Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 347

Last change on this file since 347 was 345, checked in by heinze, 15 years ago
In case of restart runs without extension, initial profiles are not written to NetCDF-file anymore.
Property svn:keywords set to `Id`
File size: 30.4 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[1]	5	! -----------------
[345]	6	! +output_for_t0
[336]	7	! dt_fixed is read into a dummy variable.
[257]	8	! Output of messages replaced by message handling routine.
[240]	9	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	10	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	11	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	12	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	13	!
	14	! Former revisions:
	15	! -----------------
	16	! $Id: read_var_list.f90 345 2009-07-01 14:37:56Z heinze $
	17	!
[226]	18	! 216 2008-11-25 07:12:43Z raasch
	19	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	20	!
[198]	21	! 173 2008-05-23 20:39:38Z raasch
[153]	22	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	23	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	24	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	25	! recycling_width, turbulent_inflow,
[145]	26	! -cross_ts_*, npex, npey,
	27	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	28	! read_3d_binary to here,
[147]	29	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	30	!
[139]	31	! 138 2007-11-28 10:03:58Z letzel
	32	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	33	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	34	! plant_canopy, time_sort_particles
	35	!
[110]	36	! 102 2007-07-27 09:09:17Z raasch
	37	! +time_coupling, top_momentumflux_u\|v
	38	!
[98]	39	! 95 2007-06-02 16:48:38Z raasch
	40	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	41	! sa_vertical_gradient_level, bottom/top_salinity_flux
	42	!
[90]	43	! 87 2007-05-22 15:46:47Z raasch
	44	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	45	!
[77]	46	! 75 2007-03-22 09:54:05Z raasch
	47	! +loop_optimization, pt_reference, moisture renamed humidity
	48	!
[39]	49	! 20 2007-02-26 00:12:32Z raasch
	50	! +top_heatflux, use_top_fluxes
	51	!
[3]	52	! RCS Log replace by Id keyword, revision history cleaned up
	53	!
[1]	54	! Revision 1.34 2006/08/22 14:14:27 raasch
	55	! +dz_max
	56	!
	57	! Revision 1.1 1998/03/18 20:18:48 raasch
	58	! Initial revision
	59	!
	60	!
	61	! Description:
	62	! ------------
[143]	63	! Reading values of global control variables from restart-file (binary format)
[1]	64	!------------------------------------------------------------------------------!
	65
	66	USE arrays_3d
	67	USE averaging
[87]	68	USE control_parameters
[1]	69	USE grid_variables
	70	USE indices
	71	USE model_1d
[345]	72	USE netcdf_control
[116]	73	USE particle_attributes
[1]	74	USE pegrid
	75	USE profil_parameter
	76	USE statistics
	77
	78	IMPLICIT NONE
	79
	80	CHARACTER (LEN=10) :: binary_version, version_on_file
	81	CHARACTER (LEN=30) :: variable_chr
[87]	82
[336]	83	LOGICAL :: ldum
[143]	84
[336]	85
[1]	86	CALL check_open( 13 )
	87
	88	!
	89	!-- Make version number check first
	90	READ ( 13 ) version_on_file
[241]	91	binary_version = '3.4'
[1]	92	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	93	WRITE( message_string, * ) 'version mismatch concerning control ', &
	94	'variables', &
	95	'&version on file = "', &
	96	TRIM( version_on_file ), '"', &
	97	'&version on program = "', &
	98	TRIM( binary_version ), '"'
	99	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	100	ENDIF
	101
	102	!
[145]	103	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	104	!-- run
	105	READ ( 13 ) variable_chr
	106	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	107	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	108	'run on PE ', myid
[257]	109	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	110	ENDIF
	111	READ ( 13 ) numprocs_previous_run
	112
[146]	113	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	114	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	115	ENDIF
[145]	116
	117	READ ( 13 ) variable_chr
	118	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	119	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	120	'prior run on PE ', myid
	121	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	122	ENDIF
	123	READ ( 13 ) hor_index_bounds_previous_run
	124
	125	!
[1]	126	!-- Read vertical number of gridpoints and number of different areas used
	127	!-- for computing statistics. Allocate arrays depending on these values,
	128	!-- which are needed for the following read instructions.
	129	READ ( 13 ) variable_chr
	130	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	131	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	132	myid
	133	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	134	ENDIF
	135	READ ( 13 ) nz
[87]	136
[1]	137	READ ( 13 ) variable_chr
[87]	138	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	139	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	140	'prior run on PE ', myid
[257]	141	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	142	ENDIF
[159]	143	READ ( 13 ) max_pr_user ! This value is checked against the number of
	144	! user profiles given for the current run
	145	! in routine user_parin (it has to match)
[87]	146
	147	READ ( 13 ) variable_chr
[1]	148	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	149	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	150	'prior run on PE ', myid
[257]	151	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	152	ENDIF
	153	READ ( 13 ) statistic_regions
[146]	154	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	155	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	156	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	157	sa_init(0:nz+1), &
[146]	158	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	159	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	160	ENDIF
[1]	161
	162	!
	163	!-- Now read all control parameters:
	164	!-- Caution: When the following read instructions have been changed, the
	165	!-- ------- version number stored in the variable binary_version has to be
	166	!-- increased. The same changes must also be done in write_var_list.
	167	READ ( 13 ) variable_chr
	168	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	169
	170	SELECT CASE ( TRIM( variable_chr ) )
	171
	172	CASE ( 'adjust_mixing_length' )
	173	READ ( 13 ) adjust_mixing_length
	174	CASE ( 'advected_distance_x' )
	175	READ ( 13 ) advected_distance_x
	176	CASE ( 'advected_distance_y' )
	177	READ ( 13 ) advected_distance_y
	178	CASE ( 'alpha_surface' )
	179	READ ( 13 ) alpha_surface
	180	CASE ( 'average_count_pr' )
	181	READ ( 13 ) average_count_pr
	182	CASE ( 'average_count_sp' )
	183	READ ( 13 ) average_count_sp
	184	CASE ( 'average_count_3d' )
	185	READ ( 13 ) average_count_3d
	186	CASE ( 'bc_e_b' )
	187	READ ( 13 ) bc_e_b
	188	CASE ( 'bc_lr' )
	189	READ ( 13 ) bc_lr
	190	CASE ( 'bc_ns' )
	191	READ ( 13 ) bc_ns
	192	CASE ( 'bc_p_b' )
	193	READ ( 13 ) bc_p_b
	194	CASE ( 'bc_p_t' )
	195	READ ( 13 ) bc_p_t
	196	CASE ( 'bc_pt_b' )
	197	READ ( 13 ) bc_pt_b
	198	CASE ( 'bc_pt_t' )
	199	READ ( 13 ) bc_pt_t
	200	CASE ( 'bc_pt_t_val' )
	201	READ ( 13 ) bc_pt_t_val
	202	CASE ( 'bc_q_b' )
	203	READ ( 13 ) bc_q_b
	204	CASE ( 'bc_q_t' )
	205	READ ( 13 ) bc_q_t
	206	CASE ( 'bc_q_t_val' )
	207	READ ( 13 ) bc_q_t_val
	208	CASE ( 'bc_s_b' )
	209	READ ( 13 ) bc_s_b
	210	CASE ( 'bc_s_t' )
	211	READ ( 13 ) bc_s_t
[95]	212	CASE ( 'bc_sa_t' )
	213	READ ( 13 ) bc_sa_t
[1]	214	CASE ( 'bc_uv_b' )
	215	READ ( 13 ) bc_uv_b
	216	CASE ( 'bc_uv_t' )
	217	READ ( 13 ) bc_uv_t
[95]	218	CASE ( 'bottom_salinityflux' )
	219	READ ( 13 ) bottom_salinityflux
[1]	220	CASE ( 'building_height' )
	221	READ ( 13 ) building_height
	222	CASE ( 'building_length_x' )
	223	READ ( 13 ) building_length_x
	224	CASE ( 'building_length_y' )
	225	READ ( 13 ) building_length_y
	226	CASE ( 'building_wall_left' )
	227	READ ( 13 ) building_wall_left
	228	CASE ( 'building_wall_south' )
	229	READ ( 13 ) building_wall_south
[138]	230	CASE ( 'canopy_mode' )
	231	READ ( 13 ) canopy_mode
[240]	232	CASE ( 'canyon_height' )
	233	READ ( 13 ) canyon_height
	234	CASE ( 'canyon_width_x' )
	235	READ ( 13 ) canyon_width_x
	236	CASE ( 'canyon_width_y' )
	237	READ ( 13 ) canyon_width_y
	238	CASE ( 'canyon_wall_left' )
	239	READ ( 13 ) canyon_wall_left
	240	CASE ( 'canyon_wall_south' )
	241	READ ( 13 ) canyon_wall_south
[1]	242	CASE ( 'cloud_droplets' )
	243	READ ( 13 ) cloud_droplets
	244	CASE ( 'cloud_physics' )
	245	READ ( 13 ) cloud_physics
	246	CASE ( 'conserve_volume_flow' )
	247	READ ( 13 ) conserve_volume_flow
[241]	248	CASE ( 'conserve_volume_flow_mode' )
	249	READ ( 13 ) conserve_volume_flow_mode
[291]	250	CASE ( 'coupling_start_time' )
	251	READ ( 13 ) coupling_start_time
[153]	252	CASE ( 'cthf' )
	253	READ ( 13 ) cthf
[1]	254	CASE ( 'current_timestep_number' )
	255	READ ( 13 ) current_timestep_number
	256	CASE ( 'cut_spline_overshoot' )
	257	READ ( 13 ) cut_spline_overshoot
	258	CASE ( 'damp_level_1d' )
	259	READ ( 13 ) damp_level_1d
	260	CASE ( 'dissipation_1d' )
	261	READ ( 13 ) dissipation_1d
[240]	262	CASE ( 'dp_external' )
	263	READ ( 13 ) dp_external
	264	CASE ( 'dp_level_b' )
	265	READ ( 13 ) dp_level_b
	266	CASE ( 'dp_smooth' )
	267	READ ( 13 ) dp_smooth
	268	CASE ( 'dpdxy' )
	269	READ ( 13 ) dpdxy
[138]	270	CASE ( 'drag_coefficient' )
	271	READ ( 13 ) drag_coefficient
[1]	272	CASE ( 'dt_fixed' )
[336]	273	READ ( 13 ) ldum ! restart files created before rev 333
	274	! contained dt_fixed by mistake; it is still
	275	! read here in order to allow usage of these
	276	! older restart files; can be removed in a
	277	! later version
[1]	278	CASE ( 'dt_pr_1d' )
	279	READ ( 13 ) dt_pr_1d
	280	CASE ( 'dt_run_control_1d' )
	281	READ ( 13 ) dt_run_control_1d
	282	CASE ( 'dt_3d' )
	283	READ ( 13 ) dt_3d
	284	CASE ( 'dvrp_filecount' )
	285	READ ( 13 ) dvrp_filecount
	286	CASE ( 'dx' )
	287	READ ( 13 ) dx
	288	CASE ( 'dy' )
	289	READ ( 13 ) dy
	290	CASE ( 'dz' )
	291	READ ( 13 ) dz
	292	CASE ( 'dz_max' )
	293	READ ( 13 ) dz_max
	294	CASE ( 'dz_stretch_factor' )
	295	READ ( 13 ) dz_stretch_factor
	296	CASE ( 'dz_stretch_level' )
	297	READ ( 13 ) dz_stretch_level
	298	CASE ( 'e_min' )
	299	READ ( 13 ) e_min
	300	CASE ( 'end_time_1d' )
	301	READ ( 13 ) end_time_1d
	302	CASE ( 'fft_method' )
	303	READ ( 13 ) fft_method
	304	CASE ( 'first_call_advec_particles' )
	305	READ ( 13 ) first_call_advec_particles
	306	CASE ( 'galilei_transformation' )
	307	READ ( 13 ) galilei_transformation
	308	CASE ( 'grid_matching' )
	309	READ ( 13 ) grid_matching
	310	CASE ( 'hom' )
	311	READ ( 13 ) hom
[143]	312	CASE ( 'hom_sum' )
	313	READ ( 13 ) hom_sum
[151]	314	CASE ( 'humidity' )
	315	READ ( 13 ) humidity
	316	CASE ( 'inflow_damping_factor' )
	317	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	318	ALLOCATE( inflow_damping_factor(0:nz+1) )
	319	ENDIF
	320	READ ( 13 ) inflow_damping_factor
	321	CASE ( 'inflow_damping_height' )
	322	READ ( 13 ) inflow_damping_height
	323	CASE ( 'inflow_damping_width' )
	324	READ ( 13 ) inflow_damping_width
[1]	325	CASE ( 'inflow_disturbance_begin' )
	326	READ ( 13 ) inflow_disturbance_begin
	327	CASE ( 'inflow_disturbance_end' )
	328	READ ( 13 ) inflow_disturbance_end
	329	CASE ( 'km_constant' )
	330	READ ( 13 ) km_constant
	331	CASE ( 'km_damp_max' )
	332	READ ( 13 ) km_damp_max
[138]	333	CASE ( 'lad' )
	334	READ ( 13 ) lad
	335	CASE ( 'lad_surface' )
	336	READ ( 13 ) lad_surface
	337	CASE ( 'lad_vertical_gradient' )
	338	READ ( 13 ) lad_vertical_gradient
	339	CASE ( 'lad_vertical_gradient_level' )
	340	READ ( 13 ) lad_vertical_gradient_level
	341	CASE ( 'lad_vertical_gradient_level_in' )
	342	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	343	CASE ( 'last_dt_change' )
	344	READ ( 13 ) last_dt_change
[153]	345	CASE ( 'leaf_surface_concentration' )
	346	READ ( 13 ) leaf_surface_concentration
[1]	347	CASE ( 'long_filter_factor' )
	348	READ ( 13 ) long_filter_factor
[63]	349	CASE ( 'loop_optimization' )
	350	READ ( 13 ) loop_optimization
[151]	351	CASE ( 'mean_inflow_profiles' )
	352	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	353	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	354	ENDIF
	355	READ ( 13 ) mean_inflow_profiles
[1]	356	CASE ( 'mixing_length_1d' )
	357	READ ( 13 ) mixing_length_1d
	358	CASE ( 'momentum_advec' )
	359	READ ( 13 ) momentum_advec
	360	CASE ( 'netcdf_precision' )
	361	READ ( 13 ) netcdf_precision
	362	CASE ( 'nsor_ini' )
	363	READ ( 13 ) nsor_ini
	364	CASE ( 'nx' )
	365	READ ( 13 ) nx
[147]	366	nx_on_file = nx
[1]	367	CASE ( 'ny' )
	368	READ ( 13 ) ny
[147]	369	ny_on_file = ny
[94]	370	CASE ( 'ocean' )
	371	READ ( 13 ) ocean
[1]	372	CASE ( 'old_dt' )
	373	READ ( 13 ) old_dt
	374	CASE ( 'omega' )
	375	READ ( 13 ) omega
	376	CASE ( 'outflow_damping_width' )
	377	READ ( 13 ) outflow_damping_width
[345]	378	CASE ( 'output_for_t0' )
	379	READ (13) output_for_t0
[1]	380	CASE ( 'overshoot_limit_e' )
	381	READ ( 13 ) overshoot_limit_e
	382	CASE ( 'overshoot_limit_pt' )
	383	READ ( 13 ) overshoot_limit_pt
	384	CASE ( 'overshoot_limit_u' )
	385	READ ( 13 ) overshoot_limit_u
	386	CASE ( 'overshoot_limit_v' )
	387	READ ( 13 ) overshoot_limit_v
	388	CASE ( 'overshoot_limit_w' )
	389	READ ( 13 ) overshoot_limit_w
	390	CASE ( 'passive_scalar' )
	391	READ ( 13 ) passive_scalar
[138]	392	CASE ( 'pch_index' )
	393	READ ( 13 ) pch_index
[1]	394	CASE ( 'phi' )
	395	READ ( 13 ) phi
[138]	396	CASE ( 'plant_canopy' )
	397	READ ( 13 ) plant_canopy
[1]	398	CASE ( 'prandtl_layer' )
	399	READ ( 13 ) prandtl_layer
	400	CASE ( 'precipitation' )
	401	READ ( 13 ) precipitation
	402	CASE ( 'pt_init' )
	403	READ ( 13 ) pt_init
[57]	404	CASE ( 'pt_reference' )
	405	READ ( 13 ) pt_reference
[1]	406	CASE ( 'pt_surface' )
	407	READ ( 13 ) pt_surface
	408	CASE ( 'pt_surface_initial_change' )
	409	READ ( 13 ) pt_surface_initial_change
	410	CASE ( 'pt_vertical_gradient' )
	411	READ ( 13 ) pt_vertical_gradient
	412	CASE ( 'pt_vertical_gradient_level' )
	413	READ ( 13 ) pt_vertical_gradient_level
	414	CASE ( 'pt_vertical_gradient_level_ind' )
	415	READ ( 13 ) pt_vertical_gradient_level_ind
	416	CASE ( 'q_init' )
	417	READ ( 13 ) q_init
	418	CASE ( 'q_surface' )
	419	READ ( 13 ) q_surface
	420	CASE ( 'q_surface_initial_change' )
	421	READ ( 13 ) q_surface_initial_change
	422	CASE ( 'q_vertical_gradient' )
	423	READ ( 13 ) q_vertical_gradient
	424	CASE ( 'q_vertical_gradient_level' )
	425	READ ( 13 ) q_vertical_gradient_level
	426	CASE ( 'q_vertical_gradient_level_ind' )
	427	READ ( 13 ) q_vertical_gradient_level_ind
	428	CASE ( 'radiation' )
	429	READ ( 13 ) radiation
	430	CASE ( 'random_generator' )
	431	READ ( 13 ) random_generator
	432	CASE ( 'random_heatflux' )
	433	READ ( 13 ) random_heatflux
[151]	434	CASE ( 'recycling_width' )
	435	READ ( 13 ) recycling_width
[1]	436	CASE ( 'rif_max' )
	437	READ ( 13 ) rif_max
	438	CASE ( 'rif_min' )
	439	READ ( 13 ) rif_min
	440	CASE ( 'roughness_length' )
	441	READ ( 13 ) roughness_length
	442	CASE ( 'runnr' )
	443	READ ( 13 ) runnr
[291]	444	CASE ( 'run_coupled' )
	445	READ ( 13 ) run_coupled
[94]	446	CASE ( 'sa_init' )
	447	READ ( 13 ) sa_init
	448	CASE ( 'sa_surface' )
	449	READ ( 13 ) sa_surface
	450	CASE ( 'sa_vertical_gradient' )
	451	READ ( 13 ) sa_vertical_gradient
	452	CASE ( 'sa_vertical_gradient_level' )
	453	READ ( 13 ) sa_vertical_gradient_level
[1]	454	CASE ( 'scalar_advec' )
	455	READ ( 13 ) scalar_advec
[153]	456	CASE ( 'scalar_exchange_coefficient' )
	457	READ ( 13 ) scalar_exchange_coefficient
[1]	458	CASE ( 'simulated_time' )
	459	READ ( 13 ) simulated_time
	460	CASE ( 'surface_heatflux' )
	461	READ ( 13 ) surface_heatflux
	462	CASE ( 'surface_pressure' )
	463	READ ( 13 ) surface_pressure
	464	CASE ( 'surface_scalarflux' )
	465	READ ( 13 ) surface_scalarflux
	466	CASE ( 'surface_waterflux' )
	467	READ ( 13 ) surface_waterflux
	468	CASE ( 's_surface' )
	469	READ ( 13 ) s_surface
	470	CASE ( 's_surface_initial_change' )
	471	READ ( 13 ) s_surface_initial_change
	472	CASE ( 's_vertical_gradient' )
	473	READ ( 13 ) s_vertical_gradient
	474	CASE ( 's_vertical_gradient_level' )
	475	READ ( 13 ) s_vertical_gradient_level
[102]	476	CASE ( 'time_coupling' )
	477	READ ( 13 ) time_coupling
[1]	478	CASE ( 'time_disturb' )
	479	READ ( 13 ) time_disturb
	480	CASE ( 'time_dopr' )
	481	READ ( 13 ) time_dopr
	482	CASE ( 'time_dopr_av' )
	483	READ ( 13 ) time_dopr_av
	484	CASE ( 'time_dopr_listing' )
	485	READ ( 13 ) time_dopr_listing
	486	CASE ( 'time_dopts' )
	487	READ ( 13 ) time_dopts
	488	CASE ( 'time_dosp' )
	489	READ ( 13 ) time_dosp
	490	CASE ( 'time_dots' )
	491	READ ( 13 ) time_dots
	492	CASE ( 'time_do2d_xy' )
	493	READ ( 13 ) time_do2d_xy
	494	CASE ( 'time_do2d_xz' )
	495	READ ( 13 ) time_do2d_xz
	496	CASE ( 'time_do2d_yz' )
	497	READ ( 13 ) time_do2d_yz
	498	CASE ( 'time_do3d' )
	499	READ ( 13 ) time_do3d
	500	CASE ( 'time_do_av' )
	501	READ ( 13 ) time_do_av
	502	CASE ( 'time_do_sla' )
	503	READ ( 13 ) time_do_sla
	504	CASE ( 'time_dvrp' )
	505	READ ( 13 ) time_dvrp
	506	CASE ( 'time_restart' )
	507	READ ( 13 ) time_restart
	508	CASE ( 'time_run_control' )
	509	READ ( 13 ) time_run_control
[291]	510	CASE ( 'time_since_reference_point' )
	511	READ ( 13 ) time_since_reference_point
[116]	512	CASE ( 'time_sort_particles' )
	513	READ ( 13 ) time_sort_particles
[1]	514	CASE ( 'timestep_scheme' )
	515	READ ( 13 ) timestep_scheme
	516	CASE ( 'topography' )
	517	READ ( 13 ) topography
[256]	518	CASE ( 'topography_grid_convention' )
	519	READ ( 13 ) topography_grid_convention
[19]	520	CASE ( 'top_heatflux' )
	521	READ ( 13 ) top_heatflux
[102]	522	CASE ( 'top_momentumflux_u' )
	523	READ ( 13 ) top_momentumflux_u
	524	CASE ( 'top_momentumflux_v' )
	525	READ ( 13 ) top_momentumflux_v
[94]	526	CASE ( 'top_salinityflux' )
	527	READ ( 13 ) top_salinityflux
[1]	528	CASE ( 'tsc' )
	529	READ ( 13 ) tsc
[151]	530	CASE ( 'turbulent_inflow' )
	531	READ ( 13 ) turbulent_inflow
[241]	532	CASE ( 'u_bulk' )
	533	READ ( 13 ) u_bulk
[1]	534	CASE ( 'u_init' )
	535	READ ( 13 ) u_init
	536	CASE ( 'u_max' )
	537	READ ( 13 ) u_max
	538	CASE ( 'u_max_ijk' )
	539	READ ( 13 ) u_max_ijk
	540	CASE ( 'ug' )
	541	READ ( 13 ) ug
	542	CASE ( 'ug_surface' )
	543	READ ( 13 ) ug_surface
	544	CASE ( 'ug_vertical_gradient' )
	545	READ ( 13 ) ug_vertical_gradient
	546	CASE ( 'ug_vertical_gradient_level' )
	547	READ ( 13 ) ug_vertical_gradient_level
	548	CASE ( 'ug_vertical_gradient_level_ind' )
	549	READ ( 13 ) ug_vertical_gradient_level_ind
	550	CASE ( 'ups_limit_e' )
	551	READ ( 13 ) ups_limit_e
	552	CASE ( 'ups_limit_pt' )
	553	READ ( 13 ) ups_limit_pt
	554	CASE ( 'ups_limit_u' )
	555	READ ( 13 ) ups_limit_u
	556	CASE ( 'ups_limit_v' )
	557	READ ( 13 ) ups_limit_v
	558	CASE ( 'ups_limit_w' )
	559	READ ( 13 ) ups_limit_w
	560	CASE ( 'use_surface_fluxes' )
	561	READ ( 13 ) use_surface_fluxes
[20]	562	CASE ( 'use_top_fluxes' )
	563	READ ( 13 ) use_top_fluxes
[1]	564	CASE ( 'use_ug_for_galilei_tr' )
	565	READ ( 13 ) use_ug_for_galilei_tr
	566	CASE ( 'use_upstream_for_tke' )
	567	READ ( 13 ) use_upstream_for_tke
[241]	568	CASE ( 'v_bulk' )
	569	READ ( 13 ) v_bulk
[1]	570	CASE ( 'v_init' )
	571	READ ( 13 ) v_init
	572	CASE ( 'v_max' )
	573	READ ( 13 ) v_max
	574	CASE ( 'v_max_ijk' )
	575	READ ( 13 ) v_max_ijk
	576	CASE ( 'vg' )
	577	READ ( 13 ) vg
	578	CASE ( 'vg_surface' )
	579	READ ( 13 ) vg_surface
	580	CASE ( 'vg_vertical_gradient' )
	581	READ ( 13 ) vg_vertical_gradient
	582	CASE ( 'vg_vertical_gradient_level' )
	583	READ ( 13 ) vg_vertical_gradient_level
	584	CASE ( 'vg_vertical_gradient_level_ind' )
	585	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	586	CASE ( 'volume_flow_area' )
	587	READ ( 13 ) volume_flow_area
	588	CASE ( 'volume_flow_initial' )
	589	READ ( 13 ) volume_flow_initial
[1]	590	CASE ( 'wall_adjustment' )
	591	READ ( 13 ) wall_adjustment
	592	CASE ( 'w_max' )
	593	READ ( 13 ) w_max
	594	CASE ( 'w_max_ijk' )
	595	READ ( 13 ) w_max_ijk
	596
	597	CASE DEFAULT
[257]	598	WRITE( message_string, * ) 'unknown variable named "', &
	599	TRIM( variable_chr ), '" found in', &
	600	' data from prior run on PE ', myid
	601	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	602	END SELECT
	603	!
	604	!-- Read next string
	605	READ ( 13 ) variable_chr
	606
	607	ENDDO
	608
	609
[146]	610	END SUBROUTINE read_var_list
[143]	611
[146]	612
	613
[147]	614	SUBROUTINE read_parts_of_var_list
	615
	616	!------------------------------------------------------------------------------!
	617	! Description:
	618	! ------------
	619	! Skipping the global control variables from restart-file (binary format)
	620	! except some informations needed when reading restart data from a previous
[151]	621	! run which used a smaller total domain or/and a different domain decomposition.
[147]	622	!------------------------------------------------------------------------------!
	623
[151]	624	USE arrays_3d
[147]	625	USE control_parameters
	626	USE indices
	627	USE pegrid
	628	USE statistics
	629
	630	IMPLICIT NONE
	631
	632	CHARACTER (LEN=10) :: version_on_file
	633	CHARACTER (LEN=30) :: variable_chr
	634
	635	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	636	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	637
[151]	638	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	639	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	640
	641
	642	CALL check_open( 13 )
	643
	644	WRITE (9,*) 'rpovl: after check open 13'
	645	CALL local_flush( 9 )
	646	READ ( 13 ) version_on_file
	647
	648	!
	649	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	650	!-- run
	651	READ ( 13 ) variable_chr
	652	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	653	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	654	'run on PE ', myid
[257]	655	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	656	ENDIF
	657	READ ( 13 ) numprocs_previous_run
	658
	659	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	660	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	661	ENDIF
	662
	663	READ ( 13 ) variable_chr
	664	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	665	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	666	'prior run on PE ', myid
	667	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	668	ENDIF
	669	READ ( 13 ) hor_index_bounds_previous_run
	670
	671	!
	672	!-- Read vertical number of gridpoints and number of different areas used
	673	!-- for computing statistics. Allocate arrays depending on these values,
	674	!-- which are needed for the following read instructions.
	675	READ ( 13 ) variable_chr
	676	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	677	message_string = 'nz not found in restart data file'
	678	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	679	ENDIF
	680	READ ( 13 ) nz_on_file
	681	IF ( nz_on_file /= nz ) THEN
[257]	682	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	683	'gridpoints along z', &
	684	'&nz on file = "', nz_on_file, '"', &
	685	'&nz from run = "', nz, '"'
[257]	686	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	687	ENDIF
	688
	689	READ ( 13 ) variable_chr
	690	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	691	message_string = 'max_pr_user not found in restart data file'
	692	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	693	ENDIF
	694	READ ( 13 ) max_pr_user_on_file
[170]	695	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	696	WRITE( message_string, * ) 'number of user profiles on res', &
	697	'tart data file differs from the current ', &
	698	'run&max_pr_user on file = "', &
	699	max_pr_user_on_file, '"', &
	700	'&max_pr_user from run = "', &
[257]	701	max_pr_user, '"'
	702	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	703	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	704	ELSE
	705	tmp_mpru = max_pr_user
[147]	706	ENDIF
	707
	708	READ ( 13 ) variable_chr
	709	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	710	message_string = 'statistic_regions not found in restart data file'
	711	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	712	ENDIF
	713	READ ( 13 ) statistic_regions_on_file
[173]	714	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	715	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	716	'differ from the current run', &
	717	'&statistic regions on file = "', &
	718	statistic_regions_on_file, '"', &
	719	'&statistic regions from run = "', &
	720	statistic_regions, '"', &
[257]	721	'&statistic data may be lost!'
	722	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	723	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	724	ELSE
	725	tmp_sr = statistic_regions
[147]	726	ENDIF
	727
	728
	729	!
	730	!-- Now read and check some control parameters and skip the rest
	731	WRITE (9,*) 'wpovl: begin reading variables'
	732	CALL local_flush( 9 )
	733	READ ( 13 ) variable_chr
	734
	735	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	736
	737	SELECT CASE ( TRIM( variable_chr ) )
	738
[151]	739	CASE ( 'average_count_pr' )
	740	READ ( 13 ) average_count_pr
[257]	741	IF ( average_count_pr /= 0 ) THEN
[274]	742	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	743	'averaged. &Averaging will be done now using ', &
	744	average_count_pr, ' samples.'
	745	CALL message( 'read_parts_of_var_list', 'PA0309', &
	746	0, 1, 0, 6, 0 )
[151]	747	ENDIF
	748
[147]	749	CASE ( 'hom' )
	750	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	751	0:statistic_regions_on_file) )
	752	READ ( 13 ) hom_on_file
[170]	753	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	754	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	755	DEALLOCATE( hom_on_file )
	756
[151]	757	CASE ( 'hom_sum' )
	758	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	759	0:statistic_regions_on_file) )
	760	READ ( 13 ) hom_sum_on_file
[170]	761	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	762	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	763	DEALLOCATE( hom_sum_on_file )
	764
[147]	765	CASE ( 'nx' )
	766	READ ( 13 ) nx_on_file
	767
	768	CASE ( 'ny' )
	769	READ ( 13 ) ny_on_file
	770
	771
	772	CASE DEFAULT
	773
	774	READ ( 13 ) idum
	775
	776	END SELECT
	777
	778	READ ( 13 ) variable_chr
	779
	780	ENDDO
	781
[151]	782	!
	783	!-- Calculate the temporal average of vertical profiles, if neccessary
	784	IF ( average_count_pr /= 0 ) THEN
	785	hom_sum = hom_sum / REAL( average_count_pr )
	786	ENDIF
[147]	787
[151]	788
[147]	789	END SUBROUTINE read_parts_of_var_list
	790
	791
	792
[146]	793	SUBROUTINE skip_var_list
	794
	795	!------------------------------------------------------------------------------!
	796	! Description:
	797	! ------------
	798	! Skipping the global control variables from restart-file (binary format)
	799	!------------------------------------------------------------------------------!
	800
[147]	801	IMPLICIT NONE
	802
[146]	803	CHARACTER (LEN=10) :: version_on_file
	804	CHARACTER (LEN=30) :: variable_chr
	805
	806	INTEGER :: idum
	807
	808
[147]	809	WRITE (9,*) 'skipvl #1'
	810	CALL local_flush( 9 )
[146]	811	READ ( 13 ) version_on_file
	812
[147]	813	WRITE (9,*) 'skipvl before variable_chr'
	814	CALL local_flush( 9 )
[146]	815	READ ( 13 ) variable_chr
[147]	816	WRITE (9,*) 'skipvl after variable_chr'
	817	CALL local_flush( 9 )
[146]	818
	819	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	820
[147]	821	WRITE (9,*) 'skipvl chr = ', variable_chr
	822	CALL local_flush( 9 )
[146]	823	READ ( 13 ) idum
	824	READ ( 13 ) variable_chr
	825
	826	ENDDO
[147]	827	WRITE (9,*) 'skipvl last'
	828	CALL local_flush( 9 )
[146]	829
	830
	831	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |