Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 888

Last change on this file since 888 was 850, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.3 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[622]	5	! ------------------
[850]	6	!
[601]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: read_var_list.f90 850 2012-03-15 12:09:25Z suehring $
	11	!
[850]	12	! 849 2012-03-15 10:35:09Z raasch
	13	! first_call_advec_particles renamed first_call_lpm
	14	!
[826]	15	! 824 2012-02-17 09:09:57Z raasch
	16	! +curvature_solution_effects
	17	!
[627]	18	! 626 2010-12-10 13:04:12Z suehring
	19	! idum replaced by cdum in read_parts_of_var_list
	20	!
[623]	21	! 622 2010-12-10 08:08:13Z raasch
	22	! +collective_wait
	23	!
[601]	24	! 600 2010-11-24 16:10:51Z raasch
[600]	25	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
	26	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
	27	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
	28	! in routine skip_var_list (end of this file), variable ldum is replaced
	29	! by cdum(LEN=1), because otherwise read errors (too few data on file)
	30	! appear due to one of the additional parameters (cycle_mg) which are now
	31	! stored on the restart file
[392]	32	!
[592]	33	! 591 2010-10-28 06:35:52Z helmke
	34	! remove print command
	35	!
[588]	36	! 587 2010-10-27 08:36:51Z helmke
	37	! +time_domask
	38	!
[581]	39	! 580 2010-10-05 13:59:11Z heinze
	40	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	41	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	42	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	43	!
[482]	44	! 411 2009-12-11 14:15:58Z heinze
	45	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	46	! ws_vertical_gradient_level_ind
	47	!
[392]	48	! 345 2009-07-01 14:37:56Z heinze
[345]	49	! +output_for_t0
[336]	50	! dt_fixed is read into a dummy variable.
[257]	51	! Output of messages replaced by message handling routine.
[240]	52	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	53	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	54	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	55	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	56	!
[226]	57	! 216 2008-11-25 07:12:43Z raasch
	58	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	59	!
[198]	60	! 173 2008-05-23 20:39:38Z raasch
[153]	61	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	62	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	63	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	64	! recycling_width, turbulent_inflow,
[145]	65	! -cross_ts_*, npex, npey,
	66	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	67	! read_3d_binary to here,
[147]	68	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	69	!
[139]	70	! 138 2007-11-28 10:03:58Z letzel
	71	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	72	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	73	! plant_canopy, time_sort_particles
	74	!
[110]	75	! 102 2007-07-27 09:09:17Z raasch
	76	! +time_coupling, top_momentumflux_u\|v
	77	!
[98]	78	! 95 2007-06-02 16:48:38Z raasch
	79	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	80	! sa_vertical_gradient_level, bottom/top_salinity_flux
	81	!
[90]	82	! 87 2007-05-22 15:46:47Z raasch
	83	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	84	!
[77]	85	! 75 2007-03-22 09:54:05Z raasch
	86	! +loop_optimization, pt_reference, moisture renamed humidity
	87	!
[39]	88	! 20 2007-02-26 00:12:32Z raasch
	89	! +top_heatflux, use_top_fluxes
	90	!
[3]	91	! RCS Log replace by Id keyword, revision history cleaned up
	92	!
[1]	93	! Revision 1.34 2006/08/22 14:14:27 raasch
	94	! +dz_max
	95	!
	96	! Revision 1.1 1998/03/18 20:18:48 raasch
	97	! Initial revision
	98	!
	99	!
	100	! Description:
	101	! ------------
[143]	102	! Reading values of global control variables from restart-file (binary format)
[1]	103	!------------------------------------------------------------------------------!
	104
	105	USE arrays_3d
	106	USE averaging
[824]	107	USE cloud_parameters
[87]	108	USE control_parameters
[1]	109	USE grid_variables
	110	USE indices
	111	USE model_1d
[345]	112	USE netcdf_control
[116]	113	USE particle_attributes
[1]	114	USE pegrid
	115	USE profil_parameter
	116	USE statistics
	117
	118	IMPLICIT NONE
	119
	120	CHARACTER (LEN=10) :: binary_version, version_on_file
	121	CHARACTER (LEN=30) :: variable_chr
[87]	122
[336]	123	LOGICAL :: ldum
[143]	124
[336]	125
[1]	126	CALL check_open( 13 )
	127
	128	!
	129	!-- Make version number check first
	130	READ ( 13 ) version_on_file
[600]	131	binary_version = '3.5'
[1]	132	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	133	WRITE( message_string, * ) 'version mismatch concerning control ', &
	134	'variables', &
	135	'&version on file = "', &
	136	TRIM( version_on_file ), '"', &
	137	'&version on program = "', &
	138	TRIM( binary_version ), '"'
	139	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	140	ENDIF
	141
	142	!
[145]	143	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	144	!-- run
	145	READ ( 13 ) variable_chr
	146	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	147	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	148	'run on PE ', myid
[257]	149	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	150	ENDIF
	151	READ ( 13 ) numprocs_previous_run
	152
[146]	153	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	154	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	155	ENDIF
[145]	156
	157	READ ( 13 ) variable_chr
	158	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	159	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	160	'prior run on PE ', myid
	161	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	162	ENDIF
	163	READ ( 13 ) hor_index_bounds_previous_run
	164
	165	!
[1]	166	!-- Read vertical number of gridpoints and number of different areas used
	167	!-- for computing statistics. Allocate arrays depending on these values,
	168	!-- which are needed for the following read instructions.
	169	READ ( 13 ) variable_chr
	170	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	171	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	172	myid
	173	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	174	ENDIF
	175	READ ( 13 ) nz
[87]	176
[1]	177	READ ( 13 ) variable_chr
[87]	178	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	179	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	180	'prior run on PE ', myid
[257]	181	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	182	ENDIF
[159]	183	READ ( 13 ) max_pr_user ! This value is checked against the number of
	184	! user profiles given for the current run
	185	! in routine user_parin (it has to match)
[87]	186
	187	READ ( 13 ) variable_chr
[1]	188	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	189	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	190	'prior run on PE ', myid
[257]	191	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	192	ENDIF
	193	READ ( 13 ) statistic_regions
[146]	194	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	195	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	196	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	197	sa_init(0:nz+1), &
[146]	198	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	199	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	200	ENDIF
[1]	201
	202	!
	203	!-- Now read all control parameters:
	204	!-- Caution: When the following read instructions have been changed, the
	205	!-- ------- version number stored in the variable binary_version has to be
	206	!-- increased. The same changes must also be done in write_var_list.
	207	READ ( 13 ) variable_chr
	208	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	209
	210	SELECT CASE ( TRIM( variable_chr ) )
	211
	212	CASE ( 'adjust_mixing_length' )
	213	READ ( 13 ) adjust_mixing_length
	214	CASE ( 'advected_distance_x' )
	215	READ ( 13 ) advected_distance_x
	216	CASE ( 'advected_distance_y' )
	217	READ ( 13 ) advected_distance_y
	218	CASE ( 'alpha_surface' )
	219	READ ( 13 ) alpha_surface
	220	CASE ( 'average_count_pr' )
	221	READ ( 13 ) average_count_pr
	222	CASE ( 'average_count_sp' )
	223	READ ( 13 ) average_count_sp
	224	CASE ( 'average_count_3d' )
	225	READ ( 13 ) average_count_3d
	226	CASE ( 'bc_e_b' )
	227	READ ( 13 ) bc_e_b
	228	CASE ( 'bc_lr' )
	229	READ ( 13 ) bc_lr
	230	CASE ( 'bc_ns' )
	231	READ ( 13 ) bc_ns
	232	CASE ( 'bc_p_b' )
	233	READ ( 13 ) bc_p_b
	234	CASE ( 'bc_p_t' )
	235	READ ( 13 ) bc_p_t
	236	CASE ( 'bc_pt_b' )
	237	READ ( 13 ) bc_pt_b
	238	CASE ( 'bc_pt_t' )
	239	READ ( 13 ) bc_pt_t
	240	CASE ( 'bc_pt_t_val' )
	241	READ ( 13 ) bc_pt_t_val
	242	CASE ( 'bc_q_b' )
	243	READ ( 13 ) bc_q_b
	244	CASE ( 'bc_q_t' )
	245	READ ( 13 ) bc_q_t
	246	CASE ( 'bc_q_t_val' )
	247	READ ( 13 ) bc_q_t_val
	248	CASE ( 'bc_s_b' )
	249	READ ( 13 ) bc_s_b
	250	CASE ( 'bc_s_t' )
	251	READ ( 13 ) bc_s_t
[95]	252	CASE ( 'bc_sa_t' )
	253	READ ( 13 ) bc_sa_t
[1]	254	CASE ( 'bc_uv_b' )
	255	READ ( 13 ) bc_uv_b
	256	CASE ( 'bc_uv_t' )
	257	READ ( 13 ) bc_uv_t
[95]	258	CASE ( 'bottom_salinityflux' )
	259	READ ( 13 ) bottom_salinityflux
[1]	260	CASE ( 'building_height' )
	261	READ ( 13 ) building_height
	262	CASE ( 'building_length_x' )
	263	READ ( 13 ) building_length_x
	264	CASE ( 'building_length_y' )
	265	READ ( 13 ) building_length_y
	266	CASE ( 'building_wall_left' )
	267	READ ( 13 ) building_wall_left
	268	CASE ( 'building_wall_south' )
	269	READ ( 13 ) building_wall_south
[600]	270	CASE ( 'call_psolver_at_all_substeps' )
	271	READ ( 13 ) call_psolver_at_all_substeps
[138]	272	CASE ( 'canopy_mode' )
	273	READ ( 13 ) canopy_mode
[240]	274	CASE ( 'canyon_height' )
	275	READ ( 13 ) canyon_height
	276	CASE ( 'canyon_width_x' )
	277	READ ( 13 ) canyon_width_x
	278	CASE ( 'canyon_width_y' )
	279	READ ( 13 ) canyon_width_y
	280	CASE ( 'canyon_wall_left' )
	281	READ ( 13 ) canyon_wall_left
	282	CASE ( 'canyon_wall_south' )
	283	READ ( 13 ) canyon_wall_south
[600]	284	CASE ( 'cfl_factor' )
	285	READ ( 13 ) cfl_factor
[1]	286	CASE ( 'cloud_droplets' )
	287	READ ( 13 ) cloud_droplets
	288	CASE ( 'cloud_physics' )
	289	READ ( 13 ) cloud_physics
[622]	290	CASE ( 'collective_wait' )
	291	READ ( 13 ) collective_wait
[1]	292	CASE ( 'conserve_volume_flow' )
	293	READ ( 13 ) conserve_volume_flow
[241]	294	CASE ( 'conserve_volume_flow_mode' )
	295	READ ( 13 ) conserve_volume_flow_mode
[291]	296	CASE ( 'coupling_start_time' )
	297	READ ( 13 ) coupling_start_time
[153]	298	CASE ( 'cthf' )
	299	READ ( 13 ) cthf
[1]	300	CASE ( 'current_timestep_number' )
	301	READ ( 13 ) current_timestep_number
[824]	302	CASE ( 'curvature_solution_effects' )
	303	READ ( 13 ) curvature_solution_effects
[1]	304	CASE ( 'cut_spline_overshoot' )
	305	READ ( 13 ) cut_spline_overshoot
[600]	306	CASE ( 'cycle_mg' )
	307	READ ( 13 ) cycle_mg
[1]	308	CASE ( 'damp_level_1d' )
	309	READ ( 13 ) damp_level_1d
	310	CASE ( 'dissipation_1d' )
	311	READ ( 13 ) dissipation_1d
[240]	312	CASE ( 'dp_external' )
	313	READ ( 13 ) dp_external
	314	CASE ( 'dp_level_b' )
	315	READ ( 13 ) dp_level_b
	316	CASE ( 'dp_smooth' )
	317	READ ( 13 ) dp_smooth
	318	CASE ( 'dpdxy' )
	319	READ ( 13 ) dpdxy
[138]	320	CASE ( 'drag_coefficient' )
	321	READ ( 13 ) drag_coefficient
[1]	322	CASE ( 'dt_fixed' )
[336]	323	READ ( 13 ) ldum ! restart files created before rev 333
	324	! contained dt_fixed by mistake; it is still
	325	! read here in order to allow usage of these
	326	! older restart files; can be removed in a
	327	! later version
[1]	328	CASE ( 'dt_pr_1d' )
	329	READ ( 13 ) dt_pr_1d
	330	CASE ( 'dt_run_control_1d' )
	331	READ ( 13 ) dt_run_control_1d
	332	CASE ( 'dt_3d' )
	333	READ ( 13 ) dt_3d
	334	CASE ( 'dvrp_filecount' )
	335	READ ( 13 ) dvrp_filecount
	336	CASE ( 'dx' )
	337	READ ( 13 ) dx
	338	CASE ( 'dy' )
	339	READ ( 13 ) dy
	340	CASE ( 'dz' )
	341	READ ( 13 ) dz
	342	CASE ( 'dz_max' )
	343	READ ( 13 ) dz_max
	344	CASE ( 'dz_stretch_factor' )
	345	READ ( 13 ) dz_stretch_factor
	346	CASE ( 'dz_stretch_level' )
	347	READ ( 13 ) dz_stretch_level
	348	CASE ( 'e_min' )
	349	READ ( 13 ) e_min
	350	CASE ( 'end_time_1d' )
	351	READ ( 13 ) end_time_1d
	352	CASE ( 'fft_method' )
	353	READ ( 13 ) fft_method
[849]	354	CASE ( 'first_call_lpm' )
	355	READ ( 13 ) first_call_lpm
[1]	356	CASE ( 'galilei_transformation' )
	357	READ ( 13 ) galilei_transformation
	358	CASE ( 'grid_matching' )
	359	READ ( 13 ) grid_matching
	360	CASE ( 'hom' )
	361	READ ( 13 ) hom
[143]	362	CASE ( 'hom_sum' )
	363	READ ( 13 ) hom_sum
[151]	364	CASE ( 'humidity' )
	365	READ ( 13 ) humidity
	366	CASE ( 'inflow_damping_factor' )
	367	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	368	ALLOCATE( inflow_damping_factor(0:nz+1) )
	369	ENDIF
	370	READ ( 13 ) inflow_damping_factor
	371	CASE ( 'inflow_damping_height' )
	372	READ ( 13 ) inflow_damping_height
	373	CASE ( 'inflow_damping_width' )
	374	READ ( 13 ) inflow_damping_width
[1]	375	CASE ( 'inflow_disturbance_begin' )
	376	READ ( 13 ) inflow_disturbance_begin
	377	CASE ( 'inflow_disturbance_end' )
	378	READ ( 13 ) inflow_disturbance_end
	379	CASE ( 'km_constant' )
	380	READ ( 13 ) km_constant
	381	CASE ( 'km_damp_max' )
	382	READ ( 13 ) km_damp_max
[138]	383	CASE ( 'lad' )
	384	READ ( 13 ) lad
	385	CASE ( 'lad_surface' )
	386	READ ( 13 ) lad_surface
	387	CASE ( 'lad_vertical_gradient' )
	388	READ ( 13 ) lad_vertical_gradient
	389	CASE ( 'lad_vertical_gradient_level' )
	390	READ ( 13 ) lad_vertical_gradient_level
	391	CASE ( 'lad_vertical_gradient_level_in' )
	392	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	393	CASE ( 'last_dt_change' )
	394	READ ( 13 ) last_dt_change
[411]	395	CASE ( 'large_scale_subsidence' )
	396	READ ( 13 ) large_scale_subsidence
[153]	397	CASE ( 'leaf_surface_concentration' )
	398	READ ( 13 ) leaf_surface_concentration
[1]	399	CASE ( 'long_filter_factor' )
	400	READ ( 13 ) long_filter_factor
[63]	401	CASE ( 'loop_optimization' )
	402	READ ( 13 ) loop_optimization
[151]	403	CASE ( 'mean_inflow_profiles' )
	404	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	405	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	406	ENDIF
	407	READ ( 13 ) mean_inflow_profiles
[600]	408	CASE ( 'mg_cycles' )
	409	READ ( 13 ) mg_cycles
	410	CASE ( 'mg_switch_to_pe0_level' )
	411	READ ( 13 ) mg_switch_to_pe0_level
[1]	412	CASE ( 'mixing_length_1d' )
	413	READ ( 13 ) mixing_length_1d
	414	CASE ( 'momentum_advec' )
	415	READ ( 13 ) momentum_advec
	416	CASE ( 'netcdf_precision' )
	417	READ ( 13 ) netcdf_precision
[600]	418	CASE ( 'ngsrb' )
	419	READ ( 13 ) ngsrb
	420	CASE ( 'nsor' )
	421	READ ( 13 ) nsor
[1]	422	CASE ( 'nsor_ini' )
	423	READ ( 13 ) nsor_ini
	424	CASE ( 'nx' )
	425	READ ( 13 ) nx
[147]	426	nx_on_file = nx
[1]	427	CASE ( 'ny' )
	428	READ ( 13 ) ny
[147]	429	ny_on_file = ny
[94]	430	CASE ( 'ocean' )
	431	READ ( 13 ) ocean
[1]	432	CASE ( 'old_dt' )
	433	READ ( 13 ) old_dt
	434	CASE ( 'omega' )
	435	READ ( 13 ) omega
[600]	436	CASE ( 'omega_sor' )
	437	READ ( 13 ) omega_sor
[1]	438	CASE ( 'outflow_damping_width' )
	439	READ ( 13 ) outflow_damping_width
[345]	440	CASE ( 'output_for_t0' )
	441	READ (13) output_for_t0
[1]	442	CASE ( 'overshoot_limit_e' )
	443	READ ( 13 ) overshoot_limit_e
	444	CASE ( 'overshoot_limit_pt' )
	445	READ ( 13 ) overshoot_limit_pt
	446	CASE ( 'overshoot_limit_u' )
	447	READ ( 13 ) overshoot_limit_u
	448	CASE ( 'overshoot_limit_v' )
	449	READ ( 13 ) overshoot_limit_v
	450	CASE ( 'overshoot_limit_w' )
	451	READ ( 13 ) overshoot_limit_w
	452	CASE ( 'passive_scalar' )
	453	READ ( 13 ) passive_scalar
[138]	454	CASE ( 'pch_index' )
	455	READ ( 13 ) pch_index
[1]	456	CASE ( 'phi' )
	457	READ ( 13 ) phi
[138]	458	CASE ( 'plant_canopy' )
	459	READ ( 13 ) plant_canopy
[1]	460	CASE ( 'prandtl_layer' )
	461	READ ( 13 ) prandtl_layer
[600]	462	CASE ( 'prandtl_number' )
	463	READ ( 13 ) prandtl_number
[1]	464	CASE ( 'precipitation' )
	465	READ ( 13 ) precipitation
[600]	466	CASE ( 'psolver' )
	467	READ ( 13 ) psolver
[1]	468	CASE ( 'pt_init' )
	469	READ ( 13 ) pt_init
[57]	470	CASE ( 'pt_reference' )
	471	READ ( 13 ) pt_reference
[1]	472	CASE ( 'pt_surface' )
	473	READ ( 13 ) pt_surface
	474	CASE ( 'pt_surface_initial_change' )
	475	READ ( 13 ) pt_surface_initial_change
	476	CASE ( 'pt_vertical_gradient' )
	477	READ ( 13 ) pt_vertical_gradient
	478	CASE ( 'pt_vertical_gradient_level' )
	479	READ ( 13 ) pt_vertical_gradient_level
	480	CASE ( 'pt_vertical_gradient_level_ind' )
	481	READ ( 13 ) pt_vertical_gradient_level_ind
	482	CASE ( 'q_init' )
	483	READ ( 13 ) q_init
	484	CASE ( 'q_surface' )
	485	READ ( 13 ) q_surface
	486	CASE ( 'q_surface_initial_change' )
	487	READ ( 13 ) q_surface_initial_change
	488	CASE ( 'q_vertical_gradient' )
	489	READ ( 13 ) q_vertical_gradient
	490	CASE ( 'q_vertical_gradient_level' )
	491	READ ( 13 ) q_vertical_gradient_level
	492	CASE ( 'q_vertical_gradient_level_ind' )
	493	READ ( 13 ) q_vertical_gradient_level_ind
	494	CASE ( 'radiation' )
	495	READ ( 13 ) radiation
	496	CASE ( 'random_generator' )
	497	READ ( 13 ) random_generator
	498	CASE ( 'random_heatflux' )
	499	READ ( 13 ) random_heatflux
[600]	500	CASE ( 'rayleigh_damping_factor' )
	501	READ ( 13 ) rayleigh_damping_factor
	502	CASE ( 'rayleigh_damping_height' )
	503	READ ( 13 ) rayleigh_damping_height
[151]	504	CASE ( 'recycling_width' )
	505	READ ( 13 ) recycling_width
[600]	506	CASE ( 'residual_limit' )
	507	READ ( 13 ) residual_limit
[1]	508	CASE ( 'rif_max' )
	509	READ ( 13 ) rif_max
	510	CASE ( 'rif_min' )
	511	READ ( 13 ) rif_min
	512	CASE ( 'roughness_length' )
	513	READ ( 13 ) roughness_length
	514	CASE ( 'runnr' )
	515	READ ( 13 ) runnr
[291]	516	CASE ( 'run_coupled' )
	517	READ ( 13 ) run_coupled
[94]	518	CASE ( 'sa_init' )
	519	READ ( 13 ) sa_init
	520	CASE ( 'sa_surface' )
	521	READ ( 13 ) sa_surface
	522	CASE ( 'sa_vertical_gradient' )
	523	READ ( 13 ) sa_vertical_gradient
	524	CASE ( 'sa_vertical_gradient_level' )
	525	READ ( 13 ) sa_vertical_gradient_level
[1]	526	CASE ( 'scalar_advec' )
	527	READ ( 13 ) scalar_advec
[153]	528	CASE ( 'scalar_exchange_coefficient' )
	529	READ ( 13 ) scalar_exchange_coefficient
[1]	530	CASE ( 'simulated_time' )
	531	READ ( 13 ) simulated_time
	532	CASE ( 'surface_heatflux' )
	533	READ ( 13 ) surface_heatflux
	534	CASE ( 'surface_pressure' )
	535	READ ( 13 ) surface_pressure
	536	CASE ( 'surface_scalarflux' )
	537	READ ( 13 ) surface_scalarflux
	538	CASE ( 'surface_waterflux' )
	539	READ ( 13 ) surface_waterflux
	540	CASE ( 's_surface' )
	541	READ ( 13 ) s_surface
	542	CASE ( 's_surface_initial_change' )
	543	READ ( 13 ) s_surface_initial_change
	544	CASE ( 's_vertical_gradient' )
	545	READ ( 13 ) s_vertical_gradient
	546	CASE ( 's_vertical_gradient_level' )
	547	READ ( 13 ) s_vertical_gradient_level
[102]	548	CASE ( 'time_coupling' )
	549	READ ( 13 ) time_coupling
[1]	550	CASE ( 'time_disturb' )
	551	READ ( 13 ) time_disturb
[587]	552	CASE ( 'time_dopr' )
[1]	553	READ ( 13 ) time_dopr
[587]	554	CASE ( 'time_domask' )
	555	READ ( 13 ) time_domask
[1]	556	CASE ( 'time_dopr_av' )
	557	READ ( 13 ) time_dopr_av
	558	CASE ( 'time_dopr_listing' )
	559	READ ( 13 ) time_dopr_listing
	560	CASE ( 'time_dopts' )
	561	READ ( 13 ) time_dopts
	562	CASE ( 'time_dosp' )
	563	READ ( 13 ) time_dosp
	564	CASE ( 'time_dots' )
	565	READ ( 13 ) time_dots
	566	CASE ( 'time_do2d_xy' )
	567	READ ( 13 ) time_do2d_xy
	568	CASE ( 'time_do2d_xz' )
	569	READ ( 13 ) time_do2d_xz
	570	CASE ( 'time_do2d_yz' )
	571	READ ( 13 ) time_do2d_yz
	572	CASE ( 'time_do3d' )
	573	READ ( 13 ) time_do3d
	574	CASE ( 'time_do_av' )
	575	READ ( 13 ) time_do_av
	576	CASE ( 'time_do_sla' )
	577	READ ( 13 ) time_do_sla
	578	CASE ( 'time_dvrp' )
	579	READ ( 13 ) time_dvrp
	580	CASE ( 'time_restart' )
	581	READ ( 13 ) time_restart
	582	CASE ( 'time_run_control' )
	583	READ ( 13 ) time_run_control
[291]	584	CASE ( 'time_since_reference_point' )
	585	READ ( 13 ) time_since_reference_point
[116]	586	CASE ( 'time_sort_particles' )
	587	READ ( 13 ) time_sort_particles
[1]	588	CASE ( 'timestep_scheme' )
	589	READ ( 13 ) timestep_scheme
	590	CASE ( 'topography' )
	591	READ ( 13 ) topography
[256]	592	CASE ( 'topography_grid_convention' )
	593	READ ( 13 ) topography_grid_convention
[19]	594	CASE ( 'top_heatflux' )
	595	READ ( 13 ) top_heatflux
[102]	596	CASE ( 'top_momentumflux_u' )
	597	READ ( 13 ) top_momentumflux_u
	598	CASE ( 'top_momentumflux_v' )
	599	READ ( 13 ) top_momentumflux_v
[94]	600	CASE ( 'top_salinityflux' )
	601	READ ( 13 ) top_salinityflux
[1]	602	CASE ( 'tsc' )
	603	READ ( 13 ) tsc
[151]	604	CASE ( 'turbulent_inflow' )
	605	READ ( 13 ) turbulent_inflow
[241]	606	CASE ( 'u_bulk' )
	607	READ ( 13 ) u_bulk
[1]	608	CASE ( 'u_init' )
	609	READ ( 13 ) u_init
	610	CASE ( 'u_max' )
	611	READ ( 13 ) u_max
	612	CASE ( 'u_max_ijk' )
	613	READ ( 13 ) u_max_ijk
	614	CASE ( 'ug' )
	615	READ ( 13 ) ug
	616	CASE ( 'ug_surface' )
	617	READ ( 13 ) ug_surface
	618	CASE ( 'ug_vertical_gradient' )
	619	READ ( 13 ) ug_vertical_gradient
	620	CASE ( 'ug_vertical_gradient_level' )
	621	READ ( 13 ) ug_vertical_gradient_level
	622	CASE ( 'ug_vertical_gradient_level_ind' )
	623	READ ( 13 ) ug_vertical_gradient_level_ind
	624	CASE ( 'ups_limit_e' )
	625	READ ( 13 ) ups_limit_e
	626	CASE ( 'ups_limit_pt' )
	627	READ ( 13 ) ups_limit_pt
	628	CASE ( 'ups_limit_u' )
	629	READ ( 13 ) ups_limit_u
	630	CASE ( 'ups_limit_v' )
	631	READ ( 13 ) ups_limit_v
	632	CASE ( 'ups_limit_w' )
	633	READ ( 13 ) ups_limit_w
	634	CASE ( 'use_surface_fluxes' )
	635	READ ( 13 ) use_surface_fluxes
[20]	636	CASE ( 'use_top_fluxes' )
	637	READ ( 13 ) use_top_fluxes
[1]	638	CASE ( 'use_ug_for_galilei_tr' )
	639	READ ( 13 ) use_ug_for_galilei_tr
	640	CASE ( 'use_upstream_for_tke' )
	641	READ ( 13 ) use_upstream_for_tke
[241]	642	CASE ( 'v_bulk' )
	643	READ ( 13 ) v_bulk
[1]	644	CASE ( 'v_init' )
	645	READ ( 13 ) v_init
	646	CASE ( 'v_max' )
	647	READ ( 13 ) v_max
	648	CASE ( 'v_max_ijk' )
	649	READ ( 13 ) v_max_ijk
	650	CASE ( 'vg' )
	651	READ ( 13 ) vg
	652	CASE ( 'vg_surface' )
	653	READ ( 13 ) vg_surface
	654	CASE ( 'vg_vertical_gradient' )
	655	READ ( 13 ) vg_vertical_gradient
	656	CASE ( 'vg_vertical_gradient_level' )
	657	READ ( 13 ) vg_vertical_gradient_level
	658	CASE ( 'vg_vertical_gradient_level_ind' )
	659	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	660	CASE ( 'volume_flow_area' )
	661	READ ( 13 ) volume_flow_area
	662	CASE ( 'volume_flow_initial' )
	663	READ ( 13 ) volume_flow_initial
[1]	664	CASE ( 'wall_adjustment' )
	665	READ ( 13 ) wall_adjustment
[580]	666	CASE ( 'subs_vertical_gradient' )
	667	READ ( 13 ) subs_vertical_gradient
	668	CASE ( 'subs_vertical_gradient_level' )
	669	READ ( 13 ) subs_vertical_gradient_level
	670	CASE ( 'subs_vertical_gradient_level_i' )
	671	READ ( 13 ) subs_vertical_gradient_level_i
[1]	672	CASE ( 'w_max' )
	673	READ ( 13 ) w_max
	674	CASE ( 'w_max_ijk' )
	675	READ ( 13 ) w_max_ijk
	676
	677	CASE DEFAULT
[257]	678	WRITE( message_string, * ) 'unknown variable named "', &
	679	TRIM( variable_chr ), '" found in', &
	680	' data from prior run on PE ', myid
	681	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	682	END SELECT
	683	!
	684	!-- Read next string
	685	READ ( 13 ) variable_chr
	686
	687	ENDDO
	688
	689
[146]	690	END SUBROUTINE read_var_list
[143]	691
[146]	692
	693
[147]	694	SUBROUTINE read_parts_of_var_list
	695
	696	!------------------------------------------------------------------------------!
	697	! Description:
	698	! ------------
	699	! Skipping the global control variables from restart-file (binary format)
	700	! except some informations needed when reading restart data from a previous
[151]	701	! run which used a smaller total domain or/and a different domain decomposition.
[147]	702	!------------------------------------------------------------------------------!
	703
[151]	704	USE arrays_3d
[147]	705	USE control_parameters
	706	USE indices
	707	USE pegrid
	708	USE statistics
	709
	710	IMPLICIT NONE
	711
	712	CHARACTER (LEN=10) :: version_on_file
	713	CHARACTER (LEN=30) :: variable_chr
[626]	714	CHARACTER (LEN=1) :: cdum
[147]	715
	716	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	717	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	718
[151]	719	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	720	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	721
	722
	723	CALL check_open( 13 )
	724
	725	WRITE (9,*) 'rpovl: after check open 13'
	726	CALL local_flush( 9 )
	727	READ ( 13 ) version_on_file
	728
	729	!
	730	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	731	!-- run
	732	READ ( 13 ) variable_chr
	733	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	734	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	735	'run on PE ', myid
[257]	736	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	737	ENDIF
	738	READ ( 13 ) numprocs_previous_run
	739
	740	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	741	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	742	ENDIF
	743
	744	READ ( 13 ) variable_chr
	745	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	746	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	747	'prior run on PE ', myid
	748	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	749	ENDIF
	750	READ ( 13 ) hor_index_bounds_previous_run
	751
	752	!
	753	!-- Read vertical number of gridpoints and number of different areas used
	754	!-- for computing statistics. Allocate arrays depending on these values,
	755	!-- which are needed for the following read instructions.
	756	READ ( 13 ) variable_chr
	757	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	758	message_string = 'nz not found in restart data file'
	759	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	760	ENDIF
	761	READ ( 13 ) nz_on_file
	762	IF ( nz_on_file /= nz ) THEN
[257]	763	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	764	'gridpoints along z', &
	765	'&nz on file = "', nz_on_file, '"', &
	766	'&nz from run = "', nz, '"'
[257]	767	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	768	ENDIF
	769
	770	READ ( 13 ) variable_chr
	771	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	772	message_string = 'max_pr_user not found in restart data file'
	773	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	774	ENDIF
	775	READ ( 13 ) max_pr_user_on_file
[170]	776	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	777	WRITE( message_string, * ) 'number of user profiles on res', &
	778	'tart data file differs from the current ', &
	779	'run&max_pr_user on file = "', &
	780	max_pr_user_on_file, '"', &
	781	'&max_pr_user from run = "', &
[257]	782	max_pr_user, '"'
	783	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	784	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	785	ELSE
	786	tmp_mpru = max_pr_user
[147]	787	ENDIF
	788
	789	READ ( 13 ) variable_chr
	790	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	791	message_string = 'statistic_regions not found in restart data file'
	792	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	793	ENDIF
	794	READ ( 13 ) statistic_regions_on_file
[173]	795	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	796	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	797	'differ from the current run', &
	798	'&statistic regions on file = "', &
	799	statistic_regions_on_file, '"', &
	800	'&statistic regions from run = "', &
	801	statistic_regions, '"', &
[257]	802	'&statistic data may be lost!'
	803	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	804	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	805	ELSE
	806	tmp_sr = statistic_regions
[147]	807	ENDIF
	808
	809
	810	!
	811	!-- Now read and check some control parameters and skip the rest
	812	WRITE (9,*) 'wpovl: begin reading variables'
	813	CALL local_flush( 9 )
	814	READ ( 13 ) variable_chr
	815
	816	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	817
	818	SELECT CASE ( TRIM( variable_chr ) )
	819
[151]	820	CASE ( 'average_count_pr' )
	821	READ ( 13 ) average_count_pr
[257]	822	IF ( average_count_pr /= 0 ) THEN
[274]	823	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	824	'averaged. &Averaging will be done now using ', &
	825	average_count_pr, ' samples.'
	826	CALL message( 'read_parts_of_var_list', 'PA0309', &
	827	0, 1, 0, 6, 0 )
[151]	828	ENDIF
	829
[147]	830	CASE ( 'hom' )
	831	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	832	0:statistic_regions_on_file) )
	833	READ ( 13 ) hom_on_file
[170]	834	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	835	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	836	DEALLOCATE( hom_on_file )
	837
[151]	838	CASE ( 'hom_sum' )
	839	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	840	0:statistic_regions_on_file) )
	841	READ ( 13 ) hom_sum_on_file
[170]	842	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	843	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	844	DEALLOCATE( hom_sum_on_file )
	845
[147]	846	CASE ( 'nx' )
	847	READ ( 13 ) nx_on_file
	848
	849	CASE ( 'ny' )
	850	READ ( 13 ) ny_on_file
	851
	852
	853	CASE DEFAULT
	854
[626]	855	READ ( 13 ) cdum
[147]	856
	857	END SELECT
	858
	859	READ ( 13 ) variable_chr
	860
	861	ENDDO
	862
[151]	863	!
	864	!-- Calculate the temporal average of vertical profiles, if neccessary
	865	IF ( average_count_pr /= 0 ) THEN
	866	hom_sum = hom_sum / REAL( average_count_pr )
	867	ENDIF
[147]	868
[151]	869
[147]	870	END SUBROUTINE read_parts_of_var_list
	871
	872
	873
[146]	874	SUBROUTINE skip_var_list
	875
	876	!------------------------------------------------------------------------------!
	877	! Description:
	878	! ------------
	879	! Skipping the global control variables from restart-file (binary format)
	880	!------------------------------------------------------------------------------!
	881
[147]	882	IMPLICIT NONE
	883
[146]	884	CHARACTER (LEN=10) :: version_on_file
	885	CHARACTER (LEN=30) :: variable_chr
	886
[600]	887	CHARACTER (LEN=1) :: cdum
[146]	888
	889
[147]	890	WRITE (9,*) 'skipvl #1'
	891	CALL local_flush( 9 )
[146]	892	READ ( 13 ) version_on_file
	893
[147]	894	WRITE (9,*) 'skipvl before variable_chr'
	895	CALL local_flush( 9 )
[146]	896	READ ( 13 ) variable_chr
[147]	897	WRITE (9,*) 'skipvl after variable_chr'
	898	CALL local_flush( 9 )
[146]	899
	900	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	901
[147]	902	WRITE (9,*) 'skipvl chr = ', variable_chr
	903	CALL local_flush( 9 )
[600]	904	READ ( 13 ) cdum
[146]	905	READ ( 13 ) variable_chr
	906
	907	ENDDO
[147]	908	WRITE (9,*) 'skipvl last'
	909	CALL local_flush( 9 )
[146]	910
	911
	912	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |