Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 833

Last change on this file since 833 was 826, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.2 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[622]	5	! ------------------
[826]	6	!
[601]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: read_var_list.f90 826 2012-02-19 03:41:34Z maronga $
	11	!
[826]	12	! 824 2012-02-17 09:09:57Z raasch
	13	! +curvature_solution_effects
	14	!
[627]	15	! 626 2010-12-10 13:04:12Z suehring
	16	! idum replaced by cdum in read_parts_of_var_list
	17	!
[623]	18	! 622 2010-12-10 08:08:13Z raasch
	19	! +collective_wait
	20	!
[601]	21	! 600 2010-11-24 16:10:51Z raasch
[600]	22	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
	23	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
	24	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
	25	! in routine skip_var_list (end of this file), variable ldum is replaced
	26	! by cdum(LEN=1), because otherwise read errors (too few data on file)
	27	! appear due to one of the additional parameters (cycle_mg) which are now
	28	! stored on the restart file
[392]	29	!
[592]	30	! 591 2010-10-28 06:35:52Z helmke
	31	! remove print command
	32	!
[588]	33	! 587 2010-10-27 08:36:51Z helmke
	34	! +time_domask
	35	!
[581]	36	! 580 2010-10-05 13:59:11Z heinze
	37	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	38	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	39	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	40	!
[482]	41	! 411 2009-12-11 14:15:58Z heinze
	42	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	43	! ws_vertical_gradient_level_ind
	44	!
[392]	45	! 345 2009-07-01 14:37:56Z heinze
[345]	46	! +output_for_t0
[336]	47	! dt_fixed is read into a dummy variable.
[257]	48	! Output of messages replaced by message handling routine.
[240]	49	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	50	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	51	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	52	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	53	!
[226]	54	! 216 2008-11-25 07:12:43Z raasch
	55	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	56	!
[198]	57	! 173 2008-05-23 20:39:38Z raasch
[153]	58	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	59	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	60	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	61	! recycling_width, turbulent_inflow,
[145]	62	! -cross_ts_*, npex, npey,
	63	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	64	! read_3d_binary to here,
[147]	65	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	66	!
[139]	67	! 138 2007-11-28 10:03:58Z letzel
	68	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	69	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	70	! plant_canopy, time_sort_particles
	71	!
[110]	72	! 102 2007-07-27 09:09:17Z raasch
	73	! +time_coupling, top_momentumflux_u\|v
	74	!
[98]	75	! 95 2007-06-02 16:48:38Z raasch
	76	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	77	! sa_vertical_gradient_level, bottom/top_salinity_flux
	78	!
[90]	79	! 87 2007-05-22 15:46:47Z raasch
	80	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	81	!
[77]	82	! 75 2007-03-22 09:54:05Z raasch
	83	! +loop_optimization, pt_reference, moisture renamed humidity
	84	!
[39]	85	! 20 2007-02-26 00:12:32Z raasch
	86	! +top_heatflux, use_top_fluxes
	87	!
[3]	88	! RCS Log replace by Id keyword, revision history cleaned up
	89	!
[1]	90	! Revision 1.34 2006/08/22 14:14:27 raasch
	91	! +dz_max
	92	!
	93	! Revision 1.1 1998/03/18 20:18:48 raasch
	94	! Initial revision
	95	!
	96	!
	97	! Description:
	98	! ------------
[143]	99	! Reading values of global control variables from restart-file (binary format)
[1]	100	!------------------------------------------------------------------------------!
	101
	102	USE arrays_3d
	103	USE averaging
[824]	104	USE cloud_parameters
[87]	105	USE control_parameters
[1]	106	USE grid_variables
	107	USE indices
	108	USE model_1d
[345]	109	USE netcdf_control
[116]	110	USE particle_attributes
[1]	111	USE pegrid
	112	USE profil_parameter
	113	USE statistics
	114
	115	IMPLICIT NONE
	116
	117	CHARACTER (LEN=10) :: binary_version, version_on_file
	118	CHARACTER (LEN=30) :: variable_chr
[87]	119
[336]	120	LOGICAL :: ldum
[143]	121
[336]	122
[1]	123	CALL check_open( 13 )
	124
	125	!
	126	!-- Make version number check first
	127	READ ( 13 ) version_on_file
[600]	128	binary_version = '3.5'
[1]	129	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	130	WRITE( message_string, * ) 'version mismatch concerning control ', &
	131	'variables', &
	132	'&version on file = "', &
	133	TRIM( version_on_file ), '"', &
	134	'&version on program = "', &
	135	TRIM( binary_version ), '"'
	136	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	137	ENDIF
	138
	139	!
[145]	140	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	141	!-- run
	142	READ ( 13 ) variable_chr
	143	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	144	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	145	'run on PE ', myid
[257]	146	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	147	ENDIF
	148	READ ( 13 ) numprocs_previous_run
	149
[146]	150	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	151	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	152	ENDIF
[145]	153
	154	READ ( 13 ) variable_chr
	155	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	156	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	157	'prior run on PE ', myid
	158	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	159	ENDIF
	160	READ ( 13 ) hor_index_bounds_previous_run
	161
	162	!
[1]	163	!-- Read vertical number of gridpoints and number of different areas used
	164	!-- for computing statistics. Allocate arrays depending on these values,
	165	!-- which are needed for the following read instructions.
	166	READ ( 13 ) variable_chr
	167	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	168	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	169	myid
	170	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	171	ENDIF
	172	READ ( 13 ) nz
[87]	173
[1]	174	READ ( 13 ) variable_chr
[87]	175	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	176	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	177	'prior run on PE ', myid
[257]	178	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	179	ENDIF
[159]	180	READ ( 13 ) max_pr_user ! This value is checked against the number of
	181	! user profiles given for the current run
	182	! in routine user_parin (it has to match)
[87]	183
	184	READ ( 13 ) variable_chr
[1]	185	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	186	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	187	'prior run on PE ', myid
[257]	188	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	189	ENDIF
	190	READ ( 13 ) statistic_regions
[146]	191	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	192	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	193	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	194	sa_init(0:nz+1), &
[146]	195	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	196	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	197	ENDIF
[1]	198
	199	!
	200	!-- Now read all control parameters:
	201	!-- Caution: When the following read instructions have been changed, the
	202	!-- ------- version number stored in the variable binary_version has to be
	203	!-- increased. The same changes must also be done in write_var_list.
	204	READ ( 13 ) variable_chr
	205	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	206
	207	SELECT CASE ( TRIM( variable_chr ) )
	208
	209	CASE ( 'adjust_mixing_length' )
	210	READ ( 13 ) adjust_mixing_length
	211	CASE ( 'advected_distance_x' )
	212	READ ( 13 ) advected_distance_x
	213	CASE ( 'advected_distance_y' )
	214	READ ( 13 ) advected_distance_y
	215	CASE ( 'alpha_surface' )
	216	READ ( 13 ) alpha_surface
	217	CASE ( 'average_count_pr' )
	218	READ ( 13 ) average_count_pr
	219	CASE ( 'average_count_sp' )
	220	READ ( 13 ) average_count_sp
	221	CASE ( 'average_count_3d' )
	222	READ ( 13 ) average_count_3d
	223	CASE ( 'bc_e_b' )
	224	READ ( 13 ) bc_e_b
	225	CASE ( 'bc_lr' )
	226	READ ( 13 ) bc_lr
	227	CASE ( 'bc_ns' )
	228	READ ( 13 ) bc_ns
	229	CASE ( 'bc_p_b' )
	230	READ ( 13 ) bc_p_b
	231	CASE ( 'bc_p_t' )
	232	READ ( 13 ) bc_p_t
	233	CASE ( 'bc_pt_b' )
	234	READ ( 13 ) bc_pt_b
	235	CASE ( 'bc_pt_t' )
	236	READ ( 13 ) bc_pt_t
	237	CASE ( 'bc_pt_t_val' )
	238	READ ( 13 ) bc_pt_t_val
	239	CASE ( 'bc_q_b' )
	240	READ ( 13 ) bc_q_b
	241	CASE ( 'bc_q_t' )
	242	READ ( 13 ) bc_q_t
	243	CASE ( 'bc_q_t_val' )
	244	READ ( 13 ) bc_q_t_val
	245	CASE ( 'bc_s_b' )
	246	READ ( 13 ) bc_s_b
	247	CASE ( 'bc_s_t' )
	248	READ ( 13 ) bc_s_t
[95]	249	CASE ( 'bc_sa_t' )
	250	READ ( 13 ) bc_sa_t
[1]	251	CASE ( 'bc_uv_b' )
	252	READ ( 13 ) bc_uv_b
	253	CASE ( 'bc_uv_t' )
	254	READ ( 13 ) bc_uv_t
[95]	255	CASE ( 'bottom_salinityflux' )
	256	READ ( 13 ) bottom_salinityflux
[1]	257	CASE ( 'building_height' )
	258	READ ( 13 ) building_height
	259	CASE ( 'building_length_x' )
	260	READ ( 13 ) building_length_x
	261	CASE ( 'building_length_y' )
	262	READ ( 13 ) building_length_y
	263	CASE ( 'building_wall_left' )
	264	READ ( 13 ) building_wall_left
	265	CASE ( 'building_wall_south' )
	266	READ ( 13 ) building_wall_south
[600]	267	CASE ( 'call_psolver_at_all_substeps' )
	268	READ ( 13 ) call_psolver_at_all_substeps
[138]	269	CASE ( 'canopy_mode' )
	270	READ ( 13 ) canopy_mode
[240]	271	CASE ( 'canyon_height' )
	272	READ ( 13 ) canyon_height
	273	CASE ( 'canyon_width_x' )
	274	READ ( 13 ) canyon_width_x
	275	CASE ( 'canyon_width_y' )
	276	READ ( 13 ) canyon_width_y
	277	CASE ( 'canyon_wall_left' )
	278	READ ( 13 ) canyon_wall_left
	279	CASE ( 'canyon_wall_south' )
	280	READ ( 13 ) canyon_wall_south
[600]	281	CASE ( 'cfl_factor' )
	282	READ ( 13 ) cfl_factor
[1]	283	CASE ( 'cloud_droplets' )
	284	READ ( 13 ) cloud_droplets
	285	CASE ( 'cloud_physics' )
	286	READ ( 13 ) cloud_physics
[622]	287	CASE ( 'collective_wait' )
	288	READ ( 13 ) collective_wait
[1]	289	CASE ( 'conserve_volume_flow' )
	290	READ ( 13 ) conserve_volume_flow
[241]	291	CASE ( 'conserve_volume_flow_mode' )
	292	READ ( 13 ) conserve_volume_flow_mode
[291]	293	CASE ( 'coupling_start_time' )
	294	READ ( 13 ) coupling_start_time
[153]	295	CASE ( 'cthf' )
	296	READ ( 13 ) cthf
[1]	297	CASE ( 'current_timestep_number' )
	298	READ ( 13 ) current_timestep_number
[824]	299	CASE ( 'curvature_solution_effects' )
	300	READ ( 13 ) curvature_solution_effects
[1]	301	CASE ( 'cut_spline_overshoot' )
	302	READ ( 13 ) cut_spline_overshoot
[600]	303	CASE ( 'cycle_mg' )
	304	READ ( 13 ) cycle_mg
[1]	305	CASE ( 'damp_level_1d' )
	306	READ ( 13 ) damp_level_1d
	307	CASE ( 'dissipation_1d' )
	308	READ ( 13 ) dissipation_1d
[240]	309	CASE ( 'dp_external' )
	310	READ ( 13 ) dp_external
	311	CASE ( 'dp_level_b' )
	312	READ ( 13 ) dp_level_b
	313	CASE ( 'dp_smooth' )
	314	READ ( 13 ) dp_smooth
	315	CASE ( 'dpdxy' )
	316	READ ( 13 ) dpdxy
[138]	317	CASE ( 'drag_coefficient' )
	318	READ ( 13 ) drag_coefficient
[1]	319	CASE ( 'dt_fixed' )
[336]	320	READ ( 13 ) ldum ! restart files created before rev 333
	321	! contained dt_fixed by mistake; it is still
	322	! read here in order to allow usage of these
	323	! older restart files; can be removed in a
	324	! later version
[1]	325	CASE ( 'dt_pr_1d' )
	326	READ ( 13 ) dt_pr_1d
	327	CASE ( 'dt_run_control_1d' )
	328	READ ( 13 ) dt_run_control_1d
	329	CASE ( 'dt_3d' )
	330	READ ( 13 ) dt_3d
	331	CASE ( 'dvrp_filecount' )
	332	READ ( 13 ) dvrp_filecount
	333	CASE ( 'dx' )
	334	READ ( 13 ) dx
	335	CASE ( 'dy' )
	336	READ ( 13 ) dy
	337	CASE ( 'dz' )
	338	READ ( 13 ) dz
	339	CASE ( 'dz_max' )
	340	READ ( 13 ) dz_max
	341	CASE ( 'dz_stretch_factor' )
	342	READ ( 13 ) dz_stretch_factor
	343	CASE ( 'dz_stretch_level' )
	344	READ ( 13 ) dz_stretch_level
	345	CASE ( 'e_min' )
	346	READ ( 13 ) e_min
	347	CASE ( 'end_time_1d' )
	348	READ ( 13 ) end_time_1d
	349	CASE ( 'fft_method' )
	350	READ ( 13 ) fft_method
	351	CASE ( 'first_call_advec_particles' )
	352	READ ( 13 ) first_call_advec_particles
	353	CASE ( 'galilei_transformation' )
	354	READ ( 13 ) galilei_transformation
	355	CASE ( 'grid_matching' )
	356	READ ( 13 ) grid_matching
	357	CASE ( 'hom' )
	358	READ ( 13 ) hom
[143]	359	CASE ( 'hom_sum' )
	360	READ ( 13 ) hom_sum
[151]	361	CASE ( 'humidity' )
	362	READ ( 13 ) humidity
	363	CASE ( 'inflow_damping_factor' )
	364	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	365	ALLOCATE( inflow_damping_factor(0:nz+1) )
	366	ENDIF
	367	READ ( 13 ) inflow_damping_factor
	368	CASE ( 'inflow_damping_height' )
	369	READ ( 13 ) inflow_damping_height
	370	CASE ( 'inflow_damping_width' )
	371	READ ( 13 ) inflow_damping_width
[1]	372	CASE ( 'inflow_disturbance_begin' )
	373	READ ( 13 ) inflow_disturbance_begin
	374	CASE ( 'inflow_disturbance_end' )
	375	READ ( 13 ) inflow_disturbance_end
	376	CASE ( 'km_constant' )
	377	READ ( 13 ) km_constant
	378	CASE ( 'km_damp_max' )
	379	READ ( 13 ) km_damp_max
[138]	380	CASE ( 'lad' )
	381	READ ( 13 ) lad
	382	CASE ( 'lad_surface' )
	383	READ ( 13 ) lad_surface
	384	CASE ( 'lad_vertical_gradient' )
	385	READ ( 13 ) lad_vertical_gradient
	386	CASE ( 'lad_vertical_gradient_level' )
	387	READ ( 13 ) lad_vertical_gradient_level
	388	CASE ( 'lad_vertical_gradient_level_in' )
	389	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	390	CASE ( 'last_dt_change' )
	391	READ ( 13 ) last_dt_change
[411]	392	CASE ( 'large_scale_subsidence' )
	393	READ ( 13 ) large_scale_subsidence
[153]	394	CASE ( 'leaf_surface_concentration' )
	395	READ ( 13 ) leaf_surface_concentration
[1]	396	CASE ( 'long_filter_factor' )
	397	READ ( 13 ) long_filter_factor
[63]	398	CASE ( 'loop_optimization' )
	399	READ ( 13 ) loop_optimization
[151]	400	CASE ( 'mean_inflow_profiles' )
	401	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	402	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	403	ENDIF
	404	READ ( 13 ) mean_inflow_profiles
[600]	405	CASE ( 'mg_cycles' )
	406	READ ( 13 ) mg_cycles
	407	CASE ( 'mg_switch_to_pe0_level' )
	408	READ ( 13 ) mg_switch_to_pe0_level
[1]	409	CASE ( 'mixing_length_1d' )
	410	READ ( 13 ) mixing_length_1d
	411	CASE ( 'momentum_advec' )
	412	READ ( 13 ) momentum_advec
	413	CASE ( 'netcdf_precision' )
	414	READ ( 13 ) netcdf_precision
[600]	415	CASE ( 'ngsrb' )
	416	READ ( 13 ) ngsrb
	417	CASE ( 'nsor' )
	418	READ ( 13 ) nsor
[1]	419	CASE ( 'nsor_ini' )
	420	READ ( 13 ) nsor_ini
	421	CASE ( 'nx' )
	422	READ ( 13 ) nx
[147]	423	nx_on_file = nx
[1]	424	CASE ( 'ny' )
	425	READ ( 13 ) ny
[147]	426	ny_on_file = ny
[94]	427	CASE ( 'ocean' )
	428	READ ( 13 ) ocean
[1]	429	CASE ( 'old_dt' )
	430	READ ( 13 ) old_dt
	431	CASE ( 'omega' )
	432	READ ( 13 ) omega
[600]	433	CASE ( 'omega_sor' )
	434	READ ( 13 ) omega_sor
[1]	435	CASE ( 'outflow_damping_width' )
	436	READ ( 13 ) outflow_damping_width
[345]	437	CASE ( 'output_for_t0' )
	438	READ (13) output_for_t0
[1]	439	CASE ( 'overshoot_limit_e' )
	440	READ ( 13 ) overshoot_limit_e
	441	CASE ( 'overshoot_limit_pt' )
	442	READ ( 13 ) overshoot_limit_pt
	443	CASE ( 'overshoot_limit_u' )
	444	READ ( 13 ) overshoot_limit_u
	445	CASE ( 'overshoot_limit_v' )
	446	READ ( 13 ) overshoot_limit_v
	447	CASE ( 'overshoot_limit_w' )
	448	READ ( 13 ) overshoot_limit_w
	449	CASE ( 'passive_scalar' )
	450	READ ( 13 ) passive_scalar
[138]	451	CASE ( 'pch_index' )
	452	READ ( 13 ) pch_index
[1]	453	CASE ( 'phi' )
	454	READ ( 13 ) phi
[138]	455	CASE ( 'plant_canopy' )
	456	READ ( 13 ) plant_canopy
[1]	457	CASE ( 'prandtl_layer' )
	458	READ ( 13 ) prandtl_layer
[600]	459	CASE ( 'prandtl_number' )
	460	READ ( 13 ) prandtl_number
[1]	461	CASE ( 'precipitation' )
	462	READ ( 13 ) precipitation
[600]	463	CASE ( 'psolver' )
	464	READ ( 13 ) psolver
[1]	465	CASE ( 'pt_init' )
	466	READ ( 13 ) pt_init
[57]	467	CASE ( 'pt_reference' )
	468	READ ( 13 ) pt_reference
[1]	469	CASE ( 'pt_surface' )
	470	READ ( 13 ) pt_surface
	471	CASE ( 'pt_surface_initial_change' )
	472	READ ( 13 ) pt_surface_initial_change
	473	CASE ( 'pt_vertical_gradient' )
	474	READ ( 13 ) pt_vertical_gradient
	475	CASE ( 'pt_vertical_gradient_level' )
	476	READ ( 13 ) pt_vertical_gradient_level
	477	CASE ( 'pt_vertical_gradient_level_ind' )
	478	READ ( 13 ) pt_vertical_gradient_level_ind
	479	CASE ( 'q_init' )
	480	READ ( 13 ) q_init
	481	CASE ( 'q_surface' )
	482	READ ( 13 ) q_surface
	483	CASE ( 'q_surface_initial_change' )
	484	READ ( 13 ) q_surface_initial_change
	485	CASE ( 'q_vertical_gradient' )
	486	READ ( 13 ) q_vertical_gradient
	487	CASE ( 'q_vertical_gradient_level' )
	488	READ ( 13 ) q_vertical_gradient_level
	489	CASE ( 'q_vertical_gradient_level_ind' )
	490	READ ( 13 ) q_vertical_gradient_level_ind
	491	CASE ( 'radiation' )
	492	READ ( 13 ) radiation
	493	CASE ( 'random_generator' )
	494	READ ( 13 ) random_generator
	495	CASE ( 'random_heatflux' )
	496	READ ( 13 ) random_heatflux
[600]	497	CASE ( 'rayleigh_damping_factor' )
	498	READ ( 13 ) rayleigh_damping_factor
	499	CASE ( 'rayleigh_damping_height' )
	500	READ ( 13 ) rayleigh_damping_height
[151]	501	CASE ( 'recycling_width' )
	502	READ ( 13 ) recycling_width
[600]	503	CASE ( 'residual_limit' )
	504	READ ( 13 ) residual_limit
[1]	505	CASE ( 'rif_max' )
	506	READ ( 13 ) rif_max
	507	CASE ( 'rif_min' )
	508	READ ( 13 ) rif_min
	509	CASE ( 'roughness_length' )
	510	READ ( 13 ) roughness_length
	511	CASE ( 'runnr' )
	512	READ ( 13 ) runnr
[291]	513	CASE ( 'run_coupled' )
	514	READ ( 13 ) run_coupled
[94]	515	CASE ( 'sa_init' )
	516	READ ( 13 ) sa_init
	517	CASE ( 'sa_surface' )
	518	READ ( 13 ) sa_surface
	519	CASE ( 'sa_vertical_gradient' )
	520	READ ( 13 ) sa_vertical_gradient
	521	CASE ( 'sa_vertical_gradient_level' )
	522	READ ( 13 ) sa_vertical_gradient_level
[1]	523	CASE ( 'scalar_advec' )
	524	READ ( 13 ) scalar_advec
[153]	525	CASE ( 'scalar_exchange_coefficient' )
	526	READ ( 13 ) scalar_exchange_coefficient
[1]	527	CASE ( 'simulated_time' )
	528	READ ( 13 ) simulated_time
	529	CASE ( 'surface_heatflux' )
	530	READ ( 13 ) surface_heatflux
	531	CASE ( 'surface_pressure' )
	532	READ ( 13 ) surface_pressure
	533	CASE ( 'surface_scalarflux' )
	534	READ ( 13 ) surface_scalarflux
	535	CASE ( 'surface_waterflux' )
	536	READ ( 13 ) surface_waterflux
	537	CASE ( 's_surface' )
	538	READ ( 13 ) s_surface
	539	CASE ( 's_surface_initial_change' )
	540	READ ( 13 ) s_surface_initial_change
	541	CASE ( 's_vertical_gradient' )
	542	READ ( 13 ) s_vertical_gradient
	543	CASE ( 's_vertical_gradient_level' )
	544	READ ( 13 ) s_vertical_gradient_level
[102]	545	CASE ( 'time_coupling' )
	546	READ ( 13 ) time_coupling
[1]	547	CASE ( 'time_disturb' )
	548	READ ( 13 ) time_disturb
[587]	549	CASE ( 'time_dopr' )
[1]	550	READ ( 13 ) time_dopr
[587]	551	CASE ( 'time_domask' )
	552	READ ( 13 ) time_domask
[1]	553	CASE ( 'time_dopr_av' )
	554	READ ( 13 ) time_dopr_av
	555	CASE ( 'time_dopr_listing' )
	556	READ ( 13 ) time_dopr_listing
	557	CASE ( 'time_dopts' )
	558	READ ( 13 ) time_dopts
	559	CASE ( 'time_dosp' )
	560	READ ( 13 ) time_dosp
	561	CASE ( 'time_dots' )
	562	READ ( 13 ) time_dots
	563	CASE ( 'time_do2d_xy' )
	564	READ ( 13 ) time_do2d_xy
	565	CASE ( 'time_do2d_xz' )
	566	READ ( 13 ) time_do2d_xz
	567	CASE ( 'time_do2d_yz' )
	568	READ ( 13 ) time_do2d_yz
	569	CASE ( 'time_do3d' )
	570	READ ( 13 ) time_do3d
	571	CASE ( 'time_do_av' )
	572	READ ( 13 ) time_do_av
	573	CASE ( 'time_do_sla' )
	574	READ ( 13 ) time_do_sla
	575	CASE ( 'time_dvrp' )
	576	READ ( 13 ) time_dvrp
	577	CASE ( 'time_restart' )
	578	READ ( 13 ) time_restart
	579	CASE ( 'time_run_control' )
	580	READ ( 13 ) time_run_control
[291]	581	CASE ( 'time_since_reference_point' )
	582	READ ( 13 ) time_since_reference_point
[116]	583	CASE ( 'time_sort_particles' )
	584	READ ( 13 ) time_sort_particles
[1]	585	CASE ( 'timestep_scheme' )
	586	READ ( 13 ) timestep_scheme
	587	CASE ( 'topography' )
	588	READ ( 13 ) topography
[256]	589	CASE ( 'topography_grid_convention' )
	590	READ ( 13 ) topography_grid_convention
[19]	591	CASE ( 'top_heatflux' )
	592	READ ( 13 ) top_heatflux
[102]	593	CASE ( 'top_momentumflux_u' )
	594	READ ( 13 ) top_momentumflux_u
	595	CASE ( 'top_momentumflux_v' )
	596	READ ( 13 ) top_momentumflux_v
[94]	597	CASE ( 'top_salinityflux' )
	598	READ ( 13 ) top_salinityflux
[1]	599	CASE ( 'tsc' )
	600	READ ( 13 ) tsc
[151]	601	CASE ( 'turbulent_inflow' )
	602	READ ( 13 ) turbulent_inflow
[241]	603	CASE ( 'u_bulk' )
	604	READ ( 13 ) u_bulk
[1]	605	CASE ( 'u_init' )
	606	READ ( 13 ) u_init
	607	CASE ( 'u_max' )
	608	READ ( 13 ) u_max
	609	CASE ( 'u_max_ijk' )
	610	READ ( 13 ) u_max_ijk
	611	CASE ( 'ug' )
	612	READ ( 13 ) ug
	613	CASE ( 'ug_surface' )
	614	READ ( 13 ) ug_surface
	615	CASE ( 'ug_vertical_gradient' )
	616	READ ( 13 ) ug_vertical_gradient
	617	CASE ( 'ug_vertical_gradient_level' )
	618	READ ( 13 ) ug_vertical_gradient_level
	619	CASE ( 'ug_vertical_gradient_level_ind' )
	620	READ ( 13 ) ug_vertical_gradient_level_ind
	621	CASE ( 'ups_limit_e' )
	622	READ ( 13 ) ups_limit_e
	623	CASE ( 'ups_limit_pt' )
	624	READ ( 13 ) ups_limit_pt
	625	CASE ( 'ups_limit_u' )
	626	READ ( 13 ) ups_limit_u
	627	CASE ( 'ups_limit_v' )
	628	READ ( 13 ) ups_limit_v
	629	CASE ( 'ups_limit_w' )
	630	READ ( 13 ) ups_limit_w
	631	CASE ( 'use_surface_fluxes' )
	632	READ ( 13 ) use_surface_fluxes
[20]	633	CASE ( 'use_top_fluxes' )
	634	READ ( 13 ) use_top_fluxes
[1]	635	CASE ( 'use_ug_for_galilei_tr' )
	636	READ ( 13 ) use_ug_for_galilei_tr
	637	CASE ( 'use_upstream_for_tke' )
	638	READ ( 13 ) use_upstream_for_tke
[241]	639	CASE ( 'v_bulk' )
	640	READ ( 13 ) v_bulk
[1]	641	CASE ( 'v_init' )
	642	READ ( 13 ) v_init
	643	CASE ( 'v_max' )
	644	READ ( 13 ) v_max
	645	CASE ( 'v_max_ijk' )
	646	READ ( 13 ) v_max_ijk
	647	CASE ( 'vg' )
	648	READ ( 13 ) vg
	649	CASE ( 'vg_surface' )
	650	READ ( 13 ) vg_surface
	651	CASE ( 'vg_vertical_gradient' )
	652	READ ( 13 ) vg_vertical_gradient
	653	CASE ( 'vg_vertical_gradient_level' )
	654	READ ( 13 ) vg_vertical_gradient_level
	655	CASE ( 'vg_vertical_gradient_level_ind' )
	656	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	657	CASE ( 'volume_flow_area' )
	658	READ ( 13 ) volume_flow_area
	659	CASE ( 'volume_flow_initial' )
	660	READ ( 13 ) volume_flow_initial
[1]	661	CASE ( 'wall_adjustment' )
	662	READ ( 13 ) wall_adjustment
[580]	663	CASE ( 'subs_vertical_gradient' )
	664	READ ( 13 ) subs_vertical_gradient
	665	CASE ( 'subs_vertical_gradient_level' )
	666	READ ( 13 ) subs_vertical_gradient_level
	667	CASE ( 'subs_vertical_gradient_level_i' )
	668	READ ( 13 ) subs_vertical_gradient_level_i
[1]	669	CASE ( 'w_max' )
	670	READ ( 13 ) w_max
	671	CASE ( 'w_max_ijk' )
	672	READ ( 13 ) w_max_ijk
	673
	674	CASE DEFAULT
[257]	675	WRITE( message_string, * ) 'unknown variable named "', &
	676	TRIM( variable_chr ), '" found in', &
	677	' data from prior run on PE ', myid
	678	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	679	END SELECT
	680	!
	681	!-- Read next string
	682	READ ( 13 ) variable_chr
	683
	684	ENDDO
	685
	686
[146]	687	END SUBROUTINE read_var_list
[143]	688
[146]	689
	690
[147]	691	SUBROUTINE read_parts_of_var_list
	692
	693	!------------------------------------------------------------------------------!
	694	! Description:
	695	! ------------
	696	! Skipping the global control variables from restart-file (binary format)
	697	! except some informations needed when reading restart data from a previous
[151]	698	! run which used a smaller total domain or/and a different domain decomposition.
[147]	699	!------------------------------------------------------------------------------!
	700
[151]	701	USE arrays_3d
[147]	702	USE control_parameters
	703	USE indices
	704	USE pegrid
	705	USE statistics
	706
	707	IMPLICIT NONE
	708
	709	CHARACTER (LEN=10) :: version_on_file
	710	CHARACTER (LEN=30) :: variable_chr
[626]	711	CHARACTER (LEN=1) :: cdum
[147]	712
	713	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	714	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	715
[151]	716	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	717	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	718
	719
	720	CALL check_open( 13 )
	721
	722	WRITE (9,*) 'rpovl: after check open 13'
	723	CALL local_flush( 9 )
	724	READ ( 13 ) version_on_file
	725
	726	!
	727	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	728	!-- run
	729	READ ( 13 ) variable_chr
	730	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	731	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	732	'run on PE ', myid
[257]	733	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	734	ENDIF
	735	READ ( 13 ) numprocs_previous_run
	736
	737	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	738	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	739	ENDIF
	740
	741	READ ( 13 ) variable_chr
	742	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	743	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	744	'prior run on PE ', myid
	745	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	746	ENDIF
	747	READ ( 13 ) hor_index_bounds_previous_run
	748
	749	!
	750	!-- Read vertical number of gridpoints and number of different areas used
	751	!-- for computing statistics. Allocate arrays depending on these values,
	752	!-- which are needed for the following read instructions.
	753	READ ( 13 ) variable_chr
	754	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	755	message_string = 'nz not found in restart data file'
	756	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	757	ENDIF
	758	READ ( 13 ) nz_on_file
	759	IF ( nz_on_file /= nz ) THEN
[257]	760	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	761	'gridpoints along z', &
	762	'&nz on file = "', nz_on_file, '"', &
	763	'&nz from run = "', nz, '"'
[257]	764	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	765	ENDIF
	766
	767	READ ( 13 ) variable_chr
	768	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	769	message_string = 'max_pr_user not found in restart data file'
	770	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	771	ENDIF
	772	READ ( 13 ) max_pr_user_on_file
[170]	773	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	774	WRITE( message_string, * ) 'number of user profiles on res', &
	775	'tart data file differs from the current ', &
	776	'run&max_pr_user on file = "', &
	777	max_pr_user_on_file, '"', &
	778	'&max_pr_user from run = "', &
[257]	779	max_pr_user, '"'
	780	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	781	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	782	ELSE
	783	tmp_mpru = max_pr_user
[147]	784	ENDIF
	785
	786	READ ( 13 ) variable_chr
	787	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	788	message_string = 'statistic_regions not found in restart data file'
	789	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	790	ENDIF
	791	READ ( 13 ) statistic_regions_on_file
[173]	792	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	793	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	794	'differ from the current run', &
	795	'&statistic regions on file = "', &
	796	statistic_regions_on_file, '"', &
	797	'&statistic regions from run = "', &
	798	statistic_regions, '"', &
[257]	799	'&statistic data may be lost!'
	800	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	801	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	802	ELSE
	803	tmp_sr = statistic_regions
[147]	804	ENDIF
	805
	806
	807	!
	808	!-- Now read and check some control parameters and skip the rest
	809	WRITE (9,*) 'wpovl: begin reading variables'
	810	CALL local_flush( 9 )
	811	READ ( 13 ) variable_chr
	812
	813	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	814
	815	SELECT CASE ( TRIM( variable_chr ) )
	816
[151]	817	CASE ( 'average_count_pr' )
	818	READ ( 13 ) average_count_pr
[257]	819	IF ( average_count_pr /= 0 ) THEN
[274]	820	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	821	'averaged. &Averaging will be done now using ', &
	822	average_count_pr, ' samples.'
	823	CALL message( 'read_parts_of_var_list', 'PA0309', &
	824	0, 1, 0, 6, 0 )
[151]	825	ENDIF
	826
[147]	827	CASE ( 'hom' )
	828	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	829	0:statistic_regions_on_file) )
	830	READ ( 13 ) hom_on_file
[170]	831	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	832	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	833	DEALLOCATE( hom_on_file )
	834
[151]	835	CASE ( 'hom_sum' )
	836	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	837	0:statistic_regions_on_file) )
	838	READ ( 13 ) hom_sum_on_file
[170]	839	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	840	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	841	DEALLOCATE( hom_sum_on_file )
	842
[147]	843	CASE ( 'nx' )
	844	READ ( 13 ) nx_on_file
	845
	846	CASE ( 'ny' )
	847	READ ( 13 ) ny_on_file
	848
	849
	850	CASE DEFAULT
	851
[626]	852	READ ( 13 ) cdum
[147]	853
	854	END SELECT
	855
	856	READ ( 13 ) variable_chr
	857
	858	ENDDO
	859
[151]	860	!
	861	!-- Calculate the temporal average of vertical profiles, if neccessary
	862	IF ( average_count_pr /= 0 ) THEN
	863	hom_sum = hom_sum / REAL( average_count_pr )
	864	ENDIF
[147]	865
[151]	866
[147]	867	END SUBROUTINE read_parts_of_var_list
	868
	869
	870
[146]	871	SUBROUTINE skip_var_list
	872
	873	!------------------------------------------------------------------------------!
	874	! Description:
	875	! ------------
	876	! Skipping the global control variables from restart-file (binary format)
	877	!------------------------------------------------------------------------------!
	878
[147]	879	IMPLICIT NONE
	880
[146]	881	CHARACTER (LEN=10) :: version_on_file
	882	CHARACTER (LEN=30) :: variable_chr
	883
[600]	884	CHARACTER (LEN=1) :: cdum
[146]	885
	886
[147]	887	WRITE (9,*) 'skipvl #1'
	888	CALL local_flush( 9 )
[146]	889	READ ( 13 ) version_on_file
	890
[147]	891	WRITE (9,*) 'skipvl before variable_chr'
	892	CALL local_flush( 9 )
[146]	893	READ ( 13 ) variable_chr
[147]	894	WRITE (9,*) 'skipvl after variable_chr'
	895	CALL local_flush( 9 )
[146]	896
	897	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	898
[147]	899	WRITE (9,*) 'skipvl chr = ', variable_chr
	900	CALL local_flush( 9 )
[600]	901	READ ( 13 ) cdum
[146]	902	READ ( 13 ) variable_chr
	903
	904	ENDDO
[147]	905	WRITE (9,*) 'skipvl last'
	906	CALL local_flush( 9 )
[146]	907
	908
	909	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |