Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 415

Last change on this file since 415 was 411, checked in by heinze, 15 years ago
Large scale vertical motion (subsidence/ascent) can be applied to the prognostic equation for the potential temperature
Property svn:keywords set to `Id`
File size: 30.9 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[1]	5	! -----------------
[411]	6	! +large_scale_subsidence, ws_vertical_gradient, ws_vertical_gradient_level,
	7	! ws_vertical_gradient_level_ind
[392]	8	!
	9	! Former revisions:
	10	! -----------------
	11	! $Id: read_var_list.f90 411 2009-12-11 14:15:58Z raasch $
	12	!
	13	! 345 2009-07-01 14:37:56Z heinze
[345]	14	! +output_for_t0
[336]	15	! dt_fixed is read into a dummy variable.
[257]	16	! Output of messages replaced by message handling routine.
[240]	17	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	18	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	19	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	20	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	21	!
[226]	22	! 216 2008-11-25 07:12:43Z raasch
	23	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	24	!
[198]	25	! 173 2008-05-23 20:39:38Z raasch
[153]	26	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	27	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	28	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	29	! recycling_width, turbulent_inflow,
[145]	30	! -cross_ts_*, npex, npey,
	31	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	32	! read_3d_binary to here,
[147]	33	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	34	!
[139]	35	! 138 2007-11-28 10:03:58Z letzel
	36	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	37	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	38	! plant_canopy, time_sort_particles
	39	!
[110]	40	! 102 2007-07-27 09:09:17Z raasch
	41	! +time_coupling, top_momentumflux_u\|v
	42	!
[98]	43	! 95 2007-06-02 16:48:38Z raasch
	44	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	45	! sa_vertical_gradient_level, bottom/top_salinity_flux
	46	!
[90]	47	! 87 2007-05-22 15:46:47Z raasch
	48	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	49	!
[77]	50	! 75 2007-03-22 09:54:05Z raasch
	51	! +loop_optimization, pt_reference, moisture renamed humidity
	52	!
[39]	53	! 20 2007-02-26 00:12:32Z raasch
	54	! +top_heatflux, use_top_fluxes
	55	!
[3]	56	! RCS Log replace by Id keyword, revision history cleaned up
	57	!
[1]	58	! Revision 1.34 2006/08/22 14:14:27 raasch
	59	! +dz_max
	60	!
	61	! Revision 1.1 1998/03/18 20:18:48 raasch
	62	! Initial revision
	63	!
	64	!
	65	! Description:
	66	! ------------
[143]	67	! Reading values of global control variables from restart-file (binary format)
[1]	68	!------------------------------------------------------------------------------!
	69
	70	USE arrays_3d
	71	USE averaging
[87]	72	USE control_parameters
[1]	73	USE grid_variables
	74	USE indices
	75	USE model_1d
[345]	76	USE netcdf_control
[116]	77	USE particle_attributes
[1]	78	USE pegrid
	79	USE profil_parameter
	80	USE statistics
	81
	82	IMPLICIT NONE
	83
	84	CHARACTER (LEN=10) :: binary_version, version_on_file
	85	CHARACTER (LEN=30) :: variable_chr
[87]	86
[336]	87	LOGICAL :: ldum
[143]	88
[336]	89
[1]	90	CALL check_open( 13 )
	91
	92	!
	93	!-- Make version number check first
	94	READ ( 13 ) version_on_file
[241]	95	binary_version = '3.4'
[1]	96	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	97	WRITE( message_string, * ) 'version mismatch concerning control ', &
	98	'variables', &
	99	'&version on file = "', &
	100	TRIM( version_on_file ), '"', &
	101	'&version on program = "', &
	102	TRIM( binary_version ), '"'
	103	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	104	ENDIF
	105
	106	!
[145]	107	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	108	!-- run
	109	READ ( 13 ) variable_chr
	110	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	111	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	112	'run on PE ', myid
[257]	113	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	114	ENDIF
	115	READ ( 13 ) numprocs_previous_run
	116
[146]	117	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	118	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	119	ENDIF
[145]	120
	121	READ ( 13 ) variable_chr
	122	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	123	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	124	'prior run on PE ', myid
	125	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	126	ENDIF
	127	READ ( 13 ) hor_index_bounds_previous_run
	128
	129	!
[1]	130	!-- Read vertical number of gridpoints and number of different areas used
	131	!-- for computing statistics. Allocate arrays depending on these values,
	132	!-- which are needed for the following read instructions.
	133	READ ( 13 ) variable_chr
	134	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	135	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	136	myid
	137	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	138	ENDIF
	139	READ ( 13 ) nz
[87]	140
[1]	141	READ ( 13 ) variable_chr
[87]	142	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	143	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	144	'prior run on PE ', myid
[257]	145	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	146	ENDIF
[159]	147	READ ( 13 ) max_pr_user ! This value is checked against the number of
	148	! user profiles given for the current run
	149	! in routine user_parin (it has to match)
[87]	150
	151	READ ( 13 ) variable_chr
[1]	152	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	153	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	154	'prior run on PE ', myid
[257]	155	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	156	ENDIF
	157	READ ( 13 ) statistic_regions
[146]	158	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	159	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	160	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	161	sa_init(0:nz+1), &
[146]	162	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	163	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	164	ENDIF
[1]	165
	166	!
	167	!-- Now read all control parameters:
	168	!-- Caution: When the following read instructions have been changed, the
	169	!-- ------- version number stored in the variable binary_version has to be
	170	!-- increased. The same changes must also be done in write_var_list.
	171	READ ( 13 ) variable_chr
	172	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	173
	174	SELECT CASE ( TRIM( variable_chr ) )
	175
	176	CASE ( 'adjust_mixing_length' )
	177	READ ( 13 ) adjust_mixing_length
	178	CASE ( 'advected_distance_x' )
	179	READ ( 13 ) advected_distance_x
	180	CASE ( 'advected_distance_y' )
	181	READ ( 13 ) advected_distance_y
	182	CASE ( 'alpha_surface' )
	183	READ ( 13 ) alpha_surface
	184	CASE ( 'average_count_pr' )
	185	READ ( 13 ) average_count_pr
	186	CASE ( 'average_count_sp' )
	187	READ ( 13 ) average_count_sp
	188	CASE ( 'average_count_3d' )
	189	READ ( 13 ) average_count_3d
	190	CASE ( 'bc_e_b' )
	191	READ ( 13 ) bc_e_b
	192	CASE ( 'bc_lr' )
	193	READ ( 13 ) bc_lr
	194	CASE ( 'bc_ns' )
	195	READ ( 13 ) bc_ns
	196	CASE ( 'bc_p_b' )
	197	READ ( 13 ) bc_p_b
	198	CASE ( 'bc_p_t' )
	199	READ ( 13 ) bc_p_t
	200	CASE ( 'bc_pt_b' )
	201	READ ( 13 ) bc_pt_b
	202	CASE ( 'bc_pt_t' )
	203	READ ( 13 ) bc_pt_t
	204	CASE ( 'bc_pt_t_val' )
	205	READ ( 13 ) bc_pt_t_val
	206	CASE ( 'bc_q_b' )
	207	READ ( 13 ) bc_q_b
	208	CASE ( 'bc_q_t' )
	209	READ ( 13 ) bc_q_t
	210	CASE ( 'bc_q_t_val' )
	211	READ ( 13 ) bc_q_t_val
	212	CASE ( 'bc_s_b' )
	213	READ ( 13 ) bc_s_b
	214	CASE ( 'bc_s_t' )
	215	READ ( 13 ) bc_s_t
[95]	216	CASE ( 'bc_sa_t' )
	217	READ ( 13 ) bc_sa_t
[1]	218	CASE ( 'bc_uv_b' )
	219	READ ( 13 ) bc_uv_b
	220	CASE ( 'bc_uv_t' )
	221	READ ( 13 ) bc_uv_t
[95]	222	CASE ( 'bottom_salinityflux' )
	223	READ ( 13 ) bottom_salinityflux
[1]	224	CASE ( 'building_height' )
	225	READ ( 13 ) building_height
	226	CASE ( 'building_length_x' )
	227	READ ( 13 ) building_length_x
	228	CASE ( 'building_length_y' )
	229	READ ( 13 ) building_length_y
	230	CASE ( 'building_wall_left' )
	231	READ ( 13 ) building_wall_left
	232	CASE ( 'building_wall_south' )
	233	READ ( 13 ) building_wall_south
[138]	234	CASE ( 'canopy_mode' )
	235	READ ( 13 ) canopy_mode
[240]	236	CASE ( 'canyon_height' )
	237	READ ( 13 ) canyon_height
	238	CASE ( 'canyon_width_x' )
	239	READ ( 13 ) canyon_width_x
	240	CASE ( 'canyon_width_y' )
	241	READ ( 13 ) canyon_width_y
	242	CASE ( 'canyon_wall_left' )
	243	READ ( 13 ) canyon_wall_left
	244	CASE ( 'canyon_wall_south' )
	245	READ ( 13 ) canyon_wall_south
[1]	246	CASE ( 'cloud_droplets' )
	247	READ ( 13 ) cloud_droplets
	248	CASE ( 'cloud_physics' )
	249	READ ( 13 ) cloud_physics
	250	CASE ( 'conserve_volume_flow' )
	251	READ ( 13 ) conserve_volume_flow
[241]	252	CASE ( 'conserve_volume_flow_mode' )
	253	READ ( 13 ) conserve_volume_flow_mode
[291]	254	CASE ( 'coupling_start_time' )
	255	READ ( 13 ) coupling_start_time
[153]	256	CASE ( 'cthf' )
	257	READ ( 13 ) cthf
[1]	258	CASE ( 'current_timestep_number' )
	259	READ ( 13 ) current_timestep_number
	260	CASE ( 'cut_spline_overshoot' )
	261	READ ( 13 ) cut_spline_overshoot
	262	CASE ( 'damp_level_1d' )
	263	READ ( 13 ) damp_level_1d
	264	CASE ( 'dissipation_1d' )
	265	READ ( 13 ) dissipation_1d
[240]	266	CASE ( 'dp_external' )
	267	READ ( 13 ) dp_external
	268	CASE ( 'dp_level_b' )
	269	READ ( 13 ) dp_level_b
	270	CASE ( 'dp_smooth' )
	271	READ ( 13 ) dp_smooth
	272	CASE ( 'dpdxy' )
	273	READ ( 13 ) dpdxy
[138]	274	CASE ( 'drag_coefficient' )
	275	READ ( 13 ) drag_coefficient
[1]	276	CASE ( 'dt_fixed' )
[336]	277	READ ( 13 ) ldum ! restart files created before rev 333
	278	! contained dt_fixed by mistake; it is still
	279	! read here in order to allow usage of these
	280	! older restart files; can be removed in a
	281	! later version
[1]	282	CASE ( 'dt_pr_1d' )
	283	READ ( 13 ) dt_pr_1d
	284	CASE ( 'dt_run_control_1d' )
	285	READ ( 13 ) dt_run_control_1d
	286	CASE ( 'dt_3d' )
	287	READ ( 13 ) dt_3d
	288	CASE ( 'dvrp_filecount' )
	289	READ ( 13 ) dvrp_filecount
	290	CASE ( 'dx' )
	291	READ ( 13 ) dx
	292	CASE ( 'dy' )
	293	READ ( 13 ) dy
	294	CASE ( 'dz' )
	295	READ ( 13 ) dz
	296	CASE ( 'dz_max' )
	297	READ ( 13 ) dz_max
	298	CASE ( 'dz_stretch_factor' )
	299	READ ( 13 ) dz_stretch_factor
	300	CASE ( 'dz_stretch_level' )
	301	READ ( 13 ) dz_stretch_level
	302	CASE ( 'e_min' )
	303	READ ( 13 ) e_min
	304	CASE ( 'end_time_1d' )
	305	READ ( 13 ) end_time_1d
	306	CASE ( 'fft_method' )
	307	READ ( 13 ) fft_method
	308	CASE ( 'first_call_advec_particles' )
	309	READ ( 13 ) first_call_advec_particles
	310	CASE ( 'galilei_transformation' )
	311	READ ( 13 ) galilei_transformation
	312	CASE ( 'grid_matching' )
	313	READ ( 13 ) grid_matching
	314	CASE ( 'hom' )
	315	READ ( 13 ) hom
[143]	316	CASE ( 'hom_sum' )
	317	READ ( 13 ) hom_sum
[151]	318	CASE ( 'humidity' )
	319	READ ( 13 ) humidity
	320	CASE ( 'inflow_damping_factor' )
	321	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	322	ALLOCATE( inflow_damping_factor(0:nz+1) )
	323	ENDIF
	324	READ ( 13 ) inflow_damping_factor
	325	CASE ( 'inflow_damping_height' )
	326	READ ( 13 ) inflow_damping_height
	327	CASE ( 'inflow_damping_width' )
	328	READ ( 13 ) inflow_damping_width
[1]	329	CASE ( 'inflow_disturbance_begin' )
	330	READ ( 13 ) inflow_disturbance_begin
	331	CASE ( 'inflow_disturbance_end' )
	332	READ ( 13 ) inflow_disturbance_end
	333	CASE ( 'km_constant' )
	334	READ ( 13 ) km_constant
	335	CASE ( 'km_damp_max' )
	336	READ ( 13 ) km_damp_max
[138]	337	CASE ( 'lad' )
	338	READ ( 13 ) lad
	339	CASE ( 'lad_surface' )
	340	READ ( 13 ) lad_surface
	341	CASE ( 'lad_vertical_gradient' )
	342	READ ( 13 ) lad_vertical_gradient
	343	CASE ( 'lad_vertical_gradient_level' )
	344	READ ( 13 ) lad_vertical_gradient_level
	345	CASE ( 'lad_vertical_gradient_level_in' )
	346	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	347	CASE ( 'last_dt_change' )
	348	READ ( 13 ) last_dt_change
[411]	349	CASE ( 'large_scale_subsidence' )
	350	READ ( 13 ) large_scale_subsidence
[153]	351	CASE ( 'leaf_surface_concentration' )
	352	READ ( 13 ) leaf_surface_concentration
[1]	353	CASE ( 'long_filter_factor' )
	354	READ ( 13 ) long_filter_factor
[63]	355	CASE ( 'loop_optimization' )
	356	READ ( 13 ) loop_optimization
[151]	357	CASE ( 'mean_inflow_profiles' )
	358	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	359	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	360	ENDIF
	361	READ ( 13 ) mean_inflow_profiles
[1]	362	CASE ( 'mixing_length_1d' )
	363	READ ( 13 ) mixing_length_1d
	364	CASE ( 'momentum_advec' )
	365	READ ( 13 ) momentum_advec
	366	CASE ( 'netcdf_precision' )
	367	READ ( 13 ) netcdf_precision
	368	CASE ( 'nsor_ini' )
	369	READ ( 13 ) nsor_ini
	370	CASE ( 'nx' )
	371	READ ( 13 ) nx
[147]	372	nx_on_file = nx
[1]	373	CASE ( 'ny' )
	374	READ ( 13 ) ny
[147]	375	ny_on_file = ny
[94]	376	CASE ( 'ocean' )
	377	READ ( 13 ) ocean
[1]	378	CASE ( 'old_dt' )
	379	READ ( 13 ) old_dt
	380	CASE ( 'omega' )
	381	READ ( 13 ) omega
	382	CASE ( 'outflow_damping_width' )
	383	READ ( 13 ) outflow_damping_width
[345]	384	CASE ( 'output_for_t0' )
	385	READ (13) output_for_t0
[1]	386	CASE ( 'overshoot_limit_e' )
	387	READ ( 13 ) overshoot_limit_e
	388	CASE ( 'overshoot_limit_pt' )
	389	READ ( 13 ) overshoot_limit_pt
	390	CASE ( 'overshoot_limit_u' )
	391	READ ( 13 ) overshoot_limit_u
	392	CASE ( 'overshoot_limit_v' )
	393	READ ( 13 ) overshoot_limit_v
	394	CASE ( 'overshoot_limit_w' )
	395	READ ( 13 ) overshoot_limit_w
	396	CASE ( 'passive_scalar' )
	397	READ ( 13 ) passive_scalar
[138]	398	CASE ( 'pch_index' )
	399	READ ( 13 ) pch_index
[1]	400	CASE ( 'phi' )
	401	READ ( 13 ) phi
[138]	402	CASE ( 'plant_canopy' )
	403	READ ( 13 ) plant_canopy
[1]	404	CASE ( 'prandtl_layer' )
	405	READ ( 13 ) prandtl_layer
	406	CASE ( 'precipitation' )
	407	READ ( 13 ) precipitation
	408	CASE ( 'pt_init' )
	409	READ ( 13 ) pt_init
[57]	410	CASE ( 'pt_reference' )
	411	READ ( 13 ) pt_reference
[1]	412	CASE ( 'pt_surface' )
	413	READ ( 13 ) pt_surface
	414	CASE ( 'pt_surface_initial_change' )
	415	READ ( 13 ) pt_surface_initial_change
	416	CASE ( 'pt_vertical_gradient' )
	417	READ ( 13 ) pt_vertical_gradient
	418	CASE ( 'pt_vertical_gradient_level' )
	419	READ ( 13 ) pt_vertical_gradient_level
	420	CASE ( 'pt_vertical_gradient_level_ind' )
	421	READ ( 13 ) pt_vertical_gradient_level_ind
	422	CASE ( 'q_init' )
	423	READ ( 13 ) q_init
	424	CASE ( 'q_surface' )
	425	READ ( 13 ) q_surface
	426	CASE ( 'q_surface_initial_change' )
	427	READ ( 13 ) q_surface_initial_change
	428	CASE ( 'q_vertical_gradient' )
	429	READ ( 13 ) q_vertical_gradient
	430	CASE ( 'q_vertical_gradient_level' )
	431	READ ( 13 ) q_vertical_gradient_level
	432	CASE ( 'q_vertical_gradient_level_ind' )
	433	READ ( 13 ) q_vertical_gradient_level_ind
	434	CASE ( 'radiation' )
	435	READ ( 13 ) radiation
	436	CASE ( 'random_generator' )
	437	READ ( 13 ) random_generator
	438	CASE ( 'random_heatflux' )
	439	READ ( 13 ) random_heatflux
[151]	440	CASE ( 'recycling_width' )
	441	READ ( 13 ) recycling_width
[1]	442	CASE ( 'rif_max' )
	443	READ ( 13 ) rif_max
	444	CASE ( 'rif_min' )
	445	READ ( 13 ) rif_min
	446	CASE ( 'roughness_length' )
	447	READ ( 13 ) roughness_length
	448	CASE ( 'runnr' )
	449	READ ( 13 ) runnr
[291]	450	CASE ( 'run_coupled' )
	451	READ ( 13 ) run_coupled
[94]	452	CASE ( 'sa_init' )
	453	READ ( 13 ) sa_init
	454	CASE ( 'sa_surface' )
	455	READ ( 13 ) sa_surface
	456	CASE ( 'sa_vertical_gradient' )
	457	READ ( 13 ) sa_vertical_gradient
	458	CASE ( 'sa_vertical_gradient_level' )
	459	READ ( 13 ) sa_vertical_gradient_level
[1]	460	CASE ( 'scalar_advec' )
	461	READ ( 13 ) scalar_advec
[153]	462	CASE ( 'scalar_exchange_coefficient' )
	463	READ ( 13 ) scalar_exchange_coefficient
[1]	464	CASE ( 'simulated_time' )
	465	READ ( 13 ) simulated_time
	466	CASE ( 'surface_heatflux' )
	467	READ ( 13 ) surface_heatflux
	468	CASE ( 'surface_pressure' )
	469	READ ( 13 ) surface_pressure
	470	CASE ( 'surface_scalarflux' )
	471	READ ( 13 ) surface_scalarflux
	472	CASE ( 'surface_waterflux' )
	473	READ ( 13 ) surface_waterflux
	474	CASE ( 's_surface' )
	475	READ ( 13 ) s_surface
	476	CASE ( 's_surface_initial_change' )
	477	READ ( 13 ) s_surface_initial_change
	478	CASE ( 's_vertical_gradient' )
	479	READ ( 13 ) s_vertical_gradient
	480	CASE ( 's_vertical_gradient_level' )
	481	READ ( 13 ) s_vertical_gradient_level
[102]	482	CASE ( 'time_coupling' )
	483	READ ( 13 ) time_coupling
[1]	484	CASE ( 'time_disturb' )
	485	READ ( 13 ) time_disturb
	486	CASE ( 'time_dopr' )
	487	READ ( 13 ) time_dopr
	488	CASE ( 'time_dopr_av' )
	489	READ ( 13 ) time_dopr_av
	490	CASE ( 'time_dopr_listing' )
	491	READ ( 13 ) time_dopr_listing
	492	CASE ( 'time_dopts' )
	493	READ ( 13 ) time_dopts
	494	CASE ( 'time_dosp' )
	495	READ ( 13 ) time_dosp
	496	CASE ( 'time_dots' )
	497	READ ( 13 ) time_dots
	498	CASE ( 'time_do2d_xy' )
	499	READ ( 13 ) time_do2d_xy
	500	CASE ( 'time_do2d_xz' )
	501	READ ( 13 ) time_do2d_xz
	502	CASE ( 'time_do2d_yz' )
	503	READ ( 13 ) time_do2d_yz
	504	CASE ( 'time_do3d' )
	505	READ ( 13 ) time_do3d
	506	CASE ( 'time_do_av' )
	507	READ ( 13 ) time_do_av
	508	CASE ( 'time_do_sla' )
	509	READ ( 13 ) time_do_sla
	510	CASE ( 'time_dvrp' )
	511	READ ( 13 ) time_dvrp
	512	CASE ( 'time_restart' )
	513	READ ( 13 ) time_restart
	514	CASE ( 'time_run_control' )
	515	READ ( 13 ) time_run_control
[291]	516	CASE ( 'time_since_reference_point' )
	517	READ ( 13 ) time_since_reference_point
[116]	518	CASE ( 'time_sort_particles' )
	519	READ ( 13 ) time_sort_particles
[1]	520	CASE ( 'timestep_scheme' )
	521	READ ( 13 ) timestep_scheme
	522	CASE ( 'topography' )
	523	READ ( 13 ) topography
[256]	524	CASE ( 'topography_grid_convention' )
	525	READ ( 13 ) topography_grid_convention
[19]	526	CASE ( 'top_heatflux' )
	527	READ ( 13 ) top_heatflux
[102]	528	CASE ( 'top_momentumflux_u' )
	529	READ ( 13 ) top_momentumflux_u
	530	CASE ( 'top_momentumflux_v' )
	531	READ ( 13 ) top_momentumflux_v
[94]	532	CASE ( 'top_salinityflux' )
	533	READ ( 13 ) top_salinityflux
[1]	534	CASE ( 'tsc' )
	535	READ ( 13 ) tsc
[151]	536	CASE ( 'turbulent_inflow' )
	537	READ ( 13 ) turbulent_inflow
[241]	538	CASE ( 'u_bulk' )
	539	READ ( 13 ) u_bulk
[1]	540	CASE ( 'u_init' )
	541	READ ( 13 ) u_init
	542	CASE ( 'u_max' )
	543	READ ( 13 ) u_max
	544	CASE ( 'u_max_ijk' )
	545	READ ( 13 ) u_max_ijk
	546	CASE ( 'ug' )
	547	READ ( 13 ) ug
	548	CASE ( 'ug_surface' )
	549	READ ( 13 ) ug_surface
	550	CASE ( 'ug_vertical_gradient' )
	551	READ ( 13 ) ug_vertical_gradient
	552	CASE ( 'ug_vertical_gradient_level' )
	553	READ ( 13 ) ug_vertical_gradient_level
	554	CASE ( 'ug_vertical_gradient_level_ind' )
	555	READ ( 13 ) ug_vertical_gradient_level_ind
	556	CASE ( 'ups_limit_e' )
	557	READ ( 13 ) ups_limit_e
	558	CASE ( 'ups_limit_pt' )
	559	READ ( 13 ) ups_limit_pt
	560	CASE ( 'ups_limit_u' )
	561	READ ( 13 ) ups_limit_u
	562	CASE ( 'ups_limit_v' )
	563	READ ( 13 ) ups_limit_v
	564	CASE ( 'ups_limit_w' )
	565	READ ( 13 ) ups_limit_w
	566	CASE ( 'use_surface_fluxes' )
	567	READ ( 13 ) use_surface_fluxes
[20]	568	CASE ( 'use_top_fluxes' )
	569	READ ( 13 ) use_top_fluxes
[1]	570	CASE ( 'use_ug_for_galilei_tr' )
	571	READ ( 13 ) use_ug_for_galilei_tr
	572	CASE ( 'use_upstream_for_tke' )
	573	READ ( 13 ) use_upstream_for_tke
[241]	574	CASE ( 'v_bulk' )
	575	READ ( 13 ) v_bulk
[1]	576	CASE ( 'v_init' )
	577	READ ( 13 ) v_init
	578	CASE ( 'v_max' )
	579	READ ( 13 ) v_max
	580	CASE ( 'v_max_ijk' )
	581	READ ( 13 ) v_max_ijk
	582	CASE ( 'vg' )
	583	READ ( 13 ) vg
	584	CASE ( 'vg_surface' )
	585	READ ( 13 ) vg_surface
	586	CASE ( 'vg_vertical_gradient' )
	587	READ ( 13 ) vg_vertical_gradient
	588	CASE ( 'vg_vertical_gradient_level' )
	589	READ ( 13 ) vg_vertical_gradient_level
	590	CASE ( 'vg_vertical_gradient_level_ind' )
	591	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	592	CASE ( 'volume_flow_area' )
	593	READ ( 13 ) volume_flow_area
	594	CASE ( 'volume_flow_initial' )
	595	READ ( 13 ) volume_flow_initial
[1]	596	CASE ( 'wall_adjustment' )
	597	READ ( 13 ) wall_adjustment
[411]	598	CASE ( 'ws_vertical_gradient' )
	599	READ ( 13 ) ws_vertical_gradient
	600	CASE ( 'ws_vertical_gradient_level' )
	601	READ ( 13 ) ws_vertical_gradient_level
	602	CASE ( 'ws_vertical_gradient_level_ind' )
	603	READ ( 13 ) ws_vertical_gradient_level_ind
[1]	604	CASE ( 'w_max' )
	605	READ ( 13 ) w_max
	606	CASE ( 'w_max_ijk' )
	607	READ ( 13 ) w_max_ijk
	608
	609	CASE DEFAULT
[257]	610	WRITE( message_string, * ) 'unknown variable named "', &
	611	TRIM( variable_chr ), '" found in', &
	612	' data from prior run on PE ', myid
	613	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	614	END SELECT
	615	!
	616	!-- Read next string
	617	READ ( 13 ) variable_chr
	618
	619	ENDDO
	620
	621
[146]	622	END SUBROUTINE read_var_list
[143]	623
[146]	624
	625
[147]	626	SUBROUTINE read_parts_of_var_list
	627
	628	!------------------------------------------------------------------------------!
	629	! Description:
	630	! ------------
	631	! Skipping the global control variables from restart-file (binary format)
	632	! except some informations needed when reading restart data from a previous
[151]	633	! run which used a smaller total domain or/and a different domain decomposition.
[147]	634	!------------------------------------------------------------------------------!
	635
[151]	636	USE arrays_3d
[147]	637	USE control_parameters
	638	USE indices
	639	USE pegrid
	640	USE statistics
	641
	642	IMPLICIT NONE
	643
	644	CHARACTER (LEN=10) :: version_on_file
	645	CHARACTER (LEN=30) :: variable_chr
	646
	647	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	648	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	649
[151]	650	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	651	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	652
	653
	654	CALL check_open( 13 )
	655
	656	WRITE (9,*) 'rpovl: after check open 13'
	657	CALL local_flush( 9 )
	658	READ ( 13 ) version_on_file
	659
	660	!
	661	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	662	!-- run
	663	READ ( 13 ) variable_chr
	664	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	665	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	666	'run on PE ', myid
[257]	667	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	668	ENDIF
	669	READ ( 13 ) numprocs_previous_run
	670
	671	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	672	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	673	ENDIF
	674
	675	READ ( 13 ) variable_chr
	676	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	677	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	678	'prior run on PE ', myid
	679	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	680	ENDIF
	681	READ ( 13 ) hor_index_bounds_previous_run
	682
	683	!
	684	!-- Read vertical number of gridpoints and number of different areas used
	685	!-- for computing statistics. Allocate arrays depending on these values,
	686	!-- which are needed for the following read instructions.
	687	READ ( 13 ) variable_chr
	688	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	689	message_string = 'nz not found in restart data file'
	690	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	691	ENDIF
	692	READ ( 13 ) nz_on_file
	693	IF ( nz_on_file /= nz ) THEN
[257]	694	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	695	'gridpoints along z', &
	696	'&nz on file = "', nz_on_file, '"', &
	697	'&nz from run = "', nz, '"'
[257]	698	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	699	ENDIF
	700
	701	READ ( 13 ) variable_chr
	702	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	703	message_string = 'max_pr_user not found in restart data file'
	704	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	705	ENDIF
	706	READ ( 13 ) max_pr_user_on_file
[170]	707	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	708	WRITE( message_string, * ) 'number of user profiles on res', &
	709	'tart data file differs from the current ', &
	710	'run&max_pr_user on file = "', &
	711	max_pr_user_on_file, '"', &
	712	'&max_pr_user from run = "', &
[257]	713	max_pr_user, '"'
	714	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	715	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	716	ELSE
	717	tmp_mpru = max_pr_user
[147]	718	ENDIF
	719
	720	READ ( 13 ) variable_chr
	721	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	722	message_string = 'statistic_regions not found in restart data file'
	723	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	724	ENDIF
	725	READ ( 13 ) statistic_regions_on_file
[173]	726	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	727	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	728	'differ from the current run', &
	729	'&statistic regions on file = "', &
	730	statistic_regions_on_file, '"', &
	731	'&statistic regions from run = "', &
	732	statistic_regions, '"', &
[257]	733	'&statistic data may be lost!'
	734	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	735	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	736	ELSE
	737	tmp_sr = statistic_regions
[147]	738	ENDIF
	739
	740
	741	!
	742	!-- Now read and check some control parameters and skip the rest
	743	WRITE (9,*) 'wpovl: begin reading variables'
	744	CALL local_flush( 9 )
	745	READ ( 13 ) variable_chr
	746
	747	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	748
	749	SELECT CASE ( TRIM( variable_chr ) )
	750
[151]	751	CASE ( 'average_count_pr' )
	752	READ ( 13 ) average_count_pr
[257]	753	IF ( average_count_pr /= 0 ) THEN
[274]	754	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	755	'averaged. &Averaging will be done now using ', &
	756	average_count_pr, ' samples.'
	757	CALL message( 'read_parts_of_var_list', 'PA0309', &
	758	0, 1, 0, 6, 0 )
[151]	759	ENDIF
	760
[147]	761	CASE ( 'hom' )
	762	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	763	0:statistic_regions_on_file) )
	764	READ ( 13 ) hom_on_file
[170]	765	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	766	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	767	DEALLOCATE( hom_on_file )
	768
[151]	769	CASE ( 'hom_sum' )
	770	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	771	0:statistic_regions_on_file) )
	772	READ ( 13 ) hom_sum_on_file
[170]	773	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	774	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	775	DEALLOCATE( hom_sum_on_file )
	776
[147]	777	CASE ( 'nx' )
	778	READ ( 13 ) nx_on_file
	779
	780	CASE ( 'ny' )
	781	READ ( 13 ) ny_on_file
	782
	783
	784	CASE DEFAULT
	785
	786	READ ( 13 ) idum
	787
	788	END SELECT
	789
	790	READ ( 13 ) variable_chr
	791
	792	ENDDO
	793
[151]	794	!
	795	!-- Calculate the temporal average of vertical profiles, if neccessary
	796	IF ( average_count_pr /= 0 ) THEN
	797	hom_sum = hom_sum / REAL( average_count_pr )
	798	ENDIF
[147]	799
[151]	800
[147]	801	END SUBROUTINE read_parts_of_var_list
	802
	803
	804
[146]	805	SUBROUTINE skip_var_list
	806
	807	!------------------------------------------------------------------------------!
	808	! Description:
	809	! ------------
	810	! Skipping the global control variables from restart-file (binary format)
	811	!------------------------------------------------------------------------------!
	812
[147]	813	IMPLICIT NONE
	814
[146]	815	CHARACTER (LEN=10) :: version_on_file
	816	CHARACTER (LEN=30) :: variable_chr
	817
	818	INTEGER :: idum
	819
	820
[147]	821	WRITE (9,*) 'skipvl #1'
	822	CALL local_flush( 9 )
[146]	823	READ ( 13 ) version_on_file
	824
[147]	825	WRITE (9,*) 'skipvl before variable_chr'
	826	CALL local_flush( 9 )
[146]	827	READ ( 13 ) variable_chr
[147]	828	WRITE (9,*) 'skipvl after variable_chr'
	829	CALL local_flush( 9 )
[146]	830
	831	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	832
[147]	833	WRITE (9,*) 'skipvl chr = ', variable_chr
	834	CALL local_flush( 9 )
[146]	835	READ ( 13 ) idum
	836	READ ( 13 ) variable_chr
	837
	838	ENDDO
[147]	839	WRITE (9,*) 'skipvl last'
	840	CALL local_flush( 9 )
[146]	841
	842
	843	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |