Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 1025

Last change on this file since 1025 was 1017, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 32.4 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! ------------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: read_var_list.f90 1017 2012-09-27 11:28:50Z letzel $
11	!
12	! 1015 2012-09-27 09:23:24Z raasch
13	! -adjust_mixing_length
14	!
15	! 1003 2012-09-14 14:35:53Z raasch
16	! -grid_matching
17	!
18	! 1001 2012-09-13 14:08:46Z raasch
19	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
20	! overshoot_limit_, ups_limit_
21	!
22	! 978 2012-08-09 08:28:32Z fricke
23	! -km_damp_max, outflow_damping_width
24	! +pt_damping_factor, pt_damping_width
25	! +z0h_factor
26	!
27	! 940 2012-07-09 14:31:00Z raasch
28	! +neutral
29	!
30	! 927 2012-06-06 19:15:04Z raasch
31	! +masking_method
32	!
33	! 849 2012-03-15 10:35:09Z raasch
34	! first_call_advec_particles renamed first_call_lpm
35	!
36	! 824 2012-02-17 09:09:57Z raasch
37	! +curvature_solution_effects
38	!
39	! 626 2010-12-10 13:04:12Z suehring
40	! idum replaced by cdum in read_parts_of_var_list
41	!
42	! 622 2010-12-10 08:08:13Z raasch
43	! +collective_wait
44	!
45	! 600 2010-11-24 16:10:51Z raasch
46	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
47	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
48	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
49	! in routine skip_var_list (end of this file), variable ldum is replaced
50	! by cdum(LEN=1), because otherwise read errors (too few data on file)
51	! appear due to one of the additional parameters (cycle_mg) which are now
52	! stored on the restart file
53	!
54	! 591 2010-10-28 06:35:52Z helmke
55	! remove print command
56	!
57	! 587 2010-10-27 08:36:51Z helmke
58	! +time_domask
59	!
60	! 580 2010-10-05 13:59:11Z heinze
61	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
62	! ws_vertical_gradient_level to subs_vertical_gradient_level and
63	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
64	!
65	! 411 2009-12-11 14:15:58Z heinze
66	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
67	! ws_vertical_gradient_level_ind
68	!
69	! 345 2009-07-01 14:37:56Z heinze
70	! +output_for_t0
71	! dt_fixed is read into a dummy variable.
72	! Output of messages replaced by message handling routine.
73	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
74	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
75	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
76	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
77	!
78	! 216 2008-11-25 07:12:43Z raasch
79	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
80	!
81	! 173 2008-05-23 20:39:38Z raasch
82	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
83	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
84	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
85	! recycling_width, turbulent_inflow,
86	! -cross_ts_*, npex, npey,
87	! hom_sum, volume_flow_area, volume_flow_initial moved from
88	! read_3d_binary to here,
89	! routines read_parts_of_var_list and skip_var_list added at the end
90	!
91	! 138 2007-11-28 10:03:58Z letzel
92	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
93	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
94	! plant_canopy, time_sort_particles
95	!
96	! 102 2007-07-27 09:09:17Z raasch
97	! +time_coupling, top_momentumflux_u\|v
98	!
99	! 95 2007-06-02 16:48:38Z raasch
100	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
101	! sa_vertical_gradient_level, bottom/top_salinity_flux
102	!
103	! 87 2007-05-22 15:46:47Z raasch
104	! +max_pr_user (version 3.1), var_hom renamed pr_palm
105	!
106	! 75 2007-03-22 09:54:05Z raasch
107	! +loop_optimization, pt_reference, moisture renamed humidity
108	!
109	! 20 2007-02-26 00:12:32Z raasch
110	! +top_heatflux, use_top_fluxes
111	!
112	! RCS Log replace by Id keyword, revision history cleaned up
113	!
114	! Revision 1.34 2006/08/22 14:14:27 raasch
115	! +dz_max
116	!
117	! Revision 1.1 1998/03/18 20:18:48 raasch
118	! Initial revision
119	!
120	!
121	! Description:
122	! ------------
123	! Reading values of global control variables from restart-file (binary format)
124	!------------------------------------------------------------------------------!
125
126	USE arrays_3d
127	USE averaging
128	USE cloud_parameters
129	USE control_parameters
130	USE grid_variables
131	USE indices
132	USE model_1d
133	USE netcdf_control
134	USE particle_attributes
135	USE pegrid
136	USE profil_parameter
137	USE statistics
138
139	IMPLICIT NONE
140
141	CHARACTER (LEN=10) :: binary_version, version_on_file
142	CHARACTER (LEN=30) :: variable_chr
143
144	LOGICAL :: ldum
145
146
147	CALL check_open( 13 )
148
149	!
150	!-- Make version number check first
151	READ ( 13 ) version_on_file
152	binary_version = '3.5'
153	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
154	WRITE( message_string, * ) 'version mismatch concerning control ', &
155	'variables', &
156	'&version on file = "', &
157	TRIM( version_on_file ), '"', &
158	'&version on program = "', &
159	TRIM( binary_version ), '"'
160	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
161	ENDIF
162
163	!
164	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
165	!-- run
166	READ ( 13 ) variable_chr
167	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
168	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
169	'run on PE ', myid
170	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
171	ENDIF
172	READ ( 13 ) numprocs_previous_run
173
174	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
175	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
176	ENDIF
177
178	READ ( 13 ) variable_chr
179	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
180	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
181	'prior run on PE ', myid
182	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
183	ENDIF
184	READ ( 13 ) hor_index_bounds_previous_run
185
186	!
187	!-- Read vertical number of gridpoints and number of different areas used
188	!-- for computing statistics. Allocate arrays depending on these values,
189	!-- which are needed for the following read instructions.
190	READ ( 13 ) variable_chr
191	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
192	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
193	myid
194	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
195	ENDIF
196	READ ( 13 ) nz
197
198	READ ( 13 ) variable_chr
199	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
200	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
201	'prior run on PE ', myid
202	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
203	ENDIF
204	READ ( 13 ) max_pr_user ! This value is checked against the number of
205	! user profiles given for the current run
206	! in routine user_parin (it has to match)
207
208	READ ( 13 ) variable_chr
209	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
210	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
211	'prior run on PE ', myid
212	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
213	ENDIF
214	READ ( 13 ) statistic_regions
215	IF ( .NOT. ALLOCATED( ug ) ) THEN
216	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
217	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
218	sa_init(0:nz+1), &
219	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
220	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
221	ENDIF
222
223	!
224	!-- Now read all control parameters:
225	!-- Caution: When the following read instructions have been changed, the
226	!-- ------- version number stored in the variable binary_version has to be
227	!-- increased. The same changes must also be done in write_var_list.
228	READ ( 13 ) variable_chr
229	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
230
231	SELECT CASE ( TRIM( variable_chr ) )
232
233	CASE ( 'advected_distance_x' )
234	READ ( 13 ) advected_distance_x
235	CASE ( 'advected_distance_y' )
236	READ ( 13 ) advected_distance_y
237	CASE ( 'alpha_surface' )
238	READ ( 13 ) alpha_surface
239	CASE ( 'average_count_pr' )
240	READ ( 13 ) average_count_pr
241	CASE ( 'average_count_sp' )
242	READ ( 13 ) average_count_sp
243	CASE ( 'average_count_3d' )
244	READ ( 13 ) average_count_3d
245	CASE ( 'bc_e_b' )
246	READ ( 13 ) bc_e_b
247	CASE ( 'bc_lr' )
248	READ ( 13 ) bc_lr
249	CASE ( 'bc_ns' )
250	READ ( 13 ) bc_ns
251	CASE ( 'bc_p_b' )
252	READ ( 13 ) bc_p_b
253	CASE ( 'bc_p_t' )
254	READ ( 13 ) bc_p_t
255	CASE ( 'bc_pt_b' )
256	READ ( 13 ) bc_pt_b
257	CASE ( 'bc_pt_t' )
258	READ ( 13 ) bc_pt_t
259	CASE ( 'bc_pt_t_val' )
260	READ ( 13 ) bc_pt_t_val
261	CASE ( 'bc_q_b' )
262	READ ( 13 ) bc_q_b
263	CASE ( 'bc_q_t' )
264	READ ( 13 ) bc_q_t
265	CASE ( 'bc_q_t_val' )
266	READ ( 13 ) bc_q_t_val
267	CASE ( 'bc_s_b' )
268	READ ( 13 ) bc_s_b
269	CASE ( 'bc_s_t' )
270	READ ( 13 ) bc_s_t
271	CASE ( 'bc_sa_t' )
272	READ ( 13 ) bc_sa_t
273	CASE ( 'bc_uv_b' )
274	READ ( 13 ) bc_uv_b
275	CASE ( 'bc_uv_t' )
276	READ ( 13 ) bc_uv_t
277	CASE ( 'bottom_salinityflux' )
278	READ ( 13 ) bottom_salinityflux
279	CASE ( 'building_height' )
280	READ ( 13 ) building_height
281	CASE ( 'building_length_x' )
282	READ ( 13 ) building_length_x
283	CASE ( 'building_length_y' )
284	READ ( 13 ) building_length_y
285	CASE ( 'building_wall_left' )
286	READ ( 13 ) building_wall_left
287	CASE ( 'building_wall_south' )
288	READ ( 13 ) building_wall_south
289	CASE ( 'call_psolver_at_all_substeps' )
290	READ ( 13 ) call_psolver_at_all_substeps
291	CASE ( 'canopy_mode' )
292	READ ( 13 ) canopy_mode
293	CASE ( 'canyon_height' )
294	READ ( 13 ) canyon_height
295	CASE ( 'canyon_width_x' )
296	READ ( 13 ) canyon_width_x
297	CASE ( 'canyon_width_y' )
298	READ ( 13 ) canyon_width_y
299	CASE ( 'canyon_wall_left' )
300	READ ( 13 ) canyon_wall_left
301	CASE ( 'canyon_wall_south' )
302	READ ( 13 ) canyon_wall_south
303	CASE ( 'cfl_factor' )
304	READ ( 13 ) cfl_factor
305	CASE ( 'cloud_droplets' )
306	READ ( 13 ) cloud_droplets
307	CASE ( 'cloud_physics' )
308	READ ( 13 ) cloud_physics
309	CASE ( 'collective_wait' )
310	READ ( 13 ) collective_wait
311	CASE ( 'conserve_volume_flow' )
312	READ ( 13 ) conserve_volume_flow
313	CASE ( 'conserve_volume_flow_mode' )
314	READ ( 13 ) conserve_volume_flow_mode
315	CASE ( 'coupling_start_time' )
316	READ ( 13 ) coupling_start_time
317	CASE ( 'cthf' )
318	READ ( 13 ) cthf
319	CASE ( 'current_timestep_number' )
320	READ ( 13 ) current_timestep_number
321	CASE ( 'curvature_solution_effects' )
322	READ ( 13 ) curvature_solution_effects
323	CASE ( 'cycle_mg' )
324	READ ( 13 ) cycle_mg
325	CASE ( 'damp_level_1d' )
326	READ ( 13 ) damp_level_1d
327	CASE ( 'dissipation_1d' )
328	READ ( 13 ) dissipation_1d
329	CASE ( 'dp_external' )
330	READ ( 13 ) dp_external
331	CASE ( 'dp_level_b' )
332	READ ( 13 ) dp_level_b
333	CASE ( 'dp_smooth' )
334	READ ( 13 ) dp_smooth
335	CASE ( 'dpdxy' )
336	READ ( 13 ) dpdxy
337	CASE ( 'drag_coefficient' )
338	READ ( 13 ) drag_coefficient
339	CASE ( 'dt_pr_1d' )
340	READ ( 13 ) dt_pr_1d
341	CASE ( 'dt_run_control_1d' )
342	READ ( 13 ) dt_run_control_1d
343	CASE ( 'dt_3d' )
344	READ ( 13 ) dt_3d
345	CASE ( 'dvrp_filecount' )
346	READ ( 13 ) dvrp_filecount
347	CASE ( 'dx' )
348	READ ( 13 ) dx
349	CASE ( 'dy' )
350	READ ( 13 ) dy
351	CASE ( 'dz' )
352	READ ( 13 ) dz
353	CASE ( 'dz_max' )
354	READ ( 13 ) dz_max
355	CASE ( 'dz_stretch_factor' )
356	READ ( 13 ) dz_stretch_factor
357	CASE ( 'dz_stretch_level' )
358	READ ( 13 ) dz_stretch_level
359	CASE ( 'e_min' )
360	READ ( 13 ) e_min
361	CASE ( 'end_time_1d' )
362	READ ( 13 ) end_time_1d
363	CASE ( 'fft_method' )
364	READ ( 13 ) fft_method
365	CASE ( 'first_call_lpm' )
366	READ ( 13 ) first_call_lpm
367	CASE ( 'galilei_transformation' )
368	READ ( 13 ) galilei_transformation
369	CASE ( 'hom' )
370	READ ( 13 ) hom
371	CASE ( 'hom_sum' )
372	READ ( 13 ) hom_sum
373	CASE ( 'humidity' )
374	READ ( 13 ) humidity
375	CASE ( 'inflow_damping_factor' )
376	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
377	ALLOCATE( inflow_damping_factor(0:nz+1) )
378	ENDIF
379	READ ( 13 ) inflow_damping_factor
380	CASE ( 'inflow_damping_height' )
381	READ ( 13 ) inflow_damping_height
382	CASE ( 'inflow_damping_width' )
383	READ ( 13 ) inflow_damping_width
384	CASE ( 'inflow_disturbance_begin' )
385	READ ( 13 ) inflow_disturbance_begin
386	CASE ( 'inflow_disturbance_end' )
387	READ ( 13 ) inflow_disturbance_end
388	CASE ( 'km_constant' )
389	READ ( 13 ) km_constant
390	CASE ( 'lad' )
391	READ ( 13 ) lad
392	CASE ( 'lad_surface' )
393	READ ( 13 ) lad_surface
394	CASE ( 'lad_vertical_gradient' )
395	READ ( 13 ) lad_vertical_gradient
396	CASE ( 'lad_vertical_gradient_level' )
397	READ ( 13 ) lad_vertical_gradient_level
398	CASE ( 'lad_vertical_gradient_level_in' )
399	READ ( 13 ) lad_vertical_gradient_level_ind
400	CASE ( 'large_scale_subsidence' )
401	READ ( 13 ) large_scale_subsidence
402	CASE ( 'leaf_surface_concentration' )
403	READ ( 13 ) leaf_surface_concentration
404	CASE ( 'loop_optimization' )
405	READ ( 13 ) loop_optimization
406	CASE ( 'masking_method' )
407	READ ( 13 ) masking_method
408	CASE ( 'mean_inflow_profiles' )
409	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
410	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
411	ENDIF
412	READ ( 13 ) mean_inflow_profiles
413	CASE ( 'mg_cycles' )
414	READ ( 13 ) mg_cycles
415	CASE ( 'mg_switch_to_pe0_level' )
416	READ ( 13 ) mg_switch_to_pe0_level
417	CASE ( 'mixing_length_1d' )
418	READ ( 13 ) mixing_length_1d
419	CASE ( 'momentum_advec' )
420	READ ( 13 ) momentum_advec
421	CASE ( 'netcdf_precision' )
422	READ ( 13 ) netcdf_precision
423	CASE ( 'neutral' )
424	READ ( 13 ) neutral
425	CASE ( 'ngsrb' )
426	READ ( 13 ) ngsrb
427	CASE ( 'nsor' )
428	READ ( 13 ) nsor
429	CASE ( 'nsor_ini' )
430	READ ( 13 ) nsor_ini
431	CASE ( 'nx' )
432	READ ( 13 ) nx
433	nx_on_file = nx
434	CASE ( 'ny' )
435	READ ( 13 ) ny
436	ny_on_file = ny
437	CASE ( 'ocean' )
438	READ ( 13 ) ocean
439	CASE ( 'old_dt' )
440	READ ( 13 ) old_dt
441	CASE ( 'omega' )
442	READ ( 13 ) omega
443	CASE ( 'omega_sor' )
444	READ ( 13 ) omega_sor
445	CASE ( 'output_for_t0' )
446	READ (13) output_for_t0
447	CASE ( 'passive_scalar' )
448	READ ( 13 ) passive_scalar
449	CASE ( 'pch_index' )
450	READ ( 13 ) pch_index
451	CASE ( 'phi' )
452	READ ( 13 ) phi
453	CASE ( 'plant_canopy' )
454	READ ( 13 ) plant_canopy
455	CASE ( 'prandtl_layer' )
456	READ ( 13 ) prandtl_layer
457	CASE ( 'prandtl_number' )
458	READ ( 13 ) prandtl_number
459	CASE ( 'precipitation' )
460	READ ( 13 ) precipitation
461	CASE ( 'psolver' )
462	READ ( 13 ) psolver
463	CASE ( 'pt_damping_factor' )
464	READ ( 13 ) pt_damping_factor
465	CASE ( 'pt_damping_width' )
466	READ ( 13 ) pt_damping_width
467	CASE ( 'pt_init' )
468	READ ( 13 ) pt_init
469	CASE ( 'pt_reference' )
470	READ ( 13 ) pt_reference
471	CASE ( 'pt_surface' )
472	READ ( 13 ) pt_surface
473	CASE ( 'pt_surface_initial_change' )
474	READ ( 13 ) pt_surface_initial_change
475	CASE ( 'pt_vertical_gradient' )
476	READ ( 13 ) pt_vertical_gradient
477	CASE ( 'pt_vertical_gradient_level' )
478	READ ( 13 ) pt_vertical_gradient_level
479	CASE ( 'pt_vertical_gradient_level_ind' )
480	READ ( 13 ) pt_vertical_gradient_level_ind
481	CASE ( 'q_init' )
482	READ ( 13 ) q_init
483	CASE ( 'q_surface' )
484	READ ( 13 ) q_surface
485	CASE ( 'q_surface_initial_change' )
486	READ ( 13 ) q_surface_initial_change
487	CASE ( 'q_vertical_gradient' )
488	READ ( 13 ) q_vertical_gradient
489	CASE ( 'q_vertical_gradient_level' )
490	READ ( 13 ) q_vertical_gradient_level
491	CASE ( 'q_vertical_gradient_level_ind' )
492	READ ( 13 ) q_vertical_gradient_level_ind
493	CASE ( 'radiation' )
494	READ ( 13 ) radiation
495	CASE ( 'random_generator' )
496	READ ( 13 ) random_generator
497	CASE ( 'random_heatflux' )
498	READ ( 13 ) random_heatflux
499	CASE ( 'rayleigh_damping_factor' )
500	READ ( 13 ) rayleigh_damping_factor
501	CASE ( 'rayleigh_damping_height' )
502	READ ( 13 ) rayleigh_damping_height
503	CASE ( 'recycling_width' )
504	READ ( 13 ) recycling_width
505	CASE ( 'residual_limit' )
506	READ ( 13 ) residual_limit
507	CASE ( 'rif_max' )
508	READ ( 13 ) rif_max
509	CASE ( 'rif_min' )
510	READ ( 13 ) rif_min
511	CASE ( 'roughness_length' )
512	READ ( 13 ) roughness_length
513	CASE ( 'runnr' )
514	READ ( 13 ) runnr
515	CASE ( 'run_coupled' )
516	READ ( 13 ) run_coupled
517	CASE ( 'sa_init' )
518	READ ( 13 ) sa_init
519	CASE ( 'sa_surface' )
520	READ ( 13 ) sa_surface
521	CASE ( 'sa_vertical_gradient' )
522	READ ( 13 ) sa_vertical_gradient
523	CASE ( 'sa_vertical_gradient_level' )
524	READ ( 13 ) sa_vertical_gradient_level
525	CASE ( 'scalar_advec' )
526	READ ( 13 ) scalar_advec
527	CASE ( 'scalar_exchange_coefficient' )
528	READ ( 13 ) scalar_exchange_coefficient
529	CASE ( 'simulated_time' )
530	READ ( 13 ) simulated_time
531	CASE ( 'surface_heatflux' )
532	READ ( 13 ) surface_heatflux
533	CASE ( 'surface_pressure' )
534	READ ( 13 ) surface_pressure
535	CASE ( 'surface_scalarflux' )
536	READ ( 13 ) surface_scalarflux
537	CASE ( 'surface_waterflux' )
538	READ ( 13 ) surface_waterflux
539	CASE ( 's_surface' )
540	READ ( 13 ) s_surface
541	CASE ( 's_surface_initial_change' )
542	READ ( 13 ) s_surface_initial_change
543	CASE ( 's_vertical_gradient' )
544	READ ( 13 ) s_vertical_gradient
545	CASE ( 's_vertical_gradient_level' )
546	READ ( 13 ) s_vertical_gradient_level
547	CASE ( 'time_coupling' )
548	READ ( 13 ) time_coupling
549	CASE ( 'time_disturb' )
550	READ ( 13 ) time_disturb
551	CASE ( 'time_dopr' )
552	READ ( 13 ) time_dopr
553	CASE ( 'time_domask' )
554	READ ( 13 ) time_domask
555	CASE ( 'time_dopr_av' )
556	READ ( 13 ) time_dopr_av
557	CASE ( 'time_dopr_listing' )
558	READ ( 13 ) time_dopr_listing
559	CASE ( 'time_dopts' )
560	READ ( 13 ) time_dopts
561	CASE ( 'time_dosp' )
562	READ ( 13 ) time_dosp
563	CASE ( 'time_dots' )
564	READ ( 13 ) time_dots
565	CASE ( 'time_do2d_xy' )
566	READ ( 13 ) time_do2d_xy
567	CASE ( 'time_do2d_xz' )
568	READ ( 13 ) time_do2d_xz
569	CASE ( 'time_do2d_yz' )
570	READ ( 13 ) time_do2d_yz
571	CASE ( 'time_do3d' )
572	READ ( 13 ) time_do3d
573	CASE ( 'time_do_av' )
574	READ ( 13 ) time_do_av
575	CASE ( 'time_do_sla' )
576	READ ( 13 ) time_do_sla
577	CASE ( 'time_dvrp' )
578	READ ( 13 ) time_dvrp
579	CASE ( 'time_restart' )
580	READ ( 13 ) time_restart
581	CASE ( 'time_run_control' )
582	READ ( 13 ) time_run_control
583	CASE ( 'time_since_reference_point' )
584	READ ( 13 ) time_since_reference_point
585	CASE ( 'time_sort_particles' )
586	READ ( 13 ) time_sort_particles
587	CASE ( 'timestep_scheme' )
588	READ ( 13 ) timestep_scheme
589	CASE ( 'topography' )
590	READ ( 13 ) topography
591	CASE ( 'topography_grid_convention' )
592	READ ( 13 ) topography_grid_convention
593	CASE ( 'top_heatflux' )
594	READ ( 13 ) top_heatflux
595	CASE ( 'top_momentumflux_u' )
596	READ ( 13 ) top_momentumflux_u
597	CASE ( 'top_momentumflux_v' )
598	READ ( 13 ) top_momentumflux_v
599	CASE ( 'top_salinityflux' )
600	READ ( 13 ) top_salinityflux
601	CASE ( 'tsc' )
602	READ ( 13 ) tsc
603	CASE ( 'turbulent_inflow' )
604	READ ( 13 ) turbulent_inflow
605	CASE ( 'u_bulk' )
606	READ ( 13 ) u_bulk
607	CASE ( 'u_init' )
608	READ ( 13 ) u_init
609	CASE ( 'u_max' )
610	READ ( 13 ) u_max
611	CASE ( 'u_max_ijk' )
612	READ ( 13 ) u_max_ijk
613	CASE ( 'ug' )
614	READ ( 13 ) ug
615	CASE ( 'ug_surface' )
616	READ ( 13 ) ug_surface
617	CASE ( 'ug_vertical_gradient' )
618	READ ( 13 ) ug_vertical_gradient
619	CASE ( 'ug_vertical_gradient_level' )
620	READ ( 13 ) ug_vertical_gradient_level
621	CASE ( 'ug_vertical_gradient_level_ind' )
622	READ ( 13 ) ug_vertical_gradient_level_ind
623	CASE ( 'use_surface_fluxes' )
624	READ ( 13 ) use_surface_fluxes
625	CASE ( 'use_top_fluxes' )
626	READ ( 13 ) use_top_fluxes
627	CASE ( 'use_ug_for_galilei_tr' )
628	READ ( 13 ) use_ug_for_galilei_tr
629	CASE ( 'use_upstream_for_tke' )
630	READ ( 13 ) use_upstream_for_tke
631	CASE ( 'v_bulk' )
632	READ ( 13 ) v_bulk
633	CASE ( 'v_init' )
634	READ ( 13 ) v_init
635	CASE ( 'v_max' )
636	READ ( 13 ) v_max
637	CASE ( 'v_max_ijk' )
638	READ ( 13 ) v_max_ijk
639	CASE ( 'vg' )
640	READ ( 13 ) vg
641	CASE ( 'vg_surface' )
642	READ ( 13 ) vg_surface
643	CASE ( 'vg_vertical_gradient' )
644	READ ( 13 ) vg_vertical_gradient
645	CASE ( 'vg_vertical_gradient_level' )
646	READ ( 13 ) vg_vertical_gradient_level
647	CASE ( 'vg_vertical_gradient_level_ind' )
648	READ ( 13 ) vg_vertical_gradient_level_ind
649	CASE ( 'volume_flow_area' )
650	READ ( 13 ) volume_flow_area
651	CASE ( 'volume_flow_initial' )
652	READ ( 13 ) volume_flow_initial
653	CASE ( 'wall_adjustment' )
654	READ ( 13 ) wall_adjustment
655	CASE ( 'subs_vertical_gradient' )
656	READ ( 13 ) subs_vertical_gradient
657	CASE ( 'subs_vertical_gradient_level' )
658	READ ( 13 ) subs_vertical_gradient_level
659	CASE ( 'subs_vertical_gradient_level_i' )
660	READ ( 13 ) subs_vertical_gradient_level_i
661	CASE ( 'w_max' )
662	READ ( 13 ) w_max
663	CASE ( 'w_max_ijk' )
664	READ ( 13 ) w_max_ijk
665	CASE ( 'z0h_factor' )
666	READ ( 13 ) z0h_factor
667
668	CASE DEFAULT
669	WRITE( message_string, * ) 'unknown variable named "', &
670	TRIM( variable_chr ), '" found in', &
671	' data from prior run on PE ', myid
672	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
673	END SELECT
674	!
675	!-- Read next string
676	READ ( 13 ) variable_chr
677
678	ENDDO
679
680
681	END SUBROUTINE read_var_list
682
683
684
685	SUBROUTINE read_parts_of_var_list
686
687	!------------------------------------------------------------------------------!
688	! Description:
689	! ------------
690	! Skipping the global control variables from restart-file (binary format)
691	! except some informations needed when reading restart data from a previous
692	! run which used a smaller total domain or/and a different domain decomposition.
693	!------------------------------------------------------------------------------!
694
695	USE arrays_3d
696	USE control_parameters
697	USE indices
698	USE pegrid
699	USE statistics
700
701	IMPLICIT NONE
702
703	CHARACTER (LEN=10) :: version_on_file
704	CHARACTER (LEN=30) :: variable_chr
705	CHARACTER (LEN=1) :: cdum
706
707	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
708	statistic_regions_on_file, tmp_mpru, tmp_sr
709
710	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
711	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
712
713
714	CALL check_open( 13 )
715
716	WRITE (9,*) 'rpovl: after check open 13'
717	CALL local_flush( 9 )
718	READ ( 13 ) version_on_file
719
720	!
721	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
722	!-- run
723	READ ( 13 ) variable_chr
724	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
725	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
726	'run on PE ', myid
727	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
728	ENDIF
729	READ ( 13 ) numprocs_previous_run
730
731	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
732	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
733	ENDIF
734
735	READ ( 13 ) variable_chr
736	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
737	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
738	'prior run on PE ', myid
739	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
740	ENDIF
741	READ ( 13 ) hor_index_bounds_previous_run
742
743	!
744	!-- Read vertical number of gridpoints and number of different areas used
745	!-- for computing statistics. Allocate arrays depending on these values,
746	!-- which are needed for the following read instructions.
747	READ ( 13 ) variable_chr
748	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
749	message_string = 'nz not found in restart data file'
750	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
751	ENDIF
752	READ ( 13 ) nz_on_file
753	IF ( nz_on_file /= nz ) THEN
754	WRITE( message_string, * ) 'mismatch concerning number of ', &
755	'gridpoints along z', &
756	'&nz on file = "', nz_on_file, '"', &
757	'&nz from run = "', nz, '"'
758	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
759	ENDIF
760
761	READ ( 13 ) variable_chr
762	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
763	message_string = 'max_pr_user not found in restart data file'
764	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
765	ENDIF
766	READ ( 13 ) max_pr_user_on_file
767	IF ( max_pr_user_on_file /= max_pr_user ) THEN
768	WRITE( message_string, * ) 'number of user profiles on res', &
769	'tart data file differs from the current ', &
770	'run&max_pr_user on file = "', &
771	max_pr_user_on_file, '"', &
772	'&max_pr_user from run = "', &
773	max_pr_user, '"'
774	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
775	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
776	ELSE
777	tmp_mpru = max_pr_user
778	ENDIF
779
780	READ ( 13 ) variable_chr
781	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
782	message_string = 'statistic_regions not found in restart data file'
783	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
784	ENDIF
785	READ ( 13 ) statistic_regions_on_file
786	IF ( statistic_regions_on_file /= statistic_regions ) THEN
787	WRITE( message_string, * ) 'statistic regions on restart data file ',&
788	'differ from the current run', &
789	'&statistic regions on file = "', &
790	statistic_regions_on_file, '"', &
791	'&statistic regions from run = "', &
792	statistic_regions, '"', &
793	'&statistic data may be lost!'
794	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
795	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
796	ELSE
797	tmp_sr = statistic_regions
798	ENDIF
799
800
801	!
802	!-- Now read and check some control parameters and skip the rest
803	WRITE (9,*) 'wpovl: begin reading variables'
804	CALL local_flush( 9 )
805	READ ( 13 ) variable_chr
806
807	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
808
809	SELECT CASE ( TRIM( variable_chr ) )
810
811	CASE ( 'average_count_pr' )
812	READ ( 13 ) average_count_pr
813	IF ( average_count_pr /= 0 ) THEN
814	WRITE( message_string, * ) 'inflow profiles not temporally ', &
815	'averaged. &Averaging will be done now using ', &
816	average_count_pr, ' samples.'
817	CALL message( 'read_parts_of_var_list', 'PA0309', &
818	0, 1, 0, 6, 0 )
819	ENDIF
820
821	CASE ( 'hom' )
822	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
823	0:statistic_regions_on_file) )
824	READ ( 13 ) hom_on_file
825	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
826	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
827	DEALLOCATE( hom_on_file )
828
829	CASE ( 'hom_sum' )
830	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
831	0:statistic_regions_on_file) )
832	READ ( 13 ) hom_sum_on_file
833	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
834	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
835	DEALLOCATE( hom_sum_on_file )
836
837	CASE ( 'nx' )
838	READ ( 13 ) nx_on_file
839
840	CASE ( 'ny' )
841	READ ( 13 ) ny_on_file
842
843
844	CASE DEFAULT
845
846	READ ( 13 ) cdum
847
848	END SELECT
849
850	READ ( 13 ) variable_chr
851
852	ENDDO
853
854	!
855	!-- Calculate the temporal average of vertical profiles, if neccessary
856	IF ( average_count_pr /= 0 ) THEN
857	hom_sum = hom_sum / REAL( average_count_pr )
858	ENDIF
859
860
861	END SUBROUTINE read_parts_of_var_list
862
863
864
865	SUBROUTINE skip_var_list
866
867	!------------------------------------------------------------------------------!
868	! Description:
869	! ------------
870	! Skipping the global control variables from restart-file (binary format)
871	!------------------------------------------------------------------------------!
872
873	IMPLICIT NONE
874
875	CHARACTER (LEN=10) :: version_on_file
876	CHARACTER (LEN=30) :: variable_chr
877
878	CHARACTER (LEN=1) :: cdum
879
880
881	WRITE (9,*) 'skipvl #1'
882	CALL local_flush( 9 )
883	READ ( 13 ) version_on_file
884
885	WRITE (9,*) 'skipvl before variable_chr'
886	CALL local_flush( 9 )
887	READ ( 13 ) variable_chr
888	WRITE (9,*) 'skipvl after variable_chr'
889	CALL local_flush( 9 )
890
891	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
892
893	WRITE (9,*) 'skipvl chr = ', variable_chr
894	CALL local_flush( 9 )
895	READ ( 13 ) cdum
896	READ ( 13 ) variable_chr
897
898	ENDDO
899	WRITE (9,*) 'skipvl last'
900	CALL local_flush( 9 )
901
902
903	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |