Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 590

Last change on this file since 590 was 588, checked in by helmke, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 31.3 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[1]	5	! -----------------
[588]	6	!
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: read_var_list.f90 588 2010-10-27 08:48:23Z heinze $
	11	!
[588]	12	! 587 2010-10-27 08:36:51Z helmke
	13	! +time_domask
	14	!
[581]	15	! 580 2010-10-05 13:59:11Z heinze
	16	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	17	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	18	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	19	!
[482]	20	! 411 2009-12-11 14:15:58Z heinze
	21	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	22	! ws_vertical_gradient_level_ind
	23	!
[392]	24	! 345 2009-07-01 14:37:56Z heinze
[345]	25	! +output_for_t0
[336]	26	! dt_fixed is read into a dummy variable.
[257]	27	! Output of messages replaced by message handling routine.
[240]	28	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	29	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	30	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	31	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	32	!
[226]	33	! 216 2008-11-25 07:12:43Z raasch
	34	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	35	!
[198]	36	! 173 2008-05-23 20:39:38Z raasch
[153]	37	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	38	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	39	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	40	! recycling_width, turbulent_inflow,
[145]	41	! -cross_ts_*, npex, npey,
	42	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	43	! read_3d_binary to here,
[147]	44	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	45	!
[139]	46	! 138 2007-11-28 10:03:58Z letzel
	47	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	48	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	49	! plant_canopy, time_sort_particles
	50	!
[110]	51	! 102 2007-07-27 09:09:17Z raasch
	52	! +time_coupling, top_momentumflux_u\|v
	53	!
[98]	54	! 95 2007-06-02 16:48:38Z raasch
	55	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	56	! sa_vertical_gradient_level, bottom/top_salinity_flux
	57	!
[90]	58	! 87 2007-05-22 15:46:47Z raasch
	59	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	60	!
[77]	61	! 75 2007-03-22 09:54:05Z raasch
	62	! +loop_optimization, pt_reference, moisture renamed humidity
	63	!
[39]	64	! 20 2007-02-26 00:12:32Z raasch
	65	! +top_heatflux, use_top_fluxes
	66	!
[3]	67	! RCS Log replace by Id keyword, revision history cleaned up
	68	!
[1]	69	! Revision 1.34 2006/08/22 14:14:27 raasch
	70	! +dz_max
	71	!
	72	! Revision 1.1 1998/03/18 20:18:48 raasch
	73	! Initial revision
	74	!
	75	!
	76	! Description:
	77	! ------------
[143]	78	! Reading values of global control variables from restart-file (binary format)
[1]	79	!------------------------------------------------------------------------------!
	80
	81	USE arrays_3d
	82	USE averaging
[87]	83	USE control_parameters
[1]	84	USE grid_variables
	85	USE indices
	86	USE model_1d
[345]	87	USE netcdf_control
[116]	88	USE particle_attributes
[1]	89	USE pegrid
	90	USE profil_parameter
	91	USE statistics
	92
	93	IMPLICIT NONE
	94
	95	CHARACTER (LEN=10) :: binary_version, version_on_file
	96	CHARACTER (LEN=30) :: variable_chr
[87]	97
[336]	98	LOGICAL :: ldum
[143]	99
[336]	100
[1]	101	CALL check_open( 13 )
	102
	103	!
	104	!-- Make version number check first
	105	READ ( 13 ) version_on_file
[241]	106	binary_version = '3.4'
[1]	107	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	108	WRITE( message_string, * ) 'version mismatch concerning control ', &
	109	'variables', &
	110	'&version on file = "', &
	111	TRIM( version_on_file ), '"', &
	112	'&version on program = "', &
	113	TRIM( binary_version ), '"'
	114	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	115	ENDIF
	116
	117	!
[145]	118	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	119	!-- run
	120	READ ( 13 ) variable_chr
	121	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	122	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	123	'run on PE ', myid
[257]	124	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	125	ENDIF
	126	READ ( 13 ) numprocs_previous_run
	127
[146]	128	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	129	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	130	ENDIF
[145]	131
	132	READ ( 13 ) variable_chr
	133	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	134	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	135	'prior run on PE ', myid
	136	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	137	ENDIF
	138	READ ( 13 ) hor_index_bounds_previous_run
	139
	140	!
[1]	141	!-- Read vertical number of gridpoints and number of different areas used
	142	!-- for computing statistics. Allocate arrays depending on these values,
	143	!-- which are needed for the following read instructions.
	144	READ ( 13 ) variable_chr
	145	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	146	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	147	myid
	148	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	149	ENDIF
	150	READ ( 13 ) nz
[87]	151
[1]	152	READ ( 13 ) variable_chr
[87]	153	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	154	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	155	'prior run on PE ', myid
[257]	156	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	157	ENDIF
[159]	158	READ ( 13 ) max_pr_user ! This value is checked against the number of
	159	! user profiles given for the current run
	160	! in routine user_parin (it has to match)
[87]	161
	162	READ ( 13 ) variable_chr
[1]	163	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	164	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	165	'prior run on PE ', myid
[257]	166	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	167	ENDIF
	168	READ ( 13 ) statistic_regions
[146]	169	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	170	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	171	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	172	sa_init(0:nz+1), &
[146]	173	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	174	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	175	ENDIF
[1]	176
	177	!
	178	!-- Now read all control parameters:
	179	!-- Caution: When the following read instructions have been changed, the
	180	!-- ------- version number stored in the variable binary_version has to be
	181	!-- increased. The same changes must also be done in write_var_list.
	182	READ ( 13 ) variable_chr
	183	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
[587]	184
	185	IF(myid == 0)PRINT*,'read_var_list: variable_chr=',variable_chr
[1]	186
	187	SELECT CASE ( TRIM( variable_chr ) )
	188
	189	CASE ( 'adjust_mixing_length' )
	190	READ ( 13 ) adjust_mixing_length
	191	CASE ( 'advected_distance_x' )
	192	READ ( 13 ) advected_distance_x
	193	CASE ( 'advected_distance_y' )
	194	READ ( 13 ) advected_distance_y
	195	CASE ( 'alpha_surface' )
	196	READ ( 13 ) alpha_surface
	197	CASE ( 'average_count_pr' )
	198	READ ( 13 ) average_count_pr
	199	CASE ( 'average_count_sp' )
	200	READ ( 13 ) average_count_sp
	201	CASE ( 'average_count_3d' )
	202	READ ( 13 ) average_count_3d
	203	CASE ( 'bc_e_b' )
	204	READ ( 13 ) bc_e_b
	205	CASE ( 'bc_lr' )
	206	READ ( 13 ) bc_lr
	207	CASE ( 'bc_ns' )
	208	READ ( 13 ) bc_ns
	209	CASE ( 'bc_p_b' )
	210	READ ( 13 ) bc_p_b
	211	CASE ( 'bc_p_t' )
	212	READ ( 13 ) bc_p_t
	213	CASE ( 'bc_pt_b' )
	214	READ ( 13 ) bc_pt_b
	215	CASE ( 'bc_pt_t' )
	216	READ ( 13 ) bc_pt_t
	217	CASE ( 'bc_pt_t_val' )
	218	READ ( 13 ) bc_pt_t_val
	219	CASE ( 'bc_q_b' )
	220	READ ( 13 ) bc_q_b
	221	CASE ( 'bc_q_t' )
	222	READ ( 13 ) bc_q_t
	223	CASE ( 'bc_q_t_val' )
	224	READ ( 13 ) bc_q_t_val
	225	CASE ( 'bc_s_b' )
	226	READ ( 13 ) bc_s_b
	227	CASE ( 'bc_s_t' )
	228	READ ( 13 ) bc_s_t
[95]	229	CASE ( 'bc_sa_t' )
	230	READ ( 13 ) bc_sa_t
[1]	231	CASE ( 'bc_uv_b' )
	232	READ ( 13 ) bc_uv_b
	233	CASE ( 'bc_uv_t' )
	234	READ ( 13 ) bc_uv_t
[95]	235	CASE ( 'bottom_salinityflux' )
	236	READ ( 13 ) bottom_salinityflux
[1]	237	CASE ( 'building_height' )
	238	READ ( 13 ) building_height
	239	CASE ( 'building_length_x' )
	240	READ ( 13 ) building_length_x
	241	CASE ( 'building_length_y' )
	242	READ ( 13 ) building_length_y
	243	CASE ( 'building_wall_left' )
	244	READ ( 13 ) building_wall_left
	245	CASE ( 'building_wall_south' )
	246	READ ( 13 ) building_wall_south
[138]	247	CASE ( 'canopy_mode' )
	248	READ ( 13 ) canopy_mode
[240]	249	CASE ( 'canyon_height' )
	250	READ ( 13 ) canyon_height
	251	CASE ( 'canyon_width_x' )
	252	READ ( 13 ) canyon_width_x
	253	CASE ( 'canyon_width_y' )
	254	READ ( 13 ) canyon_width_y
	255	CASE ( 'canyon_wall_left' )
	256	READ ( 13 ) canyon_wall_left
	257	CASE ( 'canyon_wall_south' )
	258	READ ( 13 ) canyon_wall_south
[1]	259	CASE ( 'cloud_droplets' )
	260	READ ( 13 ) cloud_droplets
	261	CASE ( 'cloud_physics' )
	262	READ ( 13 ) cloud_physics
	263	CASE ( 'conserve_volume_flow' )
	264	READ ( 13 ) conserve_volume_flow
[241]	265	CASE ( 'conserve_volume_flow_mode' )
	266	READ ( 13 ) conserve_volume_flow_mode
[291]	267	CASE ( 'coupling_start_time' )
	268	READ ( 13 ) coupling_start_time
[153]	269	CASE ( 'cthf' )
	270	READ ( 13 ) cthf
[1]	271	CASE ( 'current_timestep_number' )
	272	READ ( 13 ) current_timestep_number
	273	CASE ( 'cut_spline_overshoot' )
	274	READ ( 13 ) cut_spline_overshoot
	275	CASE ( 'damp_level_1d' )
	276	READ ( 13 ) damp_level_1d
	277	CASE ( 'dissipation_1d' )
	278	READ ( 13 ) dissipation_1d
[240]	279	CASE ( 'dp_external' )
	280	READ ( 13 ) dp_external
	281	CASE ( 'dp_level_b' )
	282	READ ( 13 ) dp_level_b
	283	CASE ( 'dp_smooth' )
	284	READ ( 13 ) dp_smooth
	285	CASE ( 'dpdxy' )
	286	READ ( 13 ) dpdxy
[138]	287	CASE ( 'drag_coefficient' )
	288	READ ( 13 ) drag_coefficient
[1]	289	CASE ( 'dt_fixed' )
[336]	290	READ ( 13 ) ldum ! restart files created before rev 333
	291	! contained dt_fixed by mistake; it is still
	292	! read here in order to allow usage of these
	293	! older restart files; can be removed in a
	294	! later version
[1]	295	CASE ( 'dt_pr_1d' )
	296	READ ( 13 ) dt_pr_1d
	297	CASE ( 'dt_run_control_1d' )
	298	READ ( 13 ) dt_run_control_1d
	299	CASE ( 'dt_3d' )
	300	READ ( 13 ) dt_3d
	301	CASE ( 'dvrp_filecount' )
	302	READ ( 13 ) dvrp_filecount
	303	CASE ( 'dx' )
	304	READ ( 13 ) dx
	305	CASE ( 'dy' )
	306	READ ( 13 ) dy
	307	CASE ( 'dz' )
	308	READ ( 13 ) dz
	309	CASE ( 'dz_max' )
	310	READ ( 13 ) dz_max
	311	CASE ( 'dz_stretch_factor' )
	312	READ ( 13 ) dz_stretch_factor
	313	CASE ( 'dz_stretch_level' )
	314	READ ( 13 ) dz_stretch_level
	315	CASE ( 'e_min' )
	316	READ ( 13 ) e_min
	317	CASE ( 'end_time_1d' )
	318	READ ( 13 ) end_time_1d
	319	CASE ( 'fft_method' )
	320	READ ( 13 ) fft_method
	321	CASE ( 'first_call_advec_particles' )
	322	READ ( 13 ) first_call_advec_particles
	323	CASE ( 'galilei_transformation' )
	324	READ ( 13 ) galilei_transformation
	325	CASE ( 'grid_matching' )
	326	READ ( 13 ) grid_matching
	327	CASE ( 'hom' )
	328	READ ( 13 ) hom
[143]	329	CASE ( 'hom_sum' )
	330	READ ( 13 ) hom_sum
[151]	331	CASE ( 'humidity' )
	332	READ ( 13 ) humidity
	333	CASE ( 'inflow_damping_factor' )
	334	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	335	ALLOCATE( inflow_damping_factor(0:nz+1) )
	336	ENDIF
	337	READ ( 13 ) inflow_damping_factor
	338	CASE ( 'inflow_damping_height' )
	339	READ ( 13 ) inflow_damping_height
	340	CASE ( 'inflow_damping_width' )
	341	READ ( 13 ) inflow_damping_width
[1]	342	CASE ( 'inflow_disturbance_begin' )
	343	READ ( 13 ) inflow_disturbance_begin
	344	CASE ( 'inflow_disturbance_end' )
	345	READ ( 13 ) inflow_disturbance_end
	346	CASE ( 'km_constant' )
	347	READ ( 13 ) km_constant
	348	CASE ( 'km_damp_max' )
	349	READ ( 13 ) km_damp_max
[138]	350	CASE ( 'lad' )
	351	READ ( 13 ) lad
	352	CASE ( 'lad_surface' )
	353	READ ( 13 ) lad_surface
	354	CASE ( 'lad_vertical_gradient' )
	355	READ ( 13 ) lad_vertical_gradient
	356	CASE ( 'lad_vertical_gradient_level' )
	357	READ ( 13 ) lad_vertical_gradient_level
	358	CASE ( 'lad_vertical_gradient_level_in' )
	359	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	360	CASE ( 'last_dt_change' )
	361	READ ( 13 ) last_dt_change
[411]	362	CASE ( 'large_scale_subsidence' )
	363	READ ( 13 ) large_scale_subsidence
[153]	364	CASE ( 'leaf_surface_concentration' )
	365	READ ( 13 ) leaf_surface_concentration
[1]	366	CASE ( 'long_filter_factor' )
	367	READ ( 13 ) long_filter_factor
[63]	368	CASE ( 'loop_optimization' )
	369	READ ( 13 ) loop_optimization
[151]	370	CASE ( 'mean_inflow_profiles' )
	371	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	372	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	373	ENDIF
	374	READ ( 13 ) mean_inflow_profiles
[1]	375	CASE ( 'mixing_length_1d' )
	376	READ ( 13 ) mixing_length_1d
	377	CASE ( 'momentum_advec' )
	378	READ ( 13 ) momentum_advec
	379	CASE ( 'netcdf_precision' )
	380	READ ( 13 ) netcdf_precision
	381	CASE ( 'nsor_ini' )
	382	READ ( 13 ) nsor_ini
	383	CASE ( 'nx' )
	384	READ ( 13 ) nx
[147]	385	nx_on_file = nx
[1]	386	CASE ( 'ny' )
	387	READ ( 13 ) ny
[147]	388	ny_on_file = ny
[94]	389	CASE ( 'ocean' )
	390	READ ( 13 ) ocean
[1]	391	CASE ( 'old_dt' )
	392	READ ( 13 ) old_dt
	393	CASE ( 'omega' )
	394	READ ( 13 ) omega
	395	CASE ( 'outflow_damping_width' )
	396	READ ( 13 ) outflow_damping_width
[345]	397	CASE ( 'output_for_t0' )
	398	READ (13) output_for_t0
[1]	399	CASE ( 'overshoot_limit_e' )
	400	READ ( 13 ) overshoot_limit_e
	401	CASE ( 'overshoot_limit_pt' )
	402	READ ( 13 ) overshoot_limit_pt
	403	CASE ( 'overshoot_limit_u' )
	404	READ ( 13 ) overshoot_limit_u
	405	CASE ( 'overshoot_limit_v' )
	406	READ ( 13 ) overshoot_limit_v
	407	CASE ( 'overshoot_limit_w' )
	408	READ ( 13 ) overshoot_limit_w
	409	CASE ( 'passive_scalar' )
	410	READ ( 13 ) passive_scalar
[138]	411	CASE ( 'pch_index' )
	412	READ ( 13 ) pch_index
[1]	413	CASE ( 'phi' )
	414	READ ( 13 ) phi
[138]	415	CASE ( 'plant_canopy' )
	416	READ ( 13 ) plant_canopy
[1]	417	CASE ( 'prandtl_layer' )
	418	READ ( 13 ) prandtl_layer
	419	CASE ( 'precipitation' )
	420	READ ( 13 ) precipitation
	421	CASE ( 'pt_init' )
	422	READ ( 13 ) pt_init
[57]	423	CASE ( 'pt_reference' )
	424	READ ( 13 ) pt_reference
[1]	425	CASE ( 'pt_surface' )
	426	READ ( 13 ) pt_surface
	427	CASE ( 'pt_surface_initial_change' )
	428	READ ( 13 ) pt_surface_initial_change
	429	CASE ( 'pt_vertical_gradient' )
	430	READ ( 13 ) pt_vertical_gradient
	431	CASE ( 'pt_vertical_gradient_level' )
	432	READ ( 13 ) pt_vertical_gradient_level
	433	CASE ( 'pt_vertical_gradient_level_ind' )
	434	READ ( 13 ) pt_vertical_gradient_level_ind
	435	CASE ( 'q_init' )
	436	READ ( 13 ) q_init
	437	CASE ( 'q_surface' )
	438	READ ( 13 ) q_surface
	439	CASE ( 'q_surface_initial_change' )
	440	READ ( 13 ) q_surface_initial_change
	441	CASE ( 'q_vertical_gradient' )
	442	READ ( 13 ) q_vertical_gradient
	443	CASE ( 'q_vertical_gradient_level' )
	444	READ ( 13 ) q_vertical_gradient_level
	445	CASE ( 'q_vertical_gradient_level_ind' )
	446	READ ( 13 ) q_vertical_gradient_level_ind
	447	CASE ( 'radiation' )
	448	READ ( 13 ) radiation
	449	CASE ( 'random_generator' )
	450	READ ( 13 ) random_generator
	451	CASE ( 'random_heatflux' )
	452	READ ( 13 ) random_heatflux
[151]	453	CASE ( 'recycling_width' )
	454	READ ( 13 ) recycling_width
[1]	455	CASE ( 'rif_max' )
	456	READ ( 13 ) rif_max
	457	CASE ( 'rif_min' )
	458	READ ( 13 ) rif_min
	459	CASE ( 'roughness_length' )
	460	READ ( 13 ) roughness_length
	461	CASE ( 'runnr' )
	462	READ ( 13 ) runnr
[291]	463	CASE ( 'run_coupled' )
	464	READ ( 13 ) run_coupled
[94]	465	CASE ( 'sa_init' )
	466	READ ( 13 ) sa_init
	467	CASE ( 'sa_surface' )
	468	READ ( 13 ) sa_surface
	469	CASE ( 'sa_vertical_gradient' )
	470	READ ( 13 ) sa_vertical_gradient
	471	CASE ( 'sa_vertical_gradient_level' )
	472	READ ( 13 ) sa_vertical_gradient_level
[1]	473	CASE ( 'scalar_advec' )
	474	READ ( 13 ) scalar_advec
[153]	475	CASE ( 'scalar_exchange_coefficient' )
	476	READ ( 13 ) scalar_exchange_coefficient
[1]	477	CASE ( 'simulated_time' )
	478	READ ( 13 ) simulated_time
	479	CASE ( 'surface_heatflux' )
	480	READ ( 13 ) surface_heatflux
	481	CASE ( 'surface_pressure' )
	482	READ ( 13 ) surface_pressure
	483	CASE ( 'surface_scalarflux' )
	484	READ ( 13 ) surface_scalarflux
	485	CASE ( 'surface_waterflux' )
	486	READ ( 13 ) surface_waterflux
	487	CASE ( 's_surface' )
	488	READ ( 13 ) s_surface
	489	CASE ( 's_surface_initial_change' )
	490	READ ( 13 ) s_surface_initial_change
	491	CASE ( 's_vertical_gradient' )
	492	READ ( 13 ) s_vertical_gradient
	493	CASE ( 's_vertical_gradient_level' )
	494	READ ( 13 ) s_vertical_gradient_level
[102]	495	CASE ( 'time_coupling' )
	496	READ ( 13 ) time_coupling
[1]	497	CASE ( 'time_disturb' )
	498	READ ( 13 ) time_disturb
[587]	499	CASE ( 'time_dopr' )
[1]	500	READ ( 13 ) time_dopr
[587]	501	CASE ( 'time_domask' )
	502	READ ( 13 ) time_domask
[1]	503	CASE ( 'time_dopr_av' )
	504	READ ( 13 ) time_dopr_av
	505	CASE ( 'time_dopr_listing' )
	506	READ ( 13 ) time_dopr_listing
	507	CASE ( 'time_dopts' )
	508	READ ( 13 ) time_dopts
	509	CASE ( 'time_dosp' )
	510	READ ( 13 ) time_dosp
	511	CASE ( 'time_dots' )
	512	READ ( 13 ) time_dots
	513	CASE ( 'time_do2d_xy' )
	514	READ ( 13 ) time_do2d_xy
	515	CASE ( 'time_do2d_xz' )
	516	READ ( 13 ) time_do2d_xz
	517	CASE ( 'time_do2d_yz' )
	518	READ ( 13 ) time_do2d_yz
	519	CASE ( 'time_do3d' )
	520	READ ( 13 ) time_do3d
	521	CASE ( 'time_do_av' )
	522	READ ( 13 ) time_do_av
	523	CASE ( 'time_do_sla' )
	524	READ ( 13 ) time_do_sla
	525	CASE ( 'time_dvrp' )
	526	READ ( 13 ) time_dvrp
	527	CASE ( 'time_restart' )
	528	READ ( 13 ) time_restart
	529	CASE ( 'time_run_control' )
	530	READ ( 13 ) time_run_control
[291]	531	CASE ( 'time_since_reference_point' )
	532	READ ( 13 ) time_since_reference_point
[116]	533	CASE ( 'time_sort_particles' )
	534	READ ( 13 ) time_sort_particles
[1]	535	CASE ( 'timestep_scheme' )
	536	READ ( 13 ) timestep_scheme
	537	CASE ( 'topography' )
	538	READ ( 13 ) topography
[256]	539	CASE ( 'topography_grid_convention' )
	540	READ ( 13 ) topography_grid_convention
[19]	541	CASE ( 'top_heatflux' )
	542	READ ( 13 ) top_heatflux
[102]	543	CASE ( 'top_momentumflux_u' )
	544	READ ( 13 ) top_momentumflux_u
	545	CASE ( 'top_momentumflux_v' )
	546	READ ( 13 ) top_momentumflux_v
[94]	547	CASE ( 'top_salinityflux' )
	548	READ ( 13 ) top_salinityflux
[1]	549	CASE ( 'tsc' )
	550	READ ( 13 ) tsc
[151]	551	CASE ( 'turbulent_inflow' )
	552	READ ( 13 ) turbulent_inflow
[241]	553	CASE ( 'u_bulk' )
	554	READ ( 13 ) u_bulk
[1]	555	CASE ( 'u_init' )
	556	READ ( 13 ) u_init
	557	CASE ( 'u_max' )
	558	READ ( 13 ) u_max
	559	CASE ( 'u_max_ijk' )
	560	READ ( 13 ) u_max_ijk
	561	CASE ( 'ug' )
	562	READ ( 13 ) ug
	563	CASE ( 'ug_surface' )
	564	READ ( 13 ) ug_surface
	565	CASE ( 'ug_vertical_gradient' )
	566	READ ( 13 ) ug_vertical_gradient
	567	CASE ( 'ug_vertical_gradient_level' )
	568	READ ( 13 ) ug_vertical_gradient_level
	569	CASE ( 'ug_vertical_gradient_level_ind' )
	570	READ ( 13 ) ug_vertical_gradient_level_ind
	571	CASE ( 'ups_limit_e' )
	572	READ ( 13 ) ups_limit_e
	573	CASE ( 'ups_limit_pt' )
	574	READ ( 13 ) ups_limit_pt
	575	CASE ( 'ups_limit_u' )
	576	READ ( 13 ) ups_limit_u
	577	CASE ( 'ups_limit_v' )
	578	READ ( 13 ) ups_limit_v
	579	CASE ( 'ups_limit_w' )
	580	READ ( 13 ) ups_limit_w
	581	CASE ( 'use_surface_fluxes' )
	582	READ ( 13 ) use_surface_fluxes
[20]	583	CASE ( 'use_top_fluxes' )
	584	READ ( 13 ) use_top_fluxes
[1]	585	CASE ( 'use_ug_for_galilei_tr' )
	586	READ ( 13 ) use_ug_for_galilei_tr
	587	CASE ( 'use_upstream_for_tke' )
	588	READ ( 13 ) use_upstream_for_tke
[241]	589	CASE ( 'v_bulk' )
	590	READ ( 13 ) v_bulk
[1]	591	CASE ( 'v_init' )
	592	READ ( 13 ) v_init
	593	CASE ( 'v_max' )
	594	READ ( 13 ) v_max
	595	CASE ( 'v_max_ijk' )
	596	READ ( 13 ) v_max_ijk
	597	CASE ( 'vg' )
	598	READ ( 13 ) vg
	599	CASE ( 'vg_surface' )
	600	READ ( 13 ) vg_surface
	601	CASE ( 'vg_vertical_gradient' )
	602	READ ( 13 ) vg_vertical_gradient
	603	CASE ( 'vg_vertical_gradient_level' )
	604	READ ( 13 ) vg_vertical_gradient_level
	605	CASE ( 'vg_vertical_gradient_level_ind' )
	606	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	607	CASE ( 'volume_flow_area' )
	608	READ ( 13 ) volume_flow_area
	609	CASE ( 'volume_flow_initial' )
	610	READ ( 13 ) volume_flow_initial
[1]	611	CASE ( 'wall_adjustment' )
	612	READ ( 13 ) wall_adjustment
[580]	613	CASE ( 'subs_vertical_gradient' )
	614	READ ( 13 ) subs_vertical_gradient
	615	CASE ( 'subs_vertical_gradient_level' )
	616	READ ( 13 ) subs_vertical_gradient_level
	617	CASE ( 'subs_vertical_gradient_level_i' )
	618	READ ( 13 ) subs_vertical_gradient_level_i
[1]	619	CASE ( 'w_max' )
	620	READ ( 13 ) w_max
	621	CASE ( 'w_max_ijk' )
	622	READ ( 13 ) w_max_ijk
	623
	624	CASE DEFAULT
[257]	625	WRITE( message_string, * ) 'unknown variable named "', &
	626	TRIM( variable_chr ), '" found in', &
	627	' data from prior run on PE ', myid
	628	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	629	END SELECT
	630	!
	631	!-- Read next string
	632	READ ( 13 ) variable_chr
	633
	634	ENDDO
	635
	636
[146]	637	END SUBROUTINE read_var_list
[143]	638
[146]	639
	640
[147]	641	SUBROUTINE read_parts_of_var_list
	642
	643	!------------------------------------------------------------------------------!
	644	! Description:
	645	! ------------
	646	! Skipping the global control variables from restart-file (binary format)
	647	! except some informations needed when reading restart data from a previous
[151]	648	! run which used a smaller total domain or/and a different domain decomposition.
[147]	649	!------------------------------------------------------------------------------!
	650
[151]	651	USE arrays_3d
[147]	652	USE control_parameters
	653	USE indices
	654	USE pegrid
	655	USE statistics
	656
	657	IMPLICIT NONE
	658
	659	CHARACTER (LEN=10) :: version_on_file
	660	CHARACTER (LEN=30) :: variable_chr
	661
	662	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	663	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	664
[151]	665	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	666	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	667
	668
	669	CALL check_open( 13 )
	670
	671	WRITE (9,*) 'rpovl: after check open 13'
	672	CALL local_flush( 9 )
	673	READ ( 13 ) version_on_file
	674
	675	!
	676	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	677	!-- run
	678	READ ( 13 ) variable_chr
	679	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	680	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	681	'run on PE ', myid
[257]	682	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	683	ENDIF
	684	READ ( 13 ) numprocs_previous_run
	685
	686	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	687	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	688	ENDIF
	689
	690	READ ( 13 ) variable_chr
	691	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	692	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	693	'prior run on PE ', myid
	694	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	695	ENDIF
	696	READ ( 13 ) hor_index_bounds_previous_run
	697
	698	!
	699	!-- Read vertical number of gridpoints and number of different areas used
	700	!-- for computing statistics. Allocate arrays depending on these values,
	701	!-- which are needed for the following read instructions.
	702	READ ( 13 ) variable_chr
	703	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	704	message_string = 'nz not found in restart data file'
	705	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	706	ENDIF
	707	READ ( 13 ) nz_on_file
	708	IF ( nz_on_file /= nz ) THEN
[257]	709	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	710	'gridpoints along z', &
	711	'&nz on file = "', nz_on_file, '"', &
	712	'&nz from run = "', nz, '"'
[257]	713	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	714	ENDIF
	715
	716	READ ( 13 ) variable_chr
	717	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	718	message_string = 'max_pr_user not found in restart data file'
	719	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	720	ENDIF
	721	READ ( 13 ) max_pr_user_on_file
[170]	722	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	723	WRITE( message_string, * ) 'number of user profiles on res', &
	724	'tart data file differs from the current ', &
	725	'run&max_pr_user on file = "', &
	726	max_pr_user_on_file, '"', &
	727	'&max_pr_user from run = "', &
[257]	728	max_pr_user, '"'
	729	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	730	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	731	ELSE
	732	tmp_mpru = max_pr_user
[147]	733	ENDIF
	734
	735	READ ( 13 ) variable_chr
	736	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	737	message_string = 'statistic_regions not found in restart data file'
	738	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	739	ENDIF
	740	READ ( 13 ) statistic_regions_on_file
[173]	741	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	742	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	743	'differ from the current run', &
	744	'&statistic regions on file = "', &
	745	statistic_regions_on_file, '"', &
	746	'&statistic regions from run = "', &
	747	statistic_regions, '"', &
[257]	748	'&statistic data may be lost!'
	749	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	750	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	751	ELSE
	752	tmp_sr = statistic_regions
[147]	753	ENDIF
	754
	755
	756	!
	757	!-- Now read and check some control parameters and skip the rest
	758	WRITE (9,*) 'wpovl: begin reading variables'
	759	CALL local_flush( 9 )
	760	READ ( 13 ) variable_chr
	761
	762	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	763
	764	SELECT CASE ( TRIM( variable_chr ) )
	765
[151]	766	CASE ( 'average_count_pr' )
	767	READ ( 13 ) average_count_pr
[257]	768	IF ( average_count_pr /= 0 ) THEN
[274]	769	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	770	'averaged. &Averaging will be done now using ', &
	771	average_count_pr, ' samples.'
	772	CALL message( 'read_parts_of_var_list', 'PA0309', &
	773	0, 1, 0, 6, 0 )
[151]	774	ENDIF
	775
[147]	776	CASE ( 'hom' )
	777	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	778	0:statistic_regions_on_file) )
	779	READ ( 13 ) hom_on_file
[170]	780	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	781	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	782	DEALLOCATE( hom_on_file )
	783
[151]	784	CASE ( 'hom_sum' )
	785	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	786	0:statistic_regions_on_file) )
	787	READ ( 13 ) hom_sum_on_file
[170]	788	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	789	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	790	DEALLOCATE( hom_sum_on_file )
	791
[147]	792	CASE ( 'nx' )
	793	READ ( 13 ) nx_on_file
	794
	795	CASE ( 'ny' )
	796	READ ( 13 ) ny_on_file
	797
	798
	799	CASE DEFAULT
	800
	801	READ ( 13 ) idum
	802
	803	END SELECT
	804
	805	READ ( 13 ) variable_chr
	806
	807	ENDDO
	808
[151]	809	!
	810	!-- Calculate the temporal average of vertical profiles, if neccessary
	811	IF ( average_count_pr /= 0 ) THEN
	812	hom_sum = hom_sum / REAL( average_count_pr )
	813	ENDIF
[147]	814
[151]	815
[147]	816	END SUBROUTINE read_parts_of_var_list
	817
	818
	819
[146]	820	SUBROUTINE skip_var_list
	821
	822	!------------------------------------------------------------------------------!
	823	! Description:
	824	! ------------
	825	! Skipping the global control variables from restart-file (binary format)
	826	!------------------------------------------------------------------------------!
	827
[147]	828	IMPLICIT NONE
	829
[146]	830	CHARACTER (LEN=10) :: version_on_file
	831	CHARACTER (LEN=30) :: variable_chr
	832
	833	INTEGER :: idum
	834
	835
[147]	836	WRITE (9,*) 'skipvl #1'
	837	CALL local_flush( 9 )
[146]	838	READ ( 13 ) version_on_file
	839
[147]	840	WRITE (9,*) 'skipvl before variable_chr'
	841	CALL local_flush( 9 )
[146]	842	READ ( 13 ) variable_chr
[147]	843	WRITE (9,*) 'skipvl after variable_chr'
	844	CALL local_flush( 9 )
[146]	845
	846	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	847
[147]	848	WRITE (9,*) 'skipvl chr = ', variable_chr
	849	CALL local_flush( 9 )
[146]	850	READ ( 13 ) idum
	851	READ ( 13 ) variable_chr
	852
	853	ENDDO
[147]	854	WRITE (9,*) 'skipvl last'
	855	CALL local_flush( 9 )
[146]	856
	857
	858	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |