Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 712

Last change on this file since 712 was 627, checked in by suehring, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 33.0 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[622]	5	! ------------------
[627]	6	!
[601]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: read_var_list.f90 627 2010-12-10 13:07:59Z raasch $
	11	!
[627]	12	! 626 2010-12-10 13:04:12Z suehring
	13	! idum replaced by cdum in read_parts_of_var_list
	14	!
[623]	15	! 622 2010-12-10 08:08:13Z raasch
	16	! +collective_wait
	17	!
[601]	18	! 600 2010-11-24 16:10:51Z raasch
[600]	19	! +call_psolver_at_all_substeps, cfl_factor, cycle_mg, mg_cycles,
	20	! mg_switch_to_pe0_level, ngsrb, nsor, omega_sor, psolver,
	21	! rayleigh_damping_factor, rayleigh_damping_height, residual_limit
	22	! in routine skip_var_list (end of this file), variable ldum is replaced
	23	! by cdum(LEN=1), because otherwise read errors (too few data on file)
	24	! appear due to one of the additional parameters (cycle_mg) which are now
	25	! stored on the restart file
[392]	26	!
[592]	27	! 591 2010-10-28 06:35:52Z helmke
	28	! remove print command
	29	!
[588]	30	! 587 2010-10-27 08:36:51Z helmke
	31	! +time_domask
	32	!
[581]	33	! 580 2010-10-05 13:59:11Z heinze
	34	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	35	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	36	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	37	!
[482]	38	! 411 2009-12-11 14:15:58Z heinze
	39	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	40	! ws_vertical_gradient_level_ind
	41	!
[392]	42	! 345 2009-07-01 14:37:56Z heinze
[345]	43	! +output_for_t0
[336]	44	! dt_fixed is read into a dummy variable.
[257]	45	! Output of messages replaced by message handling routine.
[240]	46	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	47	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	48	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	49	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	50	!
[226]	51	! 216 2008-11-25 07:12:43Z raasch
	52	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	53	!
[198]	54	! 173 2008-05-23 20:39:38Z raasch
[153]	55	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	56	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	57	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	58	! recycling_width, turbulent_inflow,
[145]	59	! -cross_ts_*, npex, npey,
	60	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	61	! read_3d_binary to here,
[147]	62	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	63	!
[139]	64	! 138 2007-11-28 10:03:58Z letzel
	65	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	66	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	67	! plant_canopy, time_sort_particles
	68	!
[110]	69	! 102 2007-07-27 09:09:17Z raasch
	70	! +time_coupling, top_momentumflux_u\|v
	71	!
[98]	72	! 95 2007-06-02 16:48:38Z raasch
	73	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	74	! sa_vertical_gradient_level, bottom/top_salinity_flux
	75	!
[90]	76	! 87 2007-05-22 15:46:47Z raasch
	77	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	78	!
[77]	79	! 75 2007-03-22 09:54:05Z raasch
	80	! +loop_optimization, pt_reference, moisture renamed humidity
	81	!
[39]	82	! 20 2007-02-26 00:12:32Z raasch
	83	! +top_heatflux, use_top_fluxes
	84	!
[3]	85	! RCS Log replace by Id keyword, revision history cleaned up
	86	!
[1]	87	! Revision 1.34 2006/08/22 14:14:27 raasch
	88	! +dz_max
	89	!
	90	! Revision 1.1 1998/03/18 20:18:48 raasch
	91	! Initial revision
	92	!
	93	!
	94	! Description:
	95	! ------------
[143]	96	! Reading values of global control variables from restart-file (binary format)
[1]	97	!------------------------------------------------------------------------------!
	98
	99	USE arrays_3d
	100	USE averaging
[87]	101	USE control_parameters
[1]	102	USE grid_variables
	103	USE indices
	104	USE model_1d
[345]	105	USE netcdf_control
[116]	106	USE particle_attributes
[1]	107	USE pegrid
	108	USE profil_parameter
	109	USE statistics
	110
	111	IMPLICIT NONE
	112
	113	CHARACTER (LEN=10) :: binary_version, version_on_file
	114	CHARACTER (LEN=30) :: variable_chr
[87]	115
[336]	116	LOGICAL :: ldum
[143]	117
[336]	118
[1]	119	CALL check_open( 13 )
	120
	121	!
	122	!-- Make version number check first
	123	READ ( 13 ) version_on_file
[600]	124	binary_version = '3.5'
[1]	125	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	126	WRITE( message_string, * ) 'version mismatch concerning control ', &
	127	'variables', &
	128	'&version on file = "', &
	129	TRIM( version_on_file ), '"', &
	130	'&version on program = "', &
	131	TRIM( binary_version ), '"'
	132	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	133	ENDIF
	134
	135	!
[145]	136	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	137	!-- run
	138	READ ( 13 ) variable_chr
	139	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	140	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	141	'run on PE ', myid
[257]	142	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	143	ENDIF
	144	READ ( 13 ) numprocs_previous_run
	145
[146]	146	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	147	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	148	ENDIF
[145]	149
	150	READ ( 13 ) variable_chr
	151	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	152	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	153	'prior run on PE ', myid
	154	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	155	ENDIF
	156	READ ( 13 ) hor_index_bounds_previous_run
	157
	158	!
[1]	159	!-- Read vertical number of gridpoints and number of different areas used
	160	!-- for computing statistics. Allocate arrays depending on these values,
	161	!-- which are needed for the following read instructions.
	162	READ ( 13 ) variable_chr
	163	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	164	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	165	myid
	166	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	167	ENDIF
	168	READ ( 13 ) nz
[87]	169
[1]	170	READ ( 13 ) variable_chr
[87]	171	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	172	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	173	'prior run on PE ', myid
[257]	174	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	175	ENDIF
[159]	176	READ ( 13 ) max_pr_user ! This value is checked against the number of
	177	! user profiles given for the current run
	178	! in routine user_parin (it has to match)
[87]	179
	180	READ ( 13 ) variable_chr
[1]	181	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	182	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	183	'prior run on PE ', myid
[257]	184	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	185	ENDIF
	186	READ ( 13 ) statistic_regions
[146]	187	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	188	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	189	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	190	sa_init(0:nz+1), &
[146]	191	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	192	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	193	ENDIF
[1]	194
	195	!
	196	!-- Now read all control parameters:
	197	!-- Caution: When the following read instructions have been changed, the
	198	!-- ------- version number stored in the variable binary_version has to be
	199	!-- increased. The same changes must also be done in write_var_list.
	200	READ ( 13 ) variable_chr
	201	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	202
	203	SELECT CASE ( TRIM( variable_chr ) )
	204
	205	CASE ( 'adjust_mixing_length' )
	206	READ ( 13 ) adjust_mixing_length
	207	CASE ( 'advected_distance_x' )
	208	READ ( 13 ) advected_distance_x
	209	CASE ( 'advected_distance_y' )
	210	READ ( 13 ) advected_distance_y
	211	CASE ( 'alpha_surface' )
	212	READ ( 13 ) alpha_surface
	213	CASE ( 'average_count_pr' )
	214	READ ( 13 ) average_count_pr
	215	CASE ( 'average_count_sp' )
	216	READ ( 13 ) average_count_sp
	217	CASE ( 'average_count_3d' )
	218	READ ( 13 ) average_count_3d
	219	CASE ( 'bc_e_b' )
	220	READ ( 13 ) bc_e_b
	221	CASE ( 'bc_lr' )
	222	READ ( 13 ) bc_lr
	223	CASE ( 'bc_ns' )
	224	READ ( 13 ) bc_ns
	225	CASE ( 'bc_p_b' )
	226	READ ( 13 ) bc_p_b
	227	CASE ( 'bc_p_t' )
	228	READ ( 13 ) bc_p_t
	229	CASE ( 'bc_pt_b' )
	230	READ ( 13 ) bc_pt_b
	231	CASE ( 'bc_pt_t' )
	232	READ ( 13 ) bc_pt_t
	233	CASE ( 'bc_pt_t_val' )
	234	READ ( 13 ) bc_pt_t_val
	235	CASE ( 'bc_q_b' )
	236	READ ( 13 ) bc_q_b
	237	CASE ( 'bc_q_t' )
	238	READ ( 13 ) bc_q_t
	239	CASE ( 'bc_q_t_val' )
	240	READ ( 13 ) bc_q_t_val
	241	CASE ( 'bc_s_b' )
	242	READ ( 13 ) bc_s_b
	243	CASE ( 'bc_s_t' )
	244	READ ( 13 ) bc_s_t
[95]	245	CASE ( 'bc_sa_t' )
	246	READ ( 13 ) bc_sa_t
[1]	247	CASE ( 'bc_uv_b' )
	248	READ ( 13 ) bc_uv_b
	249	CASE ( 'bc_uv_t' )
	250	READ ( 13 ) bc_uv_t
[95]	251	CASE ( 'bottom_salinityflux' )
	252	READ ( 13 ) bottom_salinityflux
[1]	253	CASE ( 'building_height' )
	254	READ ( 13 ) building_height
	255	CASE ( 'building_length_x' )
	256	READ ( 13 ) building_length_x
	257	CASE ( 'building_length_y' )
	258	READ ( 13 ) building_length_y
	259	CASE ( 'building_wall_left' )
	260	READ ( 13 ) building_wall_left
	261	CASE ( 'building_wall_south' )
	262	READ ( 13 ) building_wall_south
[600]	263	CASE ( 'call_psolver_at_all_substeps' )
	264	READ ( 13 ) call_psolver_at_all_substeps
[138]	265	CASE ( 'canopy_mode' )
	266	READ ( 13 ) canopy_mode
[240]	267	CASE ( 'canyon_height' )
	268	READ ( 13 ) canyon_height
	269	CASE ( 'canyon_width_x' )
	270	READ ( 13 ) canyon_width_x
	271	CASE ( 'canyon_width_y' )
	272	READ ( 13 ) canyon_width_y
	273	CASE ( 'canyon_wall_left' )
	274	READ ( 13 ) canyon_wall_left
	275	CASE ( 'canyon_wall_south' )
	276	READ ( 13 ) canyon_wall_south
[600]	277	CASE ( 'cfl_factor' )
	278	READ ( 13 ) cfl_factor
[1]	279	CASE ( 'cloud_droplets' )
	280	READ ( 13 ) cloud_droplets
	281	CASE ( 'cloud_physics' )
	282	READ ( 13 ) cloud_physics
[622]	283	CASE ( 'collective_wait' )
	284	READ ( 13 ) collective_wait
[1]	285	CASE ( 'conserve_volume_flow' )
	286	READ ( 13 ) conserve_volume_flow
[241]	287	CASE ( 'conserve_volume_flow_mode' )
	288	READ ( 13 ) conserve_volume_flow_mode
[291]	289	CASE ( 'coupling_start_time' )
	290	READ ( 13 ) coupling_start_time
[153]	291	CASE ( 'cthf' )
	292	READ ( 13 ) cthf
[1]	293	CASE ( 'current_timestep_number' )
	294	READ ( 13 ) current_timestep_number
	295	CASE ( 'cut_spline_overshoot' )
	296	READ ( 13 ) cut_spline_overshoot
[600]	297	CASE ( 'cycle_mg' )
	298	READ ( 13 ) cycle_mg
[1]	299	CASE ( 'damp_level_1d' )
	300	READ ( 13 ) damp_level_1d
	301	CASE ( 'dissipation_1d' )
	302	READ ( 13 ) dissipation_1d
[240]	303	CASE ( 'dp_external' )
	304	READ ( 13 ) dp_external
	305	CASE ( 'dp_level_b' )
	306	READ ( 13 ) dp_level_b
	307	CASE ( 'dp_smooth' )
	308	READ ( 13 ) dp_smooth
	309	CASE ( 'dpdxy' )
	310	READ ( 13 ) dpdxy
[138]	311	CASE ( 'drag_coefficient' )
	312	READ ( 13 ) drag_coefficient
[1]	313	CASE ( 'dt_fixed' )
[336]	314	READ ( 13 ) ldum ! restart files created before rev 333
	315	! contained dt_fixed by mistake; it is still
	316	! read here in order to allow usage of these
	317	! older restart files; can be removed in a
	318	! later version
[1]	319	CASE ( 'dt_pr_1d' )
	320	READ ( 13 ) dt_pr_1d
	321	CASE ( 'dt_run_control_1d' )
	322	READ ( 13 ) dt_run_control_1d
	323	CASE ( 'dt_3d' )
	324	READ ( 13 ) dt_3d
	325	CASE ( 'dvrp_filecount' )
	326	READ ( 13 ) dvrp_filecount
	327	CASE ( 'dx' )
	328	READ ( 13 ) dx
	329	CASE ( 'dy' )
	330	READ ( 13 ) dy
	331	CASE ( 'dz' )
	332	READ ( 13 ) dz
	333	CASE ( 'dz_max' )
	334	READ ( 13 ) dz_max
	335	CASE ( 'dz_stretch_factor' )
	336	READ ( 13 ) dz_stretch_factor
	337	CASE ( 'dz_stretch_level' )
	338	READ ( 13 ) dz_stretch_level
	339	CASE ( 'e_min' )
	340	READ ( 13 ) e_min
	341	CASE ( 'end_time_1d' )
	342	READ ( 13 ) end_time_1d
	343	CASE ( 'fft_method' )
	344	READ ( 13 ) fft_method
	345	CASE ( 'first_call_advec_particles' )
	346	READ ( 13 ) first_call_advec_particles
	347	CASE ( 'galilei_transformation' )
	348	READ ( 13 ) galilei_transformation
	349	CASE ( 'grid_matching' )
	350	READ ( 13 ) grid_matching
	351	CASE ( 'hom' )
	352	READ ( 13 ) hom
[143]	353	CASE ( 'hom_sum' )
	354	READ ( 13 ) hom_sum
[151]	355	CASE ( 'humidity' )
	356	READ ( 13 ) humidity
	357	CASE ( 'inflow_damping_factor' )
	358	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	359	ALLOCATE( inflow_damping_factor(0:nz+1) )
	360	ENDIF
	361	READ ( 13 ) inflow_damping_factor
	362	CASE ( 'inflow_damping_height' )
	363	READ ( 13 ) inflow_damping_height
	364	CASE ( 'inflow_damping_width' )
	365	READ ( 13 ) inflow_damping_width
[1]	366	CASE ( 'inflow_disturbance_begin' )
	367	READ ( 13 ) inflow_disturbance_begin
	368	CASE ( 'inflow_disturbance_end' )
	369	READ ( 13 ) inflow_disturbance_end
	370	CASE ( 'km_constant' )
	371	READ ( 13 ) km_constant
	372	CASE ( 'km_damp_max' )
	373	READ ( 13 ) km_damp_max
[138]	374	CASE ( 'lad' )
	375	READ ( 13 ) lad
	376	CASE ( 'lad_surface' )
	377	READ ( 13 ) lad_surface
	378	CASE ( 'lad_vertical_gradient' )
	379	READ ( 13 ) lad_vertical_gradient
	380	CASE ( 'lad_vertical_gradient_level' )
	381	READ ( 13 ) lad_vertical_gradient_level
	382	CASE ( 'lad_vertical_gradient_level_in' )
	383	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	384	CASE ( 'last_dt_change' )
	385	READ ( 13 ) last_dt_change
[411]	386	CASE ( 'large_scale_subsidence' )
	387	READ ( 13 ) large_scale_subsidence
[153]	388	CASE ( 'leaf_surface_concentration' )
	389	READ ( 13 ) leaf_surface_concentration
[1]	390	CASE ( 'long_filter_factor' )
	391	READ ( 13 ) long_filter_factor
[63]	392	CASE ( 'loop_optimization' )
	393	READ ( 13 ) loop_optimization
[151]	394	CASE ( 'mean_inflow_profiles' )
	395	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	396	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	397	ENDIF
	398	READ ( 13 ) mean_inflow_profiles
[600]	399	CASE ( 'mg_cycles' )
	400	READ ( 13 ) mg_cycles
	401	CASE ( 'mg_switch_to_pe0_level' )
	402	READ ( 13 ) mg_switch_to_pe0_level
[1]	403	CASE ( 'mixing_length_1d' )
	404	READ ( 13 ) mixing_length_1d
	405	CASE ( 'momentum_advec' )
	406	READ ( 13 ) momentum_advec
	407	CASE ( 'netcdf_precision' )
	408	READ ( 13 ) netcdf_precision
[600]	409	CASE ( 'ngsrb' )
	410	READ ( 13 ) ngsrb
	411	CASE ( 'nsor' )
	412	READ ( 13 ) nsor
[1]	413	CASE ( 'nsor_ini' )
	414	READ ( 13 ) nsor_ini
	415	CASE ( 'nx' )
	416	READ ( 13 ) nx
[147]	417	nx_on_file = nx
[1]	418	CASE ( 'ny' )
	419	READ ( 13 ) ny
[147]	420	ny_on_file = ny
[94]	421	CASE ( 'ocean' )
	422	READ ( 13 ) ocean
[1]	423	CASE ( 'old_dt' )
	424	READ ( 13 ) old_dt
	425	CASE ( 'omega' )
	426	READ ( 13 ) omega
[600]	427	CASE ( 'omega_sor' )
	428	READ ( 13 ) omega_sor
[1]	429	CASE ( 'outflow_damping_width' )
	430	READ ( 13 ) outflow_damping_width
[345]	431	CASE ( 'output_for_t0' )
	432	READ (13) output_for_t0
[1]	433	CASE ( 'overshoot_limit_e' )
	434	READ ( 13 ) overshoot_limit_e
	435	CASE ( 'overshoot_limit_pt' )
	436	READ ( 13 ) overshoot_limit_pt
	437	CASE ( 'overshoot_limit_u' )
	438	READ ( 13 ) overshoot_limit_u
	439	CASE ( 'overshoot_limit_v' )
	440	READ ( 13 ) overshoot_limit_v
	441	CASE ( 'overshoot_limit_w' )
	442	READ ( 13 ) overshoot_limit_w
	443	CASE ( 'passive_scalar' )
	444	READ ( 13 ) passive_scalar
[138]	445	CASE ( 'pch_index' )
	446	READ ( 13 ) pch_index
[1]	447	CASE ( 'phi' )
	448	READ ( 13 ) phi
[138]	449	CASE ( 'plant_canopy' )
	450	READ ( 13 ) plant_canopy
[1]	451	CASE ( 'prandtl_layer' )
	452	READ ( 13 ) prandtl_layer
[600]	453	CASE ( 'prandtl_number' )
	454	READ ( 13 ) prandtl_number
[1]	455	CASE ( 'precipitation' )
	456	READ ( 13 ) precipitation
[600]	457	CASE ( 'psolver' )
	458	READ ( 13 ) psolver
[1]	459	CASE ( 'pt_init' )
	460	READ ( 13 ) pt_init
[57]	461	CASE ( 'pt_reference' )
	462	READ ( 13 ) pt_reference
[1]	463	CASE ( 'pt_surface' )
	464	READ ( 13 ) pt_surface
	465	CASE ( 'pt_surface_initial_change' )
	466	READ ( 13 ) pt_surface_initial_change
	467	CASE ( 'pt_vertical_gradient' )
	468	READ ( 13 ) pt_vertical_gradient
	469	CASE ( 'pt_vertical_gradient_level' )
	470	READ ( 13 ) pt_vertical_gradient_level
	471	CASE ( 'pt_vertical_gradient_level_ind' )
	472	READ ( 13 ) pt_vertical_gradient_level_ind
	473	CASE ( 'q_init' )
	474	READ ( 13 ) q_init
	475	CASE ( 'q_surface' )
	476	READ ( 13 ) q_surface
	477	CASE ( 'q_surface_initial_change' )
	478	READ ( 13 ) q_surface_initial_change
	479	CASE ( 'q_vertical_gradient' )
	480	READ ( 13 ) q_vertical_gradient
	481	CASE ( 'q_vertical_gradient_level' )
	482	READ ( 13 ) q_vertical_gradient_level
	483	CASE ( 'q_vertical_gradient_level_ind' )
	484	READ ( 13 ) q_vertical_gradient_level_ind
	485	CASE ( 'radiation' )
	486	READ ( 13 ) radiation
	487	CASE ( 'random_generator' )
	488	READ ( 13 ) random_generator
	489	CASE ( 'random_heatflux' )
	490	READ ( 13 ) random_heatflux
[600]	491	CASE ( 'rayleigh_damping_factor' )
	492	READ ( 13 ) rayleigh_damping_factor
	493	CASE ( 'rayleigh_damping_height' )
	494	READ ( 13 ) rayleigh_damping_height
[151]	495	CASE ( 'recycling_width' )
	496	READ ( 13 ) recycling_width
[600]	497	CASE ( 'residual_limit' )
	498	READ ( 13 ) residual_limit
[1]	499	CASE ( 'rif_max' )
	500	READ ( 13 ) rif_max
	501	CASE ( 'rif_min' )
	502	READ ( 13 ) rif_min
	503	CASE ( 'roughness_length' )
	504	READ ( 13 ) roughness_length
	505	CASE ( 'runnr' )
	506	READ ( 13 ) runnr
[291]	507	CASE ( 'run_coupled' )
	508	READ ( 13 ) run_coupled
[94]	509	CASE ( 'sa_init' )
	510	READ ( 13 ) sa_init
	511	CASE ( 'sa_surface' )
	512	READ ( 13 ) sa_surface
	513	CASE ( 'sa_vertical_gradient' )
	514	READ ( 13 ) sa_vertical_gradient
	515	CASE ( 'sa_vertical_gradient_level' )
	516	READ ( 13 ) sa_vertical_gradient_level
[1]	517	CASE ( 'scalar_advec' )
	518	READ ( 13 ) scalar_advec
[153]	519	CASE ( 'scalar_exchange_coefficient' )
	520	READ ( 13 ) scalar_exchange_coefficient
[1]	521	CASE ( 'simulated_time' )
	522	READ ( 13 ) simulated_time
	523	CASE ( 'surface_heatflux' )
	524	READ ( 13 ) surface_heatflux
	525	CASE ( 'surface_pressure' )
	526	READ ( 13 ) surface_pressure
	527	CASE ( 'surface_scalarflux' )
	528	READ ( 13 ) surface_scalarflux
	529	CASE ( 'surface_waterflux' )
	530	READ ( 13 ) surface_waterflux
	531	CASE ( 's_surface' )
	532	READ ( 13 ) s_surface
	533	CASE ( 's_surface_initial_change' )
	534	READ ( 13 ) s_surface_initial_change
	535	CASE ( 's_vertical_gradient' )
	536	READ ( 13 ) s_vertical_gradient
	537	CASE ( 's_vertical_gradient_level' )
	538	READ ( 13 ) s_vertical_gradient_level
[102]	539	CASE ( 'time_coupling' )
	540	READ ( 13 ) time_coupling
[1]	541	CASE ( 'time_disturb' )
	542	READ ( 13 ) time_disturb
[587]	543	CASE ( 'time_dopr' )
[1]	544	READ ( 13 ) time_dopr
[587]	545	CASE ( 'time_domask' )
	546	READ ( 13 ) time_domask
[1]	547	CASE ( 'time_dopr_av' )
	548	READ ( 13 ) time_dopr_av
	549	CASE ( 'time_dopr_listing' )
	550	READ ( 13 ) time_dopr_listing
	551	CASE ( 'time_dopts' )
	552	READ ( 13 ) time_dopts
	553	CASE ( 'time_dosp' )
	554	READ ( 13 ) time_dosp
	555	CASE ( 'time_dots' )
	556	READ ( 13 ) time_dots
	557	CASE ( 'time_do2d_xy' )
	558	READ ( 13 ) time_do2d_xy
	559	CASE ( 'time_do2d_xz' )
	560	READ ( 13 ) time_do2d_xz
	561	CASE ( 'time_do2d_yz' )
	562	READ ( 13 ) time_do2d_yz
	563	CASE ( 'time_do3d' )
	564	READ ( 13 ) time_do3d
	565	CASE ( 'time_do_av' )
	566	READ ( 13 ) time_do_av
	567	CASE ( 'time_do_sla' )
	568	READ ( 13 ) time_do_sla
	569	CASE ( 'time_dvrp' )
	570	READ ( 13 ) time_dvrp
	571	CASE ( 'time_restart' )
	572	READ ( 13 ) time_restart
	573	CASE ( 'time_run_control' )
	574	READ ( 13 ) time_run_control
[291]	575	CASE ( 'time_since_reference_point' )
	576	READ ( 13 ) time_since_reference_point
[116]	577	CASE ( 'time_sort_particles' )
	578	READ ( 13 ) time_sort_particles
[1]	579	CASE ( 'timestep_scheme' )
	580	READ ( 13 ) timestep_scheme
	581	CASE ( 'topography' )
	582	READ ( 13 ) topography
[256]	583	CASE ( 'topography_grid_convention' )
	584	READ ( 13 ) topography_grid_convention
[19]	585	CASE ( 'top_heatflux' )
	586	READ ( 13 ) top_heatflux
[102]	587	CASE ( 'top_momentumflux_u' )
	588	READ ( 13 ) top_momentumflux_u
	589	CASE ( 'top_momentumflux_v' )
	590	READ ( 13 ) top_momentumflux_v
[94]	591	CASE ( 'top_salinityflux' )
	592	READ ( 13 ) top_salinityflux
[1]	593	CASE ( 'tsc' )
	594	READ ( 13 ) tsc
[151]	595	CASE ( 'turbulent_inflow' )
	596	READ ( 13 ) turbulent_inflow
[241]	597	CASE ( 'u_bulk' )
	598	READ ( 13 ) u_bulk
[1]	599	CASE ( 'u_init' )
	600	READ ( 13 ) u_init
	601	CASE ( 'u_max' )
	602	READ ( 13 ) u_max
	603	CASE ( 'u_max_ijk' )
	604	READ ( 13 ) u_max_ijk
	605	CASE ( 'ug' )
	606	READ ( 13 ) ug
	607	CASE ( 'ug_surface' )
	608	READ ( 13 ) ug_surface
	609	CASE ( 'ug_vertical_gradient' )
	610	READ ( 13 ) ug_vertical_gradient
	611	CASE ( 'ug_vertical_gradient_level' )
	612	READ ( 13 ) ug_vertical_gradient_level
	613	CASE ( 'ug_vertical_gradient_level_ind' )
	614	READ ( 13 ) ug_vertical_gradient_level_ind
	615	CASE ( 'ups_limit_e' )
	616	READ ( 13 ) ups_limit_e
	617	CASE ( 'ups_limit_pt' )
	618	READ ( 13 ) ups_limit_pt
	619	CASE ( 'ups_limit_u' )
	620	READ ( 13 ) ups_limit_u
	621	CASE ( 'ups_limit_v' )
	622	READ ( 13 ) ups_limit_v
	623	CASE ( 'ups_limit_w' )
	624	READ ( 13 ) ups_limit_w
	625	CASE ( 'use_surface_fluxes' )
	626	READ ( 13 ) use_surface_fluxes
[20]	627	CASE ( 'use_top_fluxes' )
	628	READ ( 13 ) use_top_fluxes
[1]	629	CASE ( 'use_ug_for_galilei_tr' )
	630	READ ( 13 ) use_ug_for_galilei_tr
	631	CASE ( 'use_upstream_for_tke' )
	632	READ ( 13 ) use_upstream_for_tke
[241]	633	CASE ( 'v_bulk' )
	634	READ ( 13 ) v_bulk
[1]	635	CASE ( 'v_init' )
	636	READ ( 13 ) v_init
	637	CASE ( 'v_max' )
	638	READ ( 13 ) v_max
	639	CASE ( 'v_max_ijk' )
	640	READ ( 13 ) v_max_ijk
	641	CASE ( 'vg' )
	642	READ ( 13 ) vg
	643	CASE ( 'vg_surface' )
	644	READ ( 13 ) vg_surface
	645	CASE ( 'vg_vertical_gradient' )
	646	READ ( 13 ) vg_vertical_gradient
	647	CASE ( 'vg_vertical_gradient_level' )
	648	READ ( 13 ) vg_vertical_gradient_level
	649	CASE ( 'vg_vertical_gradient_level_ind' )
	650	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	651	CASE ( 'volume_flow_area' )
	652	READ ( 13 ) volume_flow_area
	653	CASE ( 'volume_flow_initial' )
	654	READ ( 13 ) volume_flow_initial
[1]	655	CASE ( 'wall_adjustment' )
	656	READ ( 13 ) wall_adjustment
[580]	657	CASE ( 'subs_vertical_gradient' )
	658	READ ( 13 ) subs_vertical_gradient
	659	CASE ( 'subs_vertical_gradient_level' )
	660	READ ( 13 ) subs_vertical_gradient_level
	661	CASE ( 'subs_vertical_gradient_level_i' )
	662	READ ( 13 ) subs_vertical_gradient_level_i
[1]	663	CASE ( 'w_max' )
	664	READ ( 13 ) w_max
	665	CASE ( 'w_max_ijk' )
	666	READ ( 13 ) w_max_ijk
	667
	668	CASE DEFAULT
[257]	669	WRITE( message_string, * ) 'unknown variable named "', &
	670	TRIM( variable_chr ), '" found in', &
	671	' data from prior run on PE ', myid
	672	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	673	END SELECT
	674	!
	675	!-- Read next string
	676	READ ( 13 ) variable_chr
	677
	678	ENDDO
	679
	680
[146]	681	END SUBROUTINE read_var_list
[143]	682
[146]	683
	684
[147]	685	SUBROUTINE read_parts_of_var_list
	686
	687	!------------------------------------------------------------------------------!
	688	! Description:
	689	! ------------
	690	! Skipping the global control variables from restart-file (binary format)
	691	! except some informations needed when reading restart data from a previous
[151]	692	! run which used a smaller total domain or/and a different domain decomposition.
[147]	693	!------------------------------------------------------------------------------!
	694
[151]	695	USE arrays_3d
[147]	696	USE control_parameters
	697	USE indices
	698	USE pegrid
	699	USE statistics
	700
	701	IMPLICIT NONE
	702
	703	CHARACTER (LEN=10) :: version_on_file
	704	CHARACTER (LEN=30) :: variable_chr
[626]	705	CHARACTER (LEN=1) :: cdum
[147]	706
	707	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	708	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	709
[151]	710	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	711	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	712
	713
	714	CALL check_open( 13 )
	715
	716	WRITE (9,*) 'rpovl: after check open 13'
	717	CALL local_flush( 9 )
	718	READ ( 13 ) version_on_file
	719
	720	!
	721	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	722	!-- run
	723	READ ( 13 ) variable_chr
	724	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	725	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	726	'run on PE ', myid
[257]	727	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	728	ENDIF
	729	READ ( 13 ) numprocs_previous_run
	730
	731	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	732	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	733	ENDIF
	734
	735	READ ( 13 ) variable_chr
	736	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	737	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	738	'prior run on PE ', myid
	739	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	740	ENDIF
	741	READ ( 13 ) hor_index_bounds_previous_run
	742
	743	!
	744	!-- Read vertical number of gridpoints and number of different areas used
	745	!-- for computing statistics. Allocate arrays depending on these values,
	746	!-- which are needed for the following read instructions.
	747	READ ( 13 ) variable_chr
	748	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	749	message_string = 'nz not found in restart data file'
	750	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	751	ENDIF
	752	READ ( 13 ) nz_on_file
	753	IF ( nz_on_file /= nz ) THEN
[257]	754	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	755	'gridpoints along z', &
	756	'&nz on file = "', nz_on_file, '"', &
	757	'&nz from run = "', nz, '"'
[257]	758	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	759	ENDIF
	760
	761	READ ( 13 ) variable_chr
	762	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	763	message_string = 'max_pr_user not found in restart data file'
	764	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	765	ENDIF
	766	READ ( 13 ) max_pr_user_on_file
[170]	767	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	768	WRITE( message_string, * ) 'number of user profiles on res', &
	769	'tart data file differs from the current ', &
	770	'run&max_pr_user on file = "', &
	771	max_pr_user_on_file, '"', &
	772	'&max_pr_user from run = "', &
[257]	773	max_pr_user, '"'
	774	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	775	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	776	ELSE
	777	tmp_mpru = max_pr_user
[147]	778	ENDIF
	779
	780	READ ( 13 ) variable_chr
	781	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	782	message_string = 'statistic_regions not found in restart data file'
	783	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	784	ENDIF
	785	READ ( 13 ) statistic_regions_on_file
[173]	786	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	787	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	788	'differ from the current run', &
	789	'&statistic regions on file = "', &
	790	statistic_regions_on_file, '"', &
	791	'&statistic regions from run = "', &
	792	statistic_regions, '"', &
[257]	793	'&statistic data may be lost!'
	794	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	795	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	796	ELSE
	797	tmp_sr = statistic_regions
[147]	798	ENDIF
	799
	800
	801	!
	802	!-- Now read and check some control parameters and skip the rest
	803	WRITE (9,*) 'wpovl: begin reading variables'
	804	CALL local_flush( 9 )
	805	READ ( 13 ) variable_chr
	806
	807	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	808
	809	SELECT CASE ( TRIM( variable_chr ) )
	810
[151]	811	CASE ( 'average_count_pr' )
	812	READ ( 13 ) average_count_pr
[257]	813	IF ( average_count_pr /= 0 ) THEN
[274]	814	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	815	'averaged. &Averaging will be done now using ', &
	816	average_count_pr, ' samples.'
	817	CALL message( 'read_parts_of_var_list', 'PA0309', &
	818	0, 1, 0, 6, 0 )
[151]	819	ENDIF
	820
[147]	821	CASE ( 'hom' )
	822	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	823	0:statistic_regions_on_file) )
	824	READ ( 13 ) hom_on_file
[170]	825	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	826	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	827	DEALLOCATE( hom_on_file )
	828
[151]	829	CASE ( 'hom_sum' )
	830	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	831	0:statistic_regions_on_file) )
	832	READ ( 13 ) hom_sum_on_file
[170]	833	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	834	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	835	DEALLOCATE( hom_sum_on_file )
	836
[147]	837	CASE ( 'nx' )
	838	READ ( 13 ) nx_on_file
	839
	840	CASE ( 'ny' )
	841	READ ( 13 ) ny_on_file
	842
	843
	844	CASE DEFAULT
	845
[626]	846	READ ( 13 ) cdum
[147]	847
	848	END SELECT
	849
	850	READ ( 13 ) variable_chr
	851
	852	ENDDO
	853
[151]	854	!
	855	!-- Calculate the temporal average of vertical profiles, if neccessary
	856	IF ( average_count_pr /= 0 ) THEN
	857	hom_sum = hom_sum / REAL( average_count_pr )
	858	ENDIF
[147]	859
[151]	860
[147]	861	END SUBROUTINE read_parts_of_var_list
	862
	863
	864
[146]	865	SUBROUTINE skip_var_list
	866
	867	!------------------------------------------------------------------------------!
	868	! Description:
	869	! ------------
	870	! Skipping the global control variables from restart-file (binary format)
	871	!------------------------------------------------------------------------------!
	872
[147]	873	IMPLICIT NONE
	874
[146]	875	CHARACTER (LEN=10) :: version_on_file
	876	CHARACTER (LEN=30) :: variable_chr
	877
[600]	878	CHARACTER (LEN=1) :: cdum
[146]	879
	880
[147]	881	WRITE (9,*) 'skipvl #1'
	882	CALL local_flush( 9 )
[146]	883	READ ( 13 ) version_on_file
	884
[147]	885	WRITE (9,*) 'skipvl before variable_chr'
	886	CALL local_flush( 9 )
[146]	887	READ ( 13 ) variable_chr
[147]	888	WRITE (9,*) 'skipvl after variable_chr'
	889	CALL local_flush( 9 )
[146]	890
	891	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	892
[147]	893	WRITE (9,*) 'skipvl chr = ', variable_chr
	894	CALL local_flush( 9 )
[600]	895	READ ( 13 ) cdum
[146]	896	READ ( 13 ) variable_chr
	897
	898	ENDDO
[147]	899	WRITE (9,*) 'skipvl last'
	900	CALL local_flush( 9 )
[146]	901
	902
	903	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |