE ( 'subs_vertical_gradient' )
718	READ ( 13 ) subs_vertical_gradient
719	CASE ( 'subs_vertical_gradient_level' )
720	READ ( 13 ) subs_vertical_gradient_level
721	CASE ( 'subs_vertical_gradient_level_i' )
722	READ ( 13 ) subs_vertical_gradient_level_i
723	CASE ( 'w_max' )
724	READ ( 13 ) w_max
725	CASE ( 'w_max_ijk' )
726	READ ( 13 ) w_max_ijk
727	CASE ( 'z0h_factor' )
728	READ ( 13 ) z0h_factor
729
730	CASE DEFAULT
731	WRITE( message_string, * ) 'unknown variable named "', &
732	TRIM( variable_chr ), '" found in', &
733	' data from prior run on PE ', myid
734	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
735	END SELECT
736	!
737	!-- Read next string
738	READ ( 13 ) variable_chr
739
740	ENDDO
741
742
743	END SUBROUTINE read_var_list
744
745
746
747	SUBROUTINE read_parts_of_var_list
748
749	!------------------------------------------------------------------------------!
750	! Description:
751	! ------------
752	! Skipping the global control variables from restart-file (binary format)
753	! except some informations needed when reading restart data from a previous
754	! run which used a smaller total domain or/and a different domain decomposition.
755	!------------------------------------------------------------------------------!
756
757	USE arrays_3d
758	USE control_parameters
759	USE indices
760	USE pegrid
761	USE statistics
762
763	IMPLICIT NONE
764
765	CHARACTER (LEN=10) :: version_on_file
766	CHARACTER (LEN=30) :: variable_chr
767	CHARACTER (LEN=1) :: cdum
768
769	INTEGER :: max_pr_user_on_file, nz_on_file, &
770	statistic_regions_on_file, tmp_mpru, tmp_sr
771
772	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
773	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
774
775
776	CALL check_open( 13 )
777
778	WRITE (9,*) 'rpovl: after check open 13'
779	CALL local_flush( 9 )
780	READ ( 13 ) version_on_file
781
782	!
783	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
784	!-- run
785	READ ( 13 ) variable_chr
786	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
787	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
788	'run on PE ', myid
789	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
790	ENDIF
791	READ ( 13 ) numprocs_previous_run
792
793	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
794	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
795	ENDIF
796
797	READ ( 13 ) variable_chr
798	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
799	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
800	'prior run on PE ', myid
801	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
802	ENDIF
803	READ ( 13 ) hor_index_bounds_previous_run
804
805	!
806	!-- Read vertical number of gridpoints and number of different areas used
807	!-- for computing statistics. Allocate arrays depending on these values,
808	!-- which are needed for the following read instructions.
809	READ ( 13 ) variable_chr
810	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
811	message_string = 'nz not found in restart data file'
812	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
813	ENDIF
814	READ ( 13 ) nz_on_file
815	IF ( nz_on_file /= nz ) THEN
816	WRITE( message_string, * ) 'mismatch concerning number of ', &
817	'gridpoints along z', &
818	'&nz on file = "', nz_on_file, '"', &
819	'&nz from run = "', nz, '"'
820	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
821	ENDIF
822
823	READ ( 13 ) variable_chr
824	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
825	message_string = 'max_pr_user not found in restart data file'
826	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
827	ENDIF
828	READ ( 13 ) max_pr_user_on_file
829	IF ( max_pr_user_on_file /= max_pr_user ) THEN
830	WRITE( message_string, * ) 'number of user profiles on res', &
831	'tart data file differs from the current ', &
832	'run&max_pr_user on file = "', &
833	max_pr_user_on_file, '"', &
834	'&max_pr_user from run = "', &
835	max_pr_user, '"'
836	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
837	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
838	ELSE
839	tmp_mpru = max_pr_user
840	ENDIF
841
842	READ ( 13 ) variable_chr
843	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
844	message_string = 'statistic_regions not found in restart data file'
845	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
846	ENDIF
847	READ ( 13 ) statistic_regions_on_file
848	IF ( statistic_regions_on_file /= statistic_regions ) THEN
849	WRITE( message_string, * ) 'statistic regions on restart data file ',&
850	'differ from the current run', &
851	'&statistic regions on file = "', &
852	statistic_regions_on_file, '"', &
853	'&statistic regions from run = "', &
854	statistic_regions, '"', &
855	'&statistic data may be lost!'
856	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
857	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
858	ELSE
859	tmp_sr = statistic_regions
860	ENDIF
861
862
863	!
864	!-- Now read and check some control parameters and skip the rest
865	WRITE (9,*) 'wpovl: begin reading variables'
866	CALL local_flush( 9 )
867	READ ( 13 ) variable_chr
868
869	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
870
871	SELECT CASE ( TRIM( variable_chr ) )
872
873	CASE ( 'average_count_pr' )
874	READ ( 13 ) average_count_pr
875	IF ( average_count_pr /= 0 ) THEN
876	WRITE( message_string, * ) 'inflow profiles not temporally ', &
877	'averaged. &Averaging will be done now using ', &
878	average_count_pr, ' samples.'
879	CALL message( 'read_parts_of_var_list', 'PA0309', &
880	0, 1, 0, 6, 0 )
881	ENDIF
882
883	CASE ( 'hom' )
884	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
885	0:statistic_regions_on_file) )
886	READ ( 13 ) hom_on_file
887	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
888	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
889	DEALLOCATE( hom_on_file )
890
891	CASE ( 'hom_sum' )
892	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
893	0:statistic_regions_on_file) )
894	READ ( 13 ) hom_sum_on_file
895	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
896	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
897	DEALLOCATE( hom_sum_on_file )
898
899	CASE ( 'nx' )
900	READ ( 13 ) nx_on_file
901
902	CASE ( 'ny' )
903	READ ( 13 ) ny_on_file
904
905
906	CASE DEFAULT
907
908	READ ( 13 ) cdum
909
910	END SELECT
911
912	READ ( 13 ) variable_chr
913
914	ENDDO
915
916	!
917	!-- Calculate the temporal average of vertical profiles, if neccessary
918	IF ( average_count_pr /= 0 ) THEN
919	hom_sum = hom_sum / REAL( average_count_pr )
920	ENDIF
921
922
923	END SUBROUTINE read_parts_of_var_list
924
925
926
927	SUBROUTINE skip_var_list
928
929	!------------------------------------------------------------------------------!
930	! Description:
931	! ------------
932	! Skipping the global control variables from restart-file (binary format)
933	!------------------------------------------------------------------------------!
934
935	IMPLICIT NONE
936
937	CHARACTER (LEN=10) :: version_on_file
938	CHARACTER (LEN=30) :: variable_chr
939
940	CHARACTER (LEN=1) :: cdum
941
942
943	WRITE (9,*) 'skipvl #1'
944	CALL local_flush( 9 )
945	READ ( 13 ) version_on_file
946
947	WRITE (9,*) 'skipvl before variable_chr'
948	CALL local_flush( 9 )
949	READ ( 13 ) variable_chr
950	WRITE (9,*) 'skipvl after variable_chr'
951	CALL local_flush( 9 )
952
953	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
954
955	WRITE (9,*) 'skipvl chr = ', variable_chr
956	CALL local_flush( 9 )
957	READ ( 13 ) cdum
958	READ ( 13 ) variable_chr
959
960	ENDDO
961	WRITE (9,*) 'skipvl last'
962	CALL local_flush( 9 )
963
964
965	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |